Represents a Display::FacetSettingsBuilder
Facet Settings are not supported in KF. More...

Inheritance diagram for NXOpen::Display::FacetSettingsBuilder:

Public Types
enum	AdvVisToleranceSetting { AdvVisToleranceSettingCoarse, AdvVisToleranceSettingStandard, AdvVisToleranceSettingFine, AdvVisToleranceSettingExtraFine, AdvVisToleranceSettingSuperFine, AdvVisToleranceSettingUltraFine, AdvVisToleranceSettingUserDefined }
	Specifies which set of tolerances are to be used for rendering facets for display for Advanced Visualization views. More...

enum	FacetScale { FacetScaleFixed, FacetScalePart, FacetScaleView }
	Denotes what type of scaling factor is applied to the corresponding tolerances used to generate facets. More...

enum	FacetToViewRatio { FacetToViewRatioAutomatic, FacetToViewRatioUserDefined }
	Specifies whether the ratio of the view scale to the scale used to generate facets is determined automatically by the system (as was always done before NX 8) or whether a ratio defined by the user (by one of the set_*FacetRatio methods) is to be used as the ratio. More...

enum	FacetUpdate { FacetUpdateVisibleObjects, FacetUpdateAllObjects, FacetUpdateNone }
	Specifies whether an Update Display or Fit operation is to regenerate the facets for only visible objects, for all objects or for no objects. More...

enum	ShadedToleranceSetting { ShadedToleranceSettingCoarse, ShadedToleranceSettingStandard, ShadedToleranceSettingFine, ShadedToleranceSettingExtraFine, ShadedToleranceSettingUltraFine, ShadedToleranceSettingUserDefined }
	Specifies which set of tolerances are to be used for rendering facets for display for Shaded views. More...

Public Member Functions
bool	AdvVisAlignFacets ()
	Returns the state of whether facets for advanced visualization views should be aligned along common edges.

double	AdvVisFacetRatio ()
	Returns the facet ratio to use for Advanced Visualization Views

NXOpen::Display::FacetSettingsBuilder::FacetScale	AdvVisFacetScale ()
	Returns the facet scale to use for Advanced Visualization Views Created in NX9.0.0.

NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio	AdvVisFacetToViewRatio ()
	Returns the facet to view ratio to use for Advanced Visualization Views

double	AdvVisRefinementFactor ()
	Returns the refinement factor to use for Advanced Visualization Views Created in NX9.0.0.

NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting	AdvVisTolerance ()
	Returns the tolerance setting to use for Advanced Visualization Views Created in NX8.0.0.

NXOpen::Display::FacetSettingsBuilder::FacetUpdate	AdvVisUpdate ()
	Returns the update mode to use for Advanced Visualization Views Created in NX8.0.0.

double	GetAdvVisAngleTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance)
	Returns the angle tolerance for a given tolerance set for Advanced Visualization Views.

double	GetAdvVisEdgeTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance)
	Returns the edge tolerance for a given tolerance set for Advanced Visualization Views.

double	GetAdvVisFaceTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance)
	Returns the face tolerance for a given tolerance set for Advanced Visualization Views.

double	GetAdvVisWidthTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance)
	Returns the width tolerance for a given tolerance set for Advanced Visualization Views.

double	GetShadedAngleTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance)
	Returns the angle tolerance for a given tolerance set for Shaded Views.

double	GetShadedEdgeTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance)
	Returns the edge tolerance for a given tolerance set for Shaded Views.

double	GetShadedFaceTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance)
	Returns the face tolerance for a given tolerance set for Shaded Views.

void	SetAdvVisAlignFacets (bool advVisAlignFacets)
	Sets the state of whether facets for advanced visualization views should be aligned along common edges.

void	SetAdvVisAngleTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance, double advVisAngleTol)
	Sets the angle tolerance for a given tolerance set for Advanced Visualization Views Created in NX8.0.0.

void	SetAdvVisEdgeTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance, double advVisEdgeTol)
	Sets the edge tolerance for a given tolerance set for Advanced Visualization Views Created in NX8.0.0.

void	SetAdvVisFaceTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance, double advVisFaceTol)
	Sets the face tolerance for a given tolerance set for Advanced Visualization Views Created in NX8.0.0.

void	SetAdvVisFacetRatio (double advVisFacetRatio)
	Sets the facet ratio to use for Advanced Visualization Views

void	SetAdvVisFacetScale (NXOpen::Display::FacetSettingsBuilder::FacetScale advVisFacetScale)
	Sets the facet scale to use for Advanced Visualization Views Created in NX9.0.0.

void	SetAdvVisFacetToViewRatio (NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio advVisFacetToViewRatio)
	Sets the facet to view ratio to use for Advanced Visualization Views

void	SetAdvVisRefinementFactor (double advVisRefinementFactor)
	Sets the refinement factor to use for Advanced Visualization Views Created in NX9.0.0.

void	SetAdvVisTolerance (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance)
	Sets the tolerance setting to use for Advanced Visualization Views Created in NX8.0.0.

void	SetAdvVisUpdate (NXOpen::Display::FacetSettingsBuilder::FacetUpdate advVisUpdate)
	Sets the update mode to use for Advanced Visualization Views Created in NX8.0.0.

void	SetAdvVisWidthTol (NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance, double advVisWidthTol)
	Sets the width tolerance for a given tolerance set for Advanced Visualization Views Created in NX8.0.0.

void	SetShadedAlignFacets (bool shadedAlignFacets)
	Sets the state of whether facets for shaded views should be aligned along common edges.

void	SetShadedAngleTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance, double shadedAngleTol)
	Sets the angle tolerance for a given tolerance set for Shaded Views Created in NX8.0.0.

void	SetShadedEdgeTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance, double shadedEdgeTol)
	Sets the edge toleramce for a given tolerance set for Shaded Views Created in NX8.0.0.

void	SetShadedFaceTol (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance, double shadedFaceTol)
	Sets the face tolerance for a given tolerance set for Shaded Views Created in NX8.0.0.

void	SetShadedFacetRatio (double shadedFacetRatio)
	Sets the facet ratio to use for Shaded Views

void	SetShadedFacetScale (NXOpen::Display::FacetSettingsBuilder::FacetScale shadedFacetScale)
	Sets the facet scale to use for Shaded Views Created in NX9.0.0.

void	SetShadedFacetToViewRatio (NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio shadedFacetToViewRatio)
	Sets the facet to view ratio to use for Shaded Views

void	SetShadedRefinementFactor (double shadedRefinementFactor)
	Sets the refinement factor to use for Shaded Views Created in NX9.0.0.

void	SetShadedTolerance (NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance)
	Sets the tolerance setting to use for Shaded Views Created in NX8.0.0.

void	SetShadedUpdate (NXOpen::Display::FacetSettingsBuilder::FacetUpdate shadedUpdate)
	Sets the update mode to use for Shaded Views Created in NX8.0.0.

void	SetShowFacetEdges (bool showFacetEdges)
	Sets the state of whether facet edges should be shown for shaded solid and sheet bodies Created in NX8.5.0.

bool	ShadedAlignFacets ()
	Returns the state of whether facets for shaded views should be aligned along common edges.

double	ShadedFacetRatio ()
	Returns the facet ratio to use for Shaded Views

NXOpen::Display::FacetSettingsBuilder::FacetScale	ShadedFacetScale ()
	Returns the facet scale to use for Shaded Views Created in NX9.0.0.

NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio	ShadedFacetToViewRatio ()
	Returns the facet to view ratio to use for Shaded Views

double	ShadedRefinementFactor ()
	Returns the refinement factor to use for Shaded Views Created in NX9.0.0.

NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting	ShadedTolerance ()
	Returns the tolerance setting to use for Shaded Views Created in NX8.0.0.

NXOpen::Display::FacetSettingsBuilder::FacetUpdate	ShadedUpdate ()
	Returns the update mode to use for Shaded Views Created in NX8.0.0.

bool	ShowFacetEdges ()
	Returns the state of whether facet edges should be shown for shaded solid and sheet bodies Created in NX8.5.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a Display::FacetSettingsBuilder
Facet Settings are not supported in KF.

Created in NX8.0.0.

Member Enumeration Documentation

enum NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting

Specifies which set of tolerances are to be used for rendering facets for display for Advanced Visualization views.

Enumerator:

AdvVisToleranceSettingCoarse	coarse
AdvVisToleranceSettingStandard	standard
AdvVisToleranceSettingFine	fine
AdvVisToleranceSettingExtraFine	extra fine
AdvVisToleranceSettingSuperFine	super fine
AdvVisToleranceSettingUltraFine	ultra fine
AdvVisToleranceSettingUserDefined	user defined

enum NXOpen::Display::FacetSettingsBuilder::FacetScale

Denotes what type of scaling factor is applied to the corresponding tolerances used to generate facets.

Enumerator:

FacetScaleFixed	Adjusts tolerances by a constant value.
FacetScalePart	Adjusts tolerances by scale derived from bounding box of objects to facet in part.
FacetScaleView	Adjusts tolerances by view scale.

enum NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio

Specifies whether the ratio of the view scale to the scale used to generate facets is determined automatically by the system (as was always done before NX 8) or whether a ratio defined by the user (by one of the set_*FacetRatio methods) is to be used as the ratio.

Deprecated:: Deprecated in NX9.0.0. Refer to Display::FacetSettingsBuilder::FacetScale instead

Enumerator:

FacetToViewRatioAutomatic	automatic
FacetToViewRatioUserDefined	user defined

enum NXOpen::Display::FacetSettingsBuilder::FacetUpdate

Specifies whether an Update Display or Fit operation is to regenerate the facets for only visible objects, for all objects or for no objects.

Enumerator:

FacetUpdateVisibleObjects	visible objects
FacetUpdateAllObjects	all objects
FacetUpdateNone	none

enum NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting

Specifies which set of tolerances are to be used for rendering facets for display for Shaded views.

Enumerator:

ShadedToleranceSettingCoarse	coarse
ShadedToleranceSettingStandard	standard
ShadedToleranceSettingFine	fine
ShadedToleranceSettingExtraFine	extra fine
ShadedToleranceSettingUltraFine	ultra fine
ShadedToleranceSettingUserDefined	user defined

Member Function Documentation

bool NXOpen::Display::FacetSettingsBuilder::AdvVisAlignFacets ( )

Returns the state of whether facets for advanced visualization views should be aligned along common edges.

Using this option will generally increase the quality of the facets but the facet generation will generally take longer.
Created in NX8.5.0.

License requirements : None

double NXOpen::Display::FacetSettingsBuilder::AdvVisFacetRatio ( )

Returns the facet ratio to use for Advanced Visualization Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::AdvVisRefinementFactor instead

Created in NX8.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetScale NXOpen::Display::FacetSettingsBuilder::AdvVisFacetScale ( )

Returns the facet scale to use for Advanced Visualization Views
Created in NX9.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio NXOpen::Display::FacetSettingsBuilder::AdvVisFacetToViewRatio ( )

Returns the facet to view ratio to use for Advanced Visualization Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::AdvVisFacetScale instead

Created in NX8.0.0.

License requirements : None

double NXOpen::Display::FacetSettingsBuilder::AdvVisRefinementFactor ( )

Returns the refinement factor to use for Advanced Visualization Views
Created in NX9.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting NXOpen::Display::FacetSettingsBuilder::AdvVisTolerance ( )

Returns the tolerance setting to use for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetUpdate NXOpen::Display::FacetSettingsBuilder::AdvVisUpdate ( )

Returns the update mode to use for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

double NXOpen::Display::FacetSettingsBuilder::GetAdvVisAngleTol ( NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance )

Returns the angle tolerance for a given tolerance set for Advanced Visualization Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance advvistolerance

double NXOpen::Display::FacetSettingsBuilder::GetAdvVisEdgeTol ( NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance )

Returns the edge tolerance for a given tolerance set for Advanced Visualization Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance advvistolerance

double NXOpen::Display::FacetSettingsBuilder::GetAdvVisFaceTol ( NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance )

Returns the face tolerance for a given tolerance set for Advanced Visualization Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance advvistolerance

double NXOpen::Display::FacetSettingsBuilder::GetAdvVisWidthTol ( NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance )

Returns the width tolerance for a given tolerance set for Advanced Visualization Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance advvistolerance

double NXOpen::Display::FacetSettingsBuilder::GetShadedAngleTol ( NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance )

Returns the angle tolerance for a given tolerance set for Shaded Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance shadedtolerance

double NXOpen::Display::FacetSettingsBuilder::GetShadedEdgeTol ( NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance )

Returns the edge tolerance for a given tolerance set for Shaded Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance shadedtolerance

double NXOpen::Display::FacetSettingsBuilder::GetShadedFaceTol ( NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance )

Returns the face tolerance for a given tolerance set for Shaded Views.

Returns: Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance shadedtolerance

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisAlignFacets ( bool advVisAlignFacets )

Sets the state of whether facets for advanced visualization views should be aligned along common edges.

Using this option will generally increase the quality of the facets but the facet generation will generally take longer.
Created in NX8.5.0.

License requirements : None

Parameters

advVisAlignFacets advvisalignfacets

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisAngleTol	(	NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting	advVisTolerance,
		double	advVisAngleTol
	)

Sets the angle tolerance for a given tolerance set for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance	advvistolerance
advVisAngleTol	advvisangletol

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisEdgeTol	(	NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting	advVisTolerance,
		double	advVisEdgeTol
	)

Sets the edge tolerance for a given tolerance set for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance	advvistolerance
advVisEdgeTol	advvisedgetol

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisFaceTol	(	NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting	advVisTolerance,
		double	advVisFaceTol
	)

Sets the face tolerance for a given tolerance set for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance	advvistolerance
advVisFaceTol	advvisfacetol

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisFacetRatio ( double advVisFacetRatio )

Sets the facet ratio to use for Advanced Visualization Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::SetAdvVisRefinementFactor instead

Created in NX8.0.0.

License requirements : None

Parameters

advVisFacetRatio advvisfacetratio

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisFacetScale ( NXOpen::Display::FacetSettingsBuilder::FacetScale advVisFacetScale )

Sets the facet scale to use for Advanced Visualization Views
Created in NX9.0.0.

License requirements : None

Parameters

advVisFacetScale advvisfacetscale

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisFacetToViewRatio ( NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio advVisFacetToViewRatio )

Sets the facet to view ratio to use for Advanced Visualization Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::SetAdvVisFacetScale instead

Created in NX8.0.0.

License requirements : None

Parameters

advVisFacetToViewRatio advvisfacettoviewratio

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisRefinementFactor ( double advVisRefinementFactor )

Sets the refinement factor to use for Advanced Visualization Views
Created in NX9.0.0.

License requirements : None

Parameters

advVisRefinementFactor advvisrefinementfactor

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisTolerance ( NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting advVisTolerance )

Sets the tolerance setting to use for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance advvistolerance

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisUpdate ( NXOpen::Display::FacetSettingsBuilder::FacetUpdate advVisUpdate )

Sets the update mode to use for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisUpdate advvisupdate

void NXOpen::Display::FacetSettingsBuilder::SetAdvVisWidthTol	(	NXOpen::Display::FacetSettingsBuilder::AdvVisToleranceSetting	advVisTolerance,
		double	advVisWidthTol
	)

Sets the width tolerance for a given tolerance set for Advanced Visualization Views
Created in NX8.0.0.

License requirements : None

Parameters

advVisTolerance	advvistolerance
advVisWidthTol	advviswidthtol

void NXOpen::Display::FacetSettingsBuilder::SetShadedAlignFacets ( bool shadedAlignFacets )

Sets the state of whether facets for shaded views should be aligned along common edges.

Using this option will generally increase the quality of the facets but the facet generation will generally take longer.
Created in NX8.5.0.

License requirements : None

Parameters

shadedAlignFacets shadedalignfacets

void NXOpen::Display::FacetSettingsBuilder::SetShadedAngleTol	(	NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting	shadedTolerance,
		double	shadedAngleTol
	)

Sets the angle tolerance for a given tolerance set for Shaded Views
Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance	shadedtolerance
shadedAngleTol	shadedangletol

void NXOpen::Display::FacetSettingsBuilder::SetShadedEdgeTol	(	NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting	shadedTolerance,
		double	shadedEdgeTol
	)

Sets the edge toleramce for a given tolerance set for Shaded Views
Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance	shadedtolerance
shadedEdgeTol	shadededgetol

void NXOpen::Display::FacetSettingsBuilder::SetShadedFaceTol	(	NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting	shadedTolerance,
		double	shadedFaceTol
	)

Sets the face tolerance for a given tolerance set for Shaded Views
Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance	shadedtolerance
shadedFaceTol	shadedfacetol

void NXOpen::Display::FacetSettingsBuilder::SetShadedFacetRatio ( double shadedFacetRatio )

Sets the facet ratio to use for Shaded Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::SetShadedRefinementFactor instead

Created in NX8.0.0.

License requirements : None

Parameters

shadedFacetRatio shadedfacetratio

void NXOpen::Display::FacetSettingsBuilder::SetShadedFacetScale ( NXOpen::Display::FacetSettingsBuilder::FacetScale shadedFacetScale )

Sets the facet scale to use for Shaded Views
Created in NX9.0.0.

License requirements : None

Parameters

shadedFacetScale shadedfacetscale

void NXOpen::Display::FacetSettingsBuilder::SetShadedFacetToViewRatio ( NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio shadedFacetToViewRatio )

Sets the facet to view ratio to use for Shaded Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::SetShadedFacetScale instead

Created in NX8.0.0.

License requirements : None

Parameters

shadedFacetToViewRatio shadedfacettoviewratio

void NXOpen::Display::FacetSettingsBuilder::SetShadedRefinementFactor ( double shadedRefinementFactor )

Sets the refinement factor to use for Shaded Views
Created in NX9.0.0.

License requirements : None

Parameters

shadedRefinementFactor shadedrefinementfactor

void NXOpen::Display::FacetSettingsBuilder::SetShadedTolerance ( NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting shadedTolerance )

Sets the tolerance setting to use for Shaded Views
Created in NX8.0.0.

License requirements : None

Parameters

shadedTolerance shadedtolerance

void NXOpen::Display::FacetSettingsBuilder::SetShadedUpdate ( NXOpen::Display::FacetSettingsBuilder::FacetUpdate shadedUpdate )

Sets the update mode to use for Shaded Views
Created in NX8.0.0.

License requirements : None

Parameters

shadedUpdate shadedupdate

void NXOpen::Display::FacetSettingsBuilder::SetShowFacetEdges ( bool showFacetEdges )

Sets the state of whether facet edges should be shown for shaded solid and sheet bodies
Created in NX8.5.0.

License requirements : None

Parameters

showFacetEdges showfacetedges

bool NXOpen::Display::FacetSettingsBuilder::ShadedAlignFacets ( )

Returns the state of whether facets for shaded views should be aligned along common edges.

Using this option will generally increase the quality of the facets but the facet generation will generally take longer.
Created in NX8.5.0.

License requirements : None

double NXOpen::Display::FacetSettingsBuilder::ShadedFacetRatio ( )

Returns the facet ratio to use for Shaded Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::ShadedRefinementFactor instead

Created in NX8.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetScale NXOpen::Display::FacetSettingsBuilder::ShadedFacetScale ( )

Returns the facet scale to use for Shaded Views
Created in NX9.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetToViewRatio NXOpen::Display::FacetSettingsBuilder::ShadedFacetToViewRatio ( )

Returns the facet to view ratio to use for Shaded Views

Deprecated:: Deprecated in NX9.0.0.

Refer to Display::FacetSettingsBuilder::ShadedFacetScale instead

Created in NX8.0.0.

License requirements : None

double NXOpen::Display::FacetSettingsBuilder::ShadedRefinementFactor ( )

Returns the refinement factor to use for Shaded Views
Created in NX9.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::ShadedToleranceSetting NXOpen::Display::FacetSettingsBuilder::ShadedTolerance ( )

Returns the tolerance setting to use for Shaded Views
Created in NX8.0.0.

License requirements : None

NXOpen::Display::FacetSettingsBuilder::FacetUpdate NXOpen::Display::FacetSettingsBuilder::ShadedUpdate ( )

Returns the update mode to use for Shaded Views
Created in NX8.0.0.

License requirements : None

bool NXOpen::Display::FacetSettingsBuilder::ShowFacetEdges ( )

Returns the state of whether facet edges should be shown for shaded solid and sheet bodies
Created in NX8.5.0.

License requirements : None

The documentation for this class was generated from the following file:

Display_FacetSettingsBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation