NXOpen::CAE::Optimization::TBSSmoothBuilder Class Reference

Represents the builder of CAE::Optimization::TBSSmooth . More...

Inheritance diagram for NXOpen::CAE::Optimization::TBSSmoothBuilder:

Public Types
enum	Format { FormatBdf, FormatStl, FormatIges }
	Defines the output file format of surface representation. More...
enum	IsoType { IsoTypeOriginal, IsoTypeNew, IsoTypeBoth }
	Specifies the content saved to the output files. More...
enum	OriginalSurfaceSmoothingOption { OriginalSurfaceSmoothingOptionOff, OriginalSurfaceSmoothingOptionShrink, OriginalSurfaceSmoothingOptionFull }
	Defines if the original surface is to be smoothed or remain unchanged. More...
enum	ResultFiltering { ResultFilteringOff, ResultFilteringModerate, ResultFilteringFull }
	Defines if the element material values are to be filtered before the isocut. More...
enum	SelfIntersectionCheckingOption { SelfIntersectionCheckingOptionOff, SelfIntersectionCheckingOptionCheck, SelfIntersectionCheckingOptionRuntime, SelfIntersectionCheckingOptionIterative }
	Defines if the self-itersection checks are to be performed during the isocut, smoothing and data reduction. More...
enum	SliceFormatOption { SliceFormatOptionIgsPolygon, SliceFormatOptionIgsCurves, SliceFormatOptionCli, SliceFormatOptionAll }
	Defines how to save slices. More...

Public Member Functions
bool	Border ()
	Returns the option to save border.
NXOpen::Expression *	ComponentLimitingSize ()
	Returns the limiting size that defines the minimal allowed relative size of a connected component.
std::vector < NXOpen::CAE::Optimization::TBSSmoothBuilder::Format >	GetFormatOption ()
	The output result format accessor.
NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoType	IsoTypeOption ()
	Returns the option that specifies what should be saved to the output files Created in NX8.0.0.
double	IsoValue ()
	Returns the iso value that is used to determine the positions on the element edges where the new nodes are created.
NXOpen::Expression *	MinimumAngle ()
	Returns the minimum angle that defines the minimal angle of the triangles that result from the smoothing and data reduction.
bool	MixedMesh ()
	Returns the choice whether to form quardrilaterals from adjacent triangles Created in NX8.0.0.
NXOpen::CAE::Optimization::NameDescription *	NameDescription ()
	Returns the name description Created in NX8.0.0.
NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmoothingOption	OriginalSurfaceSmooth ()
	Returns the option of how to smooth the original surface Created in NX8.0.0.
NXOpen::Expression *	ReductionAngle ()
	Returns the reduction angle that defines the maximal angle between adjacent faces at a node such that the node may be removed during the data reduction Created in NX8.0.0.
double	ReductionRate ()
	Returns the reduction rate that defines the percent of faces that should be removed during the data reduction.
NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFiltering	ResultFilteringOption ()
	Returns the result filtering option Created in NX8.0.0.
NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionCheckingOption	SelfIntersectionChecking ()
	Returns the option of self-intersection checking Created in NX8.0.0.
void	SetBorder (bool border)
	Sets the option to save border.
void	SetFormatOption (const std::vector< NXOpen::CAE::Optimization::TBSSmoothBuilder::Format > &formatOption)
	The output result format mutator Created in NX8.0.0.
void	SetIsoTypeOption (NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoType isoTypeOption)
	Sets the option that specifies what should be saved to the output files Created in NX8.0.0.
void	SetIsoValue (double isoValue)
	Sets the iso value that is used to determine the positions on the element edges where the new nodes are created.
void	SetMixedMesh (bool mixedMesh)
	Sets the choice whether to form quardrilaterals from adjacent triangles Created in NX8.0.0.
void	SetOriginalSurfaceSmooth (NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmoothingOption originalSurfaceSmooth)
	Sets the option of how to smooth the original surface Created in NX8.0.0.
void	SetReductionRate (double reductionRate)
	Sets the reduction rate that defines the percent of faces that should be removed during the data reduction.
void	SetResultFilteringOption (NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFiltering resultFilteringOption)
	Sets the result filtering option Created in NX8.0.0.
void	SetSelfIntersectionChecking (NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionCheckingOption selfIntersectionChecking)
	Sets the option of self-intersection checking Created in NX8.0.0.
void	SetSliceFormat (NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormatOption sliceFormat)
	Sets the slice format Created in NX8.0.0.
void	SetSliceNormalVector (NXOpen::Direction *sliceNormalVector)
	Sets the slice normal vector Created in NX8.0.0.
void	SetSliceNumber (int sliceNumber)
	Sets the slice number Created in NX8.0.0.
void	SetSmoothCycles (int smoothCycles)
	Sets the number of smoothing cycles.
void	SetTargetVolume (double targetVolume)
	Sets the target volume that is to be achieved iteratively by varying the isovalue.
void	SetUseAdditionalParameters (bool useAdditionalParameters)
	Sets the option to use additional parameter.
NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormatOption	SliceFormat ()
	Returns the slice format Created in NX8.0.0.
NXOpen::Direction *	SliceNormalVector ()
	Returns the slice normal vector Created in NX8.0.0.
int	SliceNumber ()
	Returns the slice number Created in NX8.0.0.
NXOpen::CAE::Optimization::TBSGroupDefinition *	SmoothArea ()
	Returns the area to be smoothed Created in NX8.0.0.
int	SmoothCycles ()
	Returns the number of smoothing cycles.
double	TargetVolume ()
	Returns the target volume that is to be achieved iteratively by varying the isovalue.
bool	UseAdditionalParameters ()
	Returns the option to use additional parameter.
Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.
void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.
std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.
NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.
void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.
Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br>    Use Tag instead.
tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the builder of CAE::Optimization::TBSSmooth .

To create a new instance of this class, use CAE::Optimization::TBSOptimizationManager::CreateSmoothBuilder

Created in NX8.0.0.

Member Enumeration Documentation

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::Format

Defines the output file format of surface representation.

Enumerator:

FormatBdf	Represents surfaces in .bdf file.
FormatStl	Represents surfaces in .stl file.
FormatIges	Represents surfaces in .igs file.

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoType

Specifies the content saved to the output files.

Enumerator:

IsoTypeOriginal	Saves the original surface.
IsoTypeNew	Saves the surface gererated by Isocut.
IsoTypeBoth	Saves the complete surface.

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmoothingOption

Defines if the original surface is to be smoothed or remain unchanged.

Enumerator:

OriginalSurfaceSmoothingOptionOff	No changes to the original surface.
OriginalSurfaceSmoothingOptionShrink	Allows the nodes on original surface to be moved towards the inside only.
OriginalSurfaceSmoothingOptionFull	Allows any modifications to the original surface.

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFiltering

Defines if the element material values are to be filtered before the isocut.

Enumerator:

ResultFilteringOff	Don't filter the element material values.
ResultFilteringModerate	Filters the element material values partially.
ResultFilteringFull	Filters the element material values fully.

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionCheckingOption

Defines if the self-itersection checks are to be performed during the isocut, smoothing and data reduction.

Enumerator:

SelfIntersectionCheckingOptionOff	No checks.
SelfIntersectionCheckingOptionCheck	Check once.
SelfIntersectionCheckingOptionRuntime	Check always.
SelfIntersectionCheckingOptionIterative	First run without check, then rerun if self-intersections are found.

enum NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormatOption

Defines how to save slices.

Enumerator:

SliceFormatOptionIgsPolygon	Saves slices as polygons using cubic parametric splines for each segment.
SliceFormatOptionIgsCurves	Saves slices as curves obtained by interpolation using uniform cubic splines.
SliceFormatOptionCli	Saves slices as polygons saved in common layer interface format.
SliceFormatOptionAll	Save slices in all formats mentioned above.

Member Function Documentation

bool NXOpen::CAE::Optimization::TBSSmoothBuilder::Border

(

)

Returns the option to save border.

If yes, the border of the shell element model will saved
Created in NX8.0.0.

License requirements : None

NXOpen::Expression* NXOpen::CAE::Optimization::TBSSmoothBuilder::ComponentLimitingSize

(

)

Returns the limiting size that defines the minimal allowed relative size of a connected component.

   All components with the relative size below this value are removed 

Created in NX8.0.0.

License requirements : None

std::vector<NXOpen::CAE::Optimization::TBSSmoothBuilder::Format> NXOpen::CAE::Optimization::TBSSmoothBuilder::GetFormatOption

(

)

The output result format accessor.

Returns

Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoType NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoTypeOption

(

)

Returns the option that specifies what should be saved to the output files
Created in NX8.0.0.

License requirements : None

double NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoValue

(

)

Returns the iso value that is used to determine the positions on the element edges where the new nodes are created.

   Larger value lead to models with smaller volume. Value is between 0 and 1 

Created in NX8.0.0.

License requirements : None

NXOpen::Expression* NXOpen::CAE::Optimization::TBSSmoothBuilder::MinimumAngle

(

)

Returns the minimum angle that defines the minimal angle of the triangles that result from the smoothing and data reduction.

Too large value may prevent the smoothing, and too small value may lead to degenerated triangles
Created in NX8.0.0.

License requirements : None

bool NXOpen::CAE::Optimization::TBSSmoothBuilder::MixedMesh

(

)

Returns the choice whether to form quardrilaterals from adjacent triangles
Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::NameDescription* NXOpen::CAE::Optimization::TBSSmoothBuilder::NameDescription

(

)

Returns the name description
Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmoothingOption NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmooth

(

)

Returns the option of how to smooth the original surface
Created in NX8.0.0.

License requirements : None

NXOpen::Expression* NXOpen::CAE::Optimization::TBSSmoothBuilder::ReductionAngle

(

)

Returns the reduction angle that defines the maximal angle between adjacent faces at a node such that the node may be removed during the data reduction
Created in NX8.0.0.

License requirements : None

double NXOpen::CAE::Optimization::TBSSmoothBuilder::ReductionRate

(

)

Returns the reduction rate that defines the percent of faces that should be removed during the data reduction.

   if set to 0, no data reduction occurs. If set to 100, the data reduction sopts when no faces could be removed 

Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFiltering NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFilteringOption

(

)

Returns the result filtering option
Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionCheckingOption NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionChecking

(

)

Returns the option of self-intersection checking
Created in NX8.0.0.

License requirements : None

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetBorder

(

bool

border

)

Sets the option to save border.

If yes, the border of the shell element model will saved
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

border

border

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetFormatOption

(

const std::vector< NXOpen::CAE::Optimization::TBSSmoothBuilder::Format > &

formatOption

)

The output result format mutator
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

formatOption

formatoption

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetIsoTypeOption

(

NXOpen::CAE::Optimization::TBSSmoothBuilder::IsoType

isoTypeOption

)

Sets the option that specifies what should be saved to the output files
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

isoTypeOption

isotypeoption

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetIsoValue

(

double

isoValue

)

Sets the iso value that is used to determine the positions on the element edges where the new nodes are created.

   Larger value lead to models with smaller volume. Value is between 0 and 1 

Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

isoValue

isovalue

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetMixedMesh

(

bool

mixedMesh

)

Sets the choice whether to form quardrilaterals from adjacent triangles
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

mixedMesh

mixedmesh

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetOriginalSurfaceSmooth

(

NXOpen::CAE::Optimization::TBSSmoothBuilder::OriginalSurfaceSmoothingOption

originalSurfaceSmooth

)

Sets the option of how to smooth the original surface
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

originalSurfaceSmooth

originalsurfacesmooth

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetReductionRate

(

double

reductionRate

)

Sets the reduction rate that defines the percent of faces that should be removed during the data reduction.

   if set to 0, no data reduction occurs. If set to 100, the data reduction sopts when no faces could be removed 

Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

reductionRate

reductionrate

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetResultFilteringOption

(

NXOpen::CAE::Optimization::TBSSmoothBuilder::ResultFiltering

resultFilteringOption

)

Sets the result filtering option
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

resultFilteringOption

resultfilteringoption

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetSelfIntersectionChecking

(

NXOpen::CAE::Optimization::TBSSmoothBuilder::SelfIntersectionCheckingOption

selfIntersectionChecking

)

Sets the option of self-intersection checking
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

selfIntersectionChecking

selfintersectionchecking

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetSliceFormat

(

NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormatOption

sliceFormat

)

Sets the slice format
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

sliceFormat

sliceformat

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetSliceNormalVector

(

NXOpen::Direction *

sliceNormalVector

)

Sets the slice normal vector
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

sliceNormalVector

slicenormalvector

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetSliceNumber

(

int

sliceNumber

)

Sets the slice number
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

sliceNumber

slicenumber

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetSmoothCycles

(

int

smoothCycles

)

Sets the number of smoothing cycles.

If set to 0, no smoothing is performed. Larger value leads to smoother models, but may cause the narrowing of thin components
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

smoothCycles

smoothcycles

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetTargetVolume

(

double

targetVolume

)

Sets the target volume that is to be achieved iteratively by varying the isovalue.

If set to 0, the given CAE::Optimization::TBSSmoothBuilder::IsoValue and CAE::Optimization::TBSSmoothBuilder::SetIsoValue is usedfor the generation of the isosurface
Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

targetVolume

targetvolume

void NXOpen::CAE::Optimization::TBSSmoothBuilder::SetUseAdditionalParameters

(

bool

useAdditionalParameters

)

Sets the option to use additional parameter.

Created in NX8.0.0.

License requirements : cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")

Parameters

useAdditionalParameters

useadditionalparameters

NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormatOption NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceFormat

(

)

Returns the slice format
Created in NX8.0.0.

License requirements : None

NXOpen::Direction* NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceNormalVector

(

)

Returns the slice normal vector
Created in NX8.0.0.

License requirements : None

int NXOpen::CAE::Optimization::TBSSmoothBuilder::SliceNumber

(

)

Returns the slice number
Created in NX8.0.0.

License requirements : None

NXOpen::CAE::Optimization::TBSGroupDefinition* NXOpen::CAE::Optimization::TBSSmoothBuilder::SmoothArea

(

)

Returns the area to be smoothed
Created in NX8.0.0.

License requirements : None

int NXOpen::CAE::Optimization::TBSSmoothBuilder::SmoothCycles

(

)

Returns the number of smoothing cycles.

If set to 0, no smoothing is performed. Larger value leads to smoother models, but may cause the narrowing of thin components
Created in NX8.0.0.

License requirements : None

double NXOpen::CAE::Optimization::TBSSmoothBuilder::TargetVolume

(

)

Returns the target volume that is to be achieved iteratively by varying the isovalue.

If set to 0, the given CAE::Optimization::TBSSmoothBuilder::IsoValue and CAE::Optimization::TBSSmoothBuilder::SetIsoValue is usedfor the generation of the isosurface
Created in NX8.0.0.

License requirements : None

bool NXOpen::CAE::Optimization::TBSSmoothBuilder::UseAdditionalParameters

(

)

Returns the option to use additional parameter.

Created in NX8.0.0.

License requirements : None

---

The documentation for this class was generated from the following file:

• CAE_Optimization_TBSSmoothBuilder.hxx