NXOpen::CAM Namespace Reference

Provides classes and interfaces for Manufacturing. More...

Namespaces
namespace	FBM
	Provides classes and interfaces relating to Feature Based Machining.

Classes
class	AcrossVoids
	Represents a @link CAM::AcrossVoids CAM::AcrossVoids@endlink Created in NX6.0.0. More...
class	AlongMachineAxisMoveBuilder
	Represents Along MCS Axis Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0. More...
class	AlongMcsAxisMoveBuilder
	Represents Along MCS Axis Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder Created in NX5.0.0. More...
class	AlongToolAxisMoveBuilder
	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateAlongToolAxisMoveBuilder Created in NX5.0.0. More...
class	ArcOutputTypeCiBuilder
	Represents a ArcOutputTypeCiBuilder Created in NX5.0.0. More...
class	AreaMillingContainment
	Represents a Containment Builder Created in NX9.0.0. More...
class	AreaMillingNonSteepContainment
	Represents a NonSteep Containment Builder Created in NX9.0.0. More...
class	AreaMillingSteepContainment
	Represents a Steep Containment Builder Created in NX9.0.0. More...
class	BarrelToolBuilder
	Represents a BarrelTool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateBarrelToolBuilder Created in NX5.0.0. More...
class	Blade
	Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.0.0. More...
class	BladeCutLevels
	Represents a Blade Cut Levels Builder This is an abstract class and cannot be instantiated. More...
class	BladeCutStart
	Represents a Blade Rough Drive Method Builder This is an abstract superclass that has instantaible subclasses Created in NX7.5.0. More...
class	BladeEdge
	Represents a BladeEdge Builder Created in NX7.0.0. More...
class	BladeFinish
	Represents a Blade Finish Drive Method Builder Created in NX7.5.0. More...
class	BladeFinishGeom
	Represents BladeFinishGeom Builder Created in NX7.5.0. More...
class	BladeRough
	Represents a Blade Rough Drive Method Builder Created in NX7.0.0. More...
class	BladeStartPoint
	Represents BladeStartPoint Builder Created in NX7.5.0. More...
class	BlankIpw
	Represents the blank ipw builder for blank definition To obtain an instance of this class use the CAM::GeometryGroup Created in NX8.0.0. More...
class	BlendFinish
	Represents a Blend Finish Drive Method Builder Created in NX7.5.0. More...
class	Boundary
	Represents a CAM boundary object Created in NX9.0.0. More...
class	BoundaryMemberSet
	Represents a boundary member set . More...
class	BoundaryMemberSetList
	Represents a list of objects. More...
class	BoundaryMillingMemberSet
	Represents a boundary member set . More...
class	BoundaryMillingSet
	Represents a boundary milling set. More...
class	BoundarySet
	Represents a boundary set. More...
class	BoundarySetList
	Represents a list of objects. More...
class	CAMAttribute
	Represents a CAM Feature Attribute To obtain an instance of this class use CAM::CAMFeature Created in NX8.0.0. More...
class	CAMAttributeCollection
	Represents the CAM Attribute collection To obtain an instance of this class, refer to CAM::CAMFeature Created in NX8.0.0. More...
class	CAMFeature
	Represents a CAM Feature To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX7.5.0. More...
class	CAMFeatureCollection
	Represents the CAMFeature collection To obtain an instance of this class, refer to BasePart Created in NX7.5.0. More...
class	CAMFeatureList
	Represents a list of objects. More...
class	CAMObject
	Represents interface for all CAM Object To create or edit an instance of this class, use CAM::ParamBuilder Created in NX4.0.0. More...
class	CAMSession
	Represents cam session To obtain an instance of this class, refer to Session Created in NX4.0.0. More...
class	CAMSetup
	cam setup To obtain an instance of this class, use Part::CAMSetup Created in NX4.0.0. More...
class	CavityMilling
	Represents a Cavity Milling Operation To create or edit an instance of this class, use CAM::CavityMillingBuilder Created in NX7.5.0. More...
class	CavityMillingBuilder
	Represents a CavityMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateCavityMillingBuilder Created in NX5.0.0. More...
class	CenterlineDrillTurning
	Represents a Centerline Drill Turning operation To create or edit an instance of this class, use CAM::CenterlineDrillTurningBuilder Created in NX7.5.0. More...
class	CenterlineDrillTurningBuilder
	Represents a CenterlineDrillTurningBuilder To create a new instance of this class, use CAM::OperationCollection::CreateCenterlineDrillTurningBuilder Created in NX6.0.0. More...
class	CenterlineDrillVariableIncrementBuilder
	Represents a Turn Avoidance Path Points Builder Created in NX6.0.0. More...
class	ChipControl
	Represents a CAM::ChipControl. More...
class	CircularAboutAxisMoveBuilder
	Represents the Circular Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder Created in NX5.0.0. More...
class	CleanupOutput
	Represents a @link CAM::CleanupOutput CAM::CleanupOutput@endlink Created in NX6.0.0. More...
class	CleanupSettings
	Represents a @link CAM::CleanupSettings CAM::CleanupSettings@endlink Created in NX6.0.0. More...
class	CollisionConfigurationBuilder
	Represents a CAM::CollisionConfigurationBuilder This is an abstract class, and cannot be instantiated. More...
class	CollisionPairBuilder
	Represents a CAM::CollisionPairBuilder To create a new instance of this class, use SIM::KinematicConfigurator::CreateCollisionPairBuilder Created in NX6.0.0. More...
class	CollisionPairBuilderList
	Represents a list of objects. More...
class	ContourAngle
	Represents a CAM::ContourAngle. More...
class	ConvertFromMCDBuilder
	Represents a CAM::ConvertFromMCDBuilder To create a new instance of this class, use SIM::KinematicConfigurator::CreateConvertFromMcdBuilder Created in NX9.0.0. More...
class	CornerControlBuilder
	Represents a FinishPasses Builder Created in NX6.0.0. More...
class	CustomLoops
	Represents a CustomLoops object. More...
class	CustomLoopSet
	Represents a loop set object To create a new instance of this class, use CAM::CustomLoops::CreateLoopSet More...
class	CustomLoopSetList
	Represents a list of objects. More...
class	CutAngle
	Represents a boundary cut angle ci Builder Created in NX6.0.0. More...
class	CutBand
	Cut Band Builder Created in NX7.5.0. More...
class	Cutcom
	Represents a CAM::Cutcom Created in NX6.0.2. More...
class	CutDepthChecker
	Represents a cut depth checker object This has not creator Created in NX8.5.0. More...
class	CutDirection
	Represents a boundary cut direction ci Builder This builder can not instantiated separately. More...
class	CutDwell
	Represents a CAM::CutDwell. More...
class	CutLevel
	Represents a cut level object for cavity mill and zlevel mill. More...
class	CutLevelPlanar
	Represents a cut level object for planar mill. More...
class	CutParameters
	Represents a CAM::CutParameters. More...
class	CutPatternBuilder
	Represents a Cut Pattern Builder Created in NX6.0.0. More...
class	CutSides
	Represents a Cut Sides Builder Created in NX7.5.0. More...
class	CutStrategy
	Represents cut strategy Created in NX6.0.0. More...
class	CutVolume
	The classs represent the sub builder for creating cut volume feature items To create a new instance of this class, use CAM::CutVolumeGeom::CreateCutVolume Created in NX8.0.0. More...
class	CutVolumeGeom
	The classs represent the builder for creating cut volume features Created in NX8.0.0. More...
class	CutVolumeList
	Represents a list of objects. More...
class	Cycle
	Represets a User Defined Event Created in NX9.0.0. More...
class	CylinderMillingBuilder
	Represents a CylinderMillingBuilder Builder To create a new instance of this class, use CAM::OperationCollection::CreateCylinderMillingBuilder Created in NX8.0.0. More...
class	CylinderMillingCutParameters
	Represents a CylinderMillingCutParameters Builder Created in NX8.0.0. More...
class	DeltaMoveBuilder
	Represents the Delta Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateDeltaMoveBuilder Created in NX5.0.0. More...
class	DisplayPaint
	Represents a display paint Builder This is an abstract class and cannot be instantiated. More...
class	DisplayPath
	Represents a display path Builder This is an abstract class and cannot be instantiated. More...
class	DisplaySilhouette
	Represents a display silhouette Builder This is an abstract class and cannot be instantiated. More...
class	DisplayTool
	Represents a display tool Builder This is an abstract class and cannot be instantiated. More...
class	DmAmBuilder
	Represents a Area Milling Drive Method Builder Created in NX5.0.0. More...
class	DmBndBuilder
	Represents a Boundary Drive Method Builder Created in NX5.0.0. More...
class	DmCmBuilder
	Represents a DmCmBuilder Created in NX5.0.0. More...
class	DmCmMultiplePassesCiBuilder
	Represents a DmCmMultiplePassesCiBuilder To obtain an instance of this class use CAM::DmCmBuilder::DmCmMultiplePassesBuilder Created in NX5.0.0. More...
class	DmCurveBuilder
	Represents a Curve Drive Method Builder Created in NX5.0.0. More...
class	DmRadBuilder
	Represents a DmRadBuilder Builder Created in NX5.0.0. More...
class	DmRotaryFloorFinishBuilder
	represent rotary floor finish builder Created in NX9.0.0. More...
class	DmSpiralBuilder
	Represents a Spiral Drive Method Builder This is an abstract class and cannot be instantiated. More...
class	DmSurfBuilder
	Represents a DmSurfBuilder Created in NX5.0.0. More...
class	DmTpBuilder
	Represents a tool path Drive Method Builder This is an abstract class and cannot be instantiated. More...
class	DmUserExitCiBuilder
	Represents a exit name ci Builder Created in NX5.0.0. More...
struct	DoubleIntentData
	The data for CamUI_DoubleIntentComp Created in NX5.0.0. More...
struct	DoubleStatusData
	The data for CamUI_DoubleStatusComp Created in NX5.0.0. More...
class	DPMItpBuilder
	Represents an DPMItp Builder To create a new instance of this class, use CAM::OperationCollection::CreateDpmitpBuilder Created in NX5.0.0. More...
class	DrillBackSpotfacingToolBuilder
	Represents a drill back spotfacing Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBackSpotfacingToolBuilder Created in NX5.0.0. More...
class	DrillBoreToolBuilder
	Represents a drill bore Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBoreToolBuilder Created in NX5.0.0. More...
class	DrillBurnishingToolBuilder
	Represents a drill burnishing Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillBurnishingToolBuilder Created in NX5.0.0. More...
class	DrillCenterBellToolBuilder
	Represents a Drill Center Bell Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCenterBellToolBuilder Created in NX5.0.0. More...
class	DrillCoreToolBuilder
	Represents a drill core Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCoreToolBuilder Created in NX9.0.0. More...
class	DrillCounterboreToolBuilder
	Represents a drill counterbore Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCounterboreToolBuilder Created in NX5.0.0. More...
class	DrillCtskToolBuilder
	Represents a Drill Ctsk Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillCtskToolBuilder Created in NX5.0.0. More...
class	DrillGeomBuilder
	Represents a DrillGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillGeomBuilder Created in NX5.0.0. More...
class	DrillMethodBuilder
	Represents a Drill Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillMethodBuilder Created in NX5.0.0. More...
class	DrillReamerToolBuilder
	Represents a drill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillReamerToolBuilder Created in NX5.0.0. More...
class	DrillSpotdrillToolBuilder
	Represents a drill spotdrill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillSpotdrillToolBuilder Created in NX5.0.0. More...
class	DrillSpotfaceToolBuilder
	Represents a drill spotface tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillSpotfaceToolBuilder Created in NX5.0.0. More...
class	DrillStdToolBuilder
	Represents a drill std Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillStdToolBuilder Created in NX5.0.0. More...
class	DrillStepToolBuilder
	Represents a drill step Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillStepToolBuilder Created in NX5.0.0. More...
class	DrillSurfaceBuilder
	Represents a Drill Surface Builder This is an abstract class and cannot be instantiated. More...
class	DrillTapToolBuilder
	Represents a drill tap Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillTapToolBuilder Created in NX5.0.0. More...
class	DrillThreadMillToolBuilder
	Represents a drill thread mill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateDrillThreadMillToolBuilder Created in NX5.0.0. More...
class	DrillToolBuilder
	Represents a drill Tool Builder This is an abstract class, and cannot be instantiated. More...
class	DriveChainItemBuilder
	Represents the Drive Chain Item Builder This cannot be instantiated Created in NX6.0.0. More...
class	DriveChainItemBuilderList
	Represents a list of objects. More...
class	DriveMode
	Drive Mode Builder Created in NX7.5.0. More...
class	EdgeFinish
	Represents a Blade Finish Drive Method Builder Created in NX7.5.0. More...
class	Engraving
	Represents a Engraving Operation To create or edit an instance of this class, use CAM::EngravingBuilder Created in NX7.5.0. More...
class	EngravingBuilder
	Represents a Engraving Builder To create a new instance of this class, use CAM::OperationCollection::CreateEngravingBuilder Created in NX5.0.0. More...
class	ExtendAtEdges
	Represents a @link CAM::ExtendAtEdges CAM::ExtendAtEdges@endlink Created in NX6.0.0. More...
class	FaceMilling
	Represents a Face Milling Operation To create or edit an instance of this class, use CAM::FaceMillingBuilder Created in NX7.5.0. More...
class	FaceMillingBuilder
	Represents a FaceMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateFaceMillingBuilder Created in NX5.0.0. More...
class	FacesSequence
	Represents faces sequence Created in NX6.0.0. More...
class	FeatureBasedGeomBuilder
	Represents a FeatureBasedGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateFeatureBasedGeomBuilder Created in NX5.0.0. More...
class	FeatureGeomBuilder
	Represents a FeatureGeom Builder This is an abstract class, and cannot be instantiated. More...
class	FeatureGeometry
	Represents a Base Geometry Group To create or edit an instance of this class, use CAM::FeatureGeomBuilder Created in NX7.5.0. More...
class	FeatureGeometryGroup
	Represents a CAM Feature Group To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX8.0.0. More...
class	FeatureMilling
	Represents a Feature Milling Operation To create or edit an instance of this class, use CAM::FeatureMillingBuilder Created in NX7.5.0. More...
class	FeatureMillingBuilder
	Represents a FeatureMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateFeatureMillingBuilder Created in NX5.0.0. More...
class	FeatureProcessBuilder
	The Create Feature Process Builder class creates operations and features groups <br> To create a new instance of this class, use @link CAM::CAMSetup::CreateFeatureProcessBuilder CAM::CAMSetup::CreateFeatureProcessBuilder @endlink <br> Default values. More...
class	FeatureRecognitionBuilder
	Represents a FeatureRecognition Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeatureRecognitionBuilder Created in NX6.0.0. More...
class	FeatureTeaching
	Represents a FeatureTeaching Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeatureTeaching Created in NX8.0.0. More...
class	FeedsBuilder
	Represents a feeds Builder Created in NX5.0.0. More...
class	FeedsOptimizationData
	Represents a CAM::FeedsOptimizationData. More...
class	FeedsOptimizeBuilder
	Represents a CAM::FeedsOptimizeBuilder a "commit" of this object will perform the Feed Rate Optimization. More...
struct	FeedStatusData
	The data for CamUI_FeedStatusComp Created in NX5.0.0. More...
class	FeedsTurnBuilder
	Represents a turning feeds Builder Created in NX5.0.0. More...
class	FeedsWedmBuilder
	Represents a wedm feeds Builder Created in NX5.0.0. More...
class	FinishDwell
	Represents a CAM::FinishDwell. More...
class	FinishPassesBuilder
	Represents a FinishPasses Builder This is an abstract class, and cannot be instantiated. More...
class	FinishTurning
	Represents a Turn Finishing operation To create or edit an instance of this class, use CAM::FinishTurningBuilder Created in NX7.5.0. More...
class	FinishTurningBuilder
	Represents a FinishTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateFinishTurningBuilder Created in NX6.0.0. More...
class	FirstPlunge
	Represents the first plunge Created in NX6.0.0. More...
class	FlowBuilder
	Represents a FlowBuilder Builder This is an abstract class and cannot be instantiated. More...
class	FlowCutSteepContainment
	Represents a Steep Containment Builder Created in NX7.5.0. More...
class	FollowCurveMoveBuilder
	Represents the Follow Curve Move Builder <br> To create a new instance of this class, use @link CAM::MoveCollection::CreateFollowCurveMoveBuilder CAM::MoveCollection::CreateFollowCurveMoveBuilder @endlink <br> Default values. More...
class	FollowGeometryMoveBuilder
	Represents the Follow Geometry Move Builder This is an abstract class, and cannot be created. More...
class	FollowPartMoveBuilder
	Represents the Follow Part Move Builder <br> To create a new instance of this class, use @link CAM::MoveCollection::CreateFollowPartMoveBuilder CAM::MoveCollection::CreateFollowPartMoveBuilder @endlink <br> Default values. More...
class	FormEdgesBuilder
	Represents a FormEdges Builder Created in NX6.0.0. More...
class	FormToolBuilder
	Represents a Form tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateFormToolBuilder Created in NX5.0.0. More...
class	GenericMotionControl
	Represents a Generic Motion Control operation To create or edit an instance of this class, use CAM::GmcOpBuilder Created in NX7.5.0. More...
class	GenericToolBuilder
	Represents a Generic Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateGenericToolBuilder Created in NX5.0.0. More...
class	GenericTrackingBuilder
	Represents a GenericTracking Builder To create a new instance of this class, use CAM::Tool::CreateGenericTrackingBuilder Created in NX5.0.0. More...
class	Geometry
	Represents a CAM geometry object Created in NX8.0.0. More...
class	GeometryCiBuilder
	Represents a geometry ci Builder Created in NX5.0.0. More...
class	GeometryGroup
	Represents a CAM geometry builder for group level Created in NX8.0.0. More...
class	GeometrySet
	Represents a geometry set for a CAM object. More...
class	GeometrySetList
	Represents a list of objects. More...
class	GmcOpBuilder
	Represents a GmcOp Builder To create a new instance of this class, use CAM::OperationCollection::CreateGmcopBuilder Created in NX5.0.0. More...
class	GrooveMilling
	Represents a Groove Milling Operation To create or edit an instance of this class, use CAM::GrooveMillingBuilder Created in NX9.0.0. More...
class	GrooveMillingBuilder
	Represents a GrooveMillingBuilder To create a new instance of this class, use CAM::OperationCollection::CreateGrooveMillingBuilder Created in NX9.0.0. More...
class	GrooveToolBuilder
	Represents a Groove tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateGrooveToolBuilder Created in NX5.0.0. More...
class	GroupFeatures
	Represents the group features command <br> To create a new instance of this class, use @link CAM::NCGroupCollection::CreateGroupFeatures CAM::NCGroupCollection::CreateGroupFeatures @endlink <br> Default values. More...
class	HolderSectionBuilder
	Represents a Holder Section Builder Created in NX5.0.0. More...
class	HoldingSystemBuilder
	Represents a CAM::HoldingSystemBuilder This is an abstract class, and cannot be instantiated. More...
class	HoldingSystemBuilderList
	Represents a list of objects. More...
class	HoleBossGeom
	Represents a CAM geometry builder This is an abstract class and cannot be instantiated. More...
class	HoleBossGeometry
	Represents a CAM geometry builder To create a new instance of this class, use CAM::NCGroupCollection::CreateHoleBossGeometryBuilder Created in NX7.5.0. More...
class	HoleBossSet
	Represents a Cut Area Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateHoleBossBuilder Created in NX7.5.0. More...
class	HoleBossSetList
	Represents a list of objects. More...
class	HoleDrillingBuilder
	Represents a HoleDrillingBuilder Builder To create a new instance of this class, use CAM::OperationCollection::CreateHoleDrillingBuilder Created in NX9.0.0. More...
class	HoleDrillingCutParameters
	Represents a HoleDrillingCutParameters Builder Created in NX9.0.0. More...
class	HoleMachiningBuilder
	Represents a HoleMachiningBuilder Builder This is an abstract class and cannot be instantiated. More...
class	HoleMachiningCutParameters
	Represents a HoleMachiningCutParameters Builder This is an abstract class and cannot be instantiated. More...
class	HoleMaking
	Represents a Hole Making operation To create or edit an instance of this class, use CAM::HoleMakingBuilder Created in NX7.5.0. More...
class	HoleMakingBuilder
	Represents a HoleMaking Builder To create a new instance of this class, use CAM::OperationCollection::CreateHoleMakingBuilder Created in NX5.0.0. More...
class	HubFinish
	Represents a Hub Finish Drive Method Builder Created in NX7.5.0. More...
class	InferredDouble
	Represents a builder for an inferred value in of a CAM.CAMObject Created in NX7.5.0. More...
class	Inheritable2dLength
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0. More...
class	InheritableBuilder
	Represents a builder for an inheritable value in of a CAM.CAMObject Created in NX6.0.0. More...
class	InheritableDoubleBuilder
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0. More...
class	InheritableFeedBuilder
	Represents a builder for an inheritable feed value in of a CAM.CAMObject Created in NX5.0.0. More...
class	InheritableFeedModeBuilder
	Represents a builder for an inheritable enum value in of a CAM.CAMObject Created in NX8.0.0. More...
class	InheritableIntBuilder
	Represents a builder for an inheritable integer value in of a CAM.CAMObject Created in NX5.0.0. More...
class	InheritableTextBuilder
	Represents a builder for an inheritable text value in of a CAM.CAMObject Created in NX5.0.0. More...
class	InheritableToolDepBuilder
	Represents a builder for an inheritable tool dependent value in of a CAM.CAMObject Created in NX5.0.0. More...
class	InitialProfilePlunge
	Represents the initial profile plunge Created in NX7.5.0. More...
class	InPathEventDataBuilder
	Represents a InPath Event Data Builder To create a new instance of this class, use CAM::WedmCustomBoundaryDataBuilder::CreateInpathEventDataBuilder Created in NX5.0.0. More...
class	InPathEventDataBuilderList
	Represents a list of objects. More...
class	InPathEventSetData
	Represents in path event This is a sub-builder class and cannot be directly instantiated Created in NX7.5.0. More...
class	InspectionAlignmentBuilder
	Represents a CMM Inspection Alignment builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAlignmentBuilder Created in NX7.5.2. More...
class	InspectionAnalyzeBuilder
	Inspection Analyze options dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAnalyzeBuilder Created in NX8.5.0. More...
class	InspectionAnalyzeOutputBuilder
	Inspection Analyze Output options dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionAnalyzeOutputBuilder Created in NX8.5.1. More...
class	InspectionArcFeatureBuilder
	Represents a CMM Inspection Arc Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionArcFeatureBuilder Created in NX7.0.0. More...
class	InspectionAxisExtrapolationModeBuilder
	Represents a builder for an inheritable axis extrapolation mode enum value Created in NX8.5.1. More...
class	InspectionCircleFeatureBuilder
	Represents a CMM Inspection Circle Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCircleFeatureBuilder Created in NX7.0.0. More...
class	InspectionCmmCommandBuilder
	Represents a CMM Inspection miscellaneous command builder. More...
class	InspectionCollisionAvoidanceBuilder
	Collision Avoidance Dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCollisionAvoidanceBuilder Created in NX8.0.0. More...
class	InspectionConeFeatureBuilder
	Represents a CMM Inspection Cone Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionConeFeatureBuilder Created in NX7.0.0. More...
class	InspectionConstructedFeatureBuilder
	Represents a CMM Inspection Constructed Feature Builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionConstructedFeatureBuilder Created in NX7.0.0. More...
class	InspectionCparlnFeatureBuilder
	Represents a CMM Inspection Cparln Feature Builder. More...
