Represents the Simple Interference object. More...

Inheritance diagram for NXOpen::GeometricAnalysis::SimpleInterference:

Public Types
enum	FaceInterferenceMethod { FaceInterferenceMethodFirstPairOnly, FaceInterferenceMethodAllPairs }
	Specifies to "find only first pair of interfering faces" or "all pairs of interfering faces" between the input boides. More...

enum	InterferenceMethod { InterferenceMethodInterferingFaces, InterferenceMethodInterferenceSolid }
	Specifies interference method, i.e., to highlight interfering faces or create interference solid. More...

enum	Result { ResultNoInterference, ResultOnlyEdgesOrFacesInterfere, ResultInterferenceExists, ResultCanNotPerformCheck }
	Specifies the result of a simple interference check. More...

Public Member Functions
NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceMethod	FaceInterferenceType ()
	Returns the FaceInterferenceType.

NXOpen::SelectObject *	FirstBody ()
	Returns the First Body Created in NX5.0.0.

std::vector< NXOpen::NXObject * >	GetInterferenceResults ()
	Returns the pair(s) of interfering faces or solid(s) of interference between the input bodies.

bool	HighlightNextPair ()
	Highlights the pairs of interfering faces after a GeometricAnalysis::SimpleInterference::PerformCheck .

NXOpen::GeometricAnalysis::SimpleInterference::InterferenceMethod	InterferenceType ()
	Returns the InterferenceType.

NXOpen::GeometricAnalysis::SimpleInterference::Result	PerformCheck ()
	Perform Interference Check.

void	Reset ()
	Frees up resources/results associated with GeometricAnalysis::SimpleInterference object after a call to GeometricAnalysis::SimpleInterference::PerformCheck .

NXOpen::SelectObject *	SecondBody ()
	Returns the Second Body Created in NX5.0.0.

void	SetFaceInterferenceType (NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceMethod faceInterferenceType)
	Sets the FaceInterferenceType.

void	SetInterferenceType (NXOpen::GeometricAnalysis::SimpleInterference::InterferenceMethod interferenceType)
	Sets the InterferenceType.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the Simple Interference object.

A GeometricAnalysis::SimpleInterference object takes two solid bodies as inputs and the type of interference results to be produced. It can report the first pair of interfering faces between two solids or all pairs of interfering faces. It can also create the interference solid(s) between two bodies.
To create a new instance of this class, use GeometricAnalysis::AnalysisManager::CreateSimpleInterferenceObject

Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceMethod

Specifies to "find only first pair of interfering faces" or "all pairs of interfering faces" between the input boides.

Enumerator:

FaceInterferenceMethodFirstPairOnly	Find first pair of interfering faces.
FaceInterferenceMethodAllPairs	Find all pairs of interfering faces.

enum NXOpen::GeometricAnalysis::SimpleInterference::InterferenceMethod

Specifies interference method, i.e., to highlight interfering faces or create interference solid.

Enumerator:

InterferenceMethodInterferingFaces	Find interfering faces.
InterferenceMethodInterferenceSolid	Create interference solid.

enum NXOpen::GeometricAnalysis::SimpleInterference::Result

Specifies the result of a simple interference check.

Enumerator:

ResultNoInterference	No interference exists between the input bodies.
ResultOnlyEdgesOrFacesInterfere	Only faces or edges interfere and no solid interference exists between the input bodies.
ResultInterferenceExists	Interference exists between the input bodies. Use GeometricAnalysis::SimpleInterference::GetInterferenceResults to obtain the pairs of faces interfering or interference solid(s) created between the input bodies.
ResultCanNotPerformCheck	An unknown error has occured while performing the interference check. Check could not be performed between the input bodies.

Member Function Documentation

NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceMethod NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceType ( )

Returns the FaceInterferenceType.

         @link GeometricAnalysis::SimpleInterference::FaceInterferenceType GeometricAnalysis::SimpleInterference::FaceInterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetFaceInterferenceType GeometricAnalysis::SimpleInterference::SetFaceInterferenceType @endlink  is used when 
         @link GeometricAnalysis::SimpleInterference::InterferenceType GeometricAnalysis::SimpleInterference::InterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetInterferenceType GeometricAnalysis::SimpleInterference::SetInterferenceType @endlink  is set to
         @link GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces@endlink , 
         i.e., create pair(s) of interfering faces between two solids. A
         value of @link GeometricAnalysis::SimpleInterference::FaceInterferenceMethodFirstPairOnly GeometricAnalysis::SimpleInterference::FaceInterferenceMethodFirstPairOnly@endlink  
         for @link GeometricAnalysis::SimpleInterference::FaceInterferenceType GeometricAnalysis::SimpleInterference::FaceInterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetFaceInterferenceType GeometricAnalysis::SimpleInterference::SetFaceInterferenceType @endlink  reports only the first
         pair of interfering faces and value of
         @link GeometricAnalysis::SimpleInterference::FaceInterferenceMethodAllPairs GeometricAnalysis::SimpleInterference::FaceInterferenceMethodAllPairs@endlink  
         reports all pairs of interfering faces between two bodies.

Created in NX5.0.0.

License requirements : None

NXOpen::SelectObject* NXOpen::GeometricAnalysis::SimpleInterference::FirstBody ( )

Returns the First Body
Created in NX5.0.0.

License requirements : None

std::vector<NXOpen::NXObject *> NXOpen::GeometricAnalysis::SimpleInterference::GetInterferenceResults ( )

Returns the pair(s) of interfering faces or solid(s) of interference between the input bodies.

nObjects will be 0 if there is no face or solid interference between the input bodies. If the GeometricAnalysis::SimpleInterference::InterferenceType and GeometricAnalysis::SimpleInterference::SetInterferenceType is GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces , pair(s) of interfering faces are returned. The first two objects represent the first pair of interfering faces, and next two objects represent the second pair of interering faces and so on. If the GeometricAnalysis::SimpleInterference::FaceInterferenceType and GeometricAnalysis::SimpleInterference::SetFaceInterferenceType is GeometricAnalysis::SimpleInterference::FaceInterferenceMethodFirstPairOnly , only the first pair of interfering faces are returned.

Returns: Results of Simple Interference
Created in NX6.0.2.

License requirements : None

bool NXOpen::GeometricAnalysis::SimpleInterference::HighlightNextPair ( )

Highlights the pairs of interfering faces after a GeometricAnalysis::SimpleInterference::PerformCheck .

This method is applicable only when GeometricAnalysis::SimpleInterference::InterferenceType and GeometricAnalysis::SimpleInterference::SetInterferenceType is set to GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces and GeometricAnalysis::SimpleInterference::FaceInterferenceType and GeometricAnalysis::SimpleInterference::SetFaceInterferenceType is set to GeometricAnalysis::SimpleInterference::FaceInterferenceMethodAllPairs . When highlighting the next pair, current pair of faces is unhighlighted. Return value is set to true if there are more pairs of faces to be highlighted. If the last pair is reached (i.e., the pair being highlighted in this call is the last pair of faces), return value is set to false.

Returns: Indicates if there are any more pairs left .
Created in NX5.0.0.

License requirements : None

NXOpen::GeometricAnalysis::SimpleInterference::InterferenceMethod NXOpen::GeometricAnalysis::SimpleInterference::InterferenceType ( )

Returns the InterferenceType.

NXOpen::GeometricAnalysis::SimpleInterference::Result NXOpen::GeometricAnalysis::SimpleInterference::PerformCheck ( )

Perform Interference Check.

GeometricAnalysis::SimpleInterference::PerformCheck should be called after specifiying input bodies to be checked, i.e., GeometricAnalysis::SimpleInterference::FirstBody and GeometricAnalysis::SimpleInterference::SecondBody . The return value GeometricAnalysis::SimpleInterference::Result specifies the type of interference existing between the input bodies. Use GeometricAnalysis::SimpleInterference::GetInterferenceResults to obtain the interfering faces or solid(s) of interference between the input bodis.

Returns: Indicates the type of interference existing between the input bodies.
Created in NX5.0.0.

License requirements : None

void NXOpen::GeometricAnalysis::SimpleInterference::Reset ( )

Frees up resources/results associated with GeometricAnalysis::SimpleInterference object after a call to GeometricAnalysis::SimpleInterference::PerformCheck .

        @link GeometricAnalysis::SimpleInterference::PerformCheck GeometricAnalysis::SimpleInterference::PerformCheck@endlink  is followed by
        @link GeometricAnalysis::SimpleInterference::GetInterferenceResults GeometricAnalysis::SimpleInterference::GetInterferenceResults@endlink  and the
        @link GeometricAnalysis::SimpleInterference::Reset GeometricAnalysis::SimpleInterference::Reset@endlink .

Created in NX5.0.0.

License requirements : None

NXOpen::SelectObject* NXOpen::GeometricAnalysis::SimpleInterference::SecondBody ( )

Returns the Second Body
Created in NX5.0.0.

License requirements : None

void NXOpen::GeometricAnalysis::SimpleInterference::SetFaceInterferenceType ( NXOpen::GeometricAnalysis::SimpleInterference::FaceInterferenceMethod faceInterferenceType )

Sets the FaceInterferenceType.

         @link GeometricAnalysis::SimpleInterference::FaceInterferenceType GeometricAnalysis::SimpleInterference::FaceInterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetFaceInterferenceType GeometricAnalysis::SimpleInterference::SetFaceInterferenceType @endlink  is used when 
         @link GeometricAnalysis::SimpleInterference::InterferenceType GeometricAnalysis::SimpleInterference::InterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetInterferenceType GeometricAnalysis::SimpleInterference::SetInterferenceType @endlink  is set to
         @link GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces GeometricAnalysis::SimpleInterference::InterferenceMethodInterferingFaces@endlink , 
         i.e., create pair(s) of interfering faces between two solids. A
         value of @link GeometricAnalysis::SimpleInterference::FaceInterferenceMethodFirstPairOnly GeometricAnalysis::SimpleInterference::FaceInterferenceMethodFirstPairOnly@endlink  
         for @link GeometricAnalysis::SimpleInterference::FaceInterferenceType GeometricAnalysis::SimpleInterference::FaceInterferenceType @endlink and @link GeometricAnalysis::SimpleInterference::SetFaceInterferenceType GeometricAnalysis::SimpleInterference::SetFaceInterferenceType @endlink  reports only the first
         pair of interfering faces and value of
         @link GeometricAnalysis::SimpleInterference::FaceInterferenceMethodAllPairs GeometricAnalysis::SimpleInterference::FaceInterferenceMethodAllPairs@endlink  
         reports all pairs of interfering faces between two bodies.

Created in NX5.0.0.

License requirements : None

Parameters

faceInterferenceType faceinterferencetype

void NXOpen::GeometricAnalysis::SimpleInterference::SetInterferenceType ( NXOpen::GeometricAnalysis::SimpleInterference::InterferenceMethod interferenceType )

Sets the InterferenceType.

Parameters

interferenceType interferencetype

The documentation for this class was generated from the following file:

GeometricAnalysis_SimpleInterference.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation