Represents a @link Features::TrimExtend Features::TrimExtend@endlink  builder
 <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimExtendBuilder  Features::FeatureCollection::CreateTrimExtendBuilder @endlink  <br>

Default values. More...

Inheritance diagram for NXOpen::Features::TrimExtendBuilder:

Public Types
enum	ArrowSideOptions { ArrowSideOptionsRetain, ArrowSideOptionsDelete }
	This enum represents the TrimExtend Arrow Side Options. More...

enum	CreationTypes { CreationTypesByDistance, CreationTypesPercentOfMeasured, CreationTypesUntilSelected, CreationTypesMakeCorner }
	This enum represents the TrimExtend types. More...

enum	ExtensionMethods { ExtensionMethodsNaturalCurvature, ExtensionMethodsNaturalTangent, ExtensionMethodsMirrored }
	This enum represents the TrimExtend Extension Methods. More...

Public Member Functions
NXOpen::Features::TrimExtendBuilder::ArrowSideOptions	ArrowSideOption ()
	Returns the trim and extend arrow side option to specify to retain or discard material in trim operations when Limits are set to Until Selected Created in NX5.0.0.

bool	ExtendNewFace ()
	Returns the extend new face to keep the original edges on the target or tool geometry Created in NX5.0.0.

NXOpen::Features::TrimExtendBuilder::ExtensionMethods	ExtensionMethod ()
	Returns the trim extend extension method to specify the continuity of an extend operation Created in NX5.0.0.

void	SetArrowSideOption (NXOpen::Features::TrimExtendBuilder::ArrowSideOptions arrowSideOption)
	Sets the trim and extend arrow side option to specify to retain or discard material in trim operations when Limits are set to Until Selected Created in NX5.0.0.

void	SetExtendNewFace (bool extendNewFace)
	Sets the extend new face to keep the original edges on the target or tool geometry Created in NX5.0.0.

void	SetExtensionMethod (NXOpen::Features::TrimExtendBuilder::ExtensionMethods extensionMethod)
	Sets the trim extend extension method to specify the continuity of an extend operation Created in NX5.0.0.

void	SetTargetReversed (bool targetReversed)
	Sets the target material side direction , targetReversed = true, means target direction is reversed Created in NX5.0.0.

void	SetTolerance (double tolerance)
	Sets the distance tolerance Created in NX5.0.0.

void	SetToolReversed (bool toolReversed)
	Sets the target material side direction , toolReversed = true, means tool direction is reversed Created in NX5.0.0.

void	SetType (NXOpen::Features::TrimExtendBuilder::CreationTypes type)
	Sets the trim extend creation option Created in NX5.0.0.

NXOpen::ScCollector *	TargetCollector ()
	Returns the target collector tool selection to specify the target for a trim or extend operation Created in NX5.0.0.

NXOpen::Expression *	TargetExtendDistance ()
	Returns the target extend distance Created in NX5.0.0.

bool	TargetReversed ()
	Returns the target material side direction , targetReversed = true, means target direction is reversed Created in NX5.0.0.

double	Tolerance ()
	Returns the distance tolerance Created in NX5.0.0.

NXOpen::ScCollector *	ToolCollector ()
	Returns the tool collector tool selection to specify the tool for a trim or extend operation Created in NX5.0.0.

NXOpen::Expression *	ToolExtendDistance ()
	Returns the tool extend distance Created in NX5.0.0.

bool	ToolReversed ()
	Returns the target material side direction , toolReversed = true, means tool direction is reversed Created in NX5.0.0.

NXOpen::Features::TrimExtendBuilder::CreationTypes	Type ()
	Returns the trim extend creation option Created in NX5.0.0.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a @link Features::TrimExtend Features::TrimExtend@endlink  builder
 <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateTrimExtendBuilder  Features::FeatureCollection::CreateTrimExtendBuilder @endlink  <br>

Default values.

Property

Value

ExtendNewFace

False

TargetExtendDistance.Value

25 (millimeters part), 1 (inches part)

ToolExtendDistance.Value

10

Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::Features::TrimExtendBuilder::ArrowSideOptions

This enum represents the TrimExtend Arrow Side Options.

Enumerator:

ArrowSideOptionsRetain	Retain.
ArrowSideOptionsDelete	Delete.

enum NXOpen::Features::TrimExtendBuilder::CreationTypes

This enum represents the TrimExtend types.

Enumerator:

CreationTypesByDistance	By Distance.
CreationTypesPercentOfMeasured	Percentage of Measured Edges.
CreationTypesUntilSelected	By Until Selected.
CreationTypesMakeCorner	Make Corner.

enum NXOpen::Features::TrimExtendBuilder::ExtensionMethods

This enum represents the TrimExtend Extension Methods.

Enumerator:

ExtensionMethodsNaturalCurvature	Natural Curvature.
ExtensionMethodsNaturalTangent	Natural Tangent.
ExtensionMethodsMirrored	Mirrored.

Member Function Documentation

NXOpen::Features::TrimExtendBuilder::ArrowSideOptions NXOpen::Features::TrimExtendBuilder::ArrowSideOption ( )

Returns the trim and extend arrow side option to specify to retain or discard material in trim operations when Limits are set to Until Selected
Created in NX5.0.0.

License requirements : None

bool NXOpen::Features::TrimExtendBuilder::ExtendNewFace ( )

Returns the extend new face to keep the original edges on the target or tool geometry
Created in NX5.0.0.

License requirements : None

NXOpen::Features::TrimExtendBuilder::ExtensionMethods NXOpen::Features::TrimExtendBuilder::ExtensionMethod ( )

Returns the trim extend extension method to specify the continuity of an extend operation
Created in NX5.0.0.

License requirements : None

void NXOpen::Features::TrimExtendBuilder::SetArrowSideOption ( NXOpen::Features::TrimExtendBuilder::ArrowSideOptions arrowSideOption )

Sets the trim and extend arrow side option to specify to retain or discard material in trim operations when Limits are set to Until Selected
Created in NX5.0.0.