Used to create a Features::ShipDesign::EditStockBuilder which is used to change the stock information on the basic design features. More...

Inheritance diagram for NXOpen::Features::ShipDesign::EditStockBuilder:

Public Member Functions
NXOpen::Features::ShipDesign::SteelFeatureSpreadsheetBuilder *	BuiltUpPillarStock ()
	Returns the stock data used to define the built up stock information of the pillar.

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes	EndCutEnd ()
	Returns the end cut to use at the end of the stiffener sub system.

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes	EndCutStart ()
	Returns the end cut to use at the start of the stiffener sub system.

NXOpen::Expression *	Offset ()
	Returns the offset to apply to the current plate system mold face to produce the desired mold face.

NXOpen::Expression *	OrientationAngle ()
	Returns the angle at which the stiffener system is placed relative to the reference.

NXOpen::Expression *	OrientationAnglePillar ()
	Returns the angle at which the pillar system is placed relative to the reference.

NXOpen::SelectCurve *	OrientationLinePillar ()
	Returns the line specified for the pillar system angle reference.

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::OrientationMethods	OrientationMethod ()
	Returns the method used to define the reference for the orientation angle of stiffener system.

NXOpen::Direction *	OrientationVector ()
	Returns the vector specified for the orientation angle reference.

NXOpen::Features::ShipDesign::SteelFeatureSpreadsheetBuilder *	PillarStock ()
	Returns the stock data used to define the stock information of the pillar.

NXOpen::Features::ShipDesign::PlateStockBuilder *	PlateStock ()
	Returns the plate stock builder, used to define the plate material, grade, thickness, mass density, thicken option and opposite thickness.

bool	Reverse ()
	Returns the indication whether the direction of the flange should be reversed on this stiffener system.

void	SetEndCutEnd (NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes endCutEnd)
	Sets the end cut to use at the end of the stiffener sub system.

void	SetEndCutStart (NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes endCutStart)
	Sets the end cut to use at the start of the stiffener sub system.

void	SetOrientationMethod (NXOpen::Features::ShipDesign::StiffenerSystemBuilder::OrientationMethods orientationMethod)
	Sets the method used to define the reference for the orientation angle of stiffener system.

void	SetOrientationVector (NXOpen::Direction *orientationVector)
	Sets the vector specified for the orientation angle reference.

void	SetPillarDirection (NXOpen::Direction *direction)
	Sets the pillar direction.

void	SetReverse (bool reverse)
	Sets the indication whether the direction of the flange should be reversed on this stiffener system.

NXOpen::SelectTaggedObjectList *	ShipStructure ()
	Returns the ship structures to change the stock information Created in NX8.0.0.

NXOpen::Features::ShipDesign::StiffenerStockBuilder *	StiffenerStock ()
	Returns the stock data used to define the stock information of the stiffener.

void	UpdateStockInformation (NXOpen::NXObject *shipStructure)
	Update stock information.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Used to create a Features::ShipDesign::EditStockBuilder which is used to change the stock information on the basic design features.

 <br> To create a new instance of this class, use @link Features::ShipCollection::CreateEditStockBuilder  Features::ShipCollection::CreateEditStockBuilder @endlink  <br>

Default values.

Property

Value

Offset.Value

0 (millimeters part), 0 (inches part)

PlateStock.KnuckleRatio

3.0

PlateStock.KnuckleSmoothAngle

3.0

PlateStock.MaterialOption

0

PlateStock.OppositeThickness.Value

0 (millimeters part), 0 (inches part)

PlateStock.RestrictThicknessToMaterial

true

PlateStock.ThickenOption

SingleSided

PlateStock.Thickness.Value

10 (millimeters part), 0.5 (inches part)

PlateStock.ThicknessSourceOption

List

StiffenerStock.AnchorPoint

0

StiffenerStock.PlateHeight.Value

50 (millimeters part), 2 (inches part)

StiffenerStock.SectionType

Profile

Created in NX8.0.0.

Member Function Documentation

NXOpen::Features::ShipDesign::SteelFeatureSpreadsheetBuilder* NXOpen::Features::ShipDesign::EditStockBuilder::BuiltUpPillarStock ( )

Returns the stock data used to define the built up stock information of the pillar.

Created in NX9.0.0.

License requirements : None

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes NXOpen::Features::ShipDesign::EditStockBuilder::EndCutEnd ( )

Returns the end cut to use at the end of the stiffener sub system.

Created in NX8.5.0.

License requirements : None

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes NXOpen::Features::ShipDesign::EditStockBuilder::EndCutStart ( )

Returns the end cut to use at the start of the stiffener sub system.

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ShipDesign::EditStockBuilder::Offset ( )

Returns the offset to apply to the current plate system mold face to produce the desired mold face.

       The offset is applied in the thickness direction defined in the plate system feature

Created in NX8.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ShipDesign::EditStockBuilder::OrientationAngle ( )

Returns the angle at which the stiffener system is placed relative to the reference.

Created in NX8.5.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ShipDesign::EditStockBuilder::OrientationAnglePillar ( )

Returns the angle at which the pillar system is placed relative to the reference.

Created in NX8.5.0.

License requirements : None

NXOpen::SelectCurve* NXOpen::Features::ShipDesign::EditStockBuilder::OrientationLinePillar ( )

Returns the line specified for the pillar system angle reference.

Created in NX8.5.0.

License requirements : None

NXOpen::Features::ShipDesign::StiffenerSystemBuilder::OrientationMethods NXOpen::Features::ShipDesign::EditStockBuilder::OrientationMethod ( )

Returns the method used to define the reference for the orientation angle of stiffener system.

Created in NX8.5.0.

License requirements : None

NXOpen::Direction* NXOpen::Features::ShipDesign::EditStockBuilder::OrientationVector ( )

Returns the vector specified for the orientation angle reference.

       Only used when when Method is @link Features::ShipDesign::StiffenerSystemBuilder::OrientationMethodsVector Features::ShipDesign::StiffenerSystemBuilder::OrientationMethodsVector@endlink ..

Created in NX8.5.0.

License requirements : None

NXOpen::Features::ShipDesign::SteelFeatureSpreadsheetBuilder* NXOpen::Features::ShipDesign::EditStockBuilder::PillarStock ( )

Returns the stock data used to define the stock information of the pillar.

Created in NX8.0.0.

License requirements : None

NXOpen::Features::ShipDesign::PlateStockBuilder* NXOpen::Features::ShipDesign::EditStockBuilder::PlateStock ( )

Returns the plate stock builder, used to define the plate material, grade, thickness, mass density, thicken option and opposite thickness.

Created in NX8.0.0.

License requirements : None

bool NXOpen::Features::ShipDesign::EditStockBuilder::Reverse ( )

Returns the indication whether the direction of the flange should be reversed on this stiffener system.

The default direction is based on the ship structure that the stiffener is being built upon.
Created in NX8.5.0.

License requirements : None

void NXOpen::Features::ShipDesign::EditStockBuilder::SetEndCutEnd ( NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes endCutEnd )

Sets the end cut to use at the end of the stiffener sub system.

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

endCutEnd endcutend

void NXOpen::Features::ShipDesign::EditStockBuilder::SetEndCutStart ( NXOpen::Features::ShipDesign::StiffenerSystemBuilder::EndCutTypes endCutStart )

Sets the end cut to use at the start of the stiffener sub system.

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

endCutStart endcutstart

void NXOpen::Features::ShipDesign::EditStockBuilder::SetOrientationMethod ( NXOpen::Features::ShipDesign::StiffenerSystemBuilder::OrientationMethods orientationMethod )

Sets the method used to define the reference for the orientation angle of stiffener system.

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

orientationMethod orientationmethod

void NXOpen::Features::ShipDesign::EditStockBuilder::SetOrientationVector ( NXOpen::Direction * orientationVector )

Sets the vector specified for the orientation angle reference.

       Only used when when Method is @link Features::ShipDesign::StiffenerSystemBuilder::OrientationMethodsVector Features::ShipDesign::StiffenerSystemBuilder::OrientationMethodsVector@endlink ..

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

orientationVector orientationvector

void NXOpen::Features::ShipDesign::EditStockBuilder::SetPillarDirection ( NXOpen::Direction * direction )

Sets the pillar direction.

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

direction direction

void NXOpen::Features::ShipDesign::EditStockBuilder::SetReverse ( bool reverse )

Sets the indication whether the direction of the flange should be reversed on this stiffener system.

The default direction is based on the ship structure that the stiffener is being built upon.
Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

reverse reverse

NXOpen::SelectTaggedObjectList* NXOpen::Features::ShipDesign::EditStockBuilder::ShipStructure ( )

Returns the ship structures to change the stock information
Created in NX8.0.0.

License requirements : None

NXOpen::Features::ShipDesign::StiffenerStockBuilder* NXOpen::Features::ShipDesign::EditStockBuilder::StiffenerStock ( )

Returns the stock data used to define the stock information of the stiffener.

Created in NX8.0.0.

License requirements : None

void NXOpen::Features::ShipDesign::EditStockBuilder::UpdateStockInformation ( NXOpen::NXObject * shipStructure )

Update stock information.

Created in NX8.5.0.

License requirements : nx_ship_basic ("Ship Basic Design")

Parameters

shipStructure ship structure

The documentation for this class was generated from the following file:

Features_ShipDesign_EditStockBuilder.hxx

Public Member Functions

Detailed Description

Member Function Documentation