Represents a Steel Insert Segment Parent sub feature. More...

Inheritance diagram for NXOpen::Die::SteelInsertSegmentParentBuilder:

Public Types
enum	ExtensionTypeOption { ExtensionTypeOptionConstant, ExtensionTypeOptionMaxdistPlusConst, ExtensionTypeOptionLaw }
	Settings for the extension type. More...

enum	InsertTypeOption { InsertTypeOptionTrim, InsertTypeOptionFlange, InsertTypeOptionOffsetFlange }
	Settings for the insert type. More...

Public Member Functions
int	AddEndPointsSwitch ()
	Returns the add end points switch Created in NX4.0.0.

NXOpen::Expression *	BeltThickness ()
	Returns the belt thickness Created in NX4.0.0.

NXOpen::Die::DieBuildStatusOption	BuildStatus ()
	Returns the build status of die sisegs Created in NX4.0.0.

NXOpen::Die::SteelInsertSegmentChildBuilder *	CreateChild ()
	Creates a child siseg.

void	DeleteChild (NXOpen::Die::SteelInsertSegmentChildBuilder *diesisegchild)
	Deletes a child siseg Created in NX4.0.0.

bool	DesignStatus ()
	Returns the design status of die sisegs Created in NX4.0.0.

bool	DisplayStatus ()
	Returns the display status of die sisegs Created in NX4.0.0.

NXOpen::Expression *	ExtensionDistance ()
	Returns the extension distance Created in NX4.0.0.

NXOpen::Die::SteelInsertSegmentParentBuilder::ExtensionTypeOption	ExtensionType ()
	Returns the extension type Created in NX4.0.0.

std::vector < NXOpen::Die::SteelInsertSegmentChildBuilder * >	GetChildren ()
	Outputs the children.

NXOpen::Die::SteelInsertSegmentParentBuilder::InsertTypeOption	InsertType ()
	Returns the insert type Created in NX4.0.0.

NXOpen::Expression *	ProfileRelief ()
	Returns the profile relief Created in NX4.0.0.

bool	ProfileReliefToggle ()
	Returns the profile relief Created in NX4.0.0.

NXOpen::Expression *	ReliefAngle ()
	Returns the relief angle Created in NX4.0.0.

void	SetAddEndPointsSwitch (int addEndPointsSwitch)
	Sets the add end points switch Created in NX4.0.0.

void	SetBeltThickness (const NXString &beltThickness)
	Created in NX4.0.0.

void	SetBeltThickness (const char *beltThickness)
	Created in NX4.0.0.

void	SetDesignStatus (bool designStatus)
	Sets the design status of die sisegs Created in NX4.0.0.

void	SetDisplayStatus (bool displayStatus)
	Sets the display status of die sisegs Created in NX4.0.0.

void	SetExtensionDistance (const NXString &extensionDistance)
	Created in NX4.0.0.

void	SetExtensionDistance (const char *extensionDistance)
	Created in NX4.0.0.

void	SetExtensionType (NXOpen::Die::SteelInsertSegmentParentBuilder::ExtensionTypeOption extensionType)
	Sets the extension type Created in NX4.0.0.

void	SetInsertType (NXOpen::Die::SteelInsertSegmentParentBuilder::InsertTypeOption insertType)
	Sets the insert type Created in NX4.0.0.

void	SetProfileRelief (const NXString &profileRelief)
	Created in NX4.0.0.

void	SetProfileRelief (const char *profileRelief)
	Created in NX4.0.0.

void	SetProfileReliefToggle (bool profileReliefToggle)
	Sets the profile relief Created in NX4.0.0.

void	SetReliefAngle (const NXString &reliefAngle)
	Created in NX4.0.0.

void	SetReliefAngle (const char *reliefAngle)
	Created in NX4.0.0.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a Steel Insert Segment Parent sub feature.

This sub feature is created via the main feature builder.

Created in NX4.0.0.

Member Enumeration Documentation

enum NXOpen::Die::SteelInsertSegmentParentBuilder::ExtensionTypeOption

Settings for the extension type.

Enumerator:

ExtensionTypeOptionConstant	constant
ExtensionTypeOptionMaxdistPlusConst	maximum distance + constant
ExtensionTypeOptionLaw	law

enum NXOpen::Die::SteelInsertSegmentParentBuilder::InsertTypeOption

Settings for the insert type.

Enumerator:

InsertTypeOptionTrim	trim
InsertTypeOptionFlange	flange
InsertTypeOptionOffsetFlange	offset_flange