NXOpen::Features::SheetMetal::BreakCornerBuilder Class Reference

Represents a break corner feature builder. More...

Inheritance diagram for NXOpen::Features::SheetMetal::BreakCornerBuilder:

Public Types
enum	TypeOptions { TypeOptionsFillet, TypeOptionsChamferEqualSetback }
	This enum represents the break corner type. More...

Public Member Functions
std::vector< NXOpen::Edge * >	GetEdges ()
	The array of input edges for the break corner.
std::vector< NXOpen::Face * >	GetFaces ()
	The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.
void	SetEdges (const std::vector< NXOpen::Edge * > &edges)
	The array of input edges for the break corner.
void	SetFaces (const std::vector< NXOpen::Face * > &faces)
	The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.
void	SetType (NXOpen::Features::SheetMetal::BreakCornerBuilder::TypeOptions type)
	Sets the type of the break corner.
void	SetValue (const NXString &filletRadiusOrSetback)
	Created in NX4.0.0.
void	SetValue (const char *filletRadiusOrSetback)
	Created in NX4.0.0.
NXOpen::Features::SheetMetal::BreakCornerBuilder::TypeOptions	Type ()
	Returns the type of the break corner.
int	ValidateBuilderData ()
	Verify that the builder data is valid for creating a break corner.
NXOpen::Expression *	Value ()
	Returns the fillet radius or the setback value, depending on the type of the break corner.
Public Member Functions inherited from NXOpen::Features::SheetMetal::SheetmetalBaseBuilder
NXOpen::Features::SheetMetal::ApplicationContext	GetApplicationContext ()
	Get the application context.
void	SetApplicationContext (NXOpen::Features::SheetMetal::ApplicationContext appContext)
	Set the application context.
Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.
NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.
void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.
bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.
NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.
void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.
void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.
void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.
NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.
void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.
Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.
void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.
std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.
NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.
void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.
Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br>    Use Tag instead.
tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a break corner feature builder.

To create a new instance of this class, use Features::SheetMetal::SheetmetalManager::CreateBreakCornerFeatureBuilder

Created in NX4.0.0.

Member Enumeration Documentation

enum NXOpen::Features::SheetMetal::BreakCornerBuilder::TypeOptions

This enum represents the break corner type.

Enumerator:

TypeOptionsFillet	fillet
TypeOptionsChamferEqualSetback	chamfer equal setback

Member Function Documentation

std::vector<NXOpen::Edge *> NXOpen::Features::SheetMetal::BreakCornerBuilder::GetEdges

(

)

The array of input edges for the break corner.

Returns

Edge list
Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

std::vector<NXOpen::Face *> NXOpen::Features::SheetMetal::BreakCornerBuilder::GetFaces

(

)

The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.

Returns

Face list
Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

void NXOpen::Features::SheetMetal::BreakCornerBuilder::SetEdges

(

const std::vector< NXOpen::Edge * > &

edges

)

The array of input edges for the break corner.

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

Parameters

edges

Edge list

void NXOpen::Features::SheetMetal::BreakCornerBuilder::SetFaces

(

const std::vector< NXOpen::Face * > &

faces

)

The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

Parameters

faces

Face list

void NXOpen::Features::SheetMetal::BreakCornerBuilder::SetType

(

NXOpen::Features::SheetMetal::BreakCornerBuilder::TypeOptions

type

)

Sets the type of the break corner.

        <br> 
           Specify @link Features::SheetMetal::BreakCornerBuilder::TypeOptionsFillet Features::SheetMetal::BreakCornerBuilder::TypeOptionsFillet@endlink  to fillet the edge.
           Specify @link Features::SheetMetal::BreakCornerBuilder::TypeOptionsChamferEqualSetback Features::SheetMetal::BreakCornerBuilder::TypeOptionsChamferEqualSetback@endlink  to chamfer the edge.
        <br> 

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

Parameters

type	Break corner type

void NXOpen::Features::SheetMetal::BreakCornerBuilder::SetValue

(

const NXString &

filletRadiusOrSetback

)

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

Parameters

filletRadiusOrSetback

Either fillet radius or setback value (depending on the type of break corner) NOTE: The full Unicode character set is not supported for this parameter.

void NXOpen::Features::SheetMetal::BreakCornerBuilder::SetValue

(

const char *

filletRadiusOrSetback

)

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

Parameters

filletRadiusOrSetback

Either fillet radius or setback value (depending on the type of break corner) NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::Features::SheetMetal::BreakCornerBuilder::TypeOptions NXOpen::Features::SheetMetal::BreakCornerBuilder::Type

(

)

Returns the type of the break corner.

        <br> 
           Specify @link Features::SheetMetal::BreakCornerBuilder::TypeOptionsFillet Features::SheetMetal::BreakCornerBuilder::TypeOptionsFillet@endlink  to fillet the edge.
           Specify @link Features::SheetMetal::BreakCornerBuilder::TypeOptionsChamferEqualSetback Features::SheetMetal::BreakCornerBuilder::TypeOptionsChamferEqualSetback@endlink  to chamfer the edge.
        <br> 

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

int NXOpen::Features::SheetMetal::BreakCornerBuilder::ValidateBuilderData

(

)

Verify that the builder data is valid for creating a break corner.

        <br> 
            If the Builder data is valid, return value is 0

        <br> 
    @return  Data validity flag (zero for valid and non-zero for invalid) 

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

NXOpen::Expression* NXOpen::Features::SheetMetal::BreakCornerBuilder::Value

(

)

Returns the fillet radius or the setback value, depending on the type of the break corner.

Created in NX4.0.0.

License requirements : nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")

---

The documentation for this class was generated from the following file:

• Features_SheetMetal_BreakCornerBuilder.hxx