Represents a DmRadBuilder Builder
Created in NX5.0.0. More...

Inheritance diagram for NXOpen::CAM::DmRadBuilder:

Public Types
enum	RadCutMethodType { RadCutMethodTypeZigzag, RadCutMethodTypeZig }
	Available types for Radial Cut/Cut Method in scop. More...

enum	RadStepoverTypeType { RadStepoverTypeTypeConstant, RadStepoverTypeTypeScallop, RadStepoverTypeTypeTool, RadStepoverTypeTypeMaximum }
	Available types for Stepover for the Radial Cut in scop. More...

enum	RadTraverseDirType { RadTraverseDirTypeForward, RadTraverseDirTypeBackward }
	Available types for Radial Cut/ Traverse Direction. More...

Public Member Functions
NXOpen::CAM::CutPatternBuilder *	CutPatternBuilder ()
	Returns the cut pattern builder Created in NX6.0.0.

NXOpen::CAM::InheritableDoubleBuilder *	DpmrcBoundaryLeftBuilder ()
	Returns the rad band, Opposite Side builder Created in NX5.0.0.

NXOpen::CAM::InheritableDoubleBuilder *	DpmrcBoundaryRightBuilder ()
	Returns the rad band, Material Side builder Created in NX5.0.0.

NXOpen::CAM::StepoverBuilder *	DpmStepoverBuilder ()
	Returns the Stepover builder Created in NX6.0.0.

NXOpen::CAM::InheritableDoubleBuilder *	DpmStepoverMaxBuilder ()
	Returns the Maximum, Stepover for the Radial Cut method.

NXOpen::CAM::InheritableDoubleBuilder *	DpmStepoverMinBuilder ()
	Returns the Constant, Stepover for the Radial Cut method.

NXOpen::CAM::DmRadBuilder::RadCutMethodType	RadCutMethod ()
	Returns the Radial Cut/Cut Method Created in NX5.0.0.

NXOpen::CAM::DmRadBuilder::RadStepoverTypeType	RadStepoverType ()
	Returns the type of Stepover for the Radial Cut method.

NXOpen::CAM::DmRadBuilder::RadTraverseDirType	RadTraverseDir ()
	Returns the Radial Cut/ Traverse Direction Created in NX5.0.0.

void	SetRadCutMethod (NXOpen::CAM::DmRadBuilder::RadCutMethodType radCutMethod)
	Sets the Radial Cut/Cut Method Created in NX5.0.0.

void	SetRadStepoverType (NXOpen::CAM::DmRadBuilder::RadStepoverTypeType stepover)
	Sets the type of Stepover for the Radial Cut method.

void	SetRadTraverseDir (NXOpen::CAM::DmRadBuilder::RadTraverseDirType radTraverseDir)
	Sets the Radial Cut/ Traverse Direction Created in NX5.0.0.

NXOpen::CAM::InheritableDoubleBuilder *	StepoverPercentBuilder ()
	Returns the Tool Diameter, Stepover for the Radial Cut method.

NXOpen::CAM::InheritableDoubleBuilder *	StepoverScallopBuilder ()
	Returns the builder of Scallop Height.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a DmRadBuilder Builder
Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::DmRadBuilder::RadCutMethodType

Available types for Radial Cut/Cut Method in scop.

Enumerator:

RadCutMethodTypeZigzag	Zig-Zag.
RadCutMethodTypeZig	Zig.

enum NXOpen::CAM::DmRadBuilder::RadStepoverTypeType

Available types for Stepover for the Radial Cut in scop.

The enum type is obsolete.

Enumerator:

RadStepoverTypeTypeConstant	Constant.
RadStepoverTypeTypeScallop	Scallop.
RadStepoverTypeTypeTool	Tool Diameter.
RadStepoverTypeTypeMaximum	Maximum.

enum NXOpen::CAM::DmRadBuilder::RadTraverseDirType

Available types for Radial Cut/ Traverse Direction.

Enumerator:

RadTraverseDirTypeForward	Follow Boundary.
RadTraverseDirTypeBackward	Reverse Boundary.

Member Function Documentation

NXOpen::CAM::CutPatternBuilder* NXOpen::CAM::DmRadBuilder::CutPatternBuilder ( )

Returns the cut pattern builder
Created in NX6.0.0.

License requirements : None

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::DpmrcBoundaryLeftBuilder ( )

Returns the rad band, Opposite Side builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::DpmrcBoundaryRightBuilder ( )

Returns the rad band, Material Side builder
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::StepoverBuilder* NXOpen::CAM::DmRadBuilder::DpmStepoverBuilder ( )

Returns the Stepover builder
Created in NX6.0.0.

License requirements : None

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::DpmStepoverMaxBuilder ( )

Returns the Maximum, Stepover for the Radial Cut method.

       This property is obsolete.

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::DpmStepoverMinBuilder ( )

Returns the Constant, Stepover for the Radial Cut method.

       This property is obsolete.

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::DmRadBuilder::RadCutMethodType NXOpen::CAM::DmRadBuilder::RadCutMethod ( )

Returns the Radial Cut/Cut Method
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::DmRadBuilder::RadStepoverTypeType NXOpen::CAM::DmRadBuilder::RadStepoverType ( )

Returns the type of Stepover for the Radial Cut method.

       This property is obsolete.

Created in NX5.0.0.

License requirements : None

NXOpen::CAM::DmRadBuilder::RadTraverseDirType NXOpen::CAM::DmRadBuilder::RadTraverseDir ( )

Returns the Radial Cut/ Traverse Direction
Created in NX5.0.0.

License requirements : None

void NXOpen::CAM::DmRadBuilder::SetRadCutMethod ( NXOpen::CAM::DmRadBuilder::RadCutMethodType radCutMethod )

Sets the Radial Cut/Cut Method
Created in NX5.0.0.

License requirements : None

Parameters

radCutMethod the Radial Cut/Cut Method value

void NXOpen::CAM::DmRadBuilder::SetRadStepoverType ( NXOpen::CAM::DmRadBuilder::RadStepoverTypeType stepover )

Sets the type of Stepover for the Radial Cut method.

       This property is obsolete.

Created in NX5.0.0.

License requirements : None

Parameters

stepover the type of Stepover for the Radial Cut method

void NXOpen::CAM::DmRadBuilder::SetRadTraverseDir ( NXOpen::CAM::DmRadBuilder::RadTraverseDirType radTraverseDir )

Sets the Radial Cut/ Traverse Direction
Created in NX5.0.0.

License requirements : None

Parameters

radTraverseDir the value of Traverse Direction

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::StepoverPercentBuilder ( )

Returns the Tool Diameter, Stepover for the Radial Cut method.

       This property is obsolete.

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::DmRadBuilder::StepoverScallopBuilder ( )

Returns the builder of Scallop Height.

       This property is obsolete.

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

The documentation for this class was generated from the following file:

CAM_DmRadBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation