NXOpen::CAE Namespace Reference

Provides classes and interfaces relating to Advanced Simulation and Design Simulation. More...

Namespaces
namespace	FTK
	Provides classes and interfaces to Function Toolkit.
namespace	ModelCheck
	Provides classes and interfaces relating to Model Check.
namespace	Optimization
	Provides classes and interfaces relating to Optimization.
namespace	ResponseSimulation
	Provides classes and interfaces for Response Simulation.
namespace	Xyplot
	Provides classes and interfaces for XY Graphing.

Classes
class	AbstractionManager
	Provides method for creating builder for abstraction commands in a fem part. More...
class	AdjacentFaceMethod
	Represents the output from the adjacent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	AfuData
	the data used to create an AFU Data Record Created in NX4.0.0. More...
class	AfuDataConvertor
	Convert data values for the AFU Data Record To obtain an instance of this class, refer to CAE::AfuManager Created in NX5.0.0. More...
class	AfuHeaderId
	the data used to create header id information for an AFU Data Record Created in NX5.0.0. More...
class	AfuManager
	AFU File and Data Record Manager To obtain an instance of this class, refer to Session Created in NX4.0.0. More...
class	AfuMathOperation
	Does math operations on the AFU Data Records To obtain an instance of this class, refer to CAE::AfuManager Created in NX5.0.0. More...
class	AssignNodalCSBuilder
	Represents a @link CAE::AssignNodalCSBuilder CAE::AssignNodalCSBuilder@endlink <br> To create a new instance of this class, use @link CAE::NodeElementInfoManager::CreateAssignNodalCsBuilder CAE::NodeElementInfoManager::CreateAssignNodalCsBuilder @endlink <br> Default values. More...
class	AssyFEModel
	This class represents an Assembly Finite Element Model. More...
class	AssyFemPart
	Represents an NX part of type .afm. More...
class	AutoBCBuilder
	Builds one or more CAE::SimSimulationObject object(s). More...
class	AutoMacViewerBuilder
	Represents the correlation pairing viewer builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreateAutoMacViewerBuilder Created in NX6.0.0. More...
class	AutomaticMorphBuilder
	Represents a CAE::AutomaticMorphBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateAutomaticMorphBuilder Created in NX9.0.0. More...
class	AutomaticSweepBetweenSelection
	Builder for creating Manual Hex Mesh - Face Dependency type - Multi Face Automatic To create a new instance of this class, use CAE::SweepBetweenMeshBuilder::AutomaticSweepBetween Created in NX7.5.2. More...
class	AutoPairs
	Represents an autopairs obj. More...
class	AutoPairsBuilder
	Builds a CAE::AutoPairs object which represets a recipe for generating face pairs from a selected set of faces or solids in the model whose distance is less than a specified tolerance. More...
class	BaseFEModel
	This class represents an Assembly Finite Element Model. More...
class	BaseFemPart
	Represents an NX part of type .afm. More...
class	BaseIteration
	This class provides interfaces to query iteration attributes An instance of this class can not be obtained Created in NX7.5.0. More...
class	BaseLoadcase
	This class provides interfaces to query loadcase attributes An instance of this class can not be obtained Created in NX7.5.0. More...
class	BaseResultType
	This class provides interfaces to query result type attributes An instance of this class can not be obtained Created in NX7.5.0. More...
class	BeamEADBuilder
	This class provides Beam/Bar Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateBeamEadBuilder CAE::NodeElementManager::CreateBeamEadBuilder @endlink <br> Default values. More...
class	BeamSection
	Represents a Beam Cross Section This is an abstract class. More...
class	BeamSectionCollection
	Represents the collection of all CAE::BeamSection in a fem part. More...
class	BeamSectionOffsetOptions
	<br> To create a new instance of this class, use @link CAE::CaePart::NewBeamSectionOffsetOptions CAE::CaePart::NewBeamSectionOffsetOptions @endlink <br> Created in NX7.5.0. More...
class	BeamSectionOptions
	Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file. More...
class	BeamSectionOrientationOptions
	<br> To create a new instance of this class, use @link CAE::CaePart::NewBeamSectionOrientationOptions CAE::CaePart::NewBeamSectionOrientationOptions @endlink <br> Created in NX7.5.0. More...
class	Bolt
	Represents Bolt To create or edit an instance of this class, use CAE::BoltBuilder Created in NX7.5.0. More...
class	BoltBuilder
	Represents a CAE::BoltBuilder To create a new instance of this class, use CAE::BoltCollection::CreateBoltBuilder Created in NX7.5.0. More...
class	BoltCollection
	Provides method for creating builder for bolt operation commands in a fem/afem part. More...
class	BushingEADBuilder
	This class provides Bushing Associated Data Support To create a new instance of this class, use CAE::NodeElementManager::CreateBushingEadBuilder Created in NX7.5.0. More...
class	CADModeling
	The CADModeling class provides method to create cad face using polygon face To obtain an instance of this class, refer to CAE::FemPart Created in NX8.5.0. More...
class	CAEBody
	Represents a CAE body geometry. More...
class	CAEConnection
	Represents Connection Recipe To create or edit an instance of this class, use CAE::CAEConnectionBuilder Created in NX6.0.0. More...
class	CAEConnectionBuilder
	Builder for creating Connection Recipes To create a new instance of this class, use CAE::CAEConnectionCollection::CreateConnectionBuilder Created in NX6.0.0. More...
class	CAEConnectionCollection
	Provides method for creating builder for connection operation commands in a fem/afem part. More...
class	CaeDataContainer
	Represents a list of named properties, where the property name is a unique string. More...
class	CaeDOFSet
	Represents a dofset class CAE::CaeDOFSet . More...
class	CaeDOFSetCollection
	Provides methods for managing DOFSet CAE::CaeDOFSet. More...
class	CaeDOFSetDisplay
	Represents a DOF Set display attributes. More...
class	CAEEdge
	Represents a CAE edge geometry. More...
class	CAEFace
	Represents a CAE face geometry. More...
class	CaeGroup
	Represents a group class CAE::CaeGroup . More...
class	CaeGroupCollection
	Provides methods for managing set CAE::CaeGroup. More...
class	CaePart
	This is an abstract class for NX parts of type .fem and .sim. More...
class	CaeRegion
	Represents a cae region object. More...
class	CaeRegionBuilder
	Represents a CAE::CaeRegionBuilder builder To create a new instance of this class, use CAE::SimSimulation::CreateCaeRegionBuilder Created in NX7.0.0. More...
class	CaeRegionCollection
	Provides methods for managing CAE::CaeRegion in a sim part. More...
class	CaeSession
	This class provides access to all session related CAE functionality. More...
class	CAESet
	Represents a group of CAE object sets. More...
class	CAEVertex
	Represents a CAE vertex geometry. More...
class	CAEWeldConnection
	Represents WeldConnection Recipe To create or edit an instance of this class, use CAE::CAEWeldConnectionBuilder Created in NX6.0.0. More...
class	CAEWeldConnectionBuilder
	Builder for creating 1D Weld Connection To create a new instance of this class, use CAE::CAEConnectionCollection::CreateWeldConnectionBuilder Created in NX6.0.0. More...
class	CfdContactPreventionConstraint
	The contact prevention constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain. More...
class	CfdContactPreventionConstraintBuilder
	Represents a CAE::CfdContactPreventionConstraint builder To create a new instance of this class, use CAE::CfdContactPreventionConstraintCollection::CreateBuilder Created in NX9.0.0. More...
class	CfdContactPreventionConstraintCollection
	Provides methods for managing Contact Prevention ConstraintsCAE::CfdContactPreventionConstraint in a fem part. More...
class	CfdLocalResolutionConstraint
	The local resolution constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain. More...
class	CfdLocalResolutionConstraintBuilder
	Represents a CAE::CfdLocalResolutionConstraint builder To create a new instance of this class, use CAE::CfdLocalResolutionConstraintCollection::CreateBuilder Created in NX9.0.0. More...
class	CfdLocalResolutionConstraintCollection
	Provides methods for managing Local Resolution ConstraintsCAE::CfdLocalResolutionConstraint in a fem part. More...
class	CircularEdgeMethod
	Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.0. More...
class	CircularImprintBuilder
	Builder for creating Circular Imprint To create a new instance of this class, use CAE::AbstractionManager::CreateCircularImprintBuilder Created in NX7.5.0. More...
class	ClippingParameters
	This class is worked as a packet of information that can be used to set the clipping parameters of a CAE::Post object. More...
class	ComacViewerBuilder
	Represents the correlation MAC matrix viewer builder To create a new instance of this class, use CAE::CorrelSolutionCollection::CreateComacViewerBuilder Created in NX6.0.0. More...
class	CombineTrisBuilder
	Builder for creating Combine Tris To create a new instance of this class, use CAE::NodeElementManager::CreateCombineTrisBuilder Created in NX7.0.0. More...
class	CompanionResult
	Represents additional results data that will augment a primary set of Analysis results associated to a CAE::SimSolution . More...
class	CompanionResultBuilder
	Represents a @link CAE::CompanionResult CAE::CompanionResult@endlink builder and can be used to create or edit an @link CAE::CompanionResult CAE::CompanionResult@endlink <br> To create a new instance of this class, use @link CAE::CompanionResultCollection::CreateCompanionResultBuilder CAE::CompanionResultCollection::CreateCompanionResultBuilder @endlink <br> Default values. More...
class	CompanionResultCollection
	Provides methods for managing CompanionResults CAE::CompanionResult in a CAE::SimSolution. More...
class	ConstraintResolutionBuilder
	Represents a CAE::ConstraintResolutionBuilder builder which can resolve conflicts between the two input constraints by a specified rule To create a new instance of this class, use CAE::SimSolution::CreateConstraintResolutionBuilder Created in NX8.0.0. More...
class	CorrelAlignmentBuilder
	This builder is used to control the alignment parameters of a CAE::CorrelSolution To create a new instance of this class, use CAE::SimSolution::CreateAlignmentBuilder Created in NX6.0.1. More...
class	CorrelApplyAlignmentFromBuilder
	This builder is used to apply the alignment matrix read from selected xml file to the test model To create a new instance of this class, use CAE::CorrelManager::CreateCorrelApplyAlignmentFromBuilder Created in NX9.0.0. More...
class	CorrelBaseBuilder
	Represents the abstract builder class for all objects defined in correl meta solution This is an abstract class, and cannot be created. More...
class	CorrelFineTuneAlignmentBuilder
	This builder is used to nudge the alignment by a fine adjustment To create a new instance of this class, use CAE::CorrelManager::CreateCorrelFineTuneAlignmentBuilder Created in NX9.0.0. More...
class	CorrelManager
	Represents the correl manager that contains all correl and pre-test objects To obtain an instance of this class, refer to CAE::SimSimulation Created in NX6.0.0. More...
class	CorrelModePairingBuilder
	This builder is used to control the mode pairing behavior of a CAE::CorrelSolution To create a new instance of this class, use CAE::CorrelSolution::CreateModePairingBuilder Created in NX6.0.1. More...
class	CorrelSolution
	Represents a CAE::CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions To create or edit an instance of this class, use CAE::CorrelSolutionBuilder Created in NX6.0.0. More...
class	CorrelSolutionBuilder
	This is a manager to the CAE::CorrelSolution class. More...
class	CorrelSolutionCollection
	Represents a collection of correl meta solution To obtain an instance of this class, refer to CAE::CorrelManager Created in NX6.0.0. More...
class	CrossSectionParameters
	This class is worked as a packet of information that can be used to change cross-section state. More...
class	CylinderFaceMethod
	Represents the output from the cylinder face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	DeformationParameters
	This class is worked as a packet of information that can be be used to deform CAE::Post objects. More...
class	DeletePolygonFaceBuilder
	Builder for Delete Polygon Face To create a new instance of this class, use CAE::AbstractionManager::CreateDeletePolygonFaceBuilder Created in NX8.5.0. More...
class	DependentMesh
	Represents Mesh Recipe To create or edit an instance of this class, use CAE::DependentMeshBuilder Created in NX5.0.0. More...
class	DependentMeshBuilder
	Represents a CAE::Mesh2d To create a new instance of this class, use CAE::MeshManager::CreateDependentMeshBuilder Created in NX5.0.0. More...
class	DependentMeshListItemBuilder
	Represents a CAE::DependentMeshListItemBuilder To create a new instance of this class, use CAE::DependentMeshBuilder::CreateNewListItem Created in NX5.0.0. More...
class	DependentMeshListItemBuilderList
	Represents a list of objects. More...
class	DestinationCollectorBuilder
	Represents a Element Collector Container (Ecc) selection. More...
class	DurabilityAxisSearch
	Represents a CAE::DurabilityAxisSearch . More...
class	DurabilityAxisSearchCollection
	Represents a collection of stress axes. More...
class	DurabilityDamageEvaluationBuilder
	Represents the builder for evaluating durability damage. More...
class	DurabilityDamageReportBuilder
	Represents the builder for reporting the durability damage. More...
class	DurabilityDataControlBuilder
	Represents a builder class for the transient event data control. More...
class	DurabilityEvaluateFatigueHistoryBuilder
	Represents the builder for evaluating fatigue histories. More...
class	DurabilityEvent
	Represents a CAE::DurabilityEvent , which is an event of a durability solution process. More...
class	DurabilityEventBuilder
	Represents the abstract builder class for all durability events. More...
class	DurabilityEventCollection
	Represents a collection of durability events. More...
class	DurabilityEventFatigueSettingsBuilder
	Represents a builder class for the event fatigue settings. More...
class	DurabilityEventOverridesBuilder
	Represents a builder class for Event Overrides. More...
class	DurabilityEventSolverBuilder
	Represents the builder for solving the durability event. More...
class	DurabilityEventStrengthSettingsBuilder
	Represents a builder class for the event strength settings. More...
class	DurabilityExcitation
	Represents a CAE::DurabilityExcitation . More...
class	DurabilityExcitationBuilder
	Represents the abstract builder class for all durability excitations. More...
class	DurabilityExcitationCollection
	Represents a collection of durability excitations. More...
class	DurabilityFatigue
	Represents a CAE::DurabilityFatigue . More...
class	DurabilityFatigueCollection
	Represents a collection of event fatigue settings. More...
class	DurabilityFunctionExcitation
	Represents a CAE::DurabilityFunctionExcitation . More...
class	DurabilityFunctionExcitationBuilder
	Represents a CAE::DurabilityFunctionExcitation builder. More...
class	DurabilityLoadPattern
	Represents a CAE::DurabilityLoadPattern . More...
class	DurabilityLoadPatternBuilder
	Represents a CAE::DurabilityLoadPattern builder. More...
class	DurabilityManager
	Represents the durability manager that contains all durability objects. More...
class	DurabilityMetaSolution
	Represents a CAE::DurabilityMetaSolution . More...
class	DurabilityMetaSolutionBuilder
	Represents a CAE::DurabilityMetaSolution builder. More...
class	DurabilityMetaSolutionCollection
	Represents a collection of correl meta solution. More...
class	DurabilityRandomEvent
	Represents a CAE::DurabilityRandomEvent . More...
class	DurabilityRandomEventBuilder
	Represents the builder for the random durability event. More...
class	DurabilityRandomFatigue
	Represents a CAE::DurabilityRandomFatigue . More...
class	DurabilityRandomFatigueBuilder
	Represents a builder class for the event fatigue settings. More...
class	DurabilityRandomFatigueCollection
	Represents a collection of random fatigue. More...
class	DurabilityResultPath
	Represents a CAE::DurabilityResultPath . More...
class	DurabilityResultPathBuilder
	Represents a CAE::DurabilityResultPath builder. More...
class	DurabilityResultsReportBuilder
	Represents the builder for reporting the durability results. More...
class	DurabilitySolveOptions
	Represents a CAE::DurabilitySolveOptions . More...
class	DurabilitySolveOptionsCollection
	Represents a collection of correl meta solution. More...
class	DurabilitySolverBuilder
	Represents the builder for solving the durability solution process. More...
class	DurabilityStaticEvent
	Represents a CAE::DurabilityStaticEvent . More...
class	DurabilityStaticEventBuilder
	Represents the builder for the static durability event. More...
class	DurabilityStrainGageAnalyzerBuilder
	Represents the builder for analyzing strain gage data. More...
class	DurabilityStrength
	Represents a CAE::DurabilityStrength . More...
class	DurabilityStrengthCollection
	Represents a collection of event strength settings. More...
class	DurabilityStressAxesBuilder
	Represents a builder class for the event fatigue settings. More...
class	DurabilityTransientEvent
	Represents a CAE::DurabilityTransientEvent . More...
class	DurabilityTransientEventBuilder
	Represents the builder for the transient durability event. More...
class	EdgeDensity
	Represents a CAE edge density. More...
class	EdgePathMethod
	Represents a CAE::EdgePathMethod . More...
class	EdgeSticherBuilder
	Represents a @link CAE::EdgeSticherBuilder CAE::EdgeSticherBuilder@endlink <br> To create a new instance of this class, use @link CAE::FemPart::CreateEdgeSticherBuilder CAE::FemPart::CreateEdgeSticherBuilder @endlink <br> Default values. More...
class	ElemEdgePathMethod
	Represents a CAE::ElemEdgePathMethod . More...
class	ElementConnectivityBuilder
	Represents a CAE::ElementConnectivityBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementConnectivityBuilder Created in NX5.0.0. More...
class	ElementCreateBuilder
	Represents a CAE::ElementCreateBuilder which allows you to manually create elements from existing nodes. More...
class	ElementDeleteBuilder
	Represents a CAE::ElementDeleteBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateDeleteElementBuilder Created in NX5.0.0. More...
class	ElementExtractBuilder
	Builder for creating Element Extract To create a new instance of this class, use CAE::NodeElementManager::CreateElementExtractBuilder Created in NX7.5.0. More...
class	ElementExtrudeBuilder
	Represents a CAE::ElementExtrudeBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementExtrudeBuilder Created in NX5.0.0. More...
class	ElementModifyLabelBuilder
	Represents a CAE::ElementModifyLabelBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyLabelBuilder Created in NX5.0.0. More...
class	ElementModifyOrderBuilder
	Represents a CAE::ElementModifyOrderBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyOrderBuilder Created in NX6.0.1. More...
class	ElementModifyTypeBuilder
	Represents a CAE::ElementModifyTypeBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementModifyTypeBuilder Created in NX8.5.0. More...
class	ElementProjectBuilder
	Represents a CAE::ElementProjectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementProjectBuilder Created in NX5.0.0. More...
class	ElementReflectBuilder
	Represents a CAE::ElementReflectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementReflectBuilder Created in NX5.0.0. More...
class	ElementRevolveBuilder
	Represents a CAE::ElementRevolveBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementRevolveBuilder Created in NX5.0.0. More...
class	ElementSplitBuilder
	Represents a CAE::ElementSplitBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementSplitBuilder Created in NX5.0.0. More...
class	ElementTranslateBuilder
	Represents a CAE::ElementTranslateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateElementTranslateBuilder Created in NX5.0.0. More...
class	ElementTypeBuilder
	Represents the specification of the FEA Element Type for a meshing dialog. More...
class	ElementTypes
	Represents an ElementTypes class. More...
class	FaceDensity
	Represents a CAE face density. More...
class	FaceFromBoundaryBuilder
	Builder for creating Polygon Face by boundary To create a new instance of this class, use CAE::AbstractionManager::CreateFaceFromBoundaryBuilder Created in NX8.5.0. More...
class	FeatureEdgeNodeMethod
	Represents the output from the feature edge node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FeatureElemEdgeMethod
	Represents the output from the feature element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FeatureElemFaceMethod
	Represents the output from the feature element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FeatureElemMethod
	Represents the output from the feature element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FeatureNodeMethod
	Represents the output from the feature node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FeatureShellElemMethod
	Represents the output from the feature shell element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.2. More...
class	FEElemEdge
	Represents a Finite Element Edge. More...
class	FEElement
	Represents a Finite Element. More...
class	FEElementLabelMap
	Represents a Elementl Label to an CAE::FEElement map, it can be used to quickly convert a CAE::FEElement label, which is generally used in solver input files and results files, in the element object itself CAE::FEElement. More...
class	FEElemFace
	Represents a Finite Element Face. More...
class	FEModel
	This class represents a Finite Element Model. More...
class	FEModelOccAttribute
	This class represents an Interface to the Finite Element Model Attributes. More...
class	FEModelOccurrence
	This class represents a Finite Element Model Occurrence. More...
class	FemPart
	Represents an NX part of type .fem. More...
class	FemSynchronizeOptions
	Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file. More...
class	FENode
	Represents a Finite Element. More...
class	FENodeLabelMap
	Represents a Nodel Label to an CAE::FENode map, it can be used to quickly convert a CAE::FENode label, which is generally used in solver input files and results files, in the node object itself CAE::FENode. More...
class	FilletFaceMethod
	Represents the output from the fillet face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	FlatPatternsBuilder
	Represents a Flat Patterns Builder. More...
class	FluidDomainBuilder
	Represents a @link CAE::FluidDomainRecipe CAE::FluidDomainRecipe@endlink <br> To create a new instance of this class, use @link CAE::FluidDomainCollection::CreateBuilder CAE::FluidDomainCollection::CreateBuilder @endlink <br> Default values. More...
class	FluidDomainCollection
	Provides methods for managing fluid domainsCAE::FluidDomainRecipe in a fem part. More...
class	FluidDomainRecipe
	Represents a FluidDomainRecipe. More...
class	FreeBodyResultsBuilder
	Represents a CAE::FreeBodyResultsBuilder To obtain an instance of this class use Session::ResultManager . More...
class	Function
	Represents a function object To create or edit an instance of this class, use CAE::FunctionBuilder Created in NX5.0.0. More...
class	FunctionBuilder
	This builder class is used to create or edit CAE::Function objects. More...
class	FunctionCollection
	Represents a collection of function objects To obtain an instance of this class, refer to BasePart Created in NX5.0.0. More...
class	GapEADBuilder
	This class provides Gap Associated Data Support To create a new instance of this class, use CAE::NodeElementManager::CreateGapEadBuilder Created in NX7.5.0. More...
class	GeneralGeometryBeamSection
	Represents a General Geometry Beam Cross Section To create or edit an instance of this class, use CAE::GeneralGeometryBeamSectionBuilder Created in NX7.5.0. More...
class	GeneralGeometryBeamSectionBuilder
	Represents a CAE::GeneralGeometryBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateGeneralGeometryBeamSectionBuilder Created in NX7.5.0. More...
class	GlobalLayupImportFromPptBuilder
	Represents a Global Layup IMport From Ppt Builder. More...
class	GRMSearch
	Contains methods for searching Teamcenter for CAE objects, as well as a cache of already found items. More...
class	GroupElemMethod
	Represents the output from the Group Element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	GroupElemMethodElemOption
	Represents the output from the Group Element smart selector method. More...
class	GroupFaceMethod
	Represents the output from the Group Face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	GroupMethod
	Represents the output from the Group smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	GroupNodeMethod
	Represents the output from the Group Node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	IBeamSectionBuilder
	Represents a CAE::IBeamSectionBuilder This is an abstract class Created in NX7.5.0. More...
class	IExportableFEEntity
	Represents an EXPORTABLE_FE_ENTITY. More...
class	IFEModel
	This class represents an Interface to the Finite Element Model. More...
class	IFolder
	This class represents an Interface to the Folder. More...
class	IHierarchicalFEModel
	This class represents an Interface to the Finite Element Model. More...
class	IMeshCollector
	Represents the base IMeshCollector class for MeshCollector and MeshCollectorOccurrence classes. More...
class	IMeshManager
	Manages meshesCAE::IMeshManager in cae parts. More...
class	ImportedResult
	Represents analysis results for a imported solver results file. More...
class	Iteration
	Represents iteration present in a CAE::Loadcase . More...
class	Laminate
	Represents a Laminate, which is a specialized kind of CAE::PhysicalPropertyTable. More...
class	LaminateDampingFactorBuilder
	The builder for the damping factor. More...
class	LaminateDrapingData
	Encapsulate the ply information related to the draping algorithm To create or edit an instance of this class, use CAE::LaminateDrapingDataBuilder Created in NX6.0.0. More...
class	LaminateDrapingDataBuilder
	Represents a CAE::LaminateDrapingData builder To create a new instance of this class, use CAE::LaminatePly::CreateDrapingDataBuilder Created in NX6.0.0. More...
class	LaminateDrapingExtension
	Encapsulate the ply information related to a ply draping extension To create or edit an instance of this class, use CAE::LaminateDrapingExtensionBuilder Created in NX8.5.0. More...
class	LaminateDrapingExtensionBuilder
	Builder class for CAE::LaminateDrapingExtension To create a new instance of this class, use CAE::LaminatePly::CreateDrapingExtensionBuilder Created in NX8.5.0. More...
class	LaminateDrapingOrientation
	Encapsulates the ply draping results Don't support KF. More...
class	LaminateDynamicEvent
	The Laminate Dynamic Event. More...
class	LaminateDynamicEventCollection
	Represents a collection of laminate dynamic events To obtain an instance of this class, refer to CAE::LaminateDynamicSim Created in NX9.0.0. More...
class	LaminateDynamicSim
	The Laminate Dynamic Simulation builder is the journalling interface to build the LaminateDyanmicSim object. More...
class	LaminateDynamicSimBuilder
	Represents a CAE::LaminateDynamicSim builder To create a new instance of this class, use CAE::LaminateDynamicSimCollection::CreateDynamicSimBuilder Created in NX9.0.0. More...
class	LaminateDynamicSimCollection
	Represents a collection of laminate dynamic sims To obtain an instance of this class, refer to CAE::LaminateManager Created in NX9.0.0. More...
class	LaminateElementFilterBuilder
	Represents a CAE::LaminateGraphicalReport builder There is no kf creator. More...
class	LaminateExtrudeSetup
	Extrude Setup To create or edit an instance of this class, use CAE::LaminateExtrudeSetupBuilder Created in NX6.0.4. More...
class	LaminateExtrudeSetupBuilder
	Represents a @link CAE::LaminateExtrudeSetup CAE::LaminateExtrudeSetup@endlink builder <br> To create a new instance of this class, use @link CAE::LaminateGlobalLayupMgr::CreateLaminateExtrudeSetupBuilder CAE::LaminateGlobalLayupMgr::CreateLaminateExtrudeSetupBuilder @endlink <br> Default values. More...
class	LaminateExtrudeSetupCollection
	Represents a collection of laminate extrusion setups To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0. More...
class	LaminateFiberOrientationOptions
	Laminate Fiber Orientation Options To create or edit an instance of this class, use CAE::LaminateFiberOrientationOptionsBuilder Created in NX7.5.0. More...
class	LaminateFiberOrientationOptionsBuilder
	Represents a CAE::LaminateFiberOrientationOptions builder To create a new instance of this class, use CAE::LaminateGlobalLayup::CreateFiberOrientationOptionsBuilder Created in NX7.5.0. More...
class	LaminateFillSetupBuilder
	Represents a CAE::LaminateFillSetupBuilder builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateFillSetupBuilder Created in NX7.5.2. More...
class	LaminateGlobalLayup
	Represent a global layup in the ply based modeling. More...
class	LaminateGlobalLayupCollection
	Represents a global layup, which is defined by a sequence of CAE::LaminateGlobalLayup , each with a name and a list of plies. More...
class	LaminateGlobalLayupMgr
	Represent the laminate global layup manager which manages all the global layups in the laminate ply-based modeling project To obtain an instance of this class, refer to CAE::FEModel Created in NX6.0.0. More...
class	LaminateGlobalLayupPlyGroupCollection
	Represents a laminate layup in the global layup context (ply based modeling), which is defined by a sequence of CAE::LaminatePlyGroup , each with a name and a list of plies. More...
class	LaminateGraphicalReport
	Represents a laminate graphical report There is no kf creator. More...
class	LaminateGraphicalReportBuilder
	Represents a CAE::LaminateGraphicalReport builder There is no kf creator. More...
class	LaminateGraphicalReportCollection
	Represents a collection of CAE::LaminateGraphicalReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0. More...
class	LaminateImportedLayupBuilder
	Represents a @link CAE::LaminateImportedLayupBuilder CAE::LaminateImportedLayupBuilder@endlink builder <br> To create a new instance of this class, use @link CAE::LaminateGlobalLayupMgr::CreateLaminateImportedLayupBuilder CAE::LaminateGlobalLayupMgr::CreateLaminateImportedLayupBuilder @endlink <br> Default values. More...
class	LaminateLayupOffset
	laminate layup offset More...
class	LaminateLayupOffsetBuilder
	Represents a CAE::LaminateLayupOffset builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLayupOffsetBuilder Created in NX7.5.0. More...
class	LaminateLayupOffsetCollection
	Represents a collection of layup offset rules To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0. More...
class	LaminateLockAngleBuilder
	Represents a builder To create a new instance of this class, use CAE::LaminateGlobalLayup::CreateLockAngleBuilder Created in NX7.5.0. More...
class	LaminateManager
	Represents the laminate manager that contains all laminate post report setups To obtain an instance of this class, refer to CAE::SimSimulation Created in NX8.0.0. More...
class	LaminateMatOrientation
	Laminate Material Orientation To create or edit an instance of this class, use CAE::LaminateMatOrientationBuilder Created in NX7.5.0. More...
class	LaminateMatOrientationBuilder
	Represents a CAE::LaminateMatOrientation builder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateMatOrientationBuilder Created in NX7.5.0. More...
class	LaminateMatOrientationCollection
	Represents a collection of layup growth rules To obtain an instance of this class, refer to CAE::LaminateGlobalLayupMgr Created in NX7.5.0. More...
class	LaminateMetaSol
	Deprecated. More...
class	LaminateMetaSolBuilder
	Represents a @link CAE::LaminateMetaSol CAE::LaminateMetaSol@endlink builder <br> To create a new instance of this class, use @link CAE::SimSimulation::CreateLaminateMetaSolBuilder CAE::SimSimulation::CreateLaminateMetaSolBuilder @endlink <br> Default values. More...
class	LaminateModeProperty
	Represents the properties of one normal mode Created in NX9.0.0. More...
class	LaminateModePropertyCollection
	Represents a collection of laminate mode properties To obtain an instance of this class, refer to CAE::LaminateDynamicSim Created in NX9.0.0. More...
class	LaminatePly
	Represents one ply in a laminate layup. More...
class	LaminatePlyCollection
	Represents a list of plies, which have a material, a thickness, an orientation, and a color. More...
class	LaminatePlyFilterBuilder
	Represents a CAE::LaminatePlyFilterBuilder There is no kf creator. More...
class	LaminatePlyGroup
	Represents one ply group in a laminate layup. More...
class	LaminatePlyGroupCollection
	Represents a laminate layup, which is defined by a sequence of CAE::LaminatePlyGroup , each with a name and a list of plies. More...
class	LaminatePlyMaxThicknessVarBuilder
	Builder used to modify the ply maximum accepted thickness variation for laminate fill To create a new instance of this class, use CAE::LaminatePly::CreateLaminatePlyMaxThicknessVarBuilder Created in NX8.5.0. More...
class	LaminatePostReport
	Represents an advanced post reporting setup for laminate results. More...
class	LaminatePostReportBuilder
	Represents a CAE::LaminatePostReport builder There is no kf creator. More...
class	LaminatePostReportCollection
	Represents a collection of laminate post reports To obtain an instance of this class, refer to CAE::LaminateManager Created in NX8.0.0. More...
class	LaminateQuickPostReport
	Laminate quick post summary report. More...
class	LaminateQuickPostReportBuilder
	Represents a @link CAE::LaminateQuickPostReport CAE::LaminateQuickPostReport@endlink builder <br> To create a new instance of this class, use @link CAE::SimSimulation::CreateLaminateQuickPostReportBuilder CAE::SimSimulation::CreateLaminateQuickPostReportBuilder @endlink <br> Default values. More...
class	LaminateQuickReport
	Represents a laminate quick report There is no kf creator. More...
class	LaminateQuickReportBuilder
	Represents a CAE::LaminateQuickReport builder There is no kf creator. More...
class	LaminateQuickReportCollection
	Represents a collection of CAE::LaminateQuickReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0. More...
class	LaminateRandomEvent
	The Laminate Dynamic Event. More...
class	LaminateRandomEventBuilder
	Represents a CAE::LaminateRandomEvent builder To create a new instance of this class, use CAE::LaminateDynamicEventCollection::CreateRandomEventBuilder Created in NX9.0.0. More...
class	LaminateSelectEntitiesBuilder
	Represents a CAE::LaminateSelectEntitiesBuilder To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateLaminateSelectEntitiesBuilder Created in NX7.5.2. More...
class	LaminateSpreadsheetReport
	Represents a laminate spreadsheet report There is no kf creator. More...
class	LaminateSpreadsheetReportBuilder
	Represents a CAE::LaminateSpreadsheetReport builder There is no kf creator. More...
class	LaminateSpreadsheetReportCollection
	Represents a collection of CAE::LaminateSpreadsheetReport To obtain an instance of this class, refer to CAE::LaminatePostReport Created in NX8.0.0. More...
class	LaminateViewDrapingResultsBuilder
	Represents the builder for the draping results viewer To create a new instance of this class, use CAE::LaminateGlobalLayupMgr::CreateViewDrapingResultsBuilder Created in NX6.0.0. More...
class	Loadcase
	Represents loadcases present in a CAE::Result . More...
class	LocalRemeshBuilder
	Represents a @link CAE::LocalRemeshBuilder CAE::LocalRemeshBuilder@endlink <br> To create a new instance of this class, use @link CAE::MeshManager::CreateLocalRemeshBuilder CAE::MeshManager::CreateLocalRemeshBuilder @endlink <br> Default values. More...
class	LumpedMassEADBuilder
	This class provides LumpedMass Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateLumpedMassEadBuilder CAE::NodeElementManager::CreateLumpedMassEadBuilder @endlink <br> Default values. More...
class	ManualMorphBuilder
	Represents a CAE::ManualMorphBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateManualMorphBuilder Created in NX9.0.0. More...
class	ManualSweepBetweenListItemSelection
	Represents a CAE::ManualSweepBetweenListItemSelection To create a new instance of this class, use CAE::ManualSweepBetweenSelection::CreateNewListItem Created in NX7.5.2. More...
class	ManualSweepBetweenListItemSelectionList
	Represents a list of objects. More...
class	ManualSweepBetweenSelection
	Builder for creating Manual Hex Mesh - Face Dependency type. More...
class	MappedHole
	Represents a CAE mapped hole. More...
class	MappedMesh
	Represents Mesh Recipe To create or edit an instance of this class, use CAE::MappedMeshBuilder Created in NX5.0.0. More...
class	MappedMeshBuilder
	Represents a Mapped Mesh Builder. More...
class	MappedResult
	Represents analysis results for a imported solver results file. More...
class	MaterialOptions
	Represents the material options to be used when assigning a material to cae part. More...
class	MechanicalLoadSumBuilder
	Represents a CAE::MechanicalLoadSumBuilder To create a new instance of this class, use CAE::ModelCheckManager::CreateMechanicalLoadSumBuilder Created in NX5.0.1. More...
class	Mesh
	Represents a Mesh. More...
class	Mesh0d
	Represents 0d Mesh To create or edit an instance of this class, use CAE::Mesh0dBuilder Created in NX6.0.0. More...
class	Mesh0dBuilder
	Represents 0D Mesh Used to create a CAE::Mesh0d To create a new instance of this class, use CAE::MeshManager::CreateMesh0dBuilder Created in NX6.0.0. More...
class	Mesh1d
	Represents 1d Mesh To create or edit an instance of this class, use CAE::Mesh1dBuilder Created in NX6.0.0. More...
class	Mesh1dBuilder
	Represents 1d Mesh Used to create a CAE::Mesh1d To create a new instance of this class, use CAE::MeshManager::CreateMesh1dBuilder Created in NX6.0.0. More...
class	Mesh2d
	Represents 2d Mesh This is an abstract class Created in NX6.0.0. More...
class	Mesh2dBuilder
	Represents 2D Mesh Used to create a CAE::Mesh2d To create a new instance of this class, use CAE::MeshManager::CreateMesh2dBuilder Created in NX6.0.0. More...
class	Mesh2dFree
	Represents 2d Mesh To create or edit an instance of this class, use CAE::Mesh2dBuilder Created in NX6.0.0. More...
class	Mesh3d
	Represents 3d Mesh To create or edit an instance of this class, use CAE::Mesh3dTetBuilder Created in NX6.0.0. More...
class	Mesh3dHexBuilder
	Represents 3D Hex Mesh Used to create a CAE::SweptMesh To create a new instance of this class, use CAE::MeshManager::CreateMesh3dHexBuilder Created in NX6.0.0. More...
class	Mesh3dTetBuilder
	Represents 3D Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use CAE::MeshManager::CreateMesh3dTetBuilder Created in NX6.0.0. More...
class	MeshCollector
	Represents a MeshCollector. More...
class	MeshCollectorBuilder
	Represents a CAE::MeshCollectorBuilder To create a new instance of this class, use CAE::MeshManager::CreateCollectorBuilder Created in NX5.0.0. More...
class	MeshCollectorDisplayDefaults
	Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and MeshCollectorOccurrence classes. More...
class	MeshCollectorDisplayDefaults0d
	Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshCollectorDisplayDefaults1d
	Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshCollectorDisplayDefaults2d
	Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshCollectorDisplayDefaults3d
	Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshCollectorOccurrence
	Represents a MeshCollector Occurrence. More...
class	MeshCollectorOccurrenceBuilder
	Represents a CAE::MeshCollectorOccurrenceBuilder To create a new instance of this class, use CAE::MeshManagerOccurrence::CreateOccurrenceBuilder Created in NX5.0.0. More...
class	MeshControl
	Represents a MeshControl. More...
class	MeshControlBuilder
	Represents a @link CAE::MeshControl CAE::MeshControl@endlink <br> To create a new instance of this class, use @link CAE::MeshControlCollection::CreateBuilder CAE::MeshControlCollection::CreateBuilder @endlink <br> Default values. More...
class	MeshControlCollection
	Provides methods for managing mesh controlsCAE::MeshControl in a fem part. More...
class	MeshControlDisplayManager
	Provides method for creating builder for mesh control display operation commands in both sim and fem part. More...
class	MeshControlDisplayOptionsBuilder
	Represents a CAE::MeshControlDisplayOptionsBuilder To create a new instance of this class, use CAE::MeshControlDisplayManager::CreateBuilder Created in NX5.0.0. More...
class	MeshDisplaySettings
	Represents the base MeshDisplaySettings class for Mesh class. More...
class	MeshDisplaySettings0d
	Represents 0d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshDisplaySettings1d
	Represents 1d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshDisplaySettings2d
	Represents 2d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshDisplaySettings3d
	Represents 3d Mesh Display Settings To obtain an instance of this class use CAE::Mesh, CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes Created in NX8.5.0. More...
class	MeshFollower
	Represents Mesh Recipe This is an abstract class Created in NX7.5.0. More...
class	MeshFromBoundaryBuilder
