Represents a collection of Annotations::Dimension objects
This is an collection class. More...

Inheritance diagram for NXOpen::Annotations::DimensionCollection:

Classes
class	iterator
	Iterator for accessing the contents of the collection. More...

Public Member Functions
iterator	begin ()
	Returns an iterator addressing the first element.

NXOpen::Annotations::AngularDimensionBuilder *	CreateAngularDimensionBuilder (NXOpen::Annotations::BaseAngularDimension *angularDimension)
	Creates a Annotations::AngularDimensionBuilder.

NXOpen::Annotations::AppendedTextEditorBuilder *	CreateAppendedTextEditorBuilder (NXOpen::Annotations::Dimension *dimension)
	Creates a Annotations::AppendedTextEditorBuilder.

NXOpen::Annotations::ArcLengthDimension *	CreateArcLengthDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates an arc length dimension.

NXOpen::Annotations::ChamferDimension *	CreateChamferDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a chamfer dimension.

NXOpen::Annotations::ChamferDimensionBuilder *	CreateChamferDimensionBuilder (NXOpen::Annotations::BaseChamferDimension *chamferDimension)
	Creates a Annotations::ChamferDimensionBuilder.

NXOpen::Annotations::ConcentricCircleDimension *	CreateConcentricCircleDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a concentric circle dimension.

NXOpen::Annotations::CurveLengthDimensionBuilder *	CreateCurveLengthDimensionBuilder (NXOpen::Annotations::BaseArcLengthDimension *curveLengthDimension)
	Creates a Annotations::CurveLengthDimensionBuilder.

NXOpen::Annotations::CylindricalDimension *	CreateCylindricalDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a cylindrical dimension.

NXOpen::Annotations::DiameterDimension *	CreateDiameterDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a diameter dimension.

NXOpen::Annotations::FoldedRadiusDimension *	CreateFoldedRadiusDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a folded radius dimension.

NXOpen::Annotations::HoleDimension *	CreateHoleDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a hole dimension.

NXOpen::Annotations::HorizontalDimension *	CreateHorizontalDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a horizontal dimension.

void	CreateHorizontalOrdinateAutoDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin, bool allowDuplicate, bool repositionDim)
	Creates a horizontal ordinate automatic dimension Created in NX5.0.0.

NXOpen::Annotations::HorizontalOrdinateDimension *	CreateHorizontalOrdinateDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a horizontal ordinate dimension.

NXOpen::Annotations::LinearDimensionBuilder *	CreateLinearDimensionBuilder (NXOpen::Annotations::Dimension *linearDimension)
	Creates a Annotations::LinearDimensionBuilder.

NXOpen::Annotations::MajorAngularDimension *	CreateMajorAngularDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a major angular dimension.

NXOpen::Annotations::MajorAngularDimensionBuilder *	CreateMajorAngularDimensionBuilder (NXOpen::Annotations::MajorAngularDimension *angularDimension)
	Creates a Annotations::AngularDimensionBuilder.

NXOpen::Annotations::MinorAngularDimension *	CreateMinorAngularDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a minor angular dimension.

NXOpen::Annotations::MinorAngularDimensionBuilder *	CreateMinorAngularDimensionBuilder (NXOpen::Annotations::MinorAngularDimension *angularDimension)
	Creates a Annotations::AngularDimensionBuilder.

NXOpen::Annotations::OrdinateDimensionBuilder *	CreateOrdinateDimensionBuilder (NXOpen::Annotations::OrdinateDimension *ordinateDimension)
	Creates a Annotations::OrdinateDimensionBuilder.

NXOpen::Annotations::OrdinateOriginDimension *	CreateOrdinateOriginDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates an ordinate origin dimension.

NXOpen::Annotations::ParallelDimension *	CreateParallelDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a parallel dimension.

NXOpen::Annotations::PerpendicularDimension *	CreatePerpendicularDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a perpendicular dimension.

NXOpen::Annotations::PmiAngularDimensionBuilder *	CreatePmiAngularDimensionBuilder (NXOpen::Annotations::PmiAngularDimension *angularDimension)
	Creates a Annotations::PmiAngularDimensionBuilder.

NXOpen::Annotations::PmiArcLengthDimension *	CreatePmiArcLengthDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI arc length dimension.

NXOpen::Annotations::PmiChamferDimension *	CreatePmiChamferDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI chamfer dimnension.

