Represents a @link Features::HolePackage Features::HolePackage@endlink  builder  <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateHolePackageBuilder  Features::FeatureCollection::CreateHolePackageBuilder @endlink  <br>

Default values. More...

Inheritance diagram for NXOpen::Features::HolePackageBuilder:

Public Types
enum	HoleDepthLimitOptions { HoleDepthLimitOptionsValue, HoleDepthLimitOptionsUntilSelected, HoleDepthLimitOptionsUntilNext, HoleDepthLimitOptionsThroughBody }
	Represents hole depth limit options. More...

enum	HoleForms { HoleFormsSimple, HoleFormsCounterbored, HoleFormsCountersink, HoleFormsTapered }
	Represents hole form options. More...

enum	ThreadLengthOptions { ThreadLengthOptionsDiameterx1, ThreadLengthOptionsDiameterx15, ThreadLengthOptionsDiameterx20, ThreadLengthOptionsDiameterx25, ThreadLengthOptionsDiameterx30, ThreadLengthOptionsStandard, ThreadLengthOptionsCustom, ThreadLengthOptionsFull }
	Represents thread length options. More...

enum	ThreadRotationOptions { ThreadRotationOptionsRight, ThreadRotationOptionsLeft }
	Represents thread rotation options. More...

enum	Types { TypesGeneralHole, TypesDrillSizeHole, TypesScrewClearanceHole, TypesThreadedHole, TypesHoleSeries }
	Represents hole types. More...

Public Member Functions
NXOpen::GeometricUtilities::BooleanOperation *	BooleanOperation ()
	Returns the boolean operation Created in NX5.0.2.

NXString	DrillSize ()
	Returns the drill size - this is applicable for drill size hole Created in NX6.0.0.

NXOpen::Expression *	DrillSizeEndChamferAngle ()
	Returns the drill size end chamfer angle - this is applicable for drill size hole type Created in NX6.0.0.

bool	DrillSizeEndChamferEnabled ()
	Returns the drill size end chamfer enabled - this is applicable for drill size hole type Created in NX6.0.0.

NXOpen::Expression *	DrillSizeEndChamferOffset ()
	Returns the drill size end chamfer offset - this is applicable for drill size hole type Created in NX6.0.0.

NXString	DrillSizeFitOption ()
	Returns the drill size screw fit Option - this is applicable for drill size hole Created in NX6.0.0.

NXOpen::Expression *	DrillSizeHoleDepth ()
	Returns the hole depth - this is applicable for drill size hole Created in NX6.0.0.

NXOpen::Expression *	DrillSizeHoleDiameter ()
	Returns the hole diameter - this is applicable for drill size hole Created in NX6.0.0.

NXString	DrillSizeStandard ()
	Returns the drill size standard - this is applicable for drill size hole type Created in NX6.0.0.

NXOpen::Expression *	DrillSizeStartChamferAngle ()
	Returns the drill size start chamfer angle - this is applicable for drill size hole type Created in NX6.0.0.

bool	DrillSizeStartChamferEnabled ()
	Returns the drill size start chamfer enabled - this is applicable for drill size hole type Created in NX6.0.0.

NXOpen::Expression *	DrillSizeStartChamferOffset ()
	Returns the drill size start chamfer offset - this is applicable for drill size hole type Created in NX6.0.0.

NXOpen::Expression *	DrillSizeTipAngle ()
	Returns the tip angle - this is applicable for drill size hole Created in NX6.0.0.

NXOpen::GeometricUtilities::EndHoleData *	EndHoleData ()
	Returns the target body Created in NX5.0.2.

NXOpen::Expression *	GeneralCounterboreDepth ()
	Returns the counter bore depth - this is applicable for general hole Created in NX5.0.2.

NXOpen::Expression *	GeneralCounterboreDiameter ()
	Returns the counter bore diameter - this is applicable for general hole Created in NX5.0.2.

NXOpen::Expression *	GeneralCounterboreHoleDepth ()
	Returns the counterbore hole depth - this is applicable for general hole counterbore form Created in NX6.0.0.

NXOpen::Expression *	GeneralCounterboreHoleDiameter ()
	Returns the counterbore hole diameter - this is applicable for general hole counterbore form Created in NX6.0.0.

NXOpen::Expression *	GeneralCountersinkAngle ()
	Returns the counter sink angle - this is applicable for general hole Created in NX5.0.2.

NXOpen::Expression *	GeneralCountersinkDiameter ()
	Returns the counter sink diameter - this is applicable for general hole Created in NX5.0.2.

NXOpen::Expression *	GeneralCountersinkHoleDepth ()
	Returns the countersink hole depth - this is applicable for general hole countersink form Created in NX6.0.0.

NXOpen::Expression *	GeneralCountersinkHoleDiameter ()
	Returns the countersink hole diameter - this is applicable for general hole countersink form Created in NX6.0.0.

NXOpen::Features::HolePackageBuilder::HoleForms	GeneralHoleForm ()
	Returns the hole form - this is applicable for general hole Created in NX5.0.2.

NXOpen::Expression *	GeneralSimpleHoleDepth ()
	Returns the simple hole depth - this is applicable for general hole simple form Created in NX6.0.0.

NXOpen::Expression *	GeneralSimpleHoleDiameter ()
	Returns the simple hole diameter - this is applicable for general hole simple form Created in NX6.0.0.

NXOpen::Expression *	GeneralTaperAngle ()
	Returns the taper angle - this is applicable for general hole Created in NX6.0.0.

NXOpen::Expression *	GeneralTaperedHoleDepth ()
	Returns the tapered hole depth - this is applicable for general hole tapered form Created in NX6.0.0.

NXOpen::Expression *	GeneralTaperedHoleDiameter ()
	Returns the tapered hole diameter - this is applicable for general hole tapered form Created in NX6.0.0.

NXOpen::Expression *	GeneralTipAngle ()
	Returns the tip angle - this is applicable for general hole Created in NX5.0.2.

NXOpen::Features::HolePackageBuilder::HoleDepthLimitOptions	HoleDepthLimitOption ()
	Returns the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type Created in NX5.0.2.

NXOpen::Section *	HolePosition ()
	Returns the hole position Created in NX5.0.2.

NXOpen::GeometricUtilities::MiddleHoleData *	MiddleHoleData ()
	Returns the target body Created in NX5.0.2.

bool	NeckChamferEnabled ()
	Returns the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form Created in NX5.0.2.

NXOpen::GeometricUtilities::ProjectionOptions *	ProjectionDirection ()
	Returns the hole direction options Created in NX5.0.2.

NXString	RadialEngageOption ()
	Returns the radial engage option - this is applicable for screw clearence hole Created in NX5.0.2.

bool	ReliefChamferEnabled ()
	Returns the threaded relief chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceCounterboreDepth ()
	Returns the counter bore depth - this is applicable for screw clearence hole Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceCounterboreDiameter ()
	Returns the counter bore diameter - this is applicable for screw clearence hole Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceCountersinkAngle ()
	Returns the counter sink angle - this is applicable for screw clearence hole Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceCountersinkDiameter ()
	Returns the counter sink diameter - this is applicable for screw clearence hole Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceEndChamferAngle ()
	Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type Created in NX5.0.2.

bool	ScrewClearanceEndChamferEnabled ()
	Returns the end chamfer enabled - this is applicable for screw clearance hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceEndChamferOffset ()
	Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceHoleDepth ()
	Returns the hole depth - this is applicable for screw clearance hole Created in NX6.0.0.

NXOpen::Expression *	ScrewClearanceHoleDiameter ()
	Returns the hole diameter - this is applicable for screw clearence hole Created in NX5.0.2.

