This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two CAE::ResultAccess objects. More...

Inheritance diagram for NXOpen::CAE::ResultParameters:

Public Member Functions
int	AskSectionPlyLayer (int section, int ply)
	Ask section, ply and layer.

void	DisplayMidnodeValue (bool display)
	This is display only command.

bool	GetAbsoluteValue ()
	Ask whether all values are absolute values.

NXOpen::CAE::Result::Averaging	GetAveragingCriteria ()
	Ask averaging criteria.

double	GetBeamFilletRadius ()
	Return the fillet radius.

bool	GetBeamFillets ()
	Return the fillets flag.

bool	GetBeamResultsInLocalCoordinateSystem ()
	Identifies whether beam results are presented in local coordinate system (if true) or in the same coordinate system as the rest of the model.

bool	GetCalculateBeamStrResults ()
	Ask if beam stresses and strains are calculated from element forces and section geometry.

NXOpen::CAE::Result::Complex	GetComplexCriterion ()
	If result is complex it returns which component is set(like real or imaginary)

NXOpen::CAE::Result::ComputationType	GetComputationType ()
	Get computing type.

NXOpen::CAE::Result::CoordinateSystem	GetCoordinateSystem ()
	Ask result coordinate system.

NXOpen::CAE::Result::ElementValueCriterion	GetElementValueCriterion ()
	Ask how element the result is defined.

bool	GetExcludeElementsNotVisible ()
	Ask whether elements which are not visible are consider for summation.

NXOpen::CAE::BaseResultType *	GetGenericResultType ()
	Ask Result type.

int	GetIteration ()
	Ask Current iteration number This method has been deprecated.

int	GetLoadcase ()
	Ask Current loadcase number This method has been deprecated.

double	GetPhaseAngle ()
	Ask phase angle.

NXOpen::CAE::Result::Section	GetResultBeamSection ()
	Ask section where beam results are defined.

NXOpen::CAE::Result::Component	GetResultComponent ()
	Ask result component.

NXOpen::CAE::Result::Location	GetResultDataLocation ()
	Ask FE entity where the result is defined This method has been deprecated.

NXOpen::CAE::Result::Quantity	GetResultDataQuantity ()
	Ask result type This method has been deprecated.

NXOpen::CAE::Result::Section	GetResultDataSection ()
	Ask section of a FE entity where the result is defined This method has been deprecated.

NXOpen::CAE::Result::Section	GetResultShellSection ()
	Ask section where shell results are defined.

NXOpen::CAE::Result::Type	GetResultType ()
	Ask Result type This method has been deprecated.

double	GetScale ()
	Ask scale.

void	GetSelectedCoordinateSystem (NXOpen::CAE::Result::CoordinateSystemSource source, int id)
	Ask selected coordinate system in which results are to be presented Created in NX7.5.1.

NXOpen::CAE::Result::TensorDerivedAbsolute	GetTensorComponentAbsoluteValue ()
	Get the method used when calculating the absolute values for the derived components of CAE::Result::DataTypeTensor like CAE::Result::ComponentMaximumPrincipal.

NXOpen::Unit *	GetUnit ()
	Ask result unit.

NXOpen::CAE::Result::Averaging	InitAveragingCriteria ()
	Ask default averaging criteria.

bool	IsForcedElementResult ()
	Ask whether the result is converted as element result.

bool	IsMidnodeValueDisplayed ()
	Ask whether the result at mid nodes are ignored.

void	MakeElementResult (bool elementResult)
	Make Nodal and Element-Nodal result to Element Result.

void	SetAbsoluteValue (bool absolute)
	Set all values to absolute values.

void	SetAveragingCriteria (const NXOpen::CAE::Result::Averaging &average)
	Set averaging criteria Created in NX6.0.2.

void	SetBeamFilletRadius (double beamFilletRadius)
	Sets the fillet radius as a fraction of the adjacent dimensions Created in NX7.5.0.

void	SetBeamFillets (bool beamFillets)
	Sets the fillets flag Created in NX7.5.0.

void	SetBeamResultsInLocalCoordinateSystem (bool local)
	Presents beam results in local coordinate system (if flag is true) or in the same coordinate system as the rest of the model Created in NX7.5.0.

void	SetCalculateBeamStrResults (bool calcBeamStrResults)
	Sets a flag to calculate beam stresses and strains from element forces and section geometry (if available).

void	SetComplexCriterion (NXOpen::CAE::Result::Complex complex)
	Set complex criteria Created in NX6.0.2.

void	SetComputationType (NXOpen::CAE::Result::ComputationType computeType)
	Set computing type.

void	SetCoordinateSystem (NXOpen::CAE::Result::CoordinateSystem coordinate)
	Set result coordinate system Created in NX6.0.2.

void	SetElementValueCriterion (NXOpen::CAE::Result::ElementValueCriterion criteria)
	Set how element the result is defined This option is only valid for nodal and elemen-nodal result; dose not do anything for element result.

void	SetExcludeElementsNotVisible (bool excludeElements)
	Exclude or include elements which are not visible for computing with sum option.

void	SetGenericResultType (NXOpen::CAE::BaseResultType *type)
	Set Result type Created in NX7.5.0.

void	SetLoadcaseIteration (int loadcase, int iteration)
	Set Current loadcase and iteration.

void	SetPhaseAngle (double angle)
	Sets the phase angle at which result will be evaluated.

void	SetResultBeamSection (NXOpen::CAE::Result::Section section)
	Set section where beam results are defined Created in NX7.5.0.

void	SetResultComponent (NXOpen::CAE::Result::Component component)
	Set result component Created in NX6.0.2.

void	SetResultDataLocation (NXOpen::CAE::Result::Location location)
	Set FE entity where the result is defined This method has been deprecated.

void	SetResultDataQuantity (NXOpen::CAE::Result::Quantity quantity)
	Set result quantity This method has been deprecated.

void	SetResultDataSection (NXOpen::CAE::Result::Section section)
	Set section of a FE entity where the result is defined This method has been deprecated.

void	SetResultShellSection (NXOpen::CAE::Result::Section section)
	Set section where shell results are defined Created in NX7.5.0.

void	SetResultType (const NXOpen::CAE::Result::Type &type)
	Set Result type This method has been deprecated.

void	SetScale (double scale)
	Set scale.

void	SetSectionPlyLayer (int section, int ply, int layer)
	Set section, ply and layer Created in NX6.0.2.

void	SetSelectedCoordinateSystem (NXOpen::CAE::Result::CoordinateSystemSource source, int id)
	Set selected coordinate system in which results are to be presented Coordinate systems labels defined in a result file can be retrieved using CAE::Result::GetResultCoordinateSystems.

void	SetTensorComponentAbsoluteValue (NXOpen::CAE::Result::TensorDerivedAbsolute absolute)
	Set the method used when calculating the absolute values for the derived components of CAE::Result::DataTypeTensor like CAE::Result::ComponentMaximumPrincipal.

void	SetUnit (NXOpen::Unit *unit)
	Set result unit Created in NX6.0.2.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two CAE::ResultAccess objects.

   <br/>Use @link CAE::ResultManager CAE::ResultManager@endlink  to create an @link CAE::ResultParameters CAE::ResultParameters@endlink 

   <br/>You can modifiy these values but validation of correctness will only be perfomed 
   when this object is set to a @link CAE::ResultAccess CAE::ResultAccess@endlink  object
<br> To obtain an instance of this class use @link Session::ResultManager Session::ResultManager@endlink .  <br>

Created in NX6.0.2.

Member Function Documentation

int NXOpen::CAE::ResultParameters::AskSectionPlyLayer	(	int *	section,
		int *	ply
	)

Ask section, ply and layer.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

section	section
ply	ply

void NXOpen::CAE::ResultParameters::DisplayMidnodeValue ( bool display )

This is display only command.

Setting this value will not change modify ResultAccess queries. But Post view will ignore midnode values during display

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

display display

bool NXOpen::CAE::ResultParameters::GetAbsoluteValue ( )

Ask whether all values are absolute values.

  @return

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Averaging NXOpen::CAE::ResultParameters::GetAveragingCriteria ( )

Ask averaging criteria.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

double NXOpen::CAE::ResultParameters::GetBeamFilletRadius ( )

Return the fillet radius.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::GetBeamFillets ( )

Return the fillets flag.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::GetBeamResultsInLocalCoordinateSystem ( )

Identifies whether beam results are presented in local coordinate system (if true) or in the same coordinate system as the rest of the model.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::GetCalculateBeamStrResults ( )

Ask if beam stresses and strains are calculated from element forces and section geometry.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Complex NXOpen::CAE::ResultParameters::GetComplexCriterion ( )

If result is complex it returns which component is set(like real or imaginary)

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::ComputationType NXOpen::CAE::ResultParameters::GetComputationType ( )

Get computing type.

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::CoordinateSystem NXOpen::CAE::ResultParameters::GetCoordinateSystem ( )

Ask result coordinate system.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::ElementValueCriterion NXOpen::CAE::ResultParameters::GetElementValueCriterion ( )

Ask how element the result is defined.

       This option is only valid for nodal and elemen-nodal result.  @return

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::GetExcludeElementsNotVisible ( )

Ask whether elements which are not visible are consider for summation.

Returns: Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::BaseResultType* NXOpen::CAE::ResultParameters::GetGenericResultType ( )

Ask Result type.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

int NXOpen::CAE::ResultParameters::GetIteration ( )

Ask Current iteration number This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

int NXOpen::CAE::ResultParameters::GetLoadcase ( )

Ask Current loadcase number This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

double NXOpen::CAE::ResultParameters::GetPhaseAngle ( )

Ask phase angle.

If complex result is set to Phaseangle type then user can specify an angle at which result will be evaluated

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Section NXOpen::CAE::ResultParameters::GetResultBeamSection ( )

Ask section where beam results are defined.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Component NXOpen::CAE::ResultParameters::GetResultComponent ( )

Ask result component.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Location NXOpen::CAE::ResultParameters::GetResultDataLocation ( )

Ask FE entity where the result is defined This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::BaseResultType::Location instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Quantity NXOpen::CAE::ResultParameters::GetResultDataQuantity ( )

Ask result type This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Section NXOpen::CAE::ResultParameters::GetResultDataSection ( )

Ask section of a FE entity where the result is defined This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Section NXOpen::CAE::ResultParameters::GetResultShellSection ( )

Ask section where shell results are defined.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Type NXOpen::CAE::ResultParameters::GetResultType ( )

Ask Result type This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Returns

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

double NXOpen::CAE::ResultParameters::GetScale ( )

Ask scale.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

void NXOpen::CAE::ResultParameters::GetSelectedCoordinateSystem	(	NXOpen::CAE::Result::CoordinateSystemSource *	source,
		int *	id
	)

Ask selected coordinate system in which results are to be presented
Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

source	source
id	id

NXOpen::CAE::Result::TensorDerivedAbsolute NXOpen::CAE::ResultParameters::GetTensorComponentAbsoluteValue ( )

Get the method used when calculating the absolute values for the derived components of CAE::Result::DataTypeTensor like CAE::Result::ComponentMaximumPrincipal.

Returns: Created in NX8.0.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::Unit* NXOpen::CAE::ResultParameters::GetUnit ( )

Ask result unit.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

NXOpen::CAE::Result::Averaging NXOpen::CAE::ResultParameters::InitAveragingCriteria ( )

Ask default averaging criteria.

Returns: Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::IsForcedElementResult ( )

Ask whether the result is converted as element result.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

bool NXOpen::CAE::ResultParameters::IsMidnodeValueDisplayed ( )

Ask whether the result at mid nodes are ignored.

Returns: Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

void NXOpen::CAE::ResultParameters::MakeElementResult ( bool elementResult )

Make Nodal and Element-Nodal result to Element Result.

Does not do anything if the result is element result already. To define what value should be used to represent an element, use CAE::ResultParameters::SetElementValueCriterion

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

elementResult elementresult

void NXOpen::CAE::ResultParameters::SetAbsoluteValue ( bool absolute )

Set all values to absolute values.

       Warning: Once converted to absolute value it is not possible to revert to original values.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

absolute absolute

void NXOpen::CAE::ResultParameters::SetAveragingCriteria ( const NXOpen::CAE::Result::Averaging & average )

Set averaging criteria
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

average average

void NXOpen::CAE::ResultParameters::SetBeamFilletRadius ( double beamFilletRadius )

Sets the fillet radius as a fraction of the adjacent dimensions
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

beamFilletRadius beam fillet radius

void NXOpen::CAE::ResultParameters::SetBeamFillets ( bool beamFillets )

Sets the fillets flag
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

beamFillets beam fillets

void NXOpen::CAE::ResultParameters::SetBeamResultsInLocalCoordinateSystem ( bool local )

Presents beam results in local coordinate system (if flag is true) or in the same coordinate system as the rest of the model
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

local local

void NXOpen::CAE::ResultParameters::SetCalculateBeamStrResults ( bool calcBeamStrResults )

Sets a flag to calculate beam stresses and strains from element forces and section geometry (if available).

        Does not affect other result types and element types

Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

calcBeamStrResults calc beam str results

void NXOpen::CAE::ResultParameters::SetComplexCriterion ( NXOpen::CAE::Result::Complex complex )

Set complex criteria
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

complex complex

void NXOpen::CAE::ResultParameters::SetComputationType ( NXOpen::CAE::Result::ComputationType computeType )

Set computing type.

Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

computeType compute type

void NXOpen::CAE::ResultParameters::SetCoordinateSystem ( NXOpen::CAE::Result::CoordinateSystem coordinate )

Set result coordinate system
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

coordinate coordinate

void NXOpen::CAE::ResultParameters::SetElementValueCriterion ( NXOpen::CAE::Result::ElementValueCriterion criteria )

Set how element the result is defined This option is only valid for nodal and elemen-nodal result; dose not do anything for element result.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

criteria criteria

void NXOpen::CAE::ResultParameters::SetExcludeElementsNotVisible ( bool excludeElements )

Exclude or include elements which are not visible for computing with sum option.

Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

excludeElements exclude elements

void NXOpen::CAE::ResultParameters::SetGenericResultType ( NXOpen::CAE::BaseResultType * type )

Set Result type
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

type type

void NXOpen::CAE::ResultParameters::SetLoadcaseIteration	(	int	loadcase,
		int	iteration
	)

Set Current loadcase and iteration.

   This method has been deprecated. This functionality was moved to this class @link CAE::BaseResultType CAE::BaseResultType@endlink , which         can be obtained by using  @link CAE::ResultParameters::GetGenericResultType CAE::ResultParameters::GetGenericResultType@endlink .

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::SetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

loadcase	loadcase number varies from 0 to N-1
iteration	iteration number varies from 0 to N-1

void NXOpen::CAE::ResultParameters::SetPhaseAngle ( double angle )

Sets the phase angle at which result will be evaluated.

This is only value if complex result is set to the PhaseAngle type
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

angle angle

void NXOpen::CAE::ResultParameters::SetResultBeamSection ( NXOpen::CAE::Result::Section section )

Set section where beam results are defined
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

section section

void NXOpen::CAE::ResultParameters::SetResultComponent ( NXOpen::CAE::Result::Component component )

Set result component
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

component component

void NXOpen::CAE::ResultParameters::SetResultDataLocation ( NXOpen::CAE::Result::Location location )

Set FE entity where the result is defined This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

location location

void NXOpen::CAE::ResultParameters::SetResultDataQuantity ( NXOpen::CAE::Result::Quantity quantity )

Set result quantity This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

quantity quantity

void NXOpen::CAE::ResultParameters::SetResultDataSection ( NXOpen::CAE::Result::Section section )

Set section of a FE entity where the result is defined This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

section section

void NXOpen::CAE::ResultParameters::SetResultShellSection ( NXOpen::CAE::Result::Section section )

Set section where shell results are defined
Created in NX7.5.0.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

section section

void NXOpen::CAE::ResultParameters::SetResultType ( const NXOpen::CAE::Result::Type & type )

Set Result type This method has been deprecated.

This functionality was moved to this class CAE::BaseResultType , which can be obtained by using CAE::ResultParameters::GetGenericResultType .

Deprecated:: Deprecated in NX8.0.0. Use CAE::ResultParameters::GetGenericResultType instead.

Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

type type

void NXOpen::CAE::ResultParameters::SetScale ( double scale )

Set scale.

This will affect all subsequent result query.
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

scale scale

void NXOpen::CAE::ResultParameters::SetSectionPlyLayer	(	int	section,
		int	ply,
		int	layer
	)

Set section, ply and layer
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

section	section
ply	ply
layer	layer

void NXOpen::CAE::ResultParameters::SetSelectedCoordinateSystem	(	NXOpen::CAE::Result::CoordinateSystemSource	source,
		int	id
	)

Set selected coordinate system in which results are to be presented Coordinate systems labels defined in a result file can be retrieved using CAE::Result::GetResultCoordinateSystems.

Created in NX7.5.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

source	source
id	id

void NXOpen::CAE::ResultParameters::SetTensorComponentAbsoluteValue ( NXOpen::CAE::Result::TensorDerivedAbsolute absolute )

Set the method used when calculating the absolute values for the derived components of CAE::Result::DataTypeTensor like CAE::Result::ComponentMaximumPrincipal.

Created in NX8.0.1.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

absolute absolute

void NXOpen::CAE::ResultParameters::SetUnit ( NXOpen::Unit * unit )

Set result unit
Created in NX6.0.2.

License requirements : nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")

Parameters

unit unit

The documentation for this class was generated from the following file:

CAE_ResultParameters.hxx

Public Member Functions

Detailed Description

Member Function Documentation