class	InspectionCreatePathsBuilder
	Create Paths Dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCreatePathsBuilder Created in NX7.0.0. More...
class	InspectionCurveFeatureBuilder
	Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCurveFeatureBuilder Created in NX7.0.0. More...
class	InspectionCylinderCircleFitModeBuilder
	Represents a builder for an inheritable cylinder/circle fitting mode enum value Created in NX8.5.1. More...
class	InspectionCylinderFeatureBuilder
	Represents a CMM Inspection Cylinder Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionCylinderFeatureBuilder Created in NX7.0.0. More...
class	InspectionDatumPlaneFittingModeBuilder
	Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1. More...
class	InspectionDeltaMoveBuilder
	Represents the builder for the CMM Inspection sub-operation Delta Move. More...
class	InspectionEdgePointFeatureBuilder
	Represents a CMM Inspection Edge Point Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionEdgePointFeatureBuilder Created in NX9.0.0. More...
class	InspectionGroup
	Represents a group for CMM Inspection To obtain an instance of this class us CAM::InspectionGroupCollection Created in NX7.0.0. More...
class	InspectionGroupCollection
	Represents the group collection for CMM Inspection To obtain an instance of this class, refer to CAM::InspectionSetup Created in NX7.0.0. More...
class	InspectionLimitsOfSizeModeBuilder
	Represents a builder for an inheritable limits of size mode enum value Created in NX8.5.1. More...
class	InspectionLinear5axisMoveToPointBuilder
	Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point. More...
class	InspectionLinearMoveToPointBuilder
	Represents the builder for the CMM Inspection sub-operation Linear Move To Point. More...
class	InspectionLineFeatureBuilder
	Represents a CMM Inspection Line Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionLineFeatureBuilder Created in NX7.0.0. More...
class	InspectionLinkPmiBuilder
	Create Link PMI Dialog Builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionLinkPmiBuilder Created in NX7.0.0. More...
class	InspectionMeasDataBuilder
	Inspection Measured Data dialog builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionMeasDataBuilder Created in NX8.5.0. More...
class	InspectionMeasurePointBuilder
	Represents the builder for the CMM Inspection sub-operation Measure Point. More...
class	InspectionMethodBuilder
	Represents the builder for a CMM Inspection method. More...
class	InspectionMoveBuilder
	Represents CMM Inspection Move Builder This cannot be instantiated Created in NX7.0.0. More...
class	InspectionMoveCollection
	Represents the Inspection move collection To obtain an instance of this class, refer to CAM::InspectionOperation Created in NX7.0.0. More...
class	InspectionMoveSubop
	Represents CMM Inspection Move To obtain an instance of this class use CAM::InspectionMoveCollection Created in NX7.0.0. More...
class	InspectionMoveSubopCollection
	Represents the Inspection move collection contained by point set subops To obtain an instance of this class, refer to CAM::InspectionMoveSubop Created in NX7.0.0. More...
class	InspectionOperation
	Represents an Inspection operation To obtain an instance of this class use CAM::InspectionOperationCollection Created in NX7.0.0. More...
class	InspectionOperationCollection
	Represents the CMM Inspection operation collection To obtain an instance of this class, refer to CAM::InspectionSetup Created in NX7.0.0. More...
class	InspectionOutputOperationBuilder
	this class creates the output operation To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionOutputOperationBuilder Created in NX7.0.0. More...
class	InspectionParplnFeatureBuilder
	Represents a CMM Inspection Parpln Feature Builder. More...
class	InspectionPathBuilder
	Represents the builder for a CMM Inspection path. More...
class	InspectionPathPointBuilder
	Represents an inspection path point builder Created in NX8.5.0. More...
class	InspectionPatternFeatureBuilder
	Represents a CMM Inspection Pattern Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPatternFeatureBuilder Created in NX7.0.0. More...
class	InspectionPlaneFeatureBuilder
	Represents a CMM Inspection Plane Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPlaneFeatureBuilder Created in NX7.0.0. More...
class	InspectionPointFeatureBuilder
	Represents a CMM Inspection Point Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionPointFeatureBuilder Created in NX7.0.0. More...
class	InspectionProbeToolBuilder
	Represents an Inspection Probe Tool Builder To create a new instance of this class, use CAM::InspectionGroupCollection::CreateInspectionProbeToolBuilder Created in NX9.0.0. More...
class	InspectionProbeTrackingBuilder
	Represents a InspectionProbeTracking builder To create a new instance of this class, use CAM::InspectionTool::CreateInspectionProbeTrackingBuilder Created in NX9.0.0. More...
class	InspectionProfileDispositionModeBuilder
	Represents a builder for an inheritable profile disposition mode enum value Created in NX8.5.1. More...
class	InspectionReferenceFeatureModeBuilder
	Represents a builder for an inheritable reference feature mode enum value Created in NX9.0.0. More...
class	InspectionScanArcBuilder
	Represents the builder for the CMM Inspection sub-operation Scan Arc. More...
class	InspectionScanCurve5AxisBuilder
	Represents the builder for the CMM Inspection sub-operation Scan Curve. More...
class	InspectionScanCurveBuilder
	Represents the builder for the CMM Inspection sub-operation Scan Curve. More...
class	InspectionScanHelixBuilder
	Represents the builder for the CMM Inspection sub-operation Scan Helix. More...
class	InspectionScanLineBuilder
	Represents the builder for the CMM Inspection sub-operation Scan Line. More...
class	InspectionSensorBuilder
	Represents the builder for a CMM Inspection Sensor. More...
class	InspectionSensorMassEditBuilder
	Edit Multiple Subops Dialog builder To create a new instance of this class, use CAM::InspectionMoveCollection::CreateInspectionSensorMassEditBuilder Created in NX7.5.3. More...
class	InspectionSensorStrategyBuilder
	Represents a builder for an inheritable sensor strategy enum value Created in NX9.0.0. More...
class	InspectionSetup
	Inspection setup Use the Part class to get or create an inspection setup Created in NX7.0.0. More...
class	InspectionSphereFeatureBuilder
	Represents a CMM inspection sphere feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionSphereFeatureBuilder Created in NX7.0.0. More...
class	InspectionSurfaceFeatureBuilder
	Represents a CMM Inspection Curve Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionSurfaceFeatureBuilder Created in NX7.0.0. More...
class	InspectionSurfaceProfileModeBuilder
	Represents a builder for an inheritable datum plane fitting mode enum value Created in NX8.5.1. More...
class	InspectionToleranceOperationBuilder
	this class creates the tolerance operation To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionToleranceOperationBuilder Created in NX7.0.0. More...
class	InspectionTool
	Represents an Inspection group To obtain an instance of this class use CAM::InspectionGroupCollection Created in NX7.0.0. More...
class	InspectionTorusFeatureBuilder
	Represents a CMM Inspection Torus Feature builder To create a new instance of this class, use CAM::InspectionOperationCollection::CreateInspectionTorusFeatureBuilder Created in NX7.0.0. More...
class	InspectionTrackPointCollection
	Represents the inspection track point collection To obtain an instance of this class, refer to CAM::InspectionTool Created in NX7.0.0. More...
class	InspectionUVGridBuilder
	Represents the builder for the CMM Inspection UV Grid sub-operation. More...
class	InterpolateAngle
	Represents builder of Interpolate Angle, one option of Tool Axis Created in NX7.5.0. More...
class	InterpolateVector
	Represents builder of Interpolate Vector, one option of Tool Axis Created in NX7.5.0. More...
struct	IntStatusData
	The data for CamUI_IntStatusComp Created in NX5.0.0. More...
class	IpwAnalysisBuilder
	Represents a CAM::IpwAnalysisBuilder This is an abstract class, and cannot be instantiated. More...
class	IpwContainmentCurvesBuilder
	Represents a CAM::IpwContainmentCurvesBuilder This is an abstract class, and cannot be instantiated. More...
class	LaserCircleCutout
	Represents a LaserCircleCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserCircleCutout Created in NX9.0.0. More...
class	LaserControlPoint
	Represents a Laser Control Point builder To create a new instance of this class, use CAM::LaserProfileMove::CreateControlPoint Created in NX9.0.0. More...
class	LaserControlPointList
	Represents a list of objects. More...
class	LaserCutDirection
	Represents cut direction settings for laser move Created in NX9.0.0. More...
class	LaserCutoutDefinition
	Represents cutout definition settings for laser move Created in NX9.0.0. More...
class	LaserHeadOrientation
	Represents head orientation settings for laser sub move Created in NX9.0.0. More...
class	LaserHexagonCutout
	Represents a LaserHexagonCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserHexagonCutout Created in NX9.0.0. More...
class	LaserLinearMove
	Represents a LaserLinearMove To create a new instance of this class, use CAM::MoveCollection::CreateLaserLinearMove Created in NX9.0.0. More...
class	LaserMethod
	Represents a Laser Method To create a new instance of this class, use CAM::NCGroupCollection::CreateLaserMethod Created in NX9.0.0. More...
class	LaserPiercingPoint
	Represents piercing point settings for laser move Created in NX9.0.0. More...
class	LaserProfileMove
	Represents a LaserProfileMove To create a new instance of this class, use CAM::MoveCollection::CreateLaserProfileMove Created in NX9.0.0. More...
class	LaserRectangleCutout
	Represents a LaserRectangleCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserRectangleCutout Created in NX9.0.0. More...
class	LaserSlotCutout
	Represents a LaserSlotCutout To create a new instance of this class, use CAM::MoveCollection::CreateLaserSlotCutout Created in NX9.0.0. More...
class	LaserTeachMode
	Represents a Laser TeachMode To create a new instance of this class, use CAM::OperationCollection::CreateLaserTeachMode Created in NX9.0.0. More...
class	LaserTool
	Represents a Laser Tool To create a new instance of this class, use CAM::NCGroupCollection::CreateLaserTool Created in NX9.0.0. More...
class	LatheMachineControl
	Represents a Lathe Machine Control operation To create or edit an instance of this class, use CAM::LatheMachineControlBuilder Created in NX7.5.0. More...
class	LatheMachineControlBuilder
	Represents a LatheMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateLatheMachineControlBuilder Created in NX5.0.0. More...
class	LatheUserDefined
	Represents a Lathe User Defined operation To create or edit an instance of this class, use CAM::LatheUserDefinedBuilder Created in NX7.5.0. More...
class	LatheUserDefinedBuilder
	Represents a LatheUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateLatheUserDefinedBuilder Created in NX5.0.0. More...
class	LayoutCiBuilder
	Represents a layout ci Builder Created in NX5.0.0. More...
class	LeadAngles
	Represents a lead angles Created in NX8.5.0. More...
class	LevelToLevel
	Represents a @link CAM::LevelToLevel CAM::LevelToLevel@endlink Created in NX6.0.0. More...
class	LowerLimit
	Represents a CAM::LowerLimit. More...
class	MachineGroupBuilder
	Represents a MachineGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineGroupBuilder Created in NX5.0.0. More...
class	MachineHeadGroupBuilder
	Represents a MachineHeadGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineHeadGroupBuilder Created in NX5.0.0. More...
class	MachinePocketGroupBuilder
	Represents a MachinePocketGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachinePocketGroupBuilder Created in NX5.0.0. More...
class	MachineTurretGroupBuilder
	Represents a MachineTurretGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMachineTurretGroupBuilder Created in NX5.0.0. More...
class	MachiningFeature
	Represents a CAM::CAMFeature builder To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX8.0.0. More...
class	MachiningFeatureGeom
	This class represent the builder for machining feature geometry. More...
