类列表

以下是类、结构、联合体和接口相关的简要说明:

[detail level 12345]

NXOpen	Provides classes and interfaces for the NX Open Common API
Annotations	Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations
AddTicBuilder	Represents a Annotations::AddTicBuilder
AngularDimension	Represents an angular dimension Abstract class Created in NX4.0.0
AngularDimensionBuilder	Represents a Annotations::AngularDimension builder This is an abstract class and cannot be instantiated
AngularTolerance	Represents angular tolerance Created in NX4.0.0
Annotation	Represents an annotation / PMI (Product and Manufacturing Information) display instance object
AssociativeOriginData	Describes the geometry that an annotation's origin is associated with
AnnotationManager	Represents an object that manages annotation and PMI (Product and Manufacturing Information) display instance objects
AnnotationPlacement	Represents an object that journals the adding of a leader and setting of the origin for dialogs that use a builder Created in NX5.0.0
AppendedText	Represents Appended text Created in NX4.0.0
AppendedTextBuilder	This class is used to set/access the appended text of a dimension This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
AppendedTextEditorBuilder	Represents a Annotations::AppendedTextEditorBuilder builder To create a new instance of this class, use Annotations::DimensionCollection::CreateAppendedTextEditorBuilder Created in NX9.0.0
ArbitraryAreaSeedBuilder	Represents a Annotations::ArbitraryAreaSeedBuilder To create a new instance of this class, use Annotations::PmiManager::CreateArbitraryAreaSeedBuilder Created in NX6.0.0
ArbitraryAreaSeedBuilderList	Represents a list of objects
ArbitraryTarget	Represents an arbitrary datum target
ArbitraryTargetData	Represents arbitrary datum target data Created in NX4.0.0
ArcComponent	Represents a single arc in an annotation and can be queried for information about that arc
ArcLengthDimension	Represents an arc length dimension To create or edit an instance of this class, use Annotations::CurveLengthDimensionBuilder Created in NX4.0.0
AreaTarget	Represents an area target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
ArrowComponent	Represents a single arrow in an annotation and can be queried for information about that arrow
AssociateDimensionBuilder	Represents a Annotations::AssociateDimensionBuilder To create a new instance of this class, use Annotations::AnnotationManager::CreateAssociateDimensionBuilder Created in NX5.0.0
AssociatedObject	Represents the objects to which the PMI applies
AssociatedObjectsBuilder	The associated objects builder is used to store objects which annotations are associated to Created in NX6.0.0
AssociativeText	Associative text class creates text associated to object and part attributes as well as object properties such as a drawing sheet name
Associativity	Represents an associativity object
AssociativityBuilder	Represents a Annotations::AssociativityBuilder To create a new instance of this class, use Annotations::AnnotationManager::CreateAssociativityBuilder Created in NX5.0.0
AutomaticCenterlineBuilder	Builder for creating Automatic Centerlines <br> To create a new instance of this class, use @link Annotations::CenterlineCollection::CreateAutomaticCenterlineBuilder Annotations::CenterlineCollection::CreateAutomaticCenterlineBuilder @endlink <br> Default values
BalloonNote	Represents a Balloon Note To create or edit an instance of this class, use Annotations::BalloonNoteBuilder Created in NX6.0.0
BalloonNoteBuilder	Represents a Annotations::BalloonNote builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateBalloonNoteBuilder Created in NX6.0.0
BaseAngularDimension	Represents an angular dimension Abstract class Created in NX9.0.0
BaseAngularDimensionBuilder	Represents a Annotations::AngularDimension builder This is an abstract class and cannot be instantiated
BaseArcLengthDimension	Represents a arc length dimension Abstract class Created in NX6.0.0
BaseArrow	Represents a BaseArrow There is no KF creator for this class
BaseCenterline3d	Represents a Base 3D centerline This is an abstract class
BaseCenterline3dBuilder	Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines This is an abstract class, and cannot be instantiated
BaseCenterMark	Represents a base center mark class This is an abstract class
BaseCenterMarkBuilder	Represents a Base CenterMark Builder for Pmi and Drafting centermark This is an abstract class, and cannot be instantiated
BaseChamferDimension	Represents a chamfer dimension Abstract class Created in NX6.0.0
BaseChamferDimensionBuilder	Represents a Annotations::BaseChamferDimension builder This is an abstract class and cannot be instantiated
BaseConcentricCircleDimension	Represents a concentric circle dimension Abstract class Created in NX6.0.0
BaseCurveLengthDimensionBuilder	Represents a Annotations::BaseArcLengthDimension builder This is an abstract class and cannot be instantiated
BaseCustomSymbol	Represents a base custom symbol This is an abstract class and cannot be directly instantiated Created in NX4.0.0
BaseCustomSymbolBuilder	Represents a base Builder for Drafting and PMI Custom Symbol This is an abstract class, and cannot be instantiated
BaseCylindricalDimension	Represents a cylindrical dimension Abstract class Created in NX6.0.0
BaseDatum	Represents a datum This is an abstract class, and cannot be created
BaseDatumTarget	Represents a datum target This is an abstract class, and cannot be created
BaseDiameterDimension	Represents a diameter dimension Abstract class Created in NX6.0.0
BaseFcf	Represents a datum This is an abstract class, and cannot be created
BaseFoldedRadiusDimension	Represents a folded radius dimension Abstract class Created in NX6.0.0
BaseFrameBar	Represents a base frame bar class This is an abstract class and cannot be directly instantiated Created in NX8.0.0
BaseFrameBarBuilder	Represents a Annotations::BaseFrameBarBuilder
BaseHoleDimension	Represents a hole dimension Abstract class Created in NX6.0.0
BaseHorizontalDimension	Represents a horizontal dimension Abstract class Created in NX6.0.0
BaseLinearDimensionBuilder	Represents a Annotations::Dimension builder This is an abstract class and cannot be instantiated
BaselineDimension	Represents a baseline dimension
BaseNote	Represents a Note This is an abstract class and cannot be directly instantiated Created in NX6.0.0
BaseOrdinateDimensionBuilder	Represents a Annotations::OrdinateDimension builder This is an abstract class and cannot be instantiated
BaseParallelDimension	Represents a parallel dimension Abstract class Created in NX6.0.0
BasePerpendicularDimension	Represents a perpendicular dimension Abstract class Created in NX6.0.0
BaseRadialDimensionBuilder	Represents a Annotations::Dimension builder This is an abstract class and cannot be instantiated
BaseRadiusDimension	Represents a radius dimension Abstract class Created in NX6.0.0
BaseRapidDimensionBuilder	Represents a Annotations::Dimension builder This is an abstract class and cannot be instantiated
BaseSurfaceFinish	Represents a Base Surface Finish This is an abstract class, and cannot be instantiated
BaseSurfaceFinishBuilder	Represents a Annotations::BaseSurfaceFinish builder This is an abstract class, and cannot be instantiated
BaseSymbolBuilder	Represents a Base Symbol Builder This is an abstract class, and cannot be instantiated
BaseThicknessDimensionBuilder	Represents a Annotations::BaseThicknessDimensionBuilder builder This is an abstract class and cannot be instantiated
BaseTitleBlockBuilder	Represents a Annotations::BaseTitleBlockBuilder builder
BaseVerticalDimension	Represents a horizontal dimension Abstract class Created in NX6.0.0
BendTable	This class represents a bend table
BendTableBuilder	Represents a Annotations::BendTableBuilder
BendTableCollection	Represents a collection of Annotations::BendTable objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
BendTableSettingsBuilder	Represents a Annotations::BendTableSettingsBuilder Created in NX9.0.0
BillOfMaterialBuilder	Builder for Bill of Material functionality used in Routing
BoltCircleCenterline	Represents a BoltCircleCenterline centerline To create or edit an instance of this class, use Annotations::BoltCircleCenterlineBuilder Created in NX6.0.0
BoltCircleCenterlineBuilder	Represents a BoltCircleCenterlineBuilder Builder <br> To create a new instance of this class, use @link Annotations::CenterlineCollection::CreateBoltCircleCenterlineBuilder Annotations::CenterlineCollection::CreateBoltCircleCenterlineBuilder @endlink <br> Default values
BoundaryBuilder	This builder contains the boundaries that define a crosshatch pattern Created in NX6.0.0
BusinessModifier	Represents a business modifier object
BusinessModifierCollection	Represents a collection of Annotations::BusinessModifier objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
CalloutGroupBuilder	Represents a Annotations::CalloutGroupBuilder To create a new instance of this class, use Annotations::IdSymbolCollection::CreateCalloutGroupBuilder Created in NX7.5.0
Centerline	Represents a drafting centerline This is an abstract class
Centerline2d	Represents a 2D centerline To create or edit an instance of this class, use Annotations::Centerline2dBuilder Created in NX6.0.0
Centerline2dBuilder	Builder for creating 2D Centerline
Centerline2dSettingsBuilder	Represents a Builder for Centerline2dSettings
Centerline3d	Represents a 3D centerline To create or edit an instance of this class, use Annotations::Centerline3dBuilder Created in NX6.0.0
Centerline3dBuilder	Builder for creating 3D Centerline
Centerline3dSettingsBuilder	Represents a Builder for Centerline3dSettings
CenterlineBuilder	Represents a Base Centerline Builder for all types of centerlines This is an abstract class, and cannot be instantiated
CenterlineCollection	Represents a collection of Annotations::Centerline objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
CenterlineSettingsBuilder	Represents a Builder for Centerline Settings
CenterMark	Represents a center mark class To create or edit an instance of this class, use Annotations::CenterMarkBuilder Created in NX6.0.0
CenterMarkBuilder	Builder for creating Center Mark
CenterMarkSettingsBuilder	Represents a Builder for CenterMark Settings
ChainDimension	Represents a chain dimension
ChamferDimension	Represents a chamfer dimension To create or edit an instance of this class, use Annotations::ChamferDimensionBuilder Created in NX4.0.0
ChamferDimensionBuilder	Represents a Annotations::ChamferDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateChamferDimensionBuilder Created in NX9.0.0
ChamferDimensionPreferences	Represents chamfer dimension preferences Created in NX4.0.0
CharacterSpaceFactor	Specifies the standard font character space factor for each of the text types
CircleCenterline	Represents a CircleCenterline centerline This is an abstract class
CircleCenterlineBuilder	Represents a CircleCenterline Builder This is an abstract class
CircleCenterlineSettingsBuilder	Represents a Builder for Circle Centerline Settings Created in NX6.0.0
CircularCenterline	Represents a CircularCenterline centerline To create or edit an instance of this class, use Annotations::CircularCenterlineBuilder Created in NX6.0.0
CircularCenterlineBuilder	Represents a CircularCenterlineBuilder Builder <br> To create a new instance of this class, use @link Annotations::CenterlineCollection::CreateCircularCenterlineBuilder Annotations::CenterlineCollection::CreateCircularCenterlineBuilder @endlink <br> Default values
CircularTarget	Represents a circular datum target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
CircularTargetData	Represents circular datum target data Created in NX4.0.0
CommonWorkflowBuilder	Represents a Annotations::CommonWorkflowBuilder Created in NX9.0.0
CompanyProprietaryInformation	Represents a Company Proprietary Information To create or edit an instance of this class, use Annotations::CompanyProprietaryInformationBuilder Created in NX6.0.0
CompanyProprietaryInformationBuilder	Represents a Annotations::CompanyProprietaryInformation builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateCompanyProprietaryInformationBuilder Created in NX6.0.0
ComponentData	A ComponentData object can be used to query the components of an annotation
CompoundDatumReferenceBuilder	Represents a Annotations::CompoundDatumReferenceBuilder To create a new instance of this class, use Annotations::AnnotationManager::CreateCompoundDatumReferenceBuilder Created in NX6.0.0
ConcentricCircleDimension	Represents a concentric circle dimension To create or edit an instance of this class, use Annotations::ThicknessDimensionBuilder Created in NX4.0.0
CoordinateNote	Represents a Coordinate Note To create or edit an instance of this class, use Annotations::CoordinateNoteBuilder Created in NX6.0.0
CoordinateNoteBuilder	Represents a @link Annotations::CoordinateNote Annotations::CoordinateNote@endlink builder <br> To create a new instance of this class, use @link Annotations::PmiAttributeCollection::CreateCoordinateNoteBuilder Annotations::PmiAttributeCollection::CreateCoordinateNoteBuilder @endlink <br> Default values
CurveLengthDimensionBuilder	Represents a Annotations::ArcLengthDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateCurveLengthDimensionBuilder Created in NX9.0.0
CustomerValueBusinessModifier	Represents business modifier that applies customer values such as CTQ (Critical To Quality), KC (Key Characteristic) to a PMI
CustomerValueBusinessModifierBuilder	Represents a Annotations::CustomerValueBusinessModifier builder To create a new instance of this class, use Annotations::BusinessModifierCollection::CreateCustomerValueBusinessModifierBuilder Created in NX6.0.0
CustomSymbol	Represents a custom symbol To create or edit an instance of this class, use Annotations::DraftingCustomSymbolBuilder Created in NX4.0.0
CustomSymbolCollection	Represents a collection of Annotations::BaseCustomSymbol objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
CustomSymbolData	Represents custom symbol data
CustomSymbolLeaderBuilder	This class is responsible for defining the origin and leader for custom symbol objects
CustomSymbolTextData	Represents custom symbol text data
CutSheetBuilder	Builder for Formboard cut sheet functionality used in formboard
CuttingPlaneSymbol	Represents a Cutting Plane Symbol Created with LightweightSection Created in NX9.0.0
CuttingPlaneSymbolBuilder	Represents a Annotations::CuttingPlaneSymbolBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
CylindricalDimension	Represents a cylindrical dimension To create or edit an instance of this class, use Annotations::LinearDimensionBuilder Created in NX4.0.0
Datum	Represents a datum To create or edit an instance of this class, use Annotations::PmiDatumFeatureSymbolBuilder Created in NX4.0.0
DatumData	Represents datum data Created in NX4.0.0
DatumFeatureSymbolBuilder	Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols This is an abstract class, and cannot be instantiated
DatumReference	Represents a datum reference Created in NX4.0.0
DatumReferenceBuilder	Represents a Annotations::DatumReferenceBuilder To create a new instance of this class, use Annotations::AnnotationManager::CreateEmptyDatumReferenceBuilder Created in NX6.0.0
DatumReferenceBuilderList	Represents a list of objects
DatumTarget	Represents a datum target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
DatumTargetBuilder	Represents a Datum target Builder This is an abstract class, and cannot be instantiated
DatumTargetCollection	Represents a collection of Annotations::DatumTarget objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
DatumTargetData	Represents datum target data Created in NX4.0.0
DefineTitleBlockBuilder	Represents a Annotations::DefineTitleBlockBuilder
DiameterDimension	Represents a diameter dimension To create or edit an instance of this class, use Annotations::RadialDimensionBuilder Created in NX4.0.0
DiameterRadiusPreferences	Represents diameter and radius preferences Created in NX4.0.0
Dimension	Represents a dimension Abstract class Created in NX3.0.0
DimensionCollection	Represents a collection of Annotations::Dimension objects This is an collection class
iterator	Iterator for accessing the contents of the collection
DimensionData	Represents dimension data Created in NX4.0.0
DimensionMeasurementBuilder	Represents a Annotations::DimensionMeasurementBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
DimensionPreferences	Represents dimension preferences Created in NX4.0.0
DimensionSet	Represents a dimension set This is an abstract class
DimensionSetBuilder	Represents a Annotations::DimensionSetBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
DimensionSetCollection	Represents a collection of Annotations::DimensionSet objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
DimensionStyleBuilder	Represents a Annotations::DimensionStyleBuilder
DraftingAid	Represents a drafting aid This is an abstract class
DraftingArbitraryTarget	Represents a drafting arbitrary datum target
DraftingCustomSymbolBuilder	Represents builder for Drafting Custom Symbol To create a new instance of this class, use Annotations::CustomSymbolCollection::CreateDraftingCustomSymbolBuilder Created in NX7.5.0
DraftingDatum	Represents a datum To create or edit an instance of this class, use Annotations::DraftingDatumFeatureSymbolBuilder Created in NX5.0.0
DraftingDatumFeatureSymbolBuilder	Datum feature symbol builder To create a new instance of this class, use Annotations::GdtDatumCollection::CreateDraftingDatumFeatureSymbolBuilder Created in NX6.0.0
DraftingDatumTarget	Represents a datum target To create or edit an instance of this class, use Annotations::DraftingDatumTargetBuilder Created in NX5.0.0
DraftingDatumTargetBuilder	Represents a @link Annotations::DraftingDatumTargetBuilder Annotations::DraftingDatumTargetBuilder@endlink <br> To create a new instance of this class, use @link Annotations::AnnotationManager::CreateDraftingDatumTargetBuilder Annotations::AnnotationManager::CreateDraftingDatumTargetBuilder @endlink <br> Default values
DraftingDatumTargetCollection	Represents a collection of Annotations::DraftingDatumTarget objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX8.0.1
iterator	Iterator for accessing the contents of the collection
DraftingFcf	Represents an FCF To create or edit an instance of this class, use Annotations::DraftingFeatureControlFrameBuilder Created in NX4.0.0
DraftingFeatureControlFrameBuilder	Represents a @link Annotations::DraftingFeatureControlFrameBuilder Annotations::DraftingFeatureControlFrameBuilder@endlink <br> To create a new instance of this class, use @link Annotations::AnnotationManager::CreateDraftingFeatureControlFrameBuilder Annotations::AnnotationManager::CreateDraftingFeatureControlFrameBuilder @endlink <br> Default values
DraftingImage	Represents a drafting image To obtain an instance of this class, use Annotations::DraftingImageCollection
DraftingImageCollection	Represents a collection of Annotations::DraftingImage objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
DraftingLineTarget	Represents a drafting line datum target To create or edit an instance of this class, use Annotations::DraftingDatumTargetBuilder Created in NX4.0.0
DraftingNoteBuilder	Represents a @link Note Note@endlink builder <br> To create a new instance of this class, use @link Annotations::AnnotationManager::CreateDraftingNoteBuilder Annotations::AnnotationManager::CreateDraftingNoteBuilder @endlink <br> Default values
DraftingPointTarget	Represents drafting point datum target To create or edit an instance of this class, use Annotations::DraftingDatumTargetBuilder Created in NX4.0.0
DraftingSurfaceFinish	Represents a Drafting Surface Finish To create or edit an instance of this class, use Annotations::DraftingSurfaceFinishBuilder Created in NX7.5.0
DraftingSurfaceFinishBuilder	Represents a Annotations::DraftingSurfaceFinish builder To create a new instance of this class, use Annotations::DraftingSurfaceFinishCollection::CreateDraftingSurfaceFinishBuilder Created in NX7.5.0
DraftingSurfaceFinishCollection	Represents a collection of Annotations::DraftingSurfaceFinish objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
DrawingFormatTitleBuilder	Represents a Annotations::DrawingFormatTitleBuilder Created in NX9.0.0
DrivingValueBuilder	Created in NX9.0.0
EditLeaderBuilder	Represents a builder that provides an interface to adding and editing leaders to table entities To create a new instance of this class, use Annotations::AnnotationManager::CreateEditLeaderBuilder Created in NX6.0.1
EditSettingsBuilder	Edit settings builder To create a new instance of this class, use Drafting::SettingsManager::CreateAnnotationEditSettingsBuilder Created in NX9.0.0
EditSymbolDisplayBuilder	Represents a EditSymbolPieces builder <br> To create a new instance of this class, use @link Annotations::CustomSymbolCollection::EditSymbolDisplayBuilder Annotations::CustomSymbolCollection::EditSymbolDisplayBuilder @endlink <br> Default values
EditTitleBlockBuilder	Represents a Annotations::EditTitleBlockBuilder builder To create a new instance of this class, use Annotations::TitleBlockCollection::CreateEditTitleBlockBuilder Created in NX8.0.0
EnterpriseIdentification	Represents a Enterprise Identification To create or edit an instance of this class, use Annotations::EnterpriseIdentificationBuilder Created in NX6.0.0
EnterpriseIdentificationBuilder	Represents a Annotations::EnterpriseIdentification builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateEnterpriseIdentificationBuilder Created in NX6.0.0
ExportControl	Represents a Export Control To create or edit an instance of this class, use Annotations::ExportControlBuilder Created in NX6.0.0
ExportControlBuilder	Represents a Annotations::ExportControl builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateExportControlBuilder Created in NX6.0.0
Fcf	Represents an FCF To create or edit an instance of this class, use Annotations::PmiFeatureControlFrameBuilder Created in NX4.0.0
FcfCollection	Represents a collection of Annotations::Fcf objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
FcfData	Represents FCF data Created in NX4.0.0
FcfDatumReference	Represents a Annotations::FcfDatumReference Created in NX6.0.0
FcfFrame	Represents an FCF frame Created in NX4.0.0
FcfFrameData	Represents FCF frames data Created in NX4.0.0
FeatureControlFrameBuilder	Represents a Annotations::FeatureControlFrameBuilder This is an abstract class, and cannot be instantiated
FeatureControlFrameData	Represents a Annotations::FeatureControlFrameData Created in NX6.0.0
FeatureControlFrameDataBuilder	Represents a FeatureControlFrameDataBuilder
FeatureControlFrameDataBuilderList	Represents a list of objects
FeatureIdBusinessModifier	Represents buiness modifier that indicates a featire identification PMI object
FeatureIdBusinessModifierBuilder	Represents a Annotations::FeatureIdBusinessModifier builder To create a new instance of this class, use Annotations::BusinessModifierCollection::CreateFeatureIdBusinessModifierBuilder Created in NX6.0.0
FoldedRadiusDimension	Represents a folded radius dimension To create or edit an instance of this class, use Annotations::RadialDimensionBuilder Created in NX4.0.0
FrameBar	Represents a frame bar class To create or edit an instance of this class, use Annotations::FrameBarBuilder Created in NX8.0.0
FrameBarBuilder	Represents a Annotations::FrameBarBuilder
FrameBarCollection	Represents a collection of Annotations::FrameBar objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
FrameBarElementStyleBuilder	Represents a Annotations::FrameBarElementStyleBuilder
FrameBarPreferences	Represents frame bar preferences
FrameBarStyleBuilder	Represents a Annotations::FrameBarStyleBuilder
Gdt	Represents a Geometric Dimensioning and Tolerancing symbol This is an abstract class, and cannot be instantiated Created in NX3.0.0
GdtCollection	Represents a collection of GDTs To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
GdtDatumCollection	Represents a collection of Annotations::Datum objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
GeneralArcLengthDimension	Represents a arc length dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralChamferDimension	Represents a chamfer dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralConcentricCircleDimension	Represents a concentric circle dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralCustomSymbol	Represents a general custom symbol Created in NX7.0.0
GeneralCylindricalDimension	Represents a horizontal dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralDiameterDimension	Represents a horizontal dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralFoldedRadiusDimension	Represents a folded radius dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralHoleDimension	Represents a hole dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralHorizontalDimension	Represents a horizontal dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralLabel	Represents a General Label To obtain an instance of this class use Annotations::LabelCollection Created in NX7.5.0
GeneralMajorAngularDimension	Represents a major angular dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralMinorAngularDimension	Represents a minor angular dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralNote	Represents a General Note To create or edit an instance of this class, use Annotations::GeneralNoteBuilder Created in NX6.0.0
GeneralNoteBuilder	Represents a Annotations::GeneralNote builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateGeneralNoteBuilder Created in NX6.0.0
GeneralParallelDimension	Represents a parallel dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralPerpendicularDimension	Represents a horizontal dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralRadiusDimension	Represents a radius dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GeneralVerticalDimension	Represents a horizontal dimension To obtain an instance of this class use Annotations::DimensionCollection Created in NX6.0.0
GenericNote	Represents a Generic Note To obtain an instance of this class use Annotations::NoteCollection Created in NX6.0.0
GovernmentSecurityInformation	Represents a Government Security Information To create or edit an instance of this class, use Annotations::GovernmentSecurityInformationBuilder Created in NX6.0.0
GovernmentSecurityInformationBuilder	Represents a Annotations::GovernmentSecurityInformation builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateGovernmentSecurityInformationBuilder Created in NX6.0.0
Hatch	Represents a crosshatch or area fill To create or edit an instance of this class, use Annotations::HatchBuilder Created in NX6.0.0
HatchBuilder	This class is used to construct the crosshatching that lies within a boundary
HatchCollection	Represents a collection of Annotations::Hatch objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
HatchFillSettingsBuilder	This class is used to construct the Crosshatch and area Fill setting block
HatchStyleBuilder	Represents a Annotations::HatchStyleBuilder
HoleCalloutSettingsBuilder	Represents a Annotations::HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s)
HoleDimension	Represents a hole dimension To create or edit an instance of this class, use Annotations::RadialDimensionBuilder Created in NX4.0.0
HoleTable	Represents a Annotations::HoleTable
HoleTableBuilder	Represents a Annotations::HoleTableBuilder
HoleTableCollection	Represents a collection of Annotations::HoleTable objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
HoleTableSettingsContentBuilder	Represents a Annotations::HoleTableSettingsContentBuilder Created in NX9.0.0
HoleTableSettingsFormatBuilder	Represents a Annotations::HoleTableSettingsFormatBuilder Created in NX9.0.0
HoleTableSettingsHoleFiltersBuilder	Represents a Annotations::HoleTableSettingsHoleFiltersBuilder Created in NX9.0.0
HoleTableSettingsLabelBuilder	Represents a Annotations::HoleTableSettingsLabelBuilder Created in NX9.0.0
HoleTableSettingsWorkflowBuilder	Represents a Annotations::HoleTableSettingsWorkflowBuilder Created in NX9.0.0
HorizontalDimension	Represents a horizontal dimension To create or edit an instance of this class, use Annotations::LinearDimensionBuilder Created in NX4.0.0
HorizontalOrdinateDimension	Represents a horizontal ordinate dimension To create or edit an instance of this class, use Annotations::OrdinateDimensionBuilder Created in NX4.0.0
HorizontalOrdinateMargin	Represents a horizontal ordinate margin Created in NX4.0.0
IAngularTolerance	Represents an object that has angular tolerance Created in NX4.0.0
IAppendedText	Represents an object that has appended text Created in NX4.0.0
IArbitraryTarget	Represents interface class for arbitrary datum target areas Created in NX5.0.0
ICircularTarget	Represents interface class for a circular datum target Created in NX4.0.0
IContainer	Represents an object that contains other objects Created in NX4.0.0
IDatum	Represents interface class for a datum Created in NX4.0.0
IDatumTarget	Represents interface class for a datum target Created in NX4.0.0
IdSymbol	Represents an ID symbol To create or edit an instance of this class, use Annotations::IdSymbolBuilder Created in NX5.0.0
IdSymbolBuilder	Represents a @link Annotations::IdSymbol Annotations::IdSymbol@endlink builder <br> To create a new instance of this class, use @link Annotations::IdSymbolCollection::CreateIdSymbolBuilder Annotations::IdSymbolCollection::CreateIdSymbolBuilder @endlink <br> Default values
IdSymbolCollection	Represents a collection of Annotations::IdSymbol objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
IFcf	Represents interface class for a feature control frame Created in NX4.0.0
ILinearTolerance	Represents an object that has linear tolerance Created in NX4.0.0
ILineTarget	Represents interface class for line datum target Created in NX4.0.0
ImportAutocadBlockBuilder	Represents a builder allowing import of AutoCAD blocks
ImportSymbolBuilder	Represents a builder allowing import of one or many foreign symbols
IntersectionSymbol	Represents a intersection symbol To create or edit an instance of this class, use Annotations::IntersectionSymbolBuilder Created in NX6.0.0
IntersectionSymbolBuilder	Represents a @link Annotations::IntersectionSymbol Annotations::IntersectionSymbol@endlink builder <br> To create a new instance of this class, use @link Annotations::IntersectionSymbolCollection::CreateIntersectionSymbolBuilder Annotations::IntersectionSymbolCollection::CreateIntersectionSymbolBuilder @endlink <br> Default values
IntersectionSymbolCollection	Represents a collection of Annotations::IntersectionSymbol objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
IPmi	Represents an object that has PMI(Product and Manufacturing Information) data
IPointTarget	Represents interface class for a point datum target Created in NX4.0.0
IRectangularTarget	Represents interface class for a rectangular datum target Created in NX4.0.0
ISlotDimension	Represents a slot dimension Created in NX9.0.0
Label	Represents a label To create an instance of this class Annotations::AnnotationManager Created in NX3.0.0
LabelCollection	Represents a collection of labels To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
LabelData	Represents label data Created in NX4.0.0
LeaderBuilder	Represents a Annotations::LeaderBuilder
LeaderBundle	Represents the data for all the leaders of an annotation Created in NX3.0.0
LeaderData	Represents a Annotations::LeaderData
LeaderDataList	Represents a list of objects
Lettering	Specifies lettering data
LetteringPreferences	Represents lettering preferences
LetteringStyleBuilder	Represents a Annotations::LetteringStyleBuilder
LightweightSection	Represents a PMI Lightweight Section To create or edit an instance of this class, use Annotations::LightweightSectionBuilder Created in NX7.5.0
LightweightSectionBuilder	Represents a @link Annotations::LightweightSection Annotations::LightweightSection@endlink builder Default values
LightweightSectionView	Represents a PMI Lightweight Section View Created with LightweightSection Created in NX7.5.0
LineAndArrowPreferences	Represents line and arrow preferences Created in NX3.0.0
LinearDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateLinearDimensionBuilder Created in NX9.0.0
LineArrowStyleBuilder	Represents a Annotations::LineArrowStyleBuilder
LinearTolerance	Represents linear tolerance Created in NX4.0.0
LineCfw	Specifies color, font, and width
LineComponent	Represents a single line in an annotation and can be queried for information about that line
LineTarget	Represents a line datum target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
LineWeld	Represents a line weld To create or edit an instance of this class, use Annotations::LineWeldBuilder Created in NX4.0.0
LineWeldBuilder	Represents a @link Annotations::LineWeldBuilder Annotations::LineWeldBuilder@endlink <br> To create a new instance of this class, use @link Annotations::WeldCollection::CreateLineWeldBuilder Annotations::WeldCollection::CreateLineWeldBuilder @endlink <br> Default values
LineWeldData	Represents line weld data Created in NX4.0.0
LineWeldDataBuilder	Represents a Annotations::LineWeldDataBuilder Created in NX6.0.0
LineWeldSideData	Represents line weld side data Created in NX4.0.0
ListBusinessModifier	Represents a base class for list based business modifiers Created in NX4.0.0
LocatorDesignator	Represents a Locator Designator To create or edit an instance of this class, use Annotations::LocatorDesignatorBuilder Created in NX6.0.0
LocatorDesignatorBuilder	Represents a Annotations::LocatorDesignator builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateLocatorDesignatorBuilder Created in NX6.0.0
MajorAngularDimension	Represents a major angular dimension To create or edit an instance of this class, use Annotations::MajorAngularDimensionBuilder Created in NX4.0.0
MajorAngularDimensionBuilder	Represents a Annotations::AngularDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateMajorAngularDimensionBuilder Created in NX9.0.0
MasterCustomSymbol	Represents a custom symbol Created in NX4.0.0
MasterCustomSymbolData	Represents master custom symbol data
MasterSymbol	Represents a part symbol folder To create or edit an instance of this class, use Annotations::MasterSymbolBuilder Created in NX7.5.0
MasterSymbolBuilder	Represents a Builder for MasterSymbol functionality <br> To create a new instance of this class, use @link Annotations::CustomSymbolCollection::CreateMasterSymbolBuilder Annotations::CustomSymbolCollection::CreateMasterSymbolBuilder @endlink <br> Default values
MasterSymbolListItemBuilder	Represents a Annotations::MasterSymbolListItemBuilder To create a new instance of this class, use Annotations::CustomSymbolCollection::CreateMasterSymbolListItemBuilder Created in NX7.5.0
MasterSymbolListItemBuilderList	Represents a list of objects
MaterialSpecification	Represents a Material Specification To create or edit an instance of this class, use Annotations::MaterialSpecificationBuilder Created in NX6.0.0
MaterialSpecificationBuilder	Represents a Annotations::MaterialSpecification builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateMaterialSpecificationBuilder Created in NX6.0.0
MinorAngularDimension	Represents a minor angular dimension To create or edit an instance of this class, use Annotations::MinorAngularDimensionBuilder Created in NX4.0.0
MinorAngularDimensionBuilder	Represents a Annotations::AngularDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateMinorAngularDimensionBuilder Created in NX9.0.0
NarrowDimensionData	Specifies the narrow dimension preferences
NarrowDimensionPreferences	Represents narrow dimension preferences Created in NX4.0.0
Note	Represents a Note To create or edit an instance of this class, use Annotations::DraftingNoteBuilder Created in NX3.0.0
NoteBase	Represents a base class for notes and labels This is an abstract class Created in NX3.0.0
NoteCollection	Represents a collection of notes To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
NoteData	Represents note data Created in NX4.0.0
OffsetCenterPoint	Represents a offset center point To create or edit an instance of this class, use Annotations::OffsetCenterPointBuilder Created in NX6.0.0
OffsetCenterPointBuilder	Represents a @link Annotations::OffsetCenterPoint Annotations::OffsetCenterPoint@endlink builder <br> To create a new instance of this class, use @link Annotations::OffsetCenterPointCollection::CreateOffsetCenterPointBuilder Annotations::OffsetCenterPointCollection::CreateOffsetCenterPointBuilder @endlink <br> Default values
OffsetCenterPointCollection	Represents a collection of Annotations::OffsetCenterPoint objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
OrdinateBaselineBuilder	Represents a builder for an ordinate baseline This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
OrdinateDimension	Represents an ordinate dimension Abstract class Created in NX4.0.0
DoglegPreferences	Specifies the ordinate dogleg preferences
OrdinateDimensionBuilder	Represents a Annotations::OrdinateDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateOrdinateDimensionBuilder Created in NX9.0.0
OrdinateDimensionPreferences	Represents ordinate dimension preferences Created in NX4.0.0
OrdinateMargin	Represents an ordinate margin
OrdinateMarginCollection	Represents a collection of Annotations::OrdinateMargin To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
OrdinateOriginDimension	Represents an ordinate origin dimension There is no KF creator for this class
OrdinateStyleBuilder	Represents a Annotations::OrdinateStyleBuilder
OriginBuilder	Represents a Annotations::OriginBuilder This is a sub-builder class and cannot be directly instantiated Created in NX6.0.0
ParallelDimension	Represents a parallel dimension To create or edit an instance of this class, use Annotations::LinearDimensionBuilder Created in NX4.0.0
PartIdentification	Represents a Part Identification To create or edit an instance of this class, use Annotations::PartIdentificationBuilder Created in NX6.0.0
PartIdentificationBuilder	Represents a Annotations::PartIdentification builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePartIdentificationBuilder Created in NX6.0.0
PartsListBuilder	Represents a Annotations::PartsListBuilder
PartSymbolFolder	Represents a part symbol folder To create or edit an instance of this class, use Annotations::PartSymbolFolderBuilder Created in NX7.5.0
PartSymbolFolderBuilder	Represents a Annotations::PartSymbolFolderBuilder
PartSymbolFolderCollection	Represents a collection of Annotations::PartSymbolFolder objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
PerpendicularDimension	Represents a perpendicular dimension To create or edit an instance of this class, use Annotations::LinearDimensionBuilder Created in NX4.0.0
PinListBuilder	Builder for Formboard pin list functionality used in formboard
PlaneBuilder	Represents a Annotations::PlaneBuilder object
Pmi	Represents a PMI(Product and Manufacturing Information) object
PmiAngularDimension	Represents a PMI angular dimension Abstract class Created in NX9.0.0
PmiAngularDimensionBuilder	Represents a Annotations::AngularDimension builder This is an abstract class and cannot be instantiated
PmiArcLengthDimension	Represents a PMI arc length dimension To create or edit an instance of this class, use Annotations::PmiCurveLengthDimensionBuilder Created in NX4.0.0
PmiAttribute	Represents a Pmi Attribute To create or edit an instance of this class, use Annotations::PmiAttributeBuilder Created in NX6.0.0
PmiAttributeBuilder	Represents a Annotations::PmiAttribute builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeBuilder Created in NX6.0.0
PmiAttributeCollection	Represents a collection of Annotations::PmiAttribute objects
iterator	Iterator for accessing the contents of the collection
PmiAttributeValue	Represents a PMI Attribute Value This is an abstract class
PmiAttributeValueInteger	Represents a PMI Attribute Integer Value To create or edit an instance of this class, use Annotations::PmiAttributeValueIntegerBuilder Created in NX6.0.0
PmiAttributeValueIntegerBuilder	Represents a Annotations::PmiAttributeValueInteger builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueIntegerBuilder Created in NX6.0.0
PmiAttributeValueList	Represents a PMI Attribute List Value To create or edit an instance of this class, use Annotations::PmiAttributeValueListBuilder Created in NX6.0.0
PmiAttributeValueListBuilder	Represents a Annotations::PmiAttributeValueList builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueListBuilder Created in NX6.0.0
PmiAttributeValueMultipleString	Represents a PMI Attribute MultipleString Value To create or edit an instance of this class, use Annotations::PmiAttributeValueMultipleStringBuilder Created in NX6.0.0
PmiAttributeValueMultipleStringBuilder	Represents a Annotations::PmiAttributeValueMultipleString builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueMultipleStringBuilder Created in NX6.0.0
PmiAttributeValueNumber	Represents a PMI Attribute Number Value To create or edit an instance of this class, use Annotations::PmiAttributeValueNumberBuilder Created in NX6.0.0
PmiAttributeValueNumberBuilder	Represents a Annotations::PmiAttributeValueNumber builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueNumberBuilder Created in NX6.0.0
PmiAttributeValueString	Represents a PMI Attribute String Value To create or edit an instance of this class, use Annotations::PmiAttributeValueStringBuilder Created in NX6.0.0
PmiAttributeValueStringBuilder	Represents a Annotations::PmiAttributeValueString builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueStringBuilder Created in NX6.0.0
PmiAttributeValueUrl	Represents a PMI Attribute Url Value To create or edit an instance of this class, use Annotations::PmiAttributeValueUrlBuilder Created in NX6.0.0
PmiAttributeValueUrlBuilder	Represents a Annotations::PmiAttributeValueUrl builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiAttributeValueUrlBuilder Created in NX6.0.0
PmiBaselineDimension	Represents a PMI baseline dimension
PmiCenterline3d	Represents a Pmi 3D centerline To create or edit an instance of this class, use Annotations::PmiCenterline3dBuilder Created in NX7.5.0
PmiCenterline3dBuilder	Builder for creating Pmi 3D Centerline
PmiCenterMark	Represents a PMI Center Mark class To create or edit an instance of this class, use Annotations::PmiCenterMarkBuilder Created in NX7.5.0
PmiCenterMarkBuilder	Builder for creating PMI Center Mark
PmiChainDimension	Represents a PMI chain dimension
PmiChamferDimension	Represents a PMI chamfer dimension To create or edit an instance of this class, use Annotations::PmiChamferDimensionBuilder Created in NX4.0.0
PmiChamferDimensionBuilder	Represents a Annotations::PmiChamferDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiChamferDimensionBuilder Created in NX9.0.0
PmiCollection	Represents a collection of Annotations::Pmi objects
iterator	Iterator for accessing the contents of the collection
PmiConcentricCircleDimension	Represents a PMI concentric circle dimension To create or edit an instance of this class, use Annotations::PmiThicknessDimensionBuilder Created in NX4.0.0
PmiCurveLengthDimensionBuilder	Represents a Annotations::PmiArcLengthDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiCurveLengthDimensionBuilder Created in NX9.0.0
PmiCustomSymbol	Represents a PMI custom symbol To create or edit an instance of this class, use Annotations::PmiCustomSymbolBuilder Created in NX4.0.0
PmiCustomSymbolBuilder	Represents builder for PMI Custom Symbol To create a new instance of this class, use Annotations::CustomSymbolCollection::CreatePmiCustomSymbolBuilder Created in NX7.5.0
PmiCylindricalDimension	Represents a PMI cylindrical dimension To create or edit an instance of this class, use Annotations::PmiLinearDimensionBuilder Created in NX4.0.0
PmiData	Represents PMI(Product and Manufacturing Information) data Created in NX4.0.0
PmiDatumFeatureSymbolBuilder	Datum feature symbol builder To create a new instance of this class, use Annotations::GdtDatumCollection::CreatePmiDatumFeatureSymbolBuilder Created in NX6.0.0
PmiDatumTargetBuilder	Represents a @link Annotations::PmiDatumTargetBuilder Annotations::PmiDatumTargetBuilder@endlink <br> To create a new instance of this class, use @link Annotations::AnnotationManager::CreatePmiDatumTargetBuilder Annotations::AnnotationManager::CreatePmiDatumTargetBuilder @endlink <br> Default values
PmiDiameterDimension	Represents a PMI diameter dimension To create or edit an instance of this class, use Annotations::PmiRadialDimensionBuilder Created in NX4.0.0
PMIExplicitOrderBuilder	This is the Annotations::PMIExplicitOrderBuilder for the explicit order To create a new instance of this class, use Annotations::PmiManager::CreateExplicitOrderBuilder Created in NX9.0.0
PmiFeatureControlFrameBuilder	Represents a Annotations::PmiFeatureControlFrameBuilder To create a new instance of this class, use Annotations::AnnotationManager::CreatePmiFeatureControlFrameBuilder Created in NX6.0.0
PmiFilter	Represents a base class for a PMI filter
PmiFilterByPart	Represents a PMI filter defined by a set of parts
PmiFilterByType	Represents a PMI filter defined by a set of types
PmiFilterByView	Represents a PMI filter defined by a set of views
PmiFilterCollection	Represents the collection of all PMI filters in the part
iterator	Iterator for accessing the contents of the collection
PmiFoldedRadiusDimension	Represents a PMI folded radius dimension To create or edit an instance of this class, use Annotations::PmiRadialDimensionBuilder Created in NX4.0.0
PmiHoleDimension	Represents a PMI hole dimension To create or edit an instance of this class, use Annotations::PmiRadialDimensionBuilder Created in NX5.0.0
PmiHorizontalDimension	Represents a PMI horizontal dimension To create or edit an instance of this class, use Annotations::PmiLinearDimensionBuilder Created in NX4.0.0
PmiHorizontalOrdinateDimension	Represents a PMI horizontal ordinate dimension To create or edit an instance of this class, use Annotations::PmiOrdinateDimensionBuilder Created in NX4.0.0
PmiInteger	Represents a Pmi Integer To create or edit an instance of this class, use Annotations::PmiIntegerBuilder Created in NX6.0.0
PmiIntegerBuilder	Represents a @link Annotations::PmiInteger Annotations::PmiInteger@endlink builder <br> To create a new instance of this class, use @link Annotations::PmiAttributeCollection::CreatePmiIntegerBuilder Annotations::PmiAttributeCollection::CreatePmiIntegerBuilder @endlink <br> Default values
PmiLabel	Represents a PMI label
PmiLightweightSectionCollection	Represents a collection of Annotations::LightweightSection objects To obtain an instance of this class, refer to Annotations::PmiManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
PmiLinearDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiLinearDimensionBuilder Created in NX9.0.0
PmiLineWeld	Represents a PMI line weld To create or edit an instance of this class, use Annotations::PmiLineWeldBuilder Created in NX4.0.0
PmiLineWeldBuilder	Represents a @link Annotations::PmiLineWeld Annotations::PmiLineWeld@endlink builder <br> To create a new instance of this class, use @link Annotations::WeldCollection::CreatePmiLineWeldBuilder Annotations::WeldCollection::CreatePmiLineWeldBuilder @endlink <br> Default values
PmiMajorAngularDimension	Represents a PMI major angular dimension To create or edit an instance of this class, use Annotations::PmiMajorAngularDimensionBuilder Created in NX4.0.0
PmiMajorAngularDimensionBuilder	Represents a Annotations::AngularDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiMajorAngularDimensionBuilder Created in NX9.0.0
PmiManager	Represents an object that manages PMI objects
PmiMinorAngularDimension	Represents a PMI minor angular dimension To create or edit an instance of this class, use Annotations::PmiMinorAngularDimensionBuilder Created in NX4.0.0
PmiMinorAngularDimensionBuilder	Represents a Annotations::AngularDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiMinorAngularDimensionBuilder Created in NX9.0.0
PmiNote	Represents a PMI note To create or edit an instance of this class, use Annotations::PmiNoteBuilder Created in NX4.0.0
PmiNoteBuilder	Represents a Note builder To create a new instance of this class, use Annotations::AnnotationManager::CreatePmiNoteBuilder Created in NX6.0.0
PmiNumber	Represents a Pmi Number To create or edit an instance of this class, use Annotations::PmiNumberBuilder Created in NX6.0.0
PmiNumberBuilder	Represents a @link Annotations::PmiNumber Annotations::PmiNumber@endlink builder <br> To create a new instance of this class, use @link Annotations::PmiAttributeCollection::CreatePmiNumberBuilder Annotations::PmiAttributeCollection::CreatePmiNumberBuilder @endlink <br> Default values
PmiOrdinateDimensionBuilder	Represents a Annotations::OrdinateDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiOrdinateDimensionBuilder Created in NX9.0.0
PmiOrdinateOriginDimension	Represents a PMI ordinate origin dimension There is no KF creator for this class
PmiParallelDimension	Represents a PMI parallel dimension To create or edit an instance of this class, use Annotations::PmiLinearDimensionBuilder Created in NX4.0.0
PmiPerpendicularDimension	Represents a PMI perpendicular dimension To create or edit an instance of this class, use Annotations::PmiLinearDimensionBuilder Created in NX4.0.0
PmiPreferences	Represents line and arrow preferences Created in NX4.0.0
PmiRadialDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiRadialDimensionBuilder Created in NX9.0.0
PmiRadiusDimension	Represents a PMI radius dimension To create or edit an instance of this class, use Annotations::PmiRadialDimensionBuilder Created in NX4.0.0
PmiRapidDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiRapidDimensionBuilder Created in NX9.0.0
PmiRegionCollection	Represents a collection of Annotations::Region objects To obtain an instance of this class, refer to Annotations::PmiManager Created in NX6.0.2
iterator	Iterator for accessing the contents of the collection
PmiString	Represents a Pmi String To create or edit an instance of this class, use Annotations::PmiStringBuilder Created in NX6.0.0
PmiStringBuilder	Represents a Annotations::PmiString builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiStringBuilder Created in NX6.0.0
PmiThicknessDimensionBuilder	Represents a Annotations::PmiConcentricCircleDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreatePmiThicknessDimensionBuilder Created in NX9.0.0
PmiUrlNote	Represents a Pmi url Note To create or edit an instance of this class, use Annotations::PmiUrlNoteBuilder Created in NX6.0.0
PmiUrlNoteBuilder	Represents a Annotations::PmiUrlNote builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiUrlNoteBuilder Created in NX6.0.0
PmiUserDefined	Represents a User Defined Attribute To create or edit an instance of this class, use Annotations::PmiUserDefinedBuilder Created in NX6.0.0
PmiUserDefinedBuilder	Represents a Annotations::PmiUserDefined builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreatePmiUserDefinedBuilder Created in NX6.0.0
PmiVerticalDimension	Represents a PMI vertical dimension To create or edit an instance of this class, use Annotations::PmiLinearDimensionBuilder Created in NX4.0.0
PmiVerticalOrdinateDimension	Represents a PMI vertical ordinate dimension To create or edit an instance of this class, use Annotations::PmiOrdinateDimensionBuilder Created in NX4.0.0
PmiWave	Represents a Wave To create or edit an instance of this class, use Annotations::PmiWaveLinkBuilder Created in NX8.0.0
PmiWaveCollection	Represents a collection of Annotations::PmiWave objects To obtain an instance of this class, refer to Annotations::PmiManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
PmiWaveLinkBuilder	Represents a Annotations::Pmi builder To create a new instance of this class, use Annotations::PmiWaveCollection::CreatePmiWaveLinkBuilder Created in NX8.0.0
PointTarget	Represents point datum target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
ProcessSpecification	Represents a Process Specification To create or edit an instance of this class, use Annotations::ProcessSpecificationBuilder Created in NX6.0.0
ProcessSpecificationBuilder	Represents a Annotations::ProcessSpecification builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateProcessSpecificationBuilder Created in NX6.0.0
QueryPmiBuilder	Represents a @link Annotations::QueryPmiBuilder Annotations::QueryPmiBuilder@endlink <br> To create a new instance of this class, use @link Annotations::AnnotationManager::CreateQueryPmiBuilder Annotations::AnnotationManager::CreateQueryPmiBuilder @endlink <br> Default values
RadialDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateRadialDimensionBuilder Created in NX9.0.0
RadialStyleBuilder	Represents a Annotations::RadialStyleBuilder
RadiusDimension	Represents a radius dimension To create or edit an instance of this class, use Annotations::RadialDimensionBuilder Created in NX4.0.0
RapidDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateRapidDimensionBuilder Created in NX9.0.0
RectangularTarget	Represents a rectangular datum target To create or edit an instance of this class, use Annotations::PmiDatumTargetBuilder Created in NX4.0.0
RectangularTargetData	Represents rectangular datum target data Created in NX4.0.0
Region	Represents a Region To create or edit an instance of this class, use Annotations::RegionBuilder Created in NX6.0.0
RegionBuilder	Represents a @link Annotations::RegionBuilder Annotations::RegionBuilder@endlink builder <br> To create a new instance of this class, use @link Annotations::PmiRegionCollection::CreateRegionBuilder Annotations::PmiRegionCollection::CreateRegionBuilder @endlink <br> Default values
ReplaceSymbolBuilder	Represents a Builder for Replace Custom Symbol functionality <br> To create a new instance of this class, use @link Annotations::CustomSymbolCollection::CreateReplaceSymbolBuilder Annotations::CustomSymbolCollection::CreateReplaceSymbolBuilder @endlink <br> Default values
RetainedAnnotationsBuilder	Represents a Annotations::RetainedAnnotationsBuilder
RevisionBusinessModifier	Represents business modifier that applies a revision (in the string format such as -A1) to a PMI
RevisionBusinessModifierBuilder	Represents a Annotations::RevisionBusinessModifier builder To create a new instance of this class, use Annotations::BusinessModifierCollection::CreateRevisionBusinessModifierBuilder Created in NX6.0.0
SafetyClassBusinessModifier	Represents buiness modifier that applies safety classification such as Critical, Major to a PMI
SafetyClassBusinessModifierBuilder	Represents a Annotations::SafetyClassBusinessModifier builder To create a new instance of this class, use Annotations::BusinessModifierCollection::CreateSafetyClassBusinessModifierBuilder Created in NX6.0.0
SearchCriteriaCalloutBuilder	Represents SearchCriteriaCalloutBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
SearchCriteriaDatumFeatureSymbolBuilder	Represents SearchCriteriaDatumFeatureSymbolBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaDatumFeatureSymbolBuilder Created in NX7.5.0
SearchCriteriaDatumTargetBuilder	Represents SearchCriteriaDatumTargetBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaDatumTargetBuilder Created in NX7.5.0
SearchCriteriaDimensionBuilder	Represents SearchCriteriaDimensionBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaDimensionBuilder Created in NX7.5.0
SearchCriteriaFeatureControlFrameBuilder	Represents SearchCriteriaFeatureControlFrameBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaFeatureControlFrameBuilder Created in NX7.5.0
SearchCriteriaPMINotesBuilder	Represents SearchCriteriaPMINotesBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaPminotesBuilder Created in NX7.5.0
SearchCriteriaSurfaceFinishBuilder	Represents SearchCriteriaSurfaceFinishBuilder To create a new instance of this class, use Annotations::SearchModelViewCollection::CreateSearchCriteriaSurfaceFinishBuilder Created in NX7.5.0
SearchModelView	Represents a search model view To create or edit an instance of this class, use Annotations::SearchModelViewBuilder Created in NX7.5.0
SearchModelViewBuilder	Represents a @link Annotations::SearchModelViewBuilder Annotations::SearchModelViewBuilder@endlink <br> To create a new instance of this class, use @link Annotations::SearchModelViewCollection::CreateSearchModelViewBuilder Annotations::SearchModelViewCollection::CreateSearchModelViewBuilder @endlink <br> Default values
SearchModelViewCollection	Represents a collection of Annotations::SearchModelView objects
iterator	Iterator for accessing the contents of the collection
SelectAnnotation	Represents a single object selection
SelectAnnotationList	Represents a list of objects on a selection list
SelectBaseCustomSymbolList	Represents a list of objects on a selection list
SelectDimension	Represents a single object selection
SelectOrdinateDimensionList	Represents a list of objects on a selection list
SelectTableSectionList	Represents a list of objects on a selection list
ShipDimensionBuilder	Represents a Annotations::Dimension builder To create a new instance of this class, use Annotations::ShipDimensionCollection::CreateShipDimensionBuilder Created in NX9.0.0
ShipDimensionCollection	Represents a collection of Annotations::Dimension objects To obtain an instance of this class, refer to Part Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
ShipDraftingFramebarGeneralBuilder	Represents a @link Annotations::ShipDraftingFramebarGeneralBuilder Annotations::ShipDraftingFramebarGeneralBuilder@endlink <br> This is a sub-builder class and cannot be directly instantiated <br> Created in NX9.0.0
SimpleDraftingAid	Represents a simple drafting aid
SimpleDraftingAidPreferences	Represents simple drafting aid preferences Created in NX4.0.0
SmashCustomSymbolBuilder	Represents a Annotations::SmashCustomSymbolBuilder
SpecificNote	Represents a Specific Note To create or edit an instance of this class, use Annotations::SpecificNoteBuilder Created in NX6.0.0
SpecificNoteBuilder	Represents a Annotations::SpecificNote builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateSpecificNoteBuilder Created in NX6.0.0
StyleBuilder	Represents a Annotations::StyleBuilder
SurfaceFinish	Represents a PMI Surface Finish To create or edit an instance of this class, use Annotations::SurfaceFinishBuilder Created in NX6.0.0
SurfaceFinishBuilder	Represents a Annotations::SurfaceFinish builder To create a new instance of this class, use Annotations::PmiAttributeCollection::CreateSurfaceFinishBuilder Created in NX6.0.0
SymbolCatalogBuilder	Represents a builder to instantiate a symbol from a parameterized family of standard symbols defined in catalogs, eg
SymbolCatalogParameterBuilder	This builder allows you to define one parameter for a symbol To create a new instance of this class, use Annotations::SymbolCatalogBuilder::NewParameter Created in NX8.0.0
SymbolCatalogParameterBuilderList	Represents a list of objects
SymbolFile	Represents a symbolFile To create or edit an instance of this class, use Annotations::SymbolFileBuilder Created in NX8.0.0
SymbolFileBuilder	Represents builder for drafting Symbol file builder To create a new instance of this class, use Annotations::SymbolFileCollection::CreateSymbolFileBuilder Created in NX8.0.0
SymbolFileCollection	Represents a collection of Annotations::SymbolFile objects Use Annotations::SymbolFile to get the instance of this class
iterator	Iterator for accessing the contents of the collection
SymbolPreferences	Represents symbol preferences Created in NX3.0.0
SymbolStyleBuilder	Represents a Annotations::SymbolStyleBuilder
SymbolWorkflowBuilder	Represents a Annotations::SymbolWorkflowBuilder
SymmetricalCenterline	Represents a Symmetrical Centerline To create or edit an instance of this class, use Annotations::SymmetricalCenterlineBuilder Created in NX6.0.0
SymmetricalCenterlineBuilder	Builder for creating Symmetrical Centerline
SymmetricalCenterlineSettingsBuilder	Represents a Builder for Symmetrical Centerline Settings Created in NX6.0.0
Table	Represents a Annotations::Table
TableCellStyleBuilder	Represents a Annotations::TableCellStyleBuilder
TableCollection	Represents a collection of Annotations::Table objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TableColumnBuilder	Represents a Annotations::TableColumnBuilder
TableEditSettingsBuilder	Represents a Annotations::TableEditSettingsBuilder
TableSection	Represents a Annotations::TableSection
TableSectionBuilder	Represents a @link Annotations::TableSection Annotations::TableSection@endlink builder <br> To create a new instance of this class, use @link Annotations::TableSectionCollection::CreateTableSectionBuilder Annotations::TableSectionCollection::CreateTableSectionBuilder @endlink <br> Default values
TableSectionCollection	Represents a collection of Annotations::TableSection objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TableSectionStyleBuilder	Represents a Annotations::TableSectionStyleBuilder
TableStyleBuilder	Represents a Annotations::TableStyleBuilder
TabularNoteStyleBuilder	Represents a Annotations::TabularNoteStyleBuilder
TargetPoint	Represents a target point To create or edit an instance of this class, use Annotations::TargetPointBuilder Created in NX6.0.0
TargetPointBuilder	Represents a @link Annotations::TargetPoint Annotations::TargetPoint@endlink builder <br> To create a new instance of this class, use @link Annotations::TargetPointCollection::CreateTargetPointBuilder Annotations::TargetPointCollection::CreateTargetPointBuilder @endlink <br> Default values
TargetPointCollection	Represents a collection of Annotations::TargetPoint objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
TextCfw	Specifies color, font, and width for text
TextComponent	Represents a single text in an annotation and can be queried for information about that text
TextWithEditControlsBuilder	Represents a Annotations::TextWithEditControlsBuilder which collects internationalized text strings from the user for processing on an annotation object
TextWithSymbolsBuilder	Represents a Annotations::TextWithSymbolsBuilder which collects internationalized text strings from the user for processing on an annotation object
ThicknessDimensionBuilder	Represents a Annotations::ConcentricCircleDimension builder To create a new instance of this class, use Annotations::DimensionCollection::CreateThicknessDimensionBuilder Created in NX9.0.0
TitleBlock	Represents a Annotations::TitleBlock To create or edit an instance of this class, use Annotations::DefineTitleBlockBuilder Created in NX8.0.0
TitleBlockCellBuilder	Represents a Annotations::TitleBlockCellBuilder To create a new instance of this class, use Annotations::TitleBlockCollection::CreateCellBuilder Created in NX8.0.0
TitleBlockCellBuilderList	Represents a list of objects
TitleBlockCollection	Represents a collection of Annotations::TitleBlock
iterator	Iterator for accessing the contents of the collection
TitleBlockPreferences	Represents title_block preferences
UnitsFormatPreferences	Represents units and format preferences Created in NX4.0.0
UnitsStyleBuilder	Represents a Annotations::UnitsStyleBuilder
UrlBusinessModifier	Represents business modifier that applies an URL to a PMI
UrlBusinessModifierBuilder	Represents a Annotations::UrlBusinessModifier builder To create a new instance of this class, use Annotations::BusinessModifierCollection::CreateUrlBusinessModifierBuilder Created in NX6.0.0
UserSymbolPreferences	Represents preferences related to user-defined symbols Created in NX3.0.0
Value	Specifies the value data
VerticalDimension	Represents a vertical dimension To create or edit an instance of this class, use Annotations::LinearDimensionBuilder Created in NX4.0.0
VerticalOrdinateDimension	Represents a vertical ordinate dimension To create or edit an instance of this class, use Annotations::OrdinateDimensionBuilder Created in NX4.0.0
VerticalOrdinateMargin	Represents a vertical ordinate margin Created in NX4.0.0
Weld	Represents a weld To obtain an instance of this class, use Annotations::WeldCollection Created in NX4.0.0
WeldCollection	Represents a collection of Annotations::Weld objects To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
Assemblies	Provides classes and interfaces for Assemblies
ProductInterface	Provides classes and interfaces for Assembly Product Interfaces
Collection	This class represents the collection of product interface objects To obtain an instance of this class, refer to Part Created in NX5.0.0
InterfaceObject	Represents a Product Interface Object Builder
ObjectBuilder	Represents a Product Interface Object Builder
PropertyBuilder	Represents a Assemblies::ProductInterface::PropertyBuilder builder To create a new instance of this class, use Assemblies::ProductInterface::Collection::CreatePropertyBuilder Created in NX9.0.0
Arrangement	Manages the suppression of Component s within a ComponentAssembly
ArrangementCollection	Collection of arrangements To obtain an instance of this class, refer to Assemblies::ComponentAssembly Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
ArrangementsBuilder	Represents an arrangements builder that selects an arrangement
AssembliesGeneralPropertiesBuilder	Represents an Assemblies::AssembliesGeneralPropertiesBuilder to be used for changing the general properties of a component
AssembliesParameterPropertiesBuilder	Represents an Assemblies::AssembliesParameterPropertiesBuilder to be used for changing the name or modifying the positioning mixture status of a component
Assembly	Assembly class This is an abstract class, and cannot be instantiated
AssemblyManager	Represents the Assembly Manager <br> To obtain an instance of this class, refer to @link BasePart BasePart @endlink <br> Created in NX6.0.0
AttributeSearchTerm	An attribute search term within a Assemblies::SubsetRecipe
AttributeSearchTermBuilder	An AttributeSearchTermBuilder is used to create or edit an Assemblies::AttributeSearchTerm
BoxSearchTerm	A volume search term within a Assemblies::SubsetRecipe
BoxSearchTermBuilder	A BoxSearchTermBuilder is used to create or edit an Assemblies::BoxSearchTerm
ClearanceAnalysisBuilder	Represents ClearanceAnalysisBuilder
ClearanceSet	Represents ClearanceSet
Summary	Summary of the most recent Clearance Analysis results
ClearanceSetCollection	Represents ClearanceSetCollection
iterator	Iterator for accessing the contents of the collection
Component	Represents a component in a Assemblies::ComponentAssembly
ComponentAssembly	Represents the set of Assemblies::Component s that make up an assembly
ComponentGroup	Represents a Component Group that is defined within an Assembly
ComponentGroupCollection	Contains a collection of Component Groups a ComponentGroup that are defined within an Assembly part
iterator	Iterator for accessing the contents of the collection
ComponentOrder	Represents an order object that stores the order of child Assemblies::Component s in context of parent Assemblies::ComponentAssembly
ComponentPattern	Represents the object for component pattern
ComponentPatternBuilder	Represents a builder class Assemblies::ComponentPatternBuilder that performs various component pattern operations
ComponentPatternCollection	Represents the collection object for all component patterns
iterator	Iterator for accessing the contents of the collection
ConstraintDisplayBuilder	The Assemblies::ConstraintDisplayBuilder can be used to control visibility of constraints and optionally components
CreateNewComponentBuilder	Represents a @link Assemblies::CreateNewComponentBuilder Assemblies::CreateNewComponentBuilder@endlink builder class <br> To create a new instance of this class, use @link Assemblies::AssemblyManager::CreateNewComponentBuilder Assemblies::AssemblyManager::CreateNewComponentBuilder @endlink <br> Default values
DegreesOfFreedom	Structure used to report the Degrees of Freedom of a component
DesignElementBuilder	Represents a builder class that performs various design element operations
ExplicitSearchTerm	A Assemblies::SubsetRecipe search term that refers explicitly to a design element
Explosion	Represents an explosion
ExplosionCollection	Represents a collection of explosions To obtain an instance of this class, refer to Assemblies::ComponentAssembly Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
FindInCollaborativeDesign	FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset
GroupSearchTerm	A group of Assemblies::SearchTerm s within a Assemblies::SubsetRecipe
HideComponentBuilder	Represents a Assemblies::HideComponentBuilder To create a new instance of this class, use Assemblies::AssemblyManager::CreateHideComponentBuilder Created in NX6.0.0
LoadInterpartDataBuilder	Represents a builder@link Assemblies::LoadInterpartDataBuilder Assemblies::LoadInterpartDataBuilder@endlink <br> To create a new instance of this class, use @link Assemblies::AssemblyManager::CreateLoadInterpartDataBuilder Assemblies::AssemblyManager::CreateLoadInterpartDataBuilder @endlink <br> Default values
MakeUniquePartBuilder	Represents a @link Assemblies::MakeUniquePartBuilder Assemblies::MakeUniquePartBuilder@endlink builder <br> To create a new instance of this class, use @link Assemblies::AssemblyManager::CreateMakeUniquePartBuilder Assemblies::AssemblyManager::CreateMakeUniquePartBuilder @endlink <br> Default values
Order	Represents base class for all Order classes
OrderCollection	Collection of Assemblies::Order s To obtain an instance of this class, refer to Assemblies::ComponentAssembly Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
Partition	A partition is a Teamcenter object in a Collaborative Design
PartitionList	Represents a list of objects
PartitionScheme	A partition scheme is a Teamcenter object in a Collaborative Design
PartitionSearchTerm	A Assemblies::SubsetRecipe search term that refers to a partition
PatternInstance	Represents the pattern instance object
PatternMaster	Represents the pattern master object
PatternMember	Represents the pattern member object
PlaneSearchTerm	A plane search term within a Assemblies::SubsetRecipe
PlaneSearchTermBuilder	A PlaneSearchTermBuilder is used to create or edit an Assemblies::PlaneSearchTerm
ProductOutlineBuilder	Represents a builder Assemblies::ProductOutlineBuilder
ProductOutlineManager	Represents a collection of assemblies <br> To obtain an instance of this class, refer to @link BasePart BasePart @endlink <br> Created in NX6.0.0
ProximitySearchTerm	A proximity search term within a Assemblies::SubsetRecipe
ProximitySearchTermBuilder	A ProximitySearchTermBuilder is used to create or edit an Assemblies::BoxSearchTerm
RelinkerBuilder	Represents a Assemblies::RelinkerBuilder To create a new instance of this class, use Assemblies::RelinkerCollection::CreateBuilder Created in NX5.0.0
RelinkerCollection	Represents a collection of relinker To obtain an instance of this class, refer to Part Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
ReplaceComponentBuilder	Represents a @link Assemblies::ReplaceComponentBuilder Assemblies::ReplaceComponentBuilder@endlink builder <br> To create a new instance of this class, use @link Assemblies::AssemblyManager::CreateReplaceComponentBuilder Assemblies::AssemblyManager::CreateReplaceComponentBuilder @endlink <br> Default values
SearchResultCollection	A collection of SearchResultElement s
iterator	Iterator for accessing the contents of the collection
SearchResultElement	A search result element can be produced as the result of a search performed in the context of a Assemblies::SubsetBuilder
SearchTerm	A search term is used to specify a search for the contents of a Assemblies::Subset
SearchTermBuilder	A SearchTermBuilder is used to create or edit an Assemblies::SearchTerm
SelectComponent	Represents a single object selection
SelectComponentList	Represents a list of objects on a selection list
ShowComponentBuilder	Represents a Assemblies::ShowComponentBuilder To create a new instance of this class, use Assemblies::AssemblyManager::CreateShowComponentBuilder Created in NX6.0.0
Subset	A subset is a set of design elements within a collaborative design
SubsetBuilder	A SubsetBuilder is used to create or edit an Assemblies::Subset
SubsetCollection	Represents a collection of Component Patterns To obtain an instance of this class, refer to Assemblies::ComponentAssembly Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
SubsetConfigurationBuilder	A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used to configure the contents of the subset
SubsetRecipe	A subset recipe is used by a Assemblies::SubsetBuilder to collect SearchTerm s
iterator	Iterator for accessing the contents of the collection
UpdateStructureBuilder	Represents a builder Assemblies::UpdateStructureBuilder
WaveQuery	Provides information about the inter-part relations (e.g
BlockStyler	Provides classes and interfaces for the Block Styler
AngularDimension	Represents a Angular Dimension block Created in NX8.5.0
BlockDialog	Represents a Dialog Created in NX6.0.0
BodyCollector	Represents a Body Collector block Created in NX8.5.0
Button	Represents a button Created in NX8.5.0
ChooseExpression	Represents Choose Expression block Created in NX8.5.0
CompositeBlock	A composite block is a block that contains other blocks Created in NX6.0.0
CurveCollector	Represents a Curve Collector Created in NX8.5.0
DoubleBlock	Represents a Double block Created in NX8.5.0
DoubleTable	Represents a Double Table block Created in NX8.5.0
DrawingArea	Represents a Drawing Area block Created in NX8.5.0
Enumeration	Represents an Enumeration block Created in NX8.5.0
Explorer	Represents an Explorer block
ExpressionBlock	Represents an Expression block Created in NX8.5.0
FaceCollector	Represents a Face Collector Created in NX8.5.0
FileSelection	Represents File Selection With Browse block Created in NX8.5.0
FolderSelection	Represents Folder Selection With Browse block Created in NX8.5.0
Group	Represents a Group Block Created in NX8.5.0
IntegerBlock	Represents a Integer block Created in NX8.5.0
IntegerTable	Represents a Integer Table block Created in NX8.5.0
Label	Represents a Label Created in NX8.5.0
LinearDimension	Represents a Linear Dimension block Created in NX8.5.0
LineColorFontWidth	Represents a Line Width block Created in NX9.0.0
LineFont	Represents a Line Width block Created in NX9.0.0
LineWidth	Represents a Line Width block Created in NX8.5.0
ListBox	Represents a ListBox block Created in NX6.0.0
Microposition	Represents a Microposition block Created in NX8.5.0
MultilineString	Represents a Multiline String block Created in NX6.0.0
Node	Represents the node created and utilized by BlockStyler::Tree
ObjectColorPicker	Represents an Object Color Picker Block Created in NX8.5.0
OnPathDimension	Represents a On Path Dimension block Created in NX8.5.0
OrientXpress	Represents OrientXpress Block Created in NX8.5.0
PropertyList	Represents a list of properties Created in NX6.0.0
RadiusDimension	Represents a Radius Dimension block Created in NX8.5.0
ReverseDirection	Represents Reverse Direction block Created in NX8.5.0
RGBColorPicker	Represents a RGB Color Picker block Created in NX8.5.0
ScrolledWindow	Represents a Scrolled Window block Created in NX8.5.0
SectionBuilder	Represents a Section Builder Created in NX8.5.0
SelectElement	Represents a Select Elements block Created in NX8.5.0
SelectFeature	Represents a Select Feature block Created in NX8.5.0
SelectNode	Represents a Select Node block Created in NX8.5.0
SelectObject	Represents a Select Object block Created in NX8.5.0
SelectPartFromList	Represents a Select Part From List block Created in NX8.5.0
Separator	Represents a Separator block Created in NX8.5.0
SetList	Represents a SetList block Created in NX6.0.0
SpecifyAxis	Represents a Specify Axis block Created in NX8.5.0
SpecifyCSYS	Represents a Specify CSYS block Created in NX8.5.0
SpecifyLocation	Represents a Specify Location block Created in NX8.5.0
SpecifyOrientation	Represents Specify Orientation block Created in NX8.5.0
SpecifyPlane	Represents a Specify Plane block Created in NX8.5.0
SpecifyPoint	Represents a Specify Point block Created in NX8.5.0
SpecifyVector	Represents Specify Vector block Created in NX8.5.0
StringBlock	Represents a String block Created in NX8.5.0
SuperPoint	Represents a Super Point block Created in NX8.5.0
SuperSection	Represents a Super Section block Created in NX8.5.0
TabControl	Represents a Tab Control layout Created in NX8.5.0
Table	Represents a Table layout Created in NX8.5.0
TextColorFontWidth	Represents a Line Width block Created in NX9.0.0
Toggle	Represents a Toggle block Created in NX8.5.0
Tree	Represents the Tree block in block styler automation
TreeListMenu	Represents a menu class utilized by BlockStyler::Tree
UIBlock	Represents a UI Block Created in NX6.0.0
Wizard	Represents a Wizard block Created in NX7.5.0
BodyDes	Provides classes and interfaces for Body Design
OnestepUnform	Represents a onestep unform feature To create or edit an instance of this class, use BodyDes::OnestepUnformBuilder Created in NX5.0.0
OnestepUnformBuilder	Represents a BodyDes::OnestepUnformBuilder
OnestepUnformCollection	Represents a collection of OnestepUnform To obtain an instance of this class, refer to Part Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
CAE	Provides classes and interfaces relating to Advanced Simulation and Design Simulation
FTK	Provides classes and interfaces to Function Toolkit
ArrayRecord2D	Manages the 2d array record Not support KF
ArrayRecord2DEven	Manages the 2d array record with even abscissa data Not support KF
ArrayRecord3D	Manages the 3d array record Not support KF
BaseRecord	Manages the base record Not support KF
BaseUnit	Manages the base unit Not support KF
DataManager	Ftk data manager To obtain an instance of this class use Session::DataManager
FTKManager	FTK function data manager To obtain an instance of this class use Session::FTKManager
OptionSetting	Manager the options data for AFU Data Record Not support KF
ModelCheck	Provides classes and interfaces relating to Model Check
AlignShellElementNormalBuilder	Represents a CAE::ModelCheck::AlignShellElementNormalBuilder builder used to align the normals of connected shell elements with a seed shell element
DuplicateElementsCheckBuilder	Represents a CAE::ModelCheck::DuplicateElementsCheckBuilder to check for duplicate elements within the candidate elements
DisplaySettings	Represents the display settings of duplicated elements detected
DuplicateNodesCheckBuilder	Represents a CAE::ModelCheck::DuplicateNodesCheckBuilder to check for duplicate nodes within the candidate nodes
DisplaySettings	Represents the display settings data
ElementEdgeCheckBuilder	Represents a CAE::ModelCheck::ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges
EdgeDisplayStyle	Display style of the edges detected
ElementMaterialOrientationCheckBuilder	Represents a CAE::ModelCheck::ElementMaterialOrientationCheckBuilder used to check the material orientation for shell and solid elements
ElementQualityCheckBuilder	Represents a CAE::ModelCheck::ElementQualityCheckBuilder to perform quality checking on the candidate elements
ElementQualityCheckResults	Represents the element quality checking result of CAE::ModelCheck::ElementQualityCheckBuilder To obtain an instance of this class use CAE.ModelCheck.ElementQualityCheckBuilder Created in NX8.5.0
TestSummary	Reprents the summary data of a specified quality checking test type
ElementQualitySetting	Represents element quality check settings of a specified solver language
ElementQualitySettingCollection	Represents a collection of CAE::ModelCheck::ElementQualitySetting in a cae part
iterator	Iterator for accessing the contents of the collection
ElementSpecificTestValue	Represents the quality setting for a specfied element reference
ElementTestResult	Represents quality checking result for an element
FaceClearanceCheckBuilder	Represents a CAE::ModelCheck::FaceClearanceCheckBuilder to perform polygon face interference or clearance check
ITestValue	Represents the quality check criteria value settings
ModelSetupCheckBuilder	Represents a CAE::ModelCheck::ModelSetupCheckBuilder which can be used to check if the active CAE::SimSolution contains all the necessary items for the analysis, including elements, loads, constraints and materials
QualityTestValue	Represents quality test settings of a specified test type
ReverseShellElementNormalBuilder	Represents a CAE::ModelCheck::ReverseShellElementNormalBuilder used to reverse normals for specified shell elements
TestResult	Represents quality checking result of a quality test To obtain an instance of this class use CAE.ModelCheck.ElementTestResult.GetTestResults Created in NX8.5.0
TestValueTypes	Represents the quality check criteria value settings
ElementReference	Element reference definition associated with this test
Optimization	Provides classes and interfaces relating to Optimization
DAOConstraint	Represents a CAE::Optimization::DAOConstraint
DAOConstraintBuilder	Represents a CAE::Optimization::DAOConstraintBuilder
DAOConstraintCollection	Represents the collection of optimization solution design constraint To obtain an instance of this class, refer to CAE::Optimization::DAOSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
DAODesignVariable	Represents a CAE::Optimization::DAODesignVariable
DAODesignVariableBuilder	Represents a CAE::Optimization::DAODesignVariableBuilder
DAODesignVariableCollection	Represents the collection of optimization solution design variable To obtain an instance of this class, refer to CAE::Optimization::DAOSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
DAOObjective	Represents a CAE::Optimization::DAOObjective
DAOOptimizationManager	Represents the Design and Analysis optimization manager that contains all optimization objects
DAOSolution	Represents a CAE::Optimization::DAOSolution
DAOSolutionBuilder	Represents a CAE::Optimization::DAOSolutionBuilder
DAOSolutionCollection	Represents the collection of optimization solution To obtain an instance of this class, refer to CAE::Optimization::DAOOptimizationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
DAOStopCondition	Represents a CAE::Optimization::DAOStopCondition
NameDescription	Created in NX8.0.0
TBSBaseDesignVariableBuilder	Represents the builder of CAE::Optimization::TBSDesignVariable This is an abstract class, and cannot be created
TBSCastCondition	Represents the manufacturing restrictions of CAE::Optimization::TBSTopologyRestrictArea Created in NX8.0.0
TBSCheckDOF	Represents the restriction of dispacement in the coordinate direction of the referenced coordinate system Created in NX8.5.0
DofSettings	Displacement restriction settings on three axial directions of referenced coordinate system
TBSConstraint	Represents the design constraint, which is defined with CAE::Optimization::TBSDesignVariable To create or edit an instance of this class, use CAE::Optimization::TBSConstraintBuilder Created in NX8.0.0
TBSConstraintBuilder	Represents the builder of CAE::Optimization::TBSConstraint To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateResponseConstraintBuilder Created in NX8.0.0
TBSConstraintCollection	Represents a collection of CAE::Optimization::TBSConstraint To obtain an instance of this class, refer to CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TBSDesignArea	Represents the design area Created in NX8.0.0
TBSDesignResponse	Represents the design response referenced by CAE::Optimization::TBSConstraint and CAE::Optimization::TBSObjectives To create or edit an instance of this class, use CAE::Optimization::TBSDesignResponseBuilder Created in NX8.0.0
TBSDesignResponseBuilder	Represents the builder of CAE::Optimization::TBSDesignResponse To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateDesignResponseBuilder Created in NX8.0.0
TBSDesignVariable	Represents the design variable referenced by CAE::Optimization::TBSConstraint and CAE::Optimization::TBSObjectives To create or edit an instance of this class, use CAE::Optimization::TBSDesignVariableBuilder Created in NX8.0.0
TBSDesignVariableBuilder	Represents the builder of CAE::Optimization::TBSDesignVariable To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateDesignVariableBuilder Created in NX8.0.0
TBSDesignVariableCollection	Represents a collection of CAE::Optimization::TBSDesignVariable To obtain an instance of this class, refer to CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TBSEigenvalueOptimizationParameters	Represents the parameters to control an eigenvalue optimization Created in NX8.0.0
TBSGroupDefinition	Represents a group of nodes or elements Created in NX8.0.0
TBSIOptimizationTest	Represents an interface to perform optimization test Created in NX8.5.0
TBSLoadCase	Represents the load case To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateLoadCase Created in NX8.0.0
TBSLoadCaseManager	Managers load cases Created in NX8.0.0
TBSMeshSmooth	Represents the mesh smooth Created in NX8.5.0
TBSObjectives	Represents the objective functions of an optimization Created in NX8.0.0
TBSOptimizationManager	Represents the optimization manager to contain the optimization solutions and take charge of creating optimization objects To obtain an instance of this class, refer to CAE::SimSimulation Created in NX8.0.0
TBSOptimizationParameters	Represents the parameters to control an optimization This is an abstract class, and cannot be created
TBSOptimizationSolution	Represents the solution to contain optimization setting This is an abstract class, and cannot be created
TBSOptimizationSolutionBuilder	Represents the abstract builder of CAE::Optimization::TBSOptimizationSolution
TBSOptimizationSolutionCollection	Represents a collection of CAE::Optimization::TBSOptimizationSolution To obtain an instance of this class, refer to CAE::Optimization::TBSOptimizationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TBSOutputControlOptions	Represents the output result control options of the optimization Created in NX8.0.0
TBSRestrictArea	Represents the restrictions for the design variable in an optimization To create or edit an instance of this class, use CAE::Optimization::TBSRestrictAreaBuilder Created in NX8.0.0
TBSRestrictAreaBuilder	Represents the builder of CAE::Optimization::TBSRestrictArea This is an abstract class, and cannot be created
TBSRestrictAreaCollection	Represents a collection of CAE::Optimization::TBSRestrictArea To obtain an instance of this class, refer to CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TBSShapeLinkCondition	Represents the definition of link condition for shape restriction Created in NX8.5.0
TBSShapeOptimizationParameters	Represents the control parameters of shape optimization Created in NX8.5.0
TBSShapeOptimizationSolution	Represents a shape optimization solution To create or edit an instance of this class, use CAE::Optimization::TBSShapeOptimizationSolutionBuilder Created in NX8.5.0
TBSShapeOptimizationSolutionBuilder	Represents the builder of CAE::Optimization::TBSShapeOptimizationSolution
TBSShapeRestrictArea	Represents the restrictions of the design variable in Shape optimization To create or edit an instance of this class, use CAE::Optimization::TBSShapeRestrictAreaBuilder Created in NX8.5.0
TBSShapeRestrictAreaBuilder	Represents the builder of CAE::Optimization::TBSShapeRestrictArea To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateShapeRestrictAreaBuilder Created in NX8.5.0
TBSSingleObjective	Represents a single objective To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateSingleObjective Created in NX8.0.0
TBSSmooth	Represents the parameters that control the generation of surfaces by optimization To create or edit an instance of this class, use CAE::Optimization::TBSSmoothBuilder Created in NX8.0.0
TBSSmoothBuilder	Represents the builder of CAE::Optimization::TBSSmooth
TBSSmoothCollection	Represents a collection of CAE::Optimization::TBSSmooth To obtain an instance of this class, refer to CAE::Optimization::TBSOptimizationSolution Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
TBSStopCondition	Represents the condtion to end an optimization Created in NX8.0.0
TBSTestFunction	Represents a test displacement for shape optimization or bead optimization Created in NX8.5.0
TBSTopologyControllerOptimizationParameters	Represents the parameters to control an optimization in controller strategy Created in NX8.0.0
TBSTopologyLinkCondition	Represents the definition of symmetry and link conditions for topology optimization Created in NX8.0.0
TBSTopologyOptimizationSolution	Represents the topology optimization solution To create or edit an instance of this class, use CAE::Optimization::TBSTopologyOptimizationSolutionBuilder Created in NX8.0.0
TBSTopologyOptimizationSolutionBuilder	Represents the builder of CAE::Optimization::TBSTopologyOptimizationSolution
TBSTopologyRestrictArea	Represents the restrictions of the design variable in topology optimization To create or edit an instance of this class, use CAE::Optimization::TBSTopologyRestrictAreaBuilder Created in NX8.0.0
TBSTopologyRestrictAreaBuilder	Represents the builder of CAE::Optimization::TBSTopologyRestrictArea To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateTopologyRestrictAreaBuilder Created in NX8.0.0
TBSTopologySensitivityOptimizationParameters	Represents the parameters to control an optimization in sensitivity strategy Created in NX8.0.0
ResponseSimulation	Provides classes and interfaces for Response Simulation
BaseBuilder	Represents the abstract builder class for all objects defined in response analysis meta solution This is an abstract class, and cannot be created
CombinationEvaluationOptions	Represents the setting for combination evaluation
CsdEvaluationSetting	Represents the class of evaluation setting for CSD To create or edit an instance of this class, use CAE::ResponseSimulation::CsdEvaluationSettingBuilder Created in NX6.0.0
CsdEvaluationSettingBuilder	Represents the CSD build To create a new instance of this class, use CAE::ResponseSimulation::EvaluationSettingManager::CreateCsdEvaluationSettingBuilder Created in NX6.0.0
CSDExcitation	Represents an CSD excitation
CSDExcitationBuilder	Represents the manager to CAE::ResponseSimulation::CSDExcitation
DataLocation	Represents the data location to perform evaluation Created in NX5.0.0
DDAMComponentData	Represents an excitation on one specified direction
DDAMExcitation	Represents an DDAM excitation
DDAMExcitationBuilder	Represents the manager to CAE::ResponseSimulation::DDAMExcitation
DistributedLoadExcitation	Represents an excitation of distributed-load type To create or edit an instance of this class, use CAE::ResponseSimulation::DistributedLoadExcitationBuilder Created in NX5.0.0
DistributedLoadExcitationBuilder	Represents the manager to CAE::ResponseSimulation::DistributedLoadExcitation
DynamicEvaluationOutputSettings	Represents the output setting for dynamic response evaluation Created in NX5.0.0
DynamicResultEvaluationSetting	Represents the abstract class of evaluation setting for all dynamic results evaluations
DynamicResultEvaluationSettingBuilder	Represents the abstract builder class of evaluation setting for all dynamic results evaluations
ElementalFunctionEvaluationSetting	Represents the parameters setting for elemental function evaluation
ElementalFunctionEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::ElementalFunctionEvaluationSetting class
EvaluationParameters	Represents the evaluation parameters for a response simulation meta solution Not support KF
EvaluationSetting	Represents the abstract class of all evaluation setting classes
EvaluationSettingBuilder	Represents the abstract builder class of all evaluation setting classes
EvaluationSettingManager	Represents the manager of all evaluation setting objects
Excitation	Represents the abstract class of dynamic excitations This is an abstract class, and cannot be created
ExcitationBuilder	Represents the abstract excitation builder class
ExcitationCollection	Represents a collection of excitation objects To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
ExcitationLocationDefinition	Represents the manager to CAE::ResponseSimulation::DistributedLoadExcitation
FrequencyDefinition	Represents the frequency setting to perform FRF evaluation Created in NX5.0.0
FrfEvaluationSetting	Represents the parameters setting for FRF results evaluation To create or edit an instance of this class, use CAE::ResponseSimulation::FrfEvaluationSettingBuilder Created in NX5.0.0
FrfEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::FrfEvaluationSetting class
FunctionComponentData	Represents a function component setting of CAE::ResponseSimulation::NodalFunctionExcitation on one direction Created in NX5.0.0
FunctionEvaluationOutputSettings	Represents the output setting for function response evaluation Created in NX5.0.0
FunctionEvaluationSetting	Represents the abstract class of evaluation setting for function response evaluation This is an abstract class, and cannot be created
FunctionEvaluationSettingBuilder	Represents the abstract builder class of evaluation setting for function response evaluation This is an abstract class, and cannot be created
InitialConditions	Represents the initial condition setting of transient event Created in NX5.0.0
LcrResultsEvaluationSetting	Represents the parameters setting of LCR results evaluation
LcrResultsEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::LcrResultsEvaluationSetting class
Manager	Represents the Response Simulation manager to contain all Response Simulation objects To obtain an instance of this class, refer to CAE::SimSimulation Created in NX5.0.0
ModalProperties	Represents the modal presentation of a response analysis meta solution Created in NX5.0.0
ModalResultsEvaluationSetting	Represents the abstract class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created
ModalResultsEvaluationSettingBuilder	Represents the abstract builder class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created
ModeInitialData	Represents the initial setting for a normal mode Created in NX5.0.0
NodalFunctionEvaluationSetting	Represents the parameters setting of nodal function response evaluation
NodalFunctionEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::NodalFunctionEvaluationSetting class
NodalFunctionExcitation	Represents the abstract class of nodal function excitation This is an abstract class, and cannot be created
NodalFunctionExcitationBuilder	Represents the manager to CAE::ResponseSimulation::NodalFunctionExcitation
NormalMode	Represents the properties of one normal mode Created in NX5.0.0
ObjectLabel	Represents the setting to label an object
PeakValueEvaluationSetting	Represents the parameters setting of peak value evaluation
PeakValueEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::PeakValueEvaluationSetting class
PhysicalDampingSettings	Represents the physical damping settings for a response simulation meta solution Created in NX6.0.0
PrlResultsEvaluationSetting	Represents the abstract class of evaluation setting for peak value, RMS results and LCR results
PrlResultsEvaluationSettingBuilder	Represents the abstract builder class of evaluation setting for peak value, RMS results and LCR results
ResponseResultsEvaluationSetting	Represents the parameters setting for response results evaluation
ResponseResultsEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::ResponseResultsEvaluationSetting class
RmsResultsEvaluationSetting	Represents the parameters setting for RMS results evaluation in response analysis
RmsResultsEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::RmsResultsEvaluationSetting class
RotationalDDAMExcitation	Represents an DDAM excitation
RotationalDDAMExcitationBuilder	Represents the manager to CAE::ResponseSimulation::DDAMExcitation
RotationalNodalFunctionExcitation	Represents a rotational nodal function excitation To create or edit an instance of this class, use CAE::ResponseSimulation::RotationalNodalFunctionExcitationBuilder Created in NX5.0.0
RotationalNodalFunctionExcitationBuilder	Represents the manager to CAE::ResponseSimulation::RotationalNodalFunctionExcitation
RSDisplayObject	Represents a BC display attributes
RSEvent	Represents a response analysis event To create or edit an instance of this class, use CAE::ResponseSimulation::RSEventBuilder Created in NX5.0.0
RSEventAttributes	Represents all possible attributes setting for response analysis event Created in NX5.0.0
RSEventBuilder	Represents the manager of CAE.ResponseSimulation.RSEvent
RSEventCollection	Represents a collection of response analysis event To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
RSEventOutputSetting	Reprensents the output setting for an event Created in NX5.0.0
RSEventSolverParameters	Represents a response analysis event Created in NX5.0.0
Sensor	Represents a CAE::ResponseSimulation::Sensor To create or edit an instance of this class, use CAE::ResponseSimulation::SensorBuilder Created in NX5.0.0
SensorBuilder	Represents a CAE::ResponseSimulation::SensorBuilder To create a new instance of this class, use CAE::ResponseSimulation::SensorCollection::CreateSensorBuilder Created in NX5.0.0
SensorCollection	Represents a collection of response analysis sensor To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
SensorEvaluationSetting	Represents the parameters setting for sensor evaluation
SensorEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::SensorEvaluationSetting class
Solution	Represents a meta solution providing response analysis functionalities in the .sim file To create or edit an instance of this class, use CAE::ResponseSimulation::SolutionBuilder Created in NX5.0.0
SolutionAttributes	Represents attributes setting of response analysis meta solution Created in NX6.0.0
SolutionBuilder	This is a manager to the CAE::ResponseSimulation::Solution class
SolutionCollection	Represents a collection of response analysis meta solution To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
StaticLoadExcitation	Represents an excitation of static load type To create or edit an instance of this class, use CAE::ResponseSimulation::StaticLoadExcitationBuilder Created in NX6.0.0
StaticLoadExcitationBuilder	Represents the manager to CAE::ResponseSimulation::StaticLoadExcitation
StrainGage	Represents a CAE::ResponseSimulation::StrainGage To create or edit an instance of this class, use CAE::ResponseSimulation::StrainGageBuilder Created in NX6.0.0
StrainGageBuilder	Represents a StrainGageBuilder <br> To create a new instance of this class, use @link CAE::ResponseSimulation::StrainGageCollection::CreateStrainGageBuilder CAE::ResponseSimulation::StrainGageCollection::CreateStrainGageBuilder @endlink <br> Default values
StrainGageCollection	Represents a collection of response analysis strain gage To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
StrainGageEvaluationSetting	Represents the parameters setting for strain gage evaluation
StrainGageEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::StrainGageEvaluationSetting class
StrengthResultsEvaluationSetting	Represents parameters setting for strength results evaluation
StrengthResultsEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::StrengthResultsEvaluationSetting class
TranslationalDDAMExcitation	Represents an DDAM excitation
TranslationalDDAMExcitationBuilder	Represents the manager to CAE::ResponseSimulation::DDAMExcitation
TranslationalNodalFunctionExcitation	Represents a translational nodal function excitation To create or edit an instance of this class, use CAE::ResponseSimulation::TranslationalNodalFunctionExcitationBuilder Created in NX5.0.0
TranslationalNodalFunctionExcitationBuilder	Represents the manager to CAE::ResponseSimulation::TranslationalNodalFunctionExcitation
TransmissibilityEvaluationSetting	Represents parameters setting for transmissibility evaluation To create or edit an instance of this class, use CAE::ResponseSimulation::TransmissibilityEvaluationSettingBuilder Created in NX5.0.0
TransmissibilityEvaluationSettingBuilder	This is a manager to the CAE::ResponseSimulation::TransmissibilityEvaluationSetting class
VelocityImpactDirection	Represents a CAE::ResponseSimulation::VelocityImpactDirection
VelocityImpactExcitation	Represents a velocity impact excitation To create or edit an instance of this class, use CAE::ResponseSimulation::VelocityImpactExcitationBuilder Created in NX6.0.0
VelocityImpactExcitationBuilder	Represents a @link CAE::ResponseSimulation::VelocityImpactExcitationBuilder CAE::ResponseSimulation::VelocityImpactExcitationBuilder@endlink <br> To create a new instance of this class, use @link CAE::ResponseSimulation::ExcitationCollection::CreateVelocityImpactExcitationBuilder CAE::ResponseSimulation::ExcitationCollection::CreateVelocityImpactExcitationBuilder @endlink <br> Default values
VelocityImpactParameters	Represents a CAE::ResponseSimulation::VelocityImpactParameters
Xyplot	Provides classes and interfaces for XY Graphing
AxisLabelStyle	Axis label display style
AxisNumberStyle	Axis number display style
AxisStyle	Axis display style
AxisStyleSetting	Represents the axis display style
BarOption2D	Bar display option for 2D plot
BarOption3D	Bar display option for 3D plot
BarStyle2DSetting	Represents the 2d bar display style
BaseBarStyleSetting	Represents the base bar display style
BaseGridLayoutStyleSetting	Represents the base grid layout display style
BaseLineStyleSetting	Represents the base line display style
BasePlotParameters	Represents the parameters passed to create or modify a plot
BaseSymbolStyleSetting	Represents the base symbol display style
BaseTemplate	Manages the display style Not support KF
BaseTemplateManager	Manages the graph template Not support KF
CustomTextStyleSetting	Represents the text content definition in title options
GridLayout2D	Grid layout style for 2D plot
GridLayout3D	Grid layout style for 3D plot
GridLayoutStyle2DSetting	Represents the 2d grid layout display style
IDisplayStyle	Represents the interface for plot display style classes Created in NX9.0.0
LineOption2D	Line display option for 2D plot
LineOption3D	Line display option for 3D plot
LineStyle2DSetting	Represents the 2d line display style
OverlayParameters	Represents the parameters passed to overlay plot records on an existing plot graph
PlateOption2D	Plate option for 2D plot
PlateOption3D	Plate option for 3D plot
Plot	Manages the plot template Not support KF
PlotParameters	Represents the parameters passed to create a plot
Preference	Manages the preference data Not support KF
ScatterStyleSetting	Represents the scatter display style
SurfaceOption3D	Surface option for 3D plot
Template2D	Manages the 2D display style Not support KF
TextBoxStyle	Text box display style
TextBoxStyleSetting	Represents the text box display style
TextOption	Text display option
TextStyle	Text display style
TextStyleSetting	Represents the text display style
WindowManager	Manages the separate graphic windows
XYPlotManager	XYPlot function manager To obtain an instance of this class use Session::XYPlotManager
AbstractionManager	Provides method for creating builder for abstraction commands in a fem part
AdjacentFaceMethod	Represents the output from the adjacent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
AfuData	Data used to create an AFU Data Record Created in NX4.0.0
AfuDataConvertor	Convert data values for the AFU Data Record To obtain an instance of this class, refer to CAE::AfuManager Created in NX5.0.0
AfuHeaderId	Data used to create header id information for an AFU Data Record Created in NX5.0.0
AfuManager	AFU File and Data Record Manager To obtain an instance of this class, refer to Session Created in NX4.0.0
AfuMathOperation	Does math operations on the AFU Data Records To obtain an instance of this class, refer to CAE::AfuManager Created in NX5.0.0
AssignNodalCSBuilder	Represents a @link CAE::AssignNodalCSBuilder CAE::AssignNodalCSBuilder@endlink <br> To create a new instance of this class, use @link CAE::NodeElementInfoManager::CreateAssignNodalCsBuilder CAE::NodeElementInfoManager::CreateAssignNodalCsBuilder @endlink <br> Default values
AssyFEModel	This class represents an Assembly Finite Element Model
AssyFemPart	Represents an NX part of type .afm
AutoBCBuilder	Builds one or more CAE::SimSimulationObject object(s)
AutoMacViewerBuilder	Represents the correlation pairing viewer builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreateAutoMacViewerBuilder Created in NX6.0.0
AutomaticMorphBuilder	Represents a CAE::AutomaticMorphBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateAutomaticMorphBuilder Created in NX9.0.0
AutomaticSweepBetweenSelection	Builder for creating Manual Hex Mesh - Face Dependency type - Multi Face Automatic To create a new instance of this class, use CAE::SweepBetweenMeshBuilder::AutomaticSweepBetween Created in NX7.5.2
AutoPairs	Represents an autopairs obj
AutoPairsBuilder	Builds a CAE::AutoPairs object which represets a recipe for generating face pairs from a selected set of faces or solids in the model whose distance is less than a specified tolerance
BaseFEModel	This class represents an Assembly Finite Element Model
BaseFemPart	Represents an NX part of type .afm
BaseIteration	This class provides interfaces to query iteration attributes An instance of this class can not be obtained Created in NX7.5.0
BaseLoadcase	This class provides interfaces to query loadcase attributes An instance of this class can not be obtained Created in NX7.5.0
BaseResultType	This class provides interfaces to query result type attributes An instance of this class can not be obtained Created in NX7.5.0
BeamEADBuilder	This class provides Beam/Bar Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateBeamEadBuilder CAE::NodeElementManager::CreateBeamEadBuilder @endlink <br> Default values
BeamSection	Represents a Beam Cross Section This is an abstract class
Properties	Represents the properties of the beam section
BeamSectionCollection	Represents the collection of all CAE::BeamSection in a fem part
iterator	Iterator for accessing the contents of the collection
BeamSectionOffsetOptions	<br> To create a new instance of this class, use @link CAE::CaePart::NewBeamSectionOffsetOptions CAE::CaePart::NewBeamSectionOffsetOptions @endlink <br> Created in NX7.5.0
Offset	Represents the offset value
BeamSectionOptions	Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file
BeamSectionOrientationOptions	<br> To create a new instance of this class, use @link CAE::CaePart::NewBeamSectionOrientationOptions CAE::CaePart::NewBeamSectionOrientationOptions @endlink <br> Created in NX7.5.0
Bolt	Represents Bolt To create or edit an instance of this class, use CAE::BoltBuilder Created in NX7.5.0
BoltBuilder	Represents a CAE::BoltBuilder To create a new instance of this class, use CAE::BoltCollection::CreateBoltBuilder Created in NX7.5.0
BoltCollection	Provides method for creating builder for bolt operation commands in a fem/afem part
iterator	Iterator for accessing the contents of the collection
BushingEADBuilder	This class provides Bushing Associated Data Support To create a new instance of this class, use CAE::NodeElementManager::CreateBushingEadBuilder Created in NX7.5.0
CADModeling	Method to create cad face using polygon face To obtain an instance of this class, refer to CAE::FemPart Created in NX8.5.0
CAEBody	Represents a CAE body geometry
CAEConnection	Represents Connection Recipe To create or edit an instance of this class, use CAE::CAEConnectionBuilder Created in NX6.0.0
CAEConnectionBuilder	Builder for creating Connection Recipes To create a new instance of this class, use CAE::CAEConnectionCollection::CreateConnectionBuilder Created in NX6.0.0
CAEConnectionCollection	Provides method for creating builder for connection operation commands in a fem/afem part
iterator	Iterator for accessing the contents of the collection
CaeDataContainer	Represents a list of named properties, where the property name is a unique string
CaeDOFSet	Represents a dofset class CAE::CaeDOFSet
CaeDOFSetCollection	Provides methods for managing DOFSet CAE::CaeDOFSet
iterator	Iterator for accessing the contents of the collection
CaeDOFSetDisplay	Represents a DOF Set display attributes
CAEEdge	Represents a CAE edge geometry
CAEFace	Represents a CAE face geometry
CaeGroup	Represents a group class CAE::CaeGroup
CaeGroupCollection	Provides methods for managing set CAE::CaeGroup
AutoGroupErrorCodes	Contains list of error codes for each auto group type
AutoGroupSeedNames	Contains the prefix seed names to be given to auto created groups by type If a seed value is passed as NULL, then the auto created groups by that type will be given a default prefix List of default prefixes are as follows: MAT- for material_seed PPT- for ppt_seed Color- for color_seed XSECT- for section_seed LAM- for laminate seed DIM- for dimension seed FE_TYPE- for meshcolltype_seed
AutoGroupTypes	Contains information about the types by which we do auto grouping
iterator	Iterator for accessing the contents of the collection
CaePart	This is an abstract class for NX parts of type .fem and .sim
CaeRegion	Represents a cae region object
CaeRegionBuilder	Represents a CAE::CaeRegionBuilder builder To create a new instance of this class, use CAE::SimSimulation::CreateCaeRegionBuilder Created in NX7.0.0
CaeRegionCollection	Provides methods for managing CAE::CaeRegion in a sim part
iterator	Iterator for accessing the contents of the collection
CaeSession	This class provides access to all session related CAE functionality
CAESet	Represents a group of CAE object sets
CAEVertex	Represents a CAE vertex geometry
CAEWeldConnection	Represents WeldConnection Recipe To create or edit an instance of this class, use CAE::CAEWeldConnectionBuilder Created in NX6.0.0
CAEWeldConnectionBuilder	Builder for creating 1D Weld Connection To create a new instance of this class, use CAE::CAEConnectionCollection::CreateWeldConnectionBuilder Created in NX6.0.0
CfdContactPreventionConstraint	The contact prevention constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain
CfdContactPreventionConstraintBuilder	Represents a CAE::CfdContactPreventionConstraint builder To create a new instance of this class, use CAE::CfdContactPreventionConstraintCollection::CreateBuilder Created in NX9.0.0
CfdContactPreventionConstraintCollection	Provides methods for managing Contact Prevention ConstraintsCAE::CfdContactPreventionConstraint in a fem part
iterator	Iterator for accessing the contents of the collection
CfdLocalResolutionConstraint	The local resolution constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain
CfdLocalResolutionConstraintBuilder	Represents a CAE::CfdLocalResolutionConstraint builder To create a new instance of this class, use CAE::CfdLocalResolutionConstraintCollection::CreateBuilder Created in NX9.0.0
CfdLocalResolutionConstraintCollection	Provides methods for managing Local Resolution ConstraintsCAE::CfdLocalResolutionConstraint in a fem part
iterator	Iterator for accessing the contents of the collection
CircularEdgeMethod	Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.0
CircularImprintBuilder	Builder for creating Circular Imprint To create a new instance of this class, use CAE::AbstractionManager::CreateCircularImprintBuilder Created in NX7.5.0
ClippingParameters	This class is worked as a packet of information that can be used to set the clipping parameters of a CAE::Post object
ComacViewerBuilder	Represents the correlation MAC matrix viewer builder To create a new instance of this class, use CAE::CorrelSolutionCollection::CreateComacViewerBuilder Created in NX6.0.0
CombineTrisBuilder	Builder for creating Combine Tris To create a new instance of this class, use CAE::NodeElementManager::CreateCombineTrisBuilder Created in NX7.0.0
CompanionResult	Represents additional results data that will augment a primary set of Analysis results associated to a CAE::SimSolution
CompanionResultBuilder	Represents a @link CAE::CompanionResult CAE::CompanionResult@endlink builder and can be used to create or edit an @link CAE::CompanionResult CAE::CompanionResult@endlink <br> To create a new instance of this class, use @link CAE::CompanionResultCollection::CreateCompanionResultBuilder CAE::CompanionResultCollection::CreateCompanionResultBuilder @endlink <br> Default values
CompanionResultCollection	Provides methods for managing CompanionResults CAE::CompanionResult in a CAE::SimSolution
iterator	Iterator for accessing the contents of the collection
ConstraintResolutionBuilder	Represents a CAE::ConstraintResolutionBuilder builder which can resolve conflicts between the two input constraints by a specified rule To create a new instance of this class, use CAE::SimSolution::CreateConstraintResolutionBuilder Created in NX8.0.0
CorrelAlignmentBuilder	This builder is used to control the alignment parameters of a CAE::CorrelSolution To create a new instance of this class, use CAE::SimSolution::CreateAlignmentBuilder Created in NX6.0.1
ReferencePt	Specifies the data for the selected reference points
CorrelApplyAlignmentFromBuilder	This builder is used to apply the alignment matrix read from selected xml file to the test model To create a new instance of this class, use CAE::CorrelManager::CreateCorrelApplyAlignmentFromBuilder Created in NX9.0.0
CorrelBaseBuilder	Represents the abstract builder class for all objects defined in correl meta solution This is an abstract class, and cannot be created
CorrelFineTuneAlignmentBuilder	This builder is used to nudge the alignment by a fine adjustment To create a new instance of this class, use CAE::CorrelManager::CreateCorrelFineTuneAlignmentBuilder Created in NX9.0.0
CorrelManager	Represents the correl manager that contains all correl and pre-test objects To obtain an instance of this class, refer to CAE::SimSimulation Created in NX6.0.0
CorrelModePairingBuilder	This builder is used to control the mode pairing behavior of a CAE::CorrelSolution To create a new instance of this class, use CAE::CorrelSolution::CreateModePairingBuilder Created in NX6.0.1
CorrelSolution	Represents a CAE::CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions To create or edit an instance of this class, use CAE::CorrelSolutionBuilder Created in NX6.0.0
CorrelSolutionBuilder	This is a manager to the CAE::CorrelSolution class
CorrelSolutionCollection	Represents a collection of correl meta solution To obtain an instance of this class, refer to CAE::CorrelManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
CrossSectionParameters	This class is worked as a packet of information that can be used to change cross-section state
CylinderFaceMethod	Represents the output from the cylinder face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
DeformationParameters	This class is worked as a packet of information that can be be used to deform CAE::Post objects
DeletePolygonFaceBuilder	Builder for Delete Polygon Face To create a new instance of this class, use CAE::AbstractionManager::CreateDeletePolygonFaceBuilder Created in NX8.5.0
DependentMesh	Represents Mesh Recipe To create or edit an instance of this class, use CAE::DependentMeshBuilder Created in NX5.0.0
DependentMeshBuilder	Represents a CAE::Mesh2d To create a new instance of this class, use CAE::MeshManager::CreateDependentMeshBuilder Created in NX5.0.0
DependentMeshListItemBuilder	Represents a CAE::DependentMeshListItemBuilder To create a new instance of this class, use CAE::DependentMeshBuilder::CreateNewListItem Created in NX5.0.0
DependentMeshListItemBuilderList	Represents a list of objects
DestinationCollectorBuilder	Represents a Element Collector Container (Ecc) selection
DurabilityAxisSearch	Represents a CAE::DurabilityAxisSearch
DurabilityAxisSearchCollection	Represents a collection of stress axes
iterator	Iterator for accessing the contents of the collection
DurabilityDamageEvaluationBuilder	Represents the builder for evaluating durability damage
DurabilityDamageReportBuilder	Represents the builder for reporting the durability damage
DurabilityDataControlBuilder	Represents a builder class for the transient event data control
DurabilityEvaluateFatigueHistoryBuilder	Represents the builder for evaluating fatigue histories
DurabilityEvent	Represents a CAE::DurabilityEvent , which is an event of a durability solution process
DurabilityEventBuilder	Represents the abstract builder class for all durability events
DurabilityEventCollection	Represents a collection of durability events
iterator	Iterator for accessing the contents of the collection
DurabilityEventFatigueSettingsBuilder	Represents a builder class for the event fatigue settings
DurabilityEventOverridesBuilder	Represents a builder class for Event Overrides
DurabilityEventSolverBuilder	Represents the builder for solving the durability event
DurabilityEventStrengthSettingsBuilder	Represents a builder class for the event strength settings
DurabilityExcitation	Represents a CAE::DurabilityExcitation
DurabilityExcitationBuilder	Represents the abstract builder class for all durability excitations
DurabilityExcitationCollection	Represents a collection of durability excitations
iterator	Iterator for accessing the contents of the collection
DurabilityFatigue	Represents a CAE::DurabilityFatigue
DurabilityFatigueCollection	Represents a collection of event fatigue settings
iterator	Iterator for accessing the contents of the collection
DurabilityFunctionExcitation	Represents a CAE::DurabilityFunctionExcitation
DurabilityFunctionExcitationBuilder	Represents a CAE::DurabilityFunctionExcitation builder
DurabilityLoadPattern	Represents a CAE::DurabilityLoadPattern
DurabilityLoadPatternBuilder	Represents a CAE::DurabilityLoadPattern builder
DurabilityManager	Represents the durability manager that contains all durability objects
DurabilityMetaSolution	Represents a CAE::DurabilityMetaSolution
DurabilityMetaSolutionBuilder	Represents a CAE::DurabilityMetaSolution builder
DurabilityMetaSolutionCollection	Represents a collection of correl meta solution
iterator	Iterator for accessing the contents of the collection
DurabilityRandomEvent	Represents a CAE::DurabilityRandomEvent
DurabilityRandomEventBuilder	Represents the builder for the random durability event
DurabilityRandomFatigue	Represents a CAE::DurabilityRandomFatigue
DurabilityRandomFatigueBuilder	Represents a builder class for the event fatigue settings
DurabilityRandomFatigueCollection	Represents a collection of random fatigue
iterator	Iterator for accessing the contents of the collection
DurabilityResultPath	Represents a CAE::DurabilityResultPath
DurabilityResultPathBuilder	Represents a CAE::DurabilityResultPath builder
DurabilityResultsReportBuilder	Represents the builder for reporting the durability results
DurabilitySolveOptions	Represents a CAE::DurabilitySolveOptions
DurabilitySolveOptionsCollection	Represents a collection of correl meta solution
iterator	Iterator for accessing the contents of the collection
DurabilitySolverBuilder	Represents the builder for solving the durability solution process
DurabilityStaticEvent	Represents a CAE::DurabilityStaticEvent
DurabilityStaticEventBuilder	Represents the builder for the static durability event
DurabilityStrainGageAnalyzerBuilder	Represents the builder for analyzing strain gage data
DurabilityStrength	Represents a CAE::DurabilityStrength
DurabilityStrengthCollection	Represents a collection of event strength settings
iterator	Iterator for accessing the contents of the collection
DurabilityStressAxesBuilder	Represents a builder class for the event fatigue settings
DurabilityTransientEvent	Represents a CAE::DurabilityTransientEvent
DurabilityTransientEventBuilder	Represents the builder for the transient durability event
EdgeDensity	Represents a CAE edge density
EdgePathMethod	Represents a CAE::EdgePathMethod
EdgeSticherBuilder	Represents a @link CAE::EdgeSticherBuilder CAE::EdgeSticherBuilder@endlink <br> To create a new instance of this class, use @link CAE::FemPart::CreateEdgeSticherBuilder CAE::FemPart::CreateEdgeSticherBuilder @endlink <br> Default values
ElemEdgePathMethod	Represents a CAE::ElemEdgePathMethod
ElementConnectivityBuilder	Represents a CAE::ElementConnectivityBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementConnectivityBuilder Created in NX5.0.0
ElementCreateBuilder	Represents a CAE::ElementCreateBuilder which allows you to manually create elements from existing nodes
ElementDeleteBuilder	Represents a CAE::ElementDeleteBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateDeleteElementBuilder Created in NX5.0.0
ElementExtractBuilder	Builder for creating Element Extract To create a new instance of this class, use CAE::NodeElementManager::CreateElementExtractBuilder Created in NX7.5.0
ElementExtrudeBuilder	Represents a CAE::ElementExtrudeBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementExtrudeBuilder Created in NX5.0.0
ElementModifyLabelBuilder	Represents a CAE::ElementModifyLabelBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyLabelBuilder Created in NX5.0.0
ElementModifyOrderBuilder	Represents a CAE::ElementModifyOrderBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyOrderBuilder Created in NX6.0.1
ElementModifyTypeBuilder	Represents a CAE::ElementModifyTypeBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyTypeBuilder Created in NX8.5.0
ElementProjectBuilder	Represents a CAE::ElementProjectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementProjectBuilder Created in NX5.0.0
ElementReflectBuilder	Represents a CAE::ElementReflectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementReflectBuilder Created in NX5.0.0
ElementRevolveBuilder	Represents a CAE::ElementRevolveBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementRevolveBuilder Created in NX5.0.0
ElementSplitBuilder	Represents a CAE::ElementSplitBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementSplitBuilder Created in NX5.0.0
ElementTranslateBuilder	Represents a CAE::ElementTranslateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementTranslateBuilder Created in NX5.0.0
ElementTypeBuilder	Represents the specification of the FEA Element Type for a meshing dialog
ElementTypes	Represents an ElementTypes class
FaceDensity	Represents a CAE face density
FaceFromBoundaryBuilder	Builder for creating Polygon Face by boundary To create a new instance of this class, use CAE::AbstractionManager::CreateFaceFromBoundaryBuilder Created in NX8.5.0
FeatureEdgeNodeMethod	Represents the output from the feature edge node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FeatureElemEdgeMethod	Represents the output from the feature element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FeatureElemFaceMethod	Represents the output from the feature element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FeatureElemMethod	Represents the output from the feature element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FeatureNodeMethod	Represents the output from the feature node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FeatureShellElemMethod	Represents the output from the feature shell element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.2
FEElemEdge	Represents a Finite Element Edge
FEElement	Represents a Finite Element
FEElementLabelMap	Represents a Elementl Label to an CAE::FEElement map, it can be used to quickly convert a CAE::FEElement label, which is generally used in solver input files and results files, in the element object itself CAE::FEElement
FEElemFace	Represents a Finite Element Face
FEModel	This class represents a Finite Element Model
IdSpecificationObject	Structure to specify the Node, Element, and Physical property table start ids and offsets for use in CAE::FEModel::AppendFemodel
FEModelOccAttribute	This class represents an Interface to the Finite Element Model Attributes
FEModelOccurrence	This class represents a Finite Element Model Occurrence
FemPart	Represents an NX part of type .fem
FemSynchronizeOptions	Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file
FENode	Represents a Finite Element
FENodeLabelMap	Represents a Nodel Label to an CAE::FENode map, it can be used to quickly convert a CAE::FENode label, which is generally used in solver input files and results files, in the node object itself CAE::FENode
FilletFaceMethod	Represents the output from the fillet face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
FlatPatternsBuilder	Represents a Flat Patterns Builder
FluidDomainBuilder	Represents a @link CAE::FluidDomainRecipe CAE::FluidDomainRecipe@endlink <br> To create a new instance of this class, use @link CAE::FluidDomainCollection::CreateBuilder CAE::FluidDomainCollection::CreateBuilder @endlink <br> Default values
FluidDomainCollection	Provides methods for managing fluid domainsCAE::FluidDomainRecipe in a fem part
iterator	Iterator for accessing the contents of the collection
FluidDomainRecipe	Represents a FluidDomainRecipe
FreeBodyResultsBuilder	Represents a CAE::FreeBodyResultsBuilder To obtain an instance of this class use Session::ResultManager
Function	Represents a function object To create or edit an instance of this class, use CAE::FunctionBuilder Created in NX5.0.0
FunctionBuilder	This builder class is used to create or edit CAE::Function objects
FunctionCollection	Represents a collection of function objects To obtain an instance of this class, refer to BasePart Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
GapEADBuilder	This class provides Gap Associated Data Support To create a new instance of this class, use CAE::NodeElementManager::CreateGapEadBuilder Created in NX7.5.0
GeneralGeometryBeamSection	Represents a General Geometry Beam Cross Section To create or edit an instance of this class, use CAE::GeneralGeometryBeamSectionBuilder Created in NX7.5.0
GeneralGeometryBeamSectionBuilder	Represents a CAE::GeneralGeometryBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateGeneralGeometryBeamSectionBuilder Created in NX7.5.0
GlobalLayupImportFromPptBuilder	Represents a Global Layup IMport From Ppt Builder
GRMSearch	Contains methods for searching Teamcenter for CAE objects, as well as a cache of already found items
GroupElemMethod	Represents the output from the Group Element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
GroupElemMethodElemOption	Represents the output from the Group Element smart selector method
GroupFaceMethod	Represents the output from the Group Face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
GroupMethod	Represents the output from the Group smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
GroupNodeMethod	Represents the output from the Group Node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
IBeamSectionBuilder	Represents a CAE::IBeamSectionBuilder This is an abstract class Created in NX7.5.0
IExportableFEEntity	Represents an EXPORTABLE_FE_ENTITY
IFEModel	This class represents an Interface to the Finite Element Model
IFolder	This class represents an Interface to the Folder
IHierarchicalFEModel	This class represents an Interface to the Finite Element Model
IMeshCollector	Represents the base IMeshCollector class for MeshCollector and MeshCollectorOccurrence classes
IMeshManager	Manages meshesCAE::IMeshManager in cae parts
ImportedResult	Represents analysis results for a imported solver results file
Iteration	Represents iteration present in a CAE::Loadcase
Laminate	Represents a Laminate, which is a specialized kind of CAE::PhysicalPropertyTable
LaminateDampingFactorBuilder	The builder for the damping factor
LaminateDrapingData	Encapsulate the ply information related to the draping algorithm To create or edit an instance of this class, use CAE::LaminateDrapingDataBuilder Created in NX6.0.0
LaminateDrapingDataBuilder	Represents a CAE::LaminateDrapingData builder To create a new instance of this class, use CAE::LaminatePly::CreateDrapingDataBuilder Created in NX6.0.0
LaminateDrapingExtension	Encapsulate the ply information related to a ply draping extension To create or edit an instance of this class, use CAE::LaminateDrapingExtensionBuilder Created in NX8.5.0
LaminateDrapingExtensionBuilder	Builder class for CAE::LaminateDrapingExtension To create a new instance of this class, use CAE::LaminatePly::CreateDrapingExtensionBuilder Created in NX8.5.0
LaminateDrapingOrientation	Encapsulates the ply draping results Don't support KF
LaminateDynamicEvent	The Laminate Dynamic Event
LaminateDynamicEventCollection	Represents a collection of laminate dynamic events To obtain an instance of this class, refer to CAE::LaminateDynamicSim Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
LaminateDynamicSim	The Laminate Dynamic Simulation builder is the journalling interface to build the LaminateDyanmicSim object
LaminateDynamicSimBuilder	Represents a CAE::LaminateDynamicSim builder To create a new instance of this class, use CAE::LaminateDynamicSimCollection::CreateDynamicSimBuilder Created in NX9.0.0
LaminateDynamicSimCollection	Represents a collection of laminate dynamic sims To obtain an instance of this class, refer to CAE::LaminateManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
LaminateElementFilterBuilder	Represents a CAE::LaminateGraphicalReport builder There is no kf creator
LaminateExtrudeSetup	Extrude Setup To create or edit an instance of this class, use CAE::LaminateExtrudeSetupBuilder Created in NX6.0.4
LaminateExtrudeSetupBuilder	Represents a @link CAE::LaminateExtrudeSetup CAE::LaminateExtrudeSetup@endlink builder <br> To create a new instance of this class, use @link CAE::LaminateGlobalLayupMgr::CreateLaminateExtrudeSetupBuilder CAE::LaminateGlobalLayupMgr::CreateLaminateExtrudeSetupBuilder @endlink <br> Default values
LaminateExtrudeSetupCollection	Represents a collection of laminate extrusion setups To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
LaminateFiberOrientationOptions	Laminate Fiber Orientation Options To create or edit an instance of this class, use CAE::LaminateFiberOrientationOptionsBuilder Created in NX7.5.0
LaminateFiberOrientationOptionsBuilder	Represents a CAE::LaminateFiberOrientationOptions builder To create a new instance of this class, use CAE::LaminateGlobalLayup::CreateFiberOrientationOptionsBuilder Created in NX7.5.0
LaminateFillSetupBuilder	Represents a CAE::LaminateFillSetupBuilder builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateFillSetupBuilder Created in NX7.5.2
LaminateGlobalLayup	Represent a global layup in the ply based modeling
LaminateGlobalLayupCollection	Represents a global layup, which is defined by a sequence of CAE::LaminateGlobalLayup , each with a name and a list of plies
iterator	Iterator for accessing the contents of the collection
LaminateGlobalLayupMgr	Represent the laminate global layup manager which manages all the global layups in the laminate ply-based modeling project To obtain an instance of this class, refer to CAE::FEModel Created in NX6.0.0
LaminateGlobalLayupPlyGroupCollection	Represents a laminate layup in the global layup context (ply based modeling), which is defined by a sequence of CAE::LaminatePlyGroup , each with a name and a list of plies
iterator	Iterator for accessing the contents of the collection
LaminateGraphicalReport	Represents a laminate graphical report There is no kf creator
LaminateGraphicalReportBuilder	Represents a CAE::LaminateGraphicalReport builder There is no kf creator
LaminateGraphicalReportCollection	Represents a collection of CAE::LaminateGraphicalReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
LaminateImportedLayupBuilder	Represents a @link CAE::LaminateImportedLayupBuilder CAE::LaminateImportedLayupBuilder@endlink builder <br> To create a new instance of this class, use @link CAE::LaminateGlobalLayupMgr::CreateLaminateImportedLayupBuilder CAE::LaminateGlobalLayupMgr::CreateLaminateImportedLayupBuilder @endlink <br> Default values
LaminateLayupOffset	Laminate layup offset
LaminateLayupOffsetBuilder	Represents a CAE::LaminateLayupOffset builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLayupOffsetBuilder Created in NX7.5.0
LaminateLayupOffsetCollection	Represents a collection of layup offset rules To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
LaminateLockAngleBuilder	Represents a builder To create a new instance of this class, use CAE::LaminateGlobalLayup::CreateLockAngleBuilder Created in NX7.5.0
LaminateManager	Represents the laminate manager that contains all laminate post report setups To obtain an instance of this class, refer to CAE::SimSimulation Created in NX8.0.0
LaminateMatOrientation	Laminate Material Orientation To create or edit an instance of this class, use CAE::LaminateMatOrientationBuilder Created in NX7.5.0
LaminateMatOrientationBuilder	Represents a CAE::LaminateMatOrientation builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateMatOrientationBuilder Created in NX7.5.0
LaminateMatOrientationCollection	Represents a collection of layup growth rules To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
LaminateMetaSol	Deprecated
LaminateMetaSolBuilder	Represents a @link CAE::LaminateMetaSol CAE::LaminateMetaSol@endlink builder <br> To create a new instance of this class, use @link CAE::SimSimulation::CreateLaminateMetaSolBuilder CAE::SimSimulation::CreateLaminateMetaSolBuilder @endlink <br> Default values
LaminateModeProperty	Represents the properties of one normal mode Created in NX9.0.0
LaminateModePropertyCollection	Represents a collection of laminate mode properties To obtain an instance of this class, refer to CAE::LaminateDynamicSim Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
LaminatePly	Represents one ply in a laminate layup
LaminatePlyCollection	Represents a list of plies, which have a material, a thickness, an orientation, and a color
iterator	Iterator for accessing the contents of the collection
LaminatePlyFilterBuilder	Represents a CAE::LaminatePlyFilterBuilder There is no kf creator
LaminatePlyGroup	Represents one ply group in a laminate layup
LaminatePlyGroupCollection	Represents a laminate layup, which is defined by a sequence of CAE::LaminatePlyGroup , each with a name and a list of plies
iterator	Iterator for accessing the contents of the collection
LaminatePlyMaxThicknessVarBuilder	Builder used to modify the ply maximum accepted thickness variation for laminate fill To create a new instance of this class, use CAE::LaminatePly::CreateLaminatePlyMaxThicknessVarBuilder Created in NX8.5.0
LaminatePostReport	Represents an advanced post reporting setup for laminate results
LaminatePostReportBuilder	Represents a CAE::LaminatePostReport builder There is no kf creator
LaminatePostReportCollection	Represents a collection of laminate post reports To obtain an instance of this class, refer to CAE::LaminateManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
LaminateQuickPostReport	Laminate quick post summary report
LaminateQuickPostReportBuilder	Represents a @link CAE::LaminateQuickPostReport CAE::LaminateQuickPostReport@endlink builder <br> To create a new instance of this class, use @link CAE::SimSimulation::CreateLaminateQuickPostReportBuilder CAE::SimSimulation::CreateLaminateQuickPostReportBuilder @endlink <br> Default values
LaminateQuickReport	Represents a laminate quick report There is no kf creator
LaminateQuickReportBuilder	Represents a CAE::LaminateQuickReport builder There is no kf creator
LaminateQuickReportCollection	Represents a collection of CAE::LaminateQuickReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
LaminateRandomEvent	The Laminate Dynamic Event
LaminateRandomEventBuilder	Represents a CAE::LaminateRandomEvent builder To create a new instance of this class, use CAE::LaminateDynamicEventCollection::CreateRandomEventBuilder Created in NX9.0.0
LaminateSelectEntitiesBuilder	Represents a CAE::LaminateSelectEntitiesBuilder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateSelectEntitiesBuilder Created in NX7.5.2
LaminateSpreadsheetReport	Represents a laminate spreadsheet report There is no kf creator
LaminateSpreadsheetReportBuilder	Represents a CAE::LaminateSpreadsheetReport builder There is no kf creator
LaminateSpreadsheetReportCollection	Represents a collection of CAE::LaminateSpreadsheetReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
LaminateViewDrapingResultsBuilder	Represents the builder for the draping results viewer To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateViewDrapingResultsBuilder Created in NX6.0.0
Loadcase	Represents loadcases present in a CAE::Result
LocalRemeshBuilder	Represents a @link CAE::LocalRemeshBuilder CAE::LocalRemeshBuilder@endlink <br> To create a new instance of this class, use @link CAE::MeshManager::CreateLocalRemeshBuilder CAE::MeshManager::CreateLocalRemeshBuilder @endlink <br> Default values
LumpedMassEADBuilder	This class provides LumpedMass Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateLumpedMassEadBuilder CAE::NodeElementManager::CreateLumpedMassEadBuilder @endlink <br> Default values
ManualMorphBuilder	Represents a CAE::ManualMorphBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateManualMorphBuilder Created in NX9.0.0
ManualSweepBetweenListItemSelection	Represents a CAE::ManualSweepBetweenListItemSelection To create a new instance of this class, use CAE::ManualSweepBetweenSelection::CreateNewListItem Created in NX7.5.2
ManualSweepBetweenListItemSelectionList	Represents a list of objects
ManualSweepBetweenSelection	Builder for creating Manual Hex Mesh - Face Dependency type
MappedHole	Represents a CAE mapped hole
MappedMesh	Represents Mesh Recipe To create or edit an instance of this class, use CAE::MappedMeshBuilder Created in NX5.0.0
MappedMeshBuilder	Represents a Mapped Mesh Builder
MappedResult	Represents analysis results for a imported solver results file
MaterialOptions	Represents the material options to be used when assigning a material to cae part
MechanicalLoadSumBuilder	Represents a CAE::MechanicalLoadSumBuilder To create a new instance of this class, use CAE::ModelCheckManager::CreateMechanicalLoadSumBuilder Created in NX5.0.1
Mesh	Represents a Mesh
Mesh0d	Represents 0d Mesh To create or edit an instance of this class, use CAE::Mesh0dBuilder Created in NX6.0.0
Mesh0dBuilder	Represents 0D Mesh Used to create a CAE::Mesh0d To create a new instance of this class, use CAE::MeshManager::CreateMesh0dBuilder Created in NX6.0.0
Mesh1d	Represents 1d Mesh To create or edit an instance of this class, use CAE::Mesh1dBuilder Created in NX6.0.0
Mesh1dBuilder	Represents 1d Mesh Used to create a CAE::Mesh1d To create a new instance of this class, use CAE::MeshManager::CreateMesh1dBuilder Created in NX6.0.0
Mesh2d	Represents 2d Mesh This is an abstract class Created in NX6.0.0
Mesh2dBuilder	Represents 2D Mesh Used to create a CAE::Mesh2d To create a new instance of this class, use CAE::MeshManager::CreateMesh2dBuilder Created in NX6.0.0
Mesh2dFree	Represents 2d Mesh To create or edit an instance of this class, use CAE::Mesh2dBuilder Created in NX6.0.0
Mesh3d	Represents 3d Mesh To create or edit an instance of this class, use CAE::Mesh3dTetBuilder Created in NX6.0.0
Mesh3dHexBuilder	Represents 3D Hex Mesh Used to create a CAE::SweptMesh To create a new instance of this class, use CAE::MeshManager::CreateMesh3dHexBuilder Created in NX6.0.0
Mesh3dTetBuilder	Represents 3D Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use CAE::MeshManager::CreateMesh3dTetBuilder Created in NX6.0.0
MeshCollector	Represents a MeshCollector
MeshCollectorBuilder	Represents a CAE::MeshCollectorBuilder To create a new instance of this class, use CAE::MeshManager::CreateCollectorBuilder Created in NX5.0.0
MeshCollectorDisplayDefaults	Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and MeshCollectorOccurrence classes
MeshCollectorDisplayDefaults0d	Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshCollectorDisplayDefaults1d	Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshCollectorDisplayDefaults2d	Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshCollectorDisplayDefaults3d	Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshCollectorOccurrence	Represents a MeshCollector Occurrence
MeshCollectorOccurrenceBuilder	Represents a CAE::MeshCollectorOccurrenceBuilder To create a new instance of this class, use CAE::MeshManagerOccurrence::CreateOccurrenceBuilder Created in NX5.0.0
MeshControl	Represents a MeshControl
MeshControlBuilder	Represents a @link CAE::MeshControl CAE::MeshControl@endlink <br> To create a new instance of this class, use @link CAE::MeshControlCollection::CreateBuilder CAE::MeshControlCollection::CreateBuilder @endlink <br> Default values
MeshControlCollection	Provides methods for managing mesh controlsCAE::MeshControl in a fem part
iterator	Iterator for accessing the contents of the collection
MeshControlDisplayManager	Provides method for creating builder for mesh control display operation commands in both sim and fem part
MeshControlDisplayOptionsBuilder	Represents a CAE::MeshControlDisplayOptionsBuilder To create a new instance of this class, use CAE::MeshControlDisplayManager::CreateBuilder Created in NX5.0.0
MeshDisplaySettings	Represents the base MeshDisplaySettings class for Mesh class
MeshDisplaySettings0d	Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshDisplaySettings1d	Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshDisplaySettings2d	Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshDisplaySettings3d	Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0
MeshFollower	Represents Mesh Recipe This is an abstract class Created in NX7.5.0
MeshFromBoundaryBuilder	Represents a @link CAE::MeshFromBoundaryBuilder CAE::MeshFromBoundaryBuilder@endlink <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateMeshFromBoundaryBuilder CAE::NodeElementManager::CreateMeshFromBoundaryBuilder @endlink <br> Created in NX9.0.0
MeshManager	Creates MeshesCAE::Mesh in a fem part
MeshManagerOccurrence	Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part
MeshMate	Represents a Mesh Mate
MeshPoint	Represents a smart MeshPoint
MeshPointCollection	Provides methods for managing constraints CAE::MeshPoint in a sim part
iterator	Iterator for accessing the contents of the collection
MeshPointConicCenterBuilder	Represents a CAE::MeshPointConicCenterBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointConicCenterBuilder Created in NX5.0.2
MeshPointExistingPointBuilder	Represents a CAE::MeshPointExistingPointBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointExistingPointBuilder Created in NX5.0.2
MeshPointMultipleOnCurveBuilder	Represents a CAE::MeshPointMultipleOnCurveBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointMultipleOnCurveBuilder Created in NX5.0.2
MeshPointOnCurveBuilder	Represents a CAE::MeshPointOnCurveBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointOnCurveBuilder Created in NX5.0.2
MeshPointOnFaceBuilder	Represents a CAE::MeshPointOnFaceBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointOnFaceBuilder Created in NX5.0.2
MeshPointProjectBuilder	Represents a CAE::MeshPointProjectBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointProjectBuilder Created in NX5.0.2
MeshShellFromSolid	Represents 2d Mesh that follows 3d mesh To create or edit an instance of this class, use CAE::SurfaceCoatBuilder Created in NX7.5.0
MMCCreateBuilder	Represents a CAE::MMCCreateBuilder which can be used to create or edit CAE::MeshMate objects
ModelCheckManager	Provides method for creating builder for node element operation commands in a fem part
ModelDisplayBuilder	This class provides Model Display Data Support <br> To create a new instance of this class, use @link CAE::CaePart::CreateModelDisplayBuilder CAE::CaePart::CreateModelDisplayBuilder @endlink <br> Default values
ModelingObjectPropertyTable	Represents a Modeling Object Property Table
ModelingObjectPropertyTableCollection	Creates Modeling Object property tablesCAE::ModelingObjectPropertyTable in a fem model
iterator	Iterator for accessing the contents of the collection
ModelUpdateCorrelMethodBuilder	Represents a CAE::ModelUpdateCorrelMethodBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateCorrelMethodBuilder Created in NX7.5.0
ModelUpdateDesignVariable	Represents a CAE::ModelUpdateDesignVariable , which is a meta-solution used to update finite element models to match real life test data Created in NX8.0.1
ModelUpdateDesignVariablesCollection	Represents a collection of durability events
iterator	Iterator for accessing the contents of the collection
ModelUpdateDesignVariablesRapidCreateBuilder	This class is the builder that is used for the rapid creation of design variables
ModelUpdateOptimOptionsBuilder	Represents a CAE::ModelUpdateOptimOptionsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOptimOptionsBuilder Created in NX7.5.0
ModelUpdateOptionsBuilder	Represents a CAE::ModelUpdateOptionsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOptionsBuilder Created in NX7.5.0
ModelUpdateOverallWeightsBuilder	Represents a CAE::ModelUpdateOverallWeightsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOverallWeightsBuilder Created in NX7.5.0
ModelUpdateSensitivityViewerBuilder	Represents CAE::ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use CAE::ModelUpdateSolutionCollection::CreateSensitivityViewerBuilder Created in NX6.0.0
ModelUpdateSolution	Represents a CAE::ModelUpdateSolution , which is a meta-solution used to update finite element models to match real life test data To create or edit an instance of this class, use CAE::ModelUpdateSolutionBuilder Created in NX7.5.0
ModelUpdateSolutionBuilder	Represents a CAE::ModelUpdateSolutionBuilder To create a new instance of this class, use CAE::ModelUpdateSolutionCollection::CreateSolutionBuilder Created in NX7.5.0
ModelUpdateSolutionCollection	Represents a collection of model update meta solution To obtain an instance of this class, refer to CAE::CorrelManager
iterator	Iterator for accessing the contents of the collection
ModifiableFEModelOccAttribute	This class represents an Interface to the Finite Element Model
MultipleElementCreateBuilder	Represents a CAE::MultipleElementCreateBuilder which can be used to create mutiple elements in one efficient opertation
MultipleNodeCreateBuilder	Represents a CAE::MultipleNodeCreateBuilder which can be used to create mutiple nodes in one efficient opertation
NamedPropertyTable	Represents a CAE::NamedPropertyTable which is a superclass to CAE::PhysicalPropertyTable
NamedPropTableWithTargetSet	Represents a Solver Specific Modeling Object with associated target set(s)
NodeAlignBuilder	Represents a CAE::NodeAlignBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeAlignBuilder Created in NX5.0.0
NodeAssociationBuilder	Represents a CAE::NodeAssociationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeAssociationBuilder Created in NX9.0.0
NodeCreateBuilder	Represents a CAE::NodeCreateBuilder
NodeDeleteBuilder	Represents a CAE::NodeDeleteBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeDeleteBuilder Created in NX5.0.0
NodeDissociationBuilder	Represents a CAE::NodeDissociationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeDissociationBuilder Created in NX9.0.0
NodeElementInfoBuilder	Represents a CAE::NodeElementInfoBuilder To create a new instance of this class, use CAE::NodeElementInfoManager::CreateNodeElementInfoBuilder Created in NX5.0.0
NodeElementInfoManager	Provides method for creating builder for node element info operation commands in both sim and fem part
NodeElementManager	Provides method for creating builder for node element operation commands in a fem part
NodeModifyLabelBuilder	Represents a CAE::NodeModifyLabelBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeModifyLabelBuilder Created in NX5.0.0
NodeModifyLocationBuilder	Represents a CAE::NodeModifyLocationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeModifyLocationBuilder Created in NX5.0.0
NodeProjectBuilder	Represents a CAE::NodeProjectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeProjectBuilder Created in NX8.5.0
NodeReflectBuilder	Represents a CAE::NodeReflectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeReflectBuilder Created in NX5.0.0
NodeRotateBuilder	Represents a CAE::NodeRotateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeRotateBuilder Created in NX5.0.0
NodesBetweenNodesBuilder	Represents a CAE::NodesBetweenNodesBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesBetweenNodesBuilder Created in NX5.0.0
NodesOnCurveBuilder	Represents a CAE::NodesOnCurveBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesOnCurveBuilder Created in NX5.0.0
NodesRepositionBuilder	Represents a CAE::NodesRepositionBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesRepositionBuilder Created in NX6.0.2
NodeTranslateBuilder	Represents a CAE::NodeTranslateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeTranslateBuilder Created in NX5.0.0
NxBcPlotContours	Represents a CAE::NxBcPlotContours object returned from CAE::SimBcPlotContoursBuilder::CreatePlotObject in CAE::SimBcPlotContoursBuilder
OneDimensionalElementSplitBuilder	Represents a CAE::OneDimensionalElementSplitBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateOneDimensionalElementSplitBuilder Created in NX8.5.0
OptimizerAutotest	Represents a class that is used for NX CAE Optimizer testing
PhysicalPropertyTable	Represents a Physical Property Table
PhysicalPropertyTableCollection	Creates physical property tablesCAE::PhysicalPropertyTable in a fem model
iterator	Iterator for accessing the contents of the collection
PolygonFaceOnMeshBuilder	Builder for creating Polygon Face On Mesh To create a new instance of this class, use CAE::AbstractionManager::CreatePolygonFaceOnMeshBuilder Created in NX7.5.2
Post	Represents Post-Processing To obtain an instance of this class, refer to Session Created in NX5.0.0
Animation	Animation settings
AnimationStreamline	Animation settings for streamline animation
AnnotationBox	Annotation box display settings
ASCIIDiffTolerances	Tolerances used for comparing postview ASCII display files
Axisymmetric	3D Axi-symmetric model display settings
Clipping	Cutting-plane display settings
Colorbar	Colorbar settings
EdgeFace	Edge and Face display settings
GraphIds	Graph handle
GraphParameters	Graph extraction parameters
Headerlines	Headerlines
Mark	Mark display settings
Streamline	Streamline display settings
StreamlineData	Streamline data extraction parameters
StreamlineExtraction	Streamline extraction parameters
StreamlineSeed	Streamline seed point definition
Text	Annotation text settings
PostAnnotation	Controls appearance of a annoation object in a postview
PostGraph	This class provides interfaces to query graph attributes An instance of this class can not be obtained Created in NX9.0.0
PostGraphAcrossIterationsBuilder	Represents a @link CAE::PostGraphAcrossIterationsBuilder CAE::PostGraphAcrossIterationsBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0
PostGraphAlongPathBuilder	Represents a @link CAE::PostGraphAlongPathBuilder CAE::PostGraphAlongPathBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0
PostGraphBuilder	Represents a @link CAE::PostGraphBuilder CAE::PostGraphBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0
PostGraphOrbitBuilder	Represents a @link CAE::PostGraphOrbitBuilder CAE::PostGraphOrbitBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0
PostJtExportBuilder	Represents a CAE::PostJtExportBuilder used for exporting JTs of Result Types in Post Processing To create a new instance of this class, use CAE::ResultManager::CreatePostJtBuilder Created in NX8.5.0
PreTestDofSet	Represents Dof Set within a pre-test setup To create or edit an instance of this class, use CAE::PreTestDofSetBuilder Created in NX7.5.0
PreTestDofSetBuilder	Represents a CAE::PreTestDofSet builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreatePretestDofsetBuilder Created in NX7.5.0
PreTestExciterConfig	Represent a exciter selection configuration To create or edit an instance of this class, use CAE::PreTestExciterConfigBuilder Created in NX8.0.0
PreTestExciterConfigBuilder	Represents a @link CAE::PreTestExciterConfig CAE::PreTestExciterConfig@endlink builder <br> To create a new instance of this class, use @link CAE::PreTestSolutionCollection::CreateExciterConfigBuilder CAE::PreTestSolutionCollection::CreateExciterConfigBuilder @endlink <br> Default values
PreTestExciterConfigCollection	Represents a collection of exciter selection configuration To obtain an instance of this class, refer to CAE::PreTestExciterSelectionControl Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
PreTestExciterSelectionControl	Represents a pre-test exciter selection setup To obtain an instance of this class, refer to CAE::PreTestSolution Created in NX8.0.0
PreTestExciterSelectionDofSetCollection	Represents a collection of exciter selection configuration
iterator	Iterator for accessing the contents of the collection
PreTestExportUnvBuilder	This is a manager to the CAE::PreTestExportUnvBuilder class
PreTestSensorConfig	Represent a sensor selection configuration To create or edit an instance of this class, use CAE::PreTestSensorConfigBuilder Created in NX7.5.0
PreTestSensorConfigBuilder	Represents a @link CAE::PreTestSensorConfig CAE::PreTestSensorConfig@endlink builder <br> To create a new instance of this class, use @link CAE::PreTestSolutionCollection::CreateSensorConfigBuilder CAE::PreTestSolutionCollection::CreateSensorConfigBuilder @endlink <br> Default values
PreTestSensorConfigCollection	Represents a collection of sensor selection configuration To obtain an instance of this class, refer to CAE::PreTestSensorSelectionControl Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
PreTestSensorSelectionControl	Represents a pre-test sensor selection setup To obtain an instance of this class, refer to CAE::PreTestSolution Created in NX7.5.0
PreTestSensorSelectionDofSetCollection	Represents a collection of sensor selection configuration
iterator	Iterator for accessing the contents of the collection
PreTestSolution	Represents a pre-test setup To create or edit an instance of this class, use CAE::PreTestSolutionBuilder Created in NX7.5.0
PreTestSolutionBuilder	Represents a CAE::PreTestSolution builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreatePretestBuilder Created in NX7.5.0
PreTestSolutionCollection	Represents a collection of pre-test setups To obtain an instance of this class, refer to CAE::CorrelManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
PrimitiveMesh	Represents Primitive Mesh To create or edit an instance of this class, use CAE::PrimitiveMeshBuilder Created in NX7.5.0
PrimitiveMeshBuilder	Represents Primitive Mesh Used to create a CAE::Mesh To create a new instance of this class, use CAE::MeshManager::CreatePrimitiveMeshBuilder Created in NX7.5.1
ProjectNodesToCadGeometryBuilder	Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance, and if requested this builder can adjust the node locations to put them back on to the underlying Cad geometry
PropertyTable	Represents a property table
ReassignElementsBuilder	Represents a CAE::ReassignElementsBuilder To create a new instance of this class, use CAE::MeshManager::CreateReassignElementsBuilder Created in NX5.0.0
RelatedElemEdgeMethod	Represents the output from the related element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
RelatedElemFaceMethod	Represents the output from the related element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
RelatedElemMethod	Represents the output from the related element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
RelatedFaceMethod	Represents the output from the related face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
RelatedNodeMethod	Represents the output from the related node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
Result	This class provides interfaces to query analysis results
Averaging	Averaging structure to specify averaging options
DeformationParameters	Deformation parameter structure to specify complete result state for the deformed shape This structure has been replaced by @link CAE::DeformationParameters CAE::DeformationParameters@endlink
ElementValue	Element-value structure to specify element value options
ResultBasicUnit	The basic units system for a result
ResultParameters	Result parameter structure to specify complete result state for the color display This structure has been replaced by @link CAE::ResultParameters CAE::ResultParameters@endlink
ResultSection	Result Section structure to specify a result section for beams and shells
Type	Result type structure to specify a result dataset
VelocityParameters	Velociy parameter structure to specify result state for the velocity field used in streamline extraction
ResultAccess	Represents a specific result state for a given CAE::Result
ResultManager	Manages results To obtain an instance of this class, refer to Session Created in NX6.0.2
ResultMeasure	Represents a ResultMeasure class CAE::ResultMeasure
ResultMeasureCollection	Provides methods for managing ResultMeasures CAE::ResultMeasure
iterator	Iterator for accessing the contents of the collection
ResultMeasureModelSubset	Represents a a subset of the model upon which to calculate results This is an abstract class, and cannot be created
ResultMeasureModelSubsetFE	Represents a FE-based subset of the model upon which to calculate results To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureModelSubsetGeom	Represents a geometry-based subset of the model upon which to calculate results To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureResultAllOptions	Represents the combination of all result options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureResultDirectionOptions	Represents the result directional options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureResultDirectionSectionOptions	Represents the result directional and beam/shell section options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureResultOptions	Represents the basic result options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection
ResultMeasureResultSectionOptions	Represents the result with beam/shell section options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection
ResultParameters	This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two CAE::ResultAccess objects
ResultsCombinationBuilder	Represents a CAE::ResultsCombinationBuilder To obtain an instance of this class use Session::ResultManager
ResultsEnvelopeBuilder	Represents a CAE::ResultsEnvelopeBuilder To obtain an instance of this class use Session::ResultManager
ResultsManipulationBuilder	Represents an abstract CAE::ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2
ResultsModelExportBuilder	Represents a CAE::ResultsModelExportBuilder To obtain an instance of this class use Session::ResultManager
ResultsReductionBuilder	Represents a CAE::ResultsReductionBuilder To obtain an instance of this class use Session::ResultManager
ResultType	This class represents a result type from a result file
SelectCAEBody	Represents a single object selection
SelectCAEBodyList	Represents a list of objects on a selection list
SelectCAEEdge	Represents a single object selection
SelectCAEEdgeList	Represents a list of objects on a selection list
SelectCAEFace	Represents a single object selection
SelectCAEFaceList	Represents a list of objects on a selection list
SelectElementsBuilder	Represents a CAE::SelectElementsBuilder To create a new instance of this class, use CAE::SelectElementsManager::CreateSelectElementsBuilder Created in NX5.0.0
SelectElementsManager	Provides method for creating builder for select element operation commands in both fem and sim part
SelectFEElemFaceList	Represents a list of objects on a selection list
SelectFENode	Represents a single object selection
SelectFENodeList	Represents a list of objects on a selection list
SelectMeshList	Represents a list of objects on a selection list
SetManager	Represents a group of CAE object sets
SetObject	Structure used to pass objects into SetManager and CAESet
ShapeMetricViewerBuilder	Represents the correlation Shape metrics viewer builder To create a new instance of this class, use CAE::CorrelSolutionCollection::CreateShapeMetricViewerBuilder Created in NX7.5.0
Shell2SolidBuilder	Represents 3D Tet Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use CAE::MeshManager::CreateShell2solidBuilder Created in NX6.0.0
ShellEADBuilder	This class provides Shell Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateShellEadBuilder CAE::NodeElementManager::CreateShellEadBuilder @endlink <br> Default values
ShowAdjacentBuilder	Represents a CAE::ShowAdjacentBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowAdjacentBuilder Created in NX5.0.0
ShowHideBuilder	Represents a CAE::ShowHideBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowHideBuilder Created in NX5.0.0
ShowHideManager	Provides method for creating builder for Show Hide operation commands in a fem/sim part
ShowOnlyBuilder	Represents a CAE::ShowOnlyBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowOnlyBuilder Created in NX5.0.0
SimAutoBcRecipe	Represents a simulation recipe containing the parameters needed for the generation of a set of face pairs from the faces/bodies in the model
SimBC	Represents BC class which is a superclass to CAE::SimLoad and CAE::SimConstraint
SimBCBuilder	This is a manager to the CAE::SimBC class
SimBCDisplay	Represents a BC display attributes
SimBcGroup	Represents a BC group in a solution or solution step
SimBcPlotContoursBuilder	Represents a CAE::SimBcPlotContoursBuilder builder which can be used to generate a plot of a CAE::SimBC in the graphics area
SimBcXyPlotBuilder	Represents a CAE::SimBcXyPlotBuilder builder which can be used to generate a XY plot of a CAE::SimBC in the graphics area
SimCondition	This class represents a Condition which defines a state where all or some values of CAE::SimConditionParam are known
SimConditionCollection	This class is a collection of CAE::SimCondition
iterator	Iterator for accessing the contents of the collection
SimConditionParam	This class represents a named measurable quantity
SimConditionParamCollection	This class is a collection of CAE::SimConditionParam which represents a measurable environment
iterator	Iterator for accessing the contents of the collection
SimConditionSeqMgr	This is the manager for Condition Sequences
SimConditionSequence	This class represents a time history of CAE::SimCondition
SimConditionSequenceCollection	This class is a collection of CAE::SimConditionSequence
iterator	Iterator for accessing the contents of the collection
SimConditionTimeStep	This class represents a step in the time history of a CAE::SimConditionSequence
SimConditionTimeStepCollection	This class is a collection of CAE::SimConditionTimeStep
iterator	Iterator for accessing the contents of the collection
SimConstraint	Represents a constraint
SimConstraintCollection	Provides methods for managing constraints CAE::SimConstraint in a sim part
iterator	Iterator for accessing the contents of the collection
SimConstraintGroup	Represents a constraint group in a solution or solution step
SimGroupContainer	Represents UGS::CaeSim::LbcGroupContainer
SimLbcFolder	Represents a folder object in the .sim files
SimLbcFolderCollection	Provides methods for managing LbcFolders CAE::SimLbcFolder in a sim part
iterator	Iterator for accessing the contents of the collection
SimLoad	Represents a load
SimLoadCollection	Provides methods for managing loads CAE::SimLoad in a sim part
iterator	Iterator for accessing the contents of the collection
SimLoadGroup	Represents a load group in a solution or solution step
SimMotionLoadsBuilder	Represents a CAE::SimMotionLoadsBuilder To create a new instance of this class, use CAE::SimSimulation::CreateMotionLoadsBuilder Created in NX5.0.1
SimMotionLoadsListItemBuilder	Represents a CAE::SimMotionLoadsListItemBuilder To create a new instance of this class, use CAE::SimSimulation::CreateMotionLoadsListItemBuilder Created in NX5.0.1
SimPart	Represents an NX part of type .sim
ImportErrorCodes	Contains list of error codes for import of each entity type
ImportOptions	Contains information about which entities to be imported
SimRecipe	This is an abstract class
SimRecipeCollection	Provides methods for managing CAE::SimRecipe in a sim part
iterator	Iterator for accessing the contents of the collection
SimSimulation	This is the root object in a .sim file
SimSimulationObject	Represents a simulation object
SimSimulationObjectCollection	Provides methods for managing simulation objects CAE::SimSimulationObject in a sim part
iterator	Iterator for accessing the contents of the collection
SimSimulationObjectGroup	Represents a simulation object group in a solution or solution step
SimSolution	Represents a solution in the .sim files
SimSolutionCollection	Provides methods for managing Solutions CAE::SimSolution in a CAE::SimSimulation
iterator	Iterator for accessing the contents of the collection
SimSolutionStep	Represents a subcase/step in a solution
SketchCurves	Represents a Beam Cross Section This is an abstract class Created in NX7.5.0
SketchCurvesCollection	Represents the collection of all CAE::SketchCurves in a fem part
iterator	Iterator for accessing the contents of the collection
SliverFaceMethod	Represents the output from the sliver face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
SmartSelectionManager	Provides methods for creating smart selection methods in a cae part
SolidPropertyCheckBuilder	Represents a CAE::SolidPropertyCheckBuilder To create a new instance of this class, use CAE::ModelCheckManager::CreateSolidPropertyCheckBuilder Created in NX5.0.1
SolutionResult	Represents analysis results for a given CAE::SimSolution
SolverAppendOption	This class provides access to the append option setting for importing solver specific data into existing Fem/Sim
SpiderElementBuilder	Represents a CAE::SpiderElementBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateSpiderElementBuilder Created in NX5.0.1
SpringEADBuilder	This class provides Spring Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateSpringEadBuilder CAE::NodeElementManager::CreateSpringEadBuilder @endlink <br> Default values
StandardBeamSection	Represents a Standard Beam Cross Section To create or edit an instance of this class, use CAE::StandardBeamSectionBuilder Created in NX7.5.0
StandardBeamSectionBuilder	Represents a CAE::StandardBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateStandardBeamSectionBuilder Created in NX7.5.0
SuppressHoleBuilder	Builder for creating Hole Suppression Hole <br> To create a new instance of this class, use @link CAE::AbstractionManager::CreateSuppressHoleBuilder CAE::AbstractionManager::CreateSuppressHoleBuilder @endlink <br> Default values
SurfaceCoatBuilder	Builder for creating Surface Coat To create a new instance of this class, use CAE::MeshManager::CreateSurfaceCoatBuilder Created in NX6.0.1
SweepBetweenMeshBuilder	Builder for creating swept mesh between faces
SweptMesh	Represents swept Mesh To create or edit an instance of this class, use CAE::Mesh3dHexBuilder Created in NX6.0.0
TangentContinuousEdgeMethod	Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.1
TangentFaceMethod	Represents the output from the tangent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0
ThicknessBuilder	Represents a CAE::ThicknessBuilder To create a new instance of this class, use CAE::NodeElementInfoManager::CreateThicknessBuilder Created in NX6.0.1
ThicknessPlotContours	Represents a CAE::ThicknessPlotContours object returned from CAE::ThicknessPlotContoursBuilder::CreatePlotObject in CAE::ThicknessPlotContoursBuilder
ThicknessPlotContoursBuilder	Represents a CAE::ThicknessPlotContoursBuilder builder which can be used to generate a plot of a CAE::SimBC in the graphics area
TransientResultsReductionBuilder	Represents a CAE::TransientResultsReductionBuilder To obtain an instance of this class use Session::ResultManager
UnStitchEdgeBuilder	Represents a CAE::UnStitchEdgeBuilder To create a new instance of this class, use CAE::FemPart::CreateUnStitchEdgeBuilder Created in NX6.0.0
UserDefinedSolidBeamSection	Represents a User-Defined Solid Beam Cross Section To create or edit an instance of this class, use CAE::UserDefinedSolidBeamSectionBuilder Created in NX7.5.0
UserDefinedSolidBeamSectionBuilder	Represents a CAE::UserDefinedSolidBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateUserDefinedSolidBeamSectionBuilder Created in NX7.5.0
ViewLaminateBuilder	Represents a View Laminate Builder
WeldBuilder	Represents a CAE::WeldBuilder To create a new instance of this class, use CAE::MeshManager::CreateWeldBuilder Created in NX7.5.2
WeldRow	Represents a CAE weld row
Cam	Provides classes and interfaces for Manufacturing
CamGeneralPropertiesBuilder	Represents a Cam::CamGeneralPropertiesBuilder to be used for setting the name of a specified CAM object
CAM	Provides classes and interfaces for Manufacturing
FBM	Provides classes and interfaces relating to Feature Based Machining
Feature	Interface for CAM Feature objects This is an abstract class, and cannot be instantiated
FeatureSet	Interface for feature set To create a new instance of this class, use CAM::FBM::MachiningFeatureGeometry::CreateFeatureSet Created in NX9.0.0
MachiningFeatureGeometry	Represents a feature geometry builder An instance of this class can be obtained from CAM::HoleBossGeom::GetCenterHoleGeometry or CAM::HoleBossGeom::GetChamferHoleGeometry Created in NX9.0.0
AcrossVoids	Represents a @link CAM::AcrossVoids CAM::AcrossVoids@endlink Created in NX6.0.0
AlongMachineAxisMoveBuilder	Represents Along MCS Axis Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0
AlongMcsAxisMoveBuilder	Represents Along MCS Axis Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0
AlongToolAxisMoveBuilder	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongToolAxisMoveBuilder Created in NX5.0.0
ArcOutputTypeCiBuilder	Represents a ArcOutputTypeCiBuilder Created in NX5.0.0
AreaMillingContainment	Represents a Containment Builder Created in NX9.0.0
AreaMillingNonSteepContainment	Represents a NonSteep Containment Builder Created in NX9.0.0
AreaMillingSteepContainment	Represents a Steep Containment Builder Created in NX9.0.0
BarrelToolBuilder	Represents a BarrelTool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateBarrelToolBuilder Created in NX5.0.0
Blade	Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.0.0
BladeCutLevels	Represents a Blade Cut Levels Builder This is an abstract class and cannot be instantiated
BladeCutStart	Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.5.0
BladeEdge	Represents a BladeEdge Builder Created in NX7.0.0
BladeFinish	Represents a Blade Finish Drive Method Builder Created in NX7.5.0
BladeFinishGeom	Represents BladeFinishGeom Builder Created in NX7.5.0
BladeRough	Represents a Blade Rough Drive Method Builder Created in NX7.0.0
BladeStartPoint	Represents BladeStartPoint Builder Created in NX7.5.0
BlankIpw	Represents the blank ipw builder for blank definition To obtain an instance of this class use the CAM::GeometryGroup Created in NX8.0.0
BlendFinish	Represents a Blend Finish Drive Method Builder Created in NX7.5.0
Boundary	Represents a CAM boundary object Created in NX9.0.0
BoundaryMemberSet	Represents a boundary member set
BoundaryMemberSetList	Represents a list of objects
BoundaryMillingMemberSet	Represents a boundary member set
BoundaryMillingSet	Represents a boundary milling set
BoundarySet	Represents a boundary set
BoundarySetList	Represents a list of objects
CAMAttribute	Represents a CAM Feature Attribute To obtain an instance of this class use CAM::CAMFeature Created in NX8.0.0
CAMAttributeCollection	Represents the CAM Attribute collection To obtain an instance of this class, refer to CAM::CAMFeature Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
CAMFeature	Represents a CAM Feature To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX7.5.0
CAMFeatureCollection	Represents the CAMFeature collection To obtain an instance of this class, refer to BasePart Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
CAMFeatureList	Represents a list of objects
CAMObject	Represents interface for all CAM Object To create or edit an instance of this class, use CAM::ParamBuilder Created in NX4.0.0
ErrorItem	Error Item
CAMSession	Represents cam session To obtain an instance of this class, refer to Session Created in NX4.0.0
CAMSetup	Cam setup To obtain an instance of this class, use Part::CAMSetup Created in NX4.0.0
CavityMilling	Represents a Cavity Milling Operation To create or edit an instance of this class, use CAM::CavityMillingBuilder Created in NX7.5.0
CavityMillingBuilder	Represents a CavityMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateCavityMillingBuilder Created in NX5.0.0
CenterlineDrillTurning	Represents a Centerline Drill Turning operation To create or edit an instance of this class, use CAM::CenterlineDrillTurningBuilder Created in NX7.5.0
CenterlineDrillTurningBuilder	Represents a CenterlineDrillTurningBuilder To create a new instance of this class, use CAM::OperationCollection::CreateCenterlineDrillTurningBuilder Created in NX6.0.0
CenterlineDrillVariableIncrementBuilder	Represents a Turn Avoidance Path Points Builder Created in NX6.0.0
ChipControl	Represents a CAM::ChipControl
CircularAboutAxisMoveBuilder	Represents the Circular Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder Created in NX5.0.0
CleanupOutput	Represents a @link CAM::CleanupOutput CAM::CleanupOutput@endlink Created in NX6.0.0
CleanupSettings	Represents a @link CAM::CleanupSettings CAM::CleanupSettings@endlink Created in NX6.0.0
CollisionConfigurationBuilder	Represents a CAM::CollisionConfigurationBuilder This is an abstract class, and cannot be instantiated
CollisionPairBuilder	Represents a CAM::CollisionPairBuilder To create a new instance of this class, use SIM::KinematicConfigurator::CreateCollisionPairBuilder Created in NX6.0.0
CollisionPairBuilderList	Represents a list of objects
ContourAngle	Represents a CAM::ContourAngle
ConvertFromMCDBuilder	Represents a CAM::ConvertFromMCDBuilder To create a new instance of this class, use SIM::KinematicConfigurator::CreateConvertFromMcdBuilder Created in NX9.0.0
CornerControlBuilder	Represents a FinishPasses Builder Created in NX6.0.0
CustomLoops	Represents a CustomLoops object
CustomLoopSet	Represents a loop set object To create a new instance of this class, use CAM::CustomLoops::CreateLoopSet
CustomLoopSetList	Represents a list of objects
CutAngle	Represents a boundary cut angle ci Builder Created in NX6.0.0
CutBand	Cut Band Builder Created in NX7.5.0
Cutcom	Represents a CAM::Cutcom Created in NX6.0.2
CutDepthChecker	Represents a cut depth checker object This has not creator Created in NX8.5.0
CutDirection	Represents a boundary cut direction ci Builder This builder can not instantiated separately
CutDwell	Represents a CAM::CutDwell
CutLevel	Represents a cut level object for cavity mill and zlevel mill
CutLevelPlanar	Represents a cut level object for planar mill
CutParameters	Represents a CAM::CutParameters
CutPatternBuilder	Represents a Cut Pattern Builder Created in NX6.0.0
CutSides	Represents a Cut Sides Builder Created in NX7.5.0
CutStrategy	Represents cut strategy Created in NX6.0.0
CutVolume	The classs represent the sub builder for creating cut volume feature items To create a new instance of this class, use CAM::CutVolumeGeom::CreateCutVolume Created in NX8.0.0
CutVolumeGeom	The classs represent the builder for creating cut volume features Created in NX8.0.0
CutVolumeList	Represents a list of objects
Cycle	Represets a User Defined Event Created in NX9.0.0
CylinderMillingBuilder	Represents a CylinderMillingBuilder Builder To create a new instance of this class, use CAM::OperationCollection::CreateCylinderMillingBuilder Created in NX8.0.0
CylinderMillingCutParameters	Represents a CylinderMillingCutParameters Builder Created in NX8.0.0
DeltaMoveBuilder	Represents the Delta Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateDeltaMoveBuilder Created in NX5.0.0
DisplayPaint	Represents a display paint Builder This is an abstract class and cannot be instantiated
DisplayPath	Represents a display path Builder This is an abstract class and cannot be instantiated
DisplaySilhouette	Represents a display silhouette Builder This is an abstract class and cannot be instantiated
DisplayTool	Represents a display tool Builder This is an abstract class and cannot be instantiated
DmAmBuilder	Represents a Area Milling Drive Method Builder Created in NX5.0.0
DmBndBuilder	Represents a Boundary Drive Method Builder Created in NX5.0.0
DmCmBuilder	Represents a DmCmBuilder Created in NX5.0.0
DmCmMultiplePassesCiBuilder	Represents a DmCmMultiplePassesCiBuilder To obtain an instance of this class use CAM::DmCmBuilder::DmCmMultiplePassesBuilder Created in NX5.0.0
DmCurveBuilder	Represents a Curve Drive Method Builder Created in NX5.0.0
DmRadBuilder	Represents a DmRadBuilder Builder Created in NX5.0.0
DmRotaryFloorFinishBuilder	Represent rotary floor finish builder Created in NX9.0.0
DmSpiralBuilder	Represents a Spiral Drive Method Builder This is an abstract class and cannot be instantiated
DmSurfBuilder	Represents a DmSurfBuilder Created in NX5.0.0
DmTpBuilder	Represents a tool path Drive Method Builder This is an abstract class and cannot be instantiated
DmUserExitCiBuilder	Represents a exit name ci Builder Created in NX5.0.0
DoubleIntentData	The data for CamUI_DoubleIntentComp Created in NX5.0.0
DoubleStatusData	The data for CamUI_DoubleStatusComp Created in NX5.0.0
DPMItpBuilder	Represents an DPMItp Builder To create a new instance of this class, use CAM::OperationCollection::CreateDpmitpBuilder Created in NX5.0.0
DrillBackSpotfacingToolBuilder	Represents a drill back spotfacing Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBackSpotfacingToolBuilder Created in NX5.0.0
DrillBoreToolBuilder	Represents a drill bore Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBoreToolBuilder Created in NX5.0.0
DrillBurnishingToolBuilder	Represents a drill burnishing Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBurnishingToolBuilder Created in NX5.0.0
DrillCenterBellToolBuilder	Represents a Drill Center Bell Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCenterBellToolBuilder Created in NX5.0.0
DrillCoreToolBuilder	Represents a drill core Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCoreToolBuilder Created in NX9.0.0
DrillCounterboreToolBuilder	Represents a drill counterbore Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCounterboreToolBuilder Created in NX5.0.0
DrillCtskToolBuilder	Represents a Drill Ctsk Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCtskToolBuilder Created in NX5.0.0
DrillGeomBuilder	Represents a DrillGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillGeomBuilder Created in NX5.0.0
DrillMethodBuilder	Represents a Drill Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillMethodBuilder Created in NX5.0.0
DrillReamerToolBuilder	Represents a drill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillReamerToolBuilder Created in NX5.0.0
DrillSpotdrillToolBuilder	Represents a drill spotdrill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillSpotdrillToolBuilder Created in NX5.0.0
DrillSpotfaceToolBuilder	Represents a drill spotface tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillSpotfaceToolBuilder Created in NX5.0.0
DrillStdToolBuilder	Represents a drill std Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillStdToolBuilder Created in NX5.0.0
DrillStepToolBuilder	Represents a drill step Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillStepToolBuilder Created in NX5.0.0
DrillSurfaceBuilder	Represents a Drill Surface Builder This is an abstract class and cannot be instantiated
DrillTapToolBuilder	Represents a drill tap Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillTapToolBuilder Created in NX5.0.0
DrillThreadMillToolBuilder	Represents a drill thread mill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillThreadMillToolBuilder Created in NX5.0.0
DrillToolBuilder	Represents a drill Tool Builder This is an abstract class, and cannot be instantiated
DriveChainItemBuilder	Represents the Drive Chain Item Builder This cannot be instantiated Created in NX6.0.0
DriveChainItemBuilderList	Represents a list of objects
DriveMode	Drive Mode Builder Created in NX7.5.0
EdgeFinish	Represents a Blade Finish Drive Method Builder Created in NX7.5.0
Engraving	Represents a Engraving Operation To create or edit an instance of this class, use CAM::EngravingBuilder Created in NX7.5.0
EngravingBuilder	Represents a Engraving Builder To create a new instance of this class, use CAM::OperationCollection::CreateEngravingBuilder Created in NX5.0.0
ExtendAtEdges	Represents a @link CAM::ExtendAtEdges CAM::ExtendAtEdges@endlink Created in NX6.0.0
FaceMilling	Represents a Face Milling Operation To create or edit an instance of this class, use CAM::FaceMillingBuilder Created in NX7.5.0
FaceMillingBuilder	Represents a FaceMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateFaceMillingBuilder Created in NX5.0.0
FacesSequence	Represents faces sequence Created in NX6.0.0
FeatureBasedGeomBuilder	Represents a FeatureBasedGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateFeatureBasedGeomBuilder Created in NX5.0.0
FeatureGeomBuilder	Represents a FeatureGeom Builder This is an abstract class, and cannot be instantiated
FeatureGeometry	Represents a Base Geometry Group To create or edit an instance of this class, use CAM::FeatureGeomBuilder Created in NX7.5.0
FeatureGeometryGroup	Represents a CAM Feature Group To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX8.0.0
FeatureMilling	Represents a Feature Milling Operation To create or edit an instance of this class, use CAM::FeatureMillingBuilder Created in NX7.5.0
FeatureMillingBuilder	Represents a FeatureMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateFeatureMillingBuilder Created in NX5.0.0
FeatureProcessBuilder	The Create Feature Process Builder class creates operations and features groups <br> To create a new instance of this class, use @link CAM::CAMSetup::CreateFeatureProcessBuilder CAM::CAMSetup::CreateFeatureProcessBuilder @endlink <br> Default values
FeatureRecognitionBuilder	Represents a FeatureRecognition Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeatureRecognitionBuilder Created in NX6.0.0
FeatureTeaching	Represents a FeatureTeaching Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeatureTeaching Created in NX8.0.0
FeedsBuilder	Represents a feeds Builder Created in NX5.0.0
FeedsOptimizationData	Represents a CAM::FeedsOptimizationData
FeedsOptimizeBuilder	Represents a CAM::FeedsOptimizeBuilder a "commit" of this object will perform the Feed Rate Optimization
FeedStatusData	The data for CamUI_FeedStatusComp Created in NX5.0.0
FeedsTurnBuilder	Represents a turning feeds Builder Created in NX5.0.0
FeedsWedmBuilder	Represents a wedm feeds Builder Created in NX5.0.0
FinishDwell	Represents a CAM::FinishDwell
FinishPassesBuilder	Represents a FinishPasses Builder This is an abstract class, and cannot be instantiated
FinishTurning	Represents a Turn Finishing operation To create or edit an instance of this class, use CAM::FinishTurningBuilder Created in NX7.5.0
FinishTurningBuilder	Represents a FinishTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateFinishTurningBuilder Created in NX6.0.0
FirstPlunge	Represents the first plunge Created in NX6.0.0
FlowBuilder	Represents a FlowBuilder Builder This is an abstract class and cannot be instantiated
FlowCutSteepContainment	Represents a Steep Containment Builder Created in NX7.5.0
FollowCurveMoveBuilder	Represents the Follow Curve Move Builder <br> To create a new instance of this class, use @link CAM::MoveCollection::CreateFollowCurveMoveBuilder CAM::MoveCollection::CreateFollowCurveMoveBuilder @endlink <br> Default values
FollowGeometryMoveBuilder	Represents the Follow Geometry Move Builder This is an abstract class, and cannot be created
FollowPartMoveBuilder	Represents the Follow Part Move Builder <br> To create a new instance of this class, use @link CAM::MoveCollection::CreateFollowPartMoveBuilder CAM::MoveCollection::CreateFollowPartMoveBuilder @endlink <br> Default values
FormEdgesBuilder	Represents a FormEdges Builder Created in NX6.0.0
FormToolBuilder	Represents a Form tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateFormToolBuilder Created in NX5.0.0
GenericMotionControl	Represents a Generic Motion Control operation To create or edit an instance of this class, use CAM::GmcOpBuilder Created in NX7.5.0
GenericToolBuilder	Represents a Generic Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateGenericToolBuilder Created in NX5.0.0
GenericTrackingBuilder	Represents a GenericTracking Builder To create a new instance of this class, use CAM::Tool::CreateGenericTrackingBuilder Created in NX5.0.0
Geometry	Represents a CAM geometry object Created in NX8.0.0
GeometryCiBuilder	Represents a geometry ci Builder Created in NX5.0.0
GeometryGroup	Represents a CAM geometry builder for group level Created in NX8.0.0
GeometrySet	Represents a geometry set for a CAM object
GeometrySetList	Represents a list of objects
GmcOpBuilder	Represents a GmcOp Builder To create a new instance of this class, use CAM::OperationCollection::CreateGmcopBuilder Created in NX5.0.0
GrooveMilling	Represents a Groove Milling Operation To create or edit an instance of this class, use CAM::GrooveMillingBuilder Created in NX9.0.0
GrooveMillingBuilder	Represents a GrooveMillingBuilder To create a new instance of this class, use CAM::OperationCollection::CreateGrooveMillingBuilder Created in NX9.0.0
GrooveToolBuilder	Represents a Groove tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateGrooveToolBuilder Created in NX5.0.0
GroupFeatures	Represents the group features command <br> To create a new instance of this class, use @link CAM::NCGroupCollection::CreateGroupFeatures CAM::NCGroupCollection::CreateGroupFeatures @endlink <br> Default values
HolderSectionBuilder	Represents a Holder Section Builder Created in NX5.0.0
HoldingSystemBuilder	Represents a CAM::HoldingSystemBuilder This is an abstract class, and cannot be instantiated
HoldingSystemBuilderList	Represents a list of objects
HoleBossGeom	Represents a CAM geometry builder This is an abstract class and cannot be instantiated
HoleBossGeometry	Represents a CAM geometry builder To create a new instance of this class, use CAM::NCGroupCollection::CreateHoleBossGeometryBuilder Created in NX7.5.0
HoleBossSet	Represents a Cut Area Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateHoleBossBuilder Created in NX7.5.0
HoleBossSetList	Represents a list of objects
HoleDrillingBuilder	Represents a HoleDrillingBuilder Builder To create a new instance of this class, use CAM::OperationCollection::CreateHoleDrillingBuilder Created in NX9.0.0
HoleDrillingCutParameters	Represents a HoleDrillingCutParameters Builder Created in NX9.0.0
HoleMachiningBuilder	Represents a HoleMachiningBuilder Builder This is an abstract class and cannot be instantiated
HoleMachiningCutParameters	Represents a HoleMachiningCutParameters Builder This is an abstract class and cannot be instantiated
HoleMaking	Represents a Hole Making operation To create or edit an instance of this class, use CAM::HoleMakingBuilder Created in NX7.5.0
HoleMakingBuilder	Represents a HoleMaking Builder To create a new instance of this class, use CAM::OperationCollection::CreateHoleMakingBuilder Created in NX5.0.0
HubFinish	Represents a Hub Finish Drive Method Builder Created in NX7.5.0
InferredDouble	Represents a builder for an inferred value in of a CAM.CAMObject Created in NX7.5.0
Inheritable2dLength	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0
InheritableBuilder	Represents a builder for an inheritable value in of a CAM.CAMObject Created in NX6.0.0
InheritableDoubleBuilder	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0
InheritableFeedBuilder	Represents a builder for an inheritable feed value in of a CAM.CAMObject Created in NX5.0.0
InheritableFeedModeBuilder	Represents a builder for an inheritable enum value in of a CAM.CAMObject Created in NX8.0.0
InheritableIntBuilder	Represents a builder for an inheritable integer value in of a CAM.CAMObject Created in NX5.0.0
InheritableTextBuilder	Represents a builder for an inheritable text value in of a CAM.CAMObject Created in NX5.0.0
InheritableToolDepBuilder	Represents a builder for an inheritable tool dependent value in of a CAM.CAMObject Created in NX5.0.0
InitialProfilePlunge	Represents the initial profile plunge Created in NX7.5.0
InPathEventDataBuilder	Represents a InPath Event Data Builder To create a new instance of this class, use CAM::WedmCustomBoundaryDataBuilder::CreateInpathEventDataBuilder Created in NX5.0.0
InPathEventDataBuilderList	Represents a list of objects
InPathEventSetData	Represents in path event This is a sub-builder class and cannot be directly instantiated Created in NX7.5.0
InspectionAlignmentBuilder	Represents a CMM Inspection Alignment builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAlignmentBuilder Created in NX7.5.2
InspectionAnalyzeBuilder	Inspection Analyze options dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAnalyzeBuilder Created in NX8.5.0
InspectionAnalyzeOutputBuilder	Inspection Analyze Output options dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAnalyzeOutputBuilder Created in NX8.5.1
InspectionArcFeatureBuilder	Represents a CMM Inspection Arc Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionArcFeatureBuilder Created in NX7.0.0
InspectionAxisExtrapolationModeBuilder	Represents a builder for an inheritable axis extrapolation mode enum value Created in NX8.5.1
InspectionCircleFeatureBuilder	Represents a CMM Inspection Circle Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCircleFeatureBuilder Created in NX7.0.0
InspectionCmmCommandBuilder	Represents a CMM Inspection miscellaneous command builder
InspectionCollisionAvoidanceBuilder	Collision Avoidance Dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCollisionAvoidanceBuilder Created in NX8.0.0
InspectionConeFeatureBuilder	Represents a CMM Inspection Cone Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionConeFeatureBuilder Created in NX7.0.0
InspectionConstructedFeatureBuilder	Represents a CMM Inspection Constructed Feature Builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionConstructedFeatureBuilder Created in NX7.0.0
InspectionCparlnFeatureBuilder	Represents a CMM Inspection Cparln Feature Builder
InspectionCreatePathsBuilder	Create Paths Dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCreatePathsBuilder Created in NX7.0.0
InspectionCurveFeatureBuilder	Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCurveFeatureBuilder Created in NX7.0.0
InspectionCylinderCircleFitModeBuilder	Represents a builder for an inheritable cylinder/circle fitting mode enum value Created in NX8.5.1
InspectionCylinderFeatureBuilder	Represents a CMM Inspection Cylinder Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCylinderFeatureBuilder Created in NX7.0.0
InspectionDatumPlaneFittingModeBuilder	Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1
InspectionDeltaMoveBuilder	Represents the builder for the CMM Inspection sub-operation Delta Move
InspectionEdgePointFeatureBuilder	Represents a CMM Inspection Edge Point Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionEdgePointFeatureBuilder Created in NX9.0.0
InspectionGroup	Represents a group for CMM Inspection To obtain an instance of this class us CAM::InspectionGroupCollection Created in NX7.0.0
InspectionGroupCollection	Represents the group collection for CMM Inspection To obtain an instance of this class, refer to CAM::InspectionSetup Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
InspectionLimitsOfSizeModeBuilder	Represents a builder for an inheritable limits of size mode enum value Created in NX8.5.1
InspectionLinear5axisMoveToPointBuilder	Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point
InspectionLinearMoveToPointBuilder	Represents the builder for the CMM Inspection sub-operation Linear Move To Point
InspectionLineFeatureBuilder	Represents a CMM Inspection Line Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionLineFeatureBuilder Created in NX7.0.0
InspectionLinkPmiBuilder	Create Link PMI Dialog Builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionLinkPmiBuilder Created in NX7.0.0
InspectionMeasDataBuilder	Inspection Measured Data dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionMeasDataBuilder Created in NX8.5.0
InspectionMeasurePointBuilder	Represents the builder for the CMM Inspection sub-operation Measure Point
InspectionMethodBuilder	Represents the builder for a CMM Inspection method
InspectionMoveBuilder	Represents CMM Inspection Move Builder This cannot be instantiated Created in NX7.0.0
InspectionMoveCollection	Represents the Inspection move collection To obtain an instance of this class, refer to CAM::InspectionOperation Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
InspectionMoveSubop	Represents CMM Inspection Move To obtain an instance of this class use CAM::InspectionMoveCollection Created in NX7.0.0
InspectionMoveSubopCollection	Represents the Inspection move collection contained by point set subops To obtain an instance of this class, refer to CAM::InspectionMoveSubop Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
InspectionOperation	Represents an Inspection operation To obtain an instance of this class use CAM::InspectionOperationCollection Created in NX7.0.0
InspectionOperationCollection	Represents the CMM Inspection operation collection To obtain an instance of this class, refer to CAM::InspectionSetup Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
InspectionOutputOperationBuilder	This class creates the output operation To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionOutputOperationBuilder Created in NX7.0.0
InspectionParplnFeatureBuilder	Represents a CMM Inspection Parpln Feature Builder
InspectionPathBuilder	Represents the builder for a CMM Inspection path
InspectionPathPointBuilder	Represents an inspection path point builder Created in NX8.5.0
InspectionPatternFeatureBuilder	Represents a CMM Inspection Pattern Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPatternFeatureBuilder Created in NX7.0.0
InspectionPlaneFeatureBuilder	Represents a CMM Inspection Plane Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPlaneFeatureBuilder Created in NX7.0.0
InspectionPointFeatureBuilder	Represents a CMM Inspection Point Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPointFeatureBuilder Created in NX7.0.0
InspectionProbeToolBuilder	Represents an Inspection Probe Tool Builder To create a new instance of this class, use CAM::InspectionGroupCollection::CreateInspectionProbeToolBuilder Created in NX9.0.0
InspectionProbeTrackingBuilder	Represents a InspectionProbeTracking builder To create a new instance of this class, use CAM::InspectionTool::CreateInspectionProbeTrackingBuilder Created in NX9.0.0
InspectionProfileDispositionModeBuilder	Represents a builder for an inheritable profile disposition mode enum value Created in NX8.5.1
InspectionReferenceFeatureModeBuilder	Represents a builder for an inheritable reference feature mode enum value Created in NX9.0.0
InspectionScanArcBuilder	Represents the builder for the CMM Inspection sub-operation Scan Arc
InspectionScanCurve5AxisBuilder	Represents the builder for the CMM Inspection sub-operation Scan Curve
InspectionScanCurveBuilder	Represents the builder for the CMM Inspection sub-operation Scan Curve
InspectionScanHelixBuilder	Represents the builder for the CMM Inspection sub-operation Scan Helix
InspectionScanLineBuilder	Represents the builder for the CMM Inspection sub-operation Scan Line
InspectionSensorBuilder	Represents the builder for a CMM Inspection Sensor
InspectionSensorMassEditBuilder	Edit Multiple Subops Dialog builder To create a new instance of this class, use CAM::InspectionMoveCollection::CreateInspectionSensorMassEditBuilder Created in NX7.5.3
InspectionSensorStrategyBuilder	Represents a builder for an inheritable sensor strategy enum value Created in NX9.0.0
InspectionSetup	Inspection setup Use the Part class to get or create an inspection setup Created in NX7.0.0
InspectionSphereFeatureBuilder	Represents a CMM inspection sphere feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionSphereFeatureBuilder Created in NX7.0.0
InspectionSurfaceFeatureBuilder	Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionSurfaceFeatureBuilder Created in NX7.0.0
InspectionSurfaceProfileModeBuilder	Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1
InspectionToleranceOperationBuilder	This class creates the tolerance operation To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionToleranceOperationBuilder Created in NX7.0.0
InspectionTool	Represents an Inspection group To obtain an instance of this class use CAM::InspectionGroupCollection Created in NX7.0.0
InspectionTorusFeatureBuilder	Represents a CMM Inspection Torus Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionTorusFeatureBuilder Created in NX7.0.0
InspectionTrackPointCollection	Represents the inspection track point collection To obtain an instance of this class, refer to CAM::InspectionTool Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
InspectionUVGridBuilder	Represents the builder for the CMM Inspection UV Grid sub-operation
InterpolateAngle	Represents builder of Interpolate Angle, one option of Tool Axis Created in NX7.5.0
InterpolateVector	Represents builder of Interpolate Vector, one option of Tool Axis Created in NX7.5.0
IntStatusData	The data for CamUI_IntStatusComp Created in NX5.0.0
IpwAnalysisBuilder	Represents a CAM::IpwAnalysisBuilder This is an abstract class, and cannot be instantiated
IpwContainmentCurvesBuilder	Represents a CAM::IpwContainmentCurvesBuilder This is an abstract class, and cannot be instantiated
LaserCircleCutout	Represents a LaserCircleCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserCircleCutout Created in NX9.0.0
LaserControlPoint	Represents a Laser Control Point builder To create a new instance of this class, use CAM::LaserProfileMove::CreateControlPoint Created in NX9.0.0
LaserControlPointList	Represents a list of objects
LaserCutDirection	Represents cut direction settings for laser move Created in NX9.0.0
LaserCutoutDefinition	Represents cutout definition settings for laser move Created in NX9.0.0
LaserHeadOrientation	Represents head orientation settings for laser sub move Created in NX9.0.0
LaserHexagonCutout	Represents a LaserHexagonCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserHexagonCutout Created in NX9.0.0
LaserLinearMove	Represents a LaserLinearMove To create a new instance of this class, use CAM::MoveCollection::CreateLaserLinearMove Created in NX9.0.0
LaserMethod	Represents a Laser Method To create a new instance of this class, use CAM::NCGroupCollection::CreateLaserMethod Created in NX9.0.0
LaserPiercingPoint	Represents piercing point settings for laser move Created in NX9.0.0
LaserProfileMove	Represents a LaserProfileMove To create a new instance of this class, use CAM::MoveCollection::CreateLaserProfileMove Created in NX9.0.0
LaserRectangleCutout	Represents a LaserRectangleCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserRectangleCutout Created in NX9.0.0
LaserSlotCutout	Represents a LaserSlotCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserSlotCutout Created in NX9.0.0
LaserTeachMode	Represents a Laser TeachMode To create a new instance of this class, use CAM::OperationCollection::CreateLaserTeachMode Created in NX9.0.0
LaserTool	Represents a Laser Tool To create a new instance of this class, use CAM::NCGroupCollection::CreateLaserTool Created in NX9.0.0
LatheMachineControl	Represents a Lathe Machine Control operation To create or edit an instance of this class, use CAM::LatheMachineControlBuilder Created in NX7.5.0
LatheMachineControlBuilder	Represents a LatheMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateLatheMachineControlBuilder Created in NX5.0.0
LatheUserDefined	Represents a Lathe User Defined operation To create or edit an instance of this class, use CAM::LatheUserDefinedBuilder Created in NX7.5.0
LatheUserDefinedBuilder	Represents a LatheUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateLatheUserDefinedBuilder Created in NX5.0.0
LayoutCiBuilder	Represents a layout ci Builder Created in NX5.0.0
LeadAngles	Represents a lead angles Created in NX8.5.0
LevelToLevel	Represents a @link CAM::LevelToLevel CAM::LevelToLevel@endlink Created in NX6.0.0
LowerLimit	Represents a CAM::LowerLimit
MachineGroupBuilder	Represents a MachineGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineGroupBuilder Created in NX5.0.0
MachineHeadGroupBuilder	Represents a MachineHeadGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineHeadGroupBuilder Created in NX5.0.0
MachinePocketGroupBuilder	Represents a MachinePocketGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachinePocketGroupBuilder Created in NX5.0.0
MachineTurretGroupBuilder	Represents a MachineTurretGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineTurretGroupBuilder Created in NX5.0.0
MachiningFeature	Represents a CAM::CAMFeature builder To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX8.0.0
MachiningFeatureGeom	This class represent the builder for machining feature geometry
ManageToolPartBuilder	Represents an Export Tool Part Builder This is an abstract class, and cannot be instantiated
ManualFeatureBuilder	Represents a CAM::ManualFeatureBuilder To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX6.0.0
ManualFeatureBuilderList	Represents a list of objects
ManualMove	Represents Manual Move To obtain an instance of this class us CAM::OperationCollection Created in NX4.0.0
MaxCutTraverse	Represents a CAM::MaxCutTraverse
Method	Represents a Method Group To create or edit an instance of this class, use CAM::MethodBuilder Created in NX7.5.0
MethodBuilder	Represents a Method Builder This is an abstract class, and cannot be instantiated
MillAreaGeomBuilder	Represents a MillAreaGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillAreaGeomBuilder Created in NX5.0.0
MillBoundaryGeomBuilder	Represents a MillBoundaryGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillBoundaryGeomBuilder Created in NX5.0.0
MillCutParameters	Represents a CAM::MillCutParameters
MillFormToolBuilder	Represents a MillForm Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillFormToolBuilder Created in NX5.0.0
MillGeomBuilder	Represents a MillGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillGeomBuilder Created in NX5.0.0
MillingToolBuilder	Represents a MillingTool Builder This is an abstract class, and cannot be instantiated
MillingTrackpointBuilder	Represents a Milling Trackpoint Builder Created in NX6.0.0
MillMachineControl	Represents a Mill Machine Control operation To create or edit an instance of this class, use CAM::MillMachineControlBuilder Created in NX7.5.0
MillMachineControlBuilder	Represents a MillMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillMachineControlBuilder Created in NX5.0.0
MillMethodBuilder	Represents a Mill Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillMethodBuilder Created in NX5.0.0
MillOperation	Represents a Mill operation To create or edit an instance of this class, use CAM::MillOperationBuilder Created in NX7.5.0
MillOperationBuilder	Represents a MillOperation Builder This is an abstract class and cannot be instantiated
MillOrientGeomBuilder	Represents a MillOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillOrientGeomBuilder Created in NX5.0.0
MillTextGeomBuilder	Represents a MillTextGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillTextGeomBuilder Created in NX5.0.0
MillToolBuilder	Represents a Mill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillToolBuilder Created in NX5.0.0
MillToolProbing	Represents a Mill Tool operation To create or edit an instance of this class, use CAM::MillToolProbingBuilder Created in NX8.5.1
MillToolProbingBuilder	Represents a Mill Tool Probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillToolProbingBuilder Created in NX8.5.1
MillUserDefined	Represents a Mill User Defined operation To create or edit an instance of this class, use CAM::MillUserDefinedBuilder Created in NX7.5.0
MillUserDefinedBuilder	Represents a MillUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillUserDefinedBuilder Created in NX5.0.0
MillVolumeGeomBuilder	Represents a MillVolumeGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillVolumeGeomBuilder Created in NX5.0.0
MinCutDepth	Represents a CAM::MinCutDepth
MinCutLength	Represents a CAM::MinCutLength
MinCutVolume	Represents a CAM::MinCutVolume
Move	Represents a Move To obtain an instance of this class use CAM::MoveCollection Created in NX5.0.0
MoveBuilder	Represents Move Builder This cannot be instantiated Created in NX5.0.0
MoveCollection	Represents the move collection To obtain an instance of this class, refer to CAM::Operation Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
MoveToPointBuilder	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateMoveToPointBuilder Created in NX5.0.0
MultiBladeBaseGeometry	Represents a selectoin geometry Builder This is an abstract class and cannot be instantiated
MultiBladeGeomBuilder	Represents a MultiBladeGeomBuilder Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMultiBladeGeometryBuilder Created in NX7.0.0
MultiBladeSplittersGeometry	Represents a selectoin list geometry Builder This is an abstract class and cannot be instantiated
MultiDepthCut	Represents a @link CAM::MultiDepthCut CAM::MultiDepthCut@endlink Created in NX6.0.0
MultiplePassesBuilder	Represents a MultiplePassesBuilder Created in NX6.0.0
MultipleStepoverBuilder	Represents a Builder which holds the data for a set of individual number of passes and stepover distance
MultiRamp	Represents a CAM::MultiRamp
NCAssistantBuilder	Represents a NCAssistant Builder <br> To create a new instance of this class, use @link CAM::CAMSetup::CreateNCAssistantBuilder CAM::CAMSetup::CreateNCAssistantBuilder @endlink <br> Default values
NCGroup	Represents a NC group To obtain an instance of this class us CAM::NCGroupCollection Created in NX4.0.0
NCGroupBuilder	Represents a NCGroup Builder This is an abstract class, and cannot be instantiated
NCGroupCollection	Represents the ncgroup collection To obtain an instance of this class, refer to CAM::CAMSetup Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
NcmAvoidancePointBuilder	Represents a CAM::NcmAvoidancePointBuilder
NcmClearanceBuilder	Represents a CAM::NcmClearanceBuilder
NcmctPartMountingBuilder	Represents a CAM::NcmctPartMountingBuilder a "commit" of this object will perform the Part Mounting and no object is returned
NcmHoleDrilling	Represents a CAM::NcmHoleDrilling
NcmHoleMachining	Represents a CAM::NcmHoleMachining
NcmHoleMachiningEngRet	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0
NcmLaserEngage	Represents Engage settings for laser non cutting moves Created in NX9.0.0
NcmLaserRetract	Represents Retract settings for laser non cutting moves Created in NX9.0.0
NcmPlanarBuilder	Represents a CAM::NcmPlanarBuilder
NcmPlanarEngRetBuilder	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0
NcmScBuilder	Represents a CAM::NcmScBuilder
NcmScEngRetBuilder	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0
NcmSmoothingBuilder	Represents a CAM::NcmSmoothingBuilder
NcmSubopBuilder	Represents a CAM::NcmSubopBuilder
NcmTransfer	Represents a CAM::NcmTransfer
NcmTransferBuilder	Represents a CAM::NcmTransferBuilder
NcmTurningBuilder	Represents a CAM.NcmTurningBuilder Created in NX6.0.0
NcmTurnRoughBuilder	Represents a CAM.NcmTurnRoughBuilder Created in NX6.0.0
NcmTurnRoughFinishBuilder	Represents a CAM.NcmTurnRoughFinishBuilder Created in NX6.0.0
NcmTurnThreadBuilder	Represents a CAM.NcmTurnThreadBuilder Created in NX6.0.0
NcmWedmBuilder	Represents a CAM.NcmWedmBuilder Created in NX7.5.0
NormalToToolAxisMoveBuilder	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateNormalToToolAxisMoveBuilder Created in NX5.0.0
Notes	Represents notes Created in NX9.0.0
ObjectNotes	Represents an Object Notes To create a new instance of this class, use CAM::CAMSetup::CreateObjectNotes Created in NX9.0.0
ObjectsFeedsBuilder	Represents an Object Action Feeds Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeedsBuilder Created in NX6.0.0
ObjectsUdeSet	Represents an Object Action Ude Set Builder To create a new instance of this class, use CAM::CAMSetup::CreateObjectsUdeSet Created in NX6.0.0
OffsetDataBuilder	Represents the Offset Point Data Builder Created in NX6.0.0
Operation	Represents an operation To create or edit an instance of this class, use CAM::OperationBuilder Created in NX4.0.0
OperationBuilder	Represents a Opr Builder This is an abstract class, and cannot be instantiated
OperationCollection	Represents the operation collection To obtain an instance of this class, refer to CAM::CAMSetup Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
OperationDisplayOptionsBuilder	Represents a display options Builder This is an abstract class and cannot be instantiated
OperationTeaching	Represents a OperationTeaching Builder To create a new instance of this class, use CAM::CAMSetup::CreateOperationTeaching Created in NX8.0.0
OperationTransformBuilder	OperationTransformBuilder To create a new instance of this class, use CAM::CAMSetup::CreateOperationTransformBuilder Created in NX6.0.0
OppositeDirection	Represents OppositeDirection Created in NX8.5.0
OptimizeTraverseGroupBuilder	Represents a OptimizeTraverseGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateOptimizeTraverseGroupBuilder Created in NX5.0.0
OrientGeomBuilder	Represents a OrientGeom Builder This is an abstract class, and cannot be instantiated
OrientGeometry	Represents a Orient Group To create or edit an instance of this class, use CAM::OrientGeomBuilder Created in NX7.5.0
OutputUncutRegions	Represents a CAM::OutputUncutRegions
ParamBuilder	Represents a manufacturing object builder
PartAxisBuilder	Represents a part axis builder
PathDisplayColors	Represents a path display colors Builder This is an abstract class and cannot be instantiated
PitchSetting	Represents a CAM::PitchSetting
PlanarMilling	Represents a Planar Milling Operation To create or edit an instance of this class, use CAM::PlanarMillingBuilder Created in NX7.5.0
PlanarMillingBuilder	Represents a PlanarMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreatePlanarMillingBuilder Created in NX5.0.0
PlanarOperation	Represents a Planar operation To create or edit an instance of this class, use CAM::PlanarOperationBuilder Created in NX7.5.0
PlanarOperationBuilder	Represents a PlanarOperation Builder This is an abstract class and cannot be instantiated
PlungeMilling	Represents a Plunge Milling Operation To create or edit an instance of this class, use CAM::PlungeMillingBuilder Created in NX7.5.0
PlungeMillingBuilder	Represents a PlungeMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreatePlungeMillingBuilder Created in NX5.0.0
PmopToolAxisCiBuilder	Represents a PmopToolAxisCiBuilder This is an abstract class, and cannot be instantiated
PointToPointBuilder	Represents a Point to Point Builder (Drilling) To create a new instance of this class, use CAM::OperationCollection::CreatePointToPointBuilder Created in NX5.0.0
PostEventsCiBuilder	Represents a PostEventsCiBuilder Created in NX5.0.1
Preferences	Represents a cam preferences Builder To create a new instance of this class, use CAM::CAMSession::CreateCamPreferences Created in NX7.5.0
PreprocessGeometryBuilder	Represents a Preprocess Geometry Builder To create a new instance of this class, use CAM::CAMSetup::CreatePreprocessGeometryBuilder Created in NX6.0.0
ProbeCalibrateLengthMoveBuilder	Represents the Probe Calibrate Length Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateLengthMoveBuilder Created in NX5.0.0
ProbeCalibrateSphereMoveBuilder	Represents the Probe Calibrate Sphere Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateSphereMoveBuilder Created in NX5.0.0
ProbeCalibrateStylusMoveBuilder	Represents the Probe Calibrate Stylus Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateStylusMoveBuilder Created in NX5.0.0
ProbeClearanceMoveBuilder	Represents the Probe Clearance Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeClearanceMoveBuilder Created in NX5.0.0
ProbeControlParametersBuilder	Represents a CAM::ProbeControlParametersBuilder
ProbeInspectBorebossMoveBuilder	Represents the Probe Inspect Bore Boss Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectBorebossMoveBuilder Created in NX5.0.0
ProbeInspectPointMoveBuilder	Represents the Probe Inspect Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectPointMoveBuilder Created in NX5.0.0
ProbeInspectSurfacePointMoveBuilder	Represents the Probe Inspect Surface Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectSurfacePointMoveBuilder Created in NX5.0.0
ProbeParamsBuilder	Represents the Probe Params Builder This builder cannot be instantiated separately
ProbeProtectedParametersBuilder	Represents the Probe Protected Parameters Builder Created in NX5.0.0
ProbeStockParametersBuilder	Represents the Probe Stock Parameters Builder Created in NX5.0.0
ProbeToleranceParametersBuilder	Represents a CAM::ProbeToleranceParametersBuilder
ProbeToolBuilder	Represents a Probe Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateProbeToolBuilder Created in NX5.0.0
ProbeTrackingBuilder	Represents a ProbeTracking Builder To create a new instance of this class, use CAM::Tool::CreateProbeTrackingBuilder Created in NX5.0.0
ProbeTrackPoint	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0
ProfileStrategy	Represents profile strategy Created in NX6.0.0
ProgramOrderGroupBuilder	Represents a ProgramOrderGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateProgramOrderGroupBuilder Created in NX5.0.0
ProjVecCiBuilder	Represents a tool axis ci Builder Created in NX5.0.0
RampingMode	Represents a ramping mode Builder Created in NX6.0.0
ReliefCut	Represents the relief cut Created in NX7.5.0
ReliefPlunge	Represents a CAM::ReliefPlunge
RotaryFinishGeomBuilder	Represents a rotary finish geometry builder
RotaryPointMoveBuilder	Rotary Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotaryPointMoveBuilder Created in NX5.0.0
RotaryPolarMoveBuilder	Represents the Rotary Polar Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotaryPolarMoveBuilder Created in NX5.0.0
RotateToolMoveBuilder	Represents the Rotate Tool Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotateToolMoveBuilder Created in NX5.0.0
RoughFinishTurning	Represents a Turn Rough Finish operation To create or edit an instance of this class, use CAM::RoughFinishTurningBuilder Created in NX7.5.0
RoughFinishTurningBuilder	Represents a RoughFinishTurning Builder This is an abstract class and cannot be instantiated
RoughTurning	Represents a Turn Rough operation To create or edit an instance of this class, use CAM::RoughTurningBuilder Created in NX7.5.0
RoughTurningBuilder	Represents a RoughTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateRoughTurningBuilder Created in NX6.0.0
RoundPointBuilder	Represents the round Point Builder Created in NX5.0.0
SelectCAMFeature	Represents a single object selection
SelectCAMFeatureList	Represents a list of objects on a selection list
Sequence	Represents Sequence Builder Created in NX7.5.0
SmallAreaAvoidance	Represents a SmallArea Builder Created in NX6.0.0
SoftTool	Represents a SoftTool This is an abstract class, and cannot be instantiated
SolidToolBuilder	Represents a SolidTool Builder This is an abstract class, and cannot be instantiated
SolidTrackingBuilder	Represents a SolidTracking Builder To create a new instance of this class, use CAM::Tool::CreateSolidTrackingBuilder Created in NX5.0.0
SolidTrackPoint	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0
Splitter	Represents a Splitter Builder To create a new instance of this class, use CAM::MultiBladeSplittersGeometry::CreateSplitter Created in NX7.0.0
SplitterList	Represents a list of objects
SpringPasses	Represents a spring passes Created in NX6.0.0
SpunOutlineGeom	Represents a spun outline geometry object for turning boundary Created in NX8.0.0
SteepContainment	Represents a CAM::SteepContainment
StepoverBuilder	Represents a Stepover Builder Created in NX6.0.0
StepParamsBuilder	Represents a StepParams Builder Created in NX5.0.0
StepUpBuilder	Represents a StepUp Builder Created in NX6.0.0
StockPerPassBuilder	Represents a Builder which holds the data for a set of individual stock per pass
StopPosition	Represents a stop position Created in NX6.0.0
SurfaceContour	Represents a Surface Contour operation To create or edit an instance of this class, use CAM::SurfaceContourBuilder Created in NX7.5.0
SurfaceContourBuilder	Represents a SurfaceContour Builder To create a new instance of this class, use CAM::OperationCollection::CreateSurfaceContourBuilder Created in NX5.0.0
SurfaceDriveGeometry	Represents a CAM drive geometry object for surface area Created in NX8.0.0
SurfaceDriveGeometrySet	Represents a geometry set for a CAM object
SurfaceDriveGeometrySetList	Represents a list of objects
SurfaceRegions	Represents a Surface Regions Builder To create a new instance of this class, use CAM::CAMSetup::CreateSurfaceRegions Created in NX8.0.0
TabPointDataBuilder	Represents a Tab Point Builder To create a new instance of this class, use CAM::WedmCustomBoundaryDataBuilder::CreateTabPointDataBuilder Created in NX5.0.0
TabPointDataBuilderList	Represents a list of objects
TeachmodeEngageSettingsBuilder	Represents a TeachmodeEngageSettingsBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0
TeachmodeLinearMoveBuilder	Represents a TeachmodeLinearMove To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0
TeachmodeProfileMoveBuilder	Represents a TeachmodeProfileMoveBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0
TeachmodeRetractSettingsBuilder	Represents a TeachmodeRetractSettings builder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0
TeachmodeTurning	Represents a Turning Teachmode operation To create or edit an instance of this class, use CAM::TeachmodeTurningBuilder Created in NX7.5.0
TeachmodeTurningBuilder	Represents a TeachmodeTurningBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0
ThreadCutParameters	Represents a CAM::ThreadCutParameters
ThreadedBossSet	Represents a thread boss Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateThreadedBossBuilder Created in NX7.5.0
ThreadedBossSetList	Represents a list of objects
ThreadedHoleSet	Represents a Cut Area Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateThreadedHoleBuilder Created in NX7.5.0
ThreadedHoleSetList	Represents a list of objects
ThreadMilling	Represents a Thread Milling Operation To create or edit an instance of this class, use CAM::ThreadMillingBuilder Created in NX7.5.0
ThreadMillingBuilder	Represents a ThreadMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateThreadMillingBuilder Created in NX7.5.0
ThreadMillingCutParameters	Represents a ThreadMillingCutParameters Builder Created in NX7.5.0
ThreadToolBuilder	Represents a Thread tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateThreadToolBuilder Created in NX5.0.0
ThreadTurning	Represents a Thread Turning operation To create or edit an instance of this class, use CAM::ThreadTurningBuilder Created in NX7.5.0
ThreadTurningBuilder	Represents a ThreadTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateThreadTurningBuilder Created in NX6.0.0
Tool	Represents a NC group To obtain an instance of this class use CAM::NCGroupCollection Created in NX5.0.0
ToolAxisAdvanced	Represents a Tool Axis Advanced Builder Created in NX7.0.0
ToolAxisBase	Represents a tool axis ci Builder Created in NX7.5.0
ToolAxisChange	Represents a CAM::ToolAxisChange
ToolAxisCiBuilder	Represents a tool axis ci Builder Created in NX5.0.0
ToolAxisFixed	Represents a Tool Axis Fixed Builder Created in NX7.5.0
ToolAxisInterpolate	Represents a Tool Axis Interpolate Builder Created in NX7.5.0
ToolAxisTilt	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX6.0.0
ToolAxisVariable	Represents a Tool Axis Variable Builder Created in NX7.5.0
ToolBuilder	Represents a Tool Builder This is an abstract class, and cannot be instantiated
ToolChangeCiBuilder	Represents a ToolChangeCiBuilder Created in NX5.0.0
ToolPathDivideBuilder	Represents a Tool Path Divide Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathDivideBuilder Created in NX5.0.0
ToolPathEditorBuilder	Represents a Tool Path Editor Builder <br> To create a new instance of this class, use @link CAM::Operation::CreateToolPathEditorBuilder CAM::Operation::CreateToolPathEditorBuilder @endlink <br> Default values
ToolPathSplitBuilder	Represents a Tool Path Split Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathSplitBuilder Created in NX6.0.0
ToolPathSplitItemBuilder	Represents a ToolPathSplitItem builder Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object
ToolPathSplitItemBuilderList	Represents a list of objects
ToolPathSplitParametersBuilder	Represents the Divide Parameters This object is owned by another builder
ToolPathTiltAvoidance	Represents a Tool Path Tilt Avoidance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
ToolPathTiltBuilder	Represents a Tool Path Tilt Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathTiltBuilder Created in NX7.5.2
ToolPathTiltClearance	Represents a Tool Path Tilt Clearance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
ToolPathTiltMachine	Represents a Tool Path Tilt Machine Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
ToolPathTiltTilting	Represents a Tool Path Tilt Tilting Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
ToolPositioningBuilder	Represents the Tool Positioning Builder Created in NX8.0.0
ToolTrackingPointBuilder	Represents the Tool Tracking Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateToolTrackingPointBuilder Created in NX8.5.1
Topology	Represents a CAM topology builder Use the CAM::Geometry class to get a topology builder Created in NX8.0.0
TrackingBuilder	Represents a Tracking Builder Created in NX5.0.0
TrackPoint	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0
TrackpointBuilder	Represents a Trackpoint Builder This is an abstract class and can not be instantiated Created in NX5.0.0
TrackPointCollection	Represents the track point collection To obtain an instance of this class, refer to CAM::Tool Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
TrimPlane	Represents Trim Plane Created in NX6.0.0
TrimPoint	Represents trim point Created in NX6.0.0
TrochoidalSettings	Represents a @link CAM::TrochoidalSettings CAM::TrochoidalSettings@endlink Created in NX6.0.0
TToolBuilder	Represents a T Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTToolBuilder Created in NX5.0.0
TurnAvoidanceApproachBuilder	Represents an avoidance start of engage Builder Created in NX6.0.0
TurnAvoidanceClearanceBuilder	Represents an avoidance start of engage Builder Created in NX6.0.0
TurnAvoidanceDepartureBuilder	Represents an avoidance start of engage Builder Created in NX6.0.0
TurnAvoidanceFromBuilder	Represents an avoidance from Builder Created in NX6.0.0
TurnAvoidanceGeomBuilder	Represents a TurnAvoidanceGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnAvoidanceGeomBuilder Created in NX5.0.0
TurnAvoidanceGohomeBuilder	Represents an avoidance return Builder Created in NX6.0.0
TurnAvoidancePathPointsBuilder	Represents a turn avoidance path points builder Created in NX6.0.0
TurnAvoidanceReturnBuilder	Represents an avoidance return Builder Created in NX6.0.0
TurnAvoidanceStartBuilder	Represents an avoidance start Builder Created in NX6.0.0
TurnAvoidanceStartOfEngageBuilder	Represents an avoidance start of engage Builder Created in NX6.0.0
TurnBoundaryGeomBuilder	Represents a TurnBoundaryGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnBoundaryGeomBuilder Created in NX5.0.0
TurnConcaveCornerControl	Represents a concave corner ja Created in NX6.0.2
TurnCornerControl	Represents a first plunge ja Created in NX6.0.0
TurnCutParameters	Represents a CAM::TurnCutParameters
TurnCutterClearance	Represents a CAM::TurnCutterClearance
TurnDirection	Represents a direction Created in NX6.0.0
TurnEngageRetractBuilder	Represents a first plunge Builder Created in NX6.0.0
TurnFeatureGeomBuilder	Represents a TurnFeatureGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnFeatureGeomBuilder Created in NX5.0.0
TurnGeomBuilder	Represents a TurnGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnGeomBuilder Created in NX5.0.0
TurnGrooveCornerControl	Represents a groove corner control ja Created in NX9.0.0
TurningOperation	Represents a Turning operation To create or edit an instance of this class, use CAM::TurningOperationBuilder Created in NX7.5.0
TurningOperationBuilder	Represents a Turning Operation Builder This is an abstract class and cannot be instantiated
TurningToolBuilder	Represents a Turning tool builder This is an abstract class, and cannot be instantiated
TurnMethodBuilder	Represents a Turn Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnMethodBuilder Created in NX5.0.0
TurnMoveToPointBuilder	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnMoveToPointBuilder Created in NX8.5.1
TurnOrientGeomBuilder	Represents a TurnOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnOrientGeomBuilder Created in NX5.0.0
TurnOrientWcs	Represents an Turn Orient Wcs Builder This is an abstract class, and cannot be instantiated
TurnOverlap	Represents a CAM::TurnOverlap
TurnPartProbing	Represents a Turn Part Probing operation To create or edit an instance of this class, use CAM::TurnPartProbingBuilder Created in NX8.5.1
TurnPartProbingBuilder	Represents a Turn Part Probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateTurnPartProbingBuilder Created in NX8.5.1
TurnProbeClearanceBuilder	Represents an probe start of engage Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnProbeClearanceBuilder Created in NX8.5.1
TurnProbeInspectPointMoveBuilder	Represents the Turn Probe Inspect Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnProbeInspectPointMoveBuilder Created in NX8.5.1
TurnRoughFinishLocalReturnBuilder	Represents an avoidance start Builder Created in NX6.0.0
TurnRoughFinishTestCut	Represents a test cut builder Created in NX8.0.0
TurnRoughVariableIncrementBuilder	Represents a Variable Increment Builder Created in NX6.0.0
TurnStock	Represents a CAM::TurnStock
TurnThreadEngageRetractBuilder	Represents a Thread Turning Engage or Retract Builder Created in NX6.0.0
TurnThreadFinishPassesBuilder	Represents a TurnThreadFinishPasses Builder Created in NX6.0.0
TurnToolBuilder	Represents a Turn tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnToolBuilder Created in NX5.0.0
TurnToolProbing	Represents a Turn tool operation To create or edit an instance of this class, use CAM::TurnToolProbingBuilder Created in NX8.5.1
TurnToolProbingBuilder	Represents a Turn tool probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateTurnToolProbingBuilder Created in NX8.5.1
Ude	Represets a User Defined Event To create a new instance of this class, use CAM::UdeSet::CreateUde Created in NX7.0.0
UdeList	Represents a list of objects
UdeMoveBuilder	Represents the Ude Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateUdeMoveBuilder Created in NX5.0.0
UdeParameter	Represents a User Defined Event Parameter Created in NX7.5.0
UdeSet	Represets a set of User Defined Events Created in NX7.5.0
UdtSectionBuilder	Represents a UdtSection Builder Created in NX5.0.0
UpDownCutting	Represents a CAM::UpDownCutting
UserDefinedMoveBuilder	Represents the User Defined Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateUserDefinedMoveBuilder Created in NX8.0.0
UserDefinedOpr	Represents a User Defined operation To create or edit an instance of this class, use CAM::UserDefinedOprBuilder Created in NX7.5.0
UserDefinedOprBuilder	Represents a UserDefinedOpr Builder This is an abstract class, and cannot be instantiated
VariableZLevelMilling	Represents a Variable Z Level Milling Operation To create or edit an instance of this class, use CAM::VazlMillingBuilder Created in NX7.5.0
VazlMillingBuilder	Represents a VazlMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateVazlMillingBuilder Created in NX5.0.0
VectorDistanceMoveBuilder	Represents the Vector Distance Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateVectorDistanceMoveBuilder Created in NX5.0.0
VerticalPosition	Represents a VerticalPosition Builder Created in NX7.5.0
VolumeBased25DMillingOperation	Represents a Floor Wall Milling Operation To create or edit an instance of this class, use CAM::VolumeBased25DMillingOperationBuilder Created in NX8.5.0
VolumeBased25DMillingOperationBuilder	Represents a VolumeBased25DMillingOperation Builder To create a new instance of this class, use CAM::OperationCollection::CreateVolumeBased25dMillingOperationBuilder Created in NX8.5.0
WedmArcOutputTypeCiBuilder	Represents a WedmArcOutputTypeCiBuilder Created in NX7.5.0
WedmBasedGeomBuilder	Represents a WedmBasedGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmBasedGeomBuilder Created in NX5.0.0
WedmCornerControlBuilder	Represents a WedmCornerControl Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmCornerControlBuilder Created in NX6.0.0
WedmCustomBoundaryDataBuilder	Represents a WedmCustomBoundaryData Builder No Creator Created in NX6.0.0
WedmCustomBoundaryDataBuilderList	Represents a list of objects
WedmCutOrderBuilder	Represents a CAM::WedmCutOrderBuilder This builder cannot be instantiated separately
WedmCutParameters	Represents a CAM::WedmCutParameters
WedmCuttingBuilder	Represents a WedmCutting Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmCuttingBuilder Created in NX6.0.0
WedmExtGeomBuilder	Represents a WedmExtGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmExtGeomBuilder Created in NX5.0.0
WedmFeatureGeomBuilder	Represents a WedmFeatureGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmFeatureGeomBuilder Created in NX5.0.0
WedmGeomBuilder	Represents a WedmGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmGeomBuilder Created in NX7.5.0
WedmIntGeomBuilder	Represents a WedmIntGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmIntGeomBuilder Created in NX5.0.0
WedmLeadInOutBuilder	Represents a WedmLeadInOut Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmLeadInOutBuilder Created in NX6.0.0
WedmMachineControl	Represents a WEDM Machine Control operation To create or edit an instance of this class, use CAM::WedmMachineControlBuilder Created in NX7.5.0
WedmMachineControlBuilder	Represents a WedmMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmMachineControlBuilder Created in NX5.0.0
WedmMethodBuilder	Represents a Wedm Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmMethodBuilder Created in NX5.0.0
WedmMoveControlBuilder	Represents a WedmMoveControl Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmMoveControlBuilder Created in NX6.0.0
WedmNocoreGeomBuilder	Represents a WedmNocoreGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmNocoreGeomBuilder Created in NX5.0.0
WedmOpenGeomBuilder	Represents a WedmOpenGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmOpenGeomBuilder Created in NX5.0.0
WedmOperationBuilder	Represents a WedmOperation Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmOperationBuilder Created in NX7.5.0
WedmOrientGeomBuilder	Represents a WedmOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmOrientGeomBuilder Created in NX5.0.0
WedmPointDefinitionBuilder	Represents a CAM::WedmPointDefinitionBuilder This builder cannot be instantiated separately
WedmStatusControlCiBuilder	Represents a WedmStatusControlCiBuilder Created in NX7.5.0
WedmStepoverBuilder	Represents a CAM::WedmStepoverBuilder
WedmUserDefined	Represents a User Defined WEDM operation To create or edit an instance of this class, use CAM::WedmUserDefinedBuilder Created in NX7.5.0
WedmUserDefinedBuilder	Represents a WedmUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmUserDefinedBuilder Created in NX5.0.0
WireGuide	Represents a wire guide object To create a new instance of this class, use CAM::WireTool::CreateWireGuide Created in NX9.0.0
WireGuideList	Represents a list of objects
WireTool	Represents a Wire Tool To create a new instance of this class, use CAM::NCGroupCollection::CreateWireTool Created in NX9.0.0
ZAxisSmoothing	Represents a @link CAM::ZAxisSmoothing CAM::ZAxisSmoothing@endlink Created in NX7.5.0
ZLevelMilling	Represents a Z Level Milling Operation To create or edit an instance of this class, use CAM::ZLevelMillingBuilder Created in NX7.5.0
ZLevelMillingBuilder	Represents a ZLevelMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateZlevelMillingBuilder Created in NX5.0.0
Die	Provides classes and interfaces relating to Die Engineering and Die Design
AddendumSectionBuilder	Represents a Die::AddendumSectionBuilder which is used to create or edit an addendum section
AddendumSectionUserDefinedBuilder	Represents a Die::AddendumSectionUserDefinedBuilder builder used to select a previously defined section or a string of objects to define the section shape
AddSurfBuilder	Represents a Die::AddSurfBuilder builder To create a new instance of this class, use Die::DieCollection::CreateAddSurfBuilder Created in NX6.0.0
CastRelief	Represents a cast relief feature To create or edit an instance of this class, use Die::CastReliefBuilder Created in NX6.0.0
CastReliefBuilder	Represents a @link Die::CastReliefBuilder Die::CastReliefBuilder@endlink builder <br> To create a new instance of this class, use @link Die::DieCollection::CastRelief Die::DieCollection::CastRelief @endlink <br> Default values
CastReliefParentBuilder	Represents a Die Cast Relief sub feature
ClampingSlot	Represents a clamping slot feature To create or edit an instance of this class, use Die::ClampingSlotBuilder Created in NX6.0.0
ClampingSlotBuilder	Represents a Clamping Slot feature builder <br> To create a new instance of this class, use @link Die::DieCollection::ClampingSlot Die::DieCollection::ClampingSlot @endlink <br> Default values
Clearance	Represents a die design clearance feature
ClearanceBuilder	Represents a builder that is used to create or edit a Die::Clearance feature
CompensateRoughDataBuilder	Represents a Die::CompensateRoughDataBuilder
ConnectProfileParentBuilder	Represents a Die Connecting Profile sub feature
DeckParentBuilder	Represents a Die Deck Feature sub feature
DieAssistantFlangeProfile	Represents a Die::DieAssistantFlangeProfile
DieAssistantFlangeProfileList	Represents a list of objects
DieAssistantTrimProfile	Represents a Die::DieAssistantTrimProfile
DieAssistantTrimProfileList	Represents a list of objects
DieAttributesBuilder	Represents a Die::DieAttributesBuilder
DieBooleanBuilder	Represents a Die::DieBooleanBuilder
DieBooleanBuilderList	Represents a list of objects
DieCollection	Represents a Die Engineering/Design feature builder
iterator	Iterator for accessing the contents of the collection
DieDirectionBuilder	Represents a Die::DieDirectionBuilder
DieLimitsBuilder	Limits a path to a segment of the path
DieLimitsBuilderList	Represents a list of objects
DieLocationBuilder	Represents a Die::DieLocationBuilder
DieLocationBuilderList	Represents a list of objects
DieLocationsBuilder	Represents a Die::DieLocationsBuilder
DiePlaneBuilder	Represents a Die::DiePlaneBuilder
DieShoe	Represents a die shoe feature To create or edit an instance of this class, use Die::DieShoeBuilder Created in NX6.0.0
DieShoeBuilder	Represents a Die Shoe feature builder
DieSimCollection	Represents a collection of Die Simulation - Press Models To obtain an instance of this class, refer to Part Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
DrawBead	Represents a draw bead feature
DrawBeadBuilder	Represents a builder that is used to create or edit a Die::DrawBead feature
DrawBeadSegmentBuilder	Segment builder for Die Engineering draw bead
DrawBeadSegmentBuilderList	Represents a list of objects
DrawBeadTaperBuilder	Taper definition for the end of the Die Engineering Draw Bead
DrawDiePunchBuilder	Represents a Draw Die Punch feature builder
DrawDiePunchSectionBuilder	Represents a Draw Die Punch Section sub feature
FaceSheetBuilder	Represents a Face Sheet feature This is an abstract class, and cannot be created
FillArea	Represents a die design fill area feature
FillAreaBuilder	Represents a builder that is used to create or edit a Die::FillArea feature
FillBuilder	Represents an Area Fill feature To create a new instance of this class, use Die::DieCollection::Fill Created in NX4.0.0
FingerClearanceNotch	Represents a die design finger clearance notch feature
FingerClearanceNotchBuilder	Represents a builder that is used to create or edit a Die::FingerClearanceNotch feature
FlangeSteelRibChildBuilder	Represents a Die Flange Steel Rib Child sub feature
FlangeSteelRibParentBuilder	Represents a Die Flange Steel Rib Parent sub feature
FlangeTaskBuilder	Represents a Flange Task feature builder
FormTaskBuilder	Represents a Form Task feature builder
HandlingCoreBuilder	Represents a builder that is used to create or edit a Die::HandlingCore feature
HandlingCoreChildBuilder	Represents a Die Handling Core Child sub feature
HandlingCoreParentBuilder	Represents a Die Handling Core Parent sub feature
Heelpost	Represents a heelpost feature To create or edit an instance of this class, use Die::HeelpostBuilder Created in NX6.0.0
HeelpostBuilder	Represents a @link Die::HeelpostBuilder Die::HeelpostBuilder@endlink builder <br> To create a new instance of this class, use @link Die::DieCollection::Heelpost Die::DieCollection::Heelpost @endlink <br> Default values
HoleChildBuilder	Represents a Die Hole Child sub feature
HoleParentBuilder	Represents a Die Hole Parent sub feature
Keyway	Represents a keyway feature To create or edit an instance of this class, use Die::KeywayBuilder Created in NX6.0.0
KeywayBuilder	Represents a @link Die::KeywayBuilder Die::KeywayBuilder@endlink builder <br> To create a new instance of this class, use @link Die::DieCollection::Keyway Die::DieCollection::Keyway @endlink <br> Default values
KeywayChildBuilder	Represents a Die Keyway Child sub feature
KeywayParentBuilder	Represents a Die Keyway Parent sub feature
LineupBuilder	Represents a Lineup feature builder To create a new instance of this class, use Die::DieCollection::Lineup Created in NX4.0.0
MachineRelief	Represents a die design machine relief feature
MachineReliefBuilder	Represents a builder that is used to create or edit a Die::MachineRelief feature
OutputCurvesBuilder	Represents an output curves feature builder
PadChildBuilder	Represents a Die Pad Child sub feature
PadParentBuilder	Represents a Die Pad Parent sub feature
PierceHoleChildBuilder	Represents a Pierce Hole Child sub feature
PierceHoleParentBuilder	Represents a Pierce Hole Parent sub feature
PierceItemBuilder	Represents a Die::PierceItemBuilder
PierceItemBuilderList	Represents a list of objects
PierceTaskBuilder	Represents a Pierce Task feature builder To create a new instance of this class, use Die::DieCollection::PierceTask Created in NX4.0.0
PointChildBuilder	Represents a Die Point Child sub feature
PointParentBuilder	Represents a Die Point Parent sub feature
PressModel	Represents a Die Simulation - Press Model Created in NX6.0.0
PressModelRoot	Represents a Die Simulation - Press Model Root
PressureSystemChildBuilder	Represents a Die Pressure System Child sub feature
PressureSystemParentBuilder	Represents a Die Pressure System Parent sub feature
QuickBinderBuilder	Represents a Die::QuickBinderBuilder builder which builds a developable binder sheet body by adding cones, cylinders, or planes to an approximated face
QuickBinderWrapBuilder	Represents a Die::QuickBinderWrapBuilder builder This is an abstract class, and cannot be created
RibChildBuilder	Represents a Die Rib Child sub feature
RibParentBuilder	Represents a Die Rib Parent sub feature
RotorBuilder	Represents a CAM Rotor feature builder
RotorSectionBuilder	Represents a Rotor Section sub feature
SpringbackCompensation	Represents a springback compensation feature
SpringbackCompensationBuilder	Used to create or edit a Die::SpringbackCompensation feature
SteelInsertBuilder	Represents a Steel Insert feature builder
SteelInsertSectionBuilder	Represents a Steel Insert Section sub feature
SteelInsertSegmentChildBuilder	Represents a Steel Insert Segment Child sub feature
SteelInsertSegmentParentBuilder	Represents a Steel Insert Segment Parent sub feature
ThroatChildBuilder	Represents a Die Throat Child sub feature
ThroatParentBuilder	Represents a Die Throat Parent sub feature
Tip	Represents a Tip feature
TrimFlangeDieAssistant	Represents a trim/flange die assistant To create or edit an instance of this class, use Die::TrimFlangeDieAssistantBuilder Created in NX5.0.0
TrimFlangeDieAssistantBuilder	Represents a Die::TrimFlangeDieAssistantBuilder To create a new instance of this class, use Die::DieCollection::TrimFlangeDieAssistant Created in NX5.0.0
TrimLineDevelopmentBuilder	Represents a Features::TrimLineDevelopment builder To create a new instance of this class, use Die::DieCollection::CreateTrimLineDevelopmentBuilder Created in NX6.0.0
TrimTaskBuilder	Represents a Trim Task feature builder
UncutRegionsBuilder	Calculates the uncut regions of a curve given a radius value for the cut tool
WearPlateLocChildBuilder	Represents a Die Wear Plate Locator sub feature
WearPlateLocParentBuilder	Represents a Die Wear Plate Locator sub feature
Display	Provides classes and interfaces for Display
Background	Represents a Display::Background Background defines how background pixels are displayed
BoundedGrid	Represents a bounded grid Bounded grids are not supported in KF
BoundedGridBuilder	Represents the builder for creating a bounded grid Display::BoundedGrid
Camera	Represents a camera To obtain an instance of this class, use Display::CameraCollection Created in NX5.0.0
CameraBuilder	Represents a Display::CameraBuilder Cameras are not supported in KF
CameraCollection	Represents a collection cameras To obtain an instance of this class, refer to BasePart Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
CgfxAttr	Represents a Cgfx Attribute This class is restricted to being called from a program running during an Interactive NX session
CgfxAttrCollection	Represents a collection CgFX attr ja_class objects This class is restricted to being called from a program running during an Interactive NX session
iterator	Iterator for accessing the contents of the collection
CgfxAttributeValueColor3Builder	Represents a Display::CgfxAttributeValueColor3Builder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueColor4Builder	Represents a Display::CgfxAttributeValueColor4Builder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueFileBuilder	Represents a Display::CgfxAttributeValueFileBuilder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueFloat3Builder	Represents a Display::CgfxAttributeValueFloat3Builder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueFloat4Builder	Represents a Display::CgfxAttributeValueFloat4Builder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueIntegerBuilder	Represents a Display::CgfxAttributeValueIntegerBuilder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxAttributeValueNumberBuilder	Represents a Display::CgfxAttributeValueNumberBuilder builder This class is restricted to being called from a program running during an Interactive NX session
CgfxMattex	Represents a Cgfx Material This class is restricted to being called from a program running during an Interactive NX session
CgfxMattexBuilder	Represents a Display::CgfxMattex builder This class is restricted to being called from a program running during an Interactive NX session
CgfxMattexCollection	Represents a collection CgFX mattex ja_class objects To obtain an instance of this class, refer to BasePart Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
DatumPlaneGrid	Represents a grid on a datum plane Datum plane grids are not supported in KF
DatumPlaneGridBuilder	Represents the builder for adding a datum plane grid Display::DatumPlaneGrid to a datum plane
DecalBuilder	Represents a Display::DecalBuilder This class is restricted to being called from a program running during an Interactive NX session
DecalCollection	Represents a collection decal material texture This class is restricted to being called from a program running during an Interactive NX session
iterator	Iterator for accessing the contents of the collection
DynamicSection	Represents a dynamic section To create or edit an instance of this class, use Display::DynamicSectionBuilder Created in NX6.0.0
DynamicSectionBuilder	Represents a Dynamic Section Builder used for creating sections
DynamicSectionCollection	Represents a collection of dynamic section objects To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
DynamicSectionTypes	Represents a enumerations used by Dynamic Section Builder
EntitySelectionPlane	Represents a grid on a datum plane Entity selection planes are not supported in KF
ExtractScene	Represents a Display::ExtractScene This class is restricted to being called from a program running during an Interactive NX session
FacetSettingsBuilder	Represents a Display::FacetSettingsBuilder Facet Settings are not supported in KF
GlobalIlluminationBuilder	Represents a Display::GlobalIlluminationBuilder
Grid	Represents a grid Grids are not supported in KF
GridBuilder	Represents the builder for adding a grid Display::Grid This is an abstract class, and cannot be instantiated
GridCollection	Represents a collection of plane grid objects To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
Image	Represents a Display::Image This class is restricted to being called from a program running during an Interactive NX session
ImageBase	Represents a Display::ImageBase that provides definition, orientation, sizing, and display setting controls for image based objects
ImageBaseBuilder	Represents a Display::ImageBaseBuilder
ImageBasedLighting	Represents a Display::ImageBasedLighting Image-based Lighting (IBL) is only performed in High Quality Image renderings
ImageCollection	Represents a collection of image objects To obtain an instance of this class, refer to BasePart Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
ImageData	Represents a Display::ImageData that stores the contents of a previously imported image file in the part
ImageDataCollection	Represents a collection of Display::ImageData objects
iterator	Iterator for accessing the contents of the collection
ImageTestBuilder	Supports debug dialog UGS::DebugUI::UICompImageTest which is used to test Gateway::ImageIO, DSS, CGP, AW2D, and CGM image functionality
LayerSettingsBuilder	Represents a builder for object layer settings
LightBuilder	Represents a Display::LightBuilder This class is restricted to being called from a program running during an Interactive NX session
Lighting	Represents a Display::Lighting Lights are used to illuminate the scene in Shaded and Studio rendering styles, as well as in High Quality Images
NonProportionalZoom	Provides non-proportional zoom capability <br> To create a new instance of this class, use @link ViewCollection::CreateNonProportionalZoom ViewCollection::CreateNonProportionalZoom @endlink <br> Default values
PerspectiveOptionsBuilder	Represents a Display::PerspectiveOptionsBuilder Cameras are not supported in KF
PlanarShipGrid	Represents a planar ship grid
PlanarShipGridBuilder	Represents a Display::PlanarShipGrid builder
PlaneGrid	Represents a grid on a bounded plane Plane grids are not supported in KF
PlaneGridBuilder	Represents the builder for adding a bounded grid Display::PlaneGrid to a plane
RasterImage	Represents a Display::RasterImage that provides placing an imported image onto a plane (with controls for orientation, sizing, and display) to use as a reference in the model to create geometry
RasterImageBuilder	Represents a Display::RasterImageBuilder
RayTracedStudioBuilder	Represents a Display::RayTracedStudioBuilder
RayTracedStudioEditorBuilder	Represents a Display::RayTracedStudioEditorBuilder
Reflection	Represents a Display::Reflection Reflection defines the source of reflection in shiny objects for Studio rendering style or High Quality Images
SaveImageFileBrowserBuilder	Represents a Display::SaveImageFileBrowserBuilder
Scene	Represents a Display::Scene A scene is comprised of background, stage, reflection, lights and image-based lighting subobjects
SectionCurveSettingsBuilder	Represents a Display::SectionCurveSettingsBuilder
SelPref	Represents a Display::SelPref To obtain a instance of this class use Display::SelPrefCollection::CreateSelPref Created in NX5.0.0
SelPrefCollection	Represents a collection SelPref To obtain an instance of this class, refer to BasePart Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
Shadows	Represents a Display::Shadows This class is restricted to being called from a program running during an Interactive NX session
Stage	Represents a Display::Stage A stage is an environment cube, a six-sided room, that can have between one and six visible walls
StudioImageCaptureBuilder	Represents a Display::StudioImageCaptureBuilder This class is restricted to being called from a program running during an Interactive NX session
TransientText	Represents temporary text strings which can be used for Temporary Display Created in NX8.0.0
TrueShading	Represents a True Shading object TrueShading is not supported in KF
TrueShadingBuilder	Represents a Display::TrueShading builder To create a new instance of this class, use Display::TrueShadingCollection::CreateTrueShadingBuilder Created in NX6.0.0
TrueShadingCollection	Represents a collection SHED objects To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
TrueStudio	Represents a True Shading object TrueStudio is not supported in KF
TrueStudioBuilder	The TrueStudioBuillder manages Advanced Studio visualization display To create a new instance of this class, use Display::TrueStudioCollection::CreateTrueStudioBuilder Created in NX8.0.0
TrueStudioCollection	Represents a collection TrueStudio objects To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
Wall	Represents a Display::Wall This class is restricted to being called from a program running during an Interactive NX session
Drafting	Provides classes and interfaces for the Drafting
AnnotateViewsBuilder	This class is used to annotate views based on the knowledge fusion rules
AttributeItemBuilder	Represents a Drafting::AttributeItemBuilder
AttributeItemBuilderList	Represents a list of objects
AutomationManager	Represents a AutomationManager
AutomationPreferencesBuilder	Builder for Drafting Automation Preferences To create a new instance of this class, use Drafting::AutomationManager::CreatePreferencesBuilder Created in NX8.0.0
AutomationRuleBuilder	Represents a Drafting::AutomationRuleBuilder Created in NX9.0.0
BaseEditSettingsBuilder	Represents a Drafting::BaseEditSettingsBuilder
CutCopyPasteBuilder	Represents a paste in Drafting
CutCopyPasteLeaderBuilder	Represents a Drafting Paste, especially when reassociating a leader on paste
DistributeAnnotationsBuilder	This class is used to distribute annotations associated to a view
DraftingApplicationManager	Represents an object that manages drafting objects and member views
DrawingCreationWizardBuilder	Represents a Drafting::DrawingCreationWizardBuilder
MoveToDrawingViewBuilder	This builder allows the user to extract contents from a sheet and transfer them to a new Drawing view, also provide some other options for view creation <br> To create a new instance of this class, use @link Drafting::DraftingApplicationManager::CreateMoveToDrawingViewBuilder Drafting::DraftingApplicationManager::CreateMoveToDrawingViewBuilder @endlink <br> Default values
PreferencesBuilder	Represents a @link Drafting::PreferencesBuilder Drafting::PreferencesBuilder@endlink builder <br> To create a new instance of this class, use @link Drafting::SettingsManager::CreatePreferencesBuilder Drafting::SettingsManager::CreatePreferencesBuilder @endlink <br> Default values
PrimaryContentItemBuilder	Represents a Drafting::PrimaryContentItemBuilder
PrimaryContentItemBuilderList	Represents a list of objects
RulesBuilder	This class is used to specify knowledge fusion rules in a drawing template
SettingsManager	Represents an object that manages drafting settings
SmashDrawingViewBuilder	This builder allows the user to break a Drawing View into its parts and delete the Drawing View To create a new instance of this class, use Drafting::DraftingApplicationManager::CreateSmashDrawingViewBuilder Created in NX8.5.0
SpecifyRuleBuilder	This class is used to specify knowledge fusion rule for a note object in a drawing template
Drawings	Provides classes and interfaces for Drafting Drawings
AddObjectsToRegionBuilder	Creates the builder for associating the symbols from library to the region To create a new instance of this class, use Drawings::DrawingRegionCollection::CreateAddObjectsToRegionBuilder Created in NX8.0.0
AddRemoveBoxViewBuilder	This class is used to construct the add remove box view Builder To create a new instance of this class, use Drawings::DraftingViewCollection::CreateAddRemoveBoxViewBuilder Created in NX8.0.0
AutomationBookletBuilder	Represents a Drawings::AutomationBookletBuilder
AutomationTemplateRegionBuilder	Represents a Drawings::AutomationTemplateRegionBuilder
BaseView	Represents a Base View
BaseViewBuilder	Represents a @link Drawings::BaseView Drawings::BaseView@endlink builder <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateBaseViewBuilder Drawings::DraftingViewCollection::CreateBaseViewBuilder @endlink <br> Default values
BaseViewStyle	Represents set of Base View Style Preferences applicable to drafting views
BordersAndZones	Represents Borders and Zones To create or edit an instance of this class, use Drawings::BordersAndZonesBuilder Created in NX8.0.0
BordersAndZonesBuilder	Builder for creating Borders and Zones
BordersAndZonesCollection	Represents a collection of Drawings::BordersAndZones objects To obtain an instance of this class, refer to DraftingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
BrokenViewBuilder	This class is used to construct the broken view Builder <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateBrokenViewBuilder Drawings::DraftingViewCollection::CreateBrokenViewBuilder @endlink <br> Default values
CompareReportBuilder	Represents a Drawings::CompareReportBuilder builder To create a new instance of this class, use DrawingCompareManager::CreateCompareReportBuilder Created in NX7.5.0
CustomViewSettingsBuilder	This class represents the "this class represents Drawings.CustomViewSettingsBuilder
DetailView	Represents a Detail View
DetailViewBuilder	Represents a Drawings::DetailView
DraftingBody	Represents a drafting body
DraftingBodyCollection	Represents a collection of Drawings::DraftingBody s
iterator	Iterator for accessing the contents of the collection
DraftingCurve	Represents a Drafting VD Curve
DraftingCurveCollection	Represents a collection of Drawings::DraftingCurve s
iterator	Iterator for accessing the contents of the collection
DraftingView	Represents a drafting view
DraftingViewCollection	Represents a collection of Drawings::DraftingView s
iterator	Iterator for accessing the contents of the collection
DrawingCompareSettingsBuilder	Represents a @link Drawings::DrawingCompareSettingsBuilder Drawings::DrawingCompareSettingsBuilder@endlink builder <br> To create a new instance of this class, use @link DrawingCompareManager::CreateDrawingCompareSettingsBuilder DrawingCompareManager::CreateDrawingCompareSettingsBuilder @endlink <br> Default values
DrawingFormatSheetBuilder	Represents a Drawings::DrawingFormatSheetBuilder
DrawingRegion	Represents a Drawing Region To create or edit an instance of this class, use Drawings::DrawingRegionBuilder Created in NX8.0.0
DrawingRegionBuilder	Represents a Drawing Region Builder <br> To create a new instance of this class, use @link Drawings::DrawingRegionCollection::CreateDrawingRegionBuilder Drawings::DrawingRegionCollection::CreateDrawingRegionBuilder @endlink <br> Default values
DrawingRegionCollection	Represents a collection of drawing regions Use Drawings::DrawingRegion to get the instance of this class
iterator	Iterator for accessing the contents of the collection
DrawingRegionRulesBuilder	Represents a Drawing region rules builder Created in NX8.0.0
DrawingSheet	Represents a drawing sheet
DrawingSheetBuilder	Represents a Drawings::DrawingSheetBuilder To create a new instance of this class, use Drawings::DrawingSheetCollection::DrawingSheetBuilder Created in NX5.0.0
DrawingSheetCollection	Represents a collection of drawing sheets
iterator	Iterator for accessing the contents of the collection
DrawingView	Drawing View - an empty view created without any geometric objects
DrawingViewBuilder	This builder allows the user to create a Drawing View <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateDrawingViewBuilder Drawings::DraftingViewCollection::CreateDrawingViewBuilder @endlink <br> Default values
EditSectionLineSettingsBuilder	Represents a Drawings::EditSectionLineSettingsBuilder builder
EditViewLabelSettingsBuilder	Represents a Drawings::EditViewLabelSettingsBuilder builder
EditViewSettingsBuilder	Represents a Drawings::EditViewSettingsBuilder builder
FlatPatternObject	Provides an interface to the data available for flat pattern objects on drawing views
FlatPatternViewStyle	Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings
GeneralViewStyle	Represents set of General View Styles Preferences applicable to drafting views
GeneralWorkFlowBuilder	Represents a Drawings::GeneralWorkFlowBuilder
HalfPictorialSectionLine	Half Pictorial Section Line is used to create a pictorial view with half of the part sectioned and the other half un-sectioned
HalfSectionLine	Half Section Line is used to create a view with half of the part sectioned and the other half un-sectioned
HalfSectionLineBuilder	Represents a Drawings::HalfSectionLineBuilder
HiddenLinesViewStyle	Represents set of Hidden Lines View Style Preferences applicable to drafting views
HiddenObjectsBuilder	This builder allows the user to select a view in which component objects can be designated as hidden or shown Created in NX6.0.0
HingeLineBuilder	Represents a Drawings.HingeLineBuilder
InheritPmiViewStyle	Represents set of InheritPmiViewStyle applicable to drafting views
MarkAsTemplateBuilder	Represents a Drawings::MarkAsTemplateBuilder To create a new instance of this class, use DraftingManager::CreateMarkAsTemplateBuilder Created in NX8.0.0
MultipleViewPlacementBuilder	This builder allows the user to create a Multiple View Placement Created in NX6.0.2
OrientationViewStyle	Represents set of Orientation View Style Preferences applicable to drafting views
OrientedSectionLine	Represents a Oriented Section Line
OrientedSectionLineBuilder	Represents a Drawings::OrientedSectionLineBuilder
OvtBuilder	Represents a Drawings::OvtBuilder
ParentViewBuilder	Represents a Drawings::ParentViewBuilder
PerspectiveViewStyle	Represents set of PerspectiveViewStyle applicable to drafting views
PictorialSectionLine	A Pictorial Simple or Pictorial Stepped Section Line
PointAndAngleSectionLine	Point and Angle Section Line lets you create a view with multiple segment cuts with no bends
PointAndAngleSectionLineBuilder	Represents a Drawings::PointAndAngleSectionLineBuilder
PointToPointSectionLine	Point to Point Section Line lets you create a view with multiple segment cuts with no bends
PointToPointSectionLineBuilder	Represents a Drawings::PointToPointSectionLineBuilder
ProjectedView	Represents a Projected View
ProjectedViewBuilder	Represents a @link Drawings::ProjectedView Drawings::ProjectedView@endlink builder <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateProjectedViewBuilder Drawings::DraftingViewCollection::CreateProjectedViewBuilder @endlink <br> Default values
ProjectedViewOrientationBuilder	Represents a Drawings::ProjectedViewOrientationBuilder
ProjectedViewStyle	Represents set of Projected View Style Preferences applicable to drafting views
RefineDisplayBuilder	Represents a Drawings::RefineDisplayBuilder
RemoveObjectsBuilder	Creates the builder for removing associated objects from the region To create a new instance of this class, use Drawings::DrawingRegionCollection::CreateRemoveObjectsBuilder Created in NX8.0.0
RenderSet	Represents a RenderSet
RevolvedSectionLine	Revolved Section Line is used to create section views which are revolved about an axis
RevolvedSectionLineBuilder	Represents a Drawings::RevolvedSectionLineBuilder
SectionInViewBuilder	This builder allows the user to select a view in which component or solid body objects can be designated as section, non-sectioned, or neither <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateSectionInViewBuilder Drawings::DraftingViewCollection::CreateSectionInViewBuilder @endlink <br> Default values
SectionLine	Represents a Section Line
SectionLineBuilder	Represents a Drawings::SectionLineBuilder
SectionLineCollection	Represents a collection of Drawings::SectionLine s
iterator	Iterator for accessing the contents of the collection
SectionLineSegmentBuilder	Represents a Drawings::SectionLineSegmentBuilder
SectionLineSegmentBuilderList	Represents a list of objects
SectionLineStyleBuilder	Represents a Drawings.SectionLineStyleBuiler
SectionView	Represents a Section View
SectionViewBuilder	Represents a @link Drawings::SectionView Drawings::SectionView@endlink builder <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateSectionViewBuilder Drawings::DraftingViewCollection::CreateSectionViewBuilder @endlink <br> Default values
SectionViewStyle	Represents set of Section View Style Preferences applicable to drafting views
SelectDraftingView	Represents a single object selection
SelectDraftingViewList	Represents a list of objects on a selection list
SelectDrawingRegion	Represents a single object selection
SelectDrawingView	Represents a single object selection
SelectDrawingViewList	Represents a list of objects on a selection list
SelectModelViewBuilder	Represents a Select Model View builder that selects a model view
SelectRegionBuilder	Creates the builder for associating the objects from the screen To create a new instance of this class, use Drawings::DrawingRegionCollection::CreateSelectRegionBuilder Created in NX8.0.0
SelectSectionLine	Represents a single object selection
ShadingViewStyle	Represents set of Shading View style applicable to drafting views
SheetDraftingViewCollection	Represents a collection of Drawings::DraftingView s
iterator	Iterator for accessing the contents of the collection
SheetSectionLineCollection	Represents a collection of Drawings::SectionLine s
iterator	Iterator for accessing the contents of the collection
SheetTemplateManager	Represents a manager of Drawings::DraftingView s
SheetZoneReferenceBuilder	Builder for creating sheet zone refernce control strings based on the selected attribute and view To create a new instance of this class, use DraftingManager::CreateSheetZoneReferenceBuilder Created in NX8.0.0
ShipbuildingLinesViewStyle	Represents set of Shipbuilding Lines View Style applicable to drafting views
SmoothEdgesViewStyle	Represents set of Smooth Edges View Style Preferences applicable to drafting views
SpecifySectionLineBuilder	Select a section line Created in NX6.0.0
StandardViewsBuilder	This builder allows the user to create a Drawing View <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateStandardViewsBuilder Drawings::DraftingViewCollection::CreateStandardViewsBuilder @endlink <br> Default values
SteppedSectionLine	A Simple or Stepped Section Line
SteppedSectionLineBuilder	Represents a Drawings::SteppedSectionLineBuilder
SvtBuilder	Represents a Drawings::SvtBuilder
ThreadsViewStyle	Represents set of Threads View Style Preferences applicable to drafting views
TraceLinesViewStyle	Represents interface for Trace Lines View Style Preferences applicable to drafting views
UpdateViewsBuilder	Represents a @link Drawings::UpdateViewsBuilder Drawings::UpdateViewsBuilder@endlink <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateUpdateViewsBuilder Drawings::DraftingViewCollection::CreateUpdateViewsBuilder @endlink <br> Created in NX5.0.0
View2dOrientBuilder	Represents the View 2D Orientation (Drawings.View2dOrientBuilder)
ViewAlignment	View Alignment object
ViewAlignmentBuilder	Represents a @link Drawings::ViewAlignmentBuilder Drawings::ViewAlignmentBuilder@endlink .This class is used to construct the view alignment Builder <br> To create a new instance of this class, use @link Drawings::ViewAlignmentCollection::CreateViewAlignmentBuilder Drawings::ViewAlignmentCollection::CreateViewAlignmentBuilder @endlink <br> Default values
ViewAlignmentCollection	Represents a collection of Drawings::ViewAlignment s
iterator	Iterator for accessing the contents of the collection
ViewBoundaryBuilder	Represents the View Boundary (Drawings.ViewBoundaryBuilder)
ViewBreak	ViewBreak - defines the portion of a view that gets hidden to produce a broken view <br> To create or edit an instance of this class, use @link Drawings::BrokenViewBuilder Drawings::BrokenViewBuilder @endlink <br> Created in NX7.5.0
ViewBreakBuilder	Represents a Drawings::ViewBreakBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
ViewBreakCollection	Represents a collection of Drawings::ViewBreak s
iterator	Iterator for accessing the contents of the collection
ViewCenterCoordinateBuilder	Represents the View center coodinate (Drawings.ViewCenterCoordinateBuilder) Created in NX6.0.0
ViewCommonViewLabelBuilder	Represents a Drawings::ViewCommonViewLabelBuilder
ViewCopyTo3dBuilder	Represents a Drawings::ViewCopyTo3dBuilder
ViewCreationWizardBuilder	This builder allows the user to create a Drawing View <br> To create a new instance of this class, use @link Drawings::DraftingViewCollection::CreateViewCreationWizardBuilder Drawings::DraftingViewCollection::CreateViewCreationWizardBuilder @endlink <br> Default values
ViewDetailLabelBuilder	Represents a Drawings::ViewDetailLabelBuilder
ViewingDirectionArrow	This class represents a Drafting Viewing Direction Arrow
ViewingDirectionArrowLabel	This class represents a Drafting Viewing Direction Arrow Label
ViewLabelBuilder	Represents a Drawings::ViewLabelBuilder
ViewOrientationBuilder	Represents a ViewOrientationBuilder
ViewPlacementBuilder	Represents a Drawings::ViewPlacementBuilder
ViewProjectedArrowSettingsBuilder	Represents a Drawings::ViewProjectedArrowSettingsBuilder Created in NX9.0.0
ViewProjectedLabelBuilder	Represents a Drawings::ViewProjectedLabelBuilder
ViewProjectedViewSettingsBuilder	Represents a Drawings::ViewProjectedViewSettingsBuilder Created in NX9.0.0
ViewProjectionBuilder	Represents a Drawings::ViewProjectionBuilder
ViewProjectionPlaneBuilder	Represents the View Projection Plane (Drawings.ViewProjectionPlaneBuilder) Created in NX6.0.2
ViewScaleBuilder	Represents the View Scale (Drawings.ViewScaleBuilder)
ViewSectionLabelBuilder	Represents a Drawings::ViewSectionLabelBuilder
ViewSectionLineBuilder	Represents a Drawings::ViewSectionLineBuilder
ViewStyle	Represents set of style applicable to drafting views
ViewStyleBaseBuilder	Represents the BASE tab on the View Style Dialog (Drawings.ViewStyleBaseBuilder)
ViewStyleBuilder	Represents the View Style Builder (Drawings.ViewStyleBuilder) which manages all the style attributes related to the view including base view, projected view, drawing view, detail view, broken view, section view etc
ViewStyleDetailBuilder	Represents the DETAIL tab on the View Style Dialog (Drawings.ViewStyleDetailBuilder)
ViewStyleFPCalloutConfigBuilder	Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
ViewStyleFPCalloutsBuilder	Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCalloutsBuilder)
ViewStyleFPCurvesBuilder	Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings.ViewStyleFPCurvesBuilder)
ViewStyleGeneralBuilder	Represents view style general builder (Drawings.ViewStyleGeneralBuilder) which manages all the general attributes which are necessary for all the views
ViewStyleHiddenLinesBuilder	Represents the HIDDEN LINES tab on the View Style Dialog (Drawings.ViewStyleHiddenLinesBuilder)
ViewStyleInheritPmiBuilder	Represents the INHERIT PMI tab on the View Style Dialog (Drawings.ViewStyleInheritPmiBuilder)
ViewStyleOrientationBuilder	Represents the ORIENTATION tab on the View Style Dialog (Drawings.ViewStyleOrientationBuilder)
ViewStylePerspectiveBuilder	Represents the PERSPECTIVE tab on the View Style Dialog (Drawings.ViewStylePerspectiveBuilder)
ViewStyleProjectedBuilder	Represents the PROJECTED tab on the View Style Dialog (Drawings.ViewStyleProjectedBuilder)
ViewStyleSectionBuilder	Represents the SECTION tab on the View Style Dialog (Drawings.ViewStyleSectionBuilder)
ViewStyleSectionConstraintsBuilder	Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings.ViewStyleSectionConstraintsBuilder)
ViewStyleShadingBuilder	Represents the SHADING tab on the View Style Dialog (Drawings.ViewStyleShadingBuilder)
ViewStyleShipbuildingLinesBuilder	Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings.ViewStyleShipbuildingLinesBuilder) To create a new instance of this class, use Drawings::DraftingViewCollection::CreateShipbuildingLineBuilder Created in NX8.0.0
ViewStyleShipbuildingLinesBuilderList	Represents a list of objects
ViewStyleSmoothEdgesBuilder	Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings.ViewStyleSmoothEdgesBuilder)
ViewStyleThreadsBuilder	Represents the THREADS tab on the View Style Dialog (Drawings.ViewStyleThreadsBuilder)
ViewStyleTraceLinesBuilder	Represents the TRACE LINES tab on the View Style Dialog (Drawings.ViewStyleTraceLinesBuilder)
ViewStyleVirtualIntersectionsBuilder	Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings.ViewStyleVirtualIntersectionsBuilder)
ViewStyleVisibleLinesBuilder	Represents the VISIBLE LINES tab on the View Style Dialog (Drawings.ViewStyleVisibleLinesBuilder)
ViewWorkflowBuilder	Represents a Drawings::ViewWorkflowBuilder Created in NX9.0.0
VirtualIntersectionsViewStyle	Represents set of Virtual Intersections View Style Preferences applicable to drafting views
VisibleLinesViewStyle	Represents set of Visible Lines View Style Preferences applicable to drafting views
Facet	Provides classes and interfaces for Faceted Representations
BestFitAlignBuilder	This class performs the best fit alignment between objects To create a new instance of this class, use Facet::FacetedBodyCollection::CreateBestFitAlignBuilder Created in NX6.0.0
BridgeFacetBodyBuilder	Represents a Facet::BridgeFacetBodyBuilder It bridges two disjoint NX facet bodies
CurvatureBuilder	Represents a Facet::CurvatureBuilder
DecimateFacetBodyBuilder	Represents a Facet::DecimateFacetBodyBuilder
ExtrudeFacetBodyBuilder	Represents a Facet::ExtrudeFacetBodyBuilder It extrudes a NX Facet Body
ExtrudeProfileBuilder	Represents a Facet::ExtrudeProfileBuilder It extrudes 3D closed profile between planes
FacetedBody	Represents a faceted body
FacetedBodyCollection	Represents a collection of faceted bodies in a part To obtain an instance of this class, refer to Part Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
FacetedEdge	Represents a faceted edge
FacetedFace	Represents a faceted face
FacetingParameters	The structure of JA faceting parameters
FeatureExtractionBuilder	Represents a Facet::FeatureExtractionBuilder It extracts feature lines or separates regions of different curvature from a facet body based on the curvature map
FillHoleBuilder	This class finds and fills holes to a prescribed boundary smoothness condition <br> To create a new instance of this class, use @link Facet::FacetedBodyCollection::CreateFillHoleBuilder Facet::FacetedBodyCollection::CreateFillHoleBuilder @endlink <br> Default values
MergeFacetBodyBuilder	Represents a Facet::MergeFacetBodyBuilder It merges two overlapping NX facet bodies
MultiPatchAlignmentBuilder	Aligns multiple facet bodies to one another without using reference points
SelectFacetedBody	Represents a single object selection
SelectFacetedBodyList	Represents a list of objects on a selection list
SewFacetBodyBuilder	Represents a Facet::SewFacetBodyBuilder It sews two touching NX facet bodies
SmoothFacetBodyBuilder	Represents a Facet::SmoothFacetBodyBuilder
SnipFacetBodyBuilder	Represents a SnipFacetBody builder <br> To create a new instance of this class, use @link Facet::FacetedBodyCollection::CreateSnipFacetBodyBuilder Facet::FacetedBodyCollection::CreateSnipFacetBodyBuilder @endlink <br> Default values
STLImportBuilder	The STL file import builder <br> To create a new instance of this class, use @link Facet::FacetedBodyCollection::CreateSTLImportBuilder Facet::FacetedBodyCollection::CreateSTLImportBuilder @endlink <br> Default values
SubdivideFacetBodyBuilder	This class provides functionality to subdivide the polygons to increase the density of the facet bodies
Features	Provides classes and interfaces for features
PlatformTestNamespace1
TestBlock	Represents a testblock feature in PlatformTestNamespace1 namespace
TestBlockFeatureBuilder	Represents a sheetmetal block feature builder
PlatformTestNamespace2
TestBlock	Represents a testblock feature in PlatformTestNamespace1 namespace
TestBlockFeatureBuilder	Represents a sheetmetal block feature builder
SheetMetal	Provides classes and interfaces for Sheet Metal Features
AeroFlangeBuilder	Represents a Aerospace Sheet Metal Flange Builder
AeroFlatPatternBuilder	Represents a Flat Pattern feature builder
AeroFlatSolidBuilder	Represents a Flat As Solid feature builder
AeroJoggleBuilder	Represents a Aerospace Sheet Metal Joggle Builder
AeroLighteningCutoutBuilder	Represents a @link Features::SheetMetal::AeroLighteningCutoutBuilder Features::SheetMetal::AeroLighteningCutoutBuilder@endlink <br> To create a new instance of this class, use @link Features::SheetMetal::AeroSheetmetalManager::CreateAeroLighteningCutoutBuilder Features::SheetMetal::AeroSheetmetalManager::CreateAeroLighteningCutoutBuilder @endlink <br> Default values
AeroReformBuilder	Represents a Aerospace Sheet Metal REFORM Builder
AeroSheetmetalManager	Provides methods for manipulating the Knowledge Fusion rules in a part To obtain an instance of this class, refer to Features::FeatureCollection Created in NX4.0.0
AeroUnformBuilder	Represents a Aerospace Sheet Metal UNFORM Builder
BeadBuilder	Represents a Bead feature builder
BendBuilder	Represents a Bend feature builder
BendOptions	Represents a Sheetmetal Bend Options class
BendTaperBuilder	Represents a Bend Taper feature builder <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateBendTaperBuilder Features::SheetMetal::SheetmetalManager::CreateBendTaperBuilder @endlink <br> Default values
BreakCornerBuilder	Represents a break corner feature builder
BridgeTransitionBuilder	Represents a Bridge Transition builder To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateBridgeTransitionBuilder Created in NX5.0.2
CleanUpUtilityBuilder	Represents a Clean-Up Utility builder builder <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateCleanUpUtilityBuilder Features::SheetMetal::SheetmetalManager::CreateCleanUpUtilityBuilder @endlink <br> Default values
ClosedCornerBuilder	Represents a Closed corner feature builder
ContourFlangeBuilder	Represents a Contour Flange feature builder
ConvertToSheetmetalBuilder	This is the feature builder for the convert to sheetmetal feature
CornerTreatmentBuilder	Used to manage a builder object for a corner treatment in the flat solid and flat pattern dialogs
DimpleBuilder	Represents a Dimple feature builder
DrawnCutoutBuilder	Represents a Drawn Cutout feature builder
EdgeRipBuilder	Represents a Edge Rip feature builder
EditBendBuilder	Represents a @link Features::EditBend Features::EditBend@endlink builder <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateEditBendBuilder Features::SheetMetal::SheetmetalManager::CreateEditBendBuilder @endlink <br> Created in NX7.5.0
EditCornerBuilder	Represents a @link Features::SheetMetal::EditCornerBuilder Features::SheetMetal::EditCornerBuilder@endlink <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateEditCornerBuilder Features::SheetMetal::SheetmetalManager::CreateEditCornerBuilder @endlink <br> Default values
ExportFlatPatternBuilder	Represents a Export flat pattern builder
FlangeBuilder	Represents a Flange feature builder
FlatPatternBuilder	Represents a Flat Pattern feature builder
FlatSolidBuilder	Represents a Flat As Solid feature builder
FlexibleCableBuilder	Represents a Flexible Cable feature builder
FlexibleCableSegment	Represents a Flexible Cable Segment class
GussetBuilder	Represents a NX Sheet Metal @link Features::Gusset Features::Gusset@endlink builder <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateGussetBuilder Features::SheetMetal::SheetmetalManager::CreateGussetBuilder @endlink <br> Default values
HemFlangeBuilder	Represents a Features::HemFlange builder To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateHemFlangeFeatureBuilder Created in NX5.0.0
JogBuilder	Represents a Jog feature builder
LoftedFlangeBuilder	Represents a Lofted Flange feature builder
LouverBuilder	Represents a louver feature builder
MetaformBuilder	Represents a @link Features::Metaform Features::Metaform@endlink builder <br> To create a new instance of this class, use @link Features::SheetMetal::SheetmetalManager::CreateMetaformBuilder Features::SheetMetal::SheetmetalManager::CreateMetaformBuilder @endlink <br> Default values
MigratedPanelBuilder	Represents an I-DEAS Migrated Panel feature builder This builder cannot be instantiated separately
MiterOptions	Represents a Miter Data Options builder
NormalCutoutBuilder	Represents a NormalCutout feature builder
RebendBuilder	The Rebend feature class
ResizeBendAngleBuilder	Represents a Features::ResizeBendAngle builder To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateResizeBendAngleBuilder Created in NX5.0.0
ResizeBendRadiusBuilder	Represents a ResizeBendRadius feature builder
ResizeNeutralFactorBuilder	Represents a Resize Neutral Factor Builder To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateResizeNeutralFactorBuilder Created in NX5.0.0
SheetmetalBaseBuilder	Represents a Sheet Metal Feature Builder to be used in the creation and modification of features
SheetmetalBendParameters	This structure contains the bend parameters for a Sheet Metal bend area
SheetMetalFromSolidBuilder	Represents a Features::SheetMetalFromSolid builder (Sheet Metal from Solid)
SheetmetalManager	Represents an object that manages sheetmetal features To obtain an instance of this class, refer to Features::FeatureCollection Created in NX4.0.0
SMBoundaryConditionBuilder	Represents a Boundary condition object for Metaform
SMBoundaryConditionBuilderList	Represents a list of objects
SolidPunchBuilder	Represents a Features::SheetMetal::SolidPunchBuilder To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateSolidPunchBuilder Created in NX5.0.0
TabBuilder	Represents a Tab feature builder
ThreeBendCornerBuilder	The Three Bend Corner feature class
UnbendBuilder	The Unbend feature class
ShipDesign	Provides classes and interfaces for Ship Design
AlongGuideCut	Represents a corner cut feature To create or edit an instance of this class, use Features::ShipDesign::AlongGuideCutBuilder Created in NX8.5.0
AlongGuideCutBuilder	Represents a @link Features::ShipDesign::AlongGuideCut Features::ShipDesign::AlongGuideCut@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateAlongGuideCutBuilder Features::ShipCollection::CreateAlongGuideCutBuilder @endlink <br> Default values
AnchorPoint	Represents a Features::ShipDesign::AnchorPoint builder
AnchorPointList	Represents a list of objects
BuiltUpBlockBuilder	Represents a Features::ShipDesign::BuiltUpBlockBuilder
BuiltUpManModeBuilder	This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for one or more components
BuiltUpOffsetBuilder	Represents a BuiltUpOffsetBuilder .This class is for splitting ship built-up solidbodies
BulkHeadListItemBuilder	Represents a Features::ShipDesign::BulkHeadListItemBuilder
BulkHeadListItemBuilderList	Represents a list of objects
BulkHeads	Represents a bulk head feature To create or edit an instance of this class, use Features::ShipDesign::BulkHeadsBuilder Created in NX5.0.0
BulkHeadsBuilder	Represents a @link Features::ShipDesign::BulkHeads Features::ShipDesign::BulkHeads@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateBulkHeadsBuilder Features::ShipCollection::CreateBulkHeadsBuilder @endlink <br> Created in NX5.0.0
CompareModeBuilder	This class is used to compare between the two Shipbuilding modes of Design and Manufacturing
ConceptFromSpreadsheet	Represents a concept from spreadsheet feature To create or edit an instance of this class, use Features::ShipDesign::ConceptFromSpreadsheetBuilder Created in NX8.5.0
ConceptFromSpreadsheetBuilder	Represents a @link Features::ShipDesign::ConceptFromSpreadsheet Features::ShipDesign::ConceptFromSpreadsheet@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateConceptFromSpreadsheetBuilder Features::ShipCollection::CreateConceptFromSpreadsheetBuilder @endlink <br> Default values
CopyPasteNewBuilder	Represents a Features::ShipDesign::CopyPasteNewBuilder It is used in Ship Building Application
CornerCut	Represents a corner cut feature To create or edit an instance of this class, use Features::ShipDesign::CornerCutBuilder Created in NX8.5.0
CornerCutBuilder	Builder used to create or edit a Features::ShipDesign::CornerCut feature
CornerCutListItemBuilder	Used to supply the list of corner cut locations and seam curves to the @link Features::ShipDesign::CornerCutBuilder Features::ShipDesign::CornerCutBuilder@endlink <br> To create a new instance of this class, use @link Features::ShipCollection::CreateCornerCutListitemBuilder Features::ShipCollection::CreateCornerCutListitemBuilder @endlink <br> Created in NX8.5.0
CornerCutListItemBuilderList	Represents a list of objects
CustomBracket	Represents a custom bracket feature To create or edit an instance of this class, use Features::ShipDesign::CustomBracketBuilder Created in NX7.5.0
CustomBracketBuilder	Represents a @link Features::ShipDesign::CustomBracket Features::ShipDesign::CustomBracket@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateCustomBracketBuilder Features::ShipCollection::CreateCustomBracketBuilder @endlink <br> Default values
Cutout2	Represents a cutout2 feature To create or edit an instance of this class, use Features::ShipDesign::Cutout2Builder Created in NX8.0.0
Cutout2Builder	Represents a @link Features::ShipDesign::Cutout2 Features::ShipDesign::Cutout2@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateCutout2Builder Features::ShipCollection::CreateCutout2Builder @endlink <br> Default values
CuttingSideFacesBuilder	Used to create a Features::ShipDesign::CuttingSideFacesBuilder which is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies
Deck	Represents a Deck feature in Basic Design
DeckBuilder	This class is used to create or edit a Features::ShipDesign::Deck feature
DeckListItemBuilder	Represents a DeckListItemBuilder
DeckListItemBuilderList	Represents a list of objects
Decks	Represents a decks feature To create or edit an instance of this class, use Features::ShipDesign::DecksBuilder Created in NX5.0.0
DecksBuilder	Represents a Features::ShipDesign::Decks builder
DeleteSeamBuilder	Used to create a Features::ShipDesign::DeleteSeamBuilder which is used to delete the seams from the ship structural components
DisplaySolidBuilder	This class is used to identify ship structure that is to have a temporary solid display built for it
DvToMvMapping	Represents a plate feature To create or edit an instance of this class, use Features::ShipDesign::DvToMvMappingBuilder Created in NX8.5.0
DvToMvMappingBuilder	Represents a Features::ShipDesign::DvToMvMapping builder
EdgeCut	Represents a edge cut feature To create or edit an instance of this class, use Features::ShipDesign::EdgeCutBuilder Created in NX8.5.0
EdgeCutBuilder	Represents a Features::ShipDesign::EdgeCut builder
EdgeReinforcement	Represents a edge reinforcement feature
EdgeReinforcementBuilder	Represents a Features::ShipDesign::EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature
EditStockBuilder	Used to create a Features::ShipDesign::EditStockBuilder which is used to change the stock information on the basic design features
EditWeldingBuilder	Used to create a Features::ShipDesign::EditWeldingBuilder which is used to change the welding characteristics on the seams in the plate systems
EndCut	Represents an end cut feature To create or edit an instance of this class, use Features::ShipDesign::EndCutBuilder Created in NX8.0.0
EndCutBuilder	Represents a Features::ShipDesign::EndCut builder
ExamineSteelFeatureBuilder	Represents the examine steel feature builder to examine steel feature
ExcessMaterial	Represents a excess material feature To create or edit an instance of this class, use Features::ShipDesign::ExcessMaterialBuilder Created in NX7.5.0
ExcessMaterialBuilder	Represents a Features::ShipDesign::ExcessMaterial builder
FeatureParmsBuilder	This class is used to create or edit the information shared among all Ship Design features
FeaturesBatchOperationBuilder	Use this to cycle through the assembly components and perform the operation globally on the specified feature type
FeaturesToTagBuilder	This class is used to add an attribute to profile features that have been modified by the user to display a 'Metal to Metal' design 'feature'
FilterBuilder	A builder that allows the user to define common properties of ship objects and then add objects of similar properties to the select object list
FrameBarOut	Represents a FrameBarOut To create or edit an instance of this class, use Features::ShipDesign::FrameBarOutBuilder Created in NX5.0.0
FrameBarOutBuilder	Represents a Features::ShipDesign::FrameBarOut builder
GenericPlateSystem	Represents a Generic Plate System feature
GenericPlateSystemBuilder	This class is used to create or edit a Features::ShipDesign::GenericPlateSystem feature
Hull	Represents a Hull feature
HullBuilder	This class is used to create or edit a Features::ShipDesign::Hull feature
InsertFramesBuilder	Represents a @link Features::ShipDesign::InsertFramesBuilder Features::ShipDesign::InsertFramesBuilder@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateInsertFramesBuilder Features::ShipCollection::CreateInsertFramesBuilder @endlink <br> Created in NX5.0.0
InsertSheetBody	Represents a insert sheet body feature To create or edit an instance of this class, use Features::ShipDesign::InsertSheetBodyBuilder Created in NX5.0.0
InsertSheetBodyBuilder	Represents a @link Features::ShipDesign::InsertSheetBody Features::ShipDesign::InsertSheetBody@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateInsertSheetBodyBuilder Features::ShipCollection::CreateInsertSheetBodyBuilder @endlink <br> Created in NX5.0.0
InverseBendingLines	Represents a inverse bending lines feature To create or edit an instance of this class, use Features::ShipDesign::InverseBendingLinesBuilder Created in NX8.0.0
InverseBendingLinesBuilder	Used to create or edit a Features::ShipDesign::InverseBendingLines feature
ItFrameListItemBuilder	Represents a Features::ShipDesign::ItFrameListItemBuilder
ItFrameListItemBuilderList	Represents a list of objects
ItFrames	Represents a Inter Transverse Frame feature To create or edit an instance of this class, use Features::ShipDesign::ItFramesBuilder Created in NX5.0.0
ItFramesBuilder	Represents a @link Features::ShipDesign::ItFrames Features::ShipDesign::ItFrames@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateItFramesBuilder Features::ShipCollection::CreateItFramesBuilder @endlink <br> Created in NX5.0.0
KnuckledProfiles	Represents a knuckled profiles manufacturing preparation feature To create or edit an instance of this class, use Features::ShipDesign::KnuckledProfilesBuilder Created in NX5.0.3
KnuckledProfilesBuilder	Represents a @link Features::ShipDesign::KnuckledProfiles Features::ShipDesign::KnuckledProfiles@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateKnuckledProfilesBuilder Features::ShipCollection::CreateKnuckledProfilesBuilder @endlink <br> Created in NX5.0.3
LongitudinalBulkhead	Represents a Longitudinal Bulkhead feature
LongitudinalBulkheadBuilder	This class is used to create or edit a Features::ShipDesign::LongitudinalBulkhead feature
MainDimensions	Represents a main dimensions feature To create or edit an instance of this class, use Features::ShipDesign::MainDimensionsBuilder Created in NX5.0.0
MainDimensionsBuilder	Represents a Features::ShipDesign::MainDimensions builder
ManufacturingDataBuilder	This class is used to generate Manufacturing data
ManufacturingOut	Represents a ManufacturingOut To create or edit an instance of this class, use Features::ShipDesign::ManufacturingOutBuilder Created in NX5.0.0
ManufacturingOutBuilder	Represents a @link Features::ShipDesign::ManufacturingOut Features::ShipDesign::ManufacturingOut@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateManufacturingOutBuilder Features::ShipCollection::CreateManufacturingOutBuilder @endlink <br> Created in NX5.0.0
ManufacturingPreparation	Represents a manufacturing preparation feature To create or edit an instance of this class, use Features::ShipDesign::ManufacturingPreparationBuilder Created in NX8.0.2
ManufacturingPreparationBuilder	This builder is used to adds attributes to the part and body identifying manufacturing related data
ManufacturingStockBuilder	Represents a Features::ShipDesign::ManufacturingStockBuilder builder
MarkingLine	Represents a marking line feature
MarkingLineBuilder	Represents a MarkingLine Feature builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateMarkingLineBuilder Features::ShipCollection::CreateMarkingLineBuilder @endlink <br> Created in NX5.0.0
MarkingLineDesign	Represents a marking line feature
MarkingLineDesignBuilder	Represents a new MarkingLine Feature builder
OrientationAngleMethodsBuilder	This class defines the method of angle definition used in the definition of the region's orientation
OrientationDefinition	Represents a Orientation SubObject
OrientationDefinitionBuilder	This class defines the top level object for use in definining the orientation of stiffeners and edge reinforcements
OrientationPointMethodsBuilder	This class is used to define the boundary of the regions when definining the orientation of a profile
OrientationRegionItemBuilder	This class defines each region of the orientation
OrientationRegionItemBuilderList	Represents a list of objects
PenetrationAssociationBuilder	Represents a Features::ShipDesign::PenetrationAssociationBuilder builder To create a new instance of this class, use Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationAssociationBuilder Created in NX8.0.0
PenetrationAttachment	Represents the Penetration Attachment object
PenetrationCutoutBuilder	Represents a @link Features::ShipDesign::PenetrationRequest Features::ShipDesign::PenetrationRequest@endlink builder <br> To create a new instance of this class, use @link Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationCutoutBuilder Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationCutoutBuilder @endlink <br> Default values
PenetrationFolder	Represents the Penetration Folder object
PenetrationList	Represents the Penetration List object
PenetrationManager	Contains the collection objects for creating and iterating over Penetration Request Properties objects
PenetrationRequest	Represents the Penetration Request object
PenetrationRequestBuilder	Represents a @link Features::ShipDesign::PenetrationRequest Features::ShipDesign::PenetrationRequest@endlink builder <br> To create a new instance of this class, use @link Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationRequestBuilder Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationRequestBuilder @endlink <br> Default values
PenetrationRequestCollection	Represents a Mechatronics::FunctionObjectCollection To obtain an instance of this class, refer to Features::ShipDesign::PenetrationManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
PenetrationRequestForCutoutBuilder	Represents a Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationRequestForCutoutBuilder Created in NX8.5.0
PenetrationReviewRequestBuilder	Represents a Features::ShipDesign::PenetrationRequest builder To create a new instance of this class, use Features::ShipDesign::PenetrationRequestCollection::CreatePenetrationReviewRequestBuilder Created in NX8.0.0
PenetrationSite	Represents the Penetration Site object
PenetrationUtils	Contains various penetration utility methods To obtain an instance of this class, refer to Features::ShipDesign::PenetrationManager Created in NX8.0.0
Pillar	Represents a Pillar feature To create or edit an instance of this class, use Features::ShipDesign::PillarBuilder Created in NX8.0.0
PillarBuilder	Represents a @link Features::ShipDesign::Pillar Features::ShipDesign::Pillar@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreatePillarBuilder Features::ShipCollection::CreatePillarBuilder @endlink <br> Default values
PillarSystem	Represents a pillar system feature
PillarSystemBuilder	Represents a Features::ShipDesign::PillarSystem builder which is used to create or edit a pillar system feature
PlaneListBuilder	This class is used to place a plane into a list
PlaneListBuilderList	Represents a list of objects
PlanePairBuilder	This class is used to define a pair of planes in a list
Plate	Represents a plate feature To create or edit an instance of this class, use Features::ShipDesign::PlateBuilder Created in NX8.0.0
PlateBuilder	Represents a Features::ShipDesign::Plate builder
PlateChamfer	Represents a plate chamfer feature To create or edit an instance of this class, use Features::ShipDesign::PlateChamferBuilder Created in NX8.0.0
PlateChamferBuilder	Represents a Features::ShipDesign::PlateChamfer builder
PlatePreparation	Represents a ship plate preparation feature To create or edit an instance of this class, use Features::ShipDesign::PlatePreparationBuilder Created in NX8.0.0
PlatePreparationBuilder	Used to create or edit a Features::ShipDesign::PlatePreparation feature
PlateStockBuilder	This builder allows you to define the stock information for plate system features in ship design
PlateSystem	Represents a Plate System feature
PlateSystemBuilder	This class is used to create or edit the information shared between all the Basic Design plate system features in the Ship Design application
PointPairBuilder	This class is used to define a pair of points in a list
Profile	Represents a profile feature To create or edit an instance of this class, use Features::ShipDesign::ProfileBuilder Created in NX7.5.0
ProfileBuilder	Represents a @link Features::ShipDesign::Profile Features::ShipDesign::Profile@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateProfileBuilder Features::ShipCollection::CreateProfileBuilder @endlink <br> Default values
ProfileCutout	Represents a profile cutout feature for NX8
ProfileCutoutBuilder	Represents a @link Features::ShipDesign::ProfileCutout Features::ShipDesign::ProfileCutout@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateProfileCutoutBuilder Features::ShipCollection::CreateProfileCutoutBuilder @endlink <br> Default values
ProfileList	Represents a profile list feature To create or edit an instance of this class, use Features::ShipDesign::ProfileListBuilder Created in NX5.0.0
ProfileListBuilder	Represents a @link Features::ShipDesign::ProfileList Features::ShipDesign::ProfileList@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateProfileListBuilder Features::ShipCollection::CreateProfileListBuilder @endlink <br> Created in NX5.0.0
ProfileSystem	Represents a profile system feature
ProfileSystemBuilder	This class is used to create or edit the information shared between all the Basic Design profile system features in the Ship Design application
ProfileTransition	Represents a profile transition feature To create or edit an instance of this class, use Features::ShipDesign::ProfileTransitionBuilder Created in NX9.0.0
ProfileTransitionBuilder	Builder used to create or edit a Features::ShipDesign::ProfileTransition feature
QualifySketchBuilder	Represents a Features::ShipDesign::QualifySketchBuilder builder
ReadDataSetBuilder	This class will read a data set file from Team Center Created in NX8.5.0
RebaseBuilder	This class is used to synchronize the end cuts from the ones in mfg group to design group
ReferenceLine	Represents a reference line feature
ReferenceLineBuilder	Represents a Features::ShipDesign::ReferenceLine builder
RemoveSplitBuilder	Represents a RemoveSplitBuilder .This class is for removing split features
ReverseSplitBuilder	This class is used to provide the capability to reverse the split interaction between ship structures
RollingLine	Represents a rolling line feature
RollingLineBuilder	Represents a Features::ShipDesign::RollingLine builder
Seam	Represents a ship design seam feature
SeamBlockBuilder	Represents a @link Features::ShipDesign::SeamBlockBuilder Features::ShipDesign::SeamBlockBuilder@endlink <br> To create a new instance of this class, use @link Features::ShipDesign::BuiltUpBlockBuilder::CreateSeamBlockBuilder Features::ShipDesign::BuiltUpBlockBuilder::CreateSeamBlockBuilder @endlink <br> Created in NX9.0.0
SeamBlockBuilderList	Represents a list of objects
SeamBuilder	A Features::ShipDesign::SeamBuilder used to create or edit a ship design Features::ShipDesign::Seam feature
SetModeBuilder	This class is used to set the mode to design or manufacturing
ShellExpansion	Represents a shell expansion feature To create or edit an instance of this class, use Features::ShipDesign::ShellExpansionBuilder Created in NX7.5.0
ShellExpansionBuilder	Represents a @link Features::ShipDesign::ShellExpansion Features::ShipDesign::ShellExpansion@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShellExpansionBuilder Features::ShipCollection::CreateShellExpansionBuilder @endlink <br> Default values
ShellTemplate	Represents a shell template feature
ShellTemplateBuilder	Used to edit or create a Features::ShipDesign::ShellTemplate feature
ShipAttributeHolder	Represents a Features::ShipDesign::ShipAttributeHolder builder This is an abstract class
ShipContainerBuilder	This class is used to specify the "container" part for the Ship Structures application, i.e., that part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly components
ShipCoordinates	Represents a ship coordinates feature Ship Coordinates is not supported in KF
ShipCoordinatesBuilder	Represents a @link Features::ShipDesign::ShipCoordinates Features::ShipDesign::ShipCoordinates@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipCoordinatesBuilder Features::ShipCollection::CreateShipCoordinatesBuilder @endlink <br> Default values
ShipCutout	Represents a ship cutout feature To create or edit an instance of this class, use Features::ShipDesign::ShipCutoutBuilder Created in NX7.5.0
ShipCutoutBuilder	Represents a @link Features::ShipDesign::ShipCutout Features::ShipDesign::ShipCutout@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipCutoutBuilder Features::ShipCollection::CreateShipCutoutBuilder @endlink <br> Default values
ShipDesignPreferencesBuilder	Represents a Features::ShipDesign::ShipDesignPreferencesBuilder which is used to change default object display settings for ship structures
ShipDesignVersionUpBuilder	Represents a Features::ShipDesign::ShipDesignVersionUpBuilder builder
ShipEndCut	Represents a ship end cut feature To create or edit an instance of this class, use Features::ShipDesign::ShipEndCutBuilder Created in NX7.5.0
ShipEndCutBuilder	Represents a @link Features::ShipDesign::ShipEndCut Features::ShipDesign::ShipEndCut@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipEndCutBuilder Features::ShipCollection::CreateShipEndCutBuilder @endlink <br> Default values
ShipFeatureConverter	This class is used to convert/upgrade legacy Ship Design features
ShipFlatPattern	Represents a ship flat pattern feature To create or edit an instance of this class, use Features::ShipDesign::ShipFlatPatternBuilder
ShipFlatPatternBuilder	Represents a @link Features::ShipDesign::ShipFlatPattern Features::ShipDesign::ShipFlatPattern@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipFlatPatternBuilder Features::ShipCollection::CreateShipFlatPatternBuilder @endlink <br>
ShipIntersections	Represents a ship intersection feature To create or edit an instance of this class, use Features::ShipDesign::ShipIntersectionsBuilder Created in NX7.5.0
ShipIntersectionsBuilder	Represents a @link Features::ShipDesign::ShipIntersections Features::ShipDesign::ShipIntersections@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipIntersectionsBuilder Features::ShipCollection::CreateShipIntersectionsBuilder @endlink <br> Default values
ShipProfileCutout	Represents a profile cutout feature for NX75 using sketch expression modifier block
ShipProfileCutoutBuilder	Represents a Features::ShipDesign::ProfileCutout builder for editing legacy(NX75) profile cutout feature
ShipSection	Represents a ship section feature To create or edit an instance of this class, use Features::ShipDesign::ShipSectionBuilder Created in NX7.5.0
ShipSectionBuilder	Represents a @link Features::ShipDesign::ShipSection Features::ShipDesign::ShipSection@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShipSectionBuilder Features::ShipCollection::CreateShipSectionBuilder @endlink <br> Default values
SmartRule	Represents a smart rule feature
SmartRuleBuilder	Represents a @link Features::ShipDesign::SmartRule Features::ShipDesign::SmartRule@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSmartRuleBuilder Features::ShipCollection::CreateSmartRuleBuilder @endlink <br> Created in NX8.0.0
SplitProfilePlateBuilder	Represents a @link SplitProfilePlateBuilder SplitProfilePlateBuilder@endlink .This class is for splitting ship profile/plate solidbodies <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSplitProfilePlateBuilder Features::ShipCollection::CreateSplitProfilePlateBuilder @endlink <br> Default values
SplitStandardPart	Represents a split standard part feature
SplitStandardPartBuilder	Represents a @link SplitStandardPartBuilder SplitStandardPartBuilder@endlink .This class is for splitting ship standard part <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSplitStandardPartBuilder Features::ShipCollection::CreateSplitStandardPartBuilder @endlink <br> Default values
StandardPart	Represents a standard part feature
StandardPartFrameworkBuilder	Represents the standard part framework builder to add or edit ship standard part
StandardPartItemBuilder	Represents the ship standard part item builder
StandardPartItemBuilderList	Represents a list of objects
StandardPartSCAssist	Represents To create or edit an instance of this class, use Features::ShipDesign::StandardPartFrameworkBuilder Created in NX9.0.0
SteelCollarPlate	Represents a collar plate steel feature To create or edit an instance of this class, use Features::ShipDesign::SteelCollarPlateBuilder Created in NX7.5.0
SteelCollarPlateBuilder	Represents a @link Features::ShipDesign::SteelCollarPlate Features::ShipDesign::SteelCollarPlate@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSteelCollarPlateBuilder Features::ShipCollection::CreateSteelCollarPlateBuilder @endlink <br> Default values
SteelDistribution	Represents a steel distribution feature To create or edit an instance of this class, use Features::ShipDesign::SteelDistributionBuilder Created in NX5.0.0
SteelDistributionBuilder	Represents a @link Features::ShipDesign::SteelDistribution Features::ShipDesign::SteelDistribution@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSteelDistributionBuilder Features::ShipCollection::CreateSteelDistributionBuilder @endlink <br> Created in NX5.0.0
SteelFeatureSpreadsheetBuilder	Represents a Features::ShipDesign::SteelFeatureSpreadsheetBuilder builder
SteelInsulation	Represents a steel insulation feature
SteelInsulationBoundaryBuilder	Represents a Steel Insulation Boundary builder
SteelInsulationBoundaryBuilderList	Represents a list of objects
SteelInsulationBuilder	Represents a builder that is used to create or edit a Features::ShipDesign::SteelInsulation feature
SteelSupport	Represents a steel support feature To create or edit an instance of this class, use Features::ShipDesign::SteelSupportBuilder Created in NX7.5.0
SteelSupportBuilder	Represents a @link Features::ShipDesign::SteelSupport Features::ShipDesign::SteelSupport@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSteelSupportBuilder Features::ShipCollection::CreateSteelSupportBuilder @endlink <br> Default values
SteelVentHoles	Represents a ship vent holes feature To create or edit an instance of this class, use Features::ShipDesign::SteelVentHolesBuilder Created in NX7.5.0
SteelVentHolesBuilder	Represents a @link Features::ShipDesign::SteelVentHoles Features::ShipDesign::SteelVentHoles@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateSteelVentHolesBuilder Features::ShipCollection::CreateSteelVentHolesBuilder @endlink <br> Default values
Stiffener	Represents a stiffener feature To create or edit an instance of this class, use Features::ShipDesign::StiffenerBuilder Created in NX8.0.0
StiffenerBuilder	Represents a @link Features::ShipDesign::Stiffener Features::ShipDesign::Stiffener@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateStiffenerBuilder Features::ShipCollection::CreateStiffenerBuilder @endlink <br> Default values
StiffenerBySupportPathBuilder	This class defines the builder to collect stiffener by support path data for Stiffener feature
StiffenerLimitBuilder	This class defines the path limit method used by a Stiffener or Edge Reinforcement feature
StiffenerStockBuilder	This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature
StiffenerSystem	Represents a stiffener system feature
StiffenerSystemBuilder	This class is used to create or edit a Features::ShipDesign::StiffenerSystem feature
SubSystemBuilder	This class is used to edit the Sub System Definition of a Features::ShipDesign::SubSystems feature
SubSystemBuilderList	Represents a list of objects
SubSystems	Represents a sub systems feature
SubSystemsBuilder	This class is used to edit a Features::ShipDesign::SubSystems feature
SynchronizeDesignViewBuilder	This class is used to synchronize body features from design view to manufacturing view
ThicknessDirectionBuilder	This class allows you to define the thickness direction for plate system features in Ship Basic Design and and for grid planes in Ship Concept Design
TraceLines	Represents a trace lines feature To create or edit an instance of this class, use Features::ShipDesign::TraceLinesBuilder Created in NX7.5.0
TraceLinesBuilder	Represents a @link Features::ShipDesign::TraceLines Features::ShipDesign::TraceLines@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateTraceLinesBuilder Features::ShipCollection::CreateTraceLinesBuilder @endlink <br> Default values
TransFrame	Represents a TransVerse Frame feature To create or edit an instance of this class, use Features::ShipDesign::TransFrameBuilder Created in NX5.0.0
TransFrameBuilder	Represents a @link Features::ShipDesign::TransFrame Features::ShipDesign::TransFrame@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateTransFrameBuilder Features::ShipCollection::CreateTransFrameBuilder @endlink <br> Created in NX5.0.0
TransFrameListItemBuilder	Represents a Features::ShipDesign::TransFrameListItemBuilder
TransFrameListItemBuilderList	Represents a list of objects
TransitionBuilder	This is to create a Features::ShipDesign::TransitionBuilder which is used to create Detail Design elements from Basic Design elements
TransverseBulkhead	Represents a Transverse Bulkhead feature
TransverseBulkheadBuilder	This class is used to create or edit a Features::ShipDesign::TransverseBulkhead feature
UpdateShipLibrary	Represents a update ship library feature To create or edit an instance of this class, use Features::ShipDesign::UpdateShipLibraryBuilder Created in NX5.3.0
UpdateShipLibraryBuilder	Represents a @link Features::ShipDesign::UpdateShipLibrary Features::ShipDesign::UpdateShipLibrary@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateUpdateShipLibraryBuilder Features::ShipCollection::CreateUpdateShipLibraryBuilder @endlink <br> Default values
VentHolesMarking	Represents a vent holes marking feature To create or edit an instance of this class, use Features::ShipDesign::VentHolesMarkingBuilder Created in NX5.0.3
VentHolesMarkingBuilder	Represents a @link Features::ShipDesign::VentHolesMarking Features::ShipDesign::VentHolesMarking@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateVentHolesMarkingBuilder Features::ShipCollection::CreateVentHolesMarkingBuilder @endlink <br> Created in NX5.0.3
VentilationHoles2	Represents a ventilation holes2 feature To create or edit an instance of this class, use Features::ShipDesign::VentilationHoles2Builder Created in NX8.0.0
VentilationHoles2Builder	Represents a @link Features::ShipDesign::VentilationHoles2 Features::ShipDesign::VentilationHoles2@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateVentilationHoles2Builder Features::ShipCollection::CreateVentilationHoles2Builder @endlink <br> Default values
VerifyPenetrationBuilder	Represents a Features::ShipDesign::VerifyPenetrationBuilder builder To create a new instance of this class, use Features::ShipDesign::PenetrationRequestCollection::CreateVerifyPenetrationBuilder Created in NX8.5.0
WeldCut	Represents a weld cut feature To create or edit an instance of this class, use Features::ShipDesign::WeldCutBuilder Created in NX7.5.0
WeldCut2	Represents a weld cut2 feature To create or edit an instance of this class, use Features::ShipDesign::WeldCut2Builder Created in NX8.0.1
WeldCut2Builder	Represents a @link Features::ShipDesign::WeldCut2 Features::ShipDesign::WeldCut2@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateWeldCut2Builder Features::ShipCollection::CreateWeldCut2Builder @endlink <br> Default values
WeldCutBuilder	Represents a @link Features::ShipDesign::WeldCut Features::ShipDesign::WeldCut@endlink builder <br> To create a new instance of this class, use @link Features::ShipCollection::CreateWeldCutBuilder Features::ShipCollection::CreateWeldCutBuilder @endlink <br> Default values
YFrameBuilder	Represents a @link Features::ShipDesign::YFrameBuilder Features::ShipDesign::YFrameBuilder@endlink <br> To create a new instance of this class, use @link Features::ShipCollection::CreateYFrameBuilder Features::ShipCollection::CreateYFrameBuilder @endlink <br> Created in NX5.0.0
ZFrameBuilder	Represents a @link Features::ShipDesign::ZFrameBuilder Features::ShipDesign::ZFrameBuilder@endlink <br> To create a new instance of this class, use @link Features::ShipCollection::CreateZFrameBuilder Features::ShipCollection::CreateZFrameBuilder @endlink <br> Created in NX5.0.0
Subdivision	Provides classes and interfaces for Subdivision Body feature
CageManipulatorData	Subdivision cage manipulation tool
ObjectMoveData	Contains object movement information
ObjectSelectionData	Contains object selection information
SelectCageObjectData	Represents subdivision cage topology object selection
StartSymmetricModelingBuilder	Represents a Features::Subdivision::StartSymmetricModelingBuilder builder To create a new instance of this class, use Features::Subdivision::SubdivisionBodyCollection::CreateStartSymmetricModelingBuilder Created in NX9.0.0
SubdivisionBody	Represents a subdivision body feature
SubdivisionBodyCollection	Represents a collection of subdivision body feature tools
iterator	Iterator for accessing the contents of the collection
SubdivisionBridgeFaceBuilder	Represents a Features::Subdivision::SubdivisionBridgeFaceBuilder builder
SubdivisionDeleteFaceBuilder	Represents a Features::Subdivision::SubdivisionDeleteFaceBuilder builder
SubdivisionExtrudeCageBuilder	Represents a Features::Subdivision::SubdivisionExtrudeCageBuilder builder
SubdivisionFillBuilder	Represents a Features::Subdivision::SubdivisionFillBuilder builder
SubdivisionMergeFaceBuilder	Represents a Features::Subdivision::SubdivisionMergeFaceBuilder builder
SubdivisionPrimitiveShapeBuilder	Represents a Features::Subdivision::SubdivisionPrimitiveShapeBuilder builder
SubdivisionProjectCageBuilder	Represents a @link Features::Subdivision::SubdivisionProjectCageBuilder Features::Subdivision::SubdivisionProjectCageBuilder@endlink builder <br> To create a new instance of this class, use @link Features::Subdivision::SubdivisionBodyCollection::CreateSubdivisionProjectCageBuilder Features::Subdivision::SubdivisionBodyCollection::CreateSubdivisionProjectCageBuilder @endlink <br> Default values
SubdivisionSetContinuityBuilder	Represents a Features::Subdivision::SubdivisionSetContinuityBuilder builder
SubdivisionSetWeightBuilder	Represents a Features::Subdivision::SubdivisionSetWeightBuilder builder
SubdivisionSplitFaceBuilder	Represents a Features::Subdivision::SubdivisionSplitFaceBuilder builder
SubdivisionSubdivideFaceBuilder	Represents a Features::Subdivision::SubdivisionSubdivideFaceBuilder builder
TransformCageData	Represents a Features::Subdivision::TransformCageData builder
VehicleDesign	Provides classes and interfaces for Vehicle Design
AllAroundVision	Represents an all-around vision feature To create or edit an instance of this class, use Features::VehicleDesign::AllAroundVisionBuilder Created in NX8.5.0
AllAroundVisionBuilder	A Features::VehicleDesign::AllAroundVisionBuilder used to create or edit a vehicle design Features::VehicleDesign::AllAroundVision feature
BaseDataBuilder	Represents a Features::VehicleDesign::BaseDataBuilder
BaseDataDriverBuilder	Represents a Features::VehicleDesign::BaseDataDriverBuilder
BaseDataImportExportBuilder	Represents a Features::VehicleDesign::BaseDataImportExportBuilder builder used to import and export expressions from and to a spreadsheet
BaseDataLoadingBuilder	Represents a Features::VehicleDesign::BaseDataLoadingBuilder
BaseDataLoadingWheelBuilder	Represents a Features::VehicleDesign::BaseDataLoadingWheelBuilder
BaseDataPassengerBuilder	Represents a Features::VehicleDesign::BaseDataPassengerBuilder
BaseDataWheelBuilder	Represents a Features::VehicleDesign::BaseDataWheelBuilder
BumperPendulum	Represents a bumper pendulum feature To create or edit an instance of this class, use Features::VehicleDesign::BumperPendulumBuilder Created in NX8.5.0
BumperPendulumBuilder	Represents a @link Features::VehicleDesign::BumperPendulum Features::VehicleDesign::BumperPendulum@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateBumperPendulumBuilder Features::VehicleDesignCollection::CreateBumperPendulumBuilder @endlink <br> Default values
CloseRangeBlindVolumeListItemBuilder	Represents the builder to create blind volume list item used for close range visibility
CloseRangeCameraListItemBuilder	Represents the builder to create camera list item used for close range visibility
CloseRangeCameraListItemBuilderList	Represents a list of objects
CloseRangeDemoCylinderListItemBuilder	Represents the builder to create demo cylinder list item used for close range visibility
CloseRangeDemoCylinderListItemBuilderList	Represents a list of objects
CloseRangeVisibility	Represents a close range visibility feature To create or edit an instance of this class, use Features::VehicleDesign::CloseRangeVisibilityBuilder Created in NX8.5.0
CloseRangeVisibilityBuilder	The builder to create close range visibility feature
CrashBarrier	Represents a crash barrier feature To create or edit an instance of this class, use Features::VehicleDesign::CrashBarrierBuilder Created in NX8.5.0
CrashBarrierBuilder	Represents a Features::VehicleDesign::CrashBarrier builder to create and edit a vehicle design crash barrier
DynamicCurb	Represents a dynamic curb feature To create or edit an instance of this class, use Features::VehicleDesign::DynamicCurbBuilder Created in NX8.5.0
DynamicCurbBuilder	Represents a @link Features::VehicleDesign::DynamicCurb Features::VehicleDesign::DynamicCurb@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateDynamicCurbBuilder Features::VehicleDesignCollection::CreateDynamicCurbBuilder @endlink <br> Default values
GroundClearance	Represents a ground clearance feature
GroundClearanceBuilder	Represents a Features::VehicleDesign::GroundClearance builder
HeadImpact	Represents a head impact feature
HeadImpactAPillar	Represents a head impact a-pillar feature
HeadImpactAPillarBuilder	Represents a Features::VehicleDesign::HeadImpactAPillarBuilder
HeadImpactAPillarDetailBuilder	Represents a Features::VehicleDesign::HeadImpactAPillarDetailBuilder
HeadImpactAPillarWizardBuilder	Represents a Features::VehicleDesign::HeadImpactAPillarWizardBuilder
HeadImpactBPillar	Represents a head impact b-pillar feature
HeadImpactBPillarBuilder	Represents a Features::VehicleDesign::HeadImpactBPillarBuilder
HeadImpactBPillarDetailBuilder	Represents a Features::VehicleDesign::HeadImpactBPillarDetailBuilder
HeadImpactBPillarWizardBuilder	Represents a Features::VehicleDesign::HeadImpactBPillarWizardBuilder
HeadImpactBuilder	Represents a Features::VehicleDesign::HeadImpactBuilder
HeadImpactFrontHeader	Represents a head impact front header feature
HeadImpactFrontHeaderBuilder	Represents a Features::VehicleDesign::HeadImpactFrontHeaderBuilder
HeadImpactFrontHeaderDetailBuilder	Represents a Features::VehicleDesign::HeadImpactFrontHeaderDetailBuilder
HeadImpactFrontHeaderWizardBuilder	Represents a Features::VehicleDesign::HeadImpactFrontHeaderWizardBuilder
HeadImpactOPillar	Represents a head impact side rail feature
HeadImpactOPillarBuilder	Represents a Features::VehicleDesign::HeadImpactOPillarBuilder
HeadImpactOPillarDetailBuilder	Represents a Features::VehicleDesign::HeadImpactOPillarDetailBuilder
HeadImpactOPillarWizardBuilder	Represents a Features::VehicleDesign::HeadImpactOPillarWizardBuilder
HeadImpactOtherRail	Represents a head impact additional side rail feature
HeadImpactOtherRailBuilder	Represents a Features::VehicleDesign::HeadImpactOtherRailBuilder
HeadImpactOtherRailDetailBuilder	Represents a Features::VehicleDesign::HeadImpactOtherRailDetailBuilder
HeadImpactOtherRailWizardBuilder	Represents a Features::VehicleDesign::HeadImpactOtherRailWizardBuilder
HeadImpactRearHeader	Represents a head impact rear header feature
HeadImpactRearHeaderBuilder	Represents a Features::VehicleDesign::HeadImpactRearHeaderBuilder
HeadImpactRearHeaderDetailBuilder	Represents a Features::VehicleDesign::HeadImpactRearHeaderDetailBuilder
HeadImpactRearHeaderWizardBuilder	Represents a Features::VehicleDesign::HeadImpactRearHeaderWizardBuilder
HeadImpactRPillar	Represents a head impact rear pillar feature
HeadImpactRPillarBuilder	Represents a Features::VehicleDesign::HeadImpactRPillarBuilder
HeadImpactRPillarDetailBuilder	Represents a Features::VehicleDesign::HeadImpactRPillarDetailBuilder
HeadImpactRPillarWizardBuilder	Represents a Features::VehicleDesign::HeadImpactRPillarWizardBuilder
HeadImpactSideRail	Represents a head impact side rail feature
HeadImpactSideRailBuilder	Represents a Features::VehicleDesign::HeadImpactSideRailBuilder
HeadImpactSideRailDetailBuilder	Represents a Features::VehicleDesign::HeadImpactSideRailDetailBuilder
HeadImpactSideRailWizardBuilder	Represents a Features::VehicleDesign::HeadImpactSideRailWizardBuilder
HeadImpactUpperRoof	Represents a head impact upper roof feature
HeadImpactUpperRoofBuilder	Represents a Features::VehicleDesign::HeadImpactUpperRoofBuilder
HeadImpactUpperRoofDetailBuilder	Represents a Features::VehicleDesign::HeadImpactUpperRoofDetailBuilder
HeadImpactUpperRoofWizardBuilder	Represents a Features::VehicleDesign::HeadImpactUpperRoofWizardBuilder
HoodVisibility	Represents a hood visibility spline feature To create or edit an instance of this class, use Features::VehicleDesign::HoodVisibilityBuilder Created in NX6.0.0
HoodVisibilityBuilder	Represents a @link Features::VehicleDesign::HoodVisibility Features::VehicleDesign::HoodVisibility@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateHoodVisibilityBuilder Features::VehicleDesignCollection::CreateHoodVisibilityBuilder @endlink <br> Default values
InnerAngle	Represents an inner angle feature To create or edit an instance of this class, use Features::VehicleDesign::InnerAngleBuilder Created in NX8.5.0
InnerAngleBuilder	Represents a Features::VehicleDesign::InnerAngle builder, used to create or edit inner angle feature
Manikin	Represents a manikin automotive feature To create or edit an instance of this class, use Features::VehicleDesign::ManikinBuilder Created in NX7.5.0
ManikinBuilder	Represents a @link Features::VehicleDesign::Manikin Features::VehicleDesign::Manikin@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateManikinBuilder Features::VehicleDesignCollection::CreateManikinBuilder @endlink <br> Default values
MirrorCertification	Represents a mirror certification feature
MirrorCertificationBuilder	A Features::VehicleDesign::MirrorCertificationBuilder used to create or edit a vehicle design Features::VehicleDesign::MirrorCertification feature
OilPan	Represents a oil pan feature To create or edit an instance of this class, use Features::VehicleDesign::OilPanBuilder Created in NX8.5.0
OilPanBuilder	Represents a Features::VehicleDesign::OilPan builder to create and edit a vehicle design oil pan
PedestrianProtection	Represents a pedestrian protection feature To create or edit an instance of this class, use Features::VehicleDesign::PedestrianProtectionBuilder Created in NX6.0.0
PedestrianProtectionBuilder	Represents a @link Features::VehicleDesign::PedestrianProtection Features::VehicleDesign::PedestrianProtection@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreatePedestrianProtectionBuilder Features::VehicleDesignCollection::CreatePedestrianProtectionBuilder @endlink <br> Default values
PendulumPlacementBuilder	This builder allows you to define the pendulum placement information for bumper pendulum features in vehicle design
ReflectionData	Represents a reflection data feature To create or edit an instance of this class, use Features::VehicleDesign::ReflectionDataBuilder Created in NX6.0.0
ReflectionDataBuilder	Represents a @link Features::VehicleDesign::ReflectionData Features::VehicleDesign::ReflectionData@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateReflectionDataBuilder Features::VehicleDesignCollection::CreateReflectionDataBuilder @endlink <br> Default values
SeatBeltAnchorage	Represents a seat belt anchorage feature To create or edit an instance of this class, use Features::VehicleDesign::SeatBeltAnchorageBuilder Created in NX6.0.0
SeatBeltAnchorageBuilder	Represents a @link Features::VehicleDesign::SeatBeltAnchorage Features::VehicleDesign::SeatBeltAnchorage@endlink builder <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateSeatBeltAnchorageBuilder Features::VehicleDesignCollection::CreateSeatBeltAnchorageBuilder @endlink <br> Default values
Slope	Represents a Slope feature To create or edit an instance of this class, use Features::VehicleDesign::SlopeBuilder Created in NX8.5.0
SlopeBuilder	The builder to create slope feature
StaticCurb	Represents a static curb feature To create or edit an instance of this class, use Features::VehicleDesign::StaticCurbBuilder Created in NX8.5.0
StaticCurbBuilder	Represents a @link Features::VehicleDesign::StaticCurb Features::VehicleDesign::StaticCurb@endlink builder used to create or edit static curb feature <br> To create a new instance of this class, use @link Features::VehicleDesignCollection::CreateStaticCurbBuilder Features::VehicleDesignCollection::CreateStaticCurbBuilder @endlink <br> Default values
TireEnvelope	Represents a tire envelope feature To create or edit an instance of this class, use Features::VehicleDesign::TireEnvelopeBuilder Created in NX7.5.0
TireEnvelopeBuilder	Represents a builder that is used to edit or create a Features::VehicleDesign::TireEnvelope
VehicleCoordinateSystem	Represents a vehicle coordinate system feature To create or edit an instance of this class, use Features::VehicleDesign::VehicleCoordinateSystemBuilder Created in NX7.0.0
VehicleCoordinateSystemBuilder	Represents a Features::VehicleDesign::VehicleCoordinateSystem builder To create a new instance of this class, use Features::VehicleDesignCollection::CreateVehicleCoordinateSystemBuilder Created in NX7.0.0
VisionPlane	Represents a vision plane feature
VisionPlaneBuilder	Represents a Features::VehicleDesign::VisionPlane builder used to create or edit a Vision Plane
WheelCovering	Represents a wheel covering feature To create or edit an instance of this class, use Features::VehicleDesign::WheelCoveringBuilder Created in NX8.5.0
WheelCoveringBuilder	Represents a Features::VehicleDesign::WheelCovering feature builder for wheel covering surface section checking
WheelFixing	Represents a wheel fixing feature To create or edit an instance of this class, use Features::VehicleDesign::WheelFixingBuilder Created in NX8.5.0
WheelFixingBuilder	Represents a Features::VehicleDesign::WheelFixing builder used to create or edit a vehicle design wheel fixing
WindshieldDatum	Represents a windshield datum feature
WindshieldDatumBuilder	Represents a Features::VehicleDesign::WindshieldDatum builder used to create or edit a Windshield Datum
AdaptiveShell	Represents a adaptive shell feature To create or edit an instance of this class, use Features::AdaptiveShellBuilder Created in NX6.0.0
AdaptiveShellBuilder	Represents a @link Features::AdaptiveShell Features::AdaptiveShell@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateAdaptiveShellBuilder Features::FeatureCollection::CreateAdaptiveShellBuilder @endlink <br> Default values
AddendumSection	Represents an Addendum Section feature To create or edit an instance of this class, use Die::AddendumSectionBuilder Created in NX7.5.0
AddendumSurface	Represents an Addendum Surface feature To create or edit an instance of this class, use Die::AddSurfBuilder Created in NX6.0.0
AdmMoveFace	Represents a ADM Move Face feature To create or edit an instance of this class, use Features::AdmMoveFaceBuilder Created in NX6.0.0
AdmMoveFaceBuilder	Represents a @link Features::AdmMoveFace Features::AdmMoveFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateAdmMoveFaceBuilder Features::FeatureCollection::CreateAdmMoveFaceBuilder @endlink <br> Default values
AdmOffsetRegion	Represents a linear dimension feature To create or edit an instance of this class, use Features::AdmOffsetRegionBuilder Created in NX6.0.0
AdmOffsetRegionBuilder	Represents a @link Features::AdmOffsetRegion Features::AdmOffsetRegion@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateAdmOffsetRegionBuilder Features::FeatureCollection::CreateAdmOffsetRegionBuilder @endlink <br> Default values
AdmResizeFace	Represents an ADM resize face feature To create or edit an instance of this class, use Features::AdmResizeFaceBuilder Created in NX6.0.0
AdmResizeFaceBuilder	Represents a builder for a resize face feature
AestheticFaceBlend	Represents an aesthetic face blend feature To create or edit an instance of this class, use Features::AestheticFaceBlendBuilder Created in NX7.5.0
AestheticFaceBlendBuilder	This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies
AnalyzePocket	Represents a analyze pocket feature
AnalyzePocketBuilder	Represents a Features::AnalyzePocket builder for Analyze Pocket feature
AngularDim	Represents a angular dimension feature To create or edit an instance of this class, use Features::AngularDimBuilder Created in NX6.0.0
AngularDimBuilder	Represents a Features::AngularDim builder To create a new instance of this class, use Features::FeatureCollection::CreateAngularDimensionBuilder Created in NX6.0.0
AOCS	Represents a Offset In Face feature (aka Associative Offset Curve on Surface ) To create or edit an instance of this class, use Features::AOCSBuilder Created in NX4.0.0
AOCSBuilder	Represents a Offset In Face(aka Associative offset curve on face)feature builder
AssemblyCut	Represents a assembly cut feature To create or edit an instance of this class, use Features::AssemblyCutBuilder Created in NX6.0.0
AssemblyCutBuilder	Represents a @link Features::AssemblyCut Features::AssemblyCut@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateAssemblyCutBuilder Features::FeatureCollection::CreateAssemblyCutBuilder @endlink <br> Default values
AssociativeArc	Represents a associative arc feature To create or edit an instance of this class, use Features::AssociativeArcBuilder Created in NX5.0.0
AssociativeArcBuilder	Represents a @link Features::AssociativeArc Features::AssociativeArc@endlink builder <br> To create a new instance of this class, use @link Features::BaseFeatureCollection::CreateAssociativeArcBuilder Features::BaseFeatureCollection::CreateAssociativeArcBuilder @endlink <br> Default values
AssociativeLine	Represents a associative line feature To create or edit an instance of this class, use Features::AssociativeLineBuilder Created in NX5.0.0
AssociativeLineBuilder	Represents a @link Features::AssociativeLine Features::AssociativeLine@endlink builder <br> To create a new instance of this class, use @link Features::BaseFeatureCollection::CreateAssociativeLineBuilder Features::BaseFeatureCollection::CreateAssociativeLineBuilder @endlink <br> Default values
AutomotiveCollection	This class contains the factory method for creating automotive feature builder
iterator	Iterator for accessing the contents of the collection
BaseFeatureCollection	This class contains methods for creating builders for features that are owned by a @link BasePart BasePart@endlink that is not necessarily a Part
iterator	Iterator for accessing the contents of the collection
Bead	Represents a Bead feature To create or edit an instance of this class, use Features::SheetMetal::BeadBuilder Created in NX5.0.0
Bend	Represents a Bend feature To create or edit an instance of this class, use Features::SheetMetal::BendBuilder Created in NX5.0.0
BendTaper	Represents a bend taper feature To create or edit an instance of this class, use Features::SheetMetal::BendTaperBuilder Created in NX6.0.0
BlendCorner	Represents a blend corner feature To create or edit an instance of this class, use Features::BlendCornerBuilder Created in NX9.0.0
BlendCornerBuilder	Represents a Features::BlendCorner builder
BlendPocket	Represents a blend pocket feature
BlendPocketBuilder	Represents a Features::BlendPocket builder for Blend Pocket feature
Block	Represents a block feature
BlockFeatureBuilder	Represents a block feature builder
BodyFeature	Represents a feature on a part that has a body associated with it
BooleanBuilder	Represents a boolean feature builder
BooleanFeature	Represents a boolean feature
BoundedPlane	Represents a bounded plane feature To create or edit an instance of this class, use Features::BoundedPlaneBuilder Created in NX6.0.0
BoundedPlaneBuilder	Represents a Features::BoundedPlane builder To create a new instance of this class, use Features::FeatureCollection::CreateBoundedPlaneBuilder Created in NX6.0.0
BreakCorner	Represents a BreakCorner feature To create or edit an instance of this class, use Features::SheetMetal::BreakCornerBuilder Created in NX5.0.0
Brep	Represents an unparameterized feature An unparameterized feature is obtained from an existing feature
BridgeCurve	Represents a bridge curve feature To create or edit an instance of this class, use Features::BridgeCurveBuilderEx Created in NX5.0.0
BridgeCurveBuilder	Represents a @link Features::BridgeCurve Features::BridgeCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateBridgeCurveBuilder Features::FeatureCollection::CreateBridgeCurveBuilder @endlink <br> Default values
BridgeCurveBuilderEx	Represents a Features::BridgeCurve builder
BridgeSurface	Represents a bridge surface feature To create or edit an instance of this class, use Features::BridgeSurfaceBuilder Created in NX8.0.0
BridgeSurfaceBuilder	Represents a @link Features::BridgeSurface Features::BridgeSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateBridgeSurfaceBuilder Features::FeatureCollection::CreateBridgeSurfaceBuilder @endlink <br> Default values
BridgeTransition	Represents a bridge transition feature To create or edit an instance of this class, use Features::SheetMetal::BridgeTransitionBuilder Created in NX5.0.2
Chamfer	Represents a chamfer feature
ChamferBuilder	Represents the chamfer builder data
ChangeShellThickness	Represents a shell face feature To create or edit an instance of this class, use Features::ChangeShellThicknessBuilder Created in NX6.0.0
ChangeShellThicknessBuilder	Represents a @link Features::ChangeShellThickness Features::ChangeShellThickness@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateChangeShellThicknessBuilder Features::FeatureCollection::CreateChangeShellThicknessBuilder @endlink <br> Default values
CircularBlendCurve	Represents a Circular Blend Curve feature To create or edit an instance of this class, use Features::CircularBlendCurveBuilder Created in NX5.0.0
CircularBlendCurveBuilder	Represents a @link Features::CircularBlendCurve Features::CircularBlendCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCircularBlendCurveBuilder Features::FeatureCollection::CreateCircularBlendCurveBuilder @endlink <br> Default values
ClosedCorner	Represents a ClosedCorner feature To create or edit an instance of this class, use Features::SheetMetal::ClosedCornerBuilder Created in NX5.0.0
Coaxial	Represents a coaxial feature To create or edit an instance of this class, use Features::CoaxialBuilder Created in NX6.0.0
CoaxialBuilder	Represents a @link Features::Coaxial Features::Coaxial@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCoaxialBuilder Features::FeatureCollection::CreateCoaxialBuilder @endlink <br> Default values
ColorFaceBuilder	Represents a Features::ColorFaceBuilder To create a new instance of this class, use Features::FeatureCollection::CreateColorFaceBuilder Created in NX7.0.0
ColorFeatureBuilder	Represents a Features::ColorFeatureBuilder Represents a color feature builder
ColorFeatureGroupBuilder	Represents a Features::ColorFeatureGroupBuilder Represents a color feature group builder
CombineBodyFeature	Represents a boolean feature
CombinedProjection	Represents a combined projection feature To create or edit an instance of this class, use Features::CombinedProjectionBuilder Created in NX6.0.0
CombinedProjectionBuilder	Represents a @link Features::CombinedProjection Features::CombinedProjection@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCombinedProjectionBuilder Features::FeatureCollection::CreateCombinedProjectionBuilder @endlink <br> Default values
CompensateRoughData	Represents a compensate rough curve or compensate rough sheet feature To create or edit an instance of this class, use Die::CompensateRoughDataBuilder Created in NX6.0.0
CompositeCurve	Represents a composite curve feature To create or edit an instance of this class, use Features::CompositeCurveBuilder Created in NX5.0.0
CompositeCurveBuilder	Represents a @link Features::CompositeCurve Features::CompositeCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCompositeCurveBuilder Features::FeatureCollection::CreateCompositeCurveBuilder @endlink <br> Default values
ConcaveFaces	Represents a radius faces feature To create or edit an instance of this class, use Features::ConcaveFacesBuilder Created in NX7.5.0
ConcaveFacesBuilder	Represents a Concave Faces builder
Cone	Represents a cone feature To create or edit an instance of this class, use Features::ConeBuilder Created in NX6.0.0
ConeBuilder	Represents a builder for a cone feature
ContourFlange	Represents a Contour Flange feature To create or edit an instance of this class, use Features::SheetMetal::ContourFlangeBuilder Created in NX5.0.0
ConvertToSheetmetal	Represents a ConvertToSheetmetal feature To create or edit an instance of this class, use Features::SheetMetal::ConvertToSheetmetalBuilder Created in NX5.0.0
Coplanar	Represents a Coplanar feature To create or edit an instance of this class, use Features::CoplanarBuilder Created in NX6.0.0
CoplanarBuilder	Represents a @link Features::Coplanar Features::Coplanar@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCoplanarBuilder Features::FeatureCollection::CreateCoplanarBuilder @endlink <br> Default values
CopyFace	Represents a copy face feature To create or edit an instance of this class, use Features::CopyFaceBuilder Created in NX6.0.0
CopyFaceBuilder	Represents a builder for a copy face feature
CopyPasteBuilder	Represents a Features::CopyPasteBuilder To create a new instance of this class, use Features::FeatureCollection::CreateCopyPasteBuilder2 Created in NX6.0.0
CurveFeature	Represents a curve feature This is an abstract class, and cannot be instantiated
CurveFinderBuilder	Represents a collection of curves and their relationships to other curves in the model Created in NX9.0.0
CurveLength	Represents a curve length feature
CurveLengthBuilder	Represents the CurveLength builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCurvelengthBuilder Features::FeatureCollection::CreateCurvelengthBuilder @endlink <br> Default values
CurveOnSurface	Represents a curve on surface feature To create or edit an instance of this class, use Features::CurveOnSurfaceBuilder Created in NX5.0.0
CurveOnSurfaceBuilder	Curve On Surface builder class
CutFace	Represents a cut face feature To create or edit an instance of this class, use Features::CutFaceBuilder Created in NX6.0.0
CutFaceBuilder	Represents a builder for a cut face feature
Cylinder	Represents a cylinder feature To create or edit an instance of this class, use Features::CylinderBuilder Created in NX5.0.0
CylinderBuilder	Represents a @link Features::Cylinder Features::Cylinder@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateCylinderBuilder Features::FeatureCollection::CreateCylinderBuilder @endlink <br> Default values
DatumAxisBuilder	Represents a datum axis feature builder
DatumAxisFeature	Represents a datum axis feature To create or edit an instance of this class, use Features::DatumAxisBuilder Created in NX3.0.0
DatumBuilder	Represents a builder for datum features
DatumCsys	Represents a Datum Coordinate System feature
DatumCsysBuilder	Represents a datum csys builder To create a new instance of this class, use Features::FeatureCollection::CreateDatumCsysBuilder Created in NX4.0.0
DatumFeature	Represents a Datum feature that is positioned by a set of constraints
DatumPlaneBuilder	Represents a datum plane feature builder
DatumPlaneFeature	Represents a datum plane feature To create or edit an instance of this class, use Features::DatumPlaneBuilder Created in NX3.0.0
DeleteBody	Represents a delete body feature
DeleteBodyBuilder	Represents a Features::DeleteBody builder for Delete Body feature
DeleteCurve	Represents a delete curve feature To create or edit an instance of this class, use Features::DeleteCurveBuilder Created in NX9.0.0
DeleteCurveBuilder	Represents a @link Features::DeleteCurve Features::DeleteCurve@endlink builder <br> To create a new instance of this class, use @link Features::SynchronousCurveCollection::CreateDeleteCurveBuilder Features::SynchronousCurveCollection::CreateDeleteCurveBuilder @endlink <br> Default values
DeleteEdge	Represents a delete edge feature To create or edit an instance of this class, use Features::DeleteEdgeBuilder Created in NX8.0.0
DeleteEdgeBuilder	Represents a builder for a delete edge feature
DeleteFace	Represents a delete face feature , don't use it until nx502 To create or edit an instance of this class, use Features::DeleteFaceBuilder Created in NX5.0.2
DeleteFaceBuilder	Represents a builder for a delete face feature, don't use it until nx502
DesignFeatureCollection	Manages design features
DimensionBuilder	Represents a @link Features::DimensionBuilder Features::DimensionBuilder@endlink <br> The sub-class should create an instance of corresponding object <br> Default values
Dimple	Represents a Dimple feature To create or edit an instance of this class, use Features::SheetMetal::DimpleBuilder Created in NX5.0.0
DivideCurveBuilder	Represents a builder for non-associative divide curve operation
Divideface	Represents a Divideface feature
DividefaceBuilder	Represents a divide face builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateDividefaceBuilder Features::FeatureCollection::CreateDividefaceBuilder @endlink <br> Default values
Draft	Represents a Draft feature
DraftBody	Represents a draft body feature To create or edit an instance of this class, use Features::DraftBodyBuilder Created in NX5.0.0
DraftBodyBuilder	Represents a @link Features::DraftBody Features::DraftBody@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateDraftBodyBuilder Features::FeatureCollection::CreateDraftBodyBuilder @endlink <br> Default values
DraftBuilder	Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature
DraftingSplineBuilder	Sketch Spline builder class
DrawDiePunch	Represents a draw die punch feature
DrawnCutout	Represents a DrawnCutout feature To create or edit an instance of this class, use Features::SheetMetal::DrawnCutoutBuilder Created in NX5.0.0
EdgeBlend	Represents an Edge Blend feature To create or edit an instance of this class, use Features::EdgeBlendBuilder Created in NX5.0.0
EdgeBlendBuilder	Represents a Edge Blend builder
EdgeRip	Represents an EdgeRip feature To create or edit an instance of this class, use Features::SheetMetal::EdgeRipBuilder Created in NX5.0.0
EdgeSymmetry	Represents an edge symmetry feature To create or edit an instance of this class, use Features::EdgeSymmetryBuilder Created in NX7.0.0
EdgeSymmetryBuilder	Represents a @link Features::EdgeSymmetry Features::EdgeSymmetry@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateEdgeSymmetryBuilder Features::FeatureCollection::CreateEdgeSymmetryBuilder @endlink <br> Default values
EditBend	Represents a edit bend feature To create or edit an instance of this class, use Features::SheetMetal::EditBendBuilder Created in NX7.5.0
EditCrossSection	Represents a edit cross section feature
EditCrossSectionBuilder	Represents a @link Features::EditCrossSection Features::EditCrossSection@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateEditCrossSectionBuilder Features::FeatureCollection::CreateEditCrossSectionBuilder @endlink <br> Default values
EditDimensionBuilder	Represents a builder of edit feature dimensions <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateEditDimensionBuilder Features::FeatureCollection::CreateEditDimensionBuilder @endlink <br> Default values
EmbeddedOperationBuilder	Represents an EmbeddedOperationBuilder This is an abstract class, and cannot be instantiated
Emboss	Represents an emboss feature To create or edit an instance of this class, use Features::EmbossBuilder Created in NX4.0.0
EmbossBody	Represents an emboss body feature To create or edit an instance of this class, use Features::EmbossBodyBuilder Created in NX8.5.0
EmbossBodyBuilder	Represents a @link Features::EmbossBody Features::EmbossBody@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateEmbossBodyBuilder Features::FeatureCollection::CreateEmbossBodyBuilder @endlink <br> Default values
EmbossBuilder	Represents an emboss feature builder that creates or edits an emboss feature
EmbossJoggle	Represents a joggle object
EmbossLimit	Represents emboss start and end objects, meaning, targets and end-cap definitions
EmbossProjection	Represents a projection object
EmbossRegion	Represents an emboss region object
EmbossSidewall	Represents an emboss sidewall object
EmbossTaper	Represents a taper object
EmbossTarget	Represents a target object
Enlarge	Represents an enlarge feature To create or edit an instance of this class, use Features::EnlargeBuilder Created in NX6.0.0
EnlargeBuilder	Represents a Features::Enlarge builder
ExtendSheet	Represents an extend sheet feature To create or edit an instance of this class, use Features::ExtendSheetBuilder Created in NX9.0.0
ExtendSheetBuilder	Represents a @link Features::ExtendSheet Features::ExtendSheet@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateExtendSheetBuilder Features::FeatureCollection::CreateExtendSheetBuilder @endlink <br> Default values
Extension	Represents a extension feature To create or edit an instance of this class, use Features::ExtensionBuilder Created in NX8.0.0
ExtensionBuilder	Represents a @link Features::Extension Features::Extension@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateExtensionBuilder Features::FeatureCollection::CreateExtensionBuilder @endlink <br> Default values
ExtractFace	Represents a Extract face feature To create or edit an instance of this class, use Features::ExtractFaceBuilder Created in NX5.0.0
ExtractFaceBuilder	Represents a @link Features::ExtractFace Features::ExtractFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateExtractFaceBuilder Features::FeatureCollection::CreateExtractFaceBuilder @endlink <br> Default values
Extrude	Represents an extrude feature To create or edit an instance of this class, use Features::ExtrudeBuilder Created in NX4.0.0
ExtrudeBuilder	Represents a extrude feature builder
FaceBlend	Represents a Face Blend feature
FaceBlendBuilder	Represents a face blend builder
FaceRecognitionBuilder	Represents a collection of faces and their relationships to other faces in the model Created in NX6.0.0
FaceSheet	Represents a Face Sheet feature To create or edit an instance of this class, use Die::FaceSheetBuilder Created in NX5.0.0
Feature	Represents a feature on a part This is an abstract class, and cannot be instantiated
FeatureBuilder	Represents a Feature Builder to be used in the creation and modification of features
FeatureCollection	Represents a collection of features To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
FeatureGroup	Represents a Features::FeatureGroup Not support KF
FeatureReferencesBuilder	Represents a Features::FeatureReferencesBuilder
FeatureReplayBuilder	Represents a Features::FeatureReplayBuilder builder
FitCurve	Represents a fit curve feature To create or edit an instance of this class, use Features::FitCurveBuilder Created in NX8.5.0
FitCurveBuilder	Represents a @link Features::FitCurve Features::FitCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateFitCurveBuilder Features::FeatureCollection::CreateFitCurveBuilder @endlink <br> Default values
FitSurface	Represents a fit surface feature To create or edit an instance of this class, use Features::FitSurfaceBuilder Created in NX8.5.0
FitSurfaceBuilder	This class will provide the ability to fit surfaces through facet bodies or point sets/groups
Fixed	Represents a Fixed feature To create or edit an instance of this class, use Features::FixedBuilder Created in NX7.0.0
FixedBuilder	Represents a builder for a fixed feature
Flange	Represents a Flange feature To create or edit an instance of this class, use Features::SheetMetal::FlangeBuilder Created in NX5.0.0
FlatPattern	Represents a Flat Solid feature To create or edit an instance of this class, use Features::SheetMetal::FlatPatternBuilder Created in NX5.0.1
ObjectDataCsys	Structure used to return data about objects in the flat pattern
ObjectDataEdge	Structure used to return data about objects in the flat pattern
ObjectDataFace	Structure used to return data about objects in the flat pattern
ObjectDataGeneral	Structure used to return data about objects in the flat pattern
FlatSolid	Represents a Flat Solid feature To create or edit an instance of this class, use Features::SheetMetal::FlatSolidBuilder Created in NX5.0.0
ObjectDataCsys	Structure used to return the objects of a flat solid
FlexibleCable	Represents a flexible cable To create or edit an instance of this class, use Features::SheetMetal::FlexibleCableBuilder Created in NX7.5.0
FreeformCurveCollection	Collection of freeform curve based features
FreeformSurfaceCollection	Collection of freeform surface based features
GeneralConic	Represents a general conic feature To create or edit an instance of this class, use Features::GeneralConicBuilder Created in NX8.5.0
GeneralConicBuilder	Represents a @link Features::GeneralConic Features::GeneralConic@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateGeneralConicBuilder Features::FeatureCollection::CreateGeneralConicBuilder @endlink <br> Default values
Geomcopy	Represents a geomcopy feature To create or edit an instance of this class, use Features::GeomcopyBuilder Created in NX5.0.0
GeomcopyBuilder	Represents a @link Features::Geomcopy Features::Geomcopy@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateGeomcopyBuilder Features::FeatureCollection::CreateGeomcopyBuilder @endlink <br> Default values
GeometricConstraintData	Represents Geometric Constraint Data class
GeometricConstraintDataManager	Represents Geometric Constraint Data Manager class
GeometricConstraintDataSetManager	Represents Geometric Constraint Data Set Manager class
GlobalShaping	Represents a global shaping feature To create or edit an instance of this class, use Features::GlobalShapingBuilder Created in NX5.0.0
GlobalShapingBuilder	Represents a @link Features::GlobalShaping Features::GlobalShaping@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateGlobalShapingBuilder Features::FeatureCollection::CreateGlobalShapingBuilder @endlink <br> Default values
GlobalShapingCurveOffsetBuilder	The class used to define the curves and offset laws needed for the target curve list
GlobalShapingCurveOffsetBuilderList	Represents a list of objects
GlobalShapingPointOffsetBuilder	The class used to define the points and offsets needed for the target point list
GlobalShapingPointOffsetBuilderList	Represents a list of objects
GroupFace	Represents a group face feature To create or edit an instance of this class, use Features::GroupFaceBuilder Created in NX6.0.0
GroupFaceBuilder	Represents a builder for a group face feature
Gusset	Represents a gusset feature To create or edit an instance of this class, use Features::SheetMetal::GussetBuilder Created in NX7.5.0
Helix	Represents a helix feature To create or edit an instance of this class, use Features::HelixBuilder Created in NX8.5.0
HelixBuilder	Represents a @link Features::Helix Features::Helix@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateHelixBuilder Features::FeatureCollection::CreateHelixBuilder @endlink <br> Default values
HemFlange	Represents a hem flange feature To create or edit an instance of this class, use Features::SheetMetal::HemFlangeBuilder Created in NX5.0.0
Hole	Represents a Hole feature To create or edit an instance of this class, use Features::HoleFeatureBuilder Created in NX3.0.0
HoleFeatureBuilder	Represents a Hole feature builder
HolePackage	Represents a hole package and hole series feature To create or edit an instance of this class, use Features::HolePackageBuilder Created in NX5.0.2
HolePackageBuilder	Represents a @link Features::HolePackage Features::HolePackage@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateHolePackageBuilder Features::FeatureCollection::CreateHolePackageBuilder @endlink <br> Default values
Human	Represents a human feature
HumanBuilder	Represents a human feature
IBoolean	Base class for Unite, Intersect and Subtract features
IContainerFeature	Represents a container feature on a part
IForm	Represents a IForm feature To create or edit an instance of this class, use Features::IFormBuilder Created in NX7.5.0
IFormBuilder	Represents a Features::IForm builder
IIsolateToolBodyOperation	Represents a combine body feature
InstanceFeature	Represents a instance feature To create or edit an instance of this class, use Features::InstanceFeatureBuilder Created in NX8.0.0
InstanceFeatureBuilder	instance feature builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateInstanceFeatureBuilder Features::FeatureCollection::CreateInstanceFeatureBuilder @endlink <br> Default values
Intersect	Represents a Intersect feature Note that this class is now deprecated
IntersectionCurve	Represents a Features::IntersectionCurve To create or edit an instance of this class, use Features::IntersectionCurveBuilder Created in NX5.0.0
IntersectionCurveBuilder	Represents a @link Features::IntersectionCurveBuilder Features::IntersectionCurveBuilder@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateIntersectionCurveBuilder Features::FeatureCollection::CreateIntersectionCurveBuilder @endlink <br> Default values
IsolateFeature	Represents a Isolate Object of feature To create or edit an instance of this class, use Features::IsolateFeatureBuilder Created in NX8.5.0
IsolateFeatureBuilder	Represents a Features::IsolateFeature builder To create a new instance of this class, use Features::FeatureCollection::CreateIsolateFeatureBuilder Created in NX8.5.0
IsoparametricCurves	Represents a isoparametric curves feature To create or edit an instance of this class, use Features::IsoparametricCurvesBuilder Created in NX8.0.0
IsoparametricCurvesBuilder	Represents a @link Features::IsoparametricCurves Features::IsoparametricCurves@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateIsoparametricCurvesBuilder Features::FeatureCollection::CreateIsoparametricCurvesBuilder @endlink <br> Default values
Jog	Represents a Jog feature To create or edit an instance of this class, use Features::SheetMetal::JogBuilder Created in NX5.0.0
JoinCurves	Represents a join curve feature To create or edit an instance of this class, use Features::JoinCurvesBuilder Created in NX5.0.0
JoinCurvesBuilder	Represents a Features::JoinCurves builder
LabelChamfer	Represents a label chamfer feature To create or edit an instance of this class, use Features::LabelChamferBuilder Created in NX7.0.0
LabelChamferBuilder	Represents a Features::LabelChamfer builder To create a new instance of this class, use Features::FeatureCollection::CreateLabelChamferBuilder Created in NX7.0.0
LabelNotchBlend	Represents a label notch blend feature To create or edit an instance of this class, use Features::LabelNotchBlendBuilder Created in NX8.0.0
LabelNotchBlendBuilder	Represents a Features::LabelNotchBlend builder To create a new instance of this class, use Features::FeatureCollection::CreateLabelNotchBlendBuilder Created in NX8.0.0
LawCurve	Represents a law curve feature To create or edit an instance of this class, use Features::LawCurveBuilder Created in NX7.5.1
LawCurveBuilder	Represents a @link Features::LawCurve Features::LawCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateLawCurveBuilder Features::FeatureCollection::CreateLawCurveBuilder @endlink <br> Default values
LawExtension	Represents a law extension feature To create or edit an instance of this class, use Features::LawExtensionBuilder Created in NX6.0.0
LawExtensionBuilder	Represents a @link Features::LawExtension Features::LawExtension@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateLawExtensionBuilder Features::FeatureCollection::CreateLawExtensionBuilder @endlink <br> Default values
LawExtensionBuilderEx	Represents a @link Features::LawExtensionEx Features::LawExtensionEx@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateLawExtensionBuilderEx Features::FeatureCollection::CreateLawExtensionBuilderEx @endlink <br> Default values
LawExtensionEx	Represents a law extension feature To create or edit an instance of this class, use Features::LawExtensionBuilderEx Created in NX8.5.0
LinearDimension	Represents a linear dimension feature To create or edit an instance of this class, use Features::LinearDimensionBuilder Created in NX6.0.0
LinearDimensionBuilder	Represents a @link Features::LinearDimension Features::LinearDimension@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateLinearDimensionBuilder Features::FeatureCollection::CreateLinearDimensionBuilder @endlink <br> Default values
LinkedFacet	Represents a linked facet feature To create or edit an instance of this class, use Features::LinkedFacetBuilder Created in NX6.0.0
LinkedFacetBuilder	Represents a Features::LinkedFacet builder To create a new instance of this class, use Features::FeatureCollection::CreateLinkedFacetBuilder Created in NX6.0.0
LoftedFlange	Represents a Lofted Flange feature To create or edit an instance of this class, use Features::SheetMetal::LoftedFlangeBuilder Created in NX5.0.0
Louver	Represents a Louver feature To create or edit an instance of this class, use Features::SheetMetal::LouverBuilder Created in NX5.0.0
MakeOffset	Represents a make offset feature To create or edit an instance of this class, use Features::MakeOffsetBuilder Created in NX7.5.0
MakeOffsetBuilder	Represents a @link Features::MakeOffset Features::MakeOffset@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMakeOffsetBuilder Features::FeatureCollection::CreateMakeOffsetBuilder @endlink <br> Default values
Maple	Represents a maple feature To create or edit an instance of this class, use Features::MapleBuilder Created in NX7.5.0
MapleBuilder	Represents a @link Features::Maple Features::Maple@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMapleBuilder Features::FeatureCollection::CreateMapleBuilder @endlink <br> Default values
MasterCut	Represents a section view feature To create or edit an instance of this class, use Features::MasterCutBuilder Created in NX5.0.0
MasterCutBuilder	Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View
MatchEdge	Represents a match edge feature To create or edit an instance of this class, use Features::MatchEdgeBuilder Created in NX6.0.0
MatchEdgeBuilder	Represents a @link Features::MatchEdge Features::MatchEdge@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMatchEdgeBuilder Features::FeatureCollection::CreateMatchEdgeBuilder @endlink <br> Default values
MatchedReferenceBuilder	Represents a Features::MatchedReferenceBuilder
MeshSurface	Represents a mesh surface feature
MeshSurfaceBuilder	Mesh Surface Builder class
Metaform	Represents a metaform feature To create or edit an instance of this class, use Features::SheetMetal::MetaformBuilder Created in NX7.5.0
MidSurfaceByFacePairs	Represents a mid surface by face pairs feature To create or edit an instance of this class, use Features::MidSurfaceByFacePairsBuilder Created in NX7.5.0
MidSurfaceByFacePairsBuilder	Represents a @link Features::MidSurfaceByFacePairs Features::MidSurfaceByFacePairs@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMidSurfaceByFacePairsBuilder Features::FeatureCollection::CreateMidSurfaceByFacePairsBuilder @endlink <br> Default values
MidSurfaceFacePair	Represents a mid surface by face pairs feature This is an abstract class Created in NX8.0.1
MidSurfaceUserDefined	Represents a midsurface user defined feature To create or edit an instance of this class, use Features::MidSurfaceUserDefinedBuilder Created in NX7.5.0
MidSurfaceUserDefinedBuilder	Represents a @link Features::MidSurfaceUserDefined Features::MidSurfaceUserDefined@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMidSurfaceUserDefinedBuilder Features::FeatureCollection::CreateMidSurfaceUserDefinedBuilder @endlink <br> Default values
Mirror	Represents a mirror feature To create or edit an instance of this class, use Features::MirrorBuilder Created in NX8.0.1
MirrorBody	Represents a mirror body feature To create or edit an instance of this class, use Features::MirrorBodyBuilder Created in NX5.0.0
MirrorBodyBuilder	Represents a @link Features::MirrorBody Features::MirrorBody@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMirrorBodyBuilder Features::FeatureCollection::CreateMirrorBodyBuilder @endlink <br> Default values
MirrorBuilder	Represents a @link Features::Mirror Features::Mirror@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMirrorBuilder Features::FeatureCollection::CreateMirrorBuilder @endlink <br> Default values
MirrorCurve	Represents a mirror curve feature To create or edit an instance of this class, use Features::MirrorCurveBuilder Created in NX6.0.0
MirrorCurveBuilder	Represents a @link Features::MirrorCurve Features::MirrorCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMirrorCurveBuilder Features::FeatureCollection::CreateMirrorCurveBuilder @endlink <br> Default values
MirrorFace	Represents a Mirror Face feature To create or edit an instance of this class, use Features::MirrorFaceBuilder Created in NX6.0.0
MirrorFaceBuilder	Represents a @link Features::MirrorFace Features::MirrorFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateMirrorFaceBuilder Features::FeatureCollection::CreateMirrorFaceBuilder @endlink <br> Default values
MirrorFeature	Represents a mirror feature feature To create or edit an instance of this class, use Features::MirrorFeatureBuilder Created in NX5.0.0
MirrorFeatureBuilder	Represents a Features::MirrorFeature builder To create a new instance of this class, use Features::FeatureCollection::CreateMirrorFeatureBuilder Created in NX5.0.0
MoveCurve	Represents a move curve feature To create or edit an instance of this class, use Features::MoveCurveBuilder Created in NX9.0.0
MoveCurveBuilder	Represents a @link Features::MoveCurve Features::MoveCurve@endlink builder <br> To create a new instance of this class, use @link Features::SynchronousCurveCollection::CreateMoveCurveBuilder Features::SynchronousCurveCollection::CreateMoveCurveBuilder @endlink <br> Default values
MoveEdge	Represents a move edge feature To create or edit an instance of this class, use Features::MoveEdgeBuilder Created in NX9.0.0
MoveEdgeBuilder	Represents a @link Features::MoveEdge Features::MoveEdge@endlink builder <br> To create a new instance of this class, use @link Features::SynchronousEdgeCollection::CreateMoveEdgeBuilder Features::SynchronousEdgeCollection::CreateMoveEdgeBuilder @endlink <br> Default values
MoveFace	Represents a move face feature , don't use it until nx502 To create or edit an instance of this class, use Features::MoveFaceBuilder Created in NX5.0.2
MoveFaceBuilder	Represents a builder for a move face feature, don't use it until nx502
MoveObject	Represents a Move-Object feature To create or edit an instance of this class, use Features::MoveObjectBuilder Created in NX6.0.0
MoveObjectBuilder	Represents a @link MoveObjectBuilder MoveObjectBuilder@endlink <br> To create a new instance of this class, use @link Features::BaseFeatureCollection::CreateMoveObjectBuilder Features::BaseFeatureCollection::CreateMoveObjectBuilder @endlink <br> Default values
NormalCutout	Represents a Normal Cutout feature To create or edit an instance of this class, use Features::SheetMetal::NormalCutoutBuilder Created in NX5.0.0
NSidedSurface	Represents a nsided surface feature To create or edit an instance of this class, use Features::NSidedSurfaceBuilder Created in NX6.0.0
NSidedSurfaceBuilder	Represents a @link Features::NSidedSurface Features::NSidedSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateNSidedSurfaceBuilder Features::FeatureCollection::CreateNSidedSurfaceBuilder @endlink <br> Default values
OffsetCurve	Represents a offset curve feature To create or edit an instance of this class, use Features::OffsetCurveBuilder Created in NX5.0.0
OffsetCurveBuilder	Represents a @link Features::OffsetCurve Features::OffsetCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateOffsetCurveBuilder Features::FeatureCollection::CreateOffsetCurveBuilder @endlink <br> Default values
OffsetEdge	Represents a offset edge feature To create or edit an instance of this class, use Features::OffsetEdgeBuilder Created in NX9.0.0
OffsetEdgeBuilder	Represents a Features::OffsetEdge builder To create a new instance of this class, use Features::SynchronousEdgeCollection::CreateOffsetEdgeBuilder Created in NX9.0.0
OffsetEmboss	Represents an offset emboss feature To create or edit an instance of this class, use Features::OffsetEmbossBuilder Created in NX5.0.0
OffsetEmbossBuilder	Represents a builder for an offset emboss feature
OffsetFace	Represents a offset face feature To create or edit an instance of this class, use Features::OffsetFaceBuilder Created in NX5.0.0
OffsetFaceBuilder	Represents a @link Features::OffsetFace Features::OffsetFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateOffsetFaceBuilder Features::FeatureCollection::CreateOffsetFaceBuilder @endlink <br> Default values
OffsetMoveCurve	Represents a offset move curve feature To create or edit an instance of this class, use Features::OffsetMoveCurveBuilder Created in NX9.0.0
OffsetMoveCurveBuilder	Represents a @link Features::OffsetMoveCurve Features::OffsetMoveCurve@endlink builder <br> To create a new instance of this class, use @link Features::SynchronousCurveCollection::CreateOffsetMoveCurveBuilder Features::SynchronousCurveCollection::CreateOffsetMoveCurveBuilder @endlink <br> Default values
OffsetRegion	Represents an offset region feature , don't use it until nx502 To create or edit an instance of this class, use Features::OffsetRegionBuilder Created in NX5.0.2
OffsetRegionBuilder	Represents a builder for an offset region feature, don't use it until nx502
OffsetSurface	Represents a offset surface feature
OffsetSurfaceBuilder	This class represents a offset surface builder, used for creating or editing an offset surface feature
OptimizeFace	Represents a optimize face feature To create or edit an instance of this class, use Features::OptimizeFaceBuilder Created in NX7.0.0
OptimizeFaceBuilder	Represents a builder of optimize face <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateOptimizeFaceBuilder Features::FeatureCollection::CreateOptimizeFaceBuilder @endlink <br> Default values
OvercrownBuilder	Represents a Overcrown Builder To create an instance of this this class use Features::FeatureCollection::CreateOvercrownFeatureBuilder Created in NX4.0.0
PaintParametersBuilder	Represents a paint feature parameters builder
Parallel	Represents a parallel feature To create or edit an instance of this class, use Features::ParallelBuilder Created in NX6.0.0
ParallelBuilder	Represents a Features::Parallel builder
PartGeometryCopyBuilder	Represents a Features::PartGeometryCopyBuilder builder Created in NX9.0.0
PartGeometryCopySelectBuilder	Represents a Features::PartGeometryCopySelectBuilder builder Created in NX9.0.0
PartGeometryCopySelectBuilderList	Represents a list of objects
PartModule	Represents a part module To create or edit an instance of this class, use Features::PartModuleBuilder Created in NX8.0.0
PartModuleBuilder	Represents a Features::PartModule builder To create a new instance of this class, use Features::FeatureCollection::CreatePartModuleBuilder Created in NX8.0.0
PasteFace	Represents a paste face feature To create or edit an instance of this class, use Features::PasteFaceBuilder Created in NX6.0.0
PasteFaceBuilder	Represents a builder for a paste face feature
Patch	Represents a Patch feature To create or edit an instance of this class, use Features::PatchBuilder Created in NX6.0.1
PatchBuilder	Represents a Features::PatchBuilder Lets you use a sheet body to replace some of the faces of a solid body
PatchOpenings	Represents a Patch Openings feature To create or edit an instance of this class, use Features::PatchOpeningsBuilder Created in NX5.0.0
PatchOpeningsBuilder	Represents a builder for a Patch Openings feature
PatternFace	Represents a pattern face feature , don't use it until nx502 To create or edit an instance of this class, use Features::PatternFaceBuilder Created in NX5.0.2
PatternFaceBuilder	Represents a builder for a pattern face feature, don't use it until nx502
PatternFaceFeature	Represents a pattern face feature To create or edit an instance of this class, use Features::PatternFaceFeatureBuilder Created in NX9.0.0
PatternFaceFeatureBuilder	Represents a builder for a pattern face feature, post NX9
PatternFeature	Represents a pattern feature To create or edit an instance of this class, use Features::PatternFeatureBuilder Created in NX7.0.0
PatternFeatureBuilder	Represents a @link Features::PatternFeature Features::PatternFeature@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePatternFeatureBuilder Features::FeatureCollection::CreatePatternFeatureBuilder @endlink <br> Default values
PatternGeometry	Represents a pattern geometry feature To create or edit an instance of this class, use Features::PatternGeometryBuilder Created in NX9.0.0
PatternGeometryBuilder	This class represents the builder to be used to create Pattern Geometry features <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePatternGeometryBuilder Features::FeatureCollection::CreatePatternGeometryBuilder @endlink <br> Default values
Perpendicular	Represents a perpendicular feature To create or edit an instance of this class, use Features::PerpendicularBuilder Created in NX6.0.0
PerpendicularBuilder	Represents a @link Features::Perpendicular Features::Perpendicular@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePerpendicularBuilder Features::FeatureCollection::CreatePerpendicularBuilder @endlink <br> Default values
PierceTask	Represents a Pierce Task feature To create or edit an instance of this class, use Die::PierceTaskBuilder Created in NX5.0.0
PointFeature	Represents a point feature To create or edit an instance of this class, use Features::PointFeatureBuilder Created in NX5.0.0
PointFeatureBuilder	Represents a Features::PointFeatureBuilder builder To create a new instance of this class, use Features::BaseFeatureCollection::CreatePointFeatureBuilder Created in NX5.0.0
PointSet	Represents a point set feature To create or edit an instance of this class, use Features::PointSetBuilder Created in NX6.0.0
PointSetBuilder	Represents a Features::PointSetBuilder
PointSetFacePercentageBuilder	Represents a Features::PointSetFacePercentageBuilder
PointSetFacePercentageBuilderList	Represents a list of objects
PoleSmoothing	Represents a pole smoothing feature To create or edit an instance of this class, use Features::PoleSmoothingBuilder Created in NX6.0.0
PoleSmoothingBuilder	Represents a @link Features::PoleSmoothing Features::PoleSmoothing@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePoleSmoothingBuilder Features::FeatureCollection::CreatePoleSmoothingBuilder @endlink <br> Default values
ProjectCurve	Represents a project curve feature To create or edit an instance of this class, use Features::ProjectCurveBuilder Created in NX5.0.0
ProjectCurveBuilder	Represents a @link Features::ProjectCurve Features::ProjectCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateProjectCurveBuilder Features::FeatureCollection::CreateProjectCurveBuilder @endlink <br> Default values
Promotion	Represents a promotion feature To create or edit an instance of this class, use Features::PromotionBuilder Created in NX6.0.0
PromotionBuilder	Represents a @link Features::Promotion Features::Promotion@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePromotionBuilder Features::FeatureCollection::CreatePromotionBuilder @endlink <br> Default values
PullFace	Represents a pull face feature To create or edit an instance of this class, use Features::PullFaceBuilder Created in NX6.0.0
PullFaceBuilder	Represents a @link Features::PullFace Features::PullFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePullFaceBuilder Features::FeatureCollection::CreatePullFaceBuilder @endlink <br> Default values
QuickBinder	Represents a quick binder feature To create or edit an instance of this class, use Die::QuickBinderBuilder Created in NX7.5.0
RadialDimension	Represents a radial dimension feature To create or edit an instance of this class, use Features::RadialDimensionBuilder Created in NX6.0.0
RadialDimensionBuilder	Represents a Features::RadialDimension builder To create a new instance of this class, use Features::FeatureCollection::CreateRadialDimensionBuilder Created in NX6.0.0
RapidSurface	Represents a Rapid Surfacing feature To create or edit an instance of this class, use Features::RapidSurfaceBuilder Created in NX5.0.0
RapidSurfaceBuilder	Represents a @link Features::RapidSurface Features::RapidSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateRapidSurfaceBuilder Features::FeatureCollection::CreateRapidSurfaceBuilder @endlink <br> Default values
RasterImage	Represents a Raster Image feature Not supported by KF at this time Created in NX4.0.0
Rebend	Represents a Rebend feature To create or edit an instance of this class, use Features::SheetMetal::RebendBuilder Created in NX5.0.0
ReferenceMapperBuilder	Represents a Features::ReferenceMapperBuilder It is used in the context of Boolean Target/Tool Mapping
RefitFace	Represents a refit face feature To create or edit an instance of this class, use Features::RefitFaceBuilder Created in NX6.0.0
RefitFaceBuilder	Represents a @link Features::RefitFace Features::RefitFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateRefitFaceBuilder Features::FeatureCollection::CreateRefitFaceBuilder @endlink <br> Default values
RemoveParametersBuilder	Represents a Features::RemoveParametersBuilder
ReorderBlends	Represents a reorder blends feature To create or edit an instance of this class, use Features::ReorderBlendsBuilder Created in NX7.5.1
ReorderBlendsBuilder	Represents a Features::ReorderBlends builder To create a new instance of this class, use Features::FeatureCollection::CreateReorderBlendsBuilder Created in NX7.5.1
ReplaceBlend	Represents a replace blend feature To create or edit an instance of this class, use Features::ReplaceBlendBuilder Created in NX7.0.0
ReplaceBlendBuilder	Represents a builder for a Replace Blend feature
ReplaceFace	Represents a replace face feature , don't use it until nx502 To create or edit an instance of this class, use Features::ReplaceFaceBuilder Created in NX5.0.2
ReplaceFaceBuilder	Represents a builder for a replace face feature, don't use it until nx502
ReplaceFeatureBuilder	Represents a replace feature builder
ResizeBendAngle	Represents a resize bend angle feature To create or edit an instance of this class, use Features::SheetMetal::ResizeBendAngleBuilder Created in NX5.0.0
ResizeBendRadius	Represents a resize bend radius feature To create or edit an instance of this class, use Features::SheetMetal::ResizeBendRadiusBuilder Created in NX5.0.0
ResizeBlend	Represents a resize blend feature , don't use it until nx502 To create or edit an instance of this class, use Features::ResizeBlendBuilder Created in NX5.0.2
ResizeBlendBuilder	Represents a builder for a resize blend feature, don't use it until nx502
ResizeChamfer	Represents a resize chamfer feature To create or edit an instance of this class, use Features::ResizeChamferBuilder Created in NX7.0.0
ResizeChamferBuilder	Represents a @link Features::ResizeChamfer Features::ResizeChamfer@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateResizeChamferBuilder Features::FeatureCollection::CreateResizeChamferBuilder @endlink <br> Default values
ResizeCurve	Represents a resize curve feature To create or edit an instance of this class, use Features::ResizeCurveBuilder Created in NX9.0.0
ResizeCurveBuilder	Represents a @link Features::ResizeCurve Features::ResizeCurve@endlink builder <br> To create a new instance of this class, use @link Features::SynchronousCurveCollection::CreateResizeCurveBuilder Features::SynchronousCurveCollection::CreateResizeCurveBuilder @endlink <br> Default values
ResizeFace	Represents a resize blend feature , don't use it until nx502 To create or edit an instance of this class, use Features::ResizeFaceBuilder Created in NX5.0.2
ResizeFaceBuilder	Represents a builder for a resize face feature, don't use it until nx502
ResizeNeutralFactor	Represents a resize neutral factor feature To create or edit an instance of this class, use Features::SheetMetal::ResizeNeutralFactorBuilder Created in NX5.0.0
ResizePlane	Represents a Resize Datum Plane feature To create or edit an instance of this class, use Features::ResizePlaneBuilder Created in NX6.0.3
ResizePlaneBuilder	Represents a Features::ResizePlane builder To create a new instance of this class, use Features::FeatureCollection::CreateResizePlaneBuilder Created in NX6.0.3
Revolve	Represents a revolve feature
RevolveBuilder	Represents a revolve builder
Rib	Represents a rib feature To create or edit an instance of this class, use Features::RibBuilder Created in NX9.0.0
Ribbon	Represents a ribbon feature To create or edit an instance of this class, use Features::RibbonBuilder Created in NX6.0.0
RibbonBuilder	Represents a @link Features::Ribbon Features::Ribbon@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateRibbonBuilder Features::FeatureCollection::CreateRibbonBuilder @endlink <br> Default values
RibBuilder	Represents a @link Features::Rib Features::Rib@endlink builder <br> To create a new instance of this class, use @link Features::DesignFeatureCollection::CreateRibBuilder Features::DesignFeatureCollection::CreateRibBuilder @endlink <br> Default values
Rotor	Represents a Die CAM Rotor feature
RPO	Represents an RPO dimension This is an abstract class, and cannot be instantiated Created in NX4.0.0
RPOBuilder	Represents a RPO builder
RPODimension	Represents a RPO Dimension
Ruled	Represents a ruled feature
RuledBuilder	Represents a @link Features::Ruled Features::Ruled@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateRuledBuilder Features::FeatureCollection::CreateRuledBuilder @endlink <br> Default values
Scale	Represents a scale feature To create or edit an instance of this class, use Features::ScaleBuilder Created in NX5.0.0
ScaleBuilder	Represents a @link Features::Scale Features::Scale@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateScaleBuilder Features::FeatureCollection::CreateScaleBuilder @endlink <br> Default values
SectionCurve	Represents a section curves feature To create or edit an instance of this class, use Features::SectionCurveBuilder Created in NX5.0.0
SectionCurveBuilder	Represents a @link Features::SectionCurve Features::SectionCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSectionCurveBuilder Features::FeatureCollection::CreateSectionCurveBuilder @endlink <br> Default values
SectionEdit	Represents a section edit feature To create or edit an instance of this class, use Features::SectionEditBuilder Created in NX6.0.0
SectionEditBuilder	Represents a Features::SectionEdit builder To create a new instance of this class, use Features::FeatureCollection::CreateSectionEditBuilder Created in NX6.0.0
SectionInertiaAnalysis	Represents a section inertia analysis feature To create or edit an instance of this class, use Features::SectionInertiaAnalysisBuilder Created in NX5.0.0
SectionInertiaAnalysisBuilder	Represents a @link Features::SectionInertiaAnalysis Features::SectionInertiaAnalysis@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSectionInertiaAnalysisBuilder Features::FeatureCollection::CreateSectionInertiaAnalysisBuilder @endlink <br> Default values
SectionSurface	Represents a section surface feature To create or edit an instance of this class, use Features::SectionSurfaceBuilder Created in NX6.0.0
SectionSurfaceBuilder	Represents a @link Features::SectionSurface Features::SectionSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSectionSurfaceBuilder Features::FeatureCollection::CreateSectionSurfaceBuilder @endlink <br> Default values
SectionSurfaceBuilderEx	Represents a Features::SectionSurface builder
SelectDatumCsysList	Represents a list of objects on a selection list
SelectFeature	Represents a single object selection
SelectFeatureList	Represents a list of objects on a selection list
SelectFlatPattern	Represents a single object selection
SelectPartModule	Represents a single object selection
Sew	Represents a sew feature To create or edit an instance of this class, use Features::SewBuilder Created in NX5.0.0
SewBuilder	Represents a Features::Sew builder To create a new instance of this class, use Features::FeatureCollection::CreateSewBuilder Created in NX5.0.0
SheetMetalFromSolid	Represents a Sheet Metal from Solid feature To create or edit an instance of this class, use Features::SheetMetal::SheetMetalFromSolidBuilder Created in NX6.0.0
Shell	Represents a Shell feature To create or edit an instance of this class, use Features::ShellBuilder Created in NX4.0.0
ShellBuilder	Represents the Shell feature builder To create a new instance of this class, use Features::FeatureCollection::CreateShellBuilder Created in NX4.0.0
ShellFace	Represents a shell face feature To create or edit an instance of this class, use Features::ShellFaceBuilder Created in NX6.0.0
ShellFaceBuilder	Represents a @link Features::ShellFace Features::ShellFace@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateShellFaceBuilder Features::FeatureCollection::CreateShellFaceBuilder @endlink <br> Default values
ShipCollection	This class contains the factory method for creating ship feature builder
iterator	Iterator for accessing the contents of the collection
ShowRelatedFacesBuilder	Represents a builder for a Show Related Faces
SilhouetteFlange	Represents a silhouette flange feature To create or edit an instance of this class, use Features::SilhouetteFlangeBuilder Created in NX6.0.0
SilhouetteFlangeBuilder	Represents a @link Features::SilhouetteFlange Features::SilhouetteFlange@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSilhouetteFlangeBuilder Features::FeatureCollection::CreateSilhouetteFlangeBuilder @endlink <br> Default values
SketchConversionReport	Represents a collection of status of conversion of features to independent sketch
SketchConversionStatus	Represents the status of conversion of features to independent sketch
SketchFeature	Represents a sketch feature This is an abstract class, and cannot be instantiated Created in NX3.0.0
SketchFitCurveBuilder	Sketch Fit Curve builder class
SketchSplineBuilder	Sketch Spline builder class
SmoothCurveString	Represents a smooth section feature To create or edit an instance of this class, use Features::SmoothCurveStringBuilder Created in NX9.0.0
SmoothCurveStringBuilder	Represents a @link Features::SmoothCurveString Features::SmoothCurveString@endlink builder <br> To create a new instance of this class, use @link Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder @endlink <br> Default values
SmoothSpline	Represents a smooth spline feature To create or edit an instance of this class, use Features::SmoothSplineBuilder Created in NX6.0.0
SmoothSplineBuilder	Represents a @link Features::SmoothSpline Features::SmoothSpline@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSmoothSplineBuilder Features::FeatureCollection::CreateSmoothSplineBuilder @endlink <br> Default values
SnipSurface	Represents a snip surface feature To create or edit an instance of this class, use Features::SnipSurfaceBuilder Created in NX6.0.0
SnipSurfaceBuilder	Represents a @link Features::SnipSurface Features::SnipSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSnipSurfaceBuilder Features::FeatureCollection::CreateSnipSurfaceBuilder @endlink <br> Default values
SolidPunch	Represents a Solid Punch feature To create or edit an instance of this class, use Features::SheetMetal::SolidPunchBuilder Created in NX6.0.2
Sphere	Represents a sphere feature To create or edit an instance of this class, use Features::SphereBuilder Created in NX6.0.0
SphereBuilder	Represents a Features::Sphere builder
SphericalCorner	Represents a spherical corner feature To create or edit an instance of this class, use Features::SphericalCornerBuilder Created in NX8.5.0
SphericalCornerBuilder	Represents a @link Features::SphericalCorner Features::SphericalCorner@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSphericalCornerBuilder Features::FeatureCollection::CreateSphericalCornerBuilder @endlink <br> Default values
SplitBody	Represents a split body feature To create or edit an instance of this class, use Features::SplitBodyBuilder Created in NX6.0.0
SplitBodyBuilder	Represents a @link Features::SplitBody Features::SplitBody@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSplitBodyBuilderUsingCollector Features::FeatureCollection::CreateSplitBodyBuilderUsingCollector @endlink <br> Default values
StudioSpline	Represents a studio spline feature To create or edit an instance of this class, use Features::StudioSplineBuilderEx Created in NX5.0.0
StudioSplineBuilder	Studio Spline builder class
StudioSplineBuilderEx	Studio Spline builder class
StudioSurface	Represents a studio surface feature To create or edit an instance of this class, use Features::StudioSurfaceBuilder Created in NX5.0.0
StudioSurfaceBuilder	Represents a @link Features::StudioSurface Features::StudioSurface@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStudioSurfaceBuilder Features::FeatureCollection::CreateStudioSurfaceBuilder @endlink <br> Default values
StudioXform	Represents a studio xform feature To create or edit an instance of this class, use Features::StudioXformBuilderEx Created in NX6.0.0
StudioXformBuilder	Represents a @link Features::StudioXform Features::StudioXform@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStudioXformBuilder Features::FeatureCollection::CreateStudioXformBuilder @endlink <br> Default values
StudioXformBuilderEx	Represents a @link Features::StudioXform Features::StudioXform@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStudioXformBuilderEx Features::FeatureCollection::CreateStudioXformBuilderEx @endlink <br> Default values
StyledBlend	Represents a styled blend feature To create or edit an instance of this class, use Features::StyledBlendBuilder Created in NX6.0.0
StyledBlendBuilder	Represents a @link Features::StyledBlend Features::StyledBlend@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStyledBlendBuilder Features::FeatureCollection::CreateStyledBlendBuilder @endlink <br> Default values
StyledCorner	Represents a styled corner feature To create or edit an instance of this class, use Features::StyledCornerBuilder Created in NX6.0.0
StyledCornerBuilder	Represents a @link Features::StyledCorner Features::StyledCorner@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStyledCornerBuilder Features::FeatureCollection::CreateStyledCornerBuilder @endlink <br> Default values
StyledSweep	Represents a styled sweep feature To create or edit an instance of this class, use Features::StyledSweepBuilder Created in NX6.0.0
StyledSweepBuilder	Represents a @link Features::StyledSweep Features::StyledSweep@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateStyledSweepBuilder Features::FeatureCollection::CreateStyledSweepBuilder @endlink <br> Default values
Subtract	Represents a Subtract feature
SweepAlongGuide	Represents a sweep along guide feature To create or edit an instance of this class, use Features::SweepAlongGuideBuilder Created in NX6.0.0
SweepAlongGuideBuilder	Represents a @link Features::SweepAlongGuide Features::SweepAlongGuide@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSweepAlongGuideBuilder Features::FeatureCollection::CreateSweepAlongGuideBuilder @endlink <br> Default values
SweepFeatureCollection	Manages sweep-like features
Swept	Represents a swept feature To create or edit an instance of this class, use Features::SweptBuilder Created in NX5.0.0
SweptBuilder	Represents a @link Features::Swept Features::Swept@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSweptBuilder Features::FeatureCollection::CreateSweptBuilder @endlink <br> Default values
SweptVolume	Represents a swept volume feature To create or edit an instance of this class, use Features::SweptVolumeBuilder Created in NX9.0.0
SweptVolumeBuilder	Represents a @link Features::SweptVolume Features::SweptVolume@endlink builder <br> To create a new instance of this class, use @link Features::SweepFeatureCollection::CreateSweptVolumeBuilder Features::SweepFeatureCollection::CreateSweptVolumeBuilder @endlink <br> Default values
Symmetric	Represents a symmetric feature
SymmetricBuilder	Represents a @link Features::Symmetric Features::Symmetric@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateSymmetricBuilder Features::FeatureCollection::CreateSymmetricBuilder @endlink <br> Default values
SynchronousCurveCollection	This class contains the factory method for creating ST curve builder
iterator	Iterator for accessing the contents of the collection
SynchronousEdgeCollection	This class contains the factory method for creating ship feature builder
iterator	Iterator for accessing the contents of the collection
Tab	Represents a Tab feature To create or edit an instance of this class, use Features::SheetMetal::TabBuilder Created in NX5.0.0
TabNoteCfgBuilder	Represents a Features::TabNoteCfgBuilder
Tangent	Represents a tangent feature To create or edit an instance of this class, use Features::TangentBuilder Created in NX6.0.0
TangentBuilder	Represents a @link Features::Tangent Features::Tangent@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTangentBuilder Features::FeatureCollection::CreateTangentBuilder @endlink <br> Default values
TestFeature	Represents a test feature To create or edit an instance of this class, use Features::TestFeatureBuilder Created in NX9.0.0
TestFeatureBuilder	Represents a Features.Newapp.TestFeature builder
Text	Represents a text feature To create or edit an instance of this class, use Features::TextBuilder Created in NX7.5.1
TextBuilder	Represents a @link Features::Text Features::Text@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTextBuilder Features::FeatureCollection::CreateTextBuilder @endlink <br> Default values
Thicken	Represents a thicken feature To create or edit an instance of this class, use Features::ThickenBuilder Created in NX5.0.0
ThickenBuilder	Represents a builder for a Features::Thicken feature
ThreeBendCorner	Represents a ThreeBendCorner feature To create or edit an instance of this class, use Features::SheetMetal::ThreeBendCornerBuilder Created in NX5.0.0
ThroughCurveMesh	Represents a through curve mesh feature
ThroughCurveMeshBuilder	Represents a Features::ThroughCurveMesh builder
ThroughCurves	Represents a Through Curves feature
ThroughCurvesBuilder	Represents a Features::ThroughCurves builder
ToolingCollection	This class contains the factory method for creating tooling feature builder
iterator	Iterator for accessing the contents of the collection
TrimAndExtend	Represents a trim and extend feature To create or edit an instance of this class, use Features::TrimAndExtendBuilder Created in NX9.0.0
TrimAndExtendBuilder	Represents a @link Features::TrimAndExtend Features::TrimAndExtend@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimAndExtendBuilder Features::FeatureCollection::CreateTrimAndExtendBuilder @endlink <br> Default values
TrimBody	Represents a Trim Body feature
TrimBody2	Represents a trim body feature
TrimBody2Builder	Represents a Features::TrimBody2 builder for Trim Body feature
TrimBodyBuilder	Represents the trim body feature builder
TrimCornerBuilder	Represents a builder for non-associative trim corner operation
TrimCurve	Represents a trim curve feature To create or edit an instance of this class, use Features::TrimCurveBuilder Created in NX5.0.0
TrimCurveBuilder	Represents a @link Features::TrimCurve Features::TrimCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimCurveBuilder Features::FeatureCollection::CreateTrimCurveBuilder @endlink <br> Default values
TrimExtend	Represents a trim extend feature To create or edit an instance of this class, use Features::TrimExtendBuilder Created in NX5.0.0
TrimExtendBuilder	Represents a @link Features::TrimExtend Features::TrimExtend@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimExtendBuilder Features::FeatureCollection::CreateTrimExtendBuilder @endlink <br> Default values
TrimLineDevelopment	Represents a trim line development feature To create or edit an instance of this class, use Die::TrimLineDevelopmentBuilder Created in NX6.0.0
TrimSheet	Represents a trim sheet feature To create or edit an instance of this class, use Features::TrimSheetBuilder Created in NX5.0.0
TrimSheetBuilder	Represents a @link Features::TrimSheet Features::TrimSheet@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimsheetBuilder Features::FeatureCollection::CreateTrimsheetBuilder @endlink <br> Default values
Tube	Represents a tube feature To create or edit an instance of this class, use Features::TubeBuilder Created in NX5.0.0
TubeBuilder	Represents a @link Features::Tube Features::Tube@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTubeBuilder Features::FeatureCollection::CreateTubeBuilder @endlink <br> Default values
Unbend	Represents a Unbend feature To create or edit an instance of this class, use Features::SheetMetal::UnbendBuilder Created in NX5.0.0
Unite	Represents a Unite feature
UniversalUnform	Represents a UniversalUnform feature To create or edit an instance of this class, use Tooling::UniversalUnformBuilder Created in NX8.5.0
Unsew	Represents a Unsew feature To create or edit an instance of this class, use Features::UnsewBuilder Created in NX5.0.0
UnsewBuilder	Represents a @link Features::Unsew Features::Unsew@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateUnsewBuilder Features::FeatureCollection::CreateUnsewBuilder @endlink <br> Default values
Untrim	Represents a Untrim feature
UntrimBuilder	Represents a Features::Untrim builder To create a new instance of this class, use Features::FeatureCollection::CreateUntrimBuilder Created in NX5.0.0
UserDefinedFeatureApplicationData	JA interface for UserDefinedFeatureApplicationData object Created in NX8.0.0
UserDefinedFeatureApplicationField	JA interface for UserDefinedFeatureApplicationField object Created in NX8.0.0
UserDefinedFeatureClass	JA interface for UserDefinedFeatureClass An instance of this class can be obtained from Features::UserDefinedFeatureClassManager::CreateClass Created in NX8.0.0
UserDefinedFeatureClassManager	JA interface for the UserDefinedFeatureClassManager object To obtain an instance of this class, refer to Session Created in NX8.0.0
UserDefinedFeatureCopyEvent	JA interface for the UserDefinedFeatureCopyEvent object This calls cannot be created Created in NX8.0.0
UserDefinedFeatureCreateEvent	JA interface for the UserDefinedFeatureCreateEvent object This calls cannot be created Created in NX8.0.0
UserDefinedFeatureEditEvent	JA interface for the UserDefinedFeatureEditEvent object This calls cannot be created Created in NX8.0.0
UserDefinedFeatureExpressionData	JA interface for UserDefinedFeatureExpressionData object
UserDefinedFeatureIconEvent	JA interface for the UserDefinedFeatureIconEvent object This calls cannot be created Created in NX8.0.0
UserDefinedFeatureReferenceData	JA interface for UserDefinedFeatureReference object
UserDefinedFeatureUpdateEvent	JA interface for the UserDefinedFeatureUpdateEvent object This calls cannot be created Created in NX8.0.0
UserDefinedObjectFeature	Represents a User Defined Object feature
UserDefinedObjectFeatureBuilder	Represents a user defined object feature builder
VariableOffset	Represents a variable offset feature To create or edit an instance of this class, use Features::VariableOffsetBuilder Created in NX8.0.0
VariableOffsetBuilder	Represents a @link Features::VariableOffset Features::VariableOffset@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateVariableOffsetBuilder Features::FeatureCollection::CreateVariableOffsetBuilder @endlink <br> Default values
Varsweep	Represents a Varsweep feature
VarsweepBuilder	Represents a Variational Sweep feature builder
VehicleDesignCollection	This class contains the factory method for creating vehicle design feature builder
iterator	Iterator for accessing the contents of the collection
VirtualBlendEdgeBuilder	Represents a Features::VirtualBlendEdgeBuilder To create a new instance of this class, use Features::FeatureCollection::CreateVirtualBlendEdgeBuilder Created in NX7.0.1
VirtualCurve	Represents a virtual curve feature To create or edit an instance of this class, use Features::VirtualCurveBuilder Created in NX7.5.0
VirtualCurveBuilder	Represents a @link Features::VirtualCurve Features::VirtualCurve@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateVirtualCurveBuilder Features::FeatureCollection::CreateVirtualCurveBuilder @endlink <br> Default values
WaveDatum	Represents a WAVEDATUM feature To create or edit an instance of this class, use Features::WaveDatumBuilder Created in NX5.0.0
WaveDatumBuilder	Represents a Wave Datum builder
WaveInterfaceLinkerBuilder	Represents a WaveInterfacelinker Feature builder <br> To create a new instance of this class, use @link Features::BaseFeatureCollection::CreateWaveInterfaceLinkerBuilder Features::BaseFeatureCollection::CreateWaveInterfaceLinkerBuilder @endlink <br> Default values
WaveLink	Represents a wavelink feature To create or edit an instance of this class, use Features::WaveLinkBuilder Created in NX5.0.0
WaveLinkBuilder	Represents a Wavelink Feature builder <br> To create a new instance of this class, use @link Features::BaseFeatureCollection::CreateWaveLinkBuilder Features::BaseFeatureCollection::CreateWaveLinkBuilder @endlink <br> Default values
WavePoint	Represents a wavepoint feature To create or edit an instance of this class, use Features::WavePointBuilder Created in NX5.0.0
WavePointBuilder	Represents a @link Features::Feature Features::Feature@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateWavePointBuilder Features::FeatureCollection::CreateWavePointBuilder @endlink <br> Default values
WaveRouting	Represents a waverouting feature To create or edit an instance of this class, use Features::WaveRoutingBuilder Created in NX5.0.0
WaveRoutingBuilder	Represents a @link Features::WaveRoutingBuilder Features::WaveRoutingBuilder@endlink <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateWaveRoutingBuilder Features::FeatureCollection::CreateWaveRoutingBuilder @endlink <br> Default values
WaveSketch	Represents a WAVESKETCH feature To create or edit an instance of this class, use Features::WaveSketchBuilder Created in NX5.0.1
WaveSketchBuilder	Represents a WaveSketchBuilder
WrapBuilder	Represents a Features::WrapUnwrap builder
WrapGeometry	Represents a wrap geometry feature To create or edit an instance of this class, use Features::WrapGeometryBuilder Created in NX6.0.0
WrapGeometryBuilder	Represents a @link Features::WrapGeometry Features::WrapGeometry@endlink builder <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateWrapGeometryBuilder Features::FeatureCollection::CreateWrapGeometryBuilder @endlink <br> Default values
WrapUnwrap	Represents a wrap or unwrap curve feature To create or edit an instance of this class, use Features::WrapBuilder Created in NX6.0.0
Fields	Provides classes and interfaces for Fields
DisplayPropertiesBuilder	Represents a builder class for editing display properties of a Fields::Field
ExportData	Represents data for field export
Field	Represents an Field abstract class
FieldDomain	Represents the Field Domains
FieldDomainCollection	Provides methods for manipulating the field domains To obtain an instance of this class, refer to Fields::FieldManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
FieldEvaluator	Represents a Field Evaluator which can be used to evaluate a Fields::Field
FieldExpression	Represents the Field Expression class
FieldFormula	Represents the Field Formula class
FieldLink	Represents the Field Link class
FieldLinksTable	Represents the Field LinksTable class
FieldManager	Represents the manager class of the Fields
FieldReference	Represents an reference field
FieldTable	Represents the Field Table class
FieldVariable	Represents the Field Variables
Bounds	Variable Bounds structure
FieldWrapper	This class defines a value that is internally backed up by a field
ImportData	Represents data transfer objectst for field import
NameVariable	This class stores the common name and measure for field variables
PathObjects	Contains objects that define a lattice path
PathObjectsList	Represents a list of objects
ScalarFieldWrapper	This class defines a scalar value that is internally backed up by a (optionally scaled) field or an expression
SpatialMap	Represents the Field Domain Map
SpatialMapBuilder	Represents a Fields::SpatialMap builder
VectorFieldWrapper	This class defines a vector value that is internally backed up by a (optionally scaled) field or three expressions
Formboard	Provides interfaces and classes to the Routing Electrical Formboard functionality
FaceAnnotationBuilder	Builder for Face Annotation functionality used in formboard
FlipComponentBuilder	Builder for flip component operation used in formboard
FormboardLayoutBuilder	Class that performs the "layout" of Formboard geometry
FormboardManager	Contains information about flattened harness drawing and drafting data for harness manufacturing drawings (Formboard Drawings)
LayoutLengthOptions	Defines the various options for determining the rounded lengths of formboard geometry during the layout or update process
ObjectAttributeReferenceBuilder	Builder for "object attribute" used in formboard which enbles user to create annotation in drafting functionality
OrientBranchBuilder	Builder for "Orient Branch" operation used in formboard
PathLengthAnnotationBuilder	TODO Class documentation <br> To create a new instance of this class, use @link Formboard::FormboardManager::CreatePathLengthAnnotationBuilder Formboard::FormboardManager::CreatePathLengthAnnotationBuilder @endlink <br> Default values
ShapeSegmentBuilder	Builder for Face Annotation functionality used in formboard
UpdateDiscrepancy	Defines a discrepancy object which contains information about a specific difference between the formboard drawing and the 3D harness model
UpdateFormboardBuilder	Class that performs the "update" of Formboard geometry
Gateway	Provides classes and interfaces for Gateway
BaseExplicitOrderBuilder	This is the Gateway::BaseExplicitOrderBuilder for the explicit order This is an abstract class, and cannot be instantiated
CopyCutBuilder	Represents a Gateway::CopyCutBuilder To create a new instance of this class, use ClipboardOperationsManager::CreateCopyCutBuilder Created in NX7.5.0
ImageCaptureBuilder	Represents a @link Gateway::ImageCaptureBuilder Gateway::ImageCaptureBuilder@endlink builder <br> To create a new instance of this class, use @link Gateway::ImageCaptureManager::CreateImageCaptureBuilder Gateway::ImageCaptureManager::CreateImageCaptureBuilder @endlink <br> Default values
ImageCaptureManager	ImageCaptureManager class To obtain an instance of this class, refer to BasePart Created in NX7.5.0
PasteBuilder	Represents a Gateway::PasteBuilder To create a new instance of this class, use ClipboardOperationsManager::CreatePasteBuilder Created in NX7.5.0
GeometricAnalysis	Provides classes and interfaces for Geometric Analysis
SectionAnalysis	Provides classes and interfaces for Section Analysis
CircularGridBuilder	Represents the circular grid section specifications for a GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder
CurveAlignedBuilder	Represents the Curve Aligned specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
GridSpacingBuilder	Represents the grid spacing for certain types of section specifications for the GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder
InteractiveBuilder	Represents the Interactive specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
IsoparametricBuilder	Represents the Isoparametric specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
ParallelPlanesExBuilder	Represents the Parallel Plane specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
QuadrilateralGridBuilder	Represents the quadrilateral grid section specifications for a GeometricAnalysis::SectionAnalysis::SectionAnalysisBuilder
RadialBuilder	Represents the Radial specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
SectionAnalysisBuilder	Represents a GeometricAnalysis::SectionAnalysisObject builder
SectionAnalysisExBuilder	Represents a @link GeometricAnalysis::SectionAnalysis::SectionAnalysisExObject GeometricAnalysis::SectionAnalysis::SectionAnalysisExObject@endlink builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateSectionAnalysisExBuilder GeometricAnalysis::AnalysisObjectCollection::CreateSectionAnalysisExBuilder @endlink <br> Default values
SectionAnalysisExObject	Represents a Section Analysis Object of the new version
SectionPlaneBuilder	Represents a plane which is used to cut sections on faces or facet bodies Created in NX7.0.0
TriangularGridBuilder	Represents the triangular grid section specifications for a SectionAnalysisBuilder
XYZPlaneBuilder	Represents the XYZ Plane specification for a GeometricAnalysis::SectionAnalysis::SectionAnalysisExBuilder
AnalysisManager	Represents the collection of analysis commands To obtain an instance of this class, refer to BasePart Created in NX5.0.0
AnalysisObject	Represents an Analysis Object This is an abstract class, and cannot be instantiated Created in NX5.0.0
AnalysisObjectCollection	Create a AnalysisObjectCollection To obtain an instance of this class, refer to GeometricAnalysis::AnalysisManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
CurveAnalysisCombsBuilder	This class handles the options setting for the curve analysis information (Curvature Combs) display
CurveAnalysisDisplay	Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections To obtain an instance of this class, refer to GeometricAnalysis::AnalysisObjectCollection Created in NX6.0.0
CurveAnalysisInflectionsBuilder	This class handles the options setting for the curve analysis information (Inflections) display
CurveAnalysisPeaksBuilder	This class handles the options setting for the curve analysis information (Peaks) display
CurveAnalysisRecord	Represents the information regarding how to display a curve's poles, knots, combs, peaks and inflections
CurveContinuity	Represents a Curve Continuity Analysis builder To create or edit an instance of this class, use GeometricAnalysis::CurveContinuityBuilder Created in NX7.0.0
CurveContinuityBuilder	Represents a curve continuity builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateCurveContinuityBuilder GeometricAnalysis::AnalysisObjectCollection::CreateCurveContinuityBuilder @endlink <br> Default values
CurveCurvatureAnalysis	Represents a CurveCurvatureAnalysis builder To create or edit an instance of this class, use GeometricAnalysis::CurveCurvatureAnalysisBuilder Created in NX7.0.0
CurveCurvatureAnalysisBuilder	Represents a @link GeometricAnalysis::CurveCurvatureAnalysis GeometricAnalysis::CurveCurvatureAnalysis@endlink builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateCurveCurvatureAnalysisBuilder GeometricAnalysis::AnalysisObjectCollection::CreateCurveCurvatureAnalysisBuilder @endlink <br> Default values
DeviationChecking	Represents a GeometricAnalysis::DeviationChecking To create a new instance of this class, use GeometricAnalysis::AnalysisManager::CreateDeviationCheckingObject Created in NX6.0.0
DeviationGauge	Deviation Gauge analysis object class To create or edit an instance of this class, use GeometricAnalysis::DeviationGaugeBuilder Created in NX6.0.0
DeviationGaugeBuilder	DeviationGaugeBuilder class <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateDeviationGaugeBuilder GeometricAnalysis::AnalysisObjectCollection::CreateDeviationGaugeBuilder @endlink <br> Default values
DraftAnalysis	Represents a Draft Analysis builder To create or edit an instance of this class, use GeometricAnalysis::DraftAnalysisBuilder Created in NX8.0.0
DraftAnalysisBuilder	Represents a Draft Analysis builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateDraftAnalysisBuilder GeometricAnalysis::AnalysisObjectCollection::CreateDraftAnalysisBuilder @endlink <br> Default values
DupinBuilder	The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface
ExamineGeometry	Represents the Examine Geometry class To create a new instance of this class, use GeometricAnalysis::AnalysisManager::CreateExamineGeometryObject Created in NX5.0.0
FaceCurvatureAnalysis	Represents a Face Curvature Analysis builder To create or edit an instance of this class, use GeometricAnalysis::FaceCurvatureAnalysisBuilder Created in NX8.0.0
FaceCurvatureAnalysisBuilder	Represents a GeometricAnalysis::FaceCurvatureAnalysisBuilder builder
GapFlushness	Gap and Flushness analysis object class To create or edit an instance of this class, use GeometricAnalysis::GapFlushnessBuilder Created in NX5.0.0
GapFlushnessBuilder	GapFlushnessBuilder class <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateGapFlushnessBuilder GeometricAnalysis::AnalysisObjectCollection::CreateGapFlushnessBuilder @endlink <br> Default values
GeometricProperties	Represents the Geometric Properties class
CaeCurve	CAE Edge/Curve Geometric Properties
CaeFace	CAE Face Geometric Properties
Edge	Edge/Curve Geometric Properties
Face	Face Geometric Properties
HighlightLinesAnalysis	Represents a Highlight Lines Analysis object
HighlightLinesAnalysisBuilder	Represents a GeometricAnalysis::HighlightLinesAnalysis builder
LocalRadiusAnalysis	Builder for Local Radius Analysis (formerly Dynamic Radius) To create or edit an instance of this class, use GeometricAnalysis::LocalRadiusAnalysisBuilder Created in NX8.5.0
LocalRadiusAnalysisBuilder	Represents a @link GeometricAnalysis::LocalRadiusAnalysis GeometricAnalysis::LocalRadiusAnalysis@endlink builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateLocalRadiusAnalysisBuilder GeometricAnalysis::AnalysisObjectCollection::CreateLocalRadiusAnalysisBuilder @endlink <br> Default values
SectionAnalysisObject	Represents a Section Analysis object
SimpleInterference	Represents the Simple Interference object
SolidDensity	Represents a @link GeometricAnalysis::SolidDensity GeometricAnalysis::SolidDensity@endlink <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisManager::CreateSolidDensityObject GeometricAnalysis::AnalysisManager::CreateSolidDensityObject @endlink <br> Created in NX5.0.0
SurfaceAnalysisDisplay	Represents a tool control whether to show a surface's poles and knots To obtain an instance of this class, refer to GeometricAnalysis::AnalysisObjectCollection Created in NX6.0.0
SurfaceContinuityAnalysis	Represents a SurfaceContinuityAnalysis builder To create or edit an instance of this class, use GeometricAnalysis::SurfaceContinuityAnalysisBuilder Created in NX6.0.0
SurfaceContinuityAnalysisBuilder	Represents a @link GeometricAnalysis::SurfaceContinuityAnalysis GeometricAnalysis::SurfaceContinuityAnalysis@endlink builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceContinuityAnalysisBuilder GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceContinuityAnalysisBuilder @endlink <br> Default values
SurfaceIntersection	Represents a SurfaceIntersection builder To create or edit an instance of this class, use GeometricAnalysis::SurfaceIntersectionBuilder Created in NX7.5.0
SurfaceIntersectionBuilder	Represents a @link GeometricAnalysis::SurfaceIntersection GeometricAnalysis::SurfaceIntersection@endlink builder <br> To create a new instance of this class, use @link GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceIntersectionBuilder GeometricAnalysis::AnalysisObjectCollection::CreateSurfaceIntersectionBuilder @endlink <br> Default values
GeometricUtilities	Provides classes and interfaces for Geometric Utilities
AlignmentMethodBuilder	Represents a GeometricUtilities::AlignmentMethodBuilder
AlongPathPattern	AlongPath pattern definition
AlongSpineBuilder	Represents a GeometricUtilities::AlongSpineBuilder
AnchorLocatorBuilder	Represents a GeometricUtilities::AnchorLocatorBuilder Created in NX6.0.0
AngularLimits	Represents a angular limts data
AngularPatternSpacing	Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class
BetweenLocationsData	Represents a GeometricUtilities::BetweenLocationsData
BlendLimitsData	Represents a GeometricUtilities::BlendLimitsData
BlendSetbackBuilder	This class provides ability to define a setback curve on a blend face
BlendSetbackBuilderList	Represents a list of objects
BlendStopshortBuilder	Represents a GeometricUtilities::BlendStopshortBuilder
BlendStopshortBuilderCollection	This class contains the factory methods for creating an BlendStopshortBuilder
iterator	Iterator for accessing the contents of the collection
BooleanOperation	Represents a boolean operation
BooleanRegionSelect	Class which defines boolean region select
BooleanToolBuilder	Class which defines boolean tool builder
BoundaryDefinitionBuilder	Represents a GeometricUtilities::BoundaryDefinitionBuilder
BoundaryDefinitionBuilderList	Represents a list of objects
BoundingObjectBuilder	Represents a GeometricUtilities::BoundingObjectBuilder
BoundingObjectBuilderList	Represents a list of objects
BridgeCurveConnectivity	Data offering connectivity controls for Features::BridgeCurveBuilderEx
CAMDataPrepManager	Contains the create functions for builders
CircularCrossSection	Represents a circular section data for face blend
CircularFrameBuilder	Represents a GeometricUtilities::CircularFrameBuilder
CircularPattern	Circular pattern definition
CombOptionsBuilder	Represents a GeometricUtilities::CombOptionsBuilder
ConicCrossSection	Represents a conic section data for face blend
Continuity	Represents a GeometricUtilities::Continuity Allows user to specify continuity constraint surface construction
ControlPoleManagerData	This class manages the control poles for a set of surfaces or curves
ConvertFeatureGroupsToModulesBuilder	Represents a GeometricUtilities::ConvertFeatureGroupsToModulesBuilder builder To create a new instance of this class, use Features::FeatureCollection::CreateConvertFeatureGroupsToModulesBuilder Created in NX9.0.0
CurveExtendData	Represents a GeometricUtilities::CurveExtendData Created in NX5.0.0
CurveExtensionBuilder	Spline extension builder class
CurveFitData	Represents the curve fitting methods options
CurveFitJoin	Represents the curve fit join data
CurveFitOptions	Represents the curve fit data
CurveLengthData	Represents an CurveLength data
CurveLimitsData	Represents a GeometricUtilities::CurveLimitsData Created in NX5.0.0
CurveOptions	Represents the curve options data
CurveRangeBuilder	Represents the curve range and anchor builder Created in NX6.0.0
CurveShapingBuilder	Represents a GeometricUtilities::CurveShapingBuilder
DegreesAndSegmentsOrPatchesBuilder	DegreesAndSegmentsOrPatches builder Created in NX6.0.0
DepthSkewBuilder	This class provides ability to specify a depth and a skew value
DisplayResolutionBuilder	Represents a GeometricUtilities::DisplayResolutionBuilder
DistancePatternSpacing	Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class
DraftPointData	Represents a draft point data object To create an instance of this class, see DraftPointDataCollection::CreateDraftPointData Created in NX4.0.0
DraftVariableAngleData	Represents data containing variable angle draft point data objects This class will not be created by the user
EndHoleData	Represents a GeometricUtilities::EndHoleData Created in NX5.0.2
EntityUsageInfo	Represents a GeometricUtilities::EntityUsageInfo
EntityUsageInfoList	Represents a list of objects
Extend	Represents an extend data
ExtrudeRevolveToolBuilder	Class which is a sub-component of BooleanTool
FaceChangeOverflowBehavior	Represents a GeometricUtilities::FaceChangeOverflowBehavior It provides several face change options for controlling behavior when a change face overflows an incident face
FacePlaneSelectionBuilder	Represents a GeometricUtilities::FacePlaneSelectionBuilder
FacePlaneSelectionBuilderCollection	This class contains the factory methods for creating an FacePlaneSelectionBuilder
iterator	Iterator for accessing the contents of the collection
FacePlaneToolBuilder	Sub-component of BooleanToolBuilder
FaceSetData	Represents a GeometricUtilities::FaceSetData
FaceSetDataCollection	This class contains the factory methods for creating an FaceSetData
iterator	Iterator for accessing the contents of the collection
FaceSetOffset	This class represents a face set (collector) offset data
FaceSetOffsetCollection	This class contains the factory methods for creating an face set offset
iterator	Iterator for accessing the contents of the collection
FaceSetOffsetList	Represents a list of objects
FeatureOffset	Represents a Offset
FeatureOptions	Represents various options supported on features
FlowDirection	Represents a GeometricUtilities::FlowDirection Allows user to specify different flow direction to control output surface shape
FrameOnPathBuilder	Frame on path builder Created in NX7.5.1
GeneralPattern	General pattern definition
GeometryLocationData	Represents a GeometricUtilities::GeometryLocationData To create a new instance of this class, use GeometricUtilities::GeometryLocationDataCollection::CreateGeometryLocationData Created in NX5.0.0
GeometryLocationDataCollection	This class contains the factory methods for creating GeometryLocationData
iterator	Iterator for accessing the contents of the collection
HelixPattern	Helix pattern definition
HorizontalReference	Horizontal reference vector definition
IComponentBuilder	Represents a component contained in a builder
InstanceEditedExpressionItem	Edited value of one master expression of the input object(s) being patterned
InstanceEditedExpressionItemList	Represents a list of objects
InstanceEditedExpressionsList	List of GeometricUtilities::InstanceEditedExpressionItem objects
InteractiveSectionBuilder	Represents a GeometricUtilities::InteractiveSectionBuilder
LawBuilder	Represents a LawBuilder Created in NX5.0.0
Limits	Represents a limits data
LinearLimits	Represents a limits data
LocalUntrimBuilder	Represents a GeometricUtilities::LocalUntrimBuilder builder
LocalUntrimManager	Provides create builder methods for LocalUntrimBuilder To obtain an instance of this class, refer to Part Created in NX9.0.0
MatchSurfaceBuilder	Represents a @link GeometricUtilities::MatchSurfaceBuilder GeometricUtilities::MatchSurfaceBuilder@endlink builder.This builder's Commit can create a b-surface <br> To create a new instance of this class, use @link GeometricUtilities::CAMDataPrepManager::CreateMatchSurfaceBuilder GeometricUtilities::CAMDataPrepManager::CreateMatchSurfaceBuilder @endlink <br> Default values
MiddleHoleData	Represents a GeometricUtilities::MiddleHoleData Created in NX5.0.2
MirrorPattern	Mirror pattern definition
ModlAlongCurveAngle	This class GeometricUtilities::ModlAlongCurveAngle represents motion type in ModlMotion Created in NX8.5.0
ModlDistanceAngle	Represents a GeometricUtilities::ModlDistanceAngle
ModlMotion	Represents a GeometricUtilities::ModlMotion
MovePoleBuilder	This class manages the control poles movements for a surface or curve
MultiDraft	Represents a multi-draft
MultiTransitionLawBuilder	Represents multiple transition law
NestModuleBuilder	Represents a GeometricUtilities::NestModuleBuilder To create a new instance of this class, use Features::FeatureCollection::CreateNestModuleBuilder Created in NX9.0.0
NonInflectingLawBuilder	Represents a non-inflecting law
OnPathDimensionBuilder	Builds an on-path dimension Created in NX5.0.0
OnPathDimWithValueBuilder	Represents a GeometricUtilities::OnPathDimWithValueBuilder
OnPathDistancePatternSpacing	Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class
OrientationMethodBuilder	Represents a GeometricUtilities::OrientationMethodBuilder
OrientXpressBuilder	Represent the OrientXpress block OrientXpress is not supported in KF
ParentEquivalencyMap	Represents a GeometricUtilities::ParentEquivalencyMap
ParentEquivalencyMapList	Represents a list of objects
PartModuleInputBuilder	Represents a @link GeometricUtilities::PartModuleInputBuilder GeometricUtilities::PartModuleInputBuilder@endlink <br> To create a new instance of this class, use @link Features::PartModule::CreatePartModuleInputBuilder Features::PartModule::CreatePartModuleInputBuilder @endlink <br> Default values
PartModuleOutputBuilder	Represents a GeometricUtilities::PartModuleOutputBuilder To create a new instance of this class, use Features::PartModule::CreatePartModuleOutputBuilder Created in NX8.0.0
PartModuleOutputBuilder1	Represents a @link GeometricUtilities::PartModuleOutputBuilder1 GeometricUtilities::PartModuleOutputBuilder1@endlink <br> To create a new instance of this class, use @link Features::PartModule::CreatePartModuleOutputBuilder1 Features::PartModule::CreatePartModuleOutputBuilder1 @endlink <br> Default values
PartModuleReferencesBuilder	Represents a GeometricUtilities::PartModuleReferencesBuilder Created in NX8.0.0
PartModuleRelationshipBuilder	Represents a Features::PartModule builder To create a new instance of this class, use Features::FeatureCollection::CreatePartModuleRelationshipBuilder Created in NX8.0.0
PathLimits	Represents a path limits data
PatternClocking	enables the ability to apply delta transforms on individual instances of a pattern
PatternClockingBuilder	enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature <br> To create a new instance of this class, use @link GeometricUtilities::PatternDefinition::CreateClockingBuilder GeometricUtilities::PatternDefinition::CreateClockingBuilder @endlink <br> Default values
PatternDefinition	Pattern spacing for several pattern based commands
PatternFill	Pattern fill definition
PatternIncrementItem	Variational for one master expression of the input object(s) being patterned
PatternIncrementItemList	Represents a list of objects
PatternIncrementsBuilder	Pattern increments builder Created in NX7.5.0
PatternIncrementsList	List of GeometricUtilities::PatternIncrementItem objects
PatternInstanceEditBuilder	Pattern instance edit builder To create a new instance of this class, use GeometricUtilities::PatternDefinition::CreatePatternInstanceEditBuilder Created in NX7.5.0
PatternOrientation	Pattern orientation definition
PatternReferencePointServiceBuilder	Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations
PatternSpacing	Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class
PatternSpacingsList	List of GeometricUtilities::PatternSpacingsListItem objects
PatternSpacingsListItem	One pattern spacing in the spacings list To create a new instance of this class, use GeometricUtilities::PatternSpacingsList::CreatePatternSpacingsListItem Created in NX8.0.0
PatternSpacingsListItemList	Represents a list of objects
PointSetAlignmentBuilder	This class performs a point set to point set alignment <br> To create a new instance of this class, use @link Part::CreatePointSetAlignmentBuilder Part::CreatePointSetAlignmentBuilder @endlink <br> Default values
PointsFromFileBuilder	Represents a GeometricUtilities::PointsFromFileBuilder builder read points from a text file with format *.asc, *.txt, *.dat, *.pts To create a new instance of this class, use Part::CreatePointsFromFileBuilder Created in NX8.5.0
PolygonPattern	Polygon pattern definition
PolygonPatternSpacing	Defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class
ProjectionOptions	Represents a ProjectionOptions Created in NX4.0.0
QuadrilateralFrameBuilder	Represents a GeometricUtilities::QuadrilateralFrameBuilder Created in NX6.0.0
Rebuild	Represents a GeometricUtilities::Rebuild
RectangularFrameBuilder	Rectangular frame builder Created in NX7.5.1
RectangularPattern	Rectangular pattern definition
ReduceSurfaceRadiusBuilder	Reduce Surface Radius Builder of Geometric Utilities
ReduceSurfaceRadiusFaceGroupBuilder	Reduce Surface Radius Face Group Builder of Geometric Utilities
ReduceSurfaceRadiusFaceGroupBuilderList	Represents a list of objects
ReferencePattern	Reference pattern definition
RefitControlBuilder	This class is used to specify the parameter set to refit faces Created in NX6.0.0
RegionTracker	Class which collects all the geometric entities used to identify a region of faces during a boolean feature
RenameLinkedPartModulePartBuilder	Represents a Features::PartModule builder To create a new instance of this class, use Features::FeatureCollection::CreateRenameLinkedPartModulePartBuilder Created in NX9.0.0
ReplAsstBuilder	Represents a GeometricUtilities::ReplAsstBuilder
RotationSetBuilder	Represents a GeometricUtilities::RotationSetBuilder
RotationSetBuilderList	Represents a list of objects
SaveConstraintsBuilder	Represents a builder for a Save Constraints
ScalingMethodBuilder	Represents a GeometricUtilities::ScalingMethodBuilder
ScalingSetBuilder	Represents a GeometricUtilities::ScalingSetBuilder
ScalingSetBuilderList	Represents a list of objects
SecondarySectionData	Represents a GeometricUtilities::SecondarySectionData
SectionPlaneData	Represents a Section Plane Data class This class acts like a container to hold the data needed to create a plane
SelectDividingObjectBuilder	Represents the dividing tool block for dividing face Created in NX9.0.0
SelectionList	Represents a GeometricUtilities::SelectionList To create a new instance of this class, use Part::CreateSelectionList Created in NX8.0.0
SelectionListList	Represents a list of objects
ShapeFrameBuilder	Represents a GeometricUtilities::ShapeFrameBuilder Created in NX6.0.0
SimpleDraft	Represents an Offset
SmartVolumeProfileBuilder	This class contains the options for automatically closing the profile to surrounding model geometry
SnipIntoPatchesBuilder	Represents a GeometricUtilities::SnipIntoPatchesBuilder builder
SpineDefinitionBuilder	Provides a spine definition for modeling operations Created in NX8.5.0
SpinePointData	Represents a spine point def object To create an instance of this class, see GeometricUtilities::SpinePointDataCollection Created in NX5.0.0
SpinePointDataCollection	This class contains the factory methods for creating a SpinePointData object
iterator	Iterator for accessing the contents of the collection
SpiralPattern	Spiral pattern definition
SplineExtensionBuilder	Spline extension builder class
SShapedLawBuilder	Represents a s-shaped law
StartHoleData	Represents a GeometricUtilities::StartHoleData Created in NX5.0.2
StepOptionBehavior	Represents a GeometricUtilities::StepOptionBehavior It provides several step options for controlling behavior when move face and so on
StyledSweepDoubleOnPathDimBuilder	Represents a GeometricUtilities::StyledSweepDoubleOnPathDimBuilder
StyledSweepDoubleOnPathDimBuilderList	Represents a list of objects
StyledSweepReferenceMethodBuilder	Represents a GeometricUtilities::StyledSweepReferenceMethodBuilder
SupportPlaneData	Represents a GeometricUtilities::SupportPlaneData Created in NX5.0.0
SurfaceRangeBuilder	Represents the surface range and anchor builder Created in NX6.0.0
TangentMagnitudeBuilder	This class provides ability to specify the start and end tangent magnitude values
TransformerData	Transformation and orientation tool
TransitionCurveBuilder	This class provides ability to create a transition(bridge) curve between two adjacent setback curves
TransitionCurveBuilderList	Represents a list of objects
TransitionLawNodeBuilder	Represents a law node with transition type
TransitionLawNodeBuilderList	Represents a list of objects
TriangularFrameBuilder	Represents a GeometricUtilities::TriangularFrameBuilder
TwoExpressionsCollectorSet	Represents a two dimension list item builder To create a new instance of this class, use Part::CreateEmptyTwoExpressionsCollectorSet Created in NX8.5.0
TwoExpressionsCollectorSetList	Represents a list of objects
TwoExpressionsSectionSet	Represents a two dimension list section item builder To create a new instance of this class, use Part::CreateEmptyTwoExpressionsSectionSet Created in NX9.0.0
TwoExpressionsSectionSetList	Represents a list of objects
UnnestModuleBuilder	Represents a GeometricUtilities::UnnestModuleBuilder To create a new instance of this class, use Features::FeatureCollection::CreateUnnestModuleBuilder Created in NX9.0.0
WaveLinkRepository	Represents a GeometricUtilities::WaveLinkRepository
Issue	Provides classes and interfaces for Issue Management
IssueAttachment	Represents the Issue Attachment object
IssueContent	Represents the Issue Issue object
IssueContentBuilder	Represents a @link Issue::IssueContent Issue::IssueContent@endlink builder <br> To create a new instance of this class, use @link Issue::IssueManager::CreateIssueContentBuilder Issue::IssueManager::CreateIssueContentBuilder @endlink <br> Default values
IssueFolder	Represents the Issue Folder object
IssueList	Represents the Issue List object
IssueListCollection	Represents a Issue::IssueListCollection To obtain an instance of this class, refer to Issue::IssueManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
IssueManager	Contains the collection objects for creating and iterating over issue objects
IssueProperty	Represents the Issue Property object
IssueSite	Represents the Issue Site object
SnapshotSubsetBuilder	Used to create or edit issue snapshot subset
SnapshotWorksetBuilder	Used to create or edit issue snapshot workset which is a container to hold all the corresponding parts to represent an issue
Layer	Provides classes and interfaces for layer
Category	Represents a layer category
CategoryCollection	Represents a collection of layer categories To obtain an instance of this class, refer to BasePart Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
LayerManager	Represents an object that manages layers To obtain an instance of this class, refer to BasePart Created in NX3.0.0
StateCollection	Represents a copy of the layer states
StateInfo	Used in several methods that get or set the state of a layer
Layout2d	Provides classes and interfaces for Layout2D
Component	Represents the Component object
ComponentCollection	Represents a collection of Layout2d::Component s
iterator	Iterator for accessing the contents of the collection
ComponentDefinition	Represents a component definition
ComponentDefinitionCollection	Represents a collection of Layout2d::ComponentDefinition objects
iterator	Iterator for accessing the contents of the collection
ComponentNameBuilder	This class is used to construct the component name and part file name block, if it is in manage mode, we also have item number, item revision and item name
ComponentSettingsBlockBuilder	Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder)
ComponentSettingsBuilder	Represents a Layout2d::ComponentSettingsBuilder This builder stores the information of the 2d component settings
DefineComponentAnchorPointBuilder	Represents a Builder for Define Component Anchor Point functionality which will define the anchor point location of a 2D Component instance To create a new instance of this class, use Layout2d::ComponentCollection::CreateDefineComponentAnchorPointBuilder Created in NX9.0.0
DefineComponentBuilder	Represents a Builder for Define 2D component functionality which will define a 2D Component and stores its definition in the Reuse Library <br> To create a new instance of this class, use @link Layout2d::ComponentCollection::CreateDefineComponentBuilder Layout2d::ComponentCollection::CreateDefineComponentBuilder @endlink <br> Default values
EditComponentSettingsBuilder	Represents a Layout2d::EditComponentSettingsBuilder builder
InsertComponentBuilder	Represents a Builder for Insert Component functionality which will insert a 2D Component instance in the active sketch To create a new instance of this class, use Layout2d::ComponentCollection::CreateInsertComponentBuilder Created in NX9.0.0
LocalDefinitionFolder	Represents a local definition folder
LocalDefinitionFolderBuilder	Represents a Layout2d::LocalDefinitionFolderBuilder
LocalDefinitionFolderCollection	Represents a collection of Layout2d::LocalDefinitionFolder objects
iterator	Iterator for accessing the contents of the collection
MakeComponentUniqueBuilder	Represents a Builder for Make 2D component unique functionality which will create a new definition of the selected 2D Component instance <br> To create a new instance of this class, use @link Layout2d::ComponentCollection::CreateMakeComponentUniqueBuilder Layout2d::ComponentCollection::CreateMakeComponentUniqueBuilder @endlink <br> Default values
NewComponentBuilder	Represents a Builder for New 2D component functionality which will create an empty 2D Component instance and stores its definition in the Local 2D Component folder To create a new instance of this class, use Layout2d::ComponentCollection::CreateNewComponentBuilder Created in NX9.0.0
PublishComponentBuilder	Represents a Builder for Publish 2D component functionality which will allow local definitions to be exported into external storage locations To create a new instance of this class, use Layout2d::ComponentCollection::CreatePublishComponentBuilder Created in NX9.0.0
ReplaceComponentBuilder	Represents a Builder for Replace 2D component functionality which will replaces the selected 2D Component contents from another 2D Component definition
SelectComponent	Represents a single object selection
SelectComponentList	Represents a list of objects on a selection list
SmashComponentBuilder	Represents a Builder for Smash 2D component functionality which will break instances of 2D Components into its constituent pieces, we can have multiple committed objects To create a new instance of this class, use Layout2d::ComponentCollection::CreateSmashComponentBuilder Created in NX9.0.0
Mechatronics	Provides classes and interfaces for Mechatronics
AdapterFormula	Represents the Adapter Formula class
AdapterFormulaBuilder	Represents a Mechatronics::AdapterFormulaBuilder
AdapterFormulaCollection	Represents a collection of Adapter Formula
iterator	Iterator for accessing the contents of the collection
AdapterSignal	Represents the Adapter Signal class
AdapterSignalBuilder	Represents a Mechatronics::AdapterSignalBuilder
AdapterSignalCollection	Represents a collection of Adapter Signal
iterator	Iterator for accessing the contents of the collection
AddComponentBuilder	Represents a Mechatronics::AddComponentBuilder To create a new instance of this class, use Mechatronics::FunctionObjectCollection::CreateAddComponentBuilder Created in NX7.5.1
AngularLimitJoint	Represents the Angular Limit Joint
AngularLimitJointBuilder	Represents a Mechatronics::AngularLimitJoint builder
AngularLimitJointCollection	Represents a collection of Angular Limit Joint
iterator	Iterator for accessing the contents of the collection
AngularSpringJoint	Represents the Angular Spring Joint
AngularSpringJointBuilder	Represents a Mechatronics::AngularSpringJoint builder
AngularSpringJointCollection	Represents a collection of Angular Spring Joint
iterator	Iterator for accessing the contents of the collection
BallJoint	Represents the Ball Joint
BallJointBuilder	Represents a Mechatronics::BallJoint builder
BallJointCollection	Represents a collection of Ball Joint
iterator	Iterator for accessing the contents of the collection
BreakingConstraint	Represents the Breaking Constraint
BreakingConstraintBuilder	Represents a Mechatronics::BreakingConstraint builder
BreakingConstraintCollection	Represents a collection of Breaking Constraint
iterator	Iterator for accessing the contents of the collection
Cam	Represents the Cam Constraint
CamBuilder	Represents a Mechatronics::Cam builder
CamCollection	Represents a collection of Cam
iterator	Iterator for accessing the contents of the collection
CamProfile	Represents the CamProfile class
CamProfileBuilder	Represents a Mechatronics::CamProfile builder
Element	Contains segment information of a motion segment
CamProfileCollection	Represents a collection of Cam Profile
iterator	Iterator for accessing the contents of the collection
ChangeMaterial	Represents the Change material constraint
ChangeMaterialBuilder	Represents a Mechatronics::ChangeMaterial builder
ChangeMaterialCollection	Represents a collection of Change Material Constraint
iterator	Iterator for accessing the contents of the collection
CollisionBody	Represents the Collision Body class
CollisionBodyBuilder	Represents a Mechatronics::CollisionBodyBuilder
CollisionBodyCollection	Represents a collection of Collision Bodies
iterator	Iterator for accessing the contents of the collection
CollisionMaterial	Represents the Collision Material class
CollisionMaterialBuilder	Represents a Mechatronics::CollisionMaterial builder
CollisionMaterialCollection	Represents a collection of Collision Material
iterator	Iterator for accessing the contents of the collection
CollisionSensor	Represents the Collision Sensor
CollisionSensorBuilder	Represents a Mechatronics::CollisionSensor builder
CollisionSensorCollection	Represents a collection of Collision Sensor
iterator	Iterator for accessing the contents of the collection
CollisionShapeBuilder	This is an abstract class, and cannot be created
ComparisonResult	Represents comparison result Created in NX9.0.0
ComparisonResultAttribute	Represents attribute of comparison result Created in NX9.0.0
ComparisonResultBase	Represents base object of comparison result Created in NX9.0.0
ComparisonResultContext	Represents context of comparison results Created in NX9.0.0
ComparisonResultElectricalPart	Represents electrical part of comparison result Created in NX9.0.0
ConvertFromMTBBuilder	Represents a Mechatronics::ConvertFromMTBBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateConvertFromMtbbuilder Created in NX9.0.0
Coupling	Represents the mechatronics coupling class
CouplingBuilder	This is an abstract class, and cannot be created
CurveOnCurveJoint	Represents the CurveOnCurve Joint
CurveOnCurveJointBuilder	Represents a @link Mechatronics::CurveOnCurveJoint Mechatronics::CurveOnCurveJoint@endlink builder <br> To create a new instance of this class, use @link Mechatronics::CurveOnCurveJointCollection::CreateCurveOnCurveJointBuilder Mechatronics::CurveOnCurveJointCollection::CreateCurveOnCurveJointBuilder @endlink <br> Default values
CurveOnCurveJointCollection	Represents a collection of CurveOnCurve Joint
iterator	Iterator for accessing the contents of the collection
CylindricalJoint	Represents the Cylindrical Joint
CylindricalJointBuilder	Represents a Mechatronics::CylindricalJoint builder
CylindricalJointCollection	Represents a collection of Cylindrical Joint
iterator	Iterator for accessing the contents of the collection
DependencyCreatorBuilder	Represents a Mechatronics::DependencyCreatorBuilder builder
ECADExportBuilder	Represents a Mechatronics::ECADExportBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateECADExportBuilder Created in NX8.5.0
ECADImportBuilder	Represents a Mechatronics::ECADImportBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateECADImportBuilder Created in NX8.5.0
ElectricalPart	Electrical Part holds the part attributes for communicating with EPLAN
ElectricalPartBuilder	Represents a Mechatronics::ElectricalPart builder To create a new instance of this class, use Mechatronics::ElectricalPartCollection::CreateElectricalPartBuilder Created in NX9.0.0
Attribute	Defined Attribute Structure
ElectricalPartCollection	Represents a Mechatronics::ElectricalPartCollection To obtain an instance of this class, refer to Mechatronics::MechatronicsManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
ExternalConnection	Represents the External Connection class
ExternalConnectionBuilder	Represents a Mechatronics::ExternalConnection builder To create a new instance of this class, use Mechatronics::ExternalConnectionCollection::CreateExternalConnectionBuilder Created in NX8.0.0
ExternalConnectionCollection	Represents a collection of External Connection
iterator	Iterator for accessing the contents of the collection
ExternalConnectionElement	Represents the External Connection Element class
ExternalConnectionElementBuilder	Represents a Mechatronics::ExternalConnectionElementBuilder builder To create a new instance of this class, use Mechatronics::ExternalConnectionCollection::CreateExternalConnectionElementBuilder Created in NX8.0.1
ExternalConnectionElementBuilderList	Represents a list of objects
FixedJoint	Represents the Fixed Joint
FixedJointBuilder	Represents a Mechatronics::FixedJoint builder
FixedJointCollection	Represents a collection of Fixed Joint
iterator	Iterator for accessing the contents of the collection
FunctionObject	Represents the Function object
FunctionObjectBuilder	Represents a Mechatronics::FunctionObjectBuilder To create a new instance of this class, use Mechatronics::FunctionObjectCollection::CreateFunctionObjectBuilder Created in NX7.5.1
ParameterData	Defined Parameter Data Structure
RequirementData	Defined Requirement Data Structure
FunctionObjectCollection	Represents a Mechatronics::FunctionObjectCollection To obtain an instance of this class, refer to Mechatronics::MechatronicsManager Created in NX7.5.1
iterator	Iterator for accessing the contents of the collection
GanttCollection	Represents a Mechatronics::GanttCollection To obtain an instance of this class, refer to Part Created in NX7.5.1
iterator	Iterator for accessing the contents of the collection
GanttExportPLCopenBuilder	Represents a @link Mechatronics::GanttOperationObject Mechatronics::GanttOperationObject@endlink builder <br> To create a new instance of this class, use @link Mechatronics::GanttCollection::CreateGanttExportPlcopenBuilder Mechatronics::GanttCollection::CreateGanttExportPlcopenBuilder @endlink <br> Default values
GanttOperationBuilder	Represents a Mechatronics::GanttOperationBuilder builder To create a new instance of this class, use Mechatronics::GanttCollection::CreateGanttOperationBuilder Created in NX7.5.1
GanttOperationConditionBuilder	Represents a Mechatronics::GanttOperationConditionBuilder To create a new instance of this class, use Mechatronics::GanttCollection::CreateGanttOperationConditionBuilder Created in NX7.5.1
GanttOperationConditionBuilderList	Represents a list of objects
GanttOperationObject	Represents the Gantt Operation object
GanttOperationParameterBuilder	Represents a Mechatronics::GanttOperationParameterBuilder To create a new instance of this class, use Mechatronics::GanttCollection::CreateGanttOperationParameterBuilder Created in NX7.5.1
GanttOperationParameterBuilderList	Represents a list of objects
Gear	Represents the Gear
GearBuilder	Represents a Mechatronics::Gear builder
GearCollection	Represents a collection of Gears
iterator	Iterator for accessing the contents of the collection
GraphControl	Represents the Graph Control
GraphControlBuilder	Represents a Mechatronics::GraphControl builder To create a new instance of this class, use Mechatronics::GraphControlCollection::CreateGraphControlBuilder Created in NX8.0.0
GraphControlCollection	Represents a collection of Graph Control
iterator	Iterator for accessing the contents of the collection
HingeJoint	Represents the Hinge Joint
HingeJointBuilder	Represents a Mechatronics::HingeJoint builder
HingeJointCollection	Represents a collection of Hinge Joint
iterator	Iterator for accessing the contents of the collection
LinearLimitJoint	Represents the Linear Limit Joint
LinearLimitJointBuilder	Represents a Mechatronics::LinearLimitJoint builder
LinearLimitJointCollection	Represents a collection of Linear Limit Joint
iterator	Iterator for accessing the contents of the collection
LinearSpringJoint	Represents the Linear Spring Joint
LinearSpringJointBuilder	Represents a Mechatronics::LinearSpringJoint builder
LinearSpringJointCollection	Represents a collection of Linear Spring Joint
iterator	Iterator for accessing the contents of the collection
LogicObject	Represents the Logic Object class
LogicObjectBuilder	Represents a Mechatronics::LogicObject builder To create a new instance of this class, use Mechatronics::LogicObjectCollection::CreateLogicObjectBuilder Created in NX8.5.0
ParameterData	Defined Parameter Data Structure
LogicObjectCollection	Represents a Mechatronics::LogicObjectCollection To obtain an instance of this class, refer to Mechatronics::MechatronicsManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
MechatronicsManager	Contains the collection objects for creating and iterating over Mechatronics Designer System Navigator objects
MechatronicsSession	Represents Mechatronics session To obtain an instance of this class, refer to Session Created in NX9.0.0
MotionProfile	Represents the MotionProfile class
MotionProfileBuilder	Represents a Mechatronics::MotionProfile builder
MotionProfileCollection	Represents a collection of Motion Profile
iterator	Iterator for accessing the contents of the collection
ObjectInformationBuilder	Represents a Mechatronics::ObjectInformationBuilder This is a sub-builder class and cannot be directly instantiated Created in NX8.5.0
ObjectSink	Represents the Object Sink
ObjectSinkBuilder	Represents a Mechatronics::ObjectSink builder
ObjectSinkCollection	Represents a collection of Object Sink
iterator	Iterator for accessing the contents of the collection
ObjectSource	Represents the Object Source
ObjectSourceBuilder	Represents a Mechatronics::ObjectSource builder
ObjectSourceCollection	Represents a collection of Object Source
iterator	Iterator for accessing the contents of the collection
OPCClientBuilder	Represents a Mechatronics::OPCClientBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateOpcclientBuilder Created in NX8.0.0
TagAttribute	Attribute of OPC item
PhysicsConstraint	Represents the mechatronics constraint class
PhysicsConstraintBuilder	This is an abstract class, and cannot be created
PhysicsJoint	Represents the mechatronics joint class
PhysicsJointBuilder	Represents a base builder for Physics Joints
PhysicsManager	A manager to deal with all physics objects
PhysicsPreference	Represents the Physics Preference class
PhysicsPreferenceCollection	Represents a collection of Physics Preference
iterator	Iterator for accessing the contents of the collection
PMNavFolderLocator	Represents the PMNav Folder Locator
PMNavFolderLocatorCollection	Represents a Mechatronics::PMNavFolderLocatorCollection To obtain an instance of this class, refer to Mechatronics::PhysicsManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
PMNavFolderObject	Represents the PMNav Folder object
PMNavFolderObjectCollection	Represents a Mechatronics::PMNavFolderObjectCollection To obtain an instance of this class, refer to Mechatronics::PhysicsManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
PointOnCurveJoint	Represents the PointOnCurve Joint
PointOnCurveJointBuilder	Represents a @link Mechatronics::PointOnCurveJoint Mechatronics::PointOnCurveJoint@endlink builder <br> To create a new instance of this class, use @link Mechatronics::PointOnCurveJointCollection::CreatePointOnCurveJointBuilder Mechatronics::PointOnCurveJointCollection::CreatePointOnCurveJointBuilder @endlink <br> Default values
PointOnCurveJointCollection	Represents a collection of PointOnCurve Joint
iterator	Iterator for accessing the contents of the collection
PositionControl	Represents the Position Control
PositionControlBuilder	Represents a Mechatronics::PositionControlBuilder
PositionControlCollection	Represents a collection of Position Control
iterator	Iterator for accessing the contents of the collection
PreferencesBuilder	Represents a Mechatronics::PreferencesBuilder builder
PreventCollision	Represents the Prevent Collision Constraint
PreventCollisionBuilder	Represents a Mechatronics::PreventCollision builder
PreventCollisionCollection	Represents a collection of Prevent Collision Constraint
iterator	Iterator for accessing the contents of the collection
ProxyObject	Represents the Proxy Object class
ProxyObjectBuilder	Represents a Mechatronics::ProxyObjectBuilder
ProxyObjectCollection	Represents a collection of Proxy Object
iterator	Iterator for accessing the contents of the collection
ProxyObjectParameterBuilder	Represents a Mechatronics::ProxyObjectParameterBuilder
ProxyObjectParameterBuilderList	Represents a list of objects
ProxyOverrideObject	Represents the Proxy Override Object class
ProxyOverrideObjectBuilder	Represents a Mechatronics::ProxyOverrideObjectBuilder
ProxyOverrideObjectCollection	Represents a collection of Proxy Override Object
iterator	Iterator for accessing the contents of the collection
ReplacePhysicsBuilder	Represents a Mechatronics::ReplacePhysicsBuilder builder
Requirement	Represents the Requirement class
RequirementBuilder	Represents a Mechatronics::Requirement builder To create a new instance of this class, use Mechatronics::RequirementCollection::CreateRequirementBuilder Created in NX8.5.0
RequirementCollection	Represents a Mechatronics::RequirementCollection To obtain an instance of this class, refer to Mechatronics::MechatronicsManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
RigidBody	Represents the Rigid Body class
RigidBodyBuilder	Represents a Mechatronics::RigidBodyBuilder
RigidBodyCollection	Represents a collection of Rigid Body
iterator	Iterator for accessing the contents of the collection
RuntimeBehavior	Represents the Runtime Behavior class
RuntimeBehaviorBuilder	Represents a Mechatronics::RuntimeBehaviorBuilder
RuntimeBehaviorCollection	Represents a collection of Runtime Behavior
iterator	Iterator for accessing the contents of the collection
RuntimeFormula	Represents the Runtime Formula class
RuntimeFormulaBuilder	Represents a Mechatronics::RuntimeFormulaBuilder
RuntimeFormulaCollection	Represents a collection of RuntimeFormula
iterator	Iterator for accessing the contents of the collection
RuntimeFormulaParameter	Represents the Runtime Formula Parameter class
RuntimeFormulaParameterBuilder	Represents a Mechatronics::RuntimeFormulaParameterBuilder builder To create a new instance of this class, use Mechatronics::RuntimeFormulaCollection::CreateRuntimeFormulaParameterBuilder Created in NX8.5.0
RuntimeFormulaParameterBuilderList	Represents a list of objects
RuntimeNCBuilder	Represents a Mechatronics::RuntimeNCBuilder
RuntimeNCCollection	Represents a collection of Runtime NC
iterator	Iterator for accessing the contents of the collection
RuntimeNCObject	Represents the RuntimeNCObject class
SCOUTExportBuilder	Represents a Mechatronics::SCOUTExportBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateSCOUTExportBuilder Created in NX9.0.0
SCOUTImportBuilder	Represents a Mechatronics::SCOUTImportBuilder , Nothing happened and no object returned when commit this builder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateSCOUTImportBuilder Created in NX9.0.0
SelectCollisionSensorList	Represents a list of objects on a selection list
SelectLogicObjectList	Represents a list of objects on a selection list
SelectPhysicsConstraint	Represents a single object selection
SelectPhysicsJoint	Represents a single object selection
SelectSystemObject	Represents a single object selection
SHMConfigurationBuilder	Represents a Mechatronics::SHMConfigurationBuilder builder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateSHMConfigurationBuilder Created in NX9.0.0
SHMSignalConnection	Represents the SHM Signal connection class
SHMSignalConnectionBuilder	Represents a Mechatronics::SHMSignalConnectionBuilder To create a new instance of this class, use Mechatronics::SHMSignalConnectionCollection::CreateSHMSignalConnectionBuilder Created in NX9.0.0
SHMSignalConnectionBuilderList	Represents a list of objects
SHMSignalConnectionCollection	Represents a collection of SHM Signal Connection
iterator	Iterator for accessing the contents of the collection
SignalAdapter	Represents the Signal Adapter class
SignalAdapterBuilder	Represents a Mechatronics::SignalAdapterBuilder
ParameterData	Defines the parameter data
SignalData	Defines the signal data
SignalAdapterCollection	Represents a collection of Signal Adapter
iterator	Iterator for accessing the contents of the collection
SignalConnection	Represents the Signal connection class
SignalConnectionBuilder	Represents a Mechatronics::SignalConnectionBuilder To create a new instance of this class, use Mechatronics::SignalConnectionCollection::CreateSignalConnectionBuilder Created in NX8.5.0
SignalConnectionBuilderList	Represents a list of objects
SignalConnectionCollection	Represents a collection of Signal Connection
iterator	Iterator for accessing the contents of the collection
SignalMappingBuilder	Represents a Mechatronics::SignalMappingBuilder To create a new instance of this class, use Mechatronics::PhysicsManager::CreateSignalMappingBuilder Created in NX8.5.0
SlidingJoint	Represents the Sliding Joint
SlidingJointBuilder	Represents a Mechatronics::SlidingJoint builder
SlidingJointCollection	Represents a collection of Sliding Joint
iterator	Iterator for accessing the contents of the collection
SpeedControl	Represents the Speed Control
SpeedControlBuilder	Represents a Mechatronics::SpeedControl builder
SpeedControlCollection	Represents a collection of Speed Constraint
iterator	Iterator for accessing the contents of the collection
SystemObject	Represents the System Object
SystemObjectBuilder	Represents a Mechatronics::SystemObject builder This is an abstract class and cannot be created
SystemRoot	Represents the System Root class
TransportSurface	Represents the Transport Surface class
TransportSurfaceBuilder	Represents a Mechatronics::TransportSurfaceBuilder
TransportSurfaceCollection	Represents a collection of Transport Surface
iterator	Iterator for accessing the contents of the collection
MenuBar	Provides classes and interfaces for the Menu Bar
ContextMenu	Represents a Context Menu Created in NX8.5.0
ContextMenuEntry	Represents an entry on a context menu
ContextMenuProperties	Provides information about the MenuBar.ContextMenu object being customized
MenuBarManager	Interface for the MenuBarManager object To obtain an instance of this class, refer to UI Created in NX6.0.0
MenuButton	Implements the Object for Menu Buttons Created in NX6.0.0
MenuButtonEvent	Implements the Event Object for Menu Buttons Created in NX6.0.0
ModlDirect	Provides classes and interfaces for Direct Modeling
SelectBlend	Represents a ModlDirect::SelectBlend Allows user to specify blend faces
Motion	Provides classes and interfaces for Motion Simulation
AdamsSolverProperty	Represents a Motion::AdamsSolverProperty Created in NX5.0.0
AnimationControl	Represents the Motion::AnimationControl An instance of this class can not be obtained Created in NX9.0.0
ArticulationControl	Represents the Motion::ArticulationControl An instance of this class can not be obtained Created in NX9.0.0
BodyContact	Represents a Motion::BodyContact To create or edit an instance of this class, use Motion::BodyContactBuilder Created in NX5.0.0
BodyContactAdams	Represents a Motion::BodyContactAdams Created in NX5.0.0
BodyContactBuilder	Represents a @link Motion::BodyContactBuilder Motion::BodyContactBuilder@endlink <br> To create a new instance of this class, use @link Motion::BodyContactCollection::CreateBodyContactBuilder Motion::BodyContactCollection::CreateBodyContactBuilder @endlink <br> Default values
BodyContactCollection	Represents a collection of 3D contact objects.Any contact object must be created and found through this class To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
BodyContactRecurdyn	Represents a Motion::BodyContactRecurdyn Created in NX5.0.0
Bushing	Represents a bushing To create or edit an instance of this class, use Motion::BushingBuilder Created in NX6.0.0
BushingBuilder	Represents a Motion BushingBuilder <br> To create a new instance of this class, use @link Motion::BushingCollection::CreateBushingBuilder Motion::BushingCollection::CreateBushingBuilder @endlink <br> Default values
BushingCoefficients	Represents a Motion BushingCoefficients
BushingCollection	Represents a collection of motion joints To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
BushingCylindricalCoefficients	Represents a Motion BushingCylindricalCoefficients
BushingCylindricalCoefficientsComponent	Represents a Motion BushingCylindricalCoefficientsComponent
BushingDefine	Represents a Motion BushingDefine Created in NX6.0.0
BushingGeneralCoefficients	Represents a Motion BushingGeneralCoefficients
BushingGeneralCoefficientsComponent	Represents a Motion BushingGeneralCoefficientsComponent
Connector	Represents a connector This is an abstract class, and cannot be created
ConnectorBuilder	Represents ConnectorBuilder This is an abstract class, and cannot be created
Coupler	Represents a motion coupler object This is an abstract class, and cannot be created
CouplerBuilder	Represents a Motion::CouplerBuilder This is an abstract class, and cannot be created
CouplerCable	Represents a motion cable object To create or edit an instance of this class, use Motion::CouplerCableBuilder Created in NX6.0.0
CouplerCableBuilder	Represents a @link Motion::CouplerCableBuilder Motion::CouplerCableBuilder@endlink <br> To create a new instance of this class, use @link Motion::CouplerCollection::CreateCouplerCableBuilder Motion::CouplerCollection::CreateCouplerCableBuilder @endlink <br> Default values
CouplerCollection	Represents a collection of motion couplers To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
CouplerGear	Represents a motion gear object To create or edit an instance of this class, use Motion::CouplerGearBuilder Created in NX6.0.0
CouplerGearBuilder	Represents a @link Motion::CouplerGearBuilder Motion::CouplerGearBuilder@endlink <br> To create a new instance of this class, use @link Motion::CouplerCollection::CreateCouplerGearBuilder Motion::CouplerCollection::CreateCouplerGearBuilder @endlink <br> Default values
CouplerRckpn	Represents a motion rack and pinion object To create or edit an instance of this class, use Motion::CouplerRckpnBuilder Created in NX6.0.0
CouplerRckpnBuilder	Represents a @link Motion::CouplerRckpnBuilder Motion::CouplerRckpnBuilder@endlink <br> To create a new instance of this class, use @link Motion::CouplerCollection::CreateCouplerRckpnBuilder Motion::CouplerCollection::CreateCouplerRckpnBuilder @endlink <br> Default values
CurveContact	Represents a Motion::CurveContact To create or edit an instance of this class, use Motion::CurveContactBuilder Created in NX5.0.0
CurveContactAdams	Represents a Motion::CurveContactAdams Created in NX5.0.0
CurveContactBuilder	Represents a @link Motion::CurveContactBuilder Motion::CurveContactBuilder@endlink <br> To create a new instance of this class, use @link Motion::CurveContactCollection::CreateCurveContactBuilder Motion::CurveContactCollection::CreateCurveContactBuilder @endlink <br> Default values
CurveContactCollection	Represents a collection of 2D contact objects.Any 2D contact object must be created and found through this class To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
CurveContactRecurdyn	Represents a Motion::CurveContactRecurdyn Created in NX5.0.0
CurveOnCurve	Represents a curve on curve To create or edit an instance of this class, use Motion::CurveOnCurveBuilder Created in NX6.0.0
CurveOnCurveBuilder	Represents a Motion::CurveOnCurveBuilder To create a new instance of this class, use Motion::CurveOnCurveCollection::CreateCurveOnCurveBuilder Created in NX6.0.0
CurveOnCurveCollection	Represents a collection of curve on curve objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
Damper	Represents a damper To create or edit an instance of this class, use Motion::DamperBuilder Created in NX6.0.0
DamperBuilder	Represents a DamperBuilder To create a new instance of this class, use Motion::DamperCollection::CreateDamperBuilder Created in NX6.0.0
DamperCollection	Represents a collection of motion damper To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
DriverMultiOperations	Represents a Motion::DriverMultiOperations Created in NX6.0.0
DriverOperation	Represents a Motion::DriverOperation Created in NX5.0.0
FlexBody	Represents the Motion FlexBody class.It must be associated with a Motion Link
FlexBodyBuilder	Represents a @link Motion::FlexBody Motion::FlexBody@endlink builder <br> To create a new instance of this class, use @link Motion::FlexBodyCollection::CreateFlexBodyBuilder Motion::FlexBodyCollection::CreateFlexBodyBuilder @endlink <br> Default values
FlexBodyCollection	Represents a collection of flexible body objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
FlexPhysicalDampingSettings	Represents the physical damping settings for flexible body Created in NX7.5.0
GeneralCoupler	Represents motion 2-3 joint coupler To create or edit an instance of this class, use Motion::GeneralCouplerBuilder Created in NX7.5.0
GeneralCouplerBuilder	Represents a @link Motion::GeneralCouplerBuilder Motion::GeneralCouplerBuilder@endlink <br> To create a new instance of this class, use @link Motion::GeneralCouplerCollection::CreateGeneralCouplerBuilder Motion::GeneralCouplerCollection::CreateGeneralCouplerBuilder @endlink <br> Default values
GeneralCouplerCollection	Represents a collection of 2-3 joint coupler objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
Graph	Represents a graph, only creation is supported To create or edit an instance of this class, use Motion::GraphBuilder Created in NX5.0.0
GraphBuilder	Represents a Motion::GraphBuilder , only creation is supported To create a new instance of this class, use Motion::GraphManager::CreateGraphBuilder Created in NX5.0.0
CurveData	Contains the structure of curve associated with curve data
GraphManager	Represents a collection of Graph objects, only creation is supported To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
Joint	Represents a motion joint object To create or edit an instance of this class, use Motion::JointBuilder Created in NX5.0.0
JointBuilder	This builder class is used to create or edit Motion::Joint objects
JointCollection	Represents a collection of motion joints To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
JointDefine	Represents a joint define object Created in NX5.0.0
JointDriver	Represents a joint driver To create or edit an instance of this class, use Motion::JointDriverBuilder Created in NX5.0.0
JointDriverBuilder	Represents a Motion::JointDriverBuilder To create a new instance of this class, use Motion::JointDriverCollection::CreateJointDriverBuilder Created in NX5.0.0
JointDriverCollection	Represents a collection of Driver objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
JointFriction	Represents a joint friction object Created in NX5.0.0
JointFrictionAdams	Represents a adams joint friction object Created in NX5.0.0
JointFrictionRecurDyn	Represents a recurdyn joint friction object Created in NX5.0.0
Link	Represents the Motion Link class
LinkBuilder	Represents a Motion::LinkBuilder To create a new instance of this class, use Motion::LinkCollection::CreateLinkBuilder Created in NX5.0.0
LinkCollection	Represents a collection of motion joints To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
LinkInitialVelocity	Represents a Motion::LinkInitialVelocity
LinkMassProperty	Represents a Motion::LinkMassProperty
LoadTransfer	Represents a Motion Load Transfer class To create or edit an instance of this class, use Motion::LoadTransferBuilder Created in NX9.0.0
LoadTransferBuilder	Represents a @link Motion::LoadTransferBuilder Motion::LoadTransferBuilder@endlink <br> To create a new instance of this class, use @link Motion::LoadTransferCollection::CreateLoadTransferBuilder Motion::LoadTransferCollection::CreateLoadTransferBuilder @endlink <br> Default values
LoadTransferCollection	Represents a collection of load transfer objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
LoadTransferControl	Represents the Motion::LoadTransferControl No support for KF Created in NX9.0.0
Marker	Represents the Motion Marker class
MarkerBuilder	Represents a builder of Marker <br> To create a new instance of this class, use @link Motion::MarkerCollection::CreateMarkerBuilder Motion::MarkerCollection::CreateMarkerBuilder @endlink <br> Default values
MarkerCollection	Represents a collection of Markers To obtain an instance of this class, refer to Part Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
MarkerToNodeData	Represents the marker to node data which is a list item in Motion::FlexBodyBuilder
MotionBuilder	This builder class is used to create or edit Motion::MotionObject This is an abstract class, and cannot be created
MotionEnvironment	Represents a Motion Environment To obtain an instance of this class, refer to Motion::MotionSession Created in NX7.5.0
MotionManager	A manager to deal with all motion objects To obtain an instance of this class, refer to Part Created in NX5.0.0
MotionMethods	Represents a Motion::MotionMethods class To obtain an instance of this class, refer to Motion::MotionSession Created in NX8.0.0
MotionObject	Represents the motion base object class
MotionSensor	Represents a motion sensor To create or edit an instance of this class, use Motion::MotionSensorBuilder Created in NX6.0.0
MotionSensorBuilder	Represents a @link Motion::MotionSensorBuilder Motion::MotionSensorBuilder@endlink <br> To create a new instance of this class, use @link Motion::MotionSensorCollection::CreateMotionSensorBuilder Motion::MotionSensorCollection::CreateMotionSensorBuilder @endlink <br> Default values
MotionSensorCollection	Represents a collection of sensor objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MotionSession	Represents motion session To obtain an instance of this class, refer to Session Created in NX5.0.0
MotionSimulation	Represents Motion.Simulation To obtain an instance of this class, refer to Session Created in NX5.0.0
MotionSolution	Represents a solution To create or edit an instance of this class, use Motion::MotionSolutionBuilder Created in NX5.0.0
MotionSolutionBuilder	Represents a Motion::MotionSolutionBuilder To create a new instance of this class, use Motion::MotionSolutionCollection::CreateSolutionBuilder Created in NX5.0.0
MotionSolutionCollection	Represents a collection of Driver objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
Motor	Represents a motion motor base object class This is an abstract class, and cannot be created
MotorBuilder	This builder class is used to create or edit Motion::Motor This is an abstract class, and cannot be created
NormalModeProperty	Represents the properties of one normal mode Created in NX7.5.0
Packaging	This class is an abstract class and base class for PackagingMeasure , PackagingTrace and PackagingInterference objects
PackagingBuilder	This class an abstract class and base class for PackagingMeasureBuilder , PackagingTraceBuilder and PackagingInterferenceBuilder
PackagingCollection	Represents a collection of Packaging objects To obtain an instance of this class, refer to Part Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
PackagingInterference	This class represents a Packaging Interference object
PackagingInterferenceBuilder	This the builder class to create or edit an Interference object
PackagingMeasure	This class represents a Packaging Measure object
PackagingMeasureBuilder	This is the builder class to create or edit a Measure object
GeometryData	Represents geometry data
PackagingTrace	This class represents a Packaging Trace object
PackagingTraceBuilder	This is the builder class to create or edit a Trace object
PhysicsConversionBuilder	Represents a Motion::PhysicsConversionBuilder builder To create a new instance of this class, use Motion::MotionSession::CreatePhysicsConversionBuilder Created in NX8.0.0
PlantInput	Represents a Plant Input motion object To create or edit an instance of this class, use Motion::PlantInputBuilder Created in NX6.0.0
PlantInputBuilder	Represents a Motion::PlantInput builder To create a new instance of this class, use Motion::PlantInputCollection::CreatePlantInputBuilder Created in NX6.0.0
PlantInputCollection	Represents a collection of Plant Input objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PlantOutput	Represents a Plant Output motion object To create or edit an instance of this class, use Motion::PlantOutputBuilder Created in NX6.0.0
PlantOutputBuilder	Represents a Motion::PlantOutput builder To create a new instance of this class, use Motion::PlantOutputCollection::CreatePlantOutputBuilder Created in NX6.0.0
PlantOutputCollection	Represents a collection of Plant Output objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PMDCMotor	Represents a motion pmdc motor object To create or edit an instance of this class, use Motion::PMDCMotorBuilder Created in NX6.0.0
PMDCMotorBuilder	Represents a Motion::PMDCMotorBuilder To create a new instance of this class, use Motion::PMDCMotorCollection::CreatePmdcMotorBuilder Created in NX6.0.0
PMDCMotorCollection	Represents a collection of motion pmdc motor To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PointOnCurve	Represents a point on curve To create or edit an instance of this class, use Motion::PointOnCurveBuilder Created in NX6.0.0
PointOnCurveBuilder	Represents a @link Motion::PointOnCurveBuilder Motion::PointOnCurveBuilder@endlink <br> To create a new instance of this class, use @link Motion::PointOnCurveCollection::CreatePointOnCurveBuilder Motion::PointOnCurveCollection::CreatePointOnCurveBuilder @endlink <br> Default values
PointOnCurveCollection	Represents a collection of point on curve objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PointOnSurface	Represents a point on surface motion object To create or edit an instance of this class, use Motion::PointOnSurfaceBuilder Created in NX6.0.0
PointOnSurfaceBuilder	Represents a Motion::PointOnSurfaceBuilder To create a new instance of this class, use Motion::PointOnSurfaceCollection::CreatePointOnSurfaceBuilder Created in NX6.0.0
PointOnSurfaceCollection	Represents a collection of Point on Surface objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PostProcess	Represents the motion post process To obtain an instance of this class, refer to Motion::MotionSession Created in NX7.5.0
RecurdynSolverProperty	Represents a Motion::RecurdynSolverProperty Created in NX5.0.0
ScalarForce	Represents the Motion ScalarForce class
ScalarForceBuilder	Represents a Motion::ScalarForceBuilder To create a new instance of this class, use Motion::ScalarForceCollection::CreateScalarForceBuilder Created in NX6.0.0
ScalarForceCollection	Represents a Scalar Force Collection
iterator	Iterator for accessing the contents of the collection
ScalarTorque	Represents the Motion ScalarTorque class
ScalarTorqueBuilder	Represents a Motion::ScalarTorqueBuilder To create a new instance of this class, use Motion::ScalarTorqueCollection::CreateScalarTorqueBuilder Created in NX6.0.0
ScalarTorqueCollection	Represents a collection of motion scalar torque To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
SelectJoint	Represents a single object selection
SelectLink	Represents a single object selection
SelectMarker	Represents a single object selection
SignalChart	Represents a motion Signal Chart object To create or edit an instance of this class, use Motion::SignalChartBuilder Created in NX6.0.0
SignalChartBuilder	Represents a Motion::SignalChartBuilder To create a new instance of this class, use Motion::SignalChartCollection::CreateSignalChartBuilder Created in NX6.0.0
SignalChartCollection	Represents a collection of motion Signal Chart To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
SignalChartListItem	Represents a SignalChartListItem, List Item inside a SignalChartBuilder To create a new instance of this class, use Motion::SignalChartCollection::CreateSignalChartListItem Created in NX6.0.0
SignalChartListItemList	Represents a list of objects
SpreadsheetRunControl	Represents the Motion::SpreadsheetRunControl An instance of this class can not be obtained Created in NX9.0.0
Spring	Represents a spring To create or edit an instance of this class, use Motion::SpringBuilder Created in NX6.0.0
SpringBuilder	Represents a SpringBuilder <br> To create a new instance of this class, use @link Motion::SpringCollection::CreateSpringBuilder Motion::SpringCollection::CreateSpringBuilder @endlink <br> Default values
SpringCollection	Represents a collection of motion spring To obtain an instance of this class, refer to Motion::MotionManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
VectorForce	Represents a vector force To create or edit an instance of this class, use Motion::VectorForceBuilder Created in NX5.0.0
VectorForceBuilder	Represents a Motion::VectorForceBuilder To create a new instance of this class, use Motion::VectorForceCollection::CreateVectorForceBuilder Created in NX5.0.0
VectorForceCollection	Represents a collection of vector force objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
VectorTorque	Represents a vector torque To create or edit an instance of this class, use Motion::VectorTorqueBuilder Created in NX5.0.0
VectorTorqueBuilder	Represents a Motion::VectorTorqueBuilder To create a new instance of this class, use Motion::VectorTorqueCollection::CreateVectorTorqueBuilder Created in NX5.0.0
VectorTorqueCollection	Represents a collection of vector torque objects To obtain an instance of this class, refer to Motion::MotionManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
VObject	Represents a VObject
Newapp
ApplicationManager	Represents the Application Manager class
Optimization	Provides classes and interfaces for Optimization
DesignStudyAttributeBuilder	Represents a Optimization::DesignStudyAttributeBuilder To create a new instance of this class, use Optimization::DesignStudyCollection::CreateDesignStudyAttributeBuilder Created in NX6.0.0
DesignStudyBuilder	Represents a Optimization::DesignStudyBuilder To create a new instance of this class, use Optimization::DesignStudyCollection::CreateDesignStudyBuilder Created in NX6.0.0
DesignStudyObjective	Defined Objective Structure
DesignStudyVariable	Defined variable structure
DesignStudyCollection	Represents a Optimization::DesignStudyCollection To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MapleExpBuilder	Represents a Optimization::MapleExpBuilder To create a new instance of this class, use Optimization::OptimizationCollection::CreateMapleExpBuilder Created in NX7.5.0
OptimizationAttributeBuilder	Represents a Optimization::OptimizationAttributeBuilder To create a new instance of this class, use Optimization::OptimizationCollection::CreateOptimizationAttributeBuilder Created in NX6.0.0
OptimizationBuilder	Represents a Optimization::OptimizationBuilder To create a new instance of this class, use Optimization::OptimizationCollection::CreateOptimizationBuilder Created in NX6.0.0
OptimizationConstraint	Defined constraint structure
OptimizationObjective	Defined Objective Structure
OptimizationVariable	Defined variable structure
OptimizationCollection	Represents a Optimization::OptimizationCollection To obtain an instance of this class, refer to BasePart Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
Options	Provides classes and interfaces for options
ChangeList	Records changes to option values at the specified level
DraftingStandardChangeList	Records changes to option values at the specified level
OptionsManager	Manages options
PartFamily	Provides classes and interfaces for Part Family
FamilyAttribute	This class represents a part family attribute Use PartFamily::TemplateManager::GetPartFamilyAttribute to get an instance of this class
Instance	Represents an instance of a part family member Use Part::GetFamilyInstance to get the instance of this class
InstanceDefinition	This class repesents a part family table record (or instance definition on the template) and is created/deleted by PartFamily.TemplateManager in JA world
InstanceSelectionCriteria	Represents the selection criteria of a part family instance Use Assemblies::Component::CreateEmptyPartFamilyInstanceSelectionCriteria to get an instance of this class
Template	This class represents a part family template Use PartFamily::TemplateManager::CreatePartFamily to get the instance of this class
TemplateManager	This class serves as the manager for all the part family related operations
PDM	Provides classes and interfaces for PDM
AlternateIdManager	This class is responsible for setting and getting NX Manager database attribute
AlternateIdsData	Contains alternate Ids data
AssignAlternateRevData	Contains alternate Revision Id data
AttributeGroup	Represents an attribute group
AttributeGroupCollection	Represents a collection of attribute group objects
iterator	Iterator for accessing the contents of the collection
AttributeGroupDescription	Represents an attribute group type
AttributeGroupDescriptionCollection	Represents a collection of attribute group description objects
iterator	Iterator for accessing the contents of the collection
AttributeGroupReviseBuilder	Represents an attribute group revise builder
CaeCloneManager	This class is used for executing CAE Clone on a Simulation File or a FeModel File
CAEFileContainer	This class is a File Container class for uploading JT files created by NX CAE Post Processing to Teamcenter
ConfigurationContextBuilder	Represents a PDM::ConfigurationContextBuilder builder To create a new instance of this class, use PDM::ConfigurationManager::CreateConfigurationContextBuilder Created in NX9.0.0
ConfigurationManager	Represents Configuration Manager Use Session::ConfigurationManager to get the instance of this class
DatabaseAttributeManager	This class is responsible for setting and getting NX Manager database attribute
DesignElementRevision	Represents the design element revision in the database
DesignFeatureRevision	Represents the design feature revision in the database
DesignSubordinateRevision	Represents the design subordinate revision in the database
EffectivityAttributePropertiesBuilder	Represents an PDM::EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes
EffectivityTableBuilder	Represents a builder class for effectivity configuration
EffectivityTableRow	Represents the class that contains effectivity parameters
FileManagement	This class is responsible for Teamcenter file management related activities
IAttributeGroupOwner	An interface class for objects that own attribute groups
ListOfValues	Represents list of values to be used in search query Created in NX6.0.0
LogicalObject	Represents the class that contains database business logic or pre-creation information for the objects
ModelElementRevision	Represents a base class that provides common methods for various model elements in a CollaborativeDesign
OperationErrors	Represents Operation Errors to be returned in TCIN related operations Created in NX8.5.0
PartBuilder	This class serves as the base class for NX Manager part builders
PartFileNameData	Contains part file name information
PartNumberData	Contains part number information
PartRevisionData	Contains part revision information
PartCreationObject	This class is a proxy for a to-be-created part prior to the part being created
PartCreationObjectAttributePropertiesBuilder	Represents an PDM::PartCreationObjectAttributePropertiesBuilder
PartFromPartBuilder	This class provides the methods necessary to create a new part in NX Manager from an existing part
PartFromTemplateBuilder	This class provides the methods necessary to create a new part in NX Manager from a template part
PartManager	This class contains methods to create and manage parts in NX Manager mode
PartOperationBuilder	Represents a builder class that performs various design element operations
PdmNavigatorNode	Represents a PdmNavigatorNode Created in NX6.0.4
PdmPart	This class serves as a gateway to part-specific tools for NX Manager mode
CheckinInput	Reservation check-in input struct
CheckoutInput	Reservation check-out input struct
PdmSearch	Represents search query Created in NX6.0.0
PdmSearchManager	Represents search manager class Use Session::PdmSearchManager to get the instance of this class
PdmSession	Represents the NX Manager session To obtain an instance of this class, refer to Session Created in NX7.5.0
PendingComponentsManager	This class is used for managing a part's pending components, that is, those that have been added within Teamcenter but are not yet present in NX
PersistentSettings	Persistently held settings for a Teamcenter user account
RequirementUtils	Collection of PDM utility methods To obtain an instance of this class, refer to Session Created in NX6.0.3
SearchResult	Represents search query Created in NX6.0.0
SessionSettings	Values for the settings that affect the current Teamcenter session
SoaQuery	Represents search soa query to perform Teamcenter search Created in NX6.0.0
TracelinkQuery	Represents the Trace link query To obtain an instance of this class use PDM::RequirementUtils Created in NX6.0.3
VariantConfigurationBuilder	Represents a builder class that performs variant rule configuration
PhysMat	Provides classes and interfaces for Physical Material
PhysicalMaterialAssignBuilder	Represents a Physical Material Assign Builder To create a new instance of this class, use PhysicalMaterialCollection::CreateMaterialAssignBuilder Created in NX6.0.0
PhysicalMaterialLibMgrBuilder	Represents a PhysMat::PhysicalMaterialLibMgrBuilder builder To create a new instance of this class, use PhysicalMaterialCollection::CreateMaterialLibmgrBuilder Created in NX6.0.0
PhysicalMaterialListBuilder	This builder is used by the Materials list component that allows copying, editing, deleting
Positioning	Provides classes and interfaces for Assembly Positioning and Constraints
ComponentConstraint	Constraint for use in positioning assembly objects in NX
ComponentConstraintGroup	Constraint group which represents a group of component constraints in NX
ComponentConstraintGroupBuilder	Represents a @link Positioning::ComponentConstraintGroupBuilder Positioning::ComponentConstraintGroupBuilder@endlink builder <br> To create a new instance of this class, use @link Assemblies::ComponentAssembly::CreateConstraintGroupBuilder Assemblies::ComponentAssembly::CreateConstraintGroupBuilder @endlink <br> Default values
ComponentNetwork	Network for use in positioning components in NX
ComponentPositioner	An instance of this class can be used to create Constraint s and associated objects
Constraint	Constraint for use in positioning objects in NX
ConstraintCollection	a collection of constraints <br> To obtain an instance of this class, refer to @link Positioning::Positioner Positioning::Positioner @endlink <br> Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
ConstraintReference	ConstraintReference for use in positioning objects in NX
DisplayedConstraint	The displayed representation of a constraint, used for graphical display and to represent it in the Assembly Navigator
DisplayedConstraintCollection	a collection of displayed constraints <br> To obtain an instance of this class, refer to @link Part Part @endlink <br> Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
MatingConverter	An instance of this class can be used to convert Mating Conditions to Assembly Constraints in its owning assembly or in child parts of its owning assembly
Network	Network for use in positioning objects in NX
Positioner	An instance of this class can be used to create Constraint s and associated objects
Preferences	Provides classes and interfaces for preferences
AnnotationPreferences	Represents the global preferences for annotations To obtain an instance of this class, refer to Annotations::AnnotationManager Created in NX3.0.0
BaseViewPreferences	Represents set of Base View Preferences applicable to drafting views
DetailViewPreferences	Represents set of Detail View Preferences applicable to drafting views
DraftingPreferenceManager	Represents a collection of pmi preference builders
FlatPatternViewPreferences	Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings
GeneralViewPreferences	Represents set of General View Preferencess applicable to drafting views
HiddenLinesViewPreferences	Represents set of Hidden Lines View Preferences applicable to drafting views
IBaseViewPreferences	Represents set of IBaseViewPreferences applicable to drafting views
IDetailViewPreferences	Represents set of Detail ViewPreferences applicable to drafting views
IGeneralViewPreferences	Represents set of General View Styles applicable to drafting views
IHiddenLinesViewPreferences	Represents set of HiddenLinesViewStyle applicable to drafting views
InheritPmiPreferences	Represents set of InheritPmiPreferences applicable to drafting views
IOrientationViewPreferences	Represents set of IOrientationViewPreferences applicable to drafting views
IPerspectiveViewPreferences	Represents set of PerspectiveViewPreferences applicable to drafting views
IProjectedViewPreferences	Represents set of ProjectedViewPreferences applicable to drafting views
ISectionViewPreferences	Represents set of SectionViewPreferences applicable to drafting views
IShadingViewPreferences	Represents set of Shading ViewPreferences applicable to drafting views
ISmoothEdgesViewPreferences	Represents set of SmoothEdgesViewPreferences applicable to drafting views
IThreadsViewPreferences	Represents set of ThreadsViewPreferences applicable to drafting views
ITraceLinesViewPreferences	Represents interface for TraceLinesViewPreferences applicable to drafting views
IVirtualIntersectionsViewPreferences	Represents set of Virtual Intersections View Preferences applicable to drafting views
IVisibleLinesViewPreferences	Represents set of VisibleLinesViewPreferences applicable to drafting views
LoadDraftingStandardBuilder	Represents a Preferences::LoadDraftingStandardBuilder To create a new instance of this class, use Preferences::DraftingPreferenceManager::CreateLoadDraftingStandardBuilder Created in NX5.0.0
ObjectPreferences	Captures the UI based calls required for Object Preferences To obtain an instance of this class, refer to UI Created in NX3.0.0
PartAeroSheetmetal	Represents the NX Sheetmetal preferences applicable to part Preferences are in control of the part
PartDrafting	Represents the set of drafting preferences applicable to part To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartFlexiblePrintedCircuitDesign	Represents the Flexible Printed Circuit Design preferences applicable to part Preferences are in control of the part
FlatPatternCalloutTypeDisplay	The members of the following structure are the display data for a callout in a flat pattern drawing member view
FlatPatternObjectTypeDisplay	The members of the following structure are the display data for an object in a flat pattern drawing member view
PartModeling	Represents the set of Modeling preferences applicable to part To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartObject	Represents the set of object preferences applicable to entire part
PartPreferences	Represents set of preferences applicable to displayed part
PartSheetmetal	Represents the NX Sheetmetal preferences applicable to part Preferences are in control of the part
FlatPatternCalloutTypeDisplay	The members of the following structure are the display data for a callout in a flat pattern drawing member view
FlatPatternObjectTypeDisplay	The members of the following structure are the display data for an object in a flat pattern drawing member view
PartSketch	Represents the set of Sketcher preferences applicable to entire part
PartUserInterface	Represents the set of User Interface preferences applicable to entire part
PartVisualizationColorSetting	Represents the set of visualization preferences under color setting tab applicable to part To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartVisualizationEmphasis	Represents visualization preferences for emphasis that are applicable to the entire part
LayersOptions	Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Layers
OriginalColorShellOptions	Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell
ShellOptions	Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Shell
WireframeBlendOptions	Specifies options that control the color-blending effect used to de-emphasize wireframe geometry
PartVisualizationLine	Represents the set of visualization preferences under Line tab applicable to part To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartVisualizationNamesBorders	Represents the set of visualization preferences of entire Working Part coming under Names/borders Tab To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartVisualizationShade	Represents the set of shade visualization preferences applicable to entire part To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PartVisualizationVisual	Represents the set of visualization preferences applicable to entire session To obtain an instance of this class, refer to Preferences::PartPreferences Created in NX3.0.0
PostProcessing	CAE Post Processing preferences To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX8.0.1
ProjectedViewPreferences	Represents set of Projected View Preferences applicable to drafting views
RoutingApplicationView	All of the various preferences and options available from the Routing Application View file
RoutingCharacteristics	Contains all of the various preferences for option and required characteristics
RoutingElectrical	The RoutingElectrical object stores a set of route electrical preferences
RoutingLogical	The RoutingLogical object stores a set of route logical preferences
RoutingMechanical	The RoutingMechanical object stores a set of route mechanical preferences
RoutingPart	Contains the preferences related to placing/finding/adding parts and generating the Routing bill of materials
RoutingPartLibrary	Represents a Routing Part library
Column	Part table column type
RoutingPath	The RoutingPath object stores a set of path preferences
RoutingStock	The Preferences for Routing Stock objects
RulePreferences	Provides methods for manipulating the Knowledge Fusion preferences in a session
SectionViewPreferences	Represents set of Section View Preferences applicable to drafting views
SessionAssemblies	Represents the set of Assemblies Preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionDrafting	Represents the set of Drafting preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionMeasureRequirements	Represents the two options available on the Measure Requirements toolbar and applicable to the entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX5.0.0
SessionModeling	Represents the set of Modeling preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionNXGateway	Represents the set of NXGateway Preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionPdm	Represents the NX Manager preferences for the entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX4.0.1
SessionPmi	Represents the set of PMI preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX4.0.0
SessionPreferences	Represents a collection of session based preferences
SessionSketch	Represents the set of sketch preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionUserInterface	Represents the set of User Interface preferences applicable to entire session
SessionUserInterfaceUI	Represents all UI based session user interface preferneces
SessionVisualizationColorSetting	Represents the set of visualization preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences
SessionVisualizationEmphasis	Represents visualization preferences for emphasis that are applicable to the entire session
SessionVisualizationHighQualityImage	Represents the High Quality Image preferences for the entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX4.0.0
SessionVisualizationScreen	Represents the set of visualization preferences under screen tab applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX3.0.0
SessionVisualizationShade	Represents the UI related Visualization Shade preferences
Rgb	Specifies a color by its red, green, and blue values, where each value is between 0 and 1
SeeThruOptions	Specifies the See-Thru color, edge, and translucency options used for the various See-Thru Styles
SessionVisualizationSpecialEffects	Represents the set of visualization special effect preferences applicable to entire session
SessionVisualizationVisual	Represents all UI based session Visualization visual preferences To obtain an instance of this class, refer to UI Created in NX3.0.0
SessionWorkPlane	Represents the set of WorkPlane preferences applicable to session To obtain an instance of this class, refer to Preferences::SessionPreferences
ShadingViewPreferences	Represents set of Shading View Preferences applicable to drafting views
ShipbuildingLinesViewPreferences	Represents set of Shipbuilding Lines View Preferences applicable to drafting views
SketchPreferences	Represents the set of sketch preferences applicable on Sketch object To obtain an instance of this class, refer to Sketch Created in NX3.0.0
SmoothEdgesViewPreferences	Represents set of Smooth Edges View Preferences applicable to drafting views
SubdivisionModelingPreferences	Represents the set of Modeling preferences applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX9.0.0
ThreadsViewPreferences	Represents set of Threads View Preferences applicable to drafting views
TraceLinesViewPreferences	Represents set of Trace Lines View Preferences applicable to drafting views
ViewPreferences	Represents set of style applicable to drafting views
ViewSection	Records / queries view section preferences
ViewVisualizationSpecialEffects	Represents the set of visualization special effect preferences applicable to entire session
ColorHLS	Represents three constituents of a HLS color pattern
ColorHSV	Represents three constituents of a HSV color pattern
ColorRGB	Represents three constituents of a RGB color pattern
FogData	Represents the constituents of fog data
ViewVisualizationVisual	Represents the set of View related Visualization visual preferences To obtain an instance of this class, refer to View Created in NX3.0.0
DisplayAppearanceOptions	Describes the rendering style and the appearance of edges and silhouettes in the view
SurfaceDisplayOptions	Describes the appearance of edges and silhouettes in the view
TrueSurfaceDisplayPref	Represents the various surface display parameters
VirtualIntersectionsViewPreferences	Represents set of Virtual Intersections View Preferences applicable to drafting views
VisibleLinesViewPreferences	Represents set of Visible Lines View Preferences applicable to drafting views
VisualizationFonts	Represents visualization preferences for standard text fonts applicable to the entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX8.0.0
VisualizationHandles	Represents the set of visualization preferences under handles tab applicable to entire session To obtain an instance of this class, refer to Preferences::SessionPreferences Created in NX7.5.0
VisualizationLine	This class is for UI related preferences changes To obtain an instance of this class, refer to UI Created in NX3.0.0
WorkPlane	Represents the set of WorkPlanePreferences preferences applicable to part
GridSize	Grid size parameters
NonuniformGridSize	Nonuniform grid size parameters
PolarGridSize	Polar grid size parameters
Routing	Provides classes and interfaces for Routing
Electrical	Provides classes and interfaces for Routing Electrical
AssignProxyBuilder	Represents a Routing::Electrical::AssignProxyBuilder
CableConnection	Connection used by a Routing::Electrical::CableDevice
CableConnectionCollection	Represents a collection of Routing::Electrical::CableConnection objects
iterator	Iterator for accessing the contents of the collection
CableDefinition	Holds the collection of wires in a Routing::Electrical::CableDevice
CableDevice	Corresponds to a cable instance of an Routing::Electrical::ElectricalStockDevice
CableStockDefinition	Describes a cable's stock
CablewaysBuilder	Represents Routing::Electrical::CablewaysBuilder
CablewaysLayoutBuilder	Represents Routing::Electrical::CablewaysLayoutBuilder
CablewaysLayoutView	Represents the CablewaysLayoutView class
CablewaysLayoutViewCollection	Represents a collection of Routing::Electrical::CablewaysLayoutView objects
iterator	Iterator for accessing the contents of the collection
Connection	The electrical usage of a Routing::LogicalConnection , restricted to one From and one To terminal
ConnectionCollection	Represents a collection of Routing::Electrical::Connection objects
iterator	Iterator for accessing the contents of the collection
ConnectorDevice	The Electrical ConnectorDevice corresponds to a connector instance of Routing::SingleDevice
ConnectorDeviceCollection	Represents a collection of Routing::Electrical::ConnectorDevice (CD) objects
iterator	Iterator for accessing the contents of the collection
ElectricalDeviceRelationship	Represents a relationship between Routing Electrical devices
ElectricalDeviceRelationshipCollection	Represents a collection of Routing::Electrical::ElectricalDeviceRelationship objects
iterator	Iterator for accessing the contents of the collection
ElectricalFormat	Represents a Routing Electrical ElectricalFormat
ElectricalFormatCollection	Represents a Routing ElectricalFormatCollection object
iterator	Iterator for accessing the contents of the collection
ElectricalNavigatorFilter	Represents a Routing Electrical Navigator Filter object
ElectricalNavigatorFilterCollection	Represents a Routing ElectricalNavigatorFilterCollection object
iterator	Iterator for accessing the contents of the collection
ElectricalPartDefinitionShadow	Represents Routing::Electrical::ElectricalPartDefinitionShadow object Creator not available in KF
ElectricalStockDefinition	Represents Routing::Electrical::ElectricalStockDefinition object Creator not available in KF
ElectricalStockDevice	The Electrical Stock Device is a non instantiable superclass to classify all electrical stock-based single devices
ElectricalStockDeviceCollection	Represents a collection of Routing::Electrical::ElectricalStockDevice (ESD) objects
iterator	Iterator for accessing the contents of the collection
HarnessDefinition	Represents a Routing::Electrical::HarnessDefinition Creator not available in KF
HarnessDevice	The Electrical HarnessDevice corresponds to a harness instance of the Routing::SingleDevice
HarnessDeviceCollection	Represents a collection of Routing::Electrical::HarnessDevice objects
iterator	Iterator for accessing the contents of the collection
JumperConnection	A jumper connection connects ports on the same connector
JumperConnectionCollection	A collection of Routing::Electrical::JumperConnection objects
iterator	Iterator for accessing the contents of the collection
NonPathConnection	Describes a connection that does not have a path
NonPathConnectionCollection	A collection of Routing::Electrical::NonPathConnection objects
iterator	Iterator for accessing the contents of the collection
PathConnection	Describes a connection that has a path
PathConnectionCollection	A collection of Routing::Electrical::PathConnection objects
iterator	Iterator for accessing the contents of the collection
ShieldDefinition	Represents Routing Electrical ShieldDefinition object Creator not available in KF
ShieldDevice	The Electrical ShieldDevice corresponds to a shield instance of Routing::Electrical::ElectricalStockDevice
ShieldStockDefinition	Represents Routing Electrical ShieldStockDefinition object Creator not available in KF
SystemDefinition	Represents a Routing::Electrical::SystemDefinition Creator not available in KF
SystemDevice	The Electrical SystemDevice corresponds to a system instance of the Routing::SingleDevice
SystemDeviceCollection	Represents a collection of Routing::Electrical::SystemDevice objects
iterator	Iterator for accessing the contents of the collection
WireDevice	The Electrical WireDevice corresponds to a wire instance of Routing::Electrical::ElectricalStockDevice
AddFontBuilder	Builder for creating an add font user interface dialogue To obtain an instance of this class use Routing::AddFontBuilder Created in NX8.5.0
Anchor	A Routing Anchor defines a position in a Qualified Routing component part
AnchorCollection	Represents a collection of Anchor objects
iterator	Iterator for accessing the contents of the collection
ArcSegment	Represents a arc segment
ArcSegmentCollection	Represents a collection of Routing::ArcSegment objects
iterator	Iterator for accessing the contents of the collection
AssemblyDefinition	Represents a collection of Routing::SingleDevice objects that are used in an assembled product
AssignCornerBuilder	Builder class for Assign Corner which creates corner <br> To create a new instance of this class, use @link Routing::RouteManager::CreateAssignCornerBuilder Routing::RouteManager::CreateAssignCornerBuilder @endlink <br> Default values
AssignDiscontinuityBuilder	Builder to Assign Discontinuity for the stocks To create a new instance of this class, use Routing::RouteManager::CreateAssignDiscontinuityBuilder Created in NX7.5.0
AssignPathBuilder	Assigns path to a broken routing run To create a new instance of this class, use Routing::RouteManager::CreateAssignPathBuilder Created in NX8.5.0
AttributeHolder	Represents a Routing::AttributeHolder Use Routing::RouteManager::CreateAttributeHolder to get the instance of this class
AttributeMembersBuilder	Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder To create a new instance of this class, use Routing::FindByAttributesBuilder::AttributeMembersBuilder Created in NX8.5.0
BendCorner	Computes a fillet curve between two linear segments to form a smooth bend transition from one segment to another
BendCornerCollection	Represents a collection of Routing::BendCorner objects
iterator	Iterator for accessing the contents of the collection
BranchPathNumberingBuilder	Builder class for Branch Path Numbering
BuiltInPath	The Routing BuiltInPath object stores a set of curves
BuiltInPathCollection	Represents a collection of BuiltInPath objects
iterator	Iterator for accessing the contents of the collection
CharacteristicList	Contains a list of characteristics
CharacteristicInformation	Contains the type and name of a characteristic
ClockPartBuilder	Builder class for clock part object <br> To create a new instance of this class, use @link Routing::RouteManager::CreateClockPartBuilder Routing::RouteManager::CreateClockPartBuilder @endlink <br> Default values
CompareRunsBuilder	Represents a CompareRunsBuilder , used to compare runs in the work part to the ones in another part, or to runs defined in xml files gathered in a folder (native mode) or on an item revision (managed mode)
ConnectedCurvesBuilder	Builder for creating automatically creating segments on end-to-end connected curves
ConnectivityDefinition	The base class for various connection objects.
ConnectPathBuilder	Represents a Routing::ConnectPathBuilder
ControlPoint	Routing Control Points define a position in space, and are used to determine connections from segments to segments, and segments to ports
ControlPointCollection	Represents a collection of Routing::ControlPoint objects
iterator	Iterator for accessing the contents of the collection
CopeCorner	The cope corner is a corner that trims stocks at a junction
CopeCornerBuilder	Builder class for Cope Corner object To create a new instance of this class, use Routing::RouteManager::CreateCopeCornerBuilder
CopeCornerCollection	Represents a collection of Routing::CopeCorner objects
iterator	Iterator for accessing the contents of the collection
Corner	The Routing Corner is the abstract parent class of all other corner objects
CornerCollection	Represents a collection of Routing::Corner objects
iterator	Iterator for accessing the contents of the collection
CornerTypeBuilder	Contains setting for corner creation
CreateFabricationBuilder	Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly To create a new instance of this class, use Routing::RouteManager::CreateFabricationBuilder Created in NX8.0.0
CrossSection	A Routing::CrossSection defines a profile to sweep for Routing::Stock objects
CrossSectionCollection	Represents a collection of Routing::CrossSection objects
iterator	Iterator for accessing the contents of the collection
DefineRunBuilder	Builder Class for DefineRun Object To create a new instance of this class, use Routing::RouteManager::CreateDefineRunBuilder Created in NX8.5.0
DeleteFontsBuilder	Represents a Routing::DeleteFontsBuilder To create a new instance of this class, use Routing::RouteManager::CreateDeleteFontsBuilder Created in NX8.5.0
DeleteGapsBuilder	Represents a Routing::DeleteGapsBuilder To create a new instance of this class, use Routing::RouteManager::CreateDeleteGapsBuilder Created in NX8.5.0
DeleteObjectsBuilder	Represents a Routing::DeleteObjectsBuilder To create a new instance of this class, use Routing::RouteManager::CreateDeleteObjectsBuilder Created in NX6.0.0
DesignRule	Represents Routing::DesignRule object Creator not available in KF
DesignRuleCollection	Represents a collection of DesignRule objects
iterator	Iterator for accessing the contents of the collection
DesignRuleManager	Represents Routing::DesignRuleManager object Creator not available in KF
DesignRuleOverride	Represents Routing DesignRuleOverride object Creator not available in KF
DesignRuleViolation	Represents Routing::DesignRuleViolation object Design Rule Violation object is created automatically during design rule check Created in NX4.0.2
DesignRuleViolationCollection	Represents a collection of DesignRuleViolation objects
iterator	Iterator for accessing the contents of the collection
DesignRuleViolationLocation	Represents Routing::DesignRuleViolationLocation object Design Rule Violation Location object get created automatically during design rule check Created in NX6.0.0
DesignRuleViolationLocationCollection	Represents a collection of DesignRuleViolationLocation objects
iterator	Iterator for accessing the contents of the collection
DesignRuleViolationViewer	This class can be used to set the violation id, update text for overridding the violation and update the user name used to override the violation
DeviceRelationship	Represents a relationship between Routing::SingleDevice objects
DiscontinuityCorner	A discontinuity corner is a corner that forces Routing::Stock objects to split as they cover the segments attached to the discontinuity corner
DiscontinuityCornerCollection	Represents a collection of Routing::DiscontinuityCorner objects
iterator	Iterator for accessing the contents of the collection
Division	Represents Routing::Division Creator not available in KF because transient objects are not supported
DivisionsBuilder	Represents a Routing::DivisionsBuilder
DuctReinforcement	Represents a Duct Reinforcement feature used for creating/editing reinforcements on the inside or outside of rectangular HVAC ducts
DuctReinforcementBuilder	Builder for creating/editing duct reinforcements
DuctSizeCalculatorBuilder	Builder to perform calculations of the duct which is to be used in the HVAC applications
EditBendAngleBuilder	<br> To create a new instance of this class, use @link Routing::RouteManager::CreateEditBendAngleBuilder Routing::RouteManager::CreateEditBendAngleBuilder @endlink <br> Created in NX7.5.0
EditCharacteristicsBuilder	Builder to edit required and optional characteristics of Routing::Stock or Assemblies::Component as defined in the application view file
EditLineSegmentBuilder	Builder for the "Edit Line Segment" operation
ElbowSnapSettings	Helper object used the by Routing::LinearPathBuilder builder
ExtractPort	Routing ExtractPort object is an extract of Port class To create an instance of this class use Routing::PortCollection::CreateExtractPort Created in NX4.0.0
FeaturePort	Routing::FeaturePort is a Features::Feature associated with Routing::Port
Filler	Represents a Filler Created in NX4.0.0
FillerCollection	Represents a collection of Routing::Stock objects
iterator	Iterator for accessing the contents of the collection
FillerStockBuilder	Creates Filler stock on selected Segments
FindByAttributesBuilder	Find runs/objects with specified attribute name and attribute value criteria, highlight the corresponding nodes in the run navigator and the graphics area To create a new instance of this class, use Routing::RouteManager::CreateFindByAttributesBuilder Created in NX8.5.0
FittingOverstock	The Routing::FittingOverstock object represents overstock applied over the faces of the routing parts
FittingOverstockBuilder	Builder for creating or editing Routing::FittingOverstock objects
FittingOverstockCollection	Represents a collection of Routing::FittingOverstock objects
iterator	Iterator for accessing the contents of the collection
FittingPort	Represents a Routing Fitting Port ObjectFittingPort
FittingPortCollection	Represents a collection of FittingPort objects
iterator	Iterator for accessing the contents of the collection
FixturePort	Routing::FixturePort objects are objects that segments are routed through when creating a routing path
FixturePortCollection	Represents a collection of FixturePort objects
iterator	Iterator for accessing the contents of the collection
FormboardFrame	The Routing::FormboardFrame is a (not pure) virtual class
FormboardFrameCGM	Represents a Formboard Frame CGM
FormboardFrameCollection	Represents a collection of FormboardFrame objects
iterator	Iterator for accessing the contents of the collection
FormboardFramePattern	Represents a Formboard Frame Pattern
FormboardFrameRectangle	Represents a Formboard Frame Rectangle
GapArcSegment	Represents a gap arc segment
GapDisplayBuilder	Builder for creating a gap arc object on a line segment
HandrailBuilder	Represents a Routing::HandrailBuilder Creates a handrail from a selected point
HealPath	Represents a Routing::HealPath object which holds the data used in the creation of the heal path spline
IAxisPort	Interface class for all routing objects that specify a direction Created in NX4.0.0
ICharacteristic	Interface for querying and setting characteristic (UG attribute values) on various routing objects
InfoObjectsBuilder	Represents a Routing::InfoObjectsBuilder To create a new instance of this class, use Routing::RouteManager::CreateInfoObjectsBuilder Created in NX6.0.0
InstanceNameLookupBuilder	Represents a Routing::InstanceNameLookupBuilder
IntegrateRunsBuilder	Builder Class for Integrate Runs Object <br> To create a new instance of this class, use @link Routing::RouteManager::IntegrateRunsBuilder Routing::RouteManager::IntegrateRunsBuilder @endlink <br> Default values
InterfaceTerminalBase	The Routing::InterfaceTerminalBase corresponds to an abstract class for a prototype Routing::Port
InterfaceTerminalRelationshipBase	The abstract class Routing::InterfaceTerminalRelationshipBase relates many Routing::Port s to one Routing::Port
InterfaceTerminalRelationshipCollection	Represents a collection of InterfaceTerminalRelationshipShadow objects
iterator	Iterator for accessing the contents of the collection
InterfaceTerminalRelationshipShadow	Represents an assembly shadow of Routing::InterfaceTerminalRelationshipBase
InterfaceTerminalShadow	Represents the defining data for a physical Routing::Port
IPath	The Routing IPath object is a list of segments in a route
IRoutePosition	Interface class for all routing objects that specify a single (possibly associative) location in space
ISegment	Interface class for all routing segments [Line/Arc/Spline] Created in NX4.0.0
ISegmentCollection	Represents a collection of Routing::ISegment objects
iterator	Iterator for accessing the contents of the collection
IsoDrawingBuilder	Represents a IsoDrawingBuilder , used to run the ISOGEN engine to create isometric drawings of piping networks
ItemDefinition	Routing::ItemDefinition object corresponds to DDID in AP212 and to a piece part or routing stock in NX
LinearPathBuilder	Builder for creating routing linear paths
LinearPathSettings	Helper object used the by Routing::LinearPathBuilder builder
LineSegment	Represents a line segment
LineSegmentCollection	Represents a collection of Routing::LineSegment objects
iterator	Iterator for accessing the contents of the collection
LogicalConnection	Represents a connection between mutiple From and To Routing::LogicalTerminal
LogicalTerminal	Assembly instance of a Routing::InterfaceTerminalBase
ManualRouteBuilder	<br> To create a new instance of this class, use @link Routing::RouteManager::CreateManualRouteBuilder Routing::RouteManager::CreateManualRouteBuilder @endlink <br> Created in NX7.5.0
MiterCorner	This class defines a mitered corner
MiterCornerCollection	Represents a collection of Routing::MiterCorner objects
iterator	Iterator for accessing the contents of the collection
ModelTerminalsBuilder	The Builder to Model/UnModel the Terminals <br> To create a new instance of this class, use @link Routing::RouteManager::ModelTerminalsBuilder Routing::RouteManager::ModelTerminalsBuilder @endlink <br> Default values
MultiPort	Represents a Routing::MultiPort
MultiPortCollection	Represents a collection of MultiPort objects
iterator	Iterator for accessing the contents of the collection
ObjectRelationship	Represents a relationship between Routing objects
OffsetPath	The Routing OffsetPath object is the set of information needed to define an offset route
OffsetPathCollection	The Routing OffsetPath object is a list of segments in a route
iterator	Iterator for accessing the contents of the collection
Overstock	Represents an Routing::Overstock object
OverstockApplication	Represents a collection of Routing::OverstockApplication objects
OverstockApplicationCollection	Represents a collection of Routing::OverstockApplication objects
iterator	Iterator for accessing the contents of the collection
OverstockBuilder	Builder for creating/editing overstocks
OverstockFacesBuilder	Builder for qualifying faces for overstock application over fittings
PartDefinitionBase	The abstract class Routing::PartDefinitionBase contains information defining a logical part
PartDefinitionShadow	Routing::PartDefinitionShadow contains the defining data for a logical part, such as an connector
Path	The Routing Path object is the set of ordered continuous segments
PathStockBuilder	Assigns stocks to segments based of users critiera and the current default stock
PlacementSolutionsBuilder	<br> To create a new instance of this class, use @link Routing::RouteManager::CreatePlacementSolutionsBuilder Routing::RouteManager::CreatePlacementSolutionsBuilder @endlink <br> Created in NX7.5.0
PlacePartBuilder	<br> To create a new instance of this class, use @link Routing::RouteManager::CreatePlacePartBuilderPTS Routing::RouteManager::CreatePlacePartBuilderPTS @endlink <br> Created in NX7.5.0
PlatformCreatorBuilder	Builder for creating platform
PlatformFeature	Represents a Platform feature
Port	Routing Port Object is a parent class for FixturePort, ExtractPort, FittingPort, Multiport, StockPort and TerminalPort Creator not available in KF
PortCollection	Represents a collection of Port objects
iterator	Iterator for accessing the contents of the collection
PortConnection	The Routing PortConnection object is used by Routing to position ports while placing parts
PortConnectionCollection	Represents a collection of PortConnection objects
iterator	Iterator for accessing the contents of the collection
ProxyPort	A Routing::ProxyPort is a port that represents a connector in another design zone, but not present in this design zone
ProxyPortCollection	Represents a collection of ProxyPort objects
iterator	Iterator for accessing the contents of the collection
QuickPathBuilder	Builder for creating a collision free path between points
RemoveDiscontinuityBuilder	Builder class for remove discontinuity object To create a new instance of this class, use Routing::RouteManager::CreateRemoveDiscontinuityBuilder Created in NX7.5.0
ReuseLibrary	Represents a Routing::ReuseLibrary No creator is available in KF
RootObject	The Routing::RootObject is the parent class of all other Routing logical objects
RouteLogicalAssociation	RouteLogicalAssociation object associates non-electrical components to electrical components
RouteLogicalAssociationCollection	Collection class for RouteLogicalAssociation object To obtain an instance of this class, refer to Routing::RouteManager Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
RouteManager	Manages various Routing collections and methods for use in the current work part
RouteObject	The Top level routing data model object
RouteObjectCollector	Represents a Routing::RouteObjectCollector class to create objects for getting routing objects
RoutePartDescriptor	Represents a part descriptor chrx
RoutePartDescriptorCollection	Represents a collection of RoutePartDescriptor objects
iterator	Iterator for accessing the contents of the collection
RouteSegmentFont	Represents a route segment font
RouteSegmentFontElement	Represents a route segment font element
RouteSweptFoldBuilder	Represents a Rout Swept Fold Builder To create a new instance of this class, use Routing::RouteManager::CreateRouteSweptFoldBuilder Created in NX7.0.0
RouteSweptTwistBuilder	<br> To create a new instance of this class, use @link Routing::RouteManager::CreateRouteSweptTwistBuilder Routing::RouteManager::CreateRouteSweptTwistBuilder @endlink <br> Created in NX6.0.0
RoutingMeasureDistanceBuilder	Represents a RoutingMeasureDistanceBuilder Creator not available in KF because transient objects are not supported
RoutingSystem	Routing object is a collection of Run objects
RoutingSystemCollection	Represents a collection of Routing::RoutingSystem objects
iterator	Iterator for accessing the contents of the collection
Run	Routing Run object references components and stocks which comprise a piping run
RunCollection	Represents a collection of Routing::Run objects
iterator	Iterator for accessing the contents of the collection
RunItem	Routing Run Item object references components which comprise a piping run
RunItemsBuilder	The builder for creating the list item of RunItems To create a new instance of this class, use Routing::DefineRunBuilder::CreateRunItemsBuilder Created in NX8.5.0
RunItemsBuilderList	Represents a list of objects
SBendCorner	The Routing SBendCorner defines a S-Bend
SBendCornerCollection	Represents a collection of SBendCorner objects
iterator	Iterator for accessing the contents of the collection
SegmentManager	Contains the type of the routing part as well as the Collection objects for creating/iterating over routing objects
SubdivideOption	Contains subdivide segment method information
SegmentPairBuilder	The builder for creating the list item of SegmentPairs To create a new instance of this class, use Routing::AssignDiscontinuityBuilder::SegmentPairBuilder Created in NX7.5.0
SelectControlPoint	Represents a single object selection
SelectISegment	Represents a single object selection
SelectLineSegment	Represents a single object selection
SelectPort	Represents a single object selection
SelectRun	Represents a single object selection
SelectStock	Represents a single object selection
SimplifyPathBuilder	Represents a Routing::SimplifyPathBuilder for Simplify Path operation
SingleDevice	The Routing SingleDevice corresponds to an abstract instance of Routing::ItemDefinition
SpaceReservationBuilder	Represents a Routing::SpaceReservationBuilder
SplinePathBuilder	Builder for creating a D-Cubed constrained spline
SplineSegment	Represents a spline segment
SplineSegmentCollection	Represents a collection of Routing::SplineSegment objects
iterator	Iterator for accessing the contents of the collection
SplitDuctBuilder	Represents a Routing::SplitDuctBuilder
SplitRunBuilder	Builder Class for Split Run Object <br> To create a new instance of this class, use @link Routing::RouteManager::SplitRunBuilder Routing::RouteManager::SplitRunBuilder @endlink <br> Default values
Stock	The Routing::Stock object represents a material (such as as pipe or tube) that covers a path of segments
StockBrowserBuilder	Builder class for stock browser
StockBuilder	Builder for creating/editing stocks
StockCollection	Represents a collection of Routing::Stock objects
iterator	Iterator for accessing the contents of the collection
StockColorBuilder	Represents a Routing::StockColorBuilder
StockData	A Routing::StockData contains the various profiles, characteristic information, Routing::Anchor and other attributes that define Routing::Stock objects
StockDataCollection	Represents a collection of Routing::StockData objects
iterator	Iterator for accessing the contents of the collection
StockDefinition	Represents Routing StockDefinition object Creator not available in KF
StockDevice	The Routing StockDevice corresponds to a generic stock instance of Routing::SingleDevice
StockOffsetPointBuilder	Applies Assemblies Constraints to a selected Point or Routing::ControlPoint to mimic the update/move behavior of the input smart Point
StockOffsetPort	Routing::StockOffsetPort class handles the relationship between a component part's port occurrence and the dumb offset port in the work part
StockOffsetPortCollection	Represents a collection of StockOffsetPort objects
iterator	Iterator for accessing the contents of the collection
StockPort	Routing::StockPort objects are automatically created and updated by Routing::Stock objects
StockStyleBuilder	Builder class to assigns style to the selected stock
StockTransition	Represents Routing::StockTransition object
StockTransitionBuilder	Builder for creating/editing stockTransition
SubdivideSegmentBuilder	Represents a Routing::SubdivideSegmentBuilder
TerminalPort	A Routing::TerminalPort models the pins on an electrical connector
TerminalPortBuilder	Builder for creating the Terminal List Item for the ModelTerminals To create a new instance of this class, use Routing::RouteManager::TerminalPortBuilder Created in NX7.5.0
TerminalPortCollection	The collection of all Routing::TerminalPort s
iterator	Iterator for accessing the contents of the collection
TransformPathBuilder	Builder for the "Transform Path" operation
UnifyPathBuilder	Builder to unify Routing::Stock and Assemblies::Component based on specified characteristic values
WatertightFittingsBuilder	Represents a @link Routing::WatertightFittingsBuilder Routing::WatertightFittingsBuilder@endlink <br> To create a new instance of this class, use @link Routing::RouteManager::CreateWatertightFittingsBuilder Routing::RouteManager::CreateWatertightFittingsBuilder @endlink <br> Created in NX8.0.0
WindCatcher	Represents a Wind Catcher feature
WindCatcherBuilder	Builder class for Wind Catcher feature
Wire	The Routing Wire object is the set of information needed to define a ROUTE_wire
WireCollection	The Routing Wire object is a list of segments in a route and some stock
iterator	Iterator for accessing the contents of the collection
ShapeSearch	Provides classes and interfaces for Shape Search
SearchManager	This class manages Shape Search
ShapeSearchBuilder	This class provides the methods to execute shape search and get the searched results
SheetMetal	Provides classes and interfaces for Sheet Metal
FlatPatternSettings	Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings
FlatPatternCalloutTypeDisplay	The members of the following structure are the display data for a callout in a flat pattern drawing member view
FlatPatternObjectTypeDisplay	The members of the following structure are the display data for an object in a flat pattern drawing member view
SIM	Provides classes and interfaces for Machine Tool Builder and CAM-Simulation
IsvControlPanelBuilder	Represents a SIM::IsvControlPanelBuilder To create a new instance of this class, use SIM::KinematicConfigurator::CreateIsvControlPanelBuilder Created in NX8.0.0
KinematicAxis	Represents the SimKimAxis class object
KinematicAxisBuilder	Represents the SimKimAxisBuilder class object
KinematicChain	This class is used for add kinematic chain to the list
KinematicChainConfiguration	This class is used for define kinematic chains
KinematicChainList	Represents a list of objects
KinematicComponent	Represents the KinematicComponent class object
KinematicComponentBuilder	Represents the KinamaticComponentBuilder class object
KinematicComponentCollection	Represents the SimKimComponent Collection To obtain an instance of this class, refer to SIM::KinematicConfigurator Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
KinematicConfigurator	Represents the ISV base class object
KinematicJunction	Represents the KinematicJunction class object
KinematicJunctionBuilder	Represents the SimKimJunctionBuilder class object
KinematicJunctionBuilderList	Represents a list of objects
KinematicSinumerikCaBuilder	This class is used for edit sinumerik collision avoidance properties
NcChannelSelectionData	Represents the NcChannelSelectionData class object
SinumerikCaExportBuilder	This class is used for export a spf file
SinumerikCaFacetBuilder	This class is used for set the facet tolerance
SinumerikCaPlaceholderBuilder	This class is used for select or unselect component of the placeholder tools
SinumerikCaSimplifyBodiesBuilder	This class is used for replace geometry
Tooling	Provides classes and interfaces for Tooling
AddReusableFeatureBuilder	Represents a @link Tooling::AddReusableFeatureBuilder Tooling::AddReusableFeatureBuilder@endlink <br> To create a new instance of this class, use @link Tooling::AddReusableFeatureCollection::CreateBuilder Tooling::AddReusableFeatureCollection::CreateBuilder @endlink <br> Default values
AddReusableFeatureCollection	Represents a collection of AddReusableFeature To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
InputData	Defines the input data of AddReusableFeatureBuilder
iterator	Iterator for accessing the contents of the collection
AddReusablePart	Represents a Tooling::AddReusablePart To create a new instance of this class, use Tooling::AddReusablePartCollection::CreateBuilder Created in NX5.0.0
AddReusablePartCollection	Represents a collection of AddReusablePart To obtain an instance of this class, refer to Part Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
AssemblyDrawingBuilder	Represents a Tooling::AssemblyDrawingBuilder which is used to create or edit the Assembly Drawing
AssignPatchBuilder	Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces
AssignPatchCollection	Represents a collection of AssignPatch builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
AutoDieCollection	Represents a collection of Die Design Draw Punch To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
AutoDieGroup	Represents a group for Auto Stamping Die To obtain an instance of this class us Tooling::AutoDieCollection Created in NX8.0.0
AutoDimensionBuilder	Represents a Tooling::AutoDimensionBuilder which is used to create or edit the Auto Dimension
BendInsertDesignBuilder	Represents a Tooling::BendInsertDesignBuilder Bend Insert Design is to create inset puch or die for bend
BendInsertDesignCollection	Creates a Tooling::BendInsertDesignCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
BendOperationBuilder	Represents a Tooling::BendOperationBuilder builder
BendOperationCollection	Creates a Tooling::BendOperationBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
BlankGeneratorBuilder	Represents a @link Tooling::BlankGeneratorBuilder Tooling::BlankGeneratorBuilder@endlink This class is for Blank Generator Design UI <br> To create a new instance of this class, use @link Tooling::BlankGeneratorCollection::CreateBlankGeneratorBuilder Tooling::BlankGeneratorCollection::CreateBlankGeneratorBuilder @endlink <br> Created in NX7.5.0
BlankGeneratorCollection	Creates a Tooling::BlankGeneratorBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
BlankLayoutBuilder	Progressive Die Wizard blank layout builder <br> To create a new instance of this class, use @link Tooling::BlankLayoutCollection::CreateBlankLayoutBuilder Tooling::BlankLayoutCollection::CreateBlankLayoutBuilder @endlink <br> Default values
BlankLayoutCollection	Creates a Tooling::BlankLayoutBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
BlankNestingBuilder	Blank Nesting Builder of PDW, EDW and Die Engineering
BlankNestingCollection	Creates a Tooling::BlankNestingBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
BlendCurve3DBuilder	Represents a Tooling::BlendCurve3DBuilder builder which implements blend curves in one side where the corner radius is too small
BomBuilder	Represents a Tooling::BomBuilder builder <br> To create a new instance of this class, use @link Tooling::BomCollection::CreateBomBuilder Tooling::BomCollection::CreateBomBuilder @endlink <br> Default values
BomCollection	Represents a collection of Bom To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
BurringInsertBuilder	Progressive Die Wizard builder to design burring punch and die insert <br> To create a new instance of this class, use @link Tooling::BurringInsertCollection::CreateBurringInsertBuilder Tooling::BurringInsertCollection::CreateBurringInsertBuilder @endlink <br> Default values
BurringInsertCollection	Creates a Tooling::BurringInsertCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
CaeReuseLibrary	Represents a Tooling::CaeReuseLibrary To obtain an instance of this class, refer to CAE::BaseFEModel Created in NX7.5.2
CalculateAreaBuilder	The CalculateArea builder <br> To create a new instance of this class, use @link Tooling::CalculateAreaCollection::CreateBuilder Tooling::CalculateAreaCollection::CreateBuilder @endlink <br> Default values
CalculateAreaCollection	Represents a collection of CalculateArea builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
CAMDataManager	Represents an object that manages cam data objects
ChangeoverManagementBuilder	Represents a Tooling::ChangeoverManagementBuilder to support changeover workflow management
ChannelAdjustBuilder	The builder class for Channel Adjust which assists you to adjust the postion and the length of the channel
ChannelAdjustCollection	Creates a ChannelAdjust Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
ChannelFittingBuilder	The builder class for Channel Fitting which assists you to add cooling fitting
ChannelFittingCollection	Creates a ChannelFitting Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
ClearanceManagementBuilder	Progressive Die Wizard builder to management clearances
ClearanceManagementCollection	Creates a Tooling::ClearanceManagementCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
CloneObject	Represents the clone operation in Add Reusable Component Builder
ClonePart	Represents the part inforamtion to be cloned in Add Reusable Component Builder
CompDrawingBuilder	Represents a Tooling::CompDrawingBuilder which is used to create or edit the Component Drawing
ConceptPositionBuilder	Concept position builder for standard part design To create a new instance of this class, use Tooling::ConceptPositionCollection::CreateConceptPositionBuilder Created in NX6.0.0
ConceptPositionCollection	Represents a collection of ConceptPosition To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
ConcurrentDesignManagementBuilder	Represents a Tooling::ConcurrentDesignManagementBuilder to support concurrent design workflow management
CoolingConnectBuilder	The builder class for Cooling connection which assists you to create channel and connect it to other channels
CoolingConnectCollection	Creates a CoolingConnect Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
CoolingDefineChannelBuilder	The builder class for Cooling Define Channel which assists you to create channels directly
CoolingDefineChannelCollection	Creates a CoolingDefineChannel Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
CoolingExtendBuilder	The builder class for Channel Extend which assists you to extend the channel
CoolingExtendCollection	Creates a CoolingExtend Collection
iterator	Iterator for accessing the contents of the collection
CoolingFittingData	Represents the cooling fitting data in Add Channel Fitting Builder
CoolingPatternBuilder	The builder class for Cooling pattern which assists you to create channels with selected curves
CoolingPatternCollection	Creates a CoolingPattern Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
CornerDesignBuilder	Represents a Tooling::CornerDesignBuilder , Corner Design is to provide tools to make corner
CornerDesignCollection	Creates a Tooling::CornerDesignCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
CreateBoxBuilder	Represents a box creation operation <br> To create a new instance of this class, use @link Tooling::CreateBoxCollection::CreateBoxBuilder Tooling::CreateBoxCollection::CreateBoxBuilder @endlink <br> Default values
CreateBoxCollection	Creates CreateBoxBuilder collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
DesignTrimToolBuilder	Represents a builder to be used to create Mold Wizard design trim tool
DesignTrimToolCollection	Creates a DesignTrimToolCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
DieBaseBuilder	Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base
DieBaseCollection	Creates a Tooling::DieBaseCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
DieDesDrawDieBuilder	Represents the Die Design draw die management builder, which is to create a draw die by selected sheet body, curve and base plane
DieDesDrawPunchBuilder	Die Design draw punch management builder, create a draw die punch by selected sheet body, curve and base plane
DieDesignLowerBinderBuilder	Represents a Lower Binder builder To create a new instance of this class, use Tooling::AutoDieCollection::CreateDieDesignLowerBinderBuilder Created in NX9.0.0
DieDesignSettingBuilder	Represents a @link Tooling::DieDesignSettingBuilder Tooling::DieDesignSettingBuilder@endlink This class is for Die Design Setting UI <br> To create a new instance of this class, use @link Tooling::DieDesignSettingCollection::CreateDieDesignSettingBuilder Tooling::DieDesignSettingCollection::CreateDieDesignSettingBuilder @endlink <br> Created in NX7.5.0
DieDesignSettingCollection	Creates a Tooling::DieDesignSettingBuilder
iterator	Iterator for accessing the contents of the collection
DieDesignTrimPostBuilder	Represents a Trim Post builder To create a new instance of this class, use Tooling::AutoDieCollection::CreateDieDesignTrimPostBuilder Created in NX9.0.0
DieDesPierceInsertBuilder	Represents Die Design Pierce Insert builder
DieEngFormTaskBuilder	Represents a Form Task builder <br> To create a new instance of this class, use @link Tooling::AutoDieCollection::CreateDieEngFormTaskBuilder Tooling::AutoDieCollection::CreateDieEngFormTaskBuilder @endlink <br> Default values
DieEngTrimAngleCheck	Represents a die engineering trim angle check analysis object To create or edit an instance of this class, use Tooling::DieEngTrimAngleCheckBuilder Created in NX8.5.0
DieEngTrimAngleCheckBuilder	Represents a Trim Angle Check builder <br> To create a new instance of this class, use @link Tooling::AutoDieCollection::CreateDieEngTrimAngleCheckBuilder Tooling::AutoDieCollection::CreateDieEngTrimAngleCheckBuilder @endlink <br> Default values
DirectUnbendBuilder	The builder contains all inputs for direct unbend
DirectUnfoldBuilder	The builder contains all inputs for direct unfolding
DirectUnfoldCollection	Creates a Tooling::DirectUnfoldBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
DrawingSheetNameBuilder	Represents a Tooling::DrawingSheetNameBuilder To create a new instance of this class, use Tooling::ToolingDrawingCollection::CreateDrawingSheetNameBuilder Created in NX8.5.0
EdgePatchBuilder	Represents a builder to be used to create edge patch surfaces
EdgePatchCollection	Represents a collection of EdgePatch builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
EjectorPostProcessingBuilder	Represents a builder to be used to create Mold Wizard ejector post processing
EjectorPostProcessingCollection	Creates a EjectorPostProcessingCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
EjectorTableBuilder	Represens a ejector table builder
EjectorTableData	Represents the ejector table data in Ejector Table Builder
ElectrodeBlankBuilder	Design electrode blank builder to create an electrode blank for the selected body
ElectrodeCheckingBuilder	Electrode Checking builder to check the touch status of all electrode
ElectrodeComponentBuilder	Electrode component builder to install holder and pallet
ElectrodeCopyBuilder	The ElectrodeCopy builder <br> To create a new instance of this class, use @link Tooling::ElectrodeCopyCollection::CreateElectrodeCopyBuilder Tooling::ElectrodeCopyCollection::CreateElectrodeCopyBuilder @endlink <br> Default values
ElectrodeCopyCollection	Represents a collection of ElectrodeCopy builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
ElectrodeDeleteBuilder	Electrode delete component builder to remove blank, pallet and holder from assembly
ElectrodeDesign	Represents an Electrode Design
ElectrodeDesignCollection	Represents a collection of Electrode Design
iterator	Iterator for accessing the contents of the collection
ElectrodeInitializationBuilder	Electrode initialize project builder to creates an electrode design assembly
EnlargeSurfaceBuilder	Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges, curves, datum planes or faces
EnlargeSurfaceCollection	Represents a collection of Enlarge Surface To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
EWDraftingBuilder	Represents the drafting builder which is used to create electrode drafting
EWMultiPositionBuilder	Represents the multiple position builder which is used to get transformed electrode heads together
EWMultiPositionCollection	Creates EWMultiPosition builder collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
FaceAttributeBuilder	Represents a builder to be used to create face attribute
FaceColorManagementBuilder	Tooling builder to assign and edit color of objects <br> To create a new instance of this class, use @link Tooling::FaceColorManagementCollection::CreateFaceColorManagementBuilder Tooling::FaceColorManagementCollection::CreateFaceColorManagementBuilder @endlink <br> Default values
FaceColorManagementCollection	Creates a Tooling::FaceColorManagementBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
FaceSplitBuilder	Represents a face split operation <br> To create a new instance of this class, use @link Tooling::FaceSplitCollection::CreateFaceSplitBuilder Tooling::FaceSplitCollection::CreateFaceSplitBuilder @endlink <br> Default values
FaceSplitCollection	Creates Face Split collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
FamilyMoldBuilder	Creates a Mold Wizard Family Mold builder To create a new instance of this class, use Tooling::FamilyMoldCollection::CreateFamilyMoldBuilder Created in NX6.0.0
FamilyMoldCollection	Creates a FamilyMoldCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
FastenerAssemConfigBuilder	Represents a Fastener Assem Config Collection
FastenerAssemConfigCollection	Represents a collection of FastenerAssy To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
FastenerAssy	Represents a Tooling::FastenerAssy To create a new instance of this class, use Tooling::FastenerAssyCollection::CreateBuilder Created in NX5.0.0
FastenerAssyCollection	Represents a collection of FastenerAssy To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX5.0.0
iterator	Iterator for accessing the contents of the collection
FastenerAssyCustomizationBuilder	Fastener assembly customization builder
FastenerAssyCustomizationCollection	Represents a collection of FastenerAssyCustomizationBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
FastenerRemoveNodeBuilder	Fastener remove node builder
FastenerRemoveNodeCollection	Represents a collection of FastenerRemoveNodeBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
FlowAnalysisBuilder	Represents the builder which is used to create flow analysis
FlowDisplayBuilder	Represents the builder which is used to create flow analysis
ForceCalculationBuilder	Represents a @link Tooling::ForceCalculationBuilder Tooling::ForceCalculationBuilder@endlink Force Calculation Design is to calculate force of process <br> To create a new instance of this class, use @link Tooling::ForceCalculationCollection::CreateForceCalculationBuilder Tooling::ForceCalculationCollection::CreateForceCalculationBuilder @endlink <br> Default values
ForceCalculationCollection	Creates a Tooling::ForceCalculationBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
FormingInsertBuilder	Progressive Die Wizard builder to design forming punch and die insert <br> To create a new instance of this class, use @link Tooling::FormingInsertCollection::CreateFormingInsertBuilder Tooling::FormingInsertCollection::CreateFormingInsertBuilder @endlink <br> Default values
FormingInsertCollection	Creates a Tooling::FormingInsertBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
GuidedExtensionBuilder	Builder for creating Guided Extension surface in NX <br> To create a new instance of this class, use @link Tooling::GuidedExtensionManager::CreateBuilder Tooling::GuidedExtensionManager::CreateBuilder @endlink <br> Default values
GuidedExtensionManager	Represents the manager of the GuidedExtension builder To obtain an instance of this class, refer to Tooling::ToolingManager
HoleManufacturingNoteBuilder	Tooling builder for HoleManufacturingNote <br> To create a new instance of this class, use @link Tooling::HoleManufacturingNoteCollection::CreateHoleManufacturingNoteBuilder Tooling::HoleManufacturingNoteCollection::CreateHoleManufacturingNoteBuilder @endlink <br> Default values
HoleManufacturingNoteCollection	Creates a Tooling::HoleManufacturingNoteBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
HoleReportBuilder	Represents a @link Tooling::HoleReportBuilder Tooling::HoleReportBuilder@endlink This class is for Hole Report Design UI <br> To create a new instance of this class, use @link Tooling::HoleReportCollection::CreateHoleReportBuilder Tooling::HoleReportCollection::CreateHoleReportBuilder @endlink <br> Default values
HoleReportCollection	Creates a Tooling::HoleReportBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
InitProjBuilder	Represents a @link Tooling::InitProjBuilder Tooling::InitProjBuilder@endlink <br> To create a new instance of this class, use @link Tooling::InitProjCollection::CreateInitProjBuilder Tooling::InitProjCollection::CreateInitProjBuilder @endlink <br> Default values
InitProjCollection	Represents a collection of InitProj To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
InitProjectBuilder	Mold Wizard initialize project builder <br> To create a new instance of this class, use @link Tooling::InitProjectCollection::CreateBuilder Tooling::InitProjectCollection::CreateBuilder @endlink <br> Default values
InitProjectCollection	Represents a collection of InitProject builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
InsertAuxiliaryBuilder	PDW insert auxiliary builder to design various auxiliaries of insert group <br> To create a new instance of this class, use @link Tooling::InsertAuxiliaryCollection::CreateInsertAuxiliaryBuilder Tooling::InsertAuxiliaryCollection::CreateInsertAuxiliaryBuilder @endlink <br> Default values
InsertAuxiliaryCollection	Creates a Tooling::InsertAuxiliaryBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
IntermediateStageBuilder	Represents a Tooling::IntermediateStageBuilder builder
IntermediateStageCollection	Creates a Tooling::IntermediateStageBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
LayoutBuilder	Represents a Tooling::LayoutBuilder builder <br> To create a new instance of this class, use @link Tooling::MWLayoutCollection::CreateLayoutBuilder Tooling::MWLayoutCollection::CreateLayoutBuilder @endlink <br> Default values
LayoutManagementBuilder	Layout Management Builder of Engineering Die Wizard <br> To create a new instance of this class, use @link Tooling::LayoutManagementCollection::CreateLayoutManagementBuilder Tooling::LayoutManagementCollection::CreateLayoutManagementBuilder @endlink <br> Default values
LayoutManagementCollection	Creates a Tooling::LayoutManagementBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
LayoutRepositionBuilder	Represents a Tooling::LayoutRepositionBuilder builder <br> To create a new instance of this class, use @link Tooling::MWLayoutCollection::CreateLayoutRepositionBuilder Tooling::MWLayoutCollection::CreateLayoutRepositionBuilder @endlink <br> Default values
LsdynaFormAnalysisResultDisplayBuilder	Represents a Ly-Dyna Formability Analysis - Result Display builder <br> To create a new instance of this class, use @link Tooling::AutoDieCollection::CreateLsdynaFormAnalysisResultDisplayBuilder Tooling::AutoDieCollection::CreateLsdynaFormAnalysisResultDisplayBuilder @endlink <br> Default values
LsdynaGeometryPreparationBuilder	Stamping Die LS-Dyna integration draw geometry preprare builder
LsdynaKfileGeneratorBuilder	Represents LS-Dyna K file builder - K file generator builder <br> To create a new instance of this class, use @link Tooling::AutoDieCollection::CreateLsdynaKfileGeneratorBuilder Tooling::AutoDieCollection::CreateLsdynaKfileGeneratorBuilder @endlink <br> Default values
ManufacturingGeometryBuilder	Represents a builder to be used to create manufacturing geometry
ManufacturingGeometryCollection	Represents a collection of Manufacturing Geometry builder
iterator	Iterator for accessing the contents of the collection
MoldCsysBuilder	Mold Wizard MoldCsys project builder <br> To create a new instance of this class, use @link Tooling::MoldCsysCollection::CreateMoldCsysBuilder Tooling::MoldCsysCollection::CreateMoldCsysBuilder @endlink <br> Default values
MoldCsysCollection	Creates a MoldCsysCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MoldDesign	Represents an Mold Design
MoldDesignCollection	Represents a collection of Mold Design
iterator	Iterator for accessing the contents of the collection
MoldInsertBuilder	Mold Wizard mold insert management builder <br> To create a new instance of this class, use @link Tooling::MoldInsertCollection::CreateMoldInsertBuilder Tooling::MoldInsertCollection::CreateMoldInsertBuilder @endlink <br> Default values
MoldInsertCollection	Creates a MoldInsertCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MoldProcessBuilder	Represents a Tooling::MoldProcessBuilder builder <br> To create a new instance of this class, use @link Tooling::MoldProcessCollection::CreateMoldProcessBuilder Tooling::MoldProcessCollection::CreateMoldProcessBuilder @endlink <br> Default values
MoldProcessCollection	Represents a collection of Mold Process To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MoldwizardManager	Provides create builder methods for Moldwizard
MotionSimulationBuilder	Represents a Tooling::MotionSimulationBuilder to support dynamic interference check
MotionSimulationCollection	Represents a collection of MotionSimulation
iterator	Iterator for accessing the contents of the collection
MWCopySheetsBuilder	Builder for copying sheets in the Mold Wizard application <br> To create a new instance of this class, use @link Tooling::MWCopySheetsCollection::CreateBuilder Tooling::MWCopySheetsCollection::CreateBuilder @endlink <br> Default values
MWCopySheetsCollection	Represents a collection of MWCopySheets builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
MWDefineRegionsBuilder	The MWDefineRegions builder <br> To create a new instance of this class, use @link Tooling::MWDefineRegionsCollection::CreateBuilder Tooling::MWDefineRegionsCollection::CreateBuilder @endlink <br> Default values
