NX Open C++ Reference Guide
Public Member Functions | List of all members
NXOpen::CAM::FeedsTurnBuilder Class Reference

Represents a turning feeds Builder
Created in NX5.0.0. More...

Inheritance diagram for NXOpen::CAM::FeedsTurnBuilder:
NXOpen::TaggedObject

Public Member Functions

NXOpen::CAM::InheritableFeedBuilder * ChamferFeed ()
 Returns the chamfer feed builder (inheritable Feed)
Created in NX8.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * EngageSpindleSpeedBuilder ()
 Returns the engage spindle speed builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * EngageSpindleSpeedToggleBuilder ()
 Returns the engage spindle speed toggle builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedApproachBuilder ()
 Returns the feed_approach builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedCutBuilder ()
 Returns the feed_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedDepartureBuilder ()
 Returns the feed_departure builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedEngageBuilder ()
 Returns the feed_engage builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedFirstCutBuilder ()
 Returns the feed_first_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * FeedMaxApproachLengthBuilder ()
 Returns the feed_max_approach_length builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * FeedMaxApproachLengthFlagBuilder ()
 Returns the feed_max_approach_length_flag builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * FeedMinAccelerateDecelerateLengthBuilder ()
 Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * FeedMinAccelerateDecelerateLengthFlagBuilder ()
 Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * FeedPerToothBuilder ()
 Returns the feed_per_tooth builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedRapidBuilder ()
 Returns the feed_rapid builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedModeBuilder * FeedRapidOutput ()
 Returns the feed rapid output builder (inheritable Enum)
Created in NX8.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateAccelerateBuilder ()
 Returns the feedrate_accelerate builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateAccelerateLengthBuilder ()
 Returns the feedrate_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCircCcwBuilder ()
 Returns the feedrate_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCircCwBuilder ()
 Returns the feedrate_circ_cw builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupCircCcwBuilder ()
 Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupCircCwBuilder ()
 Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupCutBuilder ()
 Returns the feedrate_cleanup_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupDiameterBuilder ()
 Returns the feedrate_cleanup_diameter builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupFaceBuilder ()
 Returns the feedrate_cleanup_face builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateCleanupLinearBuilder ()
 Returns the feedrate_cleanup_linear builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateClearBuilder ()
 Returns the feedrate_clear builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateDecelerateBuilder ()
 Returns the feedrate_decelerate builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateDecelerateLengthBuilder ()
 Returns the feedrate_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateDiameterBuilder ()
 Returns the feedrate_diameter builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFaceBuilder ()
 Returns the feedrate_face builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishAccelerateBuilder ()
 Returns the feedrate_finish_accelerate builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishAccelerateLengthBuilder ()
 Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishDecelerateBuilder ()
 Returns the feedrate_finish_decelerate builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishDecelerateLengthBuilder ()
 Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishRampInBuilder ()
 Returns the feedrate_finish_ramp_in builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishRampLevelBuilder ()
 Returns the feedrate_finish_ramp_level builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateFinishRampOutBuilder ()
 Returns the feedrate_finish_ramp_out builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateLinearBuilder ()
 Returns the feedrate_linear builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateProfileCutBuilder ()
 Returns the feedrate_profile_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateRampInBuilder ()
 Returns the feedrate_ramp_in builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateRampLevelBuilder ()
 Returns the feedrate_ramp_level builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateRampOutBuilder ()
 Returns the feedrate_ramp_out builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedrateRoughLastCutBuilder ()
 Returns the feedrate_rough_last_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * FeedrateRoughLastCutForEntirePassTogBuilder ()
 Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedRetractBuilder ()
 Returns the feed_retract builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedReturnBuilder ()
 Returns the feed_return builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedSideCutBuilder ()
 Returns the feed_side_cut builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedStepoverBuilder ()
 Returns the feed_stepover builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * FeedTraversalBuilder ()
 Returns the feed_traversal builder (inheritable Feed)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableFeedBuilder * RoundFeed ()
 Returns the round feed builder (inheritable Feed)
Created in NX8.0.0.
 
NXOpen::CAM::InheritableIntBuilder * SpindleDirectionAutomaticBuilder ()
 Returns the spindle_direction_automatic builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * SpindleDirectionBuilder ()
 Returns the spindle direction builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * SpindleMaximumRpmBuilder ()
 Returns the spindle_maximum_rpm builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * SpindleModeBuilder ()
 Returns the spindle_mode builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * SpindlePresetRpmBuilder ()
 Returns the spindle_preset_rpm builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * SpindlePresetRpmToggleBuilder ()
 Returns the spindle_preset_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableTextBuilder * SpindleRangeBuilder ()
 Returns the spindle_range builder (inheritable Text)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * SpindleRpmBuilder ()
 Returns the spindle_rpm builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * SpindleRpmToggleBuilder ()
 Returns the spindle_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableTextBuilder * SpindleTextBuilder ()
 Returns the spindle_text builder (inheritable Text)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableDoubleBuilder * SurfaceSpeedBuilder ()
 Returns the surface_speed builder (inheritable Double)
Created in NX5.0.0.
 
NXOpen::CAM::InheritableIntBuilder * ToolDirectionBuilder ()
 Returns the tool_direction builder (inheritable Int)
Created in NX5.0.0.
 
- Public Member Functions inherited from NXOpen::TaggedObject
tag_t GetTag () const
 
<b>Deprecated</b>:<br>

   Use Tag instead.

 
tag_t Tag () const
 Returns the tag of this object.
 

Detailed Description

Represents a turning feeds Builder
Created in NX5.0.0.


Member Function Documentation

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::ChamferFeed ( )

Returns the chamfer feed builder (inheritable Feed)
Created in NX8.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::EngageSpindleSpeedBuilder ( )

Returns the engage spindle speed builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::EngageSpindleSpeedToggleBuilder ( )

Returns the engage spindle speed toggle builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedApproachBuilder ( )

Returns the feed_approach builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedCutBuilder ( )

Returns the feed_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedDepartureBuilder ( )

Returns the feed_departure builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedEngageBuilder ( )

Returns the feed_engage builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedFirstCutBuilder ( )

Returns the feed_first_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMaxApproachLengthBuilder ( )

Returns the feed_max_approach_length builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMaxApproachLengthFlagBuilder ( )

Returns the feed_max_approach_length_flag builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMinAccelerateDecelerateLengthBuilder ( )

Returns the feed_min_accelerate_decelerate_length builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedMinAccelerateDecelerateLengthFlagBuilder ( )

Returns the feed_min_accelerate_decelerate_length_flag builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedPerToothBuilder ( )

Returns the feed_per_tooth builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRapidBuilder ( )

Returns the feed_rapid builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedModeBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRapidOutput ( )

Returns the feed rapid output builder (inheritable Enum)
Created in NX8.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateAccelerateBuilder ( )

Returns the feedrate_accelerate builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateAccelerateLengthBuilder ( )

Returns the feedrate_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCircCcwBuilder ( )

Returns the feedrate_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCircCwBuilder ( )

Returns the feedrate_circ_cw builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCircCcwBuilder ( )

Returns the feedrate_cleanup_circ_ccw builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCircCwBuilder ( )

Returns the feedrate_cleanup_circ_cw builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupCutBuilder ( )

Returns the feedrate_cleanup_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupDiameterBuilder ( )

Returns the feedrate_cleanup_diameter builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupFaceBuilder ( )

Returns the feedrate_cleanup_face builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateCleanupLinearBuilder ( )

Returns the feedrate_cleanup_linear builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateClearBuilder ( )

Returns the feedrate_clear builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDecelerateBuilder ( )

Returns the feedrate_decelerate builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDecelerateLengthBuilder ( )

Returns the feedrate_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateDiameterBuilder ( )

Returns the feedrate_diameter builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFaceBuilder ( )

Returns the feedrate_face builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishAccelerateBuilder ( )

Returns the feedrate_finish_accelerate builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishAccelerateLengthBuilder ( )

Returns the feedrate_finish_accelerate_length builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishDecelerateBuilder ( )

Returns the feedrate_finish_decelerate builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishDecelerateLengthBuilder ( )

Returns the feedrate_finish_decelerate_length builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampInBuilder ( )

Returns the feedrate_finish_ramp_in builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampLevelBuilder ( )

Returns the feedrate_finish_ramp_level builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateFinishRampOutBuilder ( )

Returns the feedrate_finish_ramp_out builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateLinearBuilder ( )

Returns the feedrate_linear builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateProfileCutBuilder ( )

Returns the feedrate_profile_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampInBuilder ( )

Returns the feedrate_ramp_in builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampLevelBuilder ( )

Returns the feedrate_ramp_level builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRampOutBuilder ( )

Returns the feedrate_ramp_out builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRoughLastCutBuilder ( )

Returns the feedrate_rough_last_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedrateRoughLastCutForEntirePassTogBuilder ( )

Returns the feedrate_rough_last_cut_for_entire_pass_tog builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedRetractBuilder ( )

Returns the feed_retract builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedReturnBuilder ( )

Returns the feed_return builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedSideCutBuilder ( )

Returns the feed_side_cut builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedStepoverBuilder ( )

Returns the feed_stepover builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::FeedTraversalBuilder ( )

Returns the feed_traversal builder (inheritable Feed)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableFeedBuilder* NXOpen::CAM::FeedsTurnBuilder::RoundFeed ( )

Returns the round feed builder (inheritable Feed)
Created in NX8.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleDirectionAutomaticBuilder ( )

Returns the spindle_direction_automatic builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleDirectionBuilder ( )

Returns the spindle direction builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleMaximumRpmBuilder ( )

Returns the spindle_maximum_rpm builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleModeBuilder ( )

Returns the spindle_mode builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindlePresetRpmBuilder ( )

Returns the spindle_preset_rpm builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindlePresetRpmToggleBuilder ( )

Returns the spindle_preset_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableTextBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRangeBuilder ( )

Returns the spindle_range builder (inheritable Text)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRpmBuilder ( )

Returns the spindle_rpm builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleRpmToggleBuilder ( )

Returns the spindle_rpm_toggle builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableTextBuilder* NXOpen::CAM::FeedsTurnBuilder::SpindleTextBuilder ( )

Returns the spindle_text builder (inheritable Text)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::FeedsTurnBuilder::SurfaceSpeedBuilder ( )

Returns the surface_speed builder (inheritable Double)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableIntBuilder* NXOpen::CAM::FeedsTurnBuilder::ToolDirectionBuilder ( )

Returns the tool_direction builder (inheritable Int)
Created in NX5.0.0.



License requirements : cam_base ("CAM BASE")

The documentation for this class was generated from the following file:
Copyright 2013 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.