	Represents a @link CAE::MeshFromBoundaryBuilder CAE::MeshFromBoundaryBuilder@endlink <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateMeshFromBoundaryBuilder CAE::NodeElementManager::CreateMeshFromBoundaryBuilder @endlink <br> Created in NX9.0.0. More...
class	MeshManager
	Creates MeshesCAE::Mesh in a fem part. More...
class	MeshManagerOccurrence
	Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part. More...
class	MeshMate
	Represents a Mesh Mate. More...
class	MeshPoint
	Represents a smart MeshPoint . More...
class	MeshPointCollection
	Provides methods for managing constraints CAE::MeshPoint in a sim part. More...
class	MeshPointConicCenterBuilder
	Represents a CAE::MeshPointConicCenterBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointConicCenterBuilder Created in NX5.0.2. More...
class	MeshPointExistingPointBuilder
	Represents a CAE::MeshPointExistingPointBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointExistingPointBuilder Created in NX5.0.2. More...
class	MeshPointMultipleOnCurveBuilder
	Represents a CAE::MeshPointMultipleOnCurveBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointMultipleOnCurveBuilder Created in NX5.0.2. More...
class	MeshPointOnCurveBuilder
	Represents a CAE::MeshPointOnCurveBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointOnCurveBuilder Created in NX5.0.2. More...
class	MeshPointOnFaceBuilder
	Represents a CAE::MeshPointOnFaceBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointOnFaceBuilder Created in NX5.0.2. More...
class	MeshPointProjectBuilder
	Represents a CAE::MeshPointProjectBuilder To create a new instance of this class, use CAE::MeshPointCollection::CreateMeshpointProjectBuilder Created in NX5.0.2. More...
class	MeshShellFromSolid
	Represents 2d Mesh that follows 3d mesh To create or edit an instance of this class, use CAE::SurfaceCoatBuilder Created in NX7.5.0. More...
class	MMCCreateBuilder
	Represents a CAE::MMCCreateBuilder which can be used to create or edit CAE::MeshMate objects. More...
class	ModelCheckManager
	Provides method for creating builder for node element operation commands in a fem part. More...
class	ModelDisplayBuilder
	This class provides Model Display Data Support <br> To create a new instance of this class, use @link CAE::CaePart::CreateModelDisplayBuilder CAE::CaePart::CreateModelDisplayBuilder @endlink <br> Default values. More...
class	ModelingObjectPropertyTable
	Represents a Modeling Object Property Table. More...
class	ModelingObjectPropertyTableCollection
	Creates Modeling Object property tablesCAE::ModelingObjectPropertyTable in a fem model. More...
class	ModelUpdateCorrelMethodBuilder
	Represents a CAE::ModelUpdateCorrelMethodBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateCorrelMethodBuilder Created in NX7.5.0. More...
class	ModelUpdateDesignVariable
	Represents a CAE::ModelUpdateDesignVariable , which is a meta-solution used to update finite element models to match real life test data Created in NX8.0.1. More...
class	ModelUpdateDesignVariablesCollection
	Represents a collection of durability events. More...
class	ModelUpdateDesignVariablesRapidCreateBuilder
	This class is the builder that is used for the rapid creation of design variables. More...
class	ModelUpdateOptimOptionsBuilder
	Represents a CAE::ModelUpdateOptimOptionsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOptimOptionsBuilder Created in NX7.5.0. More...
class	ModelUpdateOptionsBuilder
	Represents a CAE::ModelUpdateOptionsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOptionsBuilder Created in NX7.5.0. More...
class	ModelUpdateOverallWeightsBuilder
	Represents a CAE::ModelUpdateOverallWeightsBuilder To create a new instance of this class, use CAE::ModelUpdateSolution::CreateOverallWeightsBuilder Created in NX7.5.0. More...
class	ModelUpdateSensitivityViewerBuilder
	Represents CAE::ModelUpdateSensitivityViewerBuilder To create a new instance of this class, use CAE::ModelUpdateSolutionCollection::CreateSensitivityViewerBuilder Created in NX6.0.0. More...
class	ModelUpdateSolution
	Represents a CAE::ModelUpdateSolution , which is a meta-solution used to update finite element models to match real life test data To create or edit an instance of this class, use CAE::ModelUpdateSolutionBuilder Created in NX7.5.0. More...
class	ModelUpdateSolutionBuilder
	Represents a CAE::ModelUpdateSolutionBuilder To create a new instance of this class, use CAE::ModelUpdateSolutionCollection::CreateSolutionBuilder Created in NX7.5.0. More...
class	ModelUpdateSolutionCollection
	Represents a collection of model update meta solution To obtain an instance of this class, refer to CAE::CorrelManager More...
class	ModifiableFEModelOccAttribute
	This class represents an Interface to the Finite Element Model. More...
class	MultipleElementCreateBuilder
	Represents a CAE::MultipleElementCreateBuilder which can be used to create mutiple elements in one efficient opertation. More...
class	MultipleNodeCreateBuilder
	Represents a CAE::MultipleNodeCreateBuilder which can be used to create mutiple nodes in one efficient opertation. More...
class	NamedPropertyTable
	Represents a CAE::NamedPropertyTable which is a superclass to CAE::PhysicalPropertyTable. More...
class	NamedPropTableWithTargetSet
	Represents a Solver Specific Modeling Object with associated target set(s) More...
class	NodeAlignBuilder
	Represents a CAE::NodeAlignBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeAlignBuilder Created in NX5.0.0. More...
class	NodeAssociationBuilder
	Represents a CAE::NodeAssociationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeAssociationBuilder Created in NX9.0.0. More...
class	NodeCreateBuilder
	Represents a CAE::NodeCreateBuilder . More...
class	NodeDeleteBuilder
	Represents a CAE::NodeDeleteBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeDeleteBuilder Created in NX5.0.0. More...
class	NodeDissociationBuilder
	Represents a CAE::NodeDissociationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeDissociationBuilder Created in NX9.0.0. More...
class	NodeElementInfoBuilder
	Represents a CAE::NodeElementInfoBuilder To create a new instance of this class, use CAE::NodeElementInfoManager::CreateNodeElementInfoBuilder Created in NX5.0.0. More...
class	NodeElementInfoManager
	Provides method for creating builder for node element info operation commands in both sim and fem part. More...
class	NodeElementManager
	Provides method for creating builder for node element operation commands in a fem part. More...
class	NodeModifyLabelBuilder
	Represents a CAE::NodeModifyLabelBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeModifyLabelBuilder Created in NX5.0.0. More...
class	NodeModifyLocationBuilder
	Represents a CAE::NodeModifyLocationBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeModifyLocationBuilder Created in NX5.0.0. More...
class	NodeProjectBuilder
	Represents a CAE::NodeProjectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeProjectBuilder Created in NX8.5.0. More...
class	NodeReflectBuilder
	Represents a CAE::NodeReflectBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeReflectBuilder Created in NX5.0.0. More...
class	NodeRotateBuilder
	Represents a CAE::NodeRotateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeRotateBuilder Created in NX5.0.0. More...
class	NodesBetweenNodesBuilder
	Represents a CAE::NodesBetweenNodesBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesBetweenNodesBuilder Created in NX5.0.0. More...
class	NodesOnCurveBuilder
	Represents a CAE::NodesOnCurveBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesOnCurveBuilder Created in NX5.0.0. More...
class	NodesRepositionBuilder
	Represents a CAE::NodesRepositionBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodesRepositionBuilder Created in NX6.0.2. More...
class	NodeTranslateBuilder
	Represents a CAE::NodeTranslateBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateNodeTranslateBuilder Created in NX5.0.0. More...
class	NxBcPlotContours
	Represents a CAE::NxBcPlotContours object returned from CAE::SimBcPlotContoursBuilder::CreatePlotObject in CAE::SimBcPlotContoursBuilder . More...
class	OneDimensionalElementSplitBuilder
	Represents a CAE::OneDimensionalElementSplitBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateOneDimensionalElementSplitBuilder Created in NX8.5.0. More...
class	OptimizerAutotest
	Represents a class that is used for NX CAE Optimizer testing. More...
class	PhysicalPropertyTable
	Represents a Physical Property Table. More...
class	PhysicalPropertyTableCollection
	Creates physical property tablesCAE::PhysicalPropertyTable in a fem model. More...
class	PolygonFaceOnMeshBuilder
	Builder for creating Polygon Face On Mesh To create a new instance of this class, use CAE::AbstractionManager::CreatePolygonFaceOnMeshBuilder Created in NX7.5.2. More...
class	Post
	Represents Post-Processing To obtain an instance of this class, refer to Session Created in NX5.0.0. More...
class	PostAnnotation
	Controls appearance of a annoation object in a postview. More...
class	PostGraph
	This class provides interfaces to query graph attributes An instance of this class can not be obtained Created in NX9.0.0. More...
class	PostGraphAcrossIterationsBuilder
	Represents a @link CAE::PostGraphAcrossIterationsBuilder CAE::PostGraphAcrossIterationsBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0. More...
class	PostGraphAlongPathBuilder
	Represents a @link CAE::PostGraphAlongPathBuilder CAE::PostGraphAlongPathBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0. More...
class	PostGraphBuilder
	Represents a @link CAE::PostGraphBuilder CAE::PostGraphBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0. More...
class	PostGraphOrbitBuilder
	Represents a @link CAE::PostGraphOrbitBuilder CAE::PostGraphOrbitBuilder@endlink <br> This is an abstract class and cannot be instantiated <br> Created in NX9.0.0. More...
class	PostJtExportBuilder
	Represents a CAE::PostJtExportBuilder used for exporting JTs of Result Types in Post Processing To create a new instance of this class, use CAE::ResultManager::CreatePostJtBuilder Created in NX8.5.0. More...
class	PreTestDofSet
	Represents Dof Set within a pre-test setup To create or edit an instance of this class, use CAE::PreTestDofSetBuilder Created in NX7.5.0. More...
class	PreTestDofSetBuilder
	Represents a CAE::PreTestDofSet builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreatePretestDofsetBuilder Created in NX7.5.0. More...
class	PreTestExciterConfig
	Represent a exciter selection configuration To create or edit an instance of this class, use CAE::PreTestExciterConfigBuilder Created in NX8.0.0. More...
class	PreTestExciterConfigBuilder
	Represents a @link CAE::PreTestExciterConfig CAE::PreTestExciterConfig@endlink builder <br> To create a new instance of this class, use @link CAE::PreTestSolutionCollection::CreateExciterConfigBuilder CAE::PreTestSolutionCollection::CreateExciterConfigBuilder @endlink <br> Default values. More...
class	PreTestExciterConfigCollection
	Represents a collection of exciter selection configuration To obtain an instance of this class, refer to CAE::PreTestExciterSelectionControl Created in NX8.0.0. More...
class	PreTestExciterSelectionControl
	Represents a pre-test exciter selection setup To obtain an instance of this class, refer to CAE::PreTestSolution Created in NX8.0.0. More...
class	PreTestExciterSelectionDofSetCollection
	Represents a collection of exciter selection configuration. More...
class	PreTestExportUnvBuilder
	This is a manager to the CAE::PreTestExportUnvBuilder class. More...
class	PreTestSensorConfig
	Represent a sensor selection configuration To create or edit an instance of this class, use CAE::PreTestSensorConfigBuilder Created in NX7.5.0. More...
class	PreTestSensorConfigBuilder
	Represents a @link CAE::PreTestSensorConfig CAE::PreTestSensorConfig@endlink builder <br> To create a new instance of this class, use @link CAE::PreTestSolutionCollection::CreateSensorConfigBuilder CAE::PreTestSolutionCollection::CreateSensorConfigBuilder @endlink <br> Default values. More...
class	PreTestSensorConfigCollection
	Represents a collection of sensor selection configuration To obtain an instance of this class, refer to CAE::PreTestSensorSelectionControl Created in NX7.5.0. More...
class	PreTestSensorSelectionControl
	Represents a pre-test sensor selection setup To obtain an instance of this class, refer to CAE::PreTestSolution Created in NX7.5.0. More...
class	PreTestSensorSelectionDofSetCollection
	Represents a collection of sensor selection configuration. More...
class	PreTestSolution
	Represents a pre-test setup To create or edit an instance of this class, use CAE::PreTestSolutionBuilder Created in NX7.5.0. More...
class	PreTestSolutionBuilder
	Represents a CAE::PreTestSolution builder To create a new instance of this class, use CAE::PreTestSolutionCollection::CreatePretestBuilder Created in NX7.5.0. More...
class	PreTestSolutionCollection
	Represents a collection of pre-test setups To obtain an instance of this class, refer to CAE::CorrelManager Created in NX7.5.0. More...
class	PrimitiveMesh
	Represents Primitive Mesh To create or edit an instance of this class, use CAE::PrimitiveMeshBuilder Created in NX7.5.0. More...
class	PrimitiveMeshBuilder
	Represents Primitive Mesh Used to create a CAE::Mesh To create a new instance of this class, use CAE::MeshManager::CreatePrimitiveMeshBuilder Created in NX7.5.1. More...
class	ProjectNodesToCadGeometryBuilder
	Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance, and if requested this builder can adjust the node locations to put them back on to the underlying Cad geometry. More...
class	PropertyTable
	Represents a property table. More...
class	ReassignElementsBuilder
