NXOpen::CAE::ResponseSimulation Namespace Reference

Provides classes and interfaces for Response Simulation. More...

Classes
class	BaseBuilder
	Represents the abstract builder class for all objects defined in response analysis meta solution This is an abstract class, and cannot be created. More...
class	CombinationEvaluationOptions
	Represents the setting for combination evaluation. More...
class	CsdEvaluationSetting
	Represents the class of evaluation setting for CSD To create or edit an instance of this class, use CAE::ResponseSimulation::CsdEvaluationSettingBuilder Created in NX6.0.0. More...
class	CsdEvaluationSettingBuilder
	Represents the CSD build To create a new instance of this class, use CAE::ResponseSimulation::EvaluationSettingManager::CreateCsdEvaluationSettingBuilder Created in NX6.0.0. More...
class	CSDExcitation
	Represents an CSD excitation. More...
class	CSDExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::CSDExcitation . More...
class	DataLocation
	Represents the data location to perform evaluation Created in NX5.0.0. More...
class	DDAMComponentData
	Represents an excitation on one specified direction. More...
class	DDAMExcitation
	Represents an DDAM excitation. More...
class	DDAMExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::DDAMExcitation . More...
class	DistributedLoadExcitation
	Represents an excitation of distributed-load type To create or edit an instance of this class, use CAE::ResponseSimulation::DistributedLoadExcitationBuilder Created in NX5.0.0. More...
class	DistributedLoadExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::DistributedLoadExcitation . More...
class	DynamicEvaluationOutputSettings
	Represents the output setting for dynamic response evaluation Created in NX5.0.0. More...
class	DynamicResultEvaluationSetting
	Represents the abstract class of evaluation setting for all dynamic results evaluations. More...
class	DynamicResultEvaluationSettingBuilder
	Represents the abstract builder class of evaluation setting for all dynamic results evaluations. More...
class	ElementalFunctionEvaluationSetting
	Represents the parameters setting for elemental function evaluation. More...
class	ElementalFunctionEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::ElementalFunctionEvaluationSetting class. More...
class	EvaluationParameters
	Represents the evaluation parameters for a response simulation meta solution Not support KF. More...
class	EvaluationSetting
	Represents the abstract class of all evaluation setting classes. More...
class	EvaluationSettingBuilder
	Represents the abstract builder class of all evaluation setting classes. More...
class	EvaluationSettingManager
	Represents the manager of all evaluation setting objects. More...
class	Excitation
	Represents the abstract class of dynamic excitations This is an abstract class, and cannot be created. More...
class	ExcitationBuilder
	Represents the abstract excitation builder class. More...
class	ExcitationCollection
	Represents a collection of excitation objects To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0. More...
class	ExcitationLocationDefinition
	Represents the manager to CAE::ResponseSimulation::DistributedLoadExcitation . More...
class	FrequencyDefinition
	Represents the frequency setting to perform FRF evaluation Created in NX5.0.0. More...
class	FrfEvaluationSetting
	Represents the parameters setting for FRF results evaluation To create or edit an instance of this class, use CAE::ResponseSimulation::FrfEvaluationSettingBuilder Created in NX5.0.0. More...
class	FrfEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::FrfEvaluationSetting class. More...
class	FunctionComponentData
	Represents a function component setting of CAE::ResponseSimulation::NodalFunctionExcitation on one direction Created in NX5.0.0. More...
class	FunctionEvaluationOutputSettings
	Represents the output setting for function response evaluation Created in NX5.0.0. More...
class	FunctionEvaluationSetting
	Represents the abstract class of evaluation setting for function response evaluation This is an abstract class, and cannot be created. More...
class	FunctionEvaluationSettingBuilder
	Represents the abstract builder class of evaluation setting for function response evaluation This is an abstract class, and cannot be created. More...
class	InitialConditions
	Represents the initial condition setting of transient event Created in NX5.0.0. More...
class	LcrResultsEvaluationSetting
	Represents the parameters setting of LCR results evaluation. More...
class	LcrResultsEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::LcrResultsEvaluationSetting class. More...
class	Manager
	Represents the Response Simulation manager to contain all Response Simulation objects To obtain an instance of this class, refer to CAE::SimSimulation Created in NX5.0.0. More...
class	ModalProperties
	Represents the modal presentation of a response analysis meta solution Created in NX5.0.0. More...
class	ModalResultsEvaluationSetting
	Represents the abstract class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created. More...
class	ModalResultsEvaluationSettingBuilder
	Represents the abstract builder class of evaluation setting for FRF and transmissibility This is an abstract class, and cannot be created. More...
class	ModeInitialData
	Represents the initial setting for a normal mode Created in NX5.0.0. More...
class	NodalFunctionEvaluationSetting
	Represents the parameters setting of nodal function response evaluation. More...
class	NodalFunctionEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::NodalFunctionEvaluationSetting class. More...
class	NodalFunctionExcitation
	Represents the abstract class of nodal function excitation This is an abstract class, and cannot be created. More...
class	NodalFunctionExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::NodalFunctionExcitation . More...
class	NormalMode
	Represents the properties of one normal mode Created in NX5.0.0. More...
class	ObjectLabel
	Represents the setting to label an object. More...
class	PeakValueEvaluationSetting
	Represents the parameters setting of peak value evaluation. More...
class	PeakValueEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::PeakValueEvaluationSetting class. More...
class	PhysicalDampingSettings
	Represents the physical damping settings for a response simulation meta solution Created in NX6.0.0. More...
class	PrlResultsEvaluationSetting
	Represents the abstract class of evaluation setting for peak value, RMS results and LCR results. More...
class	PrlResultsEvaluationSettingBuilder
	Represents the abstract builder class of evaluation setting for peak value, RMS results and LCR results. More...
class	ResponseResultsEvaluationSetting
	Represents the parameters setting for response results evaluation. More...
class	ResponseResultsEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::ResponseResultsEvaluationSetting class. More...
class	RmsResultsEvaluationSetting
	Represents the parameters setting for RMS results evaluation in response analysis. More...
class	RmsResultsEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::RmsResultsEvaluationSetting class. More...
class	RotationalDDAMExcitation
	Represents an DDAM excitation. More...
class	RotationalDDAMExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::DDAMExcitation . More...
class	RotationalNodalFunctionExcitation
	Represents a rotational nodal function excitation To create or edit an instance of this class, use CAE::ResponseSimulation::RotationalNodalFunctionExcitationBuilder Created in NX5.0.0. More...
class	RotationalNodalFunctionExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::RotationalNodalFunctionExcitation . More...
class	RSDisplayObject
	Represents a BC display attributes. More...
class	RSEvent
	Represents a response analysis event To create or edit an instance of this class, use CAE::ResponseSimulation::RSEventBuilder Created in NX5.0.0. More...
class	RSEventAttributes
	Represents all possible attributes setting for response analysis event Created in NX5.0.0. More...
class	RSEventBuilder
	Represents the manager of CAE.ResponseSimulation.RSEvent. More...
class	RSEventCollection
	Represents a collection of response analysis event To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0. More...
class	RSEventOutputSetting
	Reprensents the output setting for an event Created in NX5.0.0. More...
class	RSEventSolverParameters
	Represents a response analysis event Created in NX5.0.0. More...
class	Sensor
	Represents a CAE::ResponseSimulation::Sensor To create or edit an instance of this class, use CAE::ResponseSimulation::SensorBuilder Created in NX5.0.0. More...
class	SensorBuilder
	Represents a CAE::ResponseSimulation::SensorBuilder To create a new instance of this class, use CAE::ResponseSimulation::SensorCollection::CreateSensorBuilder Created in NX5.0.0. More...
class	SensorCollection
	Represents a collection of response analysis sensor To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0. More...
class	SensorEvaluationSetting
	Represents the parameters setting for sensor evaluation. More...
class	SensorEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::SensorEvaluationSetting class. More...
class	Solution
	Represents a meta solution providing response analysis functionalities in the .sim file To create or edit an instance of this class, use CAE::ResponseSimulation::SolutionBuilder Created in NX5.0.0. More...
class	SolutionAttributes
	Represents attributes setting of response analysis meta solution Created in NX6.0.0. More...
class	SolutionBuilder
	This is a manager to the CAE::ResponseSimulation::Solution class. More...
class	SolutionCollection
	Represents a collection of response analysis meta solution To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX5.0.0. More...
class	StaticLoadExcitation
	Represents an excitation of static load type To create or edit an instance of this class, use CAE::ResponseSimulation::StaticLoadExcitationBuilder Created in NX6.0.0. More...
class	StaticLoadExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::StaticLoadExcitation . More...
class	StrainGage
	Represents a CAE::ResponseSimulation::StrainGage To create or edit an instance of this class, use CAE::ResponseSimulation::StrainGageBuilder Created in NX6.0.0. More...
class	StrainGageBuilder
	Represents a StrainGageBuilder <br> To create a new instance of this class, use @link CAE::ResponseSimulation::StrainGageCollection::CreateStrainGageBuilder CAE::ResponseSimulation::StrainGageCollection::CreateStrainGageBuilder @endlink <br> Default values. More...
class	StrainGageCollection
	Represents a collection of response analysis strain gage To obtain an instance of this class, refer to CAE::ResponseSimulation::Manager Created in NX6.0.0. More...
class	StrainGageEvaluationSetting
	Represents the parameters setting for strain gage evaluation. More...
class	StrainGageEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::StrainGageEvaluationSetting class. More...
class	StrengthResultsEvaluationSetting
	Represents parameters setting for strength results evaluation. More...
class	StrengthResultsEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::StrengthResultsEvaluationSetting class. More...
class	TranslationalDDAMExcitation
	Represents an DDAM excitation. More...
class	TranslationalDDAMExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::DDAMExcitation . More...
class	TranslationalNodalFunctionExcitation
	Represents a translational nodal function excitation To create or edit an instance of this class, use CAE::ResponseSimulation::TranslationalNodalFunctionExcitationBuilder Created in NX5.0.0. More...
class	TranslationalNodalFunctionExcitationBuilder
	Represents the manager to CAE::ResponseSimulation::TranslationalNodalFunctionExcitation . More...
class	TransmissibilityEvaluationSetting
	Represents parameters setting for transmissibility evaluation To create or edit an instance of this class, use CAE::ResponseSimulation::TransmissibilityEvaluationSettingBuilder Created in NX5.0.0. More...
class	TransmissibilityEvaluationSettingBuilder
	This is a manager to the CAE::ResponseSimulation::TransmissibilityEvaluationSetting class. More...
class	VelocityImpactDirection
	Represents a CAE::ResponseSimulation::VelocityImpactDirection. More...
class	VelocityImpactExcitation
	Represents a velocity impact excitation To create or edit an instance of this class, use CAE::ResponseSimulation::VelocityImpactExcitationBuilder Created in NX6.0.0. More...
class	VelocityImpactExcitationBuilder
	Represents a @link CAE::ResponseSimulation::VelocityImpactExcitationBuilder CAE::ResponseSimulation::VelocityImpactExcitationBuilder@endlink <br> To create a new instance of this class, use @link CAE::ResponseSimulation::ExcitationCollection::CreateVelocityImpactExcitationBuilder CAE::ResponseSimulation::ExcitationCollection::CreateVelocityImpactExcitationBuilder @endlink <br> Default values. More...
class	VelocityImpactParameters
	Represents a CAE::ResponseSimulation::VelocityImpactParameters. More...

Enumerations
enum	CoordinateSystem { CoordinateSystemNodal, CoordinateSystemGlobal, CoordinateSystemElemental, CoordinateSystemMaterial }
	Specifies the coordinate system. More...
enum	DirectionDataComponent {   DirectionDataComponentX, DirectionDataComponentY, DirectionDataComponentZ, DirectionDataComponentRx,   DirectionDataComponentRy, DirectionDataComponentRz, DirectionDataComponentXx, DirectionDataComponentYy,   DirectionDataComponentZz, DirectionDataComponentXy, DirectionDataComponentXz, DirectionDataComponentYz,   DirectionDataComponentAx, DirectionDataComponentSy, DirectionDataComponentSz, DirectionDataComponentTx,   DirectionDataComponentByy, DirectionDataComponentBz, DirectionDataComponentFxx, DirectionDataComponentFyy,   DirectionDataComponentFzz, DirectionDataComponentFxy, DirectionDataComponentMx, DirectionDataComponentMy,   DirectionDataComponentMz, DirectionDataComponentMxy, DirectionDataComponentMxz, DirectionDataComponentMyz,   DirectionDataComponentVx, DirectionDataComponentVy, DirectionDataComponentTranslationalMagnitude, DirectionDataComponentVonmises,   DirectionDataComponentMaxPrincipal, DirectionDataComponentMinPrincipal, DirectionDataComponentMaxShear, DirectionDataComponentAllNormals,   DirectionDataComponentAllTranslational, DirectionDataComponentAllForces, DirectionDataComponentAllDirections, DirectionDataComponentAllDataComponents,   DirectionDataComponentAll, DirectionDataComponentAllXyPlane, DirectionDataComponentLeg1, DirectionDataComponentLeg2,   DirectionDataComponentLeg3, DirectionDataComponentAllLegs }
	Specifies the direction data components. More...
enum	ElementalFunctionEvalBeamLocation { ElementalFunctionEvalBeamLocationC, ElementalFunctionEvalBeamLocationD, ElementalFunctionEvalBeamLocationE, ElementalFunctionEvalBeamLocationF }
	Specifies beam element evaluation locations. More...
enum	ElementLocation { ElementLocationBoth, ElementLocationCentroid, ElementLocationCorners }
	Specifies element locations. More...
enum	EvaluationResultType {   EvaluationResultTypeReceptance, EvaluationResultTypeMobility, EvaluationResultTypeInertance, EvaluationResultTypeDisplacement,   EvaluationResultTypeVelocity, EvaluationResultTypeAcceleration, EvaluationResultTypeStress, EvaluationResultTypeStrain,   EvaluationResultTypeStrainEnergy, EvaluationResultTypeShellResultant, EvaluationResultTypeElementForce, EvaluationResultTypeBeamElementForce,   EvaluationResultTypeShellStressResultant, EvaluationResultTypeReactionForce }
	Specifies the evaluation result type. More...
enum	InterpolationMethod { InterpolationMethodLogLog, InterpolationMethodLinearLinear, InterpolationMethodLinearLog, InterpolationMethodLogLinear }
	This enum defines interpolation method. More...
enum	NodalAveragingOption { NodalAveragingOptionShells, NodalAveragingOptionSolids }
	Specifies nodal averaging options. More...
enum	NodalFunctionEvalBeamLocation {   NodalFunctionEvalBeamLocationC, NodalFunctionEvalBeamLocationD, NodalFunctionEvalBeamLocationE, NodalFunctionEvalBeamLocationF,   NodalFunctionEvalBeamLocationAll }
	Specifies beam element evaluation locations for nodal function evaluation. More...
enum	NodalFunctionEvalRequest { NodalFunctionEvalRequestUserDefinedDirection, NodalFunctionEvalRequestDataComponent }
	Specifies response request for nodal function evaluation. More...
enum	NodalFunctionEvalShellLocation { NodalFunctionEvalShellLocationTop, NodalFunctionEvalShellLocationMiddle, NodalFunctionEvalShellLocationBottom, NodalFunctionEvalShellLocationAll }
	Specifies shell element evaluation locations for nodal function evaluation. More...
enum	ResponseDomainDefinitionMethod { ResponseDomainDefinitionMethodStartEndPoint, ResponseDomainDefinitionMethodKeyIn, ResponseDomainDefinitionMethodNaturalFrequency }
	Specifies response result evaluation options. More...
enum	RmsLcrEvaluationMethod { RmsLcrEvaluationMethodSmallNumberItems, RmsLcrEvaluationMethodLargeNumberItems, RmsLcrEvaluationMethodAutomaticSelection }
	Specifies the evaluation method for RMS or LCR calculation. More...
enum	SensorCoordinateType { SensorCoordinateTypeNodalCs, SensorCoordinateTypeGlobalCs }
	Specifies the coordinate type of Sensor. More...
enum	SensorResultType { SensorResultTypeDisplacement, SensorResultTypeVelocity, SensorResultTypeAcceleration, SensorResultTypeReactionForce }
	Specifies the result type of Sensor. More...
enum	SensorType { SensorTypeComponent, SensorTypeDirection, SensorTypeNormal }
	Specifies the type of Sensor. More...
enum	ShellElementEvaluationLocation { ShellElementEvaluationLocationTop, ShellElementEvaluationLocationMiddle, ShellElementEvaluationLocationBottom }
	Specifies shell element evaluation locations. More...
enum	StrainGageOrientationPlane { StrainGageOrientationPlaneFacePlane, StrainGageOrientationPlaneCsys }
	Specifies the orientation plane type of Strain Gage. More...
enum	StrainGagePlacementType { StrainGagePlacementTypeNode, StrainGagePlacementTypeElementFaceCenter }
	Specifies the placement type of Strain Gage. More...
enum	StrainGageResult { StrainGageResultStrain, StrainGageResultStress }
	Specifies the result type of Strain Gage. More...
enum	StrainGageShellElementFaceType { StrainGageShellElementFaceTypeTop, StrainGageShellElementFaceTypeBotton }
	Specifies the shell element location type of Strain Gage. More...
enum	StrainGageType { StrainGageTypeUniAxial, StrainGageTypeBiAxial, StrainGageTypeRosette45DegreeIncrement, StrainGageTypeRosette60DegreeIncrement }
	Specifies the type of Strain Gage. More...
enum	StrengthStressCriteria { StrengthStressCriteriaVonMises, StrengthStressCriteriaMaxPrinciple, StrengthStressCriteriaMinPrinciple }
	Specifies strength stress criteria. More...
enum	StrengthStressMaterialDefinitionMethod { StrengthStressMaterialDefinitionMethodUltimateSafety, StrengthStressMaterialDefinitionMethodYieldSafety }
	Specifies the definition method for material. More...
enum	StrengthStressOption { StrengthStressOptionElementMaximum, StrengthStressOptionNodeOnElement }
	The options of stress. More...

Detailed Description

Provides classes and interfaces for Response Simulation.

Enumeration Type Documentation

enum NXOpen::CAE::ResponseSimulation::CoordinateSystem

Specifies the coordinate system.

Enumerator:

CoordinateSystemNodal	nodal
CoordinateSystemGlobal	global
CoordinateSystemElemental	elemental
CoordinateSystemMaterial	material

enum NXOpen::CAE::ResponseSimulation::DirectionDataComponent

Specifies the direction data components.

Enumerator:

DirectionDataComponentX	x
DirectionDataComponentY	y
DirectionDataComponentZ	z
DirectionDataComponentRx	rx
DirectionDataComponentRy	ry
DirectionDataComponentRz	rz
DirectionDataComponentXx	xx
DirectionDataComponentYy	yy
DirectionDataComponentZz	zz
DirectionDataComponentXy	xy
DirectionDataComponentXz	xz
DirectionDataComponentYz	yz
DirectionDataComponentAx	ax
DirectionDataComponentSy	sy
DirectionDataComponentSz	sz
DirectionDataComponentTx	tx
DirectionDataComponentByy	byy
DirectionDataComponentBz	bz
DirectionDataComponentFxx	fxx
DirectionDataComponentFyy	fyy
DirectionDataComponentFzz	fzz
DirectionDataComponentFxy	fxy
DirectionDataComponentMx	mx
DirectionDataComponentMy	my
DirectionDataComponentMz	mz
DirectionDataComponentMxy	mxy
DirectionDataComponentMxz	mxz
DirectionDataComponentMyz	myz
DirectionDataComponentVx	vx
DirectionDataComponentVy	vy
DirectionDataComponentTranslationalMagnitude	translational magnitude
DirectionDataComponentVonmises	vonmises
DirectionDataComponentMaxPrincipal	max principal
DirectionDataComponentMinPrincipal	min principal
DirectionDataComponentMaxShear	max shear
DirectionDataComponentAllNormals	all normals
DirectionDataComponentAllTranslational	all translational
DirectionDataComponentAllForces	all forces
DirectionDataComponentAllDirections	all directions
DirectionDataComponentAllDataComponents	all data components
DirectionDataComponentAll	all
DirectionDataComponentAllXyPlane	all xy plane
DirectionDataComponentLeg1	leg1
DirectionDataComponentLeg2	leg2
DirectionDataComponentLeg3	leg3
DirectionDataComponentAllLegs	all legs

enum NXOpen::CAE::ResponseSimulation::ElementalFunctionEvalBeamLocation

Specifies beam element evaluation locations.

Enumerator:

ElementalFunctionEvalBeamLocationC	c
ElementalFunctionEvalBeamLocationD	d
ElementalFunctionEvalBeamLocationE	e
ElementalFunctionEvalBeamLocationF	f

enum NXOpen::CAE::ResponseSimulation::ElementLocation

Specifies element locations.

Enumerator:

ElementLocationBoth	both
ElementLocationCentroid	centroid
ElementLocationCorners	corners

enum NXOpen::CAE::ResponseSimulation::EvaluationResultType

Specifies the evaluation result type.

Enumerator:

EvaluationResultTypeReceptance	receptance
EvaluationResultTypeMobility	mobility
EvaluationResultTypeInertance	inertance
EvaluationResultTypeDisplacement	displacement
EvaluationResultTypeVelocity	velocity
EvaluationResultTypeAcceleration	acceleration
EvaluationResultTypeStress	stress
EvaluationResultTypeStrain	strain
EvaluationResultTypeStrainEnergy	strain energy
EvaluationResultTypeShellResultant	shell resultant
EvaluationResultTypeElementForce	element force
EvaluationResultTypeBeamElementForce	beam element force
EvaluationResultTypeShellStressResultant	shell stress resultant
EvaluationResultTypeReactionForce	reaction force

enum NXOpen::CAE::ResponseSimulation::InterpolationMethod

This enum defines interpolation method.

Enumerator:

InterpolationMethodLogLog	log log
InterpolationMethodLinearLinear	linear linear
InterpolationMethodLinearLog	linear log
InterpolationMethodLogLinear	log linear

enum NXOpen::CAE::ResponseSimulation::NodalAveragingOption

Specifies nodal averaging options.

Enumerator:

NodalAveragingOptionShells	shells
NodalAveragingOptionSolids	solids

enum NXOpen::CAE::ResponseSimulation::NodalFunctionEvalBeamLocation

Specifies beam element evaluation locations for nodal function evaluation.

Enumerator:

NodalFunctionEvalBeamLocationC	Stress Recovery point C on a beam cross section.
NodalFunctionEvalBeamLocationD	Stress Recovery point D on a beam cross section.
NodalFunctionEvalBeamLocationE	Stress Recovery point E on a beam cross section.
NodalFunctionEvalBeamLocationF	Stress Recovery point F on a beam cross section.
NodalFunctionEvalBeamLocationAll	All four Stress Recovery points on a beam cross section.

enum NXOpen::CAE::ResponseSimulation::NodalFunctionEvalRequest

Specifies response request for nodal function evaluation.

Enumerator:

NodalFunctionEvalRequestUserDefinedDirection	user defined direction
NodalFunctionEvalRequestDataComponent	data component

enum NXOpen::CAE::ResponseSimulation::NodalFunctionEvalShellLocation

Specifies shell element evaluation locations for nodal function evaluation.

Enumerator:

NodalFunctionEvalShellLocationTop	Top layer.
NodalFunctionEvalShellLocationMiddle	Middle layer.
NodalFunctionEvalShellLocationBottom	Bottom layer.
NodalFunctionEvalShellLocationAll	All three layers.

enum NXOpen::CAE::ResponseSimulation::ResponseDomainDefinitionMethod

Specifies response result evaluation options.

Enumerator:

ResponseDomainDefinitionMethodStartEndPoint	start end point
ResponseDomainDefinitionMethodKeyIn	key in
ResponseDomainDefinitionMethodNaturalFrequency	natural frequency

enum NXOpen::CAE::ResponseSimulation::RmsLcrEvaluationMethod

Specifies the evaluation method for RMS or LCR calculation.

Enumerator:

RmsLcrEvaluationMethodSmallNumberItems	Small number of evaluation items.
RmsLcrEvaluationMethodLargeNumberItems	Large number of evaluation items.
RmsLcrEvaluationMethodAutomaticSelection	Automatic selection.

enum NXOpen::CAE::ResponseSimulation::SensorCoordinateType

Specifies the coordinate type of Sensor.

Enumerator:

SensorCoordinateTypeNodalCs	nodal cs
SensorCoordinateTypeGlobalCs	global cs

enum NXOpen::CAE::ResponseSimulation::SensorResultType

Specifies the result type of Sensor.

Enumerator:

SensorResultTypeDisplacement	displacement
SensorResultTypeVelocity	velocity
SensorResultTypeAcceleration	acceleration
SensorResultTypeReactionForce	reaction force

enum NXOpen::CAE::ResponseSimulation::SensorType

Specifies the type of Sensor.

Enumerator:

SensorTypeComponent	component
SensorTypeDirection	direction
SensorTypeNormal	normal

enum NXOpen::CAE::ResponseSimulation::ShellElementEvaluationLocation

Specifies shell element evaluation locations.

Enumerator:

ShellElementEvaluationLocationTop	top
ShellElementEvaluationLocationMiddle	middle
ShellElementEvaluationLocationBottom	bottom

enum NXOpen::CAE::ResponseSimulation::StrainGageOrientationPlane

Specifies the orientation plane type of Strain Gage.

Enumerator:

StrainGageOrientationPlaneFacePlane	face plane
StrainGageOrientationPlaneCsys	csys

enum NXOpen::CAE::ResponseSimulation::StrainGagePlacementType

Specifies the placement type of Strain Gage.

Enumerator:

StrainGagePlacementTypeNode	node
StrainGagePlacementTypeElementFaceCenter	element face center

enum NXOpen::CAE::ResponseSimulation::StrainGageResult

Specifies the result type of Strain Gage.

Enumerator:

StrainGageResultStrain	strain
StrainGageResultStress	stress

enum NXOpen::CAE::ResponseSimulation::StrainGageShellElementFaceType

Specifies the shell element location type of Strain Gage.

Enumerator:

StrainGageShellElementFaceTypeTop	top
StrainGageShellElementFaceTypeBotton	botton

enum NXOpen::CAE::ResponseSimulation::StrainGageType

Specifies the type of Strain Gage.

Enumerator:

StrainGageTypeUniAxial	uni axial
StrainGageTypeBiAxial	bi axial
StrainGageTypeRosette45DegreeIncrement	Rosette 0-45-90.
StrainGageTypeRosette60DegreeIncrement	Rosette 0-60-120.

enum NXOpen::CAE::ResponseSimulation::StrengthStressCriteria

Specifies strength stress criteria.

Enumerator:

StrengthStressCriteriaVonMises	von mises
StrengthStressCriteriaMaxPrinciple	max principle
StrengthStressCriteriaMinPrinciple	min principle

enum NXOpen::CAE::ResponseSimulation::StrengthStressMaterialDefinitionMethod

Specifies the definition method for material.

Enumerator:

StrengthStressMaterialDefinitionMethodUltimateSafety	ultimate safety
StrengthStressMaterialDefinitionMethodYieldSafety	yield safety

enum NXOpen::CAE::ResponseSimulation::StrengthStressOption

The options of stress.

Enumerator:

StrengthStressOptionElementMaximum	element maximum
StrengthStressOptionNodeOnElement	node on element