NX Open C++ Reference Guide
Public Types | Public Member Functions | List of all members
NXOpen::CAE::BeamEADBuilder Class Reference

This class provides Beam/Bar Associated Data Support  <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateBeamEadBuilder  CAE::NodeElementManager::CreateBeamEadBuilder @endlink  <br>

Default values. More...

Inheritance diagram for NXOpen::CAE::BeamEADBuilder:
NXOpen::Builder NXOpen::TaggedObject NXOpen::GeometricUtilities::IComponentBuilder

Public Types

enum  EndReleaseSetting { EndReleaseSettingOff, EndReleaseSettingOn }
 indicates which end release setting to use More...
 
enum  OrientationMethod { OrientationMethodVector, OrientationMethodNode }
 indicates which orientation method to use More...
 
enum  State { StateIgnore, StateApply, StateClear }
 indicates to ignore, apply or clear the state property upon commit More...
 
enum  VectorChoiceType { VectorChoiceTypeHorizontal, VectorChoiceTypeVertical }
 indicates which vector choice to use More...
 

Public Member Functions

NXOpen::CAE::SelectElementsBuilder * Elements ()
 Returns the select element operator selects elements
Created in NX6.0.0.
 
NXOpen::Expression * EndOffsetA1 ()
 Returns the end A offset component 1 expression of the element
Created in NX7.5.0.
 
NXOpen::Expression * EndOffsetA2 ()
 Returns the end A offset component 2 expression of the element
Created in NX7.5.0.
 
NXOpen::Expression * EndOffsetA3 ()
 Returns the end A offset component 3 expression of the element
Created in NX7.5.0.
 
NXOpen::CAE::BeamEADBuilder::State EndOffsetAState ()
 Returns the state drives the commit action
Created in NX7.5.0.
 
NXOpen::Expression * EndOffsetB1 ()
 Returns the end B offset component 1 expression of the element
Created in NX7.5.0.
 
NXOpen::Expression * EndOffsetB2 ()
 Returns the end B offset component 2 expression of the element
Created in NX7.5.0.
 
NXOpen::Expression * EndOffsetB3 ()
 Returns the end B offset component 3 expression of the element
Created in NX7.5.0.
 
NXOpen::CAE::BeamEADBuilder::State EndOffsetBState ()
 Returns the state drives the commit action
Created in NX7.5.0.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA1 ()
 Returns the get end release setting turns on or off the DOF 1 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA2 ()
 Returns the get end release setting turns on or off the DOF 2 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA3 ()
 Returns the get end release setting turns on or off the DOF 3 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA4 ()
 Returns the get end release setting turns on or off the DOF 4 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA5 ()
 Returns the get end release setting turns on or off the DOF 5 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseA6 ()
 Returns the get end release setting turns on or off the DOF 6 for end A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::State EndReleaseAState ()
 Returns the method to get the state of end release A
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB1 ()
 Returns the get end release setting turns on or off the DOF 1 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB2 ()
 Returns the get end release setting turns on or off the DOF 2 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB3 ()
 Returns the get end release setting turns on or off the DOF 3 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB4 ()
 Returns the get end release setting turns on or off the DOF 4 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB5 ()
 Returns the get end release setting turns on or off the DOF 5 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::EndReleaseSetting EndReleaseB6 ()
 Returns the get end release setting turns on or off the DOF 6 for end B
Created in NX6.0.1.
 
NXOpen::CAE::BeamEADBuilder::State EndReleaseBState ()
 Returns the method to get the state of end release B
Created in NX6.0.1.
 
NXOpen::CAE::SelectFENodeList * Node ()
 Returns the get node operator selects an orientation node
Created in NX7.5.0.
 
NXOpen::CAE::BeamEADBuilder::State OrientationState ()
 Returns the state drives the commit action
Created in NX6.0.0.
 
NXOpen::CAE::BeamEADBuilder::OrientationMethod OriMethod ()
 Returns the method to get the element orientation method
Created in NX7.5.0.
 
NXOpen::Direction * SelectSectionOri ()
 Returns the get selection ori operator gets section orientaion value
Created in NX6.0.0.
 
void SetEndOffsetAState (NXOpen::CAE::BeamEADBuilder::State endOffsetAState)
 Sets the state drives the commit action
Created in NX7.5.0.
 
void SetEndOffsetBState (NXOpen::CAE::BeamEADBuilder::State endOffsetBState)
 Sets the state drives the commit action
Created in NX7.5.0.
 
void SetEndReleaseA1 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 1 for end A
Created in NX6.0.1.
 
void SetEndReleaseA2 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 2 for end A
Created in NX6.0.1.
 
void SetEndReleaseA3 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 3 for end A
Created in NX6.0.1.
 
void SetEndReleaseA4 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 4 for end A
Created in NX6.0.1.
 
void SetEndReleaseA5 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 5 for end A
Created in NX6.0.1.
 
void SetEndReleaseA6 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 6 for end A
Created in NX6.0.1.
 
void SetEndReleaseAState (NXOpen::CAE::BeamEADBuilder::State endReleaseAState)
 Sets the method to get the state of end release A
Created in NX6.0.1.
 
void SetEndReleaseB1 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 1 for end B
Created in NX6.0.1.
 
void SetEndReleaseB2 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 2 for end B
Created in NX6.0.1.
 
void SetEndReleaseB3 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 3 for end B
Created in NX6.0.1.
 
void SetEndReleaseB4 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 4 for end B
Created in NX6.0.1.
 
void SetEndReleaseB5 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 5 for end B
Created in NX6.0.1.
 
void SetEndReleaseB6 (NXOpen::CAE::BeamEADBuilder::EndReleaseSetting endReleaseSetting)
 Sets the get end release setting turns on or off the DOF 6 for end B
Created in NX6.0.1.
 
void SetEndReleaseBState (NXOpen::CAE::BeamEADBuilder::State endReleaseBState)
 Sets the method to get the state of end release B
Created in NX6.0.1.
 
void SetOrientationState (NXOpen::CAE::BeamEADBuilder::State orientationState)
 Sets the state drives the commit action
Created in NX6.0.0.
 
void SetOriMethod (NXOpen::CAE::BeamEADBuilder::OrientationMethod oriMethod)
 Sets the method to get the element orientation method
Created in NX7.5.0.
 
void SetSelectSectionOri (NXOpen::Direction *selectSectionOri)
 Sets the get selection ori operator gets section orientaion value
Created in NX6.0.0.
 
void SetVectorChoice (NXOpen::CAE::BeamEADBuilder::VectorChoiceType vectorChoice)
 Sets the method to get the orientation vector choice
Created in NX7.5.0.
 
NXOpen::CAE::BeamEADBuilder::VectorChoiceType VectorChoice ()
 Returns the method to get the orientation vector choice
Created in NX7.5.0.
 
- Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject * Commit ()
 Commits any edits that have been applied to the builder.
 
void Destroy ()
 Deletes the builder, and cleans up any objects created by the builder.
 
std::vector< NXOpen::NXObject * > GetCommittedObjects ()
 For builders that create more than one object, this method returns the objects that are created by commit.
 
NXOpen::NXObject * GetObject ()
 Returns the object currently being edited by this builder.
 
void ShowResults ()
 Updates the model to reflect the result of an edit to the model for all builders that support showing results.
 
virtual bool Validate ()
 Validate whether the inputs to the component are sufficient for commit to be called.
 
- Public Member Functions inherited from NXOpen::TaggedObject
tag_t GetTag () const
 
<b>Deprecated</b>:<br>

   Use Tag instead.

 
tag_t Tag () const
 Returns the tag of this object.
 

Detailed Description

This class provides Beam/Bar Associated Data Support  <br> To create a new instance of this class, use @link CAE::NodeElementManager::CreateBeamEadBuilder  CAE::NodeElementManager::CreateBeamEadBuilder @endlink  <br>

Default values.

Property Value

EndReleaseAState

Ignore

EndReleaseBState

Ignore

OrientationState

Ignore


Created in NX6.0.0.

Member Enumeration Documentation

enum NXOpen::CAE::BeamEADBuilder::EndReleaseSetting

indicates which end release setting to use

Enumerator:
EndReleaseSettingOff 

end release set to off

EndReleaseSettingOn 

end release set to on

enum NXOpen::CAE::BeamEADBuilder::OrientationMethod

indicates which orientation method to use

Enumerator:
OrientationMethodVector 

use a vector to orient the element

OrientationMethodNode 

use a node to orient the element

enum NXOpen::CAE::BeamEADBuilder::State

indicates to ignore, apply or clear the state property upon commit

Enumerator:
StateIgnore 

ignore the property

StateApply 

apply the property

StateClear 

clear the property

enum NXOpen::CAE::BeamEADBuilder::VectorChoiceType

indicates which vector choice to use

Enumerator:
VectorChoiceTypeHorizontal 

the vector is defined to be horizontal

VectorChoiceTypeVertical 

the vector is defined to be vertical

Member Function Documentation

NXOpen::CAE::SelectElementsBuilder* NXOpen::CAE::BeamEADBuilder::Elements ( )

Returns the select element operator selects elements
Created in NX6.0.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetA1 ( )

Returns the end A offset component 1 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetA2 ( )

Returns the end A offset component 2 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetA3 ( )

Returns the end A offset component 3 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::State NXOpen::CAE::BeamEADBuilder::EndOffsetAState ( )

Returns the state drives the commit action
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetB1 ( )

Returns the end B offset component 1 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetB2 ( )

