Represents a CAM::NcmPlanarBuilder. More...

Inheritance diagram for NXOpen::CAM::NcmPlanarBuilder:

Public Types
enum	CutcomTypes { CutcomTypesNone, CutcomTypesAllFinishPasses, CutcomTypesFinalFinishPass }
	Available types for cutter compensation in planar milling. More...

enum	FinalRet { FinalRetInherit, FinalRetPlunge, FinalRetNone }
	Available strategies for final retract in planar milling. More...

enum	FinalTypes { FinalTypesClearance, FinalTypesDistance, FinalTypesNone, FinalTypesShortestDistanceToClearance, FinalTypesCutPlaneToClearance }
	Available types for final clearance in planar milling. More...

enum	InitialEng { InitialEngInherit, InitialEngLift, InitialEngNone }
	Available strategies for initial engage in planar milling. More...

enum	InitialTypes { InitialTypesClearance, InitialTypesDistance, InitialTypesNone, InitialTypesBlankPlane, InitialTypesShortestDistanceToClearance, InitialTypesCutPlaneToClearance }
	Available types for initial clearance in planar milling. More...

enum	PredrillPointsOutputOptions { PredrillPointsOutputOptionsNone, PredrillPointsOutputOptionsAllRegions, PredrillPointsOutputOptionsBottomRegions }
	Available options for output of pre-drill points in planar milling. More...

enum	TransferBetweenLevelsTypes { TransferBetweenLevelsTypesPrevPlane, TransferBetweenLevelsTypesDirect, TransferBetweenLevelsTypesClearance }
	Available types for transfer between levels in planar milling. More...

enum	TransferBetweenRegionsTypes { TransferBetweenRegionsTypesClearance, TransferBetweenRegionsTypesPrevPlane, TransferBetweenRegionsTypesDirect, TransferBetweenRegionsTypesLowestSafeZ, TransferBetweenRegionsTypesBlankPlane, TransferBetweenRegionsTypesShortestToClearance, TransferBetweenRegionsTypesCutPlaneToClearance }
	Available types for transfer between regions in planar milling. More...

enum	TransferWithinLevelsTypes { TransferWithinLevelsTypesLowestSafeZ, TransferWithinLevelsTypesPrevPlane, TransferWithinLevelsTypesDirect, TransferWithinLevelsTypesClearance, TransferWithinLevelsTypesBlankPlane, TransferWithinLevelsTypesShortestToClearance, TransferWithinLevelsTypesCutPlaneToClearance }
	Available types for transfer within levels in planar milling. More...

enum	TransferWithinLevelsWiths { TransferWithinLevelsWithsUseEngret, TransferWithinLevelsWithsFollowBoundary, TransferWithinLevelsWithsLiftPlunge, TransferWithinLevelsWithsNone }
	Available strategies for transfer within levels in planar milling. More...

Public Types inherited from NXOpen::CAM::NcmSubopBuilder
enum	DefaultRegionStartTypes { DefaultRegionStartTypesMidPoint, DefaultRegionStartTypesCorner }
	Available types for default region start in subop milling. More...

Public Member Functions
NXOpen::CAM::NcmClearanceBuilder *	ClearanceBuilder ()
	Returns the clearance builder (inheritable tool dep) Created in NX5.0.0.

bool	CollisionCheck ()
	Returns the collision check activation Created in NX5.0.0.

double	CutcomMinimumAngle ()
	Returns the cutter compensation minimum angle Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	CutcomMinimumMoveBuilder ()
	Returns the cutter compensation minimum move builder (inheritable tool dep) Created in NX5.0.0.

bool	CutcomOutputContactPoint ()
	Returns the cutter compensation output contact point status Created in NX5.0.0.

bool	CutcomOutputPlane ()
	Returns the cutter compensation output plane status Created in NX5.0.0.

int	CutcomTrackingPointType ()
	Returns the cutter compensation tracking point selection Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::CutcomTypes	CutcomType ()
	Returns the cutter compensation type Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	EngageClosedAreaBuilder ()
	Returns the default engage closed area builder Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	EngageInitialClosedBuilder ()
	Returns the initial engage closed area builder Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	EngageInitialOpenBuilder ()
	Returns the initial engage open area builder Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	EngageOpenAreaBuilder ()
	Returns the default engage open area builder Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	FinalSafeDistanceBuilder ()
	Returns the final safe distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::FinalTypes	FinalType ()
	Returns the final type Created in NX5.0.0.

std::vector< NXOpen::Point * >	GetPredrillPoints ()
	The pre-drill points.

NXOpen::CAM::InheritableToolDepBuilder *	InitialSafeDistanceBuilder ()
	Returns the initial safe distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::InitialTypes	InitialType ()
	Returns the initial type Created in NX5.0.0.

bool	LimitEngRetToCutRegion ()
	Returns the flag to control limitation of engage and retract motions to cut regions Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	OverlapDistanceBuilder ()
	Returns the start/drill points overlap distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	PredrillPointsEffectDistBuilder ()
	Returns the pre-drill points effective distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutputOptions	PredrillPointsOutput ()
	Returns the pre-drill points output option Created in NX5.0.0.

bool	PredrillPointsUseEffectDist ()
	Returns the pre-drill points use effective distance Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	RetractAreaBuilder ()
	Returns the retract area builder Created in NX5.0.0.

NXOpen::CAM::NcmPlanarEngRetBuilder *	RetractFinalBuilder ()
	Returns the final retract builder Created in NX5.0.0.

void	SetCollisionCheck (bool newValue)
	Sets the collision check activation Created in NX5.0.0.

void	SetCutcomMinimumAngle (double minimumAngle)
	Sets the cutter compensation minimum angle Created in NX5.0.0.

void	SetCutcomOutputContactPoint (bool newValue)
	Sets the cutter compensation output contact point status Created in NX5.0.0.

void	SetCutcomOutputPlane (bool outputPlane)
	Sets the cutter compensation output plane status Created in NX5.0.0.

void	SetCutcomTrackingPointType (int newValue)
	Sets the cutter compensation tracking point selection Created in NX5.0.0.

void	SetCutcomType (NXOpen::CAM::NcmPlanarBuilder::CutcomTypes cutcomType)
	Sets the cutter compensation type Created in NX5.0.0.

void	SetFinalType (NXOpen::CAM::NcmPlanarBuilder::FinalTypes finalType)
	Sets the final type Created in NX5.0.0.

void	SetInitialType (NXOpen::CAM::NcmPlanarBuilder::InitialTypes initialType)
	Sets the initial type Created in NX5.0.0.

void	SetLimitEngRetToCutRegion (bool newValue)
	Sets the flag to control limitation of engage and retract motions to cut regions Created in NX5.0.0.

void	SetPredrillPoints (const std::vector< NXOpen::Point * > &predrillPoints)
	The pre-drill points Created in NX5.0.0.

void	SetPredrillPointsOutput (NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutputOptions newValue)
	Sets the pre-drill points output option Created in NX5.0.0.

void	SetPredrillPointsUseEffectDist (bool newValue)
	Sets the pre-drill points use effective distance Created in NX5.0.0.

void	SetSuppressCutcom (bool suppressCutcom)
	Sets the suppress cutter compensation Created in NX6.0.0.

void	SetTransferBetweenLevelsType (NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsTypes transferType)
	Sets the transfer between levels type Created in NX5.0.0.

void	SetTransferBetweenRegionsType (NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsTypes transferType)
	Sets the transfer between regions type

void	SetTransferWithinLevelsType (NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsTypes transferType)
	Sets the transfer within levels type Created in NX5.0.0.

void	SetTransferWithinLevelsWith (NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWiths newValue)
	Sets the transfer within levels strategy Created in NX5.0.0.

bool	SuppressCutcom ()
	Returns the suppress cutter compensation Created in NX6.0.0.

NXOpen::CAM::NcmAvoidancePointBuilder *	TransferAvoidanceFromBuilder ()
	Returns the from point builder Created in NX5.0.0.

NXOpen::CAM::NcmAvoidancePointBuilder *	TransferAvoidanceGohomeBuilder ()
	Returns the gohome point builder Created in NX5.0.0.

NXOpen::CAM::NcmAvoidancePointBuilder *	TransferAvoidanceReturnBuilder ()
	Returns the return point builder Created in NX5.0.0.

NXOpen::CAM::NcmAvoidancePointBuilder *	TransferAvoidanceStartBuilder ()
	Returns the start point builder Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	TransferBetweenLevelsSafeDistanceBuilder ()
	Returns the transfer between levels safe distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsTypes	TransferBetweenLevelsType ()
	Returns the transfer between levels type Created in NX5.0.0.

NXOpen::CAM::NcmTransfer *	TransferBetweenRegionsBuilder ()
	Returns the Transfer Between Regions builder Created in NX9.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	TransferBetweenRegionsSafeDistanceBuilder ()
	Returns the transfer between regions safe distance builder (inheritable tool dep)

NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsTypes	TransferBetweenRegionsType ()
	Returns the transfer between regions type

NXOpen::CAM::InheritableToolDepBuilder *	TransferWithinLevelsHeightBuilder ()
	Returns the transfer within levels height builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	TransferWithinLevelsMaxFollowDistanceBuilder ()
	Returns the transfer within levels max follow distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	TransferWithinLevelsSafeDistanceBuilder ()
	Returns the transfer within levels safe distance builder (inheritable tool dep) Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsTypes	TransferWithinLevelsType ()
	Returns the transfer within levels type Created in NX5.0.0.

NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWiths	TransferWithinLevelsWith ()
	Returns the transfer within levels strategy Created in NX5.0.0.

Public Member Functions inherited from NXOpen::CAM::NcmSubopBuilder
NXOpen::CAM::NcmSubopBuilder::DefaultRegionStartTypes	DefaultRegionStartType ()
	Returns the region start type Created in NX8.5.0.

void	GetRegionStartPoints (std::vector< NXOpen::Point * > &regionStartPoints)
	Returns region start points Created in NX8.5.0.

void	SetDefaultRegionStartType (NXOpen::CAM::NcmSubopBuilder::DefaultRegionStartTypes defaultRegionStartType)
	Sets the region start type Created in NX8.5.0.

void	SetRegionStartPoints (const std::vector< NXOpen::Point * > &regionStartPoints)
	Sets region start points Created in NX8.5.0.

void	SetStartPointsUseEffectDist (bool newValue)
	Sets the start points use effective distance Created in NX8.5.0.

NXOpen::CAM::InheritableToolDepBuilder *	StartPointsEffectDistBuilder ()
	Returns the region start points effective distance builder (inheritable tool dep) Created in NX8.5.0.

bool	StartPointsUseEffectDist ()
	Returns the start points use effective distance Created in NX8.5.0.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a CAM::NcmPlanarBuilder.

Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::NcmPlanarBuilder::CutcomTypes

Available types for cutter compensation in planar milling.

Enumerator:

CutcomTypesNone	cutter compensation off
CutcomTypesAllFinishPasses	cutter compensation on all finish passes
CutcomTypesFinalFinishPass	cutter compensation on last finish pass

enum NXOpen::CAM::NcmPlanarBuilder::FinalRet

Available strategies for final retract in planar milling.

Enumerator:

FinalRetInherit	Use retract defs.
FinalRetPlunge	plunge
FinalRetNone	none

enum NXOpen::CAM::NcmPlanarBuilder::FinalTypes

Available types for final clearance in planar milling.

Enumerator:

FinalTypesClearance	tool axis clearance
FinalTypesDistance	distance
FinalTypesNone	none
FinalTypesShortestDistanceToClearance	shortest distance to clearance
FinalTypesCutPlaneToClearance	cut plane to clearance

enum NXOpen::CAM::NcmPlanarBuilder::InitialEng

Available strategies for initial engage in planar milling.

Enumerator:

InitialEngInherit	Use engage defs.
InitialEngLift	lift
InitialEngNone	none

enum NXOpen::CAM::NcmPlanarBuilder::InitialTypes

Available types for initial clearance in planar milling.

Enumerator:

InitialTypesClearance	tool axis to clearance
InitialTypesDistance	distance
InitialTypesNone	none
InitialTypesBlankPlane	blank plane
InitialTypesShortestDistanceToClearance	shortest distance to clearance
InitialTypesCutPlaneToClearance	cut plane to clearance

enum NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutputOptions

Available options for output of pre-drill points in planar milling.

Enumerator:

PredrillPointsOutputOptionsNone	No Pre-Drill points.
PredrillPointsOutputOptionsAllRegions	Pre-Drill Points for all regions.
PredrillPointsOutputOptionsBottomRegions	Pre-Drill Points for bottom regions only.

enum NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsTypes

Available types for transfer between levels in planar milling.

Enumerator:

TransferBetweenLevelsTypesPrevPlane	previous plane
TransferBetweenLevelsTypesDirect	direct
TransferBetweenLevelsTypesClearance	clearance

enum NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsTypes

Available types for transfer between regions in planar milling.

Enumerator:

TransferBetweenRegionsTypesClearance	tool axis to clearance
TransferBetweenRegionsTypesPrevPlane	previous plane
TransferBetweenRegionsTypesDirect	direct
TransferBetweenRegionsTypesLowestSafeZ	lowest safe z
TransferBetweenRegionsTypesBlankPlane	Blank Plane.
TransferBetweenRegionsTypesShortestToClearance	shortest to clearance
TransferBetweenRegionsTypesCutPlaneToClearance	cut plane to clearance

enum NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsTypes

Available types for transfer within levels in planar milling.

Enumerator:

TransferWithinLevelsTypesLowestSafeZ	lowest Safe Z
TransferWithinLevelsTypesPrevPlane	previous plane
TransferWithinLevelsTypesDirect	direct
TransferWithinLevelsTypesClearance	tool axis to clearance
TransferWithinLevelsTypesBlankPlane	Blank Plane.
TransferWithinLevelsTypesShortestToClearance	shortest to clearance
TransferWithinLevelsTypesCutPlaneToClearance	cut plane to clearance

enum NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWiths

Available strategies for transfer within levels in planar milling.

Enumerator:

TransferWithinLevelsWithsUseEngret	Use engage and retract defs.
TransferWithinLevelsWithsFollowBoundary	follow boundary (for future use)
TransferWithinLevelsWithsLiftPlunge	lift and plunge
TransferWithinLevelsWithsNone	none

Member Function Documentation

NXOpen::CAM::NcmClearanceBuilder* NXOpen::CAM::NcmPlanarBuilder::ClearanceBuilder ( )

Returns the clearance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::NcmPlanarBuilder::CollisionCheck ( )

Returns the collision check activation
Created in NX5.0.0.

License requirements : None

double NXOpen::CAM::NcmPlanarBuilder::CutcomMinimumAngle ( )

Returns the cutter compensation minimum angle
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::CutcomMinimumMoveBuilder ( )

Returns the cutter compensation minimum move builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::NcmPlanarBuilder::CutcomOutputContactPoint ( )

Returns the cutter compensation output contact point status
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::NcmPlanarBuilder::CutcomOutputPlane ( )

Returns the cutter compensation output plane status
Created in NX5.0.0.

License requirements : None

int NXOpen::CAM::NcmPlanarBuilder::CutcomTrackingPointType ( )

Returns the cutter compensation tracking point selection
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::CutcomTypes NXOpen::CAM::NcmPlanarBuilder::CutcomType ( )

Returns the cutter compensation type
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::EngageClosedAreaBuilder ( )

Returns the default engage closed area builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::EngageInitialClosedBuilder ( )

Returns the initial engage closed area builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::EngageInitialOpenBuilder ( )

Returns the initial engage open area builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::EngageOpenAreaBuilder ( )

Returns the default engage open area builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::FinalSafeDistanceBuilder ( )

Returns the final safe distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::FinalTypes NXOpen::CAM::NcmPlanarBuilder::FinalType ( )

Returns the final type
Created in NX5.0.0.

License requirements : None

std::vector<NXOpen::Point *> NXOpen::CAM::NcmPlanarBuilder::GetPredrillPoints ( )

The pre-drill points.

Returns: Array of points
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::InitialSafeDistanceBuilder ( )

Returns the initial safe distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::InitialTypes NXOpen::CAM::NcmPlanarBuilder::InitialType ( )

Returns the initial type
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::NcmPlanarBuilder::LimitEngRetToCutRegion ( )

Returns the flag to control limitation of engage and retract motions to cut regions
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::OverlapDistanceBuilder ( )

Returns the start/drill points overlap distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::PredrillPointsEffectDistBuilder ( )

Returns the pre-drill points effective distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutputOptions NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutput ( )

Returns the pre-drill points output option
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::NcmPlanarBuilder::PredrillPointsUseEffectDist ( )

Returns the pre-drill points use effective distance
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::RetractAreaBuilder ( )

Returns the retract area builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarEngRetBuilder* NXOpen::CAM::NcmPlanarBuilder::RetractFinalBuilder ( )

Returns the final retract builder
Created in NX5.0.0.

License requirements : None

void NXOpen::CAM::NcmPlanarBuilder::SetCollisionCheck ( bool newValue )

Sets the collision check activation
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetCutcomMinimumAngle ( double minimumAngle )

Sets the cutter compensation minimum angle
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

minimumAngle minimumangle

void NXOpen::CAM::NcmPlanarBuilder::SetCutcomOutputContactPoint ( bool newValue )

Sets the cutter compensation output contact point status
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetCutcomOutputPlane ( bool outputPlane )

Sets the cutter compensation output plane status
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

outputPlane outputplane

void NXOpen::CAM::NcmPlanarBuilder::SetCutcomTrackingPointType ( int newValue )

Sets the cutter compensation tracking point selection
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetCutcomType ( NXOpen::CAM::NcmPlanarBuilder::CutcomTypes cutcomType )

Sets the cutter compensation type
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

cutcomType cutcomtype

void NXOpen::CAM::NcmPlanarBuilder::SetFinalType ( NXOpen::CAM::NcmPlanarBuilder::FinalTypes finalType )

Sets the final type
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

finalType finaltype

void NXOpen::CAM::NcmPlanarBuilder::SetInitialType ( NXOpen::CAM::NcmPlanarBuilder::InitialTypes initialType )

Sets the initial type
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

initialType initialtype

void NXOpen::CAM::NcmPlanarBuilder::SetLimitEngRetToCutRegion ( bool newValue )

Sets the flag to control limitation of engage and retract motions to cut regions
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetPredrillPoints ( const std::vector< NXOpen::Point * > & predrillPoints )

The pre-drill points
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

predrillPoints Array of points

void NXOpen::CAM::NcmPlanarBuilder::SetPredrillPointsOutput ( NXOpen::CAM::NcmPlanarBuilder::PredrillPointsOutputOptions newValue )

Sets the pre-drill points output option
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetPredrillPointsUseEffectDist ( bool newValue )

Sets the pre-drill points use effective distance
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

void NXOpen::CAM::NcmPlanarBuilder::SetSuppressCutcom ( bool suppressCutcom )

Sets the suppress cutter compensation
Created in NX6.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

suppressCutcom suppresscutcom

void NXOpen::CAM::NcmPlanarBuilder::SetTransferBetweenLevelsType ( NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsTypes transferType )

Sets the transfer between levels type
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

transferType transfertype

void NXOpen::CAM::NcmPlanarBuilder::SetTransferBetweenRegionsType ( NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsTypes transferType )

Sets the transfer between regions type

Deprecated:: Deprecated in NX9.0.0.

Please use CAM::NcmTransfer::Type instead.

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

transferType transfertype

void NXOpen::CAM::NcmPlanarBuilder::SetTransferWithinLevelsType ( NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsTypes transferType )

Sets the transfer within levels type
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

transferType transfertype

void NXOpen::CAM::NcmPlanarBuilder::SetTransferWithinLevelsWith ( NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWiths newValue )

Sets the transfer within levels strategy
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

newValue newvalue

bool NXOpen::CAM::NcmPlanarBuilder::SuppressCutcom ( )

Returns the suppress cutter compensation
Created in NX6.0.0.

License requirements : None

NXOpen::CAM::NcmAvoidancePointBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferAvoidanceFromBuilder ( )

Returns the from point builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmAvoidancePointBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferAvoidanceGohomeBuilder ( )

Returns the gohome point builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmAvoidancePointBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferAvoidanceReturnBuilder ( )

Returns the return point builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmAvoidancePointBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferAvoidanceStartBuilder ( )

Returns the start point builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsSafeDistanceBuilder ( )

Returns the transfer between levels safe distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsTypes NXOpen::CAM::NcmPlanarBuilder::TransferBetweenLevelsType ( )

Returns the transfer between levels type
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmTransfer* NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsBuilder ( )

Returns the Transfer Between Regions builder
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsSafeDistanceBuilder ( )

Returns the transfer between regions safe distance builder (inheritable tool dep)

Deprecated:: Deprecated in NX9.0.0.

Please use CAM::NcmTransfer::SafeDistanceBuilder instead.

Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsTypes NXOpen::CAM::NcmPlanarBuilder::TransferBetweenRegionsType ( )

Returns the transfer between regions type

Deprecated:: Deprecated in NX9.0.0.

Please use CAM::NcmTransfer::Type instead.

Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsHeightBuilder ( )

Returns the transfer within levels height builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsMaxFollowDistanceBuilder ( )

Returns the transfer within levels max follow distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsSafeDistanceBuilder ( )

Returns the transfer within levels safe distance builder (inheritable tool dep)
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsTypes NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsType ( )

Returns the transfer within levels type
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWiths NXOpen::CAM::NcmPlanarBuilder::TransferWithinLevelsWith ( )

Returns the transfer within levels strategy
Created in NX5.0.0.

License requirements : None

The documentation for this class was generated from the following file:

CAM_NcmPlanarBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation