NXOpen::Features::SmoothCurveStringBuilder Class Reference

Represents a @link Features::SmoothCurveString Features::SmoothCurveString@endlink  builder
 <br> To create a new instance of this class, use @link Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder  Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder @endlink  <br> 

Default values. More...

Inheritance diagram for NXOpen::Features::SmoothCurveStringBuilder:

Public Types
enum	LevelTypes { LevelTypesG0, LevelTypesG1, LevelTypesG2 }
	the smoothing levels. More...
enum	MergeTypes { MergeTypesNone, MergeTypesSameTypes, MergeTypesAllCurves }
	the options to merge curves after being made continuous. More...
enum	Types { TypesFreeCurves, TypesCurvesOnSurfaces }
	the type of input curves. More...

Public Member Functions
bool	AddFillets ()
	Returns a flag to add transition fillets to sharp edges with a specified radius.
NXOpen::Expression *	AngularThreshold ()
	Returns the angular threshold when trying to connect curves.
NXOpen::GeometricUtilities::CurveFitData *	CurveFitData ()
	Returns the curve fitting for curves if the user specifies merge curves.
NXOpen::GeometricUtilities::CurveOptions *	CurveOptions ()
	Returns the curve options.
NXOpen::Section *	Curves ()
	Returns the curves to be made continuous.
NXOpen::Expression *	DistanceThreshold ()
	Returns the searching distance threshold when trying to connect curves.
NXOpen::SelectCurveList *	FixedCurves ()
	Returns the optional curves which are to remain fixed.
NXOpen::Features::SmoothCurveStringBuilder::LevelTypes	LevelType ()
	Returns the smoothing level of how continuous the output should be.
NXOpen::Features::SmoothCurveStringBuilder::MergeTypes	MergeType ()
	Returns the curve types if any to merge after they are made continuous.
NXOpen::Expression *	Radius ()
	Returns the radius for transition fillets.
void	SetAddFillets (bool addFillets)
	Sets a flag to add transition fillets to sharp edges with a specified radius.
void	SetLevelType (NXOpen::Features::SmoothCurveStringBuilder::LevelTypes level)
	Sets the smoothing level of how continuous the output should be.
void	SetMergeType (NXOpen::Features::SmoothCurveStringBuilder::MergeTypes merge)
	Sets the curve types if any to merge after they are made continuous.
void	SetType (NXOpen::Features::SmoothCurveStringBuilder::Types type)
	Sets the type of input curves whether free or on surface.
NXOpen::ScCollector *	SupportFaces ()
	Returns the optional support faces.
NXOpen::Expression *	Tolerance ()
	Returns the maximum lateral deviation between input and output.
NXOpen::Features::SmoothCurveStringBuilder::Types	Type ()
	Returns the type of input curves whether free or on surface.
void	UpdateOnExpressionChange ()
	Updates when any expression in the function changes Created in NX9.0.0.
Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.
NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.
void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.
bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.
NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.
void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.
void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.
void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.
NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.
void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.
Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.
void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.
std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.
NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.
void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.
Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br>    Use Tag instead.
tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a @link Features::SmoothCurveString Features::SmoothCurveString@endlink  builder
 <br> To create a new instance of this class, use @link Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder  Features::FreeformCurveCollection::CreateSmoothCurveStringBuilder @endlink  <br> 

Default values.

Property	Value
AddFillets	0
AngularThreshold.Value	5
CurveFitData.CurveJoinMethod	No
CurveFitData.Degree	7
CurveFitData.FitMethod	DegreeAndSegments
CurveFitData.IsAdvancedFit	0
CurveFitData.IsAlignShape	0
CurveFitData.MaximumDegree	7
CurveFitData.MaximumSegments	1
CurveFitData.MinimumDegree	5
CurveFitData.Segments	1
LevelType	G0
MergeType	None
Radius.Value	5 (millimeters part), 0.2 (inches part)
Tolerance.Value	0.1 (millimeters part), 0.005 (inches part)

Created in NX9.0.0.

Member Enumeration Documentation

enum NXOpen::Features::SmoothCurveStringBuilder::LevelTypes

the smoothing levels.

Enumerator:

LevelTypesG0	smoothing by position
LevelTypesG1	smoothing by tangent
LevelTypesG2	smoothing by curvature

enum NXOpen::Features::SmoothCurveStringBuilder::MergeTypes

the options to merge curves after being made continuous.

Enumerator:

MergeTypesNone	no merging of curves
MergeTypesSameTypes	merge only spline curves
MergeTypesAllCurves	merge all types of curves

enum NXOpen::Features::SmoothCurveStringBuilder::Types

the type of input curves.

Enumerator:

TypesFreeCurves	free curves
TypesCurvesOnSurfaces	curves on surfaces

Member Function Documentation

bool NXOpen::Features::SmoothCurveStringBuilder::AddFillets

(

)

Returns a flag to add transition fillets to sharp edges with a specified radius.

Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::SmoothCurveStringBuilder::AngularThreshold

(

)

Returns the angular threshold when trying to connect curves.

Created in NX9.0.0.

License requirements : None

NXOpen::GeometricUtilities::CurveFitData* NXOpen::Features::SmoothCurveStringBuilder::CurveFitData

(

)

Returns the curve fitting for curves if the user specifies merge curves.

Created in NX9.0.0.

License requirements : None

NXOpen::GeometricUtilities::CurveOptions* NXOpen::Features::SmoothCurveStringBuilder::CurveOptions

(

)

Returns the curve options.

Created in NX9.0.0.

License requirements : None

NXOpen::Section* NXOpen::Features::SmoothCurveStringBuilder::Curves

(

)

Returns the curves to be made continuous.

Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::SmoothCurveStringBuilder::DistanceThreshold

(

)

Returns the searching distance threshold when trying to connect curves.

Created in NX9.0.0.

License requirements : None

NXOpen::SelectCurveList* NXOpen::Features::SmoothCurveStringBuilder::FixedCurves

(

)

Returns the optional curves which are to remain fixed.

Created in NX9.0.0.

License requirements : None

NXOpen::Features::SmoothCurveStringBuilder::LevelTypes NXOpen::Features::SmoothCurveStringBuilder::LevelType

(

)

Returns the smoothing level of how continuous the output should be.

Created in NX9.0.0.

License requirements : None

NXOpen::Features::SmoothCurveStringBuilder::MergeTypes NXOpen::Features::SmoothCurveStringBuilder::MergeType

(

)

Returns the curve types if any to merge after they are made continuous.

Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::SmoothCurveStringBuilder::Radius

(

)

Returns the radius for transition fillets.

Created in NX9.0.0.

License requirements : None

void NXOpen::Features::SmoothCurveStringBuilder::SetAddFillets

(

bool

addFillets

)

Sets a flag to add transition fillets to sharp edges with a specified radius.

Created in NX9.0.0.

License requirements : studio_free_form ("STUDIO FREE FORM")

Parameters

addFillets

addfillets

void NXOpen::Features::SmoothCurveStringBuilder::SetLevelType

(

NXOpen::Features::SmoothCurveStringBuilder::LevelTypes

level

)

Sets the smoothing level of how continuous the output should be.

Created in NX9.0.0.

License requirements : studio_free_form ("STUDIO FREE FORM")

Parameters

level

level

void NXOpen::Features::SmoothCurveStringBuilder::SetMergeType

(

NXOpen::Features::SmoothCurveStringBuilder::MergeTypes

merge

)

Sets the curve types if any to merge after they are made continuous.

Created in NX9.0.0.

License requirements : studio_free_form ("STUDIO FREE FORM")

Parameters

merge

merge

void NXOpen::Features::SmoothCurveStringBuilder::SetType

(

NXOpen::Features::SmoothCurveStringBuilder::Types

type

)

Sets the type of input curves whether free or on surface.

Created in NX9.0.0.

License requirements : studio_free_form ("STUDIO FREE FORM")

Parameters

type

type

NXOpen::ScCollector* NXOpen::Features::SmoothCurveStringBuilder::SupportFaces

(

)

Returns the optional support faces.

Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::SmoothCurveStringBuilder::Tolerance

(

)

Returns the maximum lateral deviation between input and output.

Created in NX9.0.0.

License requirements : None

NXOpen::Features::SmoothCurveStringBuilder::Types NXOpen::Features::SmoothCurveStringBuilder::Type

(

)

Returns the type of input curves whether free or on surface.

Created in NX9.0.0.

License requirements : None

void NXOpen::Features::SmoothCurveStringBuilder::UpdateOnExpressionChange

(

)

Updates when any expression in the function changes
Created in NX9.0.0.

License requirements : studio_free_form ("STUDIO FREE FORM")

---

The documentation for this class was generated from the following file:

• Features_SmoothCurveStringBuilder.hxx