	Represents a CAE::ReassignElementsBuilder To create a new instance of this class, use CAE::MeshManager::CreateReassignElementsBuilder Created in NX5.0.0. More...
class	RelatedElemEdgeMethod
	Represents the output from the related element edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	RelatedElemFaceMethod
	Represents the output from the related element face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	RelatedElemMethod
	Represents the output from the related element smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	RelatedFaceMethod
	Represents the output from the related face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	RelatedNodeMethod
	Represents the output from the related node smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	Result
	This class provides interfaces to query analysis results. More...
class	ResultAccess
	Represents a specific result state for a given CAE::Result . More...
class	ResultManager
	Manages results To obtain an instance of this class, refer to Session Created in NX6.0.2. More...
class	ResultMeasure
	Represents a ResultMeasure class CAE::ResultMeasure . More...
class	ResultMeasureCollection
	Provides methods for managing ResultMeasures CAE::ResultMeasure. More...
class	ResultMeasureModelSubset
	Represents a a subset of the model upon which to calculate results This is an abstract class, and cannot be created. More...
class	ResultMeasureModelSubsetFE
	Represents a FE-based subset of the model upon which to calculate results To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureModelSubsetGeom
	Represents a geometry-based subset of the model upon which to calculate results To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureResultAllOptions
	Represents the combination of all result options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureResultDirectionOptions
	Represents the result directional options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureResultDirectionSectionOptions
	Represents the result directional and beam/shell section options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureResultOptions
	Represents the basic result options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultMeasureResultSectionOptions
	Represents the result with beam/shell section options for result measure To obtain an instance of this class use CAE::ResultMeasureCollection . More...
class	ResultParameters
	This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two CAE::ResultAccess objects. More...
class	ResultsCombinationBuilder
	Represents a CAE::ResultsCombinationBuilder To obtain an instance of this class use Session::ResultManager . More...
class	ResultsEnvelopeBuilder
	Represents a CAE::ResultsEnvelopeBuilder To obtain an instance of this class use Session::ResultManager . More...
class	ResultsManipulationBuilder
	Represents an abstract CAE::ResultsManipulationBuilder This is an abstract class and cannot be instantiated Created in NX7.5.2. More...
class	ResultsModelExportBuilder
	Represents a CAE::ResultsModelExportBuilder To obtain an instance of this class use Session::ResultManager . More...
class	ResultsReductionBuilder
	Represents a CAE::ResultsReductionBuilder To obtain an instance of this class use Session::ResultManager . More...
class	ResultType
	This class represents a result type from a result file. More...
class	SelectCAEBody
	Represents a single object selection. More...
class	SelectCAEBodyList
	Represents a list of objects on a selection list. More...
class	SelectCAEEdge
	Represents a single object selection. More...
class	SelectCAEEdgeList
	Represents a list of objects on a selection list. More...
class	SelectCAEFace
	Represents a single object selection. More...
class	SelectCAEFaceList
	Represents a list of objects on a selection list. More...
class	SelectElementsBuilder
	Represents a CAE::SelectElementsBuilder To create a new instance of this class, use CAE::SelectElementsManager::CreateSelectElementsBuilder Created in NX5.0.0. More...
class	SelectElementsManager
	Provides method for creating builder for select element operation commands in both fem and sim part. More...
class	SelectFEElemFaceList
	Represents a list of objects on a selection list. More...
class	SelectFENode
	Represents a single object selection. More...
class	SelectFENodeList
	Represents a list of objects on a selection list. More...
class	SelectMeshList
	Represents a list of objects on a selection list. More...
class	SetManager
	Represents a group of CAE object sets. More...
struct	SetObject
	Structure used to pass objects into SetManager and CAESet. More...
class	ShapeMetricViewerBuilder
	Represents the correlation Shape metrics viewer builder To create a new instance of this class, use CAE::CorrelSolutionCollection::CreateShapeMetricViewerBuilder Created in NX7.5.0. More...
class	Shell2SolidBuilder
	Represents 3D Tet Mesh Used to create a CAE::Mesh3d To create a new instance of this class, use CAE::MeshManager::CreateShell2solidBuilder Created in NX6.0.0. More...
class	ShellEADBuilder
	This class provides Shell Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateShellEadBuilder CAE::NodeElementManager::CreateShellEadBuilder @endlink <br> Default values. More...
class	ShowAdjacentBuilder
	Represents a CAE::ShowAdjacentBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowAdjacentBuilder Created in NX5.0.0. More...
class	ShowHideBuilder
	Represents a CAE::ShowHideBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowHideBuilder Created in NX5.0.0. More...
class	ShowHideManager
	Provides method for creating builder for Show Hide operation commands in a fem/sim part. More...
class	ShowOnlyBuilder
	Represents a CAE::ShowOnlyBuilder To create a new instance of this class, use CAE::ShowHideManager::CreateShowOnlyBuilder Created in NX5.0.0. More...
class	SimAutoBcRecipe
	Represents a simulation recipe containing the parameters needed for the generation of a set of face pairs from the faces/bodies in the model. More...
class	SimBC
	Represents BC class which is a superclass to CAE::SimLoad and CAE::SimConstraint. More...
class	SimBCBuilder
	This is a manager to the CAE::SimBC class. More...
class	SimBCDisplay
	Represents a BC display attributes. More...
class	SimBcGroup
	Represents a BC group in a solution or solution step. More...
class	SimBcPlotContoursBuilder
	Represents a CAE::SimBcPlotContoursBuilder builder which can be used to generate a plot of a CAE::SimBC in the graphics area. More...
class	SimBcXyPlotBuilder
	Represents a CAE::SimBcXyPlotBuilder builder which can be used to generate a XY plot of a CAE::SimBC in the graphics area. More...
class	SimCondition
	This class represents a Condition which defines a state where all or some values of CAE::SimConditionParam are known. More...
class	SimConditionCollection
	This class is a collection of CAE::SimCondition . More...
class	SimConditionParam
	This class represents a named measurable quantity. More...
class	SimConditionParamCollection
	This class is a collection of CAE::SimConditionParam which represents a measurable environment. More...
class	SimConditionSeqMgr
	This is the manager for Condition Sequences. More...
class	SimConditionSequence
	This class represents a time history of CAE::SimCondition . More...
class	SimConditionSequenceCollection
	This class is a collection of CAE::SimConditionSequence . More...
class	SimConditionTimeStep
	This class represents a step in the time history of a CAE::SimConditionSequence . More...
class	SimConditionTimeStepCollection
	This class is a collection of CAE::SimConditionTimeStep . More...
class	SimConstraint
	Represents a constraint. More...
class	SimConstraintCollection
	Provides methods for managing constraints CAE::SimConstraint in a sim part. More...
class	SimConstraintGroup
	Represents a constraint group in a solution or solution step. More...
class	SimGroupContainer
	Represents UGS::CaeSim::LbcGroupContainer. More...
class	SimLbcFolder
	Represents a folder object in the .sim files. More...
class	SimLbcFolderCollection
	Provides methods for managing LbcFolders CAE::SimLbcFolder in a sim part. More...
class	SimLoad
	Represents a load. More...
class	SimLoadCollection
	Provides methods for managing loads CAE::SimLoad in a sim part. More...
class	SimLoadGroup
	Represents a load group in a solution or solution step. More...
class	SimMotionLoadsBuilder
	Represents a CAE::SimMotionLoadsBuilder To create a new instance of this class, use CAE::SimSimulation::CreateMotionLoadsBuilder Created in NX5.0.1. More...
class	SimMotionLoadsListItemBuilder
	Represents a CAE::SimMotionLoadsListItemBuilder To create a new instance of this class, use CAE::SimSimulation::CreateMotionLoadsListItemBuilder Created in NX5.0.1. More...
class	SimPart
	Represents an NX part of type .sim. More...
class	SimRecipe
	This is an abstract class. More...
class	SimRecipeCollection
	Provides methods for managing CAE::SimRecipe in a sim part. More...
class	SimSimulation
	This is the root object in a .sim file. More...
class	SimSimulationObject
	Represents a simulation object. More...
class	SimSimulationObjectCollection
	Provides methods for managing simulation objects CAE::SimSimulationObject in a sim part. More...
class	SimSimulationObjectGroup
	Represents a simulation object group in a solution or solution step. More...
class	SimSolution
	Represents a solution in the .sim files. More...
class	SimSolutionCollection
	Provides methods for managing Solutions CAE::SimSolution in a CAE::SimSimulation. More...
class	SimSolutionStep
	Represents a subcase/step in a solution. More...
class	SketchCurves
	Represents a Beam Cross Section This is an abstract class Created in NX7.5.0. More...
class	SketchCurvesCollection
	Represents the collection of all CAE::SketchCurves in a fem part. More...
class	SliverFaceMethod
	Represents the output from the sliver face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	SmartSelectionManager
	Provides methods for creating smart selection methods in a cae part. More...
class	SolidPropertyCheckBuilder
	Represents a CAE::SolidPropertyCheckBuilder To create a new instance of this class, use CAE::ModelCheckManager::CreateSolidPropertyCheckBuilder Created in NX5.0.1. More...
class	SolutionResult
	Represents analysis results for a given CAE::SimSolution . More...
class	SolverAppendOption
	This class provides access to the append option setting for importing solver specific data into existing Fem/Sim. More...
class	SpiderElementBuilder
	Represents a CAE::SpiderElementBuilder To create a new instance of this class, use CAE::NodeElementManager::CreateSpiderElementBuilder Created in NX5.0.1. More...
class	SpringEADBuilder
	This class provides Spring Associated Data Support <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateSpringEadBuilder CAE::NodeElementManager::CreateSpringEadBuilder @endlink <br> Default values. More...
class	StandardBeamSection
	Represents a Standard Beam Cross Section To create or edit an instance of this class, use CAE::StandardBeamSectionBuilder Created in NX7.5.0. More...
class	StandardBeamSectionBuilder
	Represents a CAE::StandardBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateStandardBeamSectionBuilder Created in NX7.5.0. More...
class	SuppressHoleBuilder
	Builder for creating Hole Suppression Hole <br> To create a new instance of this class, use @link CAE::AbstractionManager::CreateSuppressHoleBuilder CAE::AbstractionManager::CreateSuppressHoleBuilder @endlink <br> Default values. More...
class	SurfaceCoatBuilder
	Builder for creating Surface Coat To create a new instance of this class, use CAE::MeshManager::CreateSurfaceCoatBuilder Created in NX6.0.1. More...
class	SweepBetweenMeshBuilder
	Builder for creating swept mesh between faces. More...
class	SweptMesh
	Represents swept Mesh To create or edit an instance of this class, use CAE::Mesh3dHexBuilder Created in NX6.0.0. More...
class	TangentContinuousEdgeMethod
	Represents the output from the circular edge smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX7.5.1. More...
class	TangentFaceMethod
	Represents the output from the tangent face smart selector method To obtain an instance of this class use CAE::SmartSelectionManager Created in NX6.0.0. More...
class	ThicknessBuilder
	Represents a CAE::ThicknessBuilder To create a new instance of this class, use CAE::NodeElementInfoManager::CreateThicknessBuilder Created in NX6.0.1. More...
class	ThicknessPlotContours
	Represents a CAE::ThicknessPlotContours object returned from CAE::ThicknessPlotContoursBuilder::CreatePlotObject in CAE::ThicknessPlotContoursBuilder . More...
class	ThicknessPlotContoursBuilder
	Represents a CAE::ThicknessPlotContoursBuilder builder which can be used to generate a plot of a CAE::SimBC in the graphics area. More...
class	TransientResultsReductionBuilder
	Represents a CAE::TransientResultsReductionBuilder To obtain an instance of this class use Session::ResultManager . More...
class	UnStitchEdgeBuilder
	Represents a CAE::UnStitchEdgeBuilder To create a new instance of this class, use CAE::FemPart::CreateUnStitchEdgeBuilder Created in NX6.0.0. More...
class	UserDefinedSolidBeamSection
	Represents a User-Defined Solid Beam Cross Section To create or edit an instance of this class, use CAE::UserDefinedSolidBeamSectionBuilder Created in NX7.5.0. More...
class	UserDefinedSolidBeamSectionBuilder
	Represents a CAE::UserDefinedSolidBeamSectionBuilder To create a new instance of this class, use CAE::BeamSectionCollection::CreateUserDefinedSolidBeamSectionBuilder Created in NX7.5.0. More...
class	ViewLaminateBuilder
	Represents a View Laminate Builder. More...
class	WeldBuilder
	Represents a CAE::WeldBuilder To create a new instance of this class, use CAE::MeshManager::CreateWeldBuilder Created in NX7.5.2. More...
class	WeldRow
	Represents a CAE weld row. More...