MWDefineRegionsCollection	Represents a collection of MWDefineRegions builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MWDefineSheetsBuilder	Builder for defining sheets in Mold Wizard <br> To create a new instance of this class, use @link Tooling::MWDefineSheetsCollection::CreateBuilder Tooling::MWDefineSheetsCollection::CreateBuilder @endlink <br> Default values
MWDefineSheetsCollection	Represents a collection of MWDefineSheets builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MWDesignGuideLinesBuilder	The builder for designing guide lines in Mold Wizard
MWDesignGuideLinesCollection	Represents a collection of MWDesignGuideLines builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
MWDesignPartingSurfaceBuilder	The builder for designing parting surface in Mold Wizard
MWDesignPartingSurfaceCollection	Represents a collection of MWDesignPartingSurface builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
MWLayoutCollection	Creates Mold Wizard layout collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MWMoldedPartValidationBuilder	Represents a builder to be used to perform Molded Part Validation analysis
MWMoldedPartValidationManager	Represents a manager of the MWMoldedPartValidation builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
MWPartingManagerBuilder	Builder for the Parting Manager in the Mold Wizard application To create a new instance of this class, use Tooling::MWPartingManagerCollection::CreateBuilder Created in NX7.5.0
MWPartingManagerCollection	Represents a collection of MWPartingManager builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
MWSearchRegionBuilder	The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges
MWSearchRegionCollection	Represents a collection of MWSearchRegion builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
MWTraversePartingLinesBuilder	Builder for creating parting lines by traversing in the Mold Wizard application To create a new instance of this class, use Tooling::MWTraversePartingLinesCollection::CreateBuilder Created in NX7.5.0
MWTraversePartingLinesCollection	Represents a collection of the MWTraversePartingLines builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
ObjectAttributeManagementBuilder	Tooling builder to assign and edit attributes of objects <br> To create a new instance of this class, use @link Tooling::ObjectAttributeManagementCollection::CreateObjectAttributeManagementBuilder Tooling::ObjectAttributeManagementCollection::CreateObjectAttributeManagementBuilder @endlink <br> Default values
ObjectAttributeManagementCollection	Creates a Tooling::ObjectAttributeManagementBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX9.0.0
iterator	Iterator for accessing the contents of the collection
OffsetCurve3DBuilder	Represents a Tooling::OffsetCurve3DBuilder builder which implements offset curves along a direction with offset distance in three dimension
PiercingInsertBuilder	Represents piercing insert builder
PiercingInsertCollection	Creates a Tooling::PiercingInsertBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
PocketBuilder	Mold Wizard pocket management builder To create a new instance of this class, use Tooling::PocketCollection::CreatePocketBuilder Created in NX6.0.0
PocketCollection	Creates a PocketBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
ProfileSplitBuilder	The ProfileSplit builder To create a new instance of this class, use Tooling::ProfileSplitCollection::CreateProfileSplitBuilder Created in NX6.0.0
ProfileSplitCollection	Represents a collection of ProfileSplit builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
ProgressiveDieManager	Provides create builder methods for Progressive Die
QuickQuotationBuilder	Progressive Die Wizard builder to create quick quotation
QuickQuotationCollection	Creates a Tooling::QuickQuotationBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
ReferenceBlendBuilder	The ReferenceBlend builder To create a new instance of this class, use Tooling::ReferenceBlendCollection::CreateReferenceBlendBuilder Created in NX7.0.0
ReferenceBlendCollection	Creates reference blend collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
ReliefDesignBuilder	Represents a Tooling::ReliefDesignBuilder Relief Design is to cut relief pocket for forming region
ReliefDesignCollection	Creates a Tooling::ReliefDesignBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
RemoveHolesBuilder	Remove Hole is used to patch holes for a solid body
ReplaceSolidBuilder	Represents a replace solid operation
ReplaceSolidCollection	Creates ReplaceSolidBuilder collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
ReusableObject	Represents a Tooling::ReusableObject To create a new instance of this class, use Tooling::ToolingManager::CreateReusableObject Created in NX7.5.2
ReusableObjectManager	Represents a collection of ReusableObject To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
ReusableObjectPasteBuilder	Represents a Tooling::ReusableObjectPasteBuilder Use the ReusableObjectManager class to create a ReusableObjectPasteBuilder
ReusablePocketBuilder	Reusable pocket builder
ReusablePocketCollection	Represents a collection of ReusablePocketBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
RunnerBuilder	Mold Wizard runner management builder, select curves as runner guide, choose section type and edit section parameters, optional choose boolean type to create runner channel
RunnerCollection	Represents a collection of Runner To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
ScrapDesignBuilder	Represents a scrap design builder <br> To create a new instance of this class, use @link Tooling::ScrapDesignCollection::CreateScrapDesignBuilder Tooling::ScrapDesignCollection::CreateScrapDesignBuilder @endlink <br> Default values
ScrapDesignCollection	Represents a collection of ScrapDesign To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
SectionLineCreationBuilder	Represents a Tooling::SectionLineCreationBuilder which is used to create or edit the section line creation
SelectReuseLibraryItemBuilder	Select a part from the reuse library Created in NX9.0.0
SelectReuseLibraryListBuilder	Select a list of objects from the reuse library Created in NX9.0.0
SelectReuseLibraryListItemBuilder	Select reuse library list item Created in NX9.0.0
SelectReuseLibraryListItemBuilderList	Represents a list of objects
SIZERCollection	Represents a collection of SIZER To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
SIZERExportBuilder	Exports input parameters for motor selection to SIZER drive design to support the sizing, configuration, and selection of drive components
MCDMechanicalData	Defines the mechanical data in MCD mode
MechanicalData	Defines the mechanical data in Motion mode
SIZERImportBuilder	Imports results for motor selection from SIZER drive design based on the sizing, configuration, and selection of drive components
SolidPatchBuilder	Represents a builder to be used to create a solid patch
SolidPatchCollection	Represents a collection of SolidPatch builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
SpecifyBaffleBuilder	Represents a builder to be used to create specify baffle
SpecifyBaffleCollection	Represents a collection of Specify Baffle builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
SpecifyCircuitBuilder	Represents a builder to be used to create specify circuit
SpecifyCircuitCollection	Represents a collection of Specify Circuit builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
SplitSolidBuilder	Represents a builder to be used to split a solid with geometry tools
SplitSolidCollection	Creates SplitSolid builder collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.0.0
iterator	Iterator for accessing the contents of the collection
SpreadsheetData	Represents the spreadsheet
SpreadsheetDataParameter	Represents parameter in the spreadsheet
StandardPartBuilder	Represents a builder to be used to create Mold Wizard Standard Part
StandardPartCollection	Creates a StandardPartCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
StandardPartPositionBuilder	Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position
StandardPartPositionCollection	Creates a StandardPartPositionCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.5.0
iterator	Iterator for accessing the contents of the collection
StockSizeBuilder	Represents a Tooling::StockSizeBuilder builder
StockSizeCollection	Represents a collection of StockSize To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
StripLayoutBuilder	Represents a @link Tooling::StripLayoutBuilder Tooling::StripLayoutBuilder@endlink This class is for Strip Layout Design UI <br> To create a new instance of this class, use @link Tooling::StripLayoutCollection::CreateStripLayoutBuilder Tooling::StripLayoutCollection::CreateStripLayoutBuilder @endlink <br> Created in NX6.0.0
StripLayoutCollection	Creates a Tooling::StripLayoutBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
SubInsertBuilder	The SubInsert builder <br> To create a new instance of this class, use @link Tooling::SubInsertCollection::CreateSubInsertBuilder Tooling::SubInsertCollection::CreateSubInsertBuilder @endlink <br> Default values
SubInsertCollection	Creates SubInsert builder collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
ToolingDrawingCollection	Creates a Tooling::CompDrawingBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
ToolingManager	Contains the collection objects for creating and iterating over Reuse Library objects
ToolingSession	Represents Tooling session To obtain an instance of this class, refer to Session Created in NX8.0.0
TraverseLoopBuilder	The builder class for Traverse Loop component which assists you to select or traverse a string of adjacent curves or edges
TraverseLoopCollection	Represents a collection of TraverseLoopbuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
TrimMoldComponentsBuilder	Represents a builder to be used to create Mold Wizard trim mold components
TrimMoldComponentsCollection	Creates a TrimMoldComponentsCollection class To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
TrimRegionBuilder	Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies
TrimRegionCollection	Represents a collection of Trim Region To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
TrimSolidBuilder	Mold Wizard trim solid management builder, trims bounding box body with region, subtract bounding box with workpiece or keep region and box
TrimSolidCollection	Represents a collection of Trim Solid To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
UndersizeBuilder	Represents a @link UndersizeBuilder UndersizeBuilder@endlink <br> To create a new instance of this class, use @link Tooling::UndersizeCollection::CreateUndersizeBuilder Tooling::UndersizeCollection::CreateUndersizeBuilder @endlink <br> Default values
UndersizeCollection	Creates a undersize builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
UniversalUnformBuilder	Represents a Tooling::UniversalUnformBuilder builder
UnusedFileManagementBuilder	Represents a Tooling::UnusedFileManagementBuilder Unused File Management is to manage the unused files of the project
UnusedFileManagementCollection	Creates a Tooling::UnusedFileManagementCollection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX7.5.0
iterator	Iterator for accessing the contents of the collection
ValidCheckBuilder	This is the JA builder for static interference check <br> To create a new instance of this class, use @link Tooling::ValidCheckCollection::CreateValidCheckBuilder Tooling::ValidCheckCollection::CreateValidCheckBuilder @endlink <br> Default values
ValidCheckCollection	Represents a collection of ValidCheck To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
WallThicknessCheckerBuilder	Represents a builder to be used to perform wall thickness analysis
WallThicknessCheckerManager	Represents the manager of the WallThicknessChecker builder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
WireHoleBuilder	Represents a @link Tooling::WireHoleBuilder Tooling::WireHoleBuilder@endlink This class is for Wire Hole Design UI <br> To create a new instance of this class, use @link Tooling::WireHoleCollection::CreateWireHoleBuilder Tooling::WireHoleCollection::CreateWireHoleBuilder @endlink <br> Default values
WireHoleCollection	Creates a Tooling::WireHoleBuilder To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
WorkflowManagementCollection	Creates a Workflow Management Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX8.0.0
iterator	Iterator for accessing the contents of the collection
WorkpieceBuilder	Mold Wizard work piece builder <br> To create a new instance of this class, use @link Tooling::WorkpieceCollection::CreateWorkpieceBuilder Tooling::WorkpieceCollection::CreateWorkpieceBuilder @endlink <br> Default values
WorkpieceCollection	Creates a Workpiece Collection To obtain an instance of this class, refer to Tooling::ToolingManager Created in NX6.0.0
iterator	Iterator for accessing the contents of the collection
UIStyler	Provides classes and interfaces for User Interface Styler
Attachment	Represents an Attachment for UI Styler Created in NX5.0.0
BitMap	Represents a Bit Map for UI Styler
ButtonLayout	Represents a Button Layout for UI Styler
CollapsibleGroup	Represents a Collapsible Group for UI Styler Created in NX5.0.0
ColorTool	Represents a ColorTool for UI Styler
Dialog	Represents a DialogItem for UI Styler
DialogItem	Represents a DialogItem for UI Styler
FileOperationData	Represents a FileOperationData for UI Styler Created in NX5.0.0
GroupBox	Represents a GroupBox for UI Styler
IntegerItem	Represents a Integer for UI Styler
IntegerScale	Represents a IntegerScale for UI Styler Created in NX5.0.0
LabelItem	Represents a Label for UI Styler
MultiSelectList	Represents a MultiSelectList for UI Styler Created in NX5.0.0
MultiTextBox	Represents a MultiTextBox for UI Styler
OptionMenu	Represents a OptionMenu for UI Styler
OptionToggle	Represents a OptionToggle for UI Styler Created in NX5.0.0
PageSwitchData	Represents a PageSwitchData for UI Styler Created in NX5.0.0
PropertyPage	Represents a PropertyPage for UI Styler Created in NX5.0.0
PushButton	Represents a PushButton for UI Styler Created in NX5.0.0
RadioBox	Represents a RadioBox for UI Styler Created in NX5.0.0
RealItem	Represents a Real for UI Styler Created in NX5.0.0
RealScale	Represents a RealScale for UI Styler Created in NX5.0.0
RowColumn	Represents a RowColumn for UI Styler Created in NX5.0.0
ScrolledWindow	Represents a ScrolledWindow for UI Styler Created in NX5.0.0
SelectionBox	Represents a SelectionBox for UI Styler Created in NX5.0.0
Separator	Represents a Separator for UI Styler Created in NX5.0.0
SingleSelectList	Represents a SingleSelectList for UI Styler Created in NX5.0.0
StringItem	Represents a StringItem for UI Styler
Styler	Represents a Uistyler for UI Styler To obtain an instance of this class, refer to UI Created in NX5.0.0
StylerEvent	Represents a StylerEvent Created in NX5.0.0
StylerItem	Represents a Styler Item Created in NX5.0.0
TabControl	Represents a Tab Control for UI Styler
Toggle	Represents a Toggle for UI Styler
ToolPalette	Represents a ToolPalette for UI Styler Created in NX5.0.0
WideString	Represents a WideString for UI Styler Created in NX5.0.0
UserDefinedObjects	Provides classes and interfaces for User Defined Objects (UDOs)
UserDefinedClass	JA interface for the UserDefinedClass object To create a new instance of this class, use UserDefinedObjects::UserDefinedClassManager::NewUserDefinedClass Created in NX5.0.0
UserDefinedClassManager	JA interface for the UserDefinedClassManager object To obtain an instance of this class, refer to Session Created in NX5.0.0
UserDefinedDisplayEvent	Implements the Display Event Object for UDO's Created in NX5.0.0
UserDefinedEvent	Implements the Event Object for UDO's Created in NX5.0.0
UserDefinedLinkEvent	Implements the Display Event Object for UDO's Created in NX5.0.0
UserDefinedObject	JA interface for the UserDefinedObject object Created in NX5.0.0
LinkDefinition	Contains the linked object and it's status along with the type of link
UserDefinedObjectDisplayContext	This class is used to display User Defined Objects Created in NX5.0.0
UserDefinedObjectManager	This class creates and manages UserDefinedObjects To obtain an instance of this class, refer to BasePart Created in NX5.0.0
LinkedUdoDefinition	Used to define a link to a UserDefinedObject
Validate	Provides classes and interfaces for Validation Utilities
CheckerNode	Represents a checker that validator will use to check against part node
Override	Represents a Validate::Override object
OverrideBuilder	Represents a @link Validate::Override Validate::Override@endlink builder <br> To create a new instance of this class, use @link Validate::ResultObject::CreateOverrideBuilder Validate::ResultObject::CreateOverrideBuilder @endlink <br> Default values
Parser	Represents a NX Validate::Parser
PartNode	Represents a part file that validator will check against
Requirement	Represents a Validate::Requirement object
RequirementBuilder	Represents a @link Validate::Requirement Validate::Requirement@endlink builder <br> To create a new instance of this class, use @link Validate::RequirementCollection::CreateRequirementBuilder Validate::RequirementCollection::CreateRequirementBuilder @endlink <br> Default values
RequirementCheck	Represents an NX Validate::RequirementCheck object
RequirementCheckCollection	Represents an NX RequirementCheckCollection object
iterator	Iterator for accessing the contents of the collection
RequirementCollection	Represents an NX Validate::RequirementCollection object
ResultObject	Represents a check-mate result object
ValidationManager	Represents an object that manages validator and parser associated instance objects
XmlComparator	Provides a generic comparator for finding differences between two XML format files
Options	Represents config options in comparison For example:
VisualReporting	Provides classes and interfaces for Visual Reporting
Classifier	A Classifier within a VisualReporting::Rule
Condition	A Condition within a VisualReporting::Rule
GroupLabel	A group label corresponds to a group of objects in the results of an applied VisualReporting::VisualReport
Property	A property within either a VisualReporting::Rule or a VisualReporting::Condition , or used as referenced property information for the report
ResultCategory	A result category within a VisualReporting::VisualReport
Rule	A rule within a VisualReporting::VisualReport
SpecifyDateBuilder	Represents a Specify Date Builder To create a new instance of this class, use VisualReporting::VisualReportManager::CreateSpecifyDateBuilder Created in NX8.0.0
UnmatchedResultCategory	An unmatched result category within a VisualReporting::VisualReport
VisualReport	A visual report can be activated by the VisualReporting::VisualReportManager to apply colors to objects in the graphics window
VisualReportBuilder	A Builder for creating and editing VisualReporting::VisualReport s
VisualReportCollection	A collection of visual reports
iterator	Iterator for accessing the contents of the collection
VisualReportExplorer	The Explorer of the results of a visual report
VisualReportManager	A manager for load, creation and activation of visual reports
Weld	Provides classes and interfaces for Weld
AutoPoint	This class will automatically create weld points from selected components To create or edit an instance of this class, use Weld::AutoPointBuilder Created in NX6.0.0
AutoPointBuilder	Represents a @link Weld::AutoPointBuilder Weld::AutoPointBuilder@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreateAutoPointBuilder Weld::WeldManager::CreateAutoPointBuilder @endlink <br> Default values
AutoWeldSymbolsBuilder	Represents a Weld::AutoWeldSymbolsBuilder builder To create a new instance of this class, use Weld::WeldManager::CreateAutoWeldSymbolsBuilder Created in NX8.0.0
CharacteristicsBuilder	This builder allows you to define the attribute values to be set on the output of the weld feature
CharacteristicsSelectionBuilder	This builder allows you to define the attribute values to be set on the output of the weld feature
CharacteristicsValueBuilder	The object containing the information about the attribute to be placed on the output of the weld feature
CompoundWeld	Represents a compound weld feature
CompoundWeldBuilder	Represents a Weld::CompoundWeld builder
ConnectedFaceFinderBuilder	Represents a builder to run the Connected Face Finder operation
ConnectionFinderBuilder	Represents a builder to display, manage, delete, and allow the user to reparent face information for the weld objects
CustomManager	Represents weld interface to customize the creation of welding joint features
iterator	Iterator for accessing the contents of the collection
DatumCommonBuilder	Used to create or edit a Weld::DatumSurface or Weld::DatumPin feature
DatumIconBuilder	Represents a Weld::DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators
DatumPin	Represents a Weld Datum Pin feature To create or edit an instance of this class, use Weld::DatumPinBuilder Created in NX8.5.0
DatumPinBuilder	Used to create or edit a Weld::DatumPin feature
DatumSurface	Represents a Weld Datum Surface feature To create or edit an instance of this class, use Weld::DatumSurfaceBuilder Created in NX8.5.0
DatumSurfaceBuilder	Used to create or edit a Weld::DatumSurface feature
EasyPatternBuilder	Represents the easy pattern builder
EdgePrep	Represents a Weld Edge Prep feature To create or edit an instance of this class, use Weld::EdgePrepBuilder Created in NX8.0.0
EdgePrepBuilder	A builder used to create or edit a Weld::EdgePrep feature
EdgePrepValuesBuilder	Used to view or edit the values used to define the welding joint and edge preparation
ExportWeldBuilder	Represents a ExportWeldBuilder class <br> To create a new instance of this class, use @link Weld::WeldManager::CreateExportWeldBuilder Weld::WeldManager::CreateExportWeldBuilder @endlink <br> Default values
ExportWeldJointBuilder	Represents exporting weld joints
Extract	Represents a Linked Feature created in the Weld Assistant
Fill	Represents a Weld Fill feature To create or edit an instance of this class, use Weld::WeldFillBuilder Created in NX7.5.0
Fillet	Represents a Weld Fillet Feature
FilletBuilder	Represents a @link Weld::Fillet Weld::Fillet@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreateFilletBuilder Weld::WeldManager::CreateFilletBuilder @endlink <br> Default values
Groove	Represents a WeldGroove feature
GrooveBuilder	Represents a Groove Weld feature To create a new instance of this class, use Weld::WeldManager::CreateWeldGrooveBuilder Created in NX5.0.0
InformationBuilder	This class is used by "Fabrication Information" to output fabrication objects information
JointExitBuilder	Used to set custom edge preparation parameters of a Weld::WeldJoint feaure
FilletSizes	The structure for defining fillet weld lengths
JointItemBuilder	Used to create or edit a Weld::WeldJoint feature
JointItemBuilderList	Represents a list of objects
Jointmark	Represents a Weld Jointmark Feature
JointmarkBuilder	Represents a @link Weld::Jointmark Weld::Jointmark@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreateJointmarkBuilder Weld::WeldManager::CreateJointmarkBuilder @endlink <br> Default values
JointmarkFaceSetsBuilder	Used to create or edit a set of faces for Jointmark To create a new instance of this class, use Weld::JointmarkBuilder::NewFaceSets Created in NX9.0.0
JointmarkFaceSetsBuilderList	Represents a list of objects
JointmarkGuideBuilder	Used to create or edit a guide curve for Jointmark
JointmarkGuideBuilderList	Represents a list of objects
JointmarkPointsBuilder	Used to create or edit a point in the list of points for Jointmark To create a new instance of this class, use Weld::JointmarkBuilder::NewPoints Created in NX9.0.0
JointmarkPointsBuilderList	Represents a list of objects
LogInfo	Represents entity and its log message Created in NX7.5.0
PlugSlot	Create a PlugSlot feature for Weld To create or edit an instance of this class, use Weld::PlugSlotBuilder Created in NX8.0.0
PlugSlotBuilder	Represents a @link Weld::PlugSlot Weld::PlugSlot@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreatePlugSlotBuilder Weld::WeldManager::CreatePlugSlotBuilder @endlink <br> Default values
SelectDatumPin	Represents a single object selection
SelectDatumSurface	Represents a single object selection
StructureWeldBuilder	This class is used to create or edit the information shared among all Structure Weld builders
SurfaceWeld	Represents a surface weld feature To create or edit an instance of this class, use Weld::SurfaceWeldBuilder Created in NX9.0.0
SurfaceWeldBuilder	Use to create or edit a Weld::SurfaceWeld feature
UserDefinedWeld	Represents a User Defined Weld feature
UserDefinedWeldBuilder	Represents a Weld::UserDefinedWeldBuilder builder
WeldAdvisorBuilder	Represents a weld advisor test To create a new instance of this class, use Weld::WeldManager::CreateWeldAdvisorBuilder Created in NX7.5.0
WeldBead	Represents a Weld Bead feature To create or edit an instance of this class, use Weld::WeldBeadBuilder Created in NX7.5.0
WeldBeadBuilder	Used to create or edit a Weld::WeldBead feature
WeldBeadPathBuilder	Represents the path the bead shape will be swept along
WeldBeadPathBuilderList	Represents a list of objects
WeldBeadSizeBuilder	This builder is used to define the bead shape
WeldBeadSizeBuilderList	Represents a list of objects
WeldFillBuilder	A builder used to create or edit a Weld::Fill feature
WeldFillStripBuilder	A builder used to create or edit a single strip of the Weld::WeldFillBuilder
WeldFillStripBuilderList	Represents a list of objects
WeldGroove	Represents a Weld Groove Feature To create or edit an instance of this class, use Weld::WeldGrooveBuilder Created in NX9.0.0
WeldGrooveBuilder	Represents a @link Weld::WeldGroove Weld::WeldGroove@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreateWeldGroove1Builder Weld::WeldManager::CreateWeldGroove1Builder @endlink <br> Default values
WeldImportBuilder	Creates Weld features by reading a csv file To create a new instance of this class, use Weld::WeldManager::CreateImportBuilder Created in NX7.5.1
WeldJoint	Represents a weld joint feature To create or edit an instance of this class, use Weld::WeldJointBuilder Created in NX8.0.0
WeldJointBuilder	Used to create or edit a Weld::WeldJoint feature
JointMidPointData	Joint evaluation information at the mid point
WeldLabelBuilder	Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable
WeldManager	Manages weld features and assistant tools
iterator	Iterator for accessing the contents of the collection
WeldObjectBuilder	Represents a Weld::WeldObjectBuilder class used to collect welding objects created or edited from a command
FeatureInfo	Structure used to identify if each feature is newly created or edited
WeldPmiBuilder	Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable
WeldPoint	Represents a WeldPoint feature
WeldPointBuilder	Represents a Spot Weld feature <br> To create a new instance of this class, use @link Weld::WeldManager::CreateWeldPointBuilder Weld::WeldManager::CreateWeldPointBuilder @endlink <br> Default values
WeldPointExitBuilder	Represents a Weld::WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback
FeatureInfo	Structure used to identify newly created features
WeldPreferenceBuilder	Represents a @link Weld::WeldPreferenceBuilder Weld::WeldPreferenceBuilder@endlink builder <br> To create a new instance of this class, use @link Weld::WeldManager::CreatePreferenceBuilder Weld::WeldManager::CreatePreferenceBuilder @endlink <br> Default values
ApparentChainingRule	Represents a SelectionIntentRule that collects curves which appear connected or tangent connected in a particular drafting view
Arc	Represents an arc curve
ArcCollection	Represents a collection of arcs
iterator	Iterator for accessing the contents of the collection
ASCImporter	Represents a ASCImporter
AssembliesUtils	Contains various assembly utility methods To obtain an instance of this class, refer to Session Created in NX6.0.0
AttributeManager	Provides methods for querying and updating attributes
AttributePropertiesBaseBuilder	Represents an AttributePropertiesBaseBuilder to be used for creating attributes
AttributePropertiesBuilder	Represents an AttributePropertiesBuilder
AttributeTemplatesBuilder	Represents an AttributeTemplatesBuilder to be used when creating attribute templates
AttrTypeKey	This class contains the factory methods for creating a AttrTypeKey
AutomaticTraceline	Represents an automatic traceline
Axis	Represents an Axis class
AxisCollection	Represents a collection of Axis
iterator	Iterator for accessing the contents of the collection
BaseCallback	A base class for all NXOpen callback classes
BasePart	Base class for an NX part
HistoryEventInformation	Contains part history event information
IncompleteStatus	Incomplete part return data
TransientStatus	Transient part return data
BasePropertyTable	Represents a property table
BaseSession	A base class for NXOpen session objects
BasicEffectivityBuilder	Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values
Body	Represents a Body
BodyCollection	Represents a collection of bodies in a part To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
BodyDumbRule	Represents a SelectionIntentRule that collects bodies without any intent i.e
BodyFeatureRule	Represents a SelectionIntentRule that collects all bodies created or modified by a feature
BodyGroupRule	Represents a SelectionIntentRule that collects all bodies of a group
BodyList	Represents a list of objects
Builder	A Builder is an object that is used to create and edit other objects
CaeObjectType	Represent options for CAE selection
Callback0	Template base class for callbacks with no input arguments
Callback0Function	Template class for callbacks with no input arguments
Callback0List	Template class for callbacks with no input arguments
Callback0MemberFunction	Template class for callbacks with no input arguments that are member functions of a class
Callback1	Template base class for callbacks with one input argument
Callback1Function	Template class for callbacks with one input argument
Callback1List	Template class for callbacks with one input argument
Callback1MemberFunction	Template class for callbacks with one input argument that are member functions of a class
Callback2	Template base class for callbacks with two input arguments
Callback2Function	Template class for callbacks with two input arguments
Callback2List	Template class for callbacks with two input arguments
Callback2MemberFunction	Template class for callbacks with two input arguments that are member functions of a class
Callback3	Template base class for callbacks with three input arguments
Callback3Function	Template class for callbacks with three input arguments
Callback3List	Template class for callbacks with three input arguments
Callback3MemberFunction	Template class for callbacks with three input arguments that are member functions of a class
Callback4	Template base class for callbacks with four input arguments
Callback4Function	Template class for callbacks with four input arguments
Callback4List	Template class for callbacks with four input arguments
Callback4MemberFunction	Template class for callbacks with four input arguments that are member functions of a class
Callback5	Template base class for callbacks with five input arguments
Callback5Function	Template class for callbacks with five input arguments
Callback5List	Template class for callbacks with five input arguments
Callback5MemberFunction	Template class for callbacks with five input arguments that are member functions of a class
Callback6	Template base class for callbacks with six input arguments
Callback6Function	Template class for callbacks with six input arguments
Callback6List	Template class for callbacks with six input arguments
Callback6MemberFunction	Template class for callbacks with six input arguments that are member functions of a class
Callback7	Template base class for callbacks with seven input arguments
Callback7Function	Template class for callbacks with seven input arguments
Callback7List	Template class for callbacks with seven input arguments
Callback7MemberFunction	Template class for callbacks with seven input arguments that are member functions of a class
Callback8	Template base class for callbacks with eight input arguments
Callback8Function	Template class for callbacks with eight input arguments
Callback8List	Template class for callbacks with eight input arguments
Callback8MemberFunction	Template class for callbacks with eight input arguments that are member functions of a class
CartesianCoordinateSystem	Represents a cartesian coordinate system To create a new instance of this class, use CoordinateSystemCollection::CreateCoordinateSystem Created in NX4.0.0
Catiav4Creator	Represents a Catiav4Creator to be used when exporting the CATIA V4 Data This class is created using DexManager
Catiav4Importer	Represents a Catiav4Importer to be used when importing the CATIA V4 Data This class is created using DexManager
Catiav5Creator	Represents a Catiav5Creator to be used when exporting the CATIA V5 Data This class is created using DexManager
Catiav5Importer	Represents a Catiav5Importer to be used when importing the CATIA V5 Data This class is created using DexManager
CDF	Represents a CDF , which is a representation of an NX color palette
CGMBuilder	Represents a CGMBuilder to be used when exporting the Current Display or drawing sheets to a CGM
CGMImporter	Used to import a CGM file into the work part
ClipboardOperationsManager	Used to create importer objects
CollaborativeContentManager	Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode
CollaborativeDesign	A collaborative design is created in Teamcenter
CollaborativeDesignCollection	A collection of collaborative designs
iterator	Iterator for accessing the contents of the collection
ColorDefinition	Represents a ColorDefinition , which is a representation of one color on an NX color palette
ColorDefinitionRgb	Specifies rgb values for color
ColorManager	Contains functionality pertaining to colors To obtain an instance of this class, refer to BasePart Created in NX5.0.0
ColorWidth	Represents a ColorWidth used by WidthDefinition to define a custom width for each color
Conic	Represents a conic curve
ConvertToFromReferenceBuilder	Represents a ConvertToFromReferenceBuilder To create a new instance of this class, use SketchCollection::CreateConvertToFromReferenceBuilder Created in NX5.0.0
CoordinateSystem	Represents a coordinate system This is an abstract class Created in NX3.0.0
CoordinateSystemCollection	Represents a collection of coordinate systems To obtain an instance of this class, refer to BasePart Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
Curve	Represents a curve
CurveChainRule	Represents a SelectionIntentRule that collects end-to-end connected curves from the seed curve
CurveCollection	Represents a collection of Curve s
iterator	Iterator for accessing the contents of the collection
CurveDumbRule	Represents a SelectionIntentRule that collects curves without any intent i.e
CurveFeatureChainRule	Represents a SelectionIntentRule that collects end-to-end connected curves from the feature of the seed
CurveFeatureRule	Represents a SelectionIntentRule that collects all curves created by a feature
CurveFeatureTangentRule	Represents a SelectionIntentRule that collects tangent connected curves from the feature of the seed
CurveGroupRule	Represents a SelectionIntentRule that collects all curves of a group
CurveTangentRule	Represents a SelectionIntentRule that collects tangent connected curves from the seed curve
CustomPopupMenu	Represents Custom Popup Menu Item class Created in NX6.0.4
CustomPopupMenuHandler	Represents Custom Popup Menu Handler class Created in NX6.0.4
CustomPopupMenuItem	Represents Custom Popup Menu Item class Created in NX6.0.4
CustomWidth	Represents a CustomWidth used by WidthDefinition to define the three custom widths associated with each WidthDefinition
CutView	Represents a Cut View Cut Views may only be created via a Master Cut Builder
CutViewCollection	Represents a collection of CutView objects
iterator	Iterator for accessing the contents of the collection
CylindricalCoordinateSystem	Represents a cylindrical coordinate system To create a new instance of this class, use CoordinateSystemCollection::CreateCylindricalCoordinateSystem Created in NX4.0.0
DataContainer	Represents a list of data
DateBuilder	Allows a date and/or time to be input or output via the DateItem builder
DateItemBuilder	This class stores a date and time
DateItemBuilderList	Represents a list of objects
DatumAxis	Represents a datum axis This object can not be created by KF it's the display objet of the datum axis Created in NX3.0.0
DatumCollection	Represents a collection of datum geometry
iterator	Iterator for accessing the contents of the collection
DatumConstraint	Represents a constraint that specifies the location of a Features::DatumFeature
DatumPlane	Represents a datum plane This object can not be created by KF it's the display objet of the datum plane Created in NX3.0.0
Decal	Represents a Material Texture decal pair This class is restricted to being called from a program running during an Interactive NX session
DexBuilder	This is an abstract class that provides the basic functionality common to all dex builders
DexManager	Methods to create Dex Builder objects
Direction	Represents a direction
DirectionCollection	Represents a collection of Direction s
iterator	Iterator for accessing the contents of the collection
DisplayableObject	Base class for all objects that are displayable
DisplayManager	Manages the display and changes to it To obtain an instance of this class, refer to Session Created in NX3.0.0
J3dColor	3d interface color definition
J3dData	3d interface structure
J3dMaterial	3d interface material definition
DisplayModification	Represents changes to the display characteristics of an object Created in NX3.0.0
DraftingManager	Represents an object that manages drafting objects and member views
DraftPointDataCollection	This class contains the factory methods for creating a DraftPointData object
iterator	Iterator for accessing the contents of the collection
DrawingCompareManager	Represents an object that manages drawing compare
DxfdwgCreator	Represents a DxfdwgCreator to be used when exporting the DXF/DWG Data This class is created using DexManager
DxfdwgImporter	Represents a DxfdwgImporter to be used when importing the DXF/DWG Data This class is created using DexManager
Edge	Represents an edge An edge is obtained from its parent Body Created in NX3.0.0
EdgeBodyRule	Represents a SelectionIntentRule that collects all the edges of a body
EdgeBoundaryRule	Represents a SelectionIntentRule that collects all the edges of a face
EdgeChainRule	Represents a SelectionIntentRule that collects end-to-end connected edges from the body of the seed edge
EdgeDumbRule	Represents a SelectionIntentRule that collects edges without any intent i.e
EdgeFaceRule	Represents a SelectionIntentRule that collects all edges of a face
EdgeFeatureRule	Represents a SelectionIntentRule that collects all edges created or modified by a feature
EdgeIntersectRule	Represents a SelectionIntentRule that collects all intersection edges between a set of faces
EdgeMultipleSeedTangentRule	Represents a SelectionIntentRule that collects tangent connected edges from the body of the seed edge
EdgeSheetBoundaryRule	Represents a SelectionIntentRule that collects boundary edges of a sheet body
EdgeTangentRule	Represents a SelectionIntentRule that collects tangent connected edges from the body of the seed edge
EdgeVertexRule	Represents a SelectionIntentRule that collects the vertex edge and and its adjacent edges
EdgeVertexTangentRule	Represents a SelectionIntentRule that collects the vertex edge and the edges adjacent and tangent to it
EffectivityConditionBuilder	Represent a utility class to assign or edit discrete and range effectivity unit values in the context of a CollaborativeDesign
Ellipse	Represents an ellipse curve
EllipseCollection	Represents a collection of ellipses
iterator	Iterator for accessing the contents of the collection
EndCutBlockBuilder	Represents a End Cut Block Builder
EngineeringFunction	Contains Engineering Function methods To obtain an instance of this class, refer to Session Created in NX4.0.0
ErrorInfo	Contains information about an error that occurred Created in NX3.0.0
ErrorList	Represents a list of errors Created in NX3.0.0
Expression	Represents an expression
ExpressionCollection	Represents a collection of expressions
iterator	Iterator for accessing the contents of the collection
ExpressionCollectorSet	An object that binds an expression with an entity section in the context of a list
ExpressionCollectorSetList	Represents a list of objects
ExpressionSectionSet	An object that binds an expression with an entity section in the context of a list
ExpressionSectionSetList	Represents a list of objects
Face	Represents a face Created in NX3.0.0
FaceAdjacentRule	Represents a SelectionIntentRule that collects the faces adjacent to the seed face of a body
FaceAllBlendRule	Represents a SelectionIntentRule that collects all blend faces
FaceAndAdjacentFacesRule	Represents a SelectionIntentRule that collects both the seed face and all its adjacent faces
FaceBodyRule	Represents a SelectionIntentRule that collects all the faces of a body
FaceBossPocketFacesRule	Represents a SelectionIntentRule that collects all faces of a boss or pocket
FaceConnectedBlendRule	Represents a SelectionIntentRule that collects all connected blend faces
FaceDumbRule	Represents a SelectionIntentRule that collects faces without any intent i.e
FaceFeatureRule	Represents a SelectionIntentRule that collects all faces created or modified by a feature
FaceMergedRibFacesRule	Represents a SelectionIntentRule that collects all merged rib faces
FaceRegionBoundaryRule	Represents a SelectionIntentRule that collects a region of faces that are tangent connected
FaceRegionRule	Represents a SelectionIntentRule that collects a region of faces
FaceRibFacesRule	Represents a SelectionIntentRule that collects all rib faces
FaceSlotFacesRule	Represents a SelectionIntentRule that collects all faces of a pocket
FaceTangentRule	Represents a SelectionIntentRule that collects tangent connected faces from the body of the seed face
FeatureGeneralPropertiesBuilder	Represents a FeatureGeneralPropertiesBuilder to be used for modifying the names of features and general objects
FeatureIntersectionEdgesRule	Represents a SelectionIntentRule that collects the intersection edges of boolean like features
FeaturePointsRule	Represents a SelectionIntentRule that collects all points created by a feature
FeatureProcessBuilderStatus	Created in NX7.5.0
FileNew	Represents a FileNew This class is not directly created
FollowFilletRule	Represents a SelectionIntentRule that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet
FontCollection	Represents a collection of typographical fonts (for example, Arial, OldEnglish) To obtain an instance of this class, refer to BasePart Created in NX3.0.0
FourPointSurfaceBuilder	Represents a four point sheet body builder To create a new instance of this class, use BodyCollection::CreateFourPointSurfaceBuilder Created in NX6.0.0
GeneralScalarTable	Represents a General M x N table of scalar (real) values
GenericMeasure	Represents a single valued measurement Created in NX4.0.0
Group	Represents a gateway group To create or edit an instance of this class, use GroupBuilder Created in NX5.0.0
GroupBuilder	Represents a GroupBuilder To create a new instance of this class, use BasePart::CreateGatewayGroupBuilder Default values
HumanData	Represent the data used to create the human Created in NX4.0.0
HumanHandShapeData	Represent hand shape data Created in NX4.0.0
HumanPosturePrediction	Represent posture prediction object To create or edit an instance of this class, use HumanPosturePredictionBuilder Created in NX5.0.0
HumanPosturePredictionBuilder	Represents a Human Posture Prediction Builder
HumanReachZone	Represents a human reach zone
Hyperbola	Represents a hyperbola curve
HyperbolaCollection	Represents a collection of hyperbolas
iterator	Iterator for accessing the contents of the collection
IAttributeSourceObjectBuilder	Represents an interface to perform various database operations on an array of NXObject
IBaseCurve	Represents something containing a two dimensional curve Created in NX4.0.0
IBasePlane	Represents a Plane or Datum Plane Created in NX6.0.0
IBody	Represents something containing a body Created in NX4.0.0
ICurve	Represents something containing a two dimensional modeling curve Created in NX3.0.0
IFitTo	Represents something that can be supplied to View::FitToObjects Created in NX4.0.0
IgesCreator	Represents a IgesCreator to be used when exporting the IGES Data This class is created using DexManager
IgesImporter	Represents a IgesImporter to be used when importing the IGES Data This class is created using DexManager
ILocation	Represents something that can be supplied to an location selection Created in NX4.0.0
Importer	Base class for importing data into the work part
ImportManager	Used to create importer objects
InferredConstraintsBuilder	Represents a InferredConstraintsBuilder To create a new instance of this class, use SketchCollection::CreateInferredConstraintsBuilder Created in NX5.0.0
InferSnapType	Represent options for snap selection
InfiniteLine	Represents a infinite line curve
InfiniteLineCollection	Represents a collection of infinite lines
iterator	Iterator for accessing the contents of the collection
Information	Represents a class that provides methods for displaying information about part history, interpart parents and children, features, points, and other NX Objects
InterpartExpressionsBuilder	This class creates interpart expressions from the source part to the current work part via the naming rule defined
INXObject	Represents an interface from which most NXOpen classes inherit Created in NX3.0.0
IOrientation	Represents something that can be supplied to an orientation selection Created in NX4.0.0
IParameterizedSurface	Represents something containing a face Created in NX4.0.0
IPlane	Represents an Plane class
IProfile	Represents something that can be supplied to a profile Created in NX4.0.0
IReferenceAxis	Represents an object that could be used as a reference axis for a feature Created in NX3.0.0
ISketchHelpedConstraint	Represents a sketch constraint that has a help point or help parameter
ISurface	Represents something containing a two dimensional surface Created in NX3.0.0
JtCreator	Represents a JtCreator to be used when exporting the JT Data This class is created using PvtransManager
KFObject	Represents an KF object in the part
Layout	Represents a layout
LayoutCollection	Represents a collection of layouts
iterator	Iterator for accessing the contents of the collection
LayoutDefinition	Represents the definition of a layout
LicenseManager	Provides utility methods for managing licenses
Light	Represents a light source
LightCollection	Represents a collection of Light s
iterator	Iterator for accessing the contents of the collection
Line	Represents a line curve
LineCollection	Represents a collection of lines
iterator	Iterator for accessing the contents of the collection
LineColorFontWidthBuilder	Represent a LineColorFontWidthBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
LineFontBuilder	Represent a LineFontBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
LineWidthBuilder	Represents a LineWidthBuilder
LinkedMirrorPartAttributeEditData	JA interface for LinkedMirrorPartAttributeEditData object This cannot be created Created in NX8.5.0
LinkedMirrorPartAttributeEditEvent	JA interface for LinkedMirrorPartAttributeEditEvent object This cannot be created Created in NX8.5.0
LinkedMirrorPartBuilder	builder class of LinkedMirrorPartBuilder <br> To create a new instance of this class, use @link PartCollection::CreateLinkedMirrorPartBuilder PartCollection::CreateLinkedMirrorPartBuilder @endlink <br> Default values
LinkedMirrorPartEntityMapData	JA interface for LinkedMirrorPartEntityMapData oject This cannot be created Created in NX8.5.0
LinkedMirrorPartEntityMapEvent	JA interface for LinkedMirrorPartEntityMapEvent object This cannot be created Created in NX8.5.0
LinkedPartManager	Represents the customization interface during linked mirror part creation and update
iterator	Iterator for accessing the contents of the collection
ListCreator	Represents a ListCreator to be used when exporting the JT Data This class is created using PvtransManager
ListCreatorList	Represents a list of objects
ListingWindow	Represents a ListingWindow
LoadOptions	Contains accessor methods for all the part load options
LogFile	Represents the system log file To obtain an instance of this class, refer to Session Created in NX3.0.0
MassPropertiesBuilder	Represents a MassPropertiesBuilder for calculating the weight of selected objects as well as informing the part that the assemblies weight property data needs to be updated on save
Material	Represents Material This is an abstract class Created in NX5.0.0
MaterialManager	A manager to deal with all material objects To obtain an instance of this class, refer to BasePart Created in NX5.0.0
MathUtils	Contains various math utility methods To obtain an instance of this class, refer to Session Created in NX3.0.0
Matrix3x3	Represents a 3 x 3 matrix Created in NX3.0.0
Measure	Represents a measurement feature To create an instance of this use MeasureBodies , MeasureDistance , MeasureAngle , MeasureFaces , and MeasureLength Created in NX4.0.0
MeasureAngle	Represents a single valued Angle measurement To create or edit an instance of this class, use MeasureAngleBuilder Created in NX4.0.0
MeasureAngleBuilder	Represents a MeasureAngleBuilder To create a new instance of this class, use MeasureManager::CreateMeasureAngleBuilder Created in NX5.0.0
MeasureBodies	Represents the measurement specific mass properties for a set of bodies To create or edit an instance of this class, use MeasureFaceBuilder Created in NX4.0.0
MeasureBodyBuilder	Represents a MeasureBodyBuilder To create a new instance of this class, use MeasureManager::CreateMeasureBodyBuilder Created in NX5.0.0
MeasureBuilder	Represents a MeasureBuilder This is an abstract class, and cannot be instantiated
MeasureDistance	Represents a single valued distance measurement To create or edit an instance of this class, use MeasureDistanceBuilder Created in NX4.0.0
MeasureDistanceBuilder	Represents a MeasureDistanceBuilder To create a new instance of this class, use MeasureManager::CreateMeasureDistanceBuilder Created in NX5.0.0
MeasureFaceBuilder	Represents a MeasureFaceBuilder To create a new instance of this class, use MeasureManager::CreateMeasureFaceBuilder Created in NX5.0.0
MeasureFaces	Represents the measurement of perimeter and area of a set of faces To create or edit an instance of this class, use MeasureFaceBuilder Created in NX4.0.0
MeasureLength	Represents a single valued length measurement Created in NX4.0.0
MeasureManager	Provides methods for manipulating the measurement objects in a part To obtain an instance of this class, refer to BasePart Created in NX4.0.0
Measurement	Provides methods for calculating and displaying the measurement information
MeasurePoint	Represents a point measurement Created in NX9.0.0
MeasurePolarAngle	Represents a single valued polar angle measurement Created in NX8.5.0
MeasurePolarArea	Represents a single valued polar area measurement Created in NX8.5.0
MeasurePolarRadius	Represents a single valued polar radius measurement Created in NX8.5.0
MeasureRectangularExtreme	Represents a rectangular extreme point measurement Created in NX8.5.0
MeshParameterData	Represents surface rebuild data structure
MeshProfileString	Represents Mesh profile string To create a new instance of this class, use Features::MeshSurfaceBuilder::NewProfile Created in NX4.0.0
ModelingView	Represents a Modeling View Modeling Views may only be created by Save As
OtherSectionAttrT	This defines the attributes data for dynamic sectioning
ModelingViewCollection	Represents a collection of ModelingView s
iterator	Iterator for accessing the contents of the collection
ModelingViewHighQualityImage	Represents the properties and methods for generating a High Quality Image of a Modeling View To obtain an instance of this class, refer to ModelingView Created in NX4.0.0
MovieManager	Represents a MovieManager class
MovieSettingsBuilder	This class is the builder for the Movie Settings
MWUpdate	Update tools used in Mold Wizard for the Journamation layer Created in NX5.0.0
NavigatorFilter	Represents a NavigatorFilter object
NonFeatureSmartContainer	Represents a Non Feature Smart Container To create or edit an instance of this class, use Features::FeatureBuilder Created in NX9.0.0
NXColor	Represents a standard NX color
Rgb	RGB values
NXException	A base class for exceptions thrown by NXOpen methods
NXMatrix	Represents an NX matrix
NXMatrixCollection	Represents a collection of NX Matrixes
iterator	Iterator for accessing the contents of the collection
NXMessageBox	Displays message box
NXObject	A base class providing low-level services for most NXOpen classes
AttributeInformation	Contains attribute information
ComputationalTime	Holds the computational time value of a time attribute
NXObjectList	Represents a list of objects
NXObjectManager	Maintains a mapping between Tags and objects
NXString	An internationalized NX text string
NXTo2dCreator	Represents a NXTo2dCreator to be used when exporting the 2D Data This class is created using DexManager
ObjectGeneralPropertiesBuilder	Represents an ObjectGeneralPropertiesBuilder to be used for modifying the names and properties of objects
ObjectList	Represents a list of objects
ObjectSelector	Represents a ObjectSelector to be used when exporting the the selected objects from NX part.This class is created using DexManager
ObjectTypeSelector	Represents a ObjectTypeSelector to be used when filter out the objects based on the type during import/export
Offset	Represents a Offset
OffsetCollection	Represents a collection of Offset
iterator	Iterator for accessing the contents of the collection
OuterEdgesOfFacesRule	Represents a SelectionIntentRule that collects the outer edges of a group of faces
Parabola	Represents a parabola curve
ParabolaCollection	Represents a collection of Parabolas To obtain an instance of this class, refer to BasePart Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
Part	Represents an NX part of type .prt
FeatureUpdateStatus	Contains feature update status report
PartFamilyAttributeData	Contains part family attributes information
PartCleanup	Provides utilities to to eliminate certain inaccessible objects from the part file
PartCloseResponses	Manages a list of part name/response pairs which are used to determine whether a part should be closed if modified during part close
PartCloseStatus	This class represents a list of part names with associated status codes that serve to communicate why these parts were not able to be closed
PartCollection	Represents the collection of all parts in a session
iterator	Iterator for accessing the contents of the collection
PartDelayedUpdateStatus	Represents a list of part names with associated delay status codes
DelayStatusInfo	Logical structure of part delayed update status
PartFamilyManager	This class represents part family Use Part::GetPartFamilyManager to get the instance of this class
PartFamilyMemberData	This class is responsible for storing part family member data Use the method Part::NewPartFamilyMemberData to create new instance of this class
PartFamilyMemberValues	This class is responsible for storing part family member attribute values
PartImporter	Used to import a part into the work part
PartLoadStatus	Represents a list of part names with associated status codes
PartReopenReport	Contains information about a part and its components after it has been reopened
PartReopenStatus	Contains information about a part after an attempt was made to reopen it
PartSaveOptions	Contains accessor methods for all part save options that follow the part
PartSaveStatus	This class represents a list of part names with associated status codes that serve to communicate why these parts where not able to be saved during part save
PasteSpecialBuilder	Represents a PasteSpecialBuilder To create a new instance of this class, use ClipboardOperationsManager::CreatePasteSpecialBuilder Default values
PhysicalMaterial	Represents Physical Material Created in NX5.0.0
PhysicalMaterialBuilder	Represents a PhysicalMaterial builder To create a new instance of this class, use PhysicalMaterialCollection::CreatePhysicalMaterialBuilder Created in NX6.0.0
PhysicalMaterialCollection	Represents the collection of all PhysicalMaterial objects in this Part
iterator	Iterator for accessing the contents of the collection
Plane	Represents an Plane class
PlaneCollection	Represents a collection of Plane
iterator	Iterator for accessing the contents of the collection
PlaneList	Represents a list of objects
PlaneTypes	Represents an PlaneTypes class
PlmObjectNode	This class contains the factory methods for creating a PlmObjectNode
PlotBuilder	Represents a PlotBuilder
PlotColorsWidthsBuilder	Represents a PlotColorsWidthsBuilder to be used for plotting
PlotManager	Methods to create Gateway Builder objects
PlotSourceBuilder	Represents a PlotSourceBuilder
Point	Represents a smart Point
Point2d	Represents two-dimensional cartesian coordinates for a point Created in NX6.0.0
Point3d	Represents three-dimensional cartesian coordinates for a point Created in NX3.0.0
Point4d	Represents four-dimensional homogeneous coordinates for a point
PointCollection	Represents a collection of smart Point
iterator	Iterator for accessing the contents of the collection
PointList	Represents a list of objects
PositioningDimension	Represents a dimension object attached to the feature Intances of this object cannot be directly be created
PreviewPropertiesBuilder	Represents a PreviewPropertiesBuilder to be used for creating and storing previews
PrintBuilder	Represents a PrintBuilder
PrintPDFBuilder	Represents a PrintPDFBuilder to be used when exporting the Current Display or selected sheets to a PDF document
ProeImporter	Represents a ProeImporter to be used when importing the ProE Data This class is created using DexManager
PropertiesManager	Methods to create Gateway Properties Builder objects
PropertyContainer	Represents a list of properties
PvtransManager	Methods to create Pvtrans Builder objects
ReferenceSet	Represents a ReferenceSet This is no KF creation Created in NX6.0.0
RegionBoundaryRule	Represents a SelectionIntentRule that collects curves as specified by an enclosed region
RegionPoint	Represents a point and body context on a region point
RegionPointList	Represents a list of objects
RemoteUtilities	This class is primarily designed for use in a remote session, and allows client applications to access resources on a remote server
RibTopFaceEdgesRule	Represents a SelectionIntentRule that collects the like convexity outer edges of a group of faces
RoutingObjectValidationBuilder	Builder class for RoutingObjectValidation dialog
RuleManager	Provides methods for manipulating the Knowledge Fusion rules in a part
AdoptableTypes	Used to return adoptable object types
DebugInstance	Used to return debug update information for instances
DebugRule	Used to return debug update information for rules
FunctionArgumentsInformation	Used to return information about the arguments for a function
FunctionInformation	Used to return information about a function
ParameterRule	Used to specify parameter values for child rule creation or modification
SaveOptions	Contains accessor methods for all part save options that follow the session
Scalar	Represents a scalar
ScalarCollection	Represents a collection of scalars
iterator	Iterator for accessing the contents of the collection
ScalarMatrixValue	Represents a General M x N matrix of scalar (real) values
ScalarTableValue	Represents a General M x N table of scalar (real) values
ScCollector	Sc Collector To create a new instance of this class, use ScCollectorCollection::CreateCollector Created in NX4.0.0
ScCollectorCollection	This class contains the factory methods for creating a sc collector
iterator	Iterator for accessing the contents of the collection
ScCollectorList	Represents a list of objects
ScRuleFactory	This class contains the factory methods for creating selection intent rules To obtain an instance of this class, refer to Part Created in NX3.0.0
Section	Represents a section Section consists of "chained_entity", a chain or a single entity of edge or curve
SectionCollection	This class contains the factory methods for creating a section
iterator	Iterator for accessing the contents of the collection
SectionData	Represents section data Created in NX3.0.0
SectionElementData	Represents section element data Created in NX3.0.0
SectionList	Represents a list of objects
SelectBody	Represents a single object selection
SelectBodyList	Represents a list of objects on a selection list
SelectCartesianCoordinateSystem	Represents a single object selection
SelectCoordinateSystem	Represents a single object selection
SelectCoordinateSystemList	Represents a list of objects on a selection list
SelectCurve	Represents a single object selection
SelectCurveList	Represents a list of objects on a selection list
SelectDatumPlane	Represents a single object selection
SelectDatumPlaneList	Represents a list of objects on a selection list
SelectDisplayableObject	Represents a single object selection
SelectDisplayableObjectList	Represents a list of objects on a selection list
SelectEdge	Represents a single object selection
SelectEdgeList	Represents a list of objects on a selection list
SelectExpressionList	Represents a list of objects on a selection list
SelectFace	Represents a single object selection
SelectFaceList	Represents a list of objects on a selection list
SelectGroup	Represents a single object selection
SelectIBaseCurve	Represents a single object selection
SelectIBaseCurveList	Represents a list of objects on a selection list
SelectIBasePlaneList	Represents a list of objects on a selection list
SelectICurve	Represents a single object selection
SelectICurveList	Represents a list of objects on a selection list
Selection	Defines an interface object for executing selection operations To obtain an instance of this class, refer to UI Created in NX3.0.0
MaskTriple	Used in selection methods to set the types of objects that are selectable
SelectionDescriptor	For a rectangle deselection, the fields Deselection , MultipleSelection , Rectangle bits would be set
SelectionHandle	Represents a SelectionHandle for UI Styler Created in NX5.0.0
SelectionIntentRule	Represents a @link SelectionIntentRule SelectionIntentRule @endlink which essentially provides capabilities to collect curves, edges, faces and bodies
SelectionMethod	Represents the output from a smart selector method This is an abstract class, and cannot be created
SelectIParameterizedSurface	Represents a single object selection
SelectIParameterizedSurfaceList	Represents a list of objects on a selection list
SelectIReferenceAxis	Represents a single object selection
SelectISurface	Represents a single object selection
SelectLine	Represents a single object selection
SelectNXObject	Represents a single object selection
SelectNXObjectList	Represents a list of objects on a selection list
SelectObject	Represents a single object selection
SelectObjectList	Represents a list of objects on a selection list
SelectPart	Represents a single object selection
SelectPartList	Represents a list of objects on a selection list
SelectPoint	Represents a single object selection
SelectPointList	Represents a list of objects on a selection list
SelectSketch	Represents a single object selection
SelectSmartObject	Represents a single object selection
SelectSpline	Represents a single object selection
SelectSplineList	Represents a list of objects on a selection list
SelectTaggedObject	Represents a single object selection
SelectTaggedObjectList	Represents a list of objects on a selection list
SelectView	Represents a single object selection
Session	Represents the NX session Created in NX3.0.0
UndoMarkData	This structure contains data about an undo mark
SingleMeasure	Represents a single valued measurement Created in NX4.0.0
Sketch	Represents a sketch Use the SketchCollection class to create a sketch
ConstraintGeometry	Used by the create geometric constraint methods to indicate what geometry the constraint should be applied to
ConstraintGeometryHelp	Used by several constraint creation methods that need a help point or parameter to indicate how to create the constraint
CopyObjectData	This structure represents a map between the original object to be copied and the corresponding copied object
DimensionGeometry	Used in the dimension creation methods to indicate what geometry to create the dimension on
SketchAlongPathBuilder	Use the SketchAlongPathBuilder to create or reattach a Sketch along a path
SketchAngularDimensionBuilder	Represents a SketchAngularDimensionBuilder To create a new instance of this class, use SketchCollection::CreateAngularDimensionBuilder Created in NX9.0.0
SketchAssociativeTrim	Represents a sketch associative trim constraint Use SketchCollection::CreateSketchAssociativeTrimBuilder to create an instance of this class
SketchAssociativeTrimBuilder	Represents a @link SketchAssociativeTrimBuilder SketchAssociativeTrimBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateSketchAssociativeTrimBuilder SketchCollection::CreateSketchAssociativeTrimBuilder @endlink <br> Default values
SketchAutoConstrainBuilder	Represents a SketchAutoConstrainBuilder To create a new instance of this class, use SketchCollection::CreateAutoConstrainBuilder Default values
SketchAutoDimensionBuilder	Represents a SketchAutoDimensionBuilder To create a new instance of this class, use SketchCollection::CreateAutoDimensionBuilder Default values
SketchChamferBuilder	Represents a Chamfer builder <br> To create a new instance of this class, use @link SketchCollection::CreateSketchChamferBuilder SketchCollection::CreateSketchChamferBuilder @endlink <br> Default values
SketchCollection	Represents a collection of sketches To obtain an instance of this class, refer to Part Created in NX3.0.0
iterator	Iterator for accessing the contents of the collection
SketchConicBuilder	Represents a SketchConicBuilder builder To create a new instance of this class, use SketchCollection::CreateSketchConicBuilder Default values
SketchConstraint	Represents a constraint in a sketch
SketchConstraintBuilder	Represents a SketchConstraint builder To create a new instance of this class, use SketchCollection::CreateConstraintBuilder Created in NX8.5.0
SketchCornerBuilder	Create a corner between two sketch curves
SketchDimensionalConstraint	Represents a dimensional constraint To create an instance of this class refer to Sketch Created in NX3.0.0
SketchDimensionBuilder	Edit the geometry references of an existing sketch dimension
SketchEditDefiningSectionBuilder	Represents a SketchEditDefiningSectionBuilder builder
SketchEllipseBuilder	Represents a SketchEllipseBuilder builder To create a new instance of this class, use SketchCollection::CreateSketchEllipseBuilder Default values
SketchEvaluator	Represents a sketch-on-path evaluator
SketchEvaluatorCollection	Represents a collection of SketchEvaluator
iterator	Iterator for accessing the contents of the collection
SketchExpressionModifierBuilder	Represents a Sketch Expression Modifier Builder
SketchGeometricConstraint	Represents a geometric sketch constraint To create an instance of this class refer to Sketch Created in NX3.0.0
SketchHelpedDimensionalConstraint	Represents a dimensional sketch constraint that has a help point or help parameter Created in NX3.0.0
SketchHelpedGeometricConstraint	Represents a geometric sketch constraint that has a help point or help parameter To obtain an instance of this class, use Sketch Created in NX3.0.0
SketchInDraftingBuilder	Use the SketchInDraftingBuilder to create a Sketch on a Drawings::DraftingView or Drawings::DrawingSheet
SketchInPlaceBuilder	Use the SketchInPlaceBuilder to create or reattach a Sketch on a DatumPlane or planar Face
SketchIntersectionCurve	Represents a Intersection Curve operation inside sketch To create an instance of this object use SketchIntersectionCurveBuilder Created in NX5.0.0
SketchIntersectionCurveBuilder	Represents a SketchIntersectionCurve builder To obtain an instance of this class use SketchCollection::CreateIntersectionCurveBuilder
SketchIntersectionPoint	Represents an Intersection Point operation inside sketch To create an instance of this object use SketchIntersectionPointBuilder Created in NX5.0.0
SketchIntersectionPointBuilder	Represents a SketchIntersectionPoint builder To obtain an instance of this class use SketchCollection::CreateIntersectionPointBuilder
SketchLinearDimensionBuilder	Represents a SketchLinearDimensionBuilder To create a new instance of this class, use SketchCollection::CreateLinearDimensionBuilder Created in NX9.0.0
SketchMakeSymmetricBuilder	This class is used to add symmetric contraint to objects from a SketchMakeSymmetricBuilder
SketchMirrorBuilder	This class is used to create a set of mirrored curves from a SketchMirrorBuilder
SketchMirrorPatternBuilder	Represents a @link SketchMirrorPatternBuilder SketchMirrorPatternBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateSketchMirrorPatternBuilder SketchCollection::CreateSketchMirrorPatternBuilder @endlink <br> Default values
SketchOffset	Represents a sketch offset constraint Use SketchCollection::CreateSketchOffsetBuilder to create an instance of this class
SketchOffsetBuilder	Represents a @link SketchOffsetBuilder SketchOffsetBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateSketchOffsetBuilder SketchCollection::CreateSketchOffsetBuilder @endlink <br> Default values
SketchPasteBuilder	Represents a @link SketchPasteBuilder SketchPasteBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateSketchPasteBuilder SketchCollection::CreateSketchPasteBuilder @endlink <br> Default values
SketchPattern	Represents a sketch pattern constraint Use SketchCollection::CreateSketchPatternBuilder to create an instance of this class
SketchPatternBuilder	Represents a @link SketchPatternBuilder SketchPatternBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateSketchPatternBuilder SketchCollection::CreateSketchPatternBuilder @endlink <br> Default values
SketchPolygon	Represents a polygon constraint in a sketch To create or edit an instance of this class, use SketchPolygonBuilder Created in NX7.5.0
SketchPolygonBuilder	Represents a @link SketchPolygon SketchPolygon@endlink builder <br> To create a new instance of this class, use @link SketchCollection::CreateSketchPolygonBuilder SketchCollection::CreateSketchPolygonBuilder @endlink <br> Default values
SketchProjectBuilder	Represents a SketchProjectBuilder builder To create a new instance of this class, use SketchCollection::CreateProjectBuilder Default values
SketchQuickExtendBuilder	Represents a @link SketchQuickExtendBuilder SketchQuickExtendBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateQuickExtendBuilder SketchCollection::CreateQuickExtendBuilder @endlink <br> Default values
SketchQuickTrimBuilder	Represents a @link SketchQuickTrimBuilder SketchQuickTrimBuilder@endlink <br> To create a new instance of this class, use @link SketchCollection::CreateQuickTrimBuilder SketchCollection::CreateQuickTrimBuilder @endlink <br> Default values
SketchRadialDimensionBuilder	Represents a SketchRadialDimensionBuilder To create a new instance of this class, use SketchCollection::CreateRadialDimensionBuilder Created in NX9.0.0
SketchRapidDimensionBuilder	Represents a SketchRapidDimensionBuilder To create a new instance of this class, use SketchCollection::CreateRapidDimensionBuilder Created in NX9.0.0
SketchTangentConstraint	Represents a tangent constraint To create an instance of this object use Sketch::CreateTangentConstraint Created in NX3.0.0
SmartObject	Represents a smart object
SphericalCoordinateSystem	Represents a cylindrical coordinate system To create a new instance of this class, use CoordinateSystemCollection::CreateSphericalCoordinateSystem Created in NX4.0.0
Spline	Represents a spline curve
SplineCollection	Represents a collection of splines
iterator	Iterator for accessing the contents of the collection
Step203Creator	Represents a Step203Creator to be used when exporting the STEP203 Data This class is created using DexManager
Step203Importer	Represents a Step203Importer to be used when importing the STEP203 Data This class is created using DexManager
Step214Creator	Represents a Step214Creator to be used when exporting the STEP214 Data This class is created using DexManager
Step214Importer	Represents a Step214Importer to be used when importing the STEP214 Data This class is created using DexManager
STLImporter	Used to import an STL file into the work part
SubdivisionMeshBody	Represents a subdivision mesh
SubdivisionMeshEdge	Represents a subdivision mesh edge
SubdivisionMeshFace	Represents a subdivision mesh face
SubdivisionMeshVertex	Represents a subdivision mesh vertex
SubdivisionTaskEnvironment	Represents the subdivision task environment associated with a session
SuppressByExpressionBuilder	Represents a @link SuppressByExpressionBuilder SuppressByExpressionBuilder@endlink <br> To create a new instance of this class, use @link ExpressionCollection::CreateSuppressByExpressionBuilder ExpressionCollection::CreateSuppressByExpressionBuilder @endlink <br> Default values
SurfaceRebuildData	Represents surface rebuild data structure
SurfaceUVDirectionBuilder	Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions
SymbolFont	Represents a symbol font This class cannot be created, but an instance can be obtained from Annotations::AnnotationManager::LoadSymbolFontFromSbfFile
TaggedObject	An object that has a Tag
TaggedObjectCollection	A base class for all NXOpen tagged object collections
TaggedObjectList	Represents a list of objects
TextColorFontWidthBuilder	Represent a TextColorFontWidthBuilder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0
Traceline	Represents a traceline
TracelineCollection	Represents a collection of tracelines To obtain an instance of this class, refer to Part Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
TransientObject	An NX transient object
TreeListNode	Represents a TreeList Node Object Created in NX6.0.4
UI	This class contains the various elements that represent the NX User Interface
Unit	Represents a unit To obtain an instance of this class use UnitCollection Created in NX4.0.0
UnitCollection	Provides methods for manipulating the units in a part To obtain an instance of this class, refer to BasePart Created in NX4.0.0
iterator	Iterator for accessing the contents of the collection
Update	Provides methods for update and delete
Validation	Represents an NX Validation object
ValidationCollection	Represents a collection of Validation
iterator	Iterator for accessing the contents of the collection
ValidationDraftingEdgeVDCurveCollectionValidator	Validator for all drafting edge vdcurves in a part This is a test class
ValidationDraftingInterferenceVDCurveCollectionValidator	Validator for all drafting interference vdcurve in a part This is a test class
ValidationDraftingSectionEdgeVDCurveCollectionValidator	Validator for all drafting section edge vdcurves in a part This is a test class
ValidationDraftingSilhouetteVDCurveCollectionValidator	Validator for all drafting silhouette vdcurves in a part This is a test class
ValidationDraftingSimplifiedVDCurveCollectionValidator	Validator for all drafting simplified curves in a part This is a test class
ValidationDraftingThreadVDCurveCollectionValidator	Validator for all drafting thread(thread silhouette and thread section edge) vdcurves in a part This is a test class
ValidationDraftingTraceLineVDCurveCollectionValidator	Validator for all drafting traceline vdcurves in a part This is a test class
ValidationDraftingUVHatchVDCurveCollectionValidator	Validator for all drafting uvhatch vdcurve in a part This is a test class
ValidationDraftingVIVDCurveCollectionValidator	Validator for all drafting vi vdcurves in a part This is a test class
ValidationExtractedEdgeCollectionValidator	Validator for all drafting extracted edges in a part This is a test class
ValidationHoleTableValidator	Validator for a Hole Table This is a test class
ValidationInterferenceCurveCollectionValidator	Validator for all drafting interference curves in a part This is a test class
ValidationPMIPlanarCPSValidator	Validator for a PMI Cutting Plate This is a test class
ValidationSilhouetteCurveCollectionValidator	Validator for all drafting silhouette curves in a part This is a test class
ValidationSimplifiedCurveCollectionValidator	Validator for all drafting simplified curves in a part This is a test class
ValidationTraceLineCollectionValidator	Validator for all drafting traceline curves in a part This is a test class
ValidationUVHatchCurveCollectionValidator	Validator for all drafting uvhatch curve in a part This is a test class
Vector3d	Represents a three-dimensional vector Created in NX3.0.0
View	Represents a view
ViewCollection	Represents a collection of View s
iterator	Iterator for accessing the contents of the collection
ViewDependentDisplayManager	Represents all view dependent display operations To obtain an instance of this class, refer to View Created in NX5.0.0
VRMLImporter	Used to import a VRML file into the work part
WCS	Represents the World Coordinate System
WidthDefinition	Represents a WidthDefinition , which is a representation of an NX width palette
Xform	Represents a smart xform To create a new instance of this class, use XformCollection::CreateXform Created in NX3.0.0
XformCollection	Represents a collection of smart xforms
iterator	Iterator for accessing the contents of the collection
ValidationAnnotationValidator
ValidationCurveCollectionValidator