Represents the move collection
To obtain an instance of this class, refer to CAM::Operation

Created in NX5.0.0. More...

Inheritance diagram for NXOpen::CAM::MoveCollection:

Classes
class	iterator
	Iterator for accessing the contents of the collection. More...

Public Member Functions
iterator	begin ()
	Returns an iterator addressing the first element.

NXOpen::CAM::AlongMachineAxisMoveBuilder *	CreateAlongMachineAxisMoveBuilder (NXOpen::CAM::Move *param)
	Create a Move To Machine Position.

NXOpen::CAM::AlongMcsAxisMoveBuilder *	CreateAlongMcsAxisMoveBuilder (NXOpen::CAM::Move *param)
	Create a Move to MCS Position.

NXOpen::CAM::AlongToolAxisMoveBuilder *	CreateAlongToolAxisMoveBuilder (NXOpen::CAM::Move *param)
	Create a Move Along Tool Axis.

NXOpen::CAM::CircularAboutAxisMoveBuilder *	CreateCircularAboutAxisMoveBuilder (NXOpen::CAM::Move *param)
	Create a Circular Move.

NXOpen::CAM::DeltaMoveBuilder *	CreateDeltaMoveBuilder (NXOpen::CAM::Move *param)
	Create a Delta Move.

NXOpen::CAM::FollowCurveMoveBuilder *	CreateFollowCurveMoveBuilder (NXOpen::CAM::Move *param)
	Create Follow Curve Move.

NXOpen::CAM::FollowPartMoveBuilder *	CreateFollowPartMoveBuilder (NXOpen::CAM::Move *param)
	Create Follow Part Move.

NXOpen::CAM::LaserCircleCutout *	CreateLaserCircleCutout (NXOpen::CAM::Move *param)
	Create a Laser Circle Cutout.

NXOpen::CAM::LaserHexagonCutout *	CreateLaserHexagonCutout (NXOpen::CAM::Move *param)
	Create a Laser Hexagon Cutout.

NXOpen::CAM::LaserLinearMove *	CreateLaserLinearMove (NXOpen::CAM::Move *param)
	Create a Laser Linear Move.

NXOpen::CAM::LaserProfileMove *	CreateLaserProfileMove (NXOpen::CAM::Move *param)
	Create a Laser Profile Move.

NXOpen::CAM::LaserRectangleCutout *	CreateLaserRectangleCutout (NXOpen::CAM::Move *param)
	Create a Laser Rectangle Cutout.

NXOpen::CAM::LaserSlotCutout *	CreateLaserSlotCutout (NXOpen::CAM::Move *param)
	Create a Laser Slot Cutout.

NXOpen::CAM::MoveToPointBuilder *	CreateMoveToPointBuilder (NXOpen::CAM::Move *param)
	Create a Move to Point.

NXOpen::CAM::NormalToToolAxisMoveBuilder *	CreateNormalToToolAxisMoveBuilder (NXOpen::CAM::Move *param)
	Create a Move Normal to Tool Axis.

NXOpen::CAM::ProbeCalibrateLengthMoveBuilder *	CreateProbeCalibrateLengthMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Calibrate Length Move.

NXOpen::CAM::ProbeCalibrateSphereMoveBuilder *	CreateProbeCalibrateSphereMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Calibrate on Sphere Move.

NXOpen::CAM::ProbeCalibrateStylusMoveBuilder *	CreateProbeCalibrateStylusMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Calibrate Stylus Move.

NXOpen::CAM::ProbeClearanceMoveBuilder *	CreateProbeClearanceMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Clearance Plane Change.

NXOpen::CAM::ProbeInspectBorebossMoveBuilder *	CreateProbeInspectBorebossMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Inspect Bore-Boss Move.

NXOpen::