class	ManageToolPartBuilder
	Represents an Export Tool Part Builder This is an abstract class, and cannot be instantiated. More...
class	ManualFeatureBuilder
	Represents a CAM::ManualFeatureBuilder To obtain an instance of this class use CAM::FeatureRecognitionBuilder Created in NX6.0.0. More...
class	ManualFeatureBuilderList
	Represents a list of objects. More...
class	ManualMove
	Represents Manual Move To obtain an instance of this class us CAM::OperationCollection Created in NX4.0.0. More...
class	MaxCutTraverse
	Represents a CAM::MaxCutTraverse. More...
class	Method
	Represents a Method Group To create or edit an instance of this class, use CAM::MethodBuilder Created in NX7.5.0. More...
class	MethodBuilder
	Represents a Method Builder This is an abstract class, and cannot be instantiated. More...
class	MillAreaGeomBuilder
	Represents a MillAreaGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillAreaGeomBuilder Created in NX5.0.0. More...
class	MillBoundaryGeomBuilder
	Represents a MillBoundaryGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillBoundaryGeomBuilder Created in NX5.0.0. More...
class	MillCutParameters
	Represents a CAM::MillCutParameters. More...
class	MillFormToolBuilder
	Represents a MillForm Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillFormToolBuilder Created in NX5.0.0. More...
class	MillGeomBuilder
	Represents a MillGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillGeomBuilder Created in NX5.0.0. More...
class	MillingToolBuilder
	Represents a MillingTool Builder This is an abstract class, and cannot be instantiated. More...
class	MillingTrackpointBuilder
	Represents a Milling Trackpoint Builder Created in NX6.0.0. More...
class	MillMachineControl
	Represents a Mill Machine Control operation To create or edit an instance of this class, use CAM::MillMachineControlBuilder Created in NX7.5.0. More...
class	MillMachineControlBuilder
	Represents a MillMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillMachineControlBuilder Created in NX5.0.0. More...
class	MillMethodBuilder
	Represents a Mill Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillMethodBuilder Created in NX5.0.0. More...
class	MillOperation
	Represents a Mill operation To create or edit an instance of this class, use CAM::MillOperationBuilder Created in NX7.5.0. More...
class	MillOperationBuilder
	Represents a MillOperation Builder This is an abstract class and cannot be instantiated. More...
class	MillOrientGeomBuilder
	Represents a MillOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillOrientGeomBuilder Created in NX5.0.0. More...
class	MillTextGeomBuilder
	Represents a MillTextGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillTextGeomBuilder Created in NX5.0.0. More...
class	MillToolBuilder
	Represents a Mill Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillToolBuilder Created in NX5.0.0. More...
class	MillToolProbing
	Represents a Mill Tool operation To create or edit an instance of this class, use CAM::MillToolProbingBuilder Created in NX8.5.1. More...
class	MillToolProbingBuilder
	Represents a Mill Tool Probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillToolProbingBuilder Created in NX8.5.1. More...
class	MillUserDefined
	Represents a Mill User Defined operation To create or edit an instance of this class, use CAM::MillUserDefinedBuilder Created in NX7.5.0. More...
class	MillUserDefinedBuilder
	Represents a MillUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateMillUserDefinedBuilder Created in NX5.0.0. More...
class	MillVolumeGeomBuilder
	Represents a MillVolumeGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMillVolumeGeomBuilder Created in NX5.0.0. More...
class	MinCutDepth
	Represents a CAM::MinCutDepth. More...
class	MinCutLength
	Represents a CAM::MinCutLength. More...
class	MinCutVolume
	Represents a CAM::MinCutVolume. More...
class	Move
	Represents a Move To obtain an instance of this class use CAM::MoveCollection Created in NX5.0.0. More...
class	MoveBuilder
	Represents Move Builder This cannot be instantiated Created in NX5.0.0. More...
class	MoveCollection
	Represents the move collection To obtain an instance of this class, refer to CAM::Operation Created in NX5.0.0. More...
class	MoveToPointBuilder
	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateMoveToPointBuilder Created in NX5.0.0. More...
class	MultiBladeBaseGeometry
	Represents a selectoin geometry Builder This is an abstract class and cannot be instantiated. More...
class	MultiBladeGeomBuilder
	Represents a MultiBladeGeomBuilder Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateMultiBladeGeometryBuilder Created in NX7.0.0. More...
class	MultiBladeSplittersGeometry
	Represents a selectoin list geometry Builder This is an abstract class and cannot be instantiated. More...
class	MultiDepthCut
	Represents a @link CAM::MultiDepthCut CAM::MultiDepthCut@endlink Created in NX6.0.0. More...
class	MultiplePassesBuilder
	Represents a MultiplePassesBuilder Created in NX6.0.0. More...
class	MultipleStepoverBuilder
	Represents a Builder which holds the data for a set of individual number of passes and stepover distance. More...
class	MultiRamp
	Represents a CAM::MultiRamp. More...
class	NCAssistantBuilder
	Represents a NCAssistant Builder <br> To create a new instance of this class, use @link CAM::CAMSetup::CreateNCAssistantBuilder CAM::CAMSetup::CreateNCAssistantBuilder @endlink <br> Default values. More...
class	NCGroup
	Represents a NC group To obtain an instance of this class us CAM::NCGroupCollection Created in NX4.0.0. More...
class	NCGroupBuilder
	Represents a NCGroup Builder This is an abstract class, and cannot be instantiated. More...
class	NCGroupCollection
	Represents the ncgroup collection To obtain an instance of this class, refer to CAM::CAMSetup Created in NX4.0.0. More...
class	NcmAvoidancePointBuilder
	Represents a CAM::NcmAvoidancePointBuilder. More...
class	NcmClearanceBuilder
	Represents a CAM::NcmClearanceBuilder. More...
class	NcmctPartMountingBuilder
	Represents a CAM::NcmctPartMountingBuilder a "commit" of this object will perform the Part Mounting and no object is returned. More...
class	NcmHoleDrilling
	Represents a CAM::NcmHoleDrilling. More...
class	NcmHoleMachining
	Represents a CAM::NcmHoleMachining. More...
class	NcmHoleMachiningEngRet
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX7.5.0. More...
class	NcmLaserEngage
	Represents Engage settings for laser non cutting moves Created in NX9.0.0. More...
class	NcmLaserRetract
	Represents Retract settings for laser non cutting moves Created in NX9.0.0. More...
class	NcmPlanarBuilder
	Represents a CAM::NcmPlanarBuilder. More...
class	NcmPlanarEngRetBuilder
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0. More...
class	NcmScBuilder
	Represents a CAM::NcmScBuilder. More...
class	NcmScEngRetBuilder
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX5.0.0. More...
class	NcmSmoothingBuilder
	Represents a CAM::NcmSmoothingBuilder. More...
class	NcmSubopBuilder
	Represents a CAM::NcmSubopBuilder. More...
class	NcmTransfer
	Represents a CAM::NcmTransfer. More...
class	NcmTransferBuilder
	Represents a CAM::NcmTransferBuilder. More...
class	NcmTurningBuilder
	Represents a CAM.NcmTurningBuilder Created in NX6.0.0. More...
class	NcmTurnRoughBuilder
	Represents a CAM.NcmTurnRoughBuilder Created in NX6.0.0. More...
class	NcmTurnRoughFinishBuilder
	Represents a CAM.NcmTurnRoughFinishBuilder Created in NX6.0.0. More...
class	NcmTurnThreadBuilder
	Represents a CAM.NcmTurnThreadBuilder Created in NX6.0.0. More...
class	NcmWedmBuilder
	Represents a CAM.NcmWedmBuilder Created in NX7.5.0. More...
class	NormalToToolAxisMoveBuilder
	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateNormalToToolAxisMoveBuilder Created in NX5.0.0. More...
class	Notes
	Represents notes Created in NX9.0.0. More...
class	ObjectNotes
	Represents an Object Notes To create a new instance of this class, use CAM::CAMSetup::CreateObjectNotes Created in NX9.0.0. More...
class	ObjectsFeedsBuilder
	Represents an Object Action Feeds Builder To create a new instance of this class, use CAM::CAMSetup::CreateFeedsBuilder Created in NX6.0.0. More...
class	ObjectsUdeSet
	Represents an Object Action Ude Set Builder To create a new instance of this class, use CAM::CAMSetup::CreateObjectsUdeSet Created in NX6.0.0. More...
class	OffsetDataBuilder
	Represents the Offset Point Data Builder Created in NX6.0.0. More...
class	Operation
	Represents an operation To create or edit an instance of this class, use CAM::OperationBuilder Created in NX4.0.0. More...
class	OperationBuilder
	Represents a Opr Builder This is an abstract class, and cannot be instantiated. More...
class	OperationCollection
	Represents the operation collection To obtain an instance of this class, refer to CAM::CAMSetup Created in NX4.0.0. More...
class	OperationDisplayOptionsBuilder
	Represents a display options Builder This is an abstract class and cannot be instantiated. More...
class	OperationTeaching
	Represents a OperationTeaching Builder To create a new instance of this class, use CAM::CAMSetup::CreateOperationTeaching Created in NX8.0.0. More...
class	OperationTransformBuilder
	OperationTransformBuilder To create a new instance of this class, use CAM::CAMSetup::CreateOperationTransformBuilder Created in NX6.0.0. More...
class	OppositeDirection
	Represents OppositeDirection Created in NX8.5.0. More...
class	OptimizeTraverseGroupBuilder
	Represents a OptimizeTraverseGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateOptimizeTraverseGroupBuilder Created in NX5.0.0. More...
class	OrientGeomBuilder
	Represents a OrientGeom Builder This is an abstract class, and cannot be instantiated. More...
class	OrientGeometry
	Represents a Orient Group To create or edit an instance of this class, use CAM::OrientGeomBuilder Created in NX7.5.0. More...
class	OutputUncutRegions
	Represents a CAM::OutputUncutRegions. More...
class	ParamBuilder
	Represents a manufacturing object builder. More...
class	PartAxisBuilder
	Represents a part axis builder. More...
class	PathDisplayColors
	Represents a path display colors Builder This is an abstract class and cannot be instantiated. More...
class	PitchSetting
	Represents a CAM::PitchSetting. More...
class	PlanarMilling
	Represents a Planar Milling Operation To create or edit an instance of this class, use CAM::PlanarMillingBuilder Created in NX7.5.0. More...
class	PlanarMillingBuilder
	Represents a PlanarMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreatePlanarMillingBuilder Created in NX5.0.0. More...
class	PlanarOperation
	Represents a Planar operation To create or edit an instance of this class, use CAM::PlanarOperationBuilder Created in NX7.5.0. More...
class	PlanarOperationBuilder
	Represents a PlanarOperation Builder This is an abstract class and cannot be instantiated. More...
class	PlungeMilling
	Represents a Plunge Milling Operation To create or edit an instance of this class, use CAM::PlungeMillingBuilder Created in NX7.5.0. More...
class	PlungeMillingBuilder
	Represents a PlungeMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreatePlungeMillingBuilder Created in NX5.0.0. More...
class	PmopToolAxisCiBuilder
	Represents a PmopToolAxisCiBuilder This is an abstract class, and cannot be instantiated. More...
class	PointToPointBuilder
	Represents a Point to Point Builder (Drilling) To create a new instance of this class, use CAM::OperationCollection::CreatePointToPointBuilder Created in NX5.0.0. More...
class	PostEventsCiBuilder
	Represents a PostEventsCiBuilder Created in NX5.0.1. More...
class	Preferences
	Represents a cam preferences Builder To create a new instance of this class, use CAM::CAMSession::CreateCamPreferences Created in NX7.5.0. More...
class	PreprocessGeometryBuilder
	Represents a Preprocess Geometry Builder To create a new instance of this class, use CAM::CAMSetup::CreatePreprocessGeometryBuilder Created in NX6.0.0. More...
class	ProbeCalibrateLengthMoveBuilder
	Represents the Probe Calibrate Length Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateLengthMoveBuilder Created in NX5.0.0. More...
class	ProbeCalibrateSphereMoveBuilder
	Represents the Probe Calibrate Sphere Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateSphereMoveBuilder Created in NX5.0.0. More...
class	ProbeCalibrateStylusMoveBuilder
	Represents the Probe Calibrate Stylus Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeCalibrateStylusMoveBuilder Created in NX5.0.0. More...
class	ProbeClearanceMoveBuilder
	Represents the Probe Clearance Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeClearanceMoveBuilder Created in NX5.0.0. More...
class	ProbeControlParametersBuilder
	Represents a CAM::ProbeControlParametersBuilder. More...
class	ProbeInspectBorebossMoveBuilder
	Represents the Probe Inspect Bore Boss Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectBorebossMoveBuilder Created in NX5.0.0. More...
class	ProbeInspectPointMoveBuilder
	Represents the Probe Inspect Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectPointMoveBuilder Created in NX5.0.0. More...
class	ProbeInspectSurfacePointMoveBuilder
	Represents the Probe Inspect Surface Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateProbeInspectSurfacePointMoveBuilder Created in NX5.0.0. More...
class	ProbeParamsBuilder
	Represents the Probe Params Builder This builder cannot be instantiated separately. More...
class	ProbeProtectedParametersBuilder
	Represents the Probe Protected Parameters Builder Created in NX5.0.0. More...
class	ProbeStockParametersBuilder
	Represents the Probe Stock Parameters Builder Created in NX5.0.0. More...
class	ProbeToleranceParametersBuilder
	Represents a CAM::ProbeToleranceParametersBuilder. More...
class	ProbeToolBuilder
	Represents a Probe Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateProbeToolBuilder Created in NX5.0.0. More...
class	ProbeTrackingBuilder
	Represents a ProbeTracking Builder To create a new instance of this class, use CAM::Tool::CreateProbeTrackingBuilder Created in NX5.0.0. More...
class	ProbeTrackPoint
	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0. More...
class	ProfileStrategy
	Represents profile strategy Created in NX6.0.0. More...
class	ProgramOrderGroupBuilder
	Represents a ProgramOrderGroup Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateProgramOrderGroupBuilder Created in NX5.0.0. More...
class	ProjVecCiBuilder
	Represents a tool axis ci Builder Created in NX5.0.0. More...
class	RampingMode
	Represents a ramping mode Builder Created in NX6.0.0. More...
class	ReliefCut
	Represents the relief cut Created in NX7.5.0. More...
class	ReliefPlunge
	Represents a CAM::ReliefPlunge. More...
class	RotaryFinishGeomBuilder
	Represents a rotary finish geometry builder. More...
class	RotaryPointMoveBuilder
	represents the Rotary Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotaryPointMoveBuilder Created in NX5.0.0. More...
class	RotaryPolarMoveBuilder
	Represents the Rotary Polar Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotaryPolarMoveBuilder Created in NX5.0.0. More...
class	RotateToolMoveBuilder
	Represents the Rotate Tool Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateRotateToolMoveBuilder Created in NX5.0.0. More...
class	RoughFinishTurning
	Represents a Turn Rough Finish operation To create or edit an instance of this class, use CAM::RoughFinishTurningBuilder Created in NX7.5.0. More...
class	RoughFinishTurningBuilder
	Represents a RoughFinishTurning Builder This is an abstract class and cannot be instantiated. More...
class	RoughTurning
	Represents a Turn Rough operation To create or edit an instance of this class, use CAM::RoughTurningBuilder Created in NX7.5.0. More...
class	RoughTurningBuilder
	Represents a RoughTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateRoughTurningBuilder Created in NX6.0.0. More...
class	RoundPointBuilder
	Represents the round Point Builder Created in NX5.0.0. More...
class	SelectCAMFeature
	Represents a single object selection. More...
class	SelectCAMFeatureList
	Represents a list of objects on a selection list. More...
class	Sequence
	Represents Sequence Builder Created in NX7.5.0. More...
class	SmallAreaAvoidance
	Represents a SmallArea Builder Created in NX6.0.0. More...
class	SoftTool
	Represents a SoftTool This is an abstract class, and cannot be instantiated. More...
class	SolidToolBuilder
	Represents a SolidTool Builder This is an abstract class, and cannot be instantiated. More...
class	SolidTrackingBuilder
	Represents a SolidTracking Builder To create a new instance of this class, use CAM::Tool::CreateSolidTrackingBuilder Created in NX5.0.0. More...
class	SolidTrackPoint
	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0. More...
class	Splitter
	Represents a Splitter Builder To create a new instance of this class, use CAM::MultiBladeSplittersGeometry::CreateSplitter Created in NX7.0.0. More...
class	SplitterList
	Represents a list of objects. More...
class	SpringPasses
	Represents a spring passes Created in NX6.0.0. More...
class	SpunOutlineGeom
	Represents a spun outline geometry object for turning boundary Created in NX8.0.0. More...
class	SteepContainment
	Represents a CAM::SteepContainment. More...
class	StepoverBuilder
	Represents a Stepover Builder Created in NX6.0.0. More...
class	StepParamsBuilder
	Represents a StepParams Builder Created in NX5.0.0. More...
class	StepUpBuilder
	Represents a StepUp Builder Created in NX6.0.0. More...
class	StockPerPassBuilder
	Represents a Builder which holds the data for a set of individual stock per pass. More...
class	StopPosition
	Represents a stop position Created in NX6.0.0. More...
class	SurfaceContour
	Represents a Surface Contour operation To create or edit an instance of this class, use CAM::SurfaceContourBuilder Created in NX7.5.0. More...
class	SurfaceContourBuilder
	Represents a SurfaceContour Builder To create a new instance of this class, use CAM::OperationCollection::CreateSurfaceContourBuilder Created in NX5.0.0. More...
class	SurfaceDriveGeometry
	Represents a CAM drive geometry object for surface area Created in NX8.0.0. More...
class	SurfaceDriveGeometrySet
	Represents a geometry set for a CAM object. More...
class	SurfaceDriveGeometrySetList
	Represents a list of objects. More...
class	SurfaceRegions
	Represents a Surface Regions Builder To create a new instance of this class, use CAM::CAMSetup::CreateSurfaceRegions Created in NX8.0.0. More...
class	TabPointDataBuilder
	Represents a Tab Point Builder To create a new instance of this class, use CAM::WedmCustomBoundaryDataBuilder::CreateTabPointDataBuilder Created in NX5.0.0. More...
class	TabPointDataBuilderList
	Represents a list of objects. More...
class	TeachmodeEngageSettingsBuilder
	Represents a TeachmodeEngageSettingsBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0. More...
class	TeachmodeLinearMoveBuilder
	Represents a TeachmodeLinearMove To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0. More...
class	TeachmodeProfileMoveBuilder
	Represents a TeachmodeProfileMoveBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0. More...
class	TeachmodeRetractSettingsBuilder
	Represents a TeachmodeRetractSettings builder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0. More...
class	TeachmodeTurning
	Represents a Turning Teachmode operation To create or edit an instance of this class, use CAM::TeachmodeTurningBuilder Created in NX7.5.0. More...
class	TeachmodeTurningBuilder
	Represents a TeachmodeTurningBuilder To create a new instance of this class, use CAM::OperationCollection::CreateTeachmodeTurningBuilder Created in NX7.5.0. More...
class	ThreadCutParameters
	Represents a CAM::ThreadCutParameters. More...
class	ThreadedBossSet
	Represents a thread boss Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateThreadedBossBuilder Created in NX7.5.0. More...
class	ThreadedBossSetList
	Represents a list of objects. More...
class	ThreadedHoleSet
	Represents a Cut Area Geometry builder To create a new instance of this class, use CAM::HoleBossGeom::CreateThreadedHoleBuilder Created in NX7.5.0. More...
class	ThreadedHoleSetList
	Represents a list of objects. More...
class	ThreadMilling
	Represents a Thread Milling Operation To create or edit an instance of this class, use CAM::ThreadMillingBuilder Created in NX7.5.0. More...
class	ThreadMillingBuilder
	Represents a ThreadMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateThreadMillingBuilder Created in NX7.5.0. More...
class	ThreadMillingCutParameters
	Represents a ThreadMillingCutParameters Builder Created in NX7.5.0. More...
class	ThreadToolBuilder
	Represents a Thread tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateThreadToolBuilder Created in NX5.0.0. More...
class	ThreadTurning
	Represents a Thread Turning operation To create or edit an instance of this class, use CAM::ThreadTurningBuilder Created in NX7.5.0. More...
class	ThreadTurningBuilder
	Represents a ThreadTurning Builder To create a new instance of this class, use CAM::OperationCollection::CreateThreadTurningBuilder Created in NX6.0.0. More...
class	Tool
	Represents a NC group To obtain an instance of this class use CAM::NCGroupCollection Created in NX5.0.0. More...
class	ToolAxisAdvanced
	Represents a Tool Axis Advanced Builder Created in NX7.0.0. More...
class	ToolAxisBase
	Represents a tool axis ci Builder Created in NX7.5.0. More...
class	ToolAxisChange
	Represents a CAM::ToolAxisChange. More...
class	ToolAxisCiBuilder
	Represents a tool axis ci Builder Created in NX5.0.0. More...
class	ToolAxisFixed
	Represents a Tool Axis Fixed Builder Created in NX7.5.0. More...
class	ToolAxisInterpolate
	Represents a Tool Axis Interpolate Builder Created in NX7.5.0. More...
class	ToolAxisTilt
	Represents a builder for an inheritable double value in of a CAM.CAMObject Created in NX6.0.0. More...
class	ToolAxisVariable
	Represents a Tool Axis Variable Builder Created in NX7.5.0. More...
class	ToolBuilder
	Represents a Tool Builder This is an abstract class, and cannot be instantiated. More...
class	ToolChangeCiBuilder
	Represents a ToolChangeCiBuilder Created in NX5.0.0. More...
class	ToolPathDivideBuilder
	Represents a Tool Path Divide Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathDivideBuilder Created in NX5.0.0. More...
class	ToolPathEditorBuilder
	Represents a Tool Path Editor Builder <br> To create a new instance of this class, use @link CAM::Operation::CreateToolPathEditorBuilder CAM::Operation::CreateToolPathEditorBuilder @endlink <br> Default values. More...
class	ToolPathSplitBuilder
	Represents a Tool Path Split Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathSplitBuilder Created in NX6.0.0. More...
class	ToolPathSplitItemBuilder
	Represents a ToolPathSplitItem builder Use the ToolPathSplitBuilder class to create a ToolPathSplitItemBuilder object. More...
class	ToolPathSplitItemBuilderList
	Represents a list of objects. More...
class	ToolPathSplitParametersBuilder
	Represents the Divide Parameters This object is owned by another builder. More...
class	ToolPathTiltAvoidance
	Represents a Tool Path Tilt Avoidance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0. More...
class	ToolPathTiltBuilder
	Represents a Tool Path Tilt Builder To create a new instance of this class, use CAM::CAMSetup::CreateToolPathTiltBuilder Created in NX7.5.2. More...
class	ToolPathTiltClearance
	Represents a Tool Path Tilt Clearance Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0. More...
class	ToolPathTiltMachine
	Represents a Tool Path Tilt Machine Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0. More...
class	ToolPathTiltTilting
	Represents a Tool Path Tilt Tilting Builder This is a sub-builder class and cannot be directly instantiated Created in NX9.0.0. More...
class	ToolPositioningBuilder
	Represents the Tool Positioning Builder Created in NX8.0.0. More...
class	ToolTrackingPointBuilder
	Represents the Tool Tracking Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateToolTrackingPointBuilder Created in NX8.5.1. More...
class	Topology
	Represents a CAM topology builder Use the CAM::Geometry class to get a topology builder Created in NX8.0.0. More...
class	TrackingBuilder
	Represents a Tracking Builder Created in NX5.0.0. More...
class	TrackPoint
	Represents an Track Point To obtain an instance of this class us CAM::TrackPointCollection Created in NX4.0.0. More...
class	TrackpointBuilder
	Represents a Trackpoint Builder This is an abstract class and can not be instantiated Created in NX5.0.0. More...
class	TrackPointCollection
	Represents the track point collection To obtain an instance of this class, refer to CAM::Tool Created in NX5.0.0. More...
class	TrimPlane
	Represents Trim Plane Created in NX6.0.0. More...
class	TrimPoint
	Represents trim point Created in NX6.0.0. More...
class	TrochoidalSettings
	Represents a @link CAM::TrochoidalSettings CAM::TrochoidalSettings@endlink Created in NX6.0.0. More...
class	TToolBuilder
	Represents a T Tool Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTToolBuilder Created in NX5.0.0. More...
class	TurnAvoidanceApproachBuilder
	Represents an avoidance start of engage Builder Created in NX6.0.0. More...
class	TurnAvoidanceClearanceBuilder
	Represents an avoidance start of engage Builder Created in NX6.0.0. More...
class	TurnAvoidanceDepartureBuilder
	Represents an avoidance start of engage Builder Created in NX6.0.0. More...
class	TurnAvoidanceFromBuilder
	Represents an avoidance from Builder Created in NX6.0.0. More...
class	TurnAvoidanceGeomBuilder
	Represents a TurnAvoidanceGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnAvoidanceGeomBuilder Created in NX5.0.0. More...
class	TurnAvoidanceGohomeBuilder
	Represents an avoidance return Builder Created in NX6.0.0. More...
class	TurnAvoidancePathPointsBuilder
	Represents a turn avoidance path points builder Created in NX6.0.0. More...
class	TurnAvoidanceReturnBuilder
	Represents an avoidance return Builder Created in NX6.0.0. More...
class	TurnAvoidanceStartBuilder
	Represents an avoidance start Builder Created in NX6.0.0. More...
class	TurnAvoidanceStartOfEngageBuilder
	Represents an avoidance start of engage Builder Created in NX6.0.0. More...
class	TurnBoundaryGeomBuilder
	Represents a TurnBoundaryGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnBoundaryGeomBuilder Created in NX5.0.0. More...
class	TurnConcaveCornerControl
	Represents a concave corner ja Created in NX6.0.2. More...
class	TurnCornerControl
	Represents a first plunge ja Created in NX6.0.0. More...
class	TurnCutParameters
	Represents a CAM::TurnCutParameters. More...
class	TurnCutterClearance
	Represents a CAM::TurnCutterClearance. More...
class	TurnDirection
	Represents a direction Created in NX6.0.0. More...
class	TurnEngageRetractBuilder
	Represents a first plunge Builder Created in NX6.0.0. More...
class	TurnFeatureGeomBuilder
	Represents a TurnFeatureGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnFeatureGeomBuilder Created in NX5.0.0. More...
class	TurnGeomBuilder
	Represents a TurnGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnGeomBuilder Created in NX5.0.0. More...
class	TurnGrooveCornerControl
	Represents a groove corner control ja Created in NX9.0.0. More...
class	TurningOperation
	Represents a Turning operation To create or edit an instance of this class, use CAM::TurningOperationBuilder Created in NX7.5.0. More...
class	TurningOperationBuilder
	Represents a Turning Operation Builder This is an abstract class and cannot be instantiated. More...
class	TurningToolBuilder
	Represents a Turning tool builder This is an abstract class, and cannot be instantiated. More...
class	TurnMethodBuilder
	Represents a Turn Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnMethodBuilder Created in NX5.0.0. More...
class	TurnMoveToPointBuilder
	Represents the Move To Point Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnMoveToPointBuilder Created in NX8.5.1. More...
class	TurnOrientGeomBuilder
	Represents a TurnOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnOrientGeomBuilder Created in NX5.0.0. More...
class	TurnOrientWcs
	Represents an Turn Orient Wcs Builder This is an abstract class, and cannot be instantiated. More...
class	TurnOverlap
	Represents a CAM::TurnOverlap. More...
class	TurnPartProbing
	Represents a Turn Part Probing operation To create or edit an instance of this class, use CAM::TurnPartProbingBuilder Created in NX8.5.1. More...
class	TurnPartProbingBuilder
	Represents a Turn Part Probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateTurnPartProbingBuilder Created in NX8.5.1. More...
class	TurnProbeClearanceBuilder
	Represents an probe start of engage Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnProbeClearanceBuilder Created in NX8.5.1. More...
class	TurnProbeInspectPointMoveBuilder
	Represents the Turn Probe Inspect Point Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateTurnProbeInspectPointMoveBuilder Created in NX8.5.1. More...
class	TurnRoughFinishLocalReturnBuilder
	Represents an avoidance start Builder Created in NX6.0.0. More...
class	TurnRoughFinishTestCut
	Represents a test cut builder Created in NX8.0.0. More...
class	TurnRoughVariableIncrementBuilder
	Represents a Variable Increment Builder Created in NX6.0.0. More...
class	TurnStock
	Represents a CAM::TurnStock. More...
class	TurnThreadEngageRetractBuilder
	Represents a Thread Turning Engage or Retract Builder Created in NX6.0.0. More...
class	TurnThreadFinishPassesBuilder
	Represents a TurnThreadFinishPasses Builder Created in NX6.0.0. More...
class	TurnToolBuilder
	Represents a Turn tool builder To create a new instance of this class, use CAM::NCGroupCollection::CreateTurnToolBuilder Created in NX5.0.0. More...
class	TurnToolProbing
	Represents a Turn tool operation To create or edit an instance of this class, use CAM::TurnToolProbingBuilder Created in NX8.5.1. More...
class	TurnToolProbingBuilder
	Represents a Turn tool probing Builder To create a new instance of this class, use CAM::OperationCollection::CreateTurnToolProbingBuilder Created in NX8.5.1. More...
class	Ude
	Represets a User Defined Event To create a new instance of this class, use CAM::UdeSet::CreateUde Created in NX7.0.0. More...
class	UdeList
	Represents a list of objects. More...
class	UdeMoveBuilder
	Represents the Ude Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateUdeMoveBuilder Created in NX5.0.0. More...
class	UdeParameter
	Represents a User Defined Event Parameter Created in NX7.5.0. More...
class	UdeSet
	Represets a set of User Defined Events Created in NX7.5.0. More...
class	UdtSectionBuilder
	Represents a UdtSection Builder Created in NX5.0.0. More...
class	UpDownCutting
	Represents a CAM::UpDownCutting. More...
class	UserDefinedMoveBuilder
	Represents the User Defined Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateUserDefinedMoveBuilder Created in NX8.0.0. More...
class	UserDefinedOpr
	Represents a User Defined operation To create or edit an instance of this class, use CAM::UserDefinedOprBuilder Created in NX7.5.0. More...
class	UserDefinedOprBuilder
	Represents a UserDefinedOpr Builder This is an abstract class, and cannot be instantiated. More...
class	VariableZLevelMilling
	Represents a Variable Z Level Milling Operation To create or edit an instance of this class, use CAM::VazlMillingBuilder Created in NX7.5.0. More...
class	VazlMillingBuilder
	Represents a VazlMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateVazlMillingBuilder Created in NX5.0.0. More...
class	VectorDistanceMoveBuilder
	Represents the Vector Distance Move Builder To create a new instance of this class, use CAM::MoveCollection::CreateVectorDistanceMoveBuilder Created in NX5.0.0. More...
class	VerticalPosition
	Represents a VerticalPosition Builder Created in NX7.5.0. More...
class	VolumeBased25DMillingOperation
	Represents a Floor Wall Milling Operation To create or edit an instance of this class, use CAM::VolumeBased25DMillingOperationBuilder Created in NX8.5.0. More...
class	VolumeBased25DMillingOperationBuilder
	Represents a VolumeBased25DMillingOperation Builder To create a new instance of this class, use CAM::OperationCollection::CreateVolumeBased25dMillingOperationBuilder Created in NX8.5.0. More...
class	WedmArcOutputTypeCiBuilder
	Represents a WedmArcOutputTypeCiBuilder Created in NX7.5.0. More...
class	WedmBasedGeomBuilder
	Represents a WedmBasedGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmBasedGeomBuilder Created in NX5.0.0. More...
class	WedmCornerControlBuilder
	Represents a WedmCornerControl Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmCornerControlBuilder Created in NX6.0.0. More...
class	WedmCustomBoundaryDataBuilder
	Represents a WedmCustomBoundaryData Builder No Creator Created in NX6.0.0. More...
class	WedmCustomBoundaryDataBuilderList
	Represents a list of objects. More...
class	WedmCutOrderBuilder
	Represents a CAM::WedmCutOrderBuilder This builder cannot be instantiated separately. More...
class	WedmCutParameters
	Represents a CAM::WedmCutParameters. More...
class	WedmCuttingBuilder
	Represents a WedmCutting Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmCuttingBuilder Created in NX6.0.0. More...
class	WedmExtGeomBuilder
	Represents a WedmExtGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmExtGeomBuilder Created in NX5.0.0. More...
class	WedmFeatureGeomBuilder
	Represents a WedmFeatureGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmFeatureGeomBuilder Created in NX5.0.0. More...
class	WedmGeomBuilder
	Represents a WedmGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmGeomBuilder Created in NX7.5.0. More...
class	WedmIntGeomBuilder
	Represents a WedmIntGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmIntGeomBuilder Created in NX5.0.0. More...
class	WedmLeadInOutBuilder
	Represents a WedmLeadInOut Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmLeadInOutBuilder Created in NX6.0.0. More...
class	WedmMachineControl
	Represents a WEDM Machine Control operation To create or edit an instance of this class, use CAM::WedmMachineControlBuilder Created in NX7.5.0. More...
class	WedmMachineControlBuilder
	Represents a WedmMachineControl Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmMachineControlBuilder Created in NX5.0.0. More...
class	WedmMethodBuilder
	Represents a Wedm Method Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmMethodBuilder Created in NX5.0.0. More...
class	WedmMoveControlBuilder
	Represents a WedmMoveControl Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmMoveControlBuilder Created in NX6.0.0. More...
class	WedmNocoreGeomBuilder
	Represents a WedmNocoreGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmNocoreGeomBuilder Created in NX5.0.0. More...
class	WedmOpenGeomBuilder
	Represents a WedmOpenGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmOpenGeomBuilder Created in NX5.0.0. More...
class	WedmOperationBuilder
	Represents a WedmOperation Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmOperationBuilder Created in NX7.5.0. More...
class	WedmOrientGeomBuilder
	Represents a WedmOrientGeom Builder To create a new instance of this class, use CAM::NCGroupCollection::CreateWedmOrientGeomBuilder Created in NX5.0.0. More...
class	WedmPointDefinitionBuilder
	Represents a CAM::WedmPointDefinitionBuilder This builder cannot be instantiated separately. More...
class	WedmStatusControlCiBuilder
	Represents a WedmStatusControlCiBuilder Created in NX7.5.0. More...
class	WedmStepoverBuilder
	Represents a CAM::WedmStepoverBuilder. More...
class	WedmUserDefined
	Represents a User Defined WEDM operation To create or edit an instance of this class, use CAM::WedmUserDefinedBuilder Created in NX7.5.0. More...
class	WedmUserDefinedBuilder
	Represents a WedmUserDefined Builder To create a new instance of this class, use CAM::OperationCollection::CreateWedmUserDefinedBuilder Created in NX5.0.0. More...
class	WireGuide
	Represents a wire guide object To create a new instance of this class, use CAM::WireTool::CreateWireGuide Created in NX9.0.0. More...
class	WireGuideList
	Represents a list of objects. More...
class	WireTool
	Represents a Wire Tool To create a new instance of this class, use CAM::NCGroupCollection::CreateWireTool Created in NX9.0.0. More...
class	ZAxisSmoothing
	Represents a @link CAM::ZAxisSmoothing CAM::ZAxisSmoothing@endlink Created in NX7.5.0. More...
class	ZLevelMilling
	Represents a Z Level Milling Operation To create or edit an instance of this class, use CAM::ZLevelMillingBuilder Created in NX7.5.0. More...
class	ZLevelMillingBuilder
	Represents a ZLevelMilling Builder To create a new instance of this class, use CAM::OperationCollection::CreateZlevelMillingBuilder Created in NX5.0.0. More...

Enumerations
enum	CamInspectionOperationCsysreferencetypes { CamInspectionOperationCsysreferencetypesRelativetoPCS, CamInspectionOperationCsysreferencetypesAbsolute }
	Coordinate system that the inspection feature data is relative to. More...
enum	CamInspectionOperationExtenttypes { CamInspectionOperationExtenttypesBounded, CamInspectionOperationExtenttypesUnbounded }
	Specifies whether the feature extent is bounded or unbounded. More...
enum	CamInspectionOperationFeaturetypes {   CamInspectionOperationFeaturetypesNone = -1, CamInspectionOperationFeaturetypesArc, CamInspectionOperationFeaturetypesCircle, CamInspectionOperationFeaturetypesPoint,   CamInspectionOperationFeaturetypesSphere, CamInspectionOperationFeaturetypesSurface, CamInspectionOperationFeaturetypesPattern, CamInspectionOperationFeaturetypesCurve,   CamInspectionOperationFeaturetypesCylinder, CamInspectionOperationFeaturetypesCone, CamInspectionOperationFeaturetypesPlane, CamInspectionOperationFeaturetypesLine,   CamInspectionOperationFeaturetypesCparln, CamInspectionOperationFeaturetypesSlotTab, CamInspectionOperationFeaturetypesSurfaceOfRevolution, CamInspectionOperationFeaturetypesTorus }
	Specifies the type of an inspection feature. More...
enum	CamInspectionOperationInneroutertypes { CamInspectionOperationInneroutertypesInner, CamInspectionOperationInneroutertypesOuter }
	Directionality of feature surface. More...
enum	CutParametersActionWhenGougingTypes { CutParametersActionWhenGougingTypesWarning, CutParametersActionWhenGougingTypesSkip, CutParametersActionWhenGougingTypesRetract, CutParametersActionWhenGougingTypesTilt }
	Available types for actions when gouging. More...
enum	CutParametersAdjacentBladesTypes { CutParametersAdjacentBladesTypesUseBladeStock, CutParametersAdjacentBladesTypesUseCheckStock }
	Available types for Adjacent Blades Option Created in NX8.5.0. More...
enum	CutParametersCleanupControlTypes { CutParametersCleanupControlTypesFollowShoulder, CutParametersCleanupControlTypesCutToShoulder }
	Available types for cleanup control Created in NX6.0.0. More...
enum	CutParametersCornerFindingTypes { CutParametersCornerFindingTypesWithinCutArea, CutParametersCornerFindingTypesIncludeAdjacentPart }
	Available types for Finding Corner Options Created in NX7.5.0. More...
enum	CutParametersCutConnectionTypes { CutParametersCutConnectionTypesTraverse, CutParametersCutConnectionTypesContinuousCuts }
	Available types for cut connection Created in NX6.0.0. More...
enum	CutParametersCutOrderTypes { CutParametersCutOrderTypesLevelFirst, CutParametersCutOrderTypesDepthFirst, CutParametersCutOrderTypesDepthFirstAlways }
	Available types for cut order. More...
enum	CutParametersExtendAtStartMode { CutParametersExtendAtStartModeNone, CutParametersExtendAtStartModeToContainmentGeometry, CutParametersExtendAtStartModeIncludeAdjacentChamfersOrRounds }
	Available modes for Turning Cutting Corners Extend At Start Created in NX8.5.0. More...
enum	CutParametersExtendFloorTypes { CutParametersExtendFloorTypesNone, CutParametersExtendFloorTypesPartOutline, CutParametersExtendFloorTypesBlankOutline }
	extend floor to options Created in NX8.0.0. More...
enum	CutParametersFilletsTypes { CutParametersFilletsTypesAddIntoFaces, CutParametersFilletsTypesAddIntoDiameters, CutParametersFilletsTypesSplit, CutParametersFilletsTypesOmit }
	Available types for fillets Created in NX6.0.0. More...
enum	CutParametersFinishPassesTypes { CutParametersFinishPassesTypesMaintain, CutParametersFinishPassesTypesAlternate }
	Available types for finish passes Created in NX6.0.0. More...
enum	CutParametersIpwTypes {   CutParametersIpwTypesThickness, CutParametersIpwTypesNone, CutParametersIpwTypesThreeDimension, CutParametersIpwTypesLevelBased,   CutParametersIpwTypesTwoDimension, CutParametersIpwTypesUseReferenceTool, CutParametersIpwTypesLocal }
	Available types for IPW. More...
enum	CutParametersPatternDirectionTypes { CutParametersPatternDirectionTypesOutward, CutParametersPatternDirectionTypesInward }
	Available types for pattern direction. More...
enum	CutParametersPlungeDirectionTypes { CutParametersPlungeDirectionTypesCutDown, CutParametersPlungeDirectionTypesUpAndDown }
	Available types for plunge direction. More...
enum	CutParametersProfileCutRegionsTypes { CutParametersProfileCutRegionsTypesAutomaticDetection, CutParametersProfileCutRegionsTypesSameAsRoughing }
	Available types for profile Created in NX6.0.0. More...
enum	CutParametersRegionSequencingTypes { CutParametersRegionSequencingTypesStandard, CutParametersRegionSequencingTypesOptimize, CutParametersRegionSequencingTypesRegionPoints, CutParametersRegionSequencingTypesPredrillPoints }
	Available types for region resequencing method. More...
enum	CutParametersSimplifyShapesTypes { CutParametersSimplifyShapesTypesNone, CutParametersSimplifyShapesTypesConvexHull, CutParametersSimplifyShapesTypesMinimumBox }
	Available types for simplify shapes method. More...
enum	CutParametersToolRunOffTypes { CutParametersToolRunOffTypesExtendToRegion, CutParametersToolRunOffTypesSpecify }
	Available types for Tool Run Off Options Created in NX8.0.0. More...
enum	CutParametersTraverseOpenPassesTypes { CutParametersTraverseOpenPassesTypesZig, CutParametersTraverseOpenPassesTypesZigZag }
	Available types for traverse open passes. More...
enum	CutParametersTrimControlTypes { CutParametersTrimControlTypesNone, CutParametersTrimControlTypesSilhoutte, CutParametersTrimControlTypesExteriorEdges }
	Available types for trim control method. More...
enum	FeedRapidOutputMode { FeedRapidOutputModeG0, FeedRapidOutputModeG1 }
	The type for rapid feed output mode Created in NX8.0.0. More...
enum	FeedRateUnit {   FeedRateUnitNone, FeedRateUnitPerMinute, FeedRateUnitPerRevolution, FeedRateUnitRapid,   FeedRateUnitCutPercent }
	The unit of feed rate (please cf. More...
enum	Inheritance { InheritanceNo, InheritanceYes }
	The inheritance setting for enum component within status components Created in NX5.0.0. More...
enum	ParamValueIntent { ParamValueIntentPartUnits, ParamValueIntentToolDep }
	The source of values for design logic enum component within status components Created in NX5.0.0. More...

Detailed Description

Provides classes and interfaces for Manufacturing.

Enumeration Type Documentation

enum NXOpen::CAM::CamInspectionOperationCsysreferencetypes

Coordinate system that the inspection feature data is relative to.

Enumerator:

CamInspectionOperationCsysreferencetypesRelativetoPCS	Relative to Part Coordinate System.
CamInspectionOperationCsysreferencetypesAbsolute	Relative to Absolute Coordinate System.

enum NXOpen::CAM::CamInspectionOperationExtenttypes

Specifies whether the feature extent is bounded or unbounded.

Enumerator:

CamInspectionOperationExtenttypesBounded	Feature extent has bounds.
CamInspectionOperationExtenttypesUnbounded	Feature extent is infinite.

enum NXOpen::CAM::CamInspectionOperationFeaturetypes

Specifies the type of an inspection feature.

Enumerator:

CamInspectionOperationFeaturetypesArc	Arc.
CamInspectionOperationFeaturetypesCircle	Circle.
CamInspectionOperationFeaturetypesPoint	Point.
CamInspectionOperationFeaturetypesSphere	Sphere.
CamInspectionOperationFeaturetypesSurface	Surface.
CamInspectionOperationFeaturetypesPattern	Pattern.
CamInspectionOperationFeaturetypesCurve	Curve.
CamInspectionOperationFeaturetypesCylinder	Cylinder.
CamInspectionOperationFeaturetypesCone	Cone.
CamInspectionOperationFeaturetypesPlane	Plane.
CamInspectionOperationFeaturetypesLine	Line.
CamInspectionOperationFeaturetypesCparln	Closed Parallel Line bounded slot.
CamInspectionOperationFeaturetypesSlotTab	Slot or Tab.
CamInspectionOperationFeaturetypesSurfaceOfRevolution	Surface of Revolution.
CamInspectionOperationFeaturetypesTorus	Torus.

enum NXOpen::CAM::CamInspectionOperationInneroutertypes

Directionality of feature surface.

Enumerator:

CamInspectionOperationInneroutertypesInner	Feature with surface normal pointing inward (hole)
CamInspectionOperationInneroutertypesOuter	Feature with surface normal pointing outward (pin)

enum NXOpen::CAM::CutParametersActionWhenGougingTypes

Available types for actions when gouging.

Enumerator:

CutParametersActionWhenGougingTypesWarning	Warning.
CutParametersActionWhenGougingTypesSkip	Skip.
CutParametersActionWhenGougingTypesRetract	Retract.
CutParametersActionWhenGougingTypesTilt	Tilt.

enum NXOpen::CAM::CutParametersAdjacentBladesTypes

Available types for Adjacent Blades Option
Created in NX8.5.0.

Enumerator:

CutParametersAdjacentBladesTypesUseBladeStock	Use Blade Stock.
CutParametersAdjacentBladesTypesUseCheckStock	Use Check Stock.

enum NXOpen::CAM::CutParametersCleanupControlTypes

Available types for cleanup control
Created in NX6.0.0.

Enumerator:

CutParametersCleanupControlTypesFollowShoulder	Cleanup control: Follow Shoulder.
CutParametersCleanupControlTypesCutToShoulder	Cleanup control: Cut to Shoulder.

enum NXOpen::CAM::CutParametersCornerFindingTypes

Available types for Finding Corner Options
Created in NX7.5.0.

Enumerator:

CutParametersCornerFindingTypesWithinCutArea	Within Cut Area.
CutParametersCornerFindingTypesIncludeAdjacentPart	Inlcude Adjacent Part.

enum NXOpen::CAM::CutParametersCutConnectionTypes

Available types for cut connection
Created in NX6.0.0.

Enumerator:

CutParametersCutConnectionTypesTraverse	Cut connection: Traverse.
CutParametersCutConnectionTypesContinuousCuts	Cut connection: Continuous Cuts.

enum NXOpen::CAM::CutParametersCutOrderTypes

Available types for cut order.

Enumerator:

CutParametersCutOrderTypesLevelFirst	level first type
CutParametersCutOrderTypesDepthFirst	depth first type
CutParametersCutOrderTypesDepthFirstAlways	depth first always type

enum NXOpen::CAM::CutParametersExtendAtStartMode

Available modes for Turning Cutting Corners Extend At Start
Created in NX8.5.0.

Enumerator:

CutParametersExtendAtStartModeNone	None.
CutParametersExtendAtStartModeToContainmentGeometry	To Containment Geometry.
CutParametersExtendAtStartModeIncludeAdjacentChamfersOrRounds	Include Adjacent Chamfers or Rounds.

enum NXOpen::CAM::CutParametersExtendFloorTypes

extend floor to options
Created in NX8.0.0.

Enumerator:

CutParametersExtendFloorTypesNone	None.
CutParametersExtendFloorTypesPartOutline	Part Outline.
CutParametersExtendFloorTypesBlankOutline	Blank Outline.

enum NXOpen::CAM::CutParametersFilletsTypes

Available types for fillets
Created in NX6.0.0.

Enumerator:

CutParametersFilletsTypesAddIntoFaces	Fillets mode: Add into Faces.
CutParametersFilletsTypesAddIntoDiameters	Fillets mode: Add into Diameters.
CutParametersFilletsTypesSplit	Fillets mode: Split.
CutParametersFilletsTypesOmit	Fillets mode: Omit.

enum NXOpen::CAM::CutParametersFinishPassesTypes

Available types for finish passes
Created in NX6.0.0.

Enumerator:

CutParametersFinishPassesTypesMaintain	Maintain.
CutParametersFinishPassesTypesAlternate	Alternate.

enum NXOpen::CAM::CutParametersIpwTypes

Available types for IPW.

Enumerator:

CutParametersIpwTypesThickness	Thickness.
CutParametersIpwTypesNone	none
CutParametersIpwTypesThreeDimension	3d type
CutParametersIpwTypesLevelBased	level based type
CutParametersIpwTypesTwoDimension	2d type
CutParametersIpwTypesUseReferenceTool	Use reference tool.
CutParametersIpwTypesLocal	Local to feature.

enum NXOpen::CAM::CutParametersPatternDirectionTypes

Available types for pattern direction.

Enumerator:

CutParametersPatternDirectionTypesOutward	Outward.
CutParametersPatternDirectionTypesInward	Inward.

enum NXOpen::CAM::CutParametersPlungeDirectionTypes

Available types for plunge direction.

Enumerator:

CutParametersPlungeDirectionTypesCutDown	Cut Down.
CutParametersPlungeDirectionTypesUpAndDown	Cut Up and Down.

enum NXOpen::CAM::CutParametersProfileCutRegionsTypes

Available types for profile
Created in NX6.0.0.

Enumerator:

CutParametersProfileCutRegionsTypesAutomaticDetection	Profile cut regions: Automatic Detection.
CutParametersProfileCutRegionsTypesSameAsRoughing	Profile cut regions: Same as Roughing.

enum NXOpen::CAM::CutParametersRegionSequencingTypes

Available types for region resequencing method.

Enumerator:

CutParametersRegionSequencingTypesStandard	standard
CutParametersRegionSequencingTypesOptimize	Optimize.
CutParametersRegionSequencingTypesRegionPoints	Follow Start Points.
CutParametersRegionSequencingTypesPredrillPoints	Follow Predrill Points.

enum NXOpen::CAM::CutParametersSimplifyShapesTypes

Available types for simplify shapes method.

Enumerator:

CutParametersSimplifyShapesTypesNone	none
CutParametersSimplifyShapesTypesConvexHull	convex hull
CutParametersSimplifyShapesTypesMinimumBox	minumum box

enum NXOpen::CAM::CutParametersToolRunOffTypes

Available types for Tool Run Off Options
Created in NX8.0.0.

Enumerator:

CutParametersToolRunOffTypesExtendToRegion	Extend To Region.
CutParametersToolRunOffTypesSpecify	Specify.

enum NXOpen::CAM::CutParametersTraverseOpenPassesTypes

Available types for traverse open passes.

Enumerator:

CutParametersTraverseOpenPassesTypesZig	Maintain cut direction.
CutParametersTraverseOpenPassesTypesZigZag	Alternate cut direction.

enum NXOpen::CAM::CutParametersTrimControlTypes

Available types for trim control method.

Enumerator:

CutParametersTrimControlTypesNone	none
CutParametersTrimControlTypesSilhoutte	silhoutte type
CutParametersTrimControlTypesExteriorEdges	exterior edges

enum NXOpen::CAM::FeedRapidOutputMode

The type for rapid feed output mode
Created in NX8.0.0.

Enumerator:

FeedRapidOutputModeG0	G0–non interpolated rapid motion.
FeedRapidOutputModeG1	G1–interpolated motion.

enum NXOpen::CAM::FeedRateUnit

The unit of feed rate (please cf.

CAM::CAMObject::FeedRateUnit )
Created in NX5.0.0.

Enumerator:

FeedRateUnitNone	no feed rate unit
FeedRateUnitPerMinute	use per minute as the feed rate unit
FeedRateUnitPerRevolution	use per revolution as the feed rate unit
FeedRateUnitRapid	use rapid as feed rate unit
FeedRateUnitCutPercent	use cut percent as feed rate unit

enum NXOpen::CAM::Inheritance

The inheritance setting for enum component within status components
Created in NX5.0.0.

Enumerator:

InheritanceNo	no inheritance
InheritanceYes	parameter inherited

enum NXOpen::CAM::ParamValueIntent

The source of values for design logic enum component within status components
Created in NX5.0.0.

Enumerator:

ParamValueIntentPartUnits	value used as is
ParamValueIntentToolDep	value is percent of tool