JA interface for the UserDefinedClass object
To create a new instance of this class, use UserDefinedObjects::UserDefinedClassManager::NewUserDefinedClass

Created in NX5.0.0. More...

Inheritance diagram for NXOpen::UserDefinedObjects::UserDefinedClass:

Public Types
enum	AllowOwnedObjectSelection { AllowOwnedObjectSelectionOff = 1, AllowOwnedObjectSelectionOn }
	Allow owned object selection on all objects owned by an object of this UserDefinedClass . More...

enum	AllowQueryClass { AllowQueryClassOff = 1, AllowQueryClassOn }
	Allow query class from name options for a UserDefinedObject of this class. More...

typedef NXOpen::Callback1< int, NXOpen::UserDefinedObjects::UserDefinedDisplayEvent * >	DisplayCallback
	Prototype for display, selection, attention point, fit and screen-size-fit callbacks Created in NX5.0.0.

typedef NXOpen::Callback1< int, NXOpen::UserDefinedObjects::UserDefinedEvent * >	GenericCallback
	Prototype for information, edit, and suppress callbacks Created in NX5.0.0.

typedef NXOpen::Callback1< int, NXOpen::UserDefinedObjects::UserDefinedLinkEvent * >	LinkCallback
	Prototype for update, and delete callbacks Created in NX5.0.0.

enum	Selection { SelectionOff = 1, SelectionOn }
	Allow query class from name options for a UserDefinedObject . More...

Public Member Functions
void	AddAttentionPointHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback &displayEvent)
	Registers the attention point callback.

void	AddDeleteHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::LinkCallback &linkEvent)
	Registers the delete callback.

void	AddDisplayHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback &displayEvent)
	Registers UDO display callback.

void	AddEditHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback &udoEvent)
	Registers the edit callback.

void	AddFitHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback &displayEvent)
	Registers the fit callback.

void	AddInformationHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback &udoEvent)
	Registers the information callback.

void	AddScreenSizeFitHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback &displayEvent)
	Registers the screen size fit callback.

void	AddSelectionHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback &displayEvent)
	Registers the UDO selection callback.

void	AddSuppressHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback &udoEvent)
	Registers the suppress callback.

void	AddUpdateHandler (const NXOpen::UserDefinedObjects::UserDefinedClass::LinkCallback &linkEvent)
	Registers the update callback.

NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelection	AllowOwnedObjectSelectionOption ()
	Returns the allow owned object selection flag.

NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClass	AllowQueryClassFromName ()
	Returns the allow query class from name flag.

NXString	ClassName ()
	Returns the class name of the UserDefinedClass .

NXString	FriendlyName ()
	Returns the friendly name of the UserDefinedClass .

bool	GetIsOccurrenceableFlag ()
	Gets the is occurrenceable flag for this class.

void	SetAllowOwnedObjectSelectionOption (NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelection allowOwnedObjectSelectionOption)
	Sets the allow owned object selection flag.

void	SetAllowQueryClassFromName (NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClass allowQueryClassFromName)
	Sets the allow query class from name flag.

void	SetIsOccurrenceableFlag (bool isOccurrenceable)
	Sets the is occurrenceable flag for this class.

void	SetWarnUserFlag (bool warnUser)
	Sets the warn user flag.

bool	WarnUserFlag ()
	Returns the warn user flag.

virtual	~UserDefinedClass ()
	Frees the memory associated with this object.

Public Member Functions inherited from NXOpen::TransientObject
void *	GetHandle ()
	Handle of the internal object represented by this object.

Detailed Description

JA interface for the UserDefinedClass object
To create a new instance of this class, use UserDefinedObjects::UserDefinedClassManager::NewUserDefinedClass

Created in NX5.0.0.

Member Typedef Documentation

typedef NXOpen::Callback1<int, NXOpen::UserDefinedObjects::UserDefinedDisplayEvent *> NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback

       Prototype for display, selection, attention point, fit and screen-size-fit callbacks

Created in NX5.0.0.

License requirements : None

typedef NXOpen::Callback1<int, NXOpen::UserDefinedObjects::UserDefinedEvent *> NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback

       Prototype for information, edit, and suppress callbacks

Created in NX5.0.0.

License requirements : None

typedef NXOpen::Callback1<int, NXOpen::UserDefinedObjects::UserDefinedLinkEvent *> NXOpen::UserDefinedObjects::UserDefinedClass::LinkCallback

       Prototype for update, and delete callbacks

Created in NX5.0.0.

License requirements : None

Member Enumeration Documentation

enum NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelection

Allow owned object selection on all objects owned by an object of this UserDefinedClass .

Enumerator:

AllowOwnedObjectSelectionOn

You have permission to select objects owned by this class.

enum NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClass

Allow query class from name options for a UserDefinedObject of this class.

Enumerator:

AllowQueryClassOn

You have permission to query the class from it's name.

enum NXOpen::UserDefinedObjects::UserDefinedClass::Selection

Allow query class from name options for a UserDefinedObject .

Enumerator:

SelectionOn

UDO's of this class will be selectable.

Constructor & Destructor Documentation

virtual NXOpen::UserDefinedObjects::UserDefinedClass::~UserDefinedClass ( )

virtual

Frees the memory associated with this object.

After invocation of this method, the object is no longer valid.
Created in NX5.0.0.

License requirements : None

Member Function Documentation

void NXOpen::UserDefinedObjects::UserDefinedClass::AddAttentionPointHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback & displayEvent )

Registers the attention point callback.

Created in NX5.0.0.

License requirements : None

Parameters

displayEvent display event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddDeleteHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::LinkCallback & linkEvent )

Registers the delete callback.

Created in NX5.0.0.

License requirements : None

Parameters

linkEvent link event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddDisplayHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback & displayEvent )

Registers UDO display callback.

Created in NX5.0.0.

License requirements : None

Parameters

displayEvent display event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddEditHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback & udoEvent )

Registers the edit callback.

Created in NX5.0.0.

License requirements : None

Parameters

udoEvent udo event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddFitHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback & displayEvent )

Registers the fit callback.

Created in NX5.0.0.

License requirements : None

Parameters

displayEvent display event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddInformationHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback & udoEvent )

Registers the information callback.

Created in NX5.0.0.

License requirements : None

Parameters

udoEvent udo event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddScreenSizeFitHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback & displayEvent )

Registers the screen size fit callback.

The screen size fit callback is called when it is necesary to determine the bounding box of a screen size object (one which remains the same size on the screen independent of the view scale) during a fit computation. As of NX 8.0 the only geometry types supported for User Defined Objects which are screen size are ScreenStandardText and AbsoluteRotationScreenSizeText. If your User Defined Object does not have any of these objects, then you should not call UserDefinedObjects::UserDefinedClass::AddScreenSizeFitHandler because to do do would incur a performance penalty.
Created in NX8.0.0.

License requirements : None

Parameters

displayEvent display event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddSelectionHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::DisplayCallback & displayEvent )

Registers the UDO selection callback.

Created in NX5.0.0.

License requirements : None

Parameters

displayEvent display event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddSuppressHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::GenericCallback & udoEvent )

Registers the suppress callback.

   Note this callback is not called unless you have a UDO FEATURE.  Also it *may* not
   get called when the system automatically suppresses the feature during update.

   Also note the user should check the suppression status of the feature in their callback to
   see if the input udo feature is currently getting suppressed or unsuppressed.

Created in NX5.0.0.

License requirements : None

Parameters

udoEvent udo event

void NXOpen::UserDefinedObjects::UserDefinedClass::AddUpdateHandler ( const NXOpen::UserDefinedObjects::UserDefinedClass::LinkCallback & linkEvent )

Registers the update callback.

Created in NX5.0.0.

License requirements : None

Parameters

linkEvent link event

NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelection NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelectionOption ( )

Returns the allow owned object selection flag.

Specifies whether or not you have permission to select objects owned by UserDefinedObjects::UserDefinedObject 's of this class.
Created in NX5.0.0.

License requirements : None

NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClass NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClassFromName ( )

Returns the allow query class from name flag.

Specifies whether or not you are allowed to query the UserDefinedObject from the class name.
Created in NX5.0.0.

License requirements : None

NXString NXOpen::UserDefinedObjects::UserDefinedClass::ClassName ( )

Returns the class name of the UserDefinedClass .

Created in NX5.0.0.

License requirements : None

NXString NXOpen::UserDefinedObjects::UserDefinedClass::FriendlyName ( )

Returns the friendly name of the UserDefinedClass .

Created in NX5.0.0.

License requirements : None

bool NXOpen::UserDefinedObjects::UserDefinedClass::GetIsOccurrenceableFlag ( )

Gets the is occurrenceable flag for this class.

   Legacy Open C UDO's required a reference UDO to determine Occurrenceability.  Occurrenceability is now set
   on a class by class basis (no reference UDO required).  In the event that you have a legacy UDO you wish to query for occurenceability, 
   you will need set the is occurrenceable flag with the new native language method (which does not require a reference UDO) 
   If you do not set the is occurrenceable flag, and instead use the old open c is occurrenceable callback, you will risk error raising during this
   method because we will automatically pass NULL in as the reference UDO to the legacy is occurrenceable callback. @return  Specifies whether or not to populate occurrences for @link UserDefinedObjects::UserDefinedObject UserDefinedObjects::UserDefinedObject@endlink 's of this class.

Created in NX5.0.0.

License requirements : None

void NXOpen::UserDefinedObjects::UserDefinedClass::SetAllowOwnedObjectSelectionOption ( NXOpen::UserDefinedObjects::UserDefinedClass::AllowOwnedObjectSelection allowOwnedObjectSelectionOption )

Sets the allow owned object selection flag.

Specifies whether or not you have permission to select objects owned by UserDefinedObjects::UserDefinedObject 's of this class.
Created in NX5.0.0.

License requirements : None

Parameters

allowOwnedObjectSelectionOption allow owned object selection option

void NXOpen::UserDefinedObjects::UserDefinedClass::SetAllowQueryClassFromName ( NXOpen::UserDefinedObjects::UserDefinedClass::AllowQueryClass allowQueryClassFromName )

Sets the allow query class from name flag.

Specifies whether or not you are allowed to query the UserDefinedObject from the class name.
Created in NX5.0.0.

License requirements : None

Parameters

allowQueryClassFromName allow query class from name

void NXOpen::UserDefinedObjects::UserDefinedClass::SetIsOccurrenceableFlag ( bool isOccurrenceable )

Sets the is occurrenceable flag for this class.

Created in NX5.0.0.

License requirements : None

Parameters

isOccurrenceable Specifies whether or not to populate occurrences for UserDefinedObjects::UserDefinedObject 's of this class.

void NXOpen::UserDefinedObjects::UserDefinedClass::SetWarnUserFlag ( bool warnUser )

Sets the warn user flag.

   Specifies the behavior of warning the user if a @link UserDefinedObjects::
    UserDefinedObject UserDefinedObjects::
    UserDefinedObject@endlink  of the given @link UserDefinedObjects::UserDefinedClass UserDefinedObjects::UserDefinedClass@endlink  
    is found in a part, but the code implementing the methods for the UDO is not loaded.
   The default action is to not warn the user. If the UDO author sets this flag
   to TRUE, all UDO's of this class that are created will be marked so that the
   user will be warned if the UDO methods have not been loaded, but a UDO of the
   class is in the part. This warning will be issued to the listing window,
   when the first object of the given class is retrieved. This warning will
   only be given once per session.

   This flag is set on every UDO object. Therefore for any part, there may be a mixture UDO objects of a given class, 
    some having this flag set to TRUE and some objects having the flag set to FALSE. This is particularly true since all 
    UDO objects created before NX 3.0 will have this flag set to FALSE. If the UDO methods for a class are not loaded, 
    any one UDO with this flag set to TRUE in a part is enough for the warning to be issued to the listing window.

Created in NX5.0.0.

License requirements : None

Parameters

warnUser TRUE - the user will be warned when opening a part containing a UDO of this class without first loading it's required methods. FALSE - the user will NOT be warned.

bool NXOpen::UserDefinedObjects::UserDefinedClass::WarnUserFlag ( )

Returns the warn user flag.

   Specifies the behavior of warning the user if a @link UserDefinedObjects::
    UserDefinedObject UserDefinedObjects::
    UserDefinedObject@endlink  of the given @link UserDefinedObjects::UserDefinedClass UserDefinedObjects::UserDefinedClass@endlink  
    is found in a part, but the code implementing the methods for the UDO is not loaded.
   The default action is to not warn the user. If the UDO author sets this flag
   to TRUE, all UDO's of this class that are created will be marked so that the
   user will be warned if the UDO methods have not been loaded, but a UDO of the
   class is in the part. This warning will be issued to the listing window,
   when the first object of the given class is retrieved. This warning will
   only be given once per session.

   This flag is set on every UDO object. Therefore for any part, there may be a mixture UDO objects of a given class, 
    some having this flag set to TRUE and some objects having the flag set to FALSE. This is particularly true since all 
    UDO objects created before NX 3.0 will have this flag set to FALSE. If the UDO methods for a class are not loaded, 
    any one UDO with this flag set to TRUE in a part is enough for the warning to be issued to the listing window.

Created in NX5.0.0.

License requirements : None

The documentation for this class was generated from the following file:

UserDefinedObjects_UserDefinedClass.hxx

Public Types

Public Member Functions

Detailed Description

Member Typedef Documentation

Member Enumeration Documentation

Constructor & Destructor Documentation

Member Function Documentation