Returns the end B offset component 2 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Expression* NXOpen::CAE::BeamEADBuilder::EndOffsetB3 ( )

Returns the end B offset component 3 expression of the element
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::State NXOpen::CAE::BeamEADBuilder::EndOffsetBState ( )

Returns the state drives the commit action
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA1 ( )

Returns the get end release setting turns on or off the DOF 1 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA2 ( )

Returns the get end release setting turns on or off the DOF 2 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA3 ( )

Returns the get end release setting turns on or off the DOF 3 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA4 ( )

Returns the get end release setting turns on or off the DOF 4 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA5 ( )

Returns the get end release setting turns on or off the DOF 5 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseA6 ( )

Returns the get end release setting turns on or off the DOF 6 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::State NXOpen::CAE::BeamEADBuilder::EndReleaseAState ( )

Returns the method to get the state of end release A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB1 ( )

Returns the get end release setting turns on or off the DOF 1 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB2 ( )

Returns the get end release setting turns on or off the DOF 2 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB3 ( )

Returns the get end release setting turns on or off the DOF 3 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB4 ( )

Returns the get end release setting turns on or off the DOF 4 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB5 ( )

Returns the get end release setting turns on or off the DOF 5 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::EndReleaseSetting NXOpen::CAE::BeamEADBuilder::EndReleaseB6 ( )

Returns the get end release setting turns on or off the DOF 6 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::State NXOpen::CAE::BeamEADBuilder::EndReleaseBState ( )

Returns the method to get the state of end release B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::SelectFENodeList* NXOpen::CAE::BeamEADBuilder::Node ( )

Returns the get node operator selects an orientation node
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::State NXOpen::CAE::BeamEADBuilder::OrientationState ( )

Returns the state drives the commit action
Created in NX6.0.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::CAE::BeamEADBuilder::OrientationMethod NXOpen::CAE::BeamEADBuilder::OriMethod ( )

Returns the method to get the element orientation method
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

NXOpen::Direction* NXOpen::CAE::BeamEADBuilder::SelectSectionOri ( )

Returns the get selection ori operator gets section orientaion value
Created in NX6.0.0.



License requirements : nx_masterfem ("Finite Element Modeling")

void NXOpen::CAE::BeamEADBuilder::SetEndOffsetAState ( NXOpen::CAE::BeamEADBuilder::State  endOffsetAState)

Sets the state drives the commit action
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endOffsetAStateendoffsetastate
void NXOpen::CAE::BeamEADBuilder::SetEndOffsetBState ( NXOpen::CAE::BeamEADBuilder::State  endOffsetBState)

Sets the state drives the commit action
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endOffsetBStateendoffsetbstate
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA1 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 1 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA2 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 2 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA3 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 3 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA4 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 4 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA5 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 5 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseA6 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 6 for end A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseAState ( NXOpen::CAE::BeamEADBuilder::State  endReleaseAState)

Sets the method to get the state of end release A
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseAStateendreleaseastate
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB1 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 1 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB2 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 2 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB3 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 3 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB4 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 4 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB5 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 5 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseB6 ( NXOpen::CAE::BeamEADBuilder::EndReleaseSetting  endReleaseSetting)

Sets the get end release setting turns on or off the DOF 6 for end B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseSettingendreleasesetting
void NXOpen::CAE::BeamEADBuilder::SetEndReleaseBState ( NXOpen::CAE::BeamEADBuilder::State  endReleaseBState)

Sets the method to get the state of end release B
Created in NX6.0.1.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
endReleaseBStateendreleasebstate
void NXOpen::CAE::BeamEADBuilder::SetOrientationState ( NXOpen::CAE::BeamEADBuilder::State  orientationState)

Sets the state drives the commit action
Created in NX6.0.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
orientationStateorientation state
void NXOpen::CAE::BeamEADBuilder::SetOriMethod ( NXOpen::CAE::BeamEADBuilder::OrientationMethod  oriMethod)

Sets the method to get the element orientation method
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
oriMethodorimethod
void NXOpen::CAE::BeamEADBuilder::SetSelectSectionOri ( NXOpen::Direction *  selectSectionOri)

Sets the get selection ori operator gets section orientaion value
Created in NX6.0.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
selectSectionOriselectsectionori
void NXOpen::CAE::BeamEADBuilder::SetVectorChoice ( NXOpen::CAE::BeamEADBuilder::VectorChoiceType  vectorChoice)

Sets the method to get the orientation vector choice
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

Parameters
vectorChoicevectorchoice
NXOpen::CAE::BeamEADBuilder::VectorChoiceType NXOpen::CAE::BeamEADBuilder::VectorChoice ( )

Returns the method to get the orientation vector choice
Created in NX7.5.0.



License requirements : nx_masterfem ("Finite Element Modeling")

The documentation for this class was generated from the following file:
Copyright 2013 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.