NXOpen::Features::HolePackageBuilder::HoleForms	ScrewClearanceHoleForm ()
	Returns the hole form - this is applicable for screw clearance hole Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceNeckChamferAngle ()
	Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceNeckChamferOffset ()
	Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceReliefDepth ()
	Returns the relief depth - this is applicable for screw clearence hole type Created in NX5.0.2.

bool	ScrewClearanceReliefEnabled ()
	Returns the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceStartChamferAngle ()
	Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type Created in NX5.0.2.

bool	ScrewClearanceStartChamferEnabled ()
	Returns the screw clearance start chamfer enabled - this is applicable for screw clearance hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceStartChamferOffset ()
	Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type Created in NX5.0.2.

NXOpen::Expression *	ScrewClearanceTipAngle ()
	Returns the tip angle - this is applicable for screw clearance hole Created in NX6.0.0.

NXString	ScrewFitOption ()
	Returns the screw fit Option - this is applicable for screw clearence hole Created in NX5.0.2.

NXString	ScrewSize ()
	Returns the screw size - this is applicable for screw clearence hole Created in NX5.0.2.

NXString	ScrewStandard ()
	Returns the screw standard - this is applicable for screw clearence hole type Created in NX5.0.2.

NXString	ScrewType ()
	Returns the screw type - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetDrillSize (const NXString &drillSize)
	Sets the drill size - this is applicable for drill size hole Created in NX6.0.0.

void	SetDrillSize (const char *drillSize)
	Sets the drill size - this is applicable for drill size hole Created in NX6.0.0.

void	SetDrillSizeEndChamferEnabled (bool drillSizeEndChamferEnabled)
	Sets the drill size end chamfer enabled - this is applicable for drill size hole type Created in NX6.0.0.

void	SetDrillSizeFitOption (const NXString &drillSizeFitOption)
	Sets the drill size screw fit Option - this is applicable for drill size hole Created in NX6.0.0.

void	SetDrillSizeFitOption (const char *drillSizeFitOption)
	Sets the drill size screw fit Option - this is applicable for drill size hole Created in NX6.0.0.

void	SetDrillSizeStandard (const NXString &drillSizeStandard)
	Sets the drill size standard - this is applicable for drill size hole type Created in NX6.0.0.

void	SetDrillSizeStandard (const char *drillSizeStandard)
	Sets the drill size standard - this is applicable for drill size hole type Created in NX6.0.0.

void	SetDrillSizeStartChamferEnabled (bool drillSizeStartChamferEnabled)
	Sets the drill size start chamfer enabled - this is applicable for drill size hole type Created in NX6.0.0.

void	SetGeneralHoleForm (NXOpen::Features::HolePackageBuilder::HoleForms holeForm)
	Sets the hole form - this is applicable for general hole Created in NX5.0.2.

void	SetHoleDepthLimitOption (NXOpen::Features::HolePackageBuilder::HoleDepthLimitOptions holeDepthLimitOption)
	Sets the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type Created in NX5.0.2.

void	SetNeckChamferEnabled (bool neckChamferEnabled)
	Sets the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form Created in NX5.0.2.

void	SetRadialEngageOption (const NXString &radialEngageOption)
	Sets the radial engage option - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetRadialEngageOption (const char *radialEngageOption)
	Sets the radial engage option - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetReliefChamferEnabled (bool reliefChamferEnabled)
	Sets the threaded relief chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

void	SetScrewClearanceEndChamferEnabled (bool screwClearanceEndChamferEnabled)
	Sets the end chamfer enabled - this is applicable for screw clearance hole type Created in NX5.0.2.

void	SetScrewClearanceHoleForm (NXOpen::Features::HolePackageBuilder::HoleForms holeForm)
	Sets the hole form - this is applicable for screw clearance hole Created in NX5.0.2.

void	SetScrewClearanceReliefEnabled (bool screwClearanceReliefEnabled)
	Sets the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type Created in NX5.0.2.

void	SetScrewClearanceStartChamferEnabled (bool screwClearanceStartChamferEnabled)
	Sets the screw clearance start chamfer enabled - this is applicable for screw clearance hole type Created in NX5.0.2.

void	SetScrewFitOption (const NXString &screwFitOption)
	Sets the screw fit Option - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetScrewFitOption (const char *screwFitOption)
	Sets the screw fit Option - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetScrewSize (const NXString &screwSize)
	Sets the screw size - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetScrewSize (const char *screwSize)
	Sets the screw size - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetScrewStandard (const NXString &screwStandard)
	Sets the screw standard - this is applicable for screw clearence hole type Created in NX5.0.2.

void	SetScrewStandard (const char *screwStandard)
	Sets the screw standard - this is applicable for screw clearence hole type Created in NX5.0.2.

void	SetScrewType (const NXString &screwType)
	Sets the screw type - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetScrewType (const char *screwType)
	Sets the screw type - this is applicable for screw clearence hole Created in NX5.0.2.

void	SetStartExtensionEnabled (bool startExtensionEnabled)
	Sets the extend start enabled - this is applicable for start extension to all hole types Created in NX7.5.0.

void	SetThreadedEndChamferEnabled (bool threadedEndChamferEnabled)
	Sets the threaded end chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

void	SetThreadedReliefEnabled (bool threadedReliefEnabled)
	Sets the threaded relief enabled - this is applicable for threaded hole type Created in NX5.0.2.

void	SetThreadedStartChamferEnabled (bool threadedStartChamferEnabled)
	Sets the threaded start chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

void	SetThreadLengthOption (NXOpen::Features::HolePackageBuilder::ThreadLengthOptions threadLengthOption)
	Sets the thread length option - this is applicable for threaded hole Created in NX5.0.2.

void	SetThreadRotation (NXOpen::Features::HolePackageBuilder::ThreadRotationOptions threadRotation)
	Sets the thread rotation - this is applicable for threaded hole Created in NX5.0.2.

void	SetThreadSize (const NXString &threadSize)
	Sets the thread size - this is applicable for threaded hole Created in NX5.0.2.

void	SetThreadSize (const char *threadSize)
	Sets the thread size - this is applicable for threaded hole Created in NX5.0.2.

void	SetThreadStandard (const NXString &threadStandard)
	Sets the thread standard - this is applicable for threaded hole type Created in NX5.0.2.

void	SetThreadStandard (const char *threadStandard)
	Sets the thread standard - this is applicable for threaded hole type Created in NX5.0.2.

void	SetTolerance (double tolerance)
	Sets the distance tolerance Created in NX5.0.2.

void	SetType (NXOpen::Features::HolePackageBuilder::Types type)
	Sets the type Created in NX5.0.2.

bool	StartExtensionEnabled ()
	Returns the extend start enabled - this is applicable for start extension to all hole types Created in NX7.5.0.

NXOpen::GeometricUtilities::StartHoleData *	StartHoleData ()
	Returns the start target body Created in NX5.0.2.

NXOpen::Expression *	TapDrillDiameter ()
	Returns the tap drill diameter - this is applicable for threaded hole Created in NX5.0.2.

NXOpen::Expression *	ThreadDepth ()
	Returns the thread depth - this is applicable for threaded hole Created in NX5.0.2.

NXOpen::Expression *	ThreadedEndChamferAngle ()
	Returns the threaded end chamfer angle - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedEndChamferDiameter ()
	Returns the threaded end chamfer offset - this is applicable for threaded hole type Created in NX5.0.2.

bool	ThreadedEndChamferEnabled ()
	Returns the threaded end chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedHoleDepth ()
	Returns the hole depth - this is applicable for threaded hole Created in NX5.0.2.

NXOpen::Expression *	ThreadedReliefAngle ()
	Returns the relief angle - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedReliefChamferAngle ()
	Returns the threaded relief chamfer angle - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedReliefChamferOffset ()
	Returns the threaded relief chamfer offset - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedReliefDepth ()
	Returns the threaded relief depth - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedReliefDiameter ()
	Returns the relief diameter - this is applicable for threaded hole type Created in NX5.0.2.

bool	ThreadedReliefEnabled ()
	Returns the threaded relief enabled - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedStartChamferAngle ()
	Returns the threaded start chamfer angle - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedStartChamferDiameter ()
	Returns the threaded start chamfer offset - this is applicable for threaded hole type Created in NX5.0.2.

bool	ThreadedStartChamferEnabled ()
	Returns the threaded start chamfer enabled - this is applicable for threaded hole type Created in NX5.0.2.

NXOpen::Expression *	ThreadedTipAngle ()
	Returns the tip angle - this is applicable for threaded hole Created in NX5.0.2.

NXOpen::Features::HolePackageBuilder::ThreadLengthOptions	ThreadLengthOption ()
	Returns the thread length option - this is applicable for threaded hole Created in NX5.0.2.

NXOpen::Features::HolePackageBuilder::ThreadRotationOptions	ThreadRotation ()
	Returns the thread rotation - this is applicable for threaded hole Created in NX5.0.2.

NXString	ThreadSize ()
	Returns the thread size - this is applicable for threaded hole Created in NX5.0.2.

NXString	ThreadStandard ()
	Returns the thread standard - this is applicable for threaded hole type Created in NX5.0.2.

double	Tolerance ()
	Returns the distance tolerance Created in NX5.0.2.

NXOpen::Features::HolePackageBuilder::Types	Type ()
	Returns the type Created in NX5.0.2.

NXOpen::SelectDisplayableObject *	UntilSelectedTarget ()
	Returns the until selected target - this is applicable for general hole, threaded hole and drill size hole type Created in NX5.0.2.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a @link Features::HolePackage Features::HolePackage@endlink  builder  <br> To create a new instance of this class, use @link Features::FeatureCollection::CreateHolePackageBuilder  Features::FeatureCollection::CreateHolePackageBuilder @endlink  <br>

Default values.

Property

Value

BooleanOperation.Type

Subtract

DrillSizeEndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

DrillSizeEndChamferEnabled

true

DrillSizeEndChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

DrillSizeHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

DrillSizeHoleDiameter.Value

11.0 (millimeters part), 0.4 (inches part)

DrillSizeStartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

DrillSizeStartChamferEnabled

true

DrillSizeStartChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

DrillSizeTipAngle.Value

118

EndHoleData.BooleanOperation.Type

Subtract

EndHoleData.HoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

EndHoleData.HoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

EndHoleData.MatchDimOfStartHole

true

EndHoleData.ScrewClearanceEndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

EndHoleData.ScrewClearanceEndChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

EndHoleData.ScrewClearanceStartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

EndHoleData.ScrewClearanceStartChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

EndHoleData.TapDrillDiameter.Value

8.5 (millimeters part), 0.34 (inches part)

EndHoleData.ThreadDepth.Value

25.0 (millimeters part), 1.0 (inches part)

EndHoleData.ThreadLengthOption

Custom

EndHoleData.ThreadedEndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

EndHoleData.ThreadedEndChamferDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

EndHoleData.ThreadedReliefAngle.Value

118.0 (millimeters part), 118.0 (inches part)

EndHoleData.ThreadedReliefChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

EndHoleData.ThreadedReliefChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

EndHoleData.ThreadedReliefDepth.Value

5.0 (millimeters part), 0.2 (inches part)

EndHoleData.ThreadedReliefDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

EndHoleData.ThreadedStartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

EndHoleData.ThreadedStartChamferDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

EndHoleData.TipAngle.Value

118

GeneralCounterboreDepth.Value

25.0 (millimeters part), 1.0 (inches part)

GeneralCounterboreDiameter.Value

38.0 (millimeters part), 1.5 (inches part)

GeneralCounterboreHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

GeneralCounterboreHoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

GeneralCountersinkAngle.Value

90 (millimeters part), 82 (inches part)

GeneralCountersinkDiameter.Value

50.0 (millimeters part), 2.0 (inches part)

GeneralCountersinkHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

GeneralCountersinkHoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

GeneralHoleForm

Simple

GeneralSimpleHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

GeneralSimpleHoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

GeneralTaperAngle.Value

10

GeneralTaperedHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

GeneralTaperedHoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

GeneralTipAngle.Value

118 (millimeters part), 118 (inches part)

MiddleHoleData.BooleanOperation.Type

Subtract

MiddleHoleData.EndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

MiddleHoleData.EndChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

MiddleHoleData.HoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

MiddleHoleData.MatchDimOfStartHole

true

MiddleHoleData.StartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

MiddleHoleData.StartChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

ScrewClearanceCounterboreDepth.Value

10.8 (millimeters part), 0.43 (inches part)

ScrewClearanceCounterboreDiameter.Value

18.0 (millimeters part), 0.72 (inches part)

ScrewClearanceCountersinkAngle.Value

90 (millimeters part), 82 (inches part)

ScrewClearanceCountersinkDiameter.Value

22.73 (millimeters part), 0.91 (inches part)

ScrewClearanceEndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ScrewClearanceEndChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

ScrewClearanceHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

ScrewClearanceHoleDiameter.Value

11.0 (millimeters part), 0.4 (inches part)

ScrewClearanceHoleForm

Simple

ScrewClearanceNeckChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ScrewClearanceNeckChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

ScrewClearanceReliefDepth.Value

1.2 (millimeters part), 0.05 (inches part)

ScrewClearanceStartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ScrewClearanceStartChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

ScrewClearanceTipAngle.Value

118

StartExtensionEnabled

True

StartHoleData.BooleanOperation.Type

Subtract

StartHoleData.CounterboreDepth.Value

25.0 (millimeters part), 1.0 (inches part)

StartHoleData.CounterboreDiameter.Value

38.0 (millimeters part), 1.5 (inches part)

StartHoleData.CountersinkAngle.Value

90 (millimeters part), 82 (inches part)

StartHoleData.CountersinkDiameter.Value

50.0 (millimeters part), 2.0 (inches part)

StartHoleData.EndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

StartHoleData.EndChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

StartHoleData.HoleDiameter.Value

25.0 (millimeters part), 1.0 (inches part)

StartHoleData.HoleForm

Simple

StartHoleData.NeckChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

StartHoleData.NeckChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

StartHoleData.ReliefDepth.Value

1.2 (millimeters part), 0.05 (inches part)

StartHoleData.StartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

StartHoleData.StartChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

TapDrillDiameter.Value

8.5 (millimeters part), 0.34 (inches part)

ThreadDepth.Value

25.0 (millimeters part), 1.0 (inches part)

ThreadLengthOption

Custom

ThreadRotation

Right

ThreadedEndChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ThreadedEndChamferDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

ThreadedHoleDepth.Value

50.0 (millimeters part), 2.0 (inches part)

ThreadedReliefAngle.Value

118.0 (millimeters part), 118.0 (inches part)

ThreadedReliefChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ThreadedReliefChamferOffset.Value

0.6 (millimeters part), 0.024 (inches part)

ThreadedReliefDepth.Value

5.0 (millimeters part), 0.2 (inches part)

ThreadedReliefDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

ThreadedStartChamferAngle.Value

45.0 (millimeters part), 45.0 (inches part)

ThreadedStartChamferDiameter.Value

10.0 (millimeters part), 0.4 (inches part)

ThreadedTipAngle.Value

118 (millimeters part), 118 (inches part)

Type

GeneralHole

Created in NX5.0.2.

Member Enumeration Documentation

enum NXOpen::Features::HolePackageBuilder::HoleDepthLimitOptions

Represents hole depth limit options.

Enumerator:

HoleDepthLimitOptionsValue	Value limit options.
HoleDepthLimitOptionsUntilSelected	Until selected limit options.
HoleDepthLimitOptionsUntilNext	Until next limit options.
HoleDepthLimitOptionsThroughBody	Through body limit options.

enum NXOpen::Features::HolePackageBuilder::HoleForms

Represents hole form options.

Enumerator:

HoleFormsSimple	Simple hole form.
HoleFormsCounterbored	Counterbored hole form.
HoleFormsCountersink	Countersink hole form.
HoleFormsTapered	Tapered hole form.

enum NXOpen::Features::HolePackageBuilder::ThreadLengthOptions

Represents thread length options.

This option is applicable for the threaded hole.

Enumerator:

ThreadLengthOptionsDiameterx1	1 * (tap drill diameter)
ThreadLengthOptionsDiameterx15	1.5 * (tap drill diameter)
ThreadLengthOptionsDiameterx20	2 * (tap drill diameter)
ThreadLengthOptionsDiameterx25	2.5 * (tap drill diameter)
ThreadLengthOptionsDiameterx30	3 * (tap drill diameter)
ThreadLengthOptionsStandard	Length is Standard.
ThreadLengthOptionsCustom	Length is custom.
ThreadLengthOptionsFull	Length is full hole depth.

enum NXOpen::Features::HolePackageBuilder::ThreadRotationOptions

Represents thread rotation options.

Enumerator:

ThreadRotationOptionsRight	Right rotation.
ThreadRotationOptionsLeft	Left rotation.

enum NXOpen::Features::HolePackageBuilder::Types

Represents hole types.

Enumerator:

TypesGeneralHole	General hole.
TypesDrillSizeHole	Drill Size hole.
TypesScrewClearanceHole	Screw clearance hole.
TypesThreadedHole	Threaded hole.
TypesHoleSeries	Hole series.

Member Function Documentation

NXOpen::GeometricUtilities::BooleanOperation* NXOpen::Features::HolePackageBuilder::BooleanOperation ( )

Returns the boolean operation
Created in NX5.0.2.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::DrillSize ( )

Returns the drill size - this is applicable for drill size hole
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeEndChamferAngle ( )

Returns the drill size end chamfer angle - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::DrillSizeEndChamferEnabled ( )

Returns the drill size end chamfer enabled - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeEndChamferOffset ( )

Returns the drill size end chamfer offset - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::DrillSizeFitOption ( )

Returns the drill size screw fit Option - this is applicable for drill size hole
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeHoleDepth ( )

Returns the hole depth - this is applicable for drill size hole
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeHoleDiameter ( )

Returns the hole diameter - this is applicable for drill size hole
Created in NX6.0.0.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::DrillSizeStandard ( )

Returns the drill size standard - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeStartChamferAngle ( )

Returns the drill size start chamfer angle - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::DrillSizeStartChamferEnabled ( )

Returns the drill size start chamfer enabled - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeStartChamferOffset ( )

Returns the drill size start chamfer offset - this is applicable for drill size hole type
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::DrillSizeTipAngle ( )

Returns the tip angle - this is applicable for drill size hole
Created in NX6.0.0.

License requirements : None

NXOpen::GeometricUtilities::EndHoleData* NXOpen::Features::HolePackageBuilder::EndHoleData ( )

Returns the target body
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCounterboreDepth ( )

Returns the counter bore depth - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCounterboreDiameter ( )

Returns the counter bore diameter - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCounterboreHoleDepth ( )

Returns the counterbore hole depth - this is applicable for general hole counterbore form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCounterboreHoleDiameter ( )

Returns the counterbore hole diameter - this is applicable for general hole counterbore form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCountersinkAngle ( )

Returns the counter sink angle - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCountersinkDiameter ( )

Returns the counter sink diameter - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCountersinkHoleDepth ( )

Returns the countersink hole depth - this is applicable for general hole countersink form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralCountersinkHoleDiameter ( )

Returns the countersink hole diameter - this is applicable for general hole countersink form
Created in NX6.0.0.

License requirements : None

NXOpen::Features::HolePackageBuilder::HoleForms NXOpen::Features::HolePackageBuilder::GeneralHoleForm ( )

Returns the hole form - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralSimpleHoleDepth ( )

Returns the simple hole depth - this is applicable for general hole simple form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralSimpleHoleDiameter ( )

Returns the simple hole diameter - this is applicable for general hole simple form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralTaperAngle ( )

Returns the taper angle - this is applicable for general hole
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralTaperedHoleDepth ( )

Returns the tapered hole depth - this is applicable for general hole tapered form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralTaperedHoleDiameter ( )

Returns the tapered hole diameter - this is applicable for general hole tapered form
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::GeneralTipAngle ( )

Returns the tip angle - this is applicable for general hole
Created in NX5.0.2.

License requirements : None

NXOpen::Features::HolePackageBuilder::HoleDepthLimitOptions NXOpen::Features::HolePackageBuilder::HoleDepthLimitOption ( )

Returns the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Section* NXOpen::Features::HolePackageBuilder::HolePosition ( )

Returns the hole position
Created in NX5.0.2.

License requirements : None

NXOpen::GeometricUtilities::MiddleHoleData* NXOpen::Features::HolePackageBuilder::MiddleHoleData ( )

Returns the target body
Created in NX5.0.2.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::NeckChamferEnabled ( )

Returns the neck chamfer enabled - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2.

License requirements : None

NXOpen::GeometricUtilities::ProjectionOptions* NXOpen::Features::HolePackageBuilder::ProjectionDirection ( )

Returns the hole direction options
Created in NX5.0.2.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::RadialEngageOption ( )

Returns the radial engage option - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::ReliefChamferEnabled ( )

Returns the threaded relief chamfer enabled - this is applicable for threaded hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceCounterboreDepth ( )

Returns the counter bore depth - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceCounterboreDiameter ( )

Returns the counter bore diameter - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceCountersinkAngle ( )

Returns the counter sink angle - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceCountersinkDiameter ( )

Returns the counter sink diameter - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceEndChamferAngle ( )

Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::ScrewClearanceEndChamferEnabled ( )

Returns the end chamfer enabled - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceEndChamferOffset ( )

Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceHoleDepth ( )

Returns the hole depth - this is applicable for screw clearance hole
Created in NX6.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceHoleDiameter ( )

Returns the hole diameter - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXOpen::Features::HolePackageBuilder::HoleForms NXOpen::Features::HolePackageBuilder::ScrewClearanceHoleForm ( )

Returns the hole form - this is applicable for screw clearance hole
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceNeckChamferAngle ( )

Returns the neck chamfer angle - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceNeckChamferOffset ( )

Returns the neck chamfer offset - this is applicable for screw clearence hole type with counterbore hole form
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceReliefDepth ( )

Returns the relief depth - this is applicable for screw clearence hole type
Created in NX5.0.2.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::ScrewClearanceReliefEnabled ( )

Returns the relief enabled - this is applicable for screw clearence hole type with countersunk hole form and threaded hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceStartChamferAngle ( )

Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

bool NXOpen::Features::HolePackageBuilder::ScrewClearanceStartChamferEnabled ( )

Returns the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceStartChamferOffset ( )

Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
Created in NX5.0.2.

License requirements : None

NXOpen::Expression* NXOpen::Features::HolePackageBuilder::ScrewClearanceTipAngle ( )

Returns the tip angle - this is applicable for screw clearance hole
Created in NX6.0.0.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::ScrewFitOption ( )

Returns the screw fit Option - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::ScrewSize ( )

Returns the screw size - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::ScrewStandard ( )

Returns the screw standard - this is applicable for screw clearence hole type
Created in NX5.0.2.

License requirements : None

NXString NXOpen::Features::HolePackageBuilder::ScrewType ( )

Returns the screw type - this is applicable for screw clearence hole
Created in NX5.0.2.

License requirements : None

void NXOpen::Features::HolePackageBuilder::SetDrillSize ( const NXString & drillSize )

Sets the drill size - this is applicable for drill size hole
Created in NX6.0.0.