NXOpen::Annotations::PmiChamferDimensionBuilder *	CreatePmiChamferDimensionBuilder (NXOpen::Annotations::PmiChamferDimension *chamferDimension)
	Creates a Annotations::PmiChamferDimensionBuilder.

NXOpen::Annotations::PmiConcentricCircleDimension *	CreatePmiConcentricCircleDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI concentric circle dimension.

NXOpen::Annotations::PmiCurveLengthDimensionBuilder *	CreatePmiCurveLengthDimensionBuilder (NXOpen::Annotations::PmiArcLengthDimension *curveLengthDimension)
	Creates a Annotations::PmiCurveLengthDimensionBuilder.

NXOpen::Annotations::PmiCylindricalDimension *	CreatePmiCylindricalDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI cylindrical dimension.

NXOpen::Annotations::PmiDiameterDimension *	CreatePmiDiameterDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI diameter dimension.

NXOpen::Annotations::PmiFoldedRadiusDimension *	CreatePmiFoldedRadiusDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI folded radius dimension.

NXOpen::Annotations::PmiHoleDimension *	CreatePmiHoleDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI hole dimension.

NXOpen::Annotations::PmiHorizontalDimension *	CreatePmiHorizontalDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI horizontal dimension.

void	CreatePmiHorizontalOrdinateAutoDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin, bool allowDuplicate, bool repositionDim)
	Creates a PMI horizontal ordinate automatic dimension Created in NX5.0.0.

NXOpen::Annotations::PmiHorizontalOrdinateDimension *	CreatePmiHorizontalOrdinateDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI horizontal ordinate dimension.

NXOpen::Annotations::PmiLinearDimensionBuilder *	CreatePmiLinearDimensionBuilder (NXOpen::Annotations::Dimension *linearDimension)
	Creates a Annotations::PmiLinearDimensionBuilder.

NXOpen::Annotations::PmiMajorAngularDimension *	CreatePmiMajorAngularDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI major angular dimension.

NXOpen::Annotations::PmiMajorAngularDimensionBuilder *	CreatePmiMajorAngularDimensionBuilder (NXOpen::Annotations::PmiMajorAngularDimension *angularDimension)
	Creates a Annotations::PmiMajorAngularDimensionBuilder.

NXOpen::Annotations::PmiMinorAngularDimension *	CreatePmiMinorAngularDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI minor angular dimension.

NXOpen::Annotations::PmiMinorAngularDimensionBuilder *	CreatePmiMinorAngularDimensionBuilder (NXOpen::Annotations::PmiMinorAngularDimension *angularDimension)
	Creates a Annotations::PmiMinorAngularDimensionBuilder.

NXOpen::Annotations::PmiOrdinateDimensionBuilder *	CreatePmiOrdinateDimensionBuilder (NXOpen::Annotations::OrdinateDimension *ordinateDimension)
	Creates a Annotations::PmiOrdinateDimensionBuilder.

NXOpen::Annotations::PmiOrdinateOriginDimension *	CreatePmiOrdinateOriginDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI ordinate origin dimension.

NXOpen::Annotations::PmiParallelDimension *	CreatePmiParallelDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI parallel dimension.

NXOpen::Annotations::PmiPerpendicularDimension *	CreatePmiPerpendicularDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI perpendicular dimension.

NXOpen::Annotations::PmiRadialDimensionBuilder *	CreatePmiRadialDimensionBuilder (NXOpen::Annotations::Dimension *radialDimension)
	Creates a Annotations::PmiRadialDimensionBuilder.

NXOpen::Annotations::PmiRadiusDimension *	CreatePmiRadiusDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::RadiusDimensionType radiusType, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI radius dimension.

NXOpen::Annotations::PmiRapidDimensionBuilder *	CreatePmiRapidDimensionBuilder (NXOpen::Annotations::Dimension *rapidDimension)
	Creates a Annotations::PmiRapidDimensionBuilder.

NXOpen::Annotations::PmiThicknessDimensionBuilder *	CreatePmiThicknessDimensionBuilder (NXOpen::Annotations::PmiConcentricCircleDimension *thicknessDimension)
	Creates a Annotations::PmiThicknessDimensionBuilder.

NXOpen::Annotations::PmiVerticalDimension *	CreatePmiVerticalDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI vertical dimension.

void	CreatePmiVerticalOrdinateAutoDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin, bool allowDuplicate, bool repositionDim)
	Creates a PMI vertical ordinate automatic dimension Created in NX5.0.0.

NXOpen::Annotations::PmiVerticalOrdinateDimension *	CreatePmiVerticalOrdinateDimension (NXOpen::Annotations::DimensionData dimensionData, NXOpen::Annotations::PmiData pmiData, NXOpen::Xform *annotationPlane, const NXOpen::Point3d &origin)
	Creates a PMI vertical ordinate dimension.

NXOpen::Annotations::RadialDimensionBuilder *	CreateRadialDimensionBuilder (NXOpen::Annotations::Dimension *radialDimension)
	Creates a Annotations::RadialDimensionBuilder.

NXOpen::Annotations::RadiusDimension *	CreateRadiusDimension (NXOpen::Annotations::DimensionData *dimensionData, NXOpen::Annotations::RadiusDimensionType radiusType, const NXOpen::Point3d &origin)
	Creates a radius dimension.

NXOpen::Annotations::RapidDimensionBuilder *	CreateRapidDimensionBuilder (NXOpen::Annotations::Dimension *rapidDimension)
	Creates a Annotations::RapidDimensionBuilder.

NXOpen::Annotations::ThicknessDimensionBuilder *	CreateThicknessDimensionBuilder (NXOpen::Annotations::BaseConcentricCircleDimension *thicknessDimension)
	Creates a Annotations::ThicknessDimensionBuilder.

NXOpen::Annotations::VerticalDimension *	CreateVerticalDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a vertical dimension.

void	CreateVerticalOrdinateAutoDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin, bool allowDuplicate, bool repositionDim)
	Creates a vertical ordinate automatic dimension Created in NX5.0.0.

NXOpen::Annotations::VerticalOrdinateDimension *	CreateVerticalOrdinateDimension (NXOpen::Annotations::DimensionData *dimensionData, const NXOpen::Point3d &origin)
	Creates a vertical ordinate dimension.

iterator	end ()
	Returns an iterator addressing one past the last element.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a collection of Annotations::Dimension objects
This is an collection class.

Created in NX3.0.0.

Member Function Documentation

iterator NXOpen::Annotations::DimensionCollection::begin ( )

Returns an iterator addressing the first element.

NXOpen::Annotations::AngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateAngularDimensionBuilder ( NXOpen::Annotations::BaseAngularDimension * angularDimension )

Creates a Annotations::AngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

angularDimension the Drafting or PMI inherited angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::AppendedTextEditorBuilder* NXOpen::Annotations::DimensionCollection::CreateAppendedTextEditorBuilder ( NXOpen::Annotations::Dimension * dimension )

Creates a Annotations::AppendedTextEditorBuilder.

Returns: Created in NX9.0.0.

License requirements : None

Parameters

dimension Annotations::Dimension to be edited

NXOpen::Annotations::ArcLengthDimension* NXOpen::Annotations::DimensionCollection::CreateArcLengthDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates an arc length dimension.

Returns: New arc length dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::ChamferDimension* NXOpen::Annotations::DimensionCollection::CreateChamferDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a chamfer dimension.

Returns: New chamfer dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::ChamferDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateChamferDimensionBuilder ( NXOpen::Annotations::BaseChamferDimension * chamferDimension )

Creates a Annotations::ChamferDimensionBuilder.

Returns: the chamfer dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

chamferDimension the Drafting or PMI Inherited PMI chamfer dimension to be edited, if NULL, then create an chamfer dimension

NXOpen::Annotations::ConcentricCircleDimension* NXOpen::Annotations::DimensionCollection::CreateConcentricCircleDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a concentric circle dimension.

Returns: New concentric circle dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::CurveLengthDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateCurveLengthDimensionBuilder ( NXOpen::Annotations::BaseArcLengthDimension * curveLengthDimension )

Creates a Annotations::CurveLengthDimensionBuilder.

Returns: the curve length dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

curveLengthDimension the Drafting or Inherited PMI curve length dimension to be edited, if NULL, then create an curve length dimension

NXOpen::Annotations::CylindricalDimension* NXOpen::Annotations::DimensionCollection::CreateCylindricalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a cylindrical dimension.

Returns: New cylindrical dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::DiameterDimension* NXOpen::Annotations::DimensionCollection::CreateDiameterDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a diameter dimension.

Returns: New diameter dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::FoldedRadiusDimension* NXOpen::Annotations::DimensionCollection::CreateFoldedRadiusDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a folded radius dimension.

Returns: New folded radius dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::HoleDimension* NXOpen::Annotations::DimensionCollection::CreateHoleDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a hole dimension.

Returns: New hole dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::HorizontalDimension* NXOpen::Annotations::DimensionCollection::CreateHorizontalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a horizontal dimension.

Returns: New horizontal dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

void NXOpen::Annotations::DimensionCollection::CreateHorizontalOrdinateAutoDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin,
		bool	allowDuplicate,
		bool	repositionDim
	)

Creates a horizontal ordinate automatic dimension
Created in NX5.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension
allowDuplicate	TRUE - Allow dimensions with duplicate values
repositionDim	TRUE - Reposition existing dimensions

NXOpen::Annotations::HorizontalOrdinateDimension* NXOpen::Annotations::DimensionCollection::CreateHorizontalOrdinateDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a horizontal ordinate dimension.

Returns: New horizontal ordinate dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::LinearDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateLinearDimensionBuilder ( NXOpen::Annotations::Dimension * linearDimension )

Creates a Annotations::LinearDimensionBuilder.

Returns: the linear dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

linearDimension the Drafting or PMI linear dimension to be edited, if NULL, then create an linear dimension

NXOpen::Annotations::MajorAngularDimension* NXOpen::Annotations::DimensionCollection::CreateMajorAngularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a major angular dimension.

Returns: New major angular dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::MajorAngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateMajorAngularDimensionBuilder ( NXOpen::Annotations::MajorAngularDimension * angularDimension )

Creates a Annotations::AngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

angularDimension the Drafting or PMI inherited angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::MinorAngularDimension* NXOpen::Annotations::DimensionCollection::CreateMinorAngularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a minor angular dimension.

Returns: New minor angular dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::MinorAngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateMinorAngularDimensionBuilder ( NXOpen::Annotations::MinorAngularDimension * angularDimension )

Creates a Annotations::AngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

angularDimension the Drafting or PMI inherited angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::OrdinateDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateOrdinateDimensionBuilder ( NXOpen::Annotations::OrdinateDimension * ordinateDimension )

Creates a Annotations::OrdinateDimensionBuilder.

Returns: the ordinate dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

ordinateDimension the Drafting or PMI inherited ordinate dimension to be edited, if NULL, then create an ordinate dimension

NXOpen::Annotations::OrdinateOriginDimension* NXOpen::Annotations::DimensionCollection::CreateOrdinateOriginDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates an ordinate origin dimension.

Returns: New ordinate origin dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::ParallelDimension* NXOpen::Annotations::DimensionCollection::CreateParallelDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a parallel dimension.

Returns: New parallel dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::PerpendicularDimension* NXOpen::Annotations::DimensionCollection::CreatePerpendicularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a perpendicular dimension.

Returns: New perpendicular dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

NXOpen::Annotations::PmiAngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiAngularDimensionBuilder ( NXOpen::Annotations::PmiAngularDimension * angularDimension )

Creates a Annotations::PmiAngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

angularDimension the PMI angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::PmiArcLengthDimension* NXOpen::Annotations::DimensionCollection::CreatePmiArcLengthDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI arc length dimension.

Returns: New PMI arc length dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiChamferDimension* NXOpen::Annotations::DimensionCollection::CreatePmiChamferDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI chamfer dimnension.

Returns: New PMI chamfer dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiChamferDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiChamferDimensionBuilder ( NXOpen::Annotations::PmiChamferDimension * chamferDimension )

Creates a Annotations::PmiChamferDimensionBuilder.

Returns: the chamfer dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

chamferDimension the PMI chamfer dimension to be edited, if NULL, then create an chamfer dimension

NXOpen::Annotations::PmiConcentricCircleDimension* NXOpen::Annotations::DimensionCollection::CreatePmiConcentricCircleDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI concentric circle dimension.

Returns: New PMI concentric circle dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiCurveLengthDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiCurveLengthDimensionBuilder ( NXOpen::Annotations::PmiArcLengthDimension * curveLengthDimension )

Creates a Annotations::PmiCurveLengthDimensionBuilder.

Returns: the curve length dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

curveLengthDimension the PMI curve length dimension to be edited, if NULL, then create an curve length dimension

NXOpen::Annotations::PmiCylindricalDimension* NXOpen::Annotations::DimensionCollection::CreatePmiCylindricalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI cylindrical dimension.

Returns: New PMI cylindrical dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiDiameterDimension* NXOpen::Annotations::DimensionCollection::CreatePmiDiameterDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI diameter dimension.

Returns: New PMI diameter dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiFoldedRadiusDimension* NXOpen::Annotations::DimensionCollection::CreatePmiFoldedRadiusDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI folded radius dimension.

Returns: New PMI folded radius dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiHoleDimension* NXOpen::Annotations::DimensionCollection::CreatePmiHoleDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI hole dimension.

Returns: New PMI hole dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiHorizontalDimension* NXOpen::Annotations::DimensionCollection::CreatePmiHorizontalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI horizontal dimension.

Returns: New PMI horizontal dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

void NXOpen::Annotations::DimensionCollection::CreatePmiHorizontalOrdinateAutoDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin,
		bool	allowDuplicate,
		bool	repositionDim
	)

Creates a PMI horizontal ordinate automatic dimension
Created in NX5.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension
allowDuplicate	TRUE - Allow dimensions with duplicate values
repositionDim	TRUE - Reposition existing dimensions

NXOpen::Annotations::PmiHorizontalOrdinateDimension* NXOpen::Annotations::DimensionCollection::CreatePmiHorizontalOrdinateDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI horizontal ordinate dimension.

Returns: New PMI horizontal ordinate dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiLinearDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiLinearDimensionBuilder ( NXOpen::Annotations::Dimension * linearDimension )

Creates a Annotations::PmiLinearDimensionBuilder.

Returns: the linear dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

linearDimension the PMI linear dimension to be edited, if NULL, then create an linear dimension

NXOpen::Annotations::PmiMajorAngularDimension* NXOpen::Annotations::DimensionCollection::CreatePmiMajorAngularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI major angular dimension.

Returns: New PMI major angular dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiMajorAngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiMajorAngularDimensionBuilder ( NXOpen::Annotations::PmiMajorAngularDimension * angularDimension )

Creates a Annotations::PmiMajorAngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

angularDimension the Drafting or PMI inherited angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::PmiMinorAngularDimension* NXOpen::Annotations::DimensionCollection::CreatePmiMinorAngularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI minor angular dimension.

Returns: New PMI minor angular dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiMinorAngularDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiMinorAngularDimensionBuilder ( NXOpen::Annotations::PmiMinorAngularDimension * angularDimension )

Creates a Annotations::PmiMinorAngularDimensionBuilder.

Returns: the Angular dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

angularDimension the Drafting or PMI inherited angular dimension to be edited, if NULL, then create an angular dimension

NXOpen::Annotations::PmiOrdinateDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiOrdinateDimensionBuilder ( NXOpen::Annotations::OrdinateDimension * ordinateDimension )

Creates a Annotations::PmiOrdinateDimensionBuilder.

Returns: the ordinate dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

ordinateDimension the PMI ordinate dimension to be edited, if NULL, then create an ordinate dimension

NXOpen::Annotations::PmiOrdinateOriginDimension* NXOpen::Annotations::DimensionCollection::CreatePmiOrdinateOriginDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI ordinate origin dimension.

Returns: New PMI ordinate origin dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiParallelDimension* NXOpen::Annotations::DimensionCollection::CreatePmiParallelDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI parallel dimension.

Returns: New PMI parallel dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiPerpendicularDimension* NXOpen::Annotations::DimensionCollection::CreatePmiPerpendicularDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI perpendicular dimension.

Returns: New PMI perpendicular dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiRadialDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiRadialDimensionBuilder ( NXOpen::Annotations::Dimension * radialDimension )

Creates a Annotations::PmiRadialDimensionBuilder.

Returns: the radial dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

radialDimension the PMI radial dimension to be edited, if NULL, then create an radial dimension

NXOpen::Annotations::PmiRadiusDimension* NXOpen::Annotations::DimensionCollection::CreatePmiRadiusDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::RadiusDimensionType	radiusType,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI radius dimension.

Returns: New PMI radius dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
radiusType	Radius type
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::PmiRapidDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiRapidDimensionBuilder ( NXOpen::Annotations::Dimension * rapidDimension )

Creates a Annotations::PmiRapidDimensionBuilder.

Returns: the Rapid dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

rapidDimension NULL. Create only.

NXOpen::Annotations::PmiThicknessDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreatePmiThicknessDimensionBuilder ( NXOpen::Annotations::PmiConcentricCircleDimension * thicknessDimension )

Creates a Annotations::PmiThicknessDimensionBuilder.

Returns: the thickness dimension builder
Created in NX9.0.0.

License requirements : geometric_tol ("GDT")

Parameters

thicknessDimension the PMI thickness dimension to be edited, if NULL, then create an thickness dimension

NXOpen::Annotations::PmiVerticalDimension* NXOpen::Annotations::DimensionCollection::CreatePmiVerticalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI vertical dimension.

Returns: New PMI vertical dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

void NXOpen::Annotations::DimensionCollection::CreatePmiVerticalOrdinateAutoDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin,
		bool	allowDuplicate,
		bool	repositionDim
	)

Creates a PMI vertical ordinate automatic dimension
Created in NX5.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension
allowDuplicate	TRUE - Allow dimensions with duplicate values
repositionDim	TRUE - Reposition existing dimensions

NXOpen::Annotations::PmiVerticalOrdinateDimension* NXOpen::Annotations::DimensionCollection::CreatePmiVerticalOrdinateDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::PmiData *	pmiData,
		NXOpen::Xform *	annotationPlane,
		const NXOpen::Point3d &	origin
	)

Creates a PMI vertical ordinate dimension.

Returns: New PMI vertical ordinate dimension
Created in NX4.0.0.

License requirements : geometric_tol ("GDT")

Parameters

dimensionData	Dimension data
pmiData	PMI data
annotationPlane	Annotation plane on which the dimension lies
origin	Origin for the dimension

NXOpen::Annotations::RadialDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateRadialDimensionBuilder ( NXOpen::Annotations::Dimension * radialDimension )

Creates a Annotations::RadialDimensionBuilder.

Returns: the radial dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

radialDimension the Drafting or PMI inherited radial dimension to be edited, if NULL, then create an radial dimension

NXOpen::Annotations::RadiusDimension* NXOpen::Annotations::DimensionCollection::CreateRadiusDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		NXOpen::Annotations::RadiusDimensionType	radiusType,
		const NXOpen::Point3d &	origin
	)

Creates a radius dimension.

Returns: New radius dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
radiusType	Radius type
origin	Origin for the dimension

NXOpen::Annotations::RapidDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateRapidDimensionBuilder ( NXOpen::Annotations::Dimension * rapidDimension )

Creates a Annotations::RapidDimensionBuilder.

Returns: the Rapid dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

rapidDimension NULL. Create only.

NXOpen::Annotations::ThicknessDimensionBuilder* NXOpen::Annotations::DimensionCollection::CreateThicknessDimensionBuilder ( NXOpen::Annotations::BaseConcentricCircleDimension * thicknessDimension )

Creates a Annotations::ThicknessDimensionBuilder.

Returns: the thickness dimension builder
Created in NX9.0.0.

License requirements : drafting ("DRAFTING")

Parameters

thicknessDimension the Drafting or Inherited PMI thickness dimension to be edited, if NULL, then create an thickness dimension

NXOpen::Annotations::VerticalDimension* NXOpen::Annotations::DimensionCollection::CreateVerticalDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a vertical dimension.

Returns: New vertical dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

void NXOpen::Annotations::DimensionCollection::CreateVerticalOrdinateAutoDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin,
		bool	allowDuplicate,
		bool	repositionDim
	)

Creates a vertical ordinate automatic dimension
Created in NX5.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension
allowDuplicate	TRUE - Allow dimensions with duplicate values
repositionDim	TRUE - Reposition existing dimensions

NXOpen::Annotations::VerticalOrdinateDimension* NXOpen::Annotations::DimensionCollection::CreateVerticalOrdinateDimension	(	NXOpen::Annotations::DimensionData *	dimensionData,
		const NXOpen::Point3d &	origin
	)

Creates a vertical ordinate dimension.

Returns: New vertical ordinate dimension
Created in NX4.0.0.

License requirements : drafting ("DRAFTING")

Parameters

dimensionData	Dimension data
origin	Origin for the dimension

iterator NXOpen::Annotations::DimensionCollection::end ( )

Returns an iterator addressing one past the last element.

tag_t NXOpen::Annotations::DimensionCollection::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

Annotations_DimensionCollection.hxx

Classes

Public Member Functions

Detailed Description

Member Function Documentation