    Represents a @link Features::ShipDesign::ShellExpansion Features::ShipDesign::ShellExpansion@endlink  builder
     <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShellExpansionBuilder  Features::ShipCollection::CreateShellExpansionBuilder @endlink  <br>

Default values. More...

Inheritance diagram for NXOpen::Features::ShipDesign::ShellExpansionBuilder:

Public Member Functions
int	AdditionalPlanesPerFrame ()
	Returns the additional planes per frame Created in NX7.5.0.

NXOpen::SelectDatumPlane *	AftLimitPlane ()
	Returns the aft limit plane Created in NX7.5.0.

bool	Associative ()
	Returns a flag that determines if output is associative (only used during creation).

NXOpen::SelectDatumPlane *	BasePlane ()
	Returns the base plane Created in NX7.5.0.

NXOpen::Section *	CurvesToMap ()
	Returns the curves to map Created in NX7.5.0.

NXOpen::ScCollector *	FacesToFlatten ()
	Returns the faces to flatten Created in NX7.5.0.

NXOpen::SelectDatumPlane *	ForeLimitPlane ()
	Returns the fore limit plane Created in NX7.5.0.

bool	MapFaceEdges ()
	Returns the map face edges Created in NX7.5.0.

bool	MapTransverseFrames ()
	Returns the map transverse frames Created in NX7.5.0.

void	SetAdditionalPlanesPerFrame (int additionalPlanesPerFrame)
	Sets the additional planes per frame Created in NX7.5.0.

void	SetAssociative (bool associative)
	Sets a flag that determines if output is associative (only used during creation).

void	SetMapFaceEdges (bool mapFaceEdges)
	Sets the map face edges Created in NX7.5.0.

void	SetMapTransverseFrames (bool mapTransverseFrames)
	Sets the map transverse frames Created in NX7.5.0.

void	SetTolerance (double tolerance)
	Sets the tolerance Created in NX7.5.0.

double	Tolerance ()
	Returns the tolerance Created in NX7.5.0.

NXOpen::SelectDatumPlane *	UpperLimitPlane ()
	Returns the upper limit plane Created in NX7.5.0.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

    Represents a @link Features::ShipDesign::ShellExpansion Features::ShipDesign::ShellExpansion@endlink  builder
     <br> To create a new instance of this class, use @link Features::ShipCollection::CreateShellExpansionBuilder  Features::ShipCollection::CreateShellExpansionBuilder @endlink  <br>

Default values.

Property

Value

AdditionalPlanesPerFrame

0

Associative

1

MapFaceEdges

1

MapTransverseFrames

1

Tolerance

1.0

Created in NX7.5.0.

Member Function Documentation

int NXOpen::Features::ShipDesign::ShellExpansionBuilder::AdditionalPlanesPerFrame ( )

Returns the additional planes per frame
Created in NX7.5.0.

License requirements : None

NXOpen::SelectDatumPlane* NXOpen::Features::ShipDesign::ShellExpansionBuilder::AftLimitPlane ( )

Returns the aft limit plane
Created in NX7.5.0.

License requirements : None

bool NXOpen::Features::ShipDesign::ShellExpansionBuilder::Associative ( )

Returns a flag that determines if output is associative (only used during creation).

Created in NX7.5.0.

License requirements : None

NXOpen::SelectDatumPlane* NXOpen::Features::ShipDesign::ShellExpansionBuilder::BasePlane ( )

Returns the base plane
Created in NX7.5.0.

License requirements : None

NXOpen::Section* NXOpen::Features::ShipDesign::ShellExpansionBuilder::CurvesToMap ( )

Returns the curves to map
Created in NX7.5.0.

License requirements : None

NXOpen::ScCollector* NXOpen::Features::ShipDesign::ShellExpansionBuilder::FacesToFlatten ( )

Returns the faces to flatten
Created in NX7.5.0.

License requirements : None

NXOpen::SelectDatumPlane* NXOpen::Features::ShipDesign::ShellExpansionBuilder::ForeLimitPlane ( )

Returns the fore limit plane
Created in NX7.5.0.

License requirements : None

bool NXOpen::Features::ShipDesign::ShellExpansionBuilder::MapFaceEdges ( )

Returns the map face edges
Created in NX7.5.0.

License requirements : None

bool NXOpen::Features::ShipDesign::ShellExpansionBuilder::MapTransverseFrames ( )

Returns the map transverse frames
Created in NX7.5.0.

License requirements : None

void NXOpen::Features::ShipDesign::ShellExpansionBuilder::SetAdditionalPlanesPerFrame ( int additionalPlanesPerFrame )

Sets the additional planes per frame
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")

Parameters

additionalPlanesPerFrame additionalplanesperframe

void NXOpen::Features::ShipDesign::ShellExpansionBuilder::SetAssociative ( bool associative )

Sets a flag that determines if output is associative (only used during creation).

Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")

Parameters

associative associative

void NXOpen::Features::ShipDesign::ShellExpansionBuilder::SetMapFaceEdges ( bool mapFaceEdges )

Sets the map face edges
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")

Parameters

mapFaceEdges mapfaceedges

void NXOpen::Features::ShipDesign::ShellExpansionBuilder::SetMapTransverseFrames ( bool mapTransverseFrames )

Sets the map transverse frames
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")

Parameters

mapTransverseFrames maptransverseframes

void NXOpen::Features::ShipDesign::ShellExpansionBuilder::SetTolerance ( double tolerance )

Sets the tolerance
Created in NX7.5.0.

License requirements : nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")

Parameters

tolerance tolerance

double NXOpen::Features::ShipDesign::ShellExpansionBuilder::Tolerance ( )

Returns the tolerance
Created in NX7.5.0.

License requirements : None

NXOpen::SelectDatumPlane* NXOpen::Features::ShipDesign::ShellExpansionBuilder::UpperLimitPlane ( )

Returns the upper limit plane
Created in NX7.5.0.

License requirements : None

The documentation for this class was generated from the following file:

Features_ShipDesign_ShellExpansionBuilder.hxx

Public Member Functions

Detailed Description

Member Function Documentation