Enumerations
enum	CaeSetGroupFilterType {   CaeSetGroupFilterTypeNode, CaeSetGroupFilterTypeElement, CaeSetGroupFilterTypeGeomFace, CaeSetGroupFilterTypeGeomBody,   CaeSetGroupFilterTypeGeomCurve, CaeSetGroupFilterTypeGeomPoint, CaeSetGroupFilterTypePointElement, CaeSetGroupFilterTypeBeamElement,   CaeSetGroupFilterTypeShellElement, CaeSetGroupFilterTypeSolidElement, CaeSetGroupFilterTypeGeomPlanarFace, CaeSetGroupFilterTypeGeomCylFace,   CaeSetGroupFilterTypeBeamElementTypeBar, CaeSetGroupFilterTypeBeamElementTypeBeam, CaeSetGroupFilterTypeBeamElementTypeRod, CaeSetGroupFilterTypeBeamElementTypeBearing,   CaeSetGroupFilterTypeNodeAndElement, CaeSetGroupFilterTypeCaeGeometry, CaeSetGroupFilterTypeCaeMesh }
	Used to specify the filter to extract type of objects from a group e.g geometric face, element, node ..etc. More...
enum	CaeSetObjectSubType { CaeSetObjectSubTypeNone, CaeSetObjectSubTypeElementFace, CaeSetObjectSubTypeElementEdge, CaeSetObjectSubTypePart }
	Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc. More...
enum	CorrelShapemetrictype {   CorrelShapemetrictypeMac, CorrelShapemetrictypeComac, CorrelShapemetrictypeMsf, CorrelShapemetrictypeXortho,   CorrelShapemetrictypeNco, CorrelShapemetrictypeSco }
	shape Metric Code More...
enum	DisplaySectionType { DisplaySectionTypeNone, DisplaySectionTypeCurves, DisplaySectionTypeSolid }
	specifies the type of display for 1d element sections More...
enum	ElementNormalsType { ElementNormalsTypeNone, ElementNormalsTypeTails, ElementNormalsTypeVectors }
	specifies the type of display for 2d element normals More...
enum	MarkerType0d {   MarkerType0dNone, MarkerType0dPlus, MarkerType0dDot, MarkerType0dAsterisk,   MarkerType0dCircle, MarkerType0dPoundsign, MarkerType0dCross, MarkerType0dSquare,   MarkerType0dTriangle, MarkerType0dDiamond, MarkerType0dCenterLine, MarkerType0dFilledCircle,   MarkerType0dFilledSquare, MarkerType0dFilledSquareWithOneRing, MarkerType0dFilledSquareWithTwoRings, MarkerType0dTriangleInTriangle,   MarkerType0dFilledDiamond, MarkerType0dCircleInCircle, MarkerType0dCircleInSquare, MarkerType0dLargeFilledSquare,   MarkerType0dSquareInSquare, MarkerType0dThickCircle, MarkerType0dLargeBox }
	specifies the marker to use for the 0d element display More...
enum	RadiusType { RadiusTypeAllTypes, RadiusTypeInside, RadiusTypeOutside }
	Specify the radius point type. More...
enum	XyFunctionDataType {   XyFunctionDataTypeGeneral, XyFunctionDataTypeTime, XyFunctionDataTypeCrossSpectrum = 3, XyFunctionDataTypeFrequencyResponseFunction,   XyFunctionDataTypeTransmissibility, XyFunctionDataTypePowerSpectralDensity = 9, XyFunctionDataTypeSpectrum = 12, XyFunctionDataTypeShockResponseSpectrum = 24,   XyFunctionDataTypeTemperature = 31, XyFunctionDataTypeStressStrain, XyFunctionDataTypeLife, XyFunctionDataTypeCampbellDiagram,   XyFunctionDataTypeTimingChart, XyFunctionDataTypeStiffnessAndDamping }
	Defines the data type of a function in AFU file. More...
enum	XyFunctionGeneralType {   XyFunctionGeneralTypeGeneral, XyFunctionGeneralTypeTime, XyFunctionGeneralTypeSpectrum, XyFunctionGeneralTypePowerSpectralDensity,   XyFunctionGeneralTypeShockResponseSpectrum, XyFunctionGeneralTypeFrequencyResponseFunction, XyFunctionGeneralTypeTemperature, XyFunctionGeneralTypeStressStrain,   XyFunctionGeneralTypeLife, XyFunctionGeneralTypeCrossSpectrum, XyFunctionGeneralTypeTransmissibility, XyFunctionGeneralTypeCampbellDiagram,   XyFunctionGeneralTypeTimingChart, XyFunctionGeneralTypeStiffnessAndDamping }
	Defines general purpose type of a function. More...
enum	XyFunctionLoadType {   XyFunctionLoadTypeGeneral, XyFunctionLoadTypeTime, XyFunctionLoadTypeSpectrum, XyFunctionLoadTypePowerSpectralDensity,   XyFunctionLoadTypeShockResponseSpectrum }
	Defines load purpose type of a function. More...
enum	XyFunctionMacroType {   XyFunctionMacroTypeGeneral, XyFunctionMacroTypeMotion, XyFunctionMacroTypeResponse, XyFunctionMacroTypeLoad,   XyFunctionMacroTypeMaterial }
	Defines the application type of a function. More...
enum	XyFunctionMaterialType {   XyFunctionMaterialTypeGeneral, XyFunctionMaterialTypeTime, XyFunctionMaterialTypeTemperature, XyFunctionMaterialTypeStressStrain,   XyFunctionMaterialTypeLife }
	Defines material purpose type of a function. More...
enum	XyFunctionMeasure {   XyFunctionMeasureGeneral, XyFunctionMeasureDisplacement, XyFunctionMeasureForce, XyFunctionMeasureTemperature,   XyFunctionMeasureTime, XyFunctionMeasureFrequency, XyFunctionMeasureMass, XyFunctionMeasureVelocity,   XyFunctionMeasureAcceleration, XyFunctionMeasureAngularDisplacement, XyFunctionMeasureAngularVelocity, XyFunctionMeasureAngularAcceleration,   XyFunctionMeasureMoment, XyFunctionMeasurePressure, XyFunctionMeasureStress, XyFunctionMeasureStrain,   XyFunctionMeasureRpm, XyFunctionMeasureOrder, XyFunctionMeasureCycles, XyFunctionMeasureLoadfactor,   XyFunctionMeasureTorque, XyFunctionMeasureGravity, XyFunctionMeasureCurvature, XyFunctionMeasureElementForce,   XyFunctionMeasureElementMoment, XyFunctionMeasureMotorSignal, XyFunctionMeasureUnitlessScalar, XyFunctionMeasureUnitlessReal,   XyFunctionMeasureUnitlessInteger, XyFunctionMeasureVoltage, XyFunctionMeasureElectricCurrent, XyFunctionMeasureNumber }
	Defines measurement unit types. More...
enum	XyFunctionMotionType { XyFunctionMotionTypeTime, XyFunctionMotionTypeTimingChart, XyFunctionMotionTypeStiffnessAndDamping }
	Defines motion purpose type of a function. More...
enum	XyFunctionResponseType {   XyFunctionResponseTypeGeneral, XyFunctionResponseTypeTime, XyFunctionResponseTypeSpectrum, XyFunctionResponseTypePowerSpectralDensity,   XyFunctionResponseTypeShockResponseSpectrum, XyFunctionResponseTypeFrequencyResponseFunction, XyFunctionResponseTypeCrossSpectrum, XyFunctionResponseTypeTransmissibility }
	Defines response purpose type of a function. More...
enum	XyFunctionUnit {   XyFunctionUnitUnknown, XyFunctionUnitDisplacementM, XyFunctionUnitDisplacementMm, XyFunctionUnitDisplacementIn,   XyFunctionUnitDisplacementFt, XyFunctionUnitForceN, XyFunctionUnitForceMn, XyFunctionUnitForceBf,   XyFunctionUnitTemperatureC, XyFunctionUnitTemperatureF, XyFunctionUnitTemperatureK, XyFunctionUnitTimeSec,   XyFunctionUnitTimeMin, XyFunctionUnitTimeHour, XyFunctionUnitFrequencyHz, XyFunctionUnitMassKg,   XyFunctionUnitMassG, XyFunctionUnitMassBm, XyFunctionUnitMassTon, XyFunctionUnitMassLbfIn,   XyFunctionUnitVelocityM, XyFunctionUnitVelocityMm, XyFunctionUnitVelocityIn, XyFunctionUnitVelocityFt,   XyFunctionUnitAccelerationM, XyFunctionUnitAccelerationMm, XyFunctionUnitAccelerationIn, XyFunctionUnitAccelerationFt,   XyFunctionUnitAccelerationGs, XyFunctionUnitAngularDisplacementRadian, XyFunctionUnitAngularDisplacementDegree, XyFunctionUnitAngularVelocityRadian,   XyFunctionUnitAngularVelocityDegree, XyFunctionUnitAngularAccelerationRadian, XyFunctionUnitAngularAccelerationDegree, XyFunctionUnitMomentMnMm,   XyFunctionUnitMomentNMm, XyFunctionUnitMomentNM, XyFunctionUnitMomentBfIn, XyFunctionUnitMomentBfFt,   XyFunctionUnitPressureKpa, XyFunctionUnitPressureMpa, XyFunctionUnitPressurePa, XyFunctionUnitPressurePsi,   XyFunctionUnitPressureLbfFt, XyFunctionUnitPressureBar, XyFunctionUnitPressureAt, XyFunctionUnitStressKpa,   XyFunctionUnitStressMpa, XyFunctionUnitStressPa, XyFunctionUnitStressPsi, XyFunctionUnitStrainMm,   XyFunctionUnitStrainIn, XyFunctionUnitRpmRpm, XyFunctionUnitOrderOrder, XyFunctionUnitCyclesDuty,   XyFunctionUnitTorqueMnMm, XyFunctionUnitTorqueNMm, XyFunctionUnitTorqueNM, XyFunctionUnitTorqueBfIn,   XyFunctionUnitTorqueBfFt, XyFunctionUnitGravitationalAccelerationM, XyFunctionUnitGravitationalAccelerationMm, XyFunctionUnitGravitationalAccelerationIn,   XyFunctionUnitGravitationalAccelerationFt, XyFunctionUnitGravitationalAccelerationGs, XyFunctionUnitCurv1M, XyFunctionUnitCurv1Mm,   XyFunctionUnitCurv1In, XyFunctionUnitCurv1Ft, XyFunctionUnitElementForceMnMm, XyFunctionUnitElementForceNMm,   XyFunctionUnitElementForceNM, XyFunctionUnitElementForceBfIn, XyFunctionUnitElementForceBfFt, XyFunctionUnitElementMomentMnMm,   XyFunctionUnitElementMomentNMm, XyFunctionUnitElementMomentNM, XyFunctionUnitElementMomentBfIn, XyFunctionUnitElementMomentBfFt,   XyFunctionUnitVoltageV, XyFunctionUnitVoltageMv, XyFunctionUnitElectricCurrentA, XyFunctionUnitElectricCurrentMa,   XyFunctionUnitLoadfactorNone, XyFunctionUnitMotorSignalNone, XyFunctionUnitUnitlessScalarNone, XyFunctionUnitUnitlessRealNone,   XyFunctionUnitUnitlessIntegerNone, XyFunctionUnitMassSlug, XyFunctionUnitStressLbfFt, XyFunctionUnitForcePoundal,   XyFunctionUnitNumber }
	Defines all units used by xy function. More...

Detailed Description

Provides classes and interfaces relating to Advanced Simulation and Design Simulation.

Enumeration Type Documentation

enum NXOpen::CAE::CaeSetGroupFilterType

Used to specify the filter to extract type of objects from a group e.g geometric face, element, node ..etc.

Enumerator:

CaeSetGroupFilterTypeNode	filter type is node
CaeSetGroupFilterTypeElement	fitler type is any element
CaeSetGroupFilterTypeGeomFace	filter type is geometric face
CaeSetGroupFilterTypeGeomBody	filter type is geometric body
CaeSetGroupFilterTypeGeomCurve	filter type is geometric curve
CaeSetGroupFilterTypeGeomPoint	filter type is geometric point
CaeSetGroupFilterTypePointElement	filter type is 0D element
CaeSetGroupFilterTypeBeamElement	filter type is 1D element
CaeSetGroupFilterTypeShellElement	filter type is 2D element
CaeSetGroupFilterTypeSolidElement	filter type is 3D element
CaeSetGroupFilterTypeGeomPlanarFace	filter type is geometric planar face
CaeSetGroupFilterTypeGeomCylFace	filter type is geometric cylindrical face
CaeSetGroupFilterTypeBeamElementTypeBar	filter type is 1D element of type Bar
CaeSetGroupFilterTypeBeamElementTypeBeam	filter type is 1D element of type Beam
CaeSetGroupFilterTypeBeamElementTypeRod	filter type is 1D element of type Rod
CaeSetGroupFilterTypeBeamElementTypeBearing	filter type is 1D element of type Bearing
CaeSetGroupFilterTypeNodeAndElement	filter type is any node and element
CaeSetGroupFilterTypeCaeGeometry	filter type is any cae geometry
CaeSetGroupFilterTypeCaeMesh	filter type is any cae mesh

enum NXOpen::CAE::CaeSetObjectSubType

Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc.

Enumerator:

CaeSetObjectSubTypeNone	sub type is the same as the type of the object
CaeSetObjectSubTypeElementFace	sub type is element face
CaeSetObjectSubTypeElementEdge	sub type is element edge
CaeSetObjectSubTypePart	sub type is part, used for Gravity Loads

enum NXOpen::CAE::CorrelShapemetrictype

shape Metric Code

Enumerator:

CorrelShapemetrictypeMac	Shape metric type is Modal Assurance Criteria.
CorrelShapemetrictypeComac	Shape metric type is Coordinate Modal Assurance Criteria.
CorrelShapemetrictypeMsf	Shape metric type is Modal Scale Factors.
CorrelShapemetrictypeXortho	Shape metric type is Cross Orthogonality.
CorrelShapemetrictypeNco	Shape metric type is Normalized Cross Orthogonality.
CorrelShapemetrictypeSco	Shape metric type is SEREP-Cross-Orthogonality.

enum NXOpen::CAE::DisplaySectionType

specifies the type of display for 1d element sections

Enumerator:

DisplaySectionTypeNone	none
DisplaySectionTypeCurves	curves
DisplaySectionTypeSolid	solid

enum NXOpen::CAE::ElementNormalsType

specifies the type of display for 2d element normals

Enumerator:

ElementNormalsTypeNone	none
ElementNormalsTypeTails	tails
ElementNormalsTypeVectors	vectors

enum NXOpen::CAE::MarkerType0d

specifies the marker to use for the 0d element display

Enumerator:

MarkerType0dNone	none
MarkerType0dPlus	plus
MarkerType0dDot	dot
MarkerType0dAsterisk	asterisk
MarkerType0dCircle	circle
MarkerType0dPoundsign	poundsign
MarkerType0dCross	cross
MarkerType0dSquare	square
MarkerType0dTriangle	triangle
MarkerType0dDiamond	diamond
MarkerType0dCenterLine	center line
MarkerType0dFilledCircle	filled circle
MarkerType0dFilledSquare	filled square
MarkerType0dFilledSquareWithOneRing	filled square with one ring
MarkerType0dFilledSquareWithTwoRings	filled square with two rings
MarkerType0dTriangleInTriangle	triangle in triangle
MarkerType0dFilledDiamond	filled diamond
MarkerType0dCircleInCircle	circle in circle
MarkerType0dCircleInSquare	circle in square
MarkerType0dLargeFilledSquare	large filled square
MarkerType0dSquareInSquare	square in square
MarkerType0dThickCircle	thick circle
MarkerType0dLargeBox	large box

enum NXOpen::CAE::RadiusType

Specify the radius point type.

Enumerator:

RadiusTypeAllTypes	All fillet types.
RadiusTypeInside	inside radius
RadiusTypeOutside	outside radius

enum NXOpen::CAE::XyFunctionDataType

Defines the data type of a function in AFU file.

Enumerator:

XyFunctionDataTypeGeneral	Function is General Function.
XyFunctionDataTypeTime	Function is Time History.
XyFunctionDataTypeFrequencyResponseFunction	Function is Frequency Response Function.
XyFunctionDataTypeTransmissibility	Function is Transmissibility.
XyFunctionDataTypeStressStrain	Function is Stress/Strain Function.
XyFunctionDataTypeLife	Function is Fatigue Life.
XyFunctionDataTypeCampbellDiagram	Function is Campbell Diagram.
XyFunctionDataTypeTimingChart	Function is Timing Chart.
XyFunctionDataTypeStiffnessAndDamping	Function is Stiffness and Damping.

enum NXOpen::CAE::XyFunctionGeneralType

Defines general purpose type of a function.

Enumerator:

XyFunctionGeneralTypeGeneral	Function is General Function.
XyFunctionGeneralTypeTime	Function is Time History.
XyFunctionGeneralTypeSpectrum	Function is Spectrum.
XyFunctionGeneralTypePowerSpectralDensity	Function is Power Spectral Density.
XyFunctionGeneralTypeShockResponseSpectrum	Function is Shock Response Spectrum.
XyFunctionGeneralTypeFrequencyResponseFunction	Function is Frequency Response Function.
XyFunctionGeneralTypeTemperature	Function is Temperature.
XyFunctionGeneralTypeStressStrain	Function is Stress/Strain Function.
XyFunctionGeneralTypeLife	Function is Fatigue Life.
XyFunctionGeneralTypeCrossSpectrum	Function is Cross Spectrum.
XyFunctionGeneralTypeTransmissibility	Function is Transmissibility.
XyFunctionGeneralTypeCampbellDiagram	Function is Campbell Diagram.
XyFunctionGeneralTypeTimingChart	Function is Timing Chart.
XyFunctionGeneralTypeStiffnessAndDamping	Function is Stiffness and Damping.

enum NXOpen::CAE::XyFunctionLoadType

Defines load purpose type of a function.

Enumerator:

XyFunctionLoadTypeGeneral	Function is General Function.
XyFunctionLoadTypeTime	Function is Time History.
XyFunctionLoadTypeSpectrum	Function is Spectrum.
XyFunctionLoadTypePowerSpectralDensity	Function is Power Spectral Density.
XyFunctionLoadTypeShockResponseSpectrum	Function is Shock Response Spectrum.

enum NXOpen::CAE::XyFunctionMacroType

Defines the application type of a function.

Enumerator:

XyFunctionMacroTypeGeneral	Function could be used in any application.
XyFunctionMacroTypeMotion	Function is only used in a motion application.
XyFunctionMacroTypeResponse	Function is only used to define a response.
XyFunctionMacroTypeLoad	Function is only used to define a load.
XyFunctionMacroTypeMaterial	Function is only used to define a material.

enum NXOpen::CAE::XyFunctionMaterialType

Defines material purpose type of a function.

Enumerator:

XyFunctionMaterialTypeGeneral	Function is General Function.
XyFunctionMaterialTypeTime	Function is Time History.
XyFunctionMaterialTypeTemperature	Function is Temperature.
XyFunctionMaterialTypeStressStrain	Function is Stress/Strain Function.
XyFunctionMaterialTypeLife	Function is Fatigue Life.

enum NXOpen::CAE::XyFunctionMeasure

Defines measurement unit types.

Enumerator:

XyFunctionMeasureGeneral	General unit.
XyFunctionMeasureDisplacement	Displacement unit.
XyFunctionMeasureForce	Force unit.
XyFunctionMeasureTemperature	Temperature unit.
XyFunctionMeasureTime	Time unit.
XyFunctionMeasureFrequency	Frequency unit.
XyFunctionMeasureMass	Mass unit.
XyFunctionMeasureVelocity	Velocity unit.
XyFunctionMeasureAcceleration	Acceleration unit.
XyFunctionMeasureAngularDisplacement	Angular displacement unit.
XyFunctionMeasureAngularVelocity	Angular velocity unit.
XyFunctionMeasureAngularAcceleration	Angular acceleration unit.
XyFunctionMeasureMoment	Moment unit.
XyFunctionMeasurePressure	Pressure unit.
XyFunctionMeasureStress	Stress unit.
XyFunctionMeasureStrain	Strain unit.
XyFunctionMeasureRpm	RPM unit.
XyFunctionMeasureOrder	Order unit.
XyFunctionMeasureCycles	Cycles unit.
XyFunctionMeasureLoadfactor	Load Factor unit.
XyFunctionMeasureTorque	Torque unit.
XyFunctionMeasureGravity	Gravity unit.
XyFunctionMeasureCurvature	Curvature unit.
XyFunctionMeasureElementForce	Element force unit.
XyFunctionMeasureElementMoment	Element moment unit.
XyFunctionMeasureMotorSignal	Motor signal unit.
XyFunctionMeasureUnitlessScalar	Unitless scalar unit.
XyFunctionMeasureUnitlessReal	Unitless real unit.
XyFunctionMeasureUnitlessInteger	Unitless integer unit.
XyFunctionMeasureVoltage	Voltage unit.
XyFunctionMeasureElectricCurrent	Electric current unit.
XyFunctionMeasureNumber	Measure number.

enum NXOpen::CAE::XyFunctionMotionType

Defines motion purpose type of a function.

Enumerator:

XyFunctionMotionTypeTime	Function is Time History.
XyFunctionMotionTypeTimingChart	Function is Timing Chart.
XyFunctionMotionTypeStiffnessAndDamping	Function is Stiffness and Damping.

enum NXOpen::CAE::XyFunctionResponseType

Defines response purpose type of a function.

Enumerator:

XyFunctionResponseTypeGeneral	Function is General Function.
XyFunctionResponseTypeTime	Function is Time History.
XyFunctionResponseTypeSpectrum	Function is Spectrum.
XyFunctionResponseTypePowerSpectralDensity	Function is Power Spectral Density.
XyFunctionResponseTypeShockResponseSpectrum	Function is Shock Response Spectrum.
XyFunctionResponseTypeFrequencyResponseFunction	Function is Frequency Response Function.
XyFunctionResponseTypeCrossSpectrum	Function is Cross Spectrum.
XyFunctionResponseTypeTransmissibility	Function is Transmissibility.

enum NXOpen::CAE::XyFunctionUnit

Defines all units used by xy function.

Enumerator:

XyFunctionUnitUnknown	Unknown unit.
XyFunctionUnitDisplacementM	Displacement unit: m.
XyFunctionUnitDisplacementMm	Displacement unit: mm.
XyFunctionUnitDisplacementIn	Displacement unit: in.
XyFunctionUnitDisplacementFt	Displacement unit: ft.
XyFunctionUnitForceN	Force unit: N.
XyFunctionUnitForceMn	Force unit: mN.
XyFunctionUnitForceBf	Force unit: lbf.
XyFunctionUnitTemperatureC	Temperature unit: C.
XyFunctionUnitTemperatureF	Temperature unit: F.
XyFunctionUnitTemperatureK	Temperature unit: K.
XyFunctionUnitTimeSec	Time unit: seconds.
XyFunctionUnitTimeMin	Time unit: minutes.
XyFunctionUnitTimeHour	Time unit: hours.
XyFunctionUnitFrequencyHz	Frequency unit: Hz.
XyFunctionUnitMassKg	Mass unit: Kg.
XyFunctionUnitMassG	Mass unit: g.
XyFunctionUnitMassBm	Mass unit: lbm.
XyFunctionUnitMassTon	Mass unit: ton.
XyFunctionUnitMassLbfIn	Mass unit: lbf-sec^2/in.
XyFunctionUnitVelocityM	Velocity unit: m/sec.
XyFunctionUnitVelocityMm	Velocity unit: mm/sec.
XyFunctionUnitVelocityIn	Velocity unit: in/sec.
XyFunctionUnitVelocityFt	Velocity unit: ft/sec.
XyFunctionUnitAccelerationM	Acceleration unit: m/sec^2.
XyFunctionUnitAccelerationMm	Acceleration unit: mm/sec^2.
XyFunctionUnitAccelerationIn	Acceleration unit: in/sec ^2.
XyFunctionUnitAccelerationFt	Acceleration unit: ft/sec^2.
XyFunctionUnitAccelerationGs	Acceleration unit: gs.
XyFunctionUnitAngularDisplacementRadian	Angular displacement unit: radian.
XyFunctionUnitAngularDisplacementDegree	Angular displacement unit: degree.
XyFunctionUnitAngularVelocityRadian	Angular velocity unit: radian/sec.
XyFunctionUnitAngularVelocityDegree	Angular velocity unit: degree/sec.
XyFunctionUnitAngularAccelerationRadian	Angular acceleration unit: radian/sec ^2.
XyFunctionUnitAngularAccelerationDegree	Angular acceleration unit: degree/sec ^2.
XyFunctionUnitMomentMnMm	Moment unit: mN-mm.
XyFunctionUnitMomentNMm	Moment unit: N-mm.
XyFunctionUnitMomentNM	Moment unit: N-m.
XyFunctionUnitMomentBfIn	Moment unit: lbf-in.
XyFunctionUnitMomentBfFt	Moment unit: lbf-ft.
XyFunctionUnitPressureKpa	Pressure unit: KPa.
XyFunctionUnitPressureMpa	Pressure unit: MPa.
XyFunctionUnitPressurePa	Pressure unit: Pa.
XyFunctionUnitPressurePsi	Pressure unit: Psi.
XyFunctionUnitPressureLbfFt	Pressure unit: lbf/ft^2.
XyFunctionUnitPressureBar	Pressure unit: bar.
XyFunctionUnitPressureAt	Pressure unit: atm.
XyFunctionUnitStressKpa	Stress unit: KPa.
XyFunctionUnitStressMpa	Stress unit: MPa.
XyFunctionUnitStressPa	Stress unit: Pa.
XyFunctionUnitStressPsi	Stress unit: Psi.
XyFunctionUnitStrainMm	Strain unit: mm/mm.
XyFunctionUnitStrainIn	Strain unit: in/in.
XyFunctionUnitRpmRpm	RPM unit: rpm.
XyFunctionUnitOrderOrder	Order unit: order.
XyFunctionUnitCyclesDuty	Cycles unit: duty cycles.
XyFunctionUnitTorqueMnMm	Torque unit: mN-mm.
XyFunctionUnitTorqueNMm	Torque unit: N-mm.
XyFunctionUnitTorqueNM	Torque unit: N-m.
XyFunctionUnitTorqueBfIn	Torque unit: lbf-in.
XyFunctionUnitTorqueBfFt	Torque unit: lbf-ft.
XyFunctionUnitGravitationalAccelerationM	Gravitational Acceleration unit: m/sec^2.
XyFunctionUnitGravitationalAccelerationMm	Gravitational Acceleration unit: mm/sec^2.
XyFunctionUnitGravitationalAccelerationIn	Gravitational Acceleration unit: in/sec ^2.
XyFunctionUnitGravitationalAccelerationFt	Gravitational Acceleration unit: ft/sec^2.
XyFunctionUnitGravitationalAccelerationGs	Gravitational Acceleration unit: gs.
XyFunctionUnitCurv1M	Curvature unit: 1/m.
XyFunctionUnitCurv1Mm	Curvature unit: 1/mm.
XyFunctionUnitCurv1In	Curvature unit: 1/in.
XyFunctionUnitCurv1Ft	Curvature unit: 1/ft.
XyFunctionUnitElementForceMnMm	Element Force unit: mN/mm.
XyFunctionUnitElementForceNMm	Element Force unit: N/mm.
XyFunctionUnitElementForceNM	Element Force unit: N/m.
XyFunctionUnitElementForceBfIn	Element Force unit: lbf/in.
XyFunctionUnitElementForceBfFt	Element Force unit: lbf/ft.
XyFunctionUnitElementMomentMnMm	Element Moment unit: mN-mm/mm.
XyFunctionUnitElementMomentNMm	Element Moment unit: N-mm/mm.
XyFunctionUnitElementMomentNM	Element Moment unit: N-m/m.
XyFunctionUnitElementMomentBfIn	Element Moment unit: lbf-in/in.
XyFunctionUnitElementMomentBfFt	Element Moment unit: lbf-ft/ft.
XyFunctionUnitVoltageV	Voltage unit: V.
XyFunctionUnitVoltageMv	Voltage unit: mV.
XyFunctionUnitElectricCurrentA	Electric Current unit: A.
XyFunctionUnitElectricCurrentMa	Electric Current unit: mA.
XyFunctionUnitLoadfactorNone	Load Factor unit: none.
XyFunctionUnitMotorSignalNone	Motor Signal unit: none.
XyFunctionUnitUnitlessScalarNone	Unitless Scalar unit: none.
XyFunctionUnitUnitlessRealNone	Unitless Real unit: none.
XyFunctionUnitUnitlessIntegerNone	Unitless Integer unit: none.
XyFunctionUnitMassSlug	Mass unit: lbf-sec^2/ft.
XyFunctionUnitStressLbfFt	Stress unit: lbf/ft^2.
XyFunctionUnitForcePoundal	Force unit: Poundal.
XyFunctionUnitNumber	Unit number.