Represents the CMM Inspection operation collection
To obtain an instance of this class, refer to CAM::InspectionSetup

Created in NX7.0.0. More...

Inheritance diagram for NXOpen::CAM::InspectionOperationCollection:

Classes
class	iterator
	Iterator for accessing the contents of the collection. More...

Public Member Functions
iterator	begin ()
	Returns an iterator addressing the first element.

NXOpen::CAM::InspectionOperation *	Create (NXOpen::CAM::InspectionGroup parentProgramGroup, NXOpen::CAM::InspectionGroup parentMethodGroup, NXOpen::CAM::InspectionGroup parentToolGroup, NXOpen::CAM::InspectionGroup parentGeometryGroup, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::OperationCollection::UseDefaultName useDefaultName, const NXString &newOperationName)
	Create an operation of the specified type and subtype under the parent groups.

NXOpen::CAM::InspectionOperation *	Create (NXOpen::CAM::InspectionGroup parentProgramGroup, NXOpen::CAM::InspectionGroup parentMethodGroup, NXOpen::CAM::InspectionGroup parentToolGroup, NXOpen::CAM::InspectionGroup parentGeometryGroup, const char typeName, const char subtypeName, NXOpen::CAM::OperationCollection::UseDefaultName useDefaultName, const char *newOperationName)
	Create an operation of the specified type and subtype under the parent groups.

NXOpen::CAM::InspectionAlignmentBuilder *	CreateInspectionAlignmentBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Alignment Builder.

NXOpen::CAM::InspectionAnalyzeBuilder *	CreateInspectionAnalyzeBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Analyze dialog builder.

NXOpen::CAM::InspectionAnalyzeOutputBuilder *	CreateInspectionAnalyzeOutputBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Analyze Output dialog builder.

NXOpen::CAM::InspectionArcFeatureBuilder *	CreateInspectionArcFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Arc Feature Builder.

NXOpen::CAM::InspectionCircleFeatureBuilder *	CreateInspectionCircleFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Circle Feature Builder.

NXOpen::CAM::InspectionCmmCommandBuilder *	CreateInspectionCmmCommandBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Cmm Command Builder.

NXOpen::CAM::InspectionCollisionAvoidanceBuilder *	CreateInspectionCollisionAvoidanceBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Collision Avoidance dialog builder.

NXOpen::CAM::InspectionConeFeatureBuilder *	CreateInspectionConeFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Cone Feature Builder.

NXOpen::CAM::InspectionConstructedFeatureBuilder *	CreateInspectionConstructedFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Constructed Feature Builder.

NXOpen::CAM::InspectionCparlnFeatureBuilder *	CreateInspectionCparlnFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Cparln Feature Builder.

NXOpen::CAM::InspectionCreatePathsBuilder *	CreateInspectionCreatePathsBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Create Paths dialog builder.

NXOpen::CAM::InspectionCurveFeatureBuilder *	CreateInspectionCurveFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Curve Feature Builder.

NXOpen::CAM::InspectionCylinderFeatureBuilder *	CreateInspectionCylinderFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Cylinder Feature Builder.

NXOpen::CAM::InspectionEdgePointFeatureBuilder *	CreateInspectionEdgePointFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Edge Point Feature dialog builder.

NXOpen::CAM::InspectionLineFeatureBuilder *	CreateInspectionLineFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Line Feature Builder.

NXOpen::CAM::InspectionLinkPmiBuilder *	CreateInspectionLinkPmiBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Link PMI dialog builder.

NXOpen::CAM::InspectionMeasDataBuilder *	CreateInspectionMeasDataBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Analyze Measured Data dialog builder.

NXOpen::CAM::InspectionOutputOperationBuilder *	CreateInspectionOutputOperationBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Output Operation Builder.

NXOpen::CAM::InspectionParplnFeatureBuilder *	CreateInspectionParplnFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Parpln Feature Builder.

NXOpen::CAM::InspectionPathBuilder *	CreateInspectionPathBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Path Operation builder.

NXOpen::CAM::InspectionPatternFeatureBuilder *	CreateInspectionPatternFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Pattern Feature Builder.

NXOpen::CAM::InspectionPlaneFeatureBuilder *	CreateInspectionPlaneFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Plane Feature Builder.

NXOpen::CAM::InspectionPointFeatureBuilder *	CreateInspectionPointFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Point Feature Builder.

NXOpen::CAM::InspectionSensorBuilder *	CreateInspectionSensorBuilder (NXOpen::CAM::CAMObject *param)
	Creates a CMM Inspection Sensor Operation builder.

NXOpen::CAM::InspectionSphereFeatureBuilder *	CreateInspectionSphereFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Sphere Feature Builder.

NXOpen::CAM::InspectionSurfaceFeatureBuilder *	CreateInspectionSurfaceFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Surface Feature Builder.

NXOpen::CAM::InspectionToleranceOperationBuilder *	CreateInspectionToleranceOperationBuilder (NXOpen::CAM::CAMObject *param)
	Creates a cmm tolerance operation builder.

NXOpen::CAM::InspectionTorusFeatureBuilder *	CreateInspectionTorusFeatureBuilder (NXOpen::CAM::CAMObject *param)
	Creates an Inspection Torus Feature Builder.

iterator	end ()
	Returns an iterator addressing one past the last element.

NXOpen::CAM::InspectionOperation *	FindObject (const NXString &sid)
	Finds the InspectionOperation object with the given identifier as recorded in a journal.

NXOpen::CAM::InspectionOperation *	FindObject (const char *sid)
	Finds the InspectionOperation object with the given identifier as recorded in a journal.

void	SetPathFeature (NXOpen::CAM::CAMObject *inspectionPath, const NXString &featureName)
	Sets the Inspection Feature referenced in an Inspection Path.

void	SetPathFeature (NXOpen::CAM::CAMObject inspectionPath, const char featureName)
	Sets the Inspection Feature referenced in an Inspection Path.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the CMM Inspection operation collection
To obtain an instance of this class, refer to CAM::InspectionSetup

Created in NX7.0.0.

Member Function Documentation

iterator NXOpen::CAM::InspectionOperationCollection::begin ( )

Returns an iterator addressing the first element.

NXOpen::CAM::InspectionOperation* NXOpen::CAM::InspectionOperationCollection::Create	(	NXOpen::CAM::InspectionGroup *	parentProgramGroup,
		NXOpen::CAM::InspectionGroup *	parentMethodGroup,
		NXOpen::CAM::InspectionGroup *	parentToolGroup,
		NXOpen::CAM::InspectionGroup *	parentGeometryGroup,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::OperationCollection::UseDefaultName	useDefaultName,
		const NXString &	newOperationName
	)

Create an operation of the specified type and subtype under the parent groups.

If the value of use_default_name is true, default name will be used for the created operation; otherwise, the specified name will be used.

Returns: the created operation
Created in NX4.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

parentProgramGroup	the parent program group
parentMethodGroup	the parent method group
parentToolGroup	the parent tool group
parentGeometryGroup	the parent geometry group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use default name or not
newOperationName	the name of the created operation, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::InspectionOperation* NXOpen::CAM::InspectionOperationCollection::Create	(	NXOpen::CAM::InspectionGroup *	parentProgramGroup,
		NXOpen::CAM::InspectionGroup *	parentMethodGroup,
		NXOpen::CAM::InspectionGroup *	parentToolGroup,
		NXOpen::CAM::InspectionGroup *	parentGeometryGroup,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::OperationCollection::UseDefaultName	useDefaultName,
		const char *	newOperationName
	)

Create an operation of the specified type and subtype under the parent groups.

If the value of use_default_name is true, default name will be used for the created operation; otherwise, the specified name will be used.

Returns: the created operation
Created in NX4.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

parentProgramGroup	the parent program group
parentMethodGroup	the parent method group
parentToolGroup	the parent tool group
parentGeometryGroup	the parent geometry group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use default name or not
newOperationName	the name of the created operation, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::InspectionAlignmentBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionAlignmentBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Alignment Builder.

Returns: Inspection alignment builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection alignment to be edited

NXOpen::CAM::InspectionAnalyzeBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionAnalyzeBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Analyze dialog builder.

Returns: Analyze Dialog builder created
Created in NX8.5.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionAnalyzeOutputBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionAnalyzeOutputBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Analyze Output dialog builder.

Returns: Analyze Output Dialog builder created
Created in NX8.5.1.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionArcFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionArcFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Arc Feature Builder.

Returns: Inspection Arc Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Arc Feature to be edited

NXOpen::CAM::InspectionCircleFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCircleFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Circle Feature Builder.

Returns: Inspection Circle Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Circle Feature to be edited

NXOpen::CAM::InspectionCmmCommandBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCmmCommandBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Cmm Command Builder.

Returns: Inspection Cmm command builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Cmm command to be edited

NXOpen::CAM::InspectionCollisionAvoidanceBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCollisionAvoidanceBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Collision Avoidance dialog builder.

Returns: Collision Avoidance Dialog builder created
Created in NX8.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionConeFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionConeFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Cone Feature Builder.

Returns: Inspection Cone Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Cone Feature to be edited

NXOpen::CAM::InspectionConstructedFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionConstructedFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Constructed Feature Builder.

Returns: Inspection Constructed Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Constructed Feature to be edited

NXOpen::CAM::InspectionCparlnFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCparlnFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Cparln Feature Builder.

Returns: Inspection Cparln Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Cparln Feature to be edited

NXOpen::CAM::InspectionCreatePathsBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCreatePathsBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Create Paths dialog builder.

Returns: Create Paths Dialog builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionCurveFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCurveFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Curve Feature Builder.

Returns: Inspection Curve Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Curve Feature to be edited

NXOpen::CAM::InspectionCylinderFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionCylinderFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Cylinder Feature Builder.

Returns: Inspection Cylinder Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Cylinder Feature to be edited

NXOpen::CAM::InspectionEdgePointFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionEdgePointFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Edge Point Feature dialog builder.

Returns: Edge Point Feature Dialog builder created
Created in NX9.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionLineFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionLineFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Line Feature Builder.

Returns: Inspection Line Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Line Feature to be edited

NXOpen::CAM::InspectionLinkPmiBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionLinkPmiBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Link PMI dialog builder.

Returns: Link PMI Dialog builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionMeasDataBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionMeasDataBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Analyze Measured Data dialog builder.

Returns: Analyze Measured Data Dialog builder created
Created in NX8.5.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Selected Node

NXOpen::CAM::InspectionOutputOperationBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionOutputOperationBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Output Operation Builder.

Returns: operation builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param operation to be edited

NXOpen::CAM::InspectionParplnFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionParplnFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Parpln Feature Builder.

Returns: Inspection Parpln Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Parpln Feature to be edited

NXOpen::CAM::InspectionPathBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionPathBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Path Operation builder.

Returns: Path operation builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Path operation to be edited

NXOpen::CAM::InspectionPatternFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionPatternFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Pattern Feature Builder.

Returns: Inspection Pattern Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Pattern Feature to be edited

NXOpen::CAM::InspectionPlaneFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionPlaneFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Plane Feature Builder.

Returns: Inspection Plane Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Plane Feature to be edited

NXOpen::CAM::InspectionPointFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionPointFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Point Feature Builder.

Returns: Inspection Point Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Point Feature to be edited

NXOpen::CAM::InspectionSensorBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionSensorBuilder ( NXOpen::CAM::CAMObject * param )

Creates a CMM Inspection Sensor Operation builder.

Returns: Sensor operation builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Sensor operation to be edited

NXOpen::CAM::InspectionSphereFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionSphereFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Sphere Feature Builder.

Returns: Inspection Sphere Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Sphere Feature to be edited

NXOpen::CAM::InspectionSurfaceFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionSurfaceFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Surface Feature Builder.

Returns: Inspection Surface Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Surface Feature to be edited

NXOpen::CAM::InspectionToleranceOperationBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionToleranceOperationBuilder ( NXOpen::CAM::CAMObject * param )

Creates a cmm tolerance operation builder.

Returns: operation builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param operation to be edited

NXOpen::CAM::InspectionTorusFeatureBuilder* NXOpen::CAM::InspectionOperationCollection::CreateInspectionTorusFeatureBuilder ( NXOpen::CAM::CAMObject * param )

Creates an Inspection Torus Feature Builder.

Returns: Inspection Torus Feature builder created
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

param Inspection Torus Feature to be edited

iterator NXOpen::CAM::InspectionOperationCollection::end ( )

Returns an iterator addressing one past the last element.

NXOpen::CAM::InspectionOperation* NXOpen::CAM::InspectionOperationCollection::FindObject ( const NXString & sid )

Finds the InspectionOperation object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

sid	the name of the object

NXOpen::CAM::InspectionOperation* NXOpen::CAM::InspectionOperationCollection::FindObject ( const char * sid )

Finds the InspectionOperation object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX7.0.0.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

sid	the name of the object

void NXOpen::CAM::InspectionOperationCollection::SetPathFeature	(	NXOpen::CAM::CAMObject *	inspectionPath,
		const NXString &	featureName
	)

Sets the Inspection Feature referenced in an Inspection Path.

Created in NX7.5.1.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

inspectionPath	Inspection Path
featureName	Feature name NOTE: The full Unicode character set is not supported for this parameter.

void NXOpen::CAM::InspectionOperationCollection::SetPathFeature	(	NXOpen::CAM::CAMObject *	inspectionPath,
		const char *	featureName
	)

Sets the Inspection Feature referenced in an Inspection Path.

Created in NX7.5.1.

License requirements : insp_programming ("INSPECTION PROGRAMMING")

Parameters

inspectionPath	Inspection Path
featureName	Feature name NOTE: The full Unicode character set is not supported for this parameter.

tag_t NXOpen::CAM::InspectionOperationCollection::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

CAM_InspectionOperationCollection.hxx

Classes

Public Member Functions

Detailed Description

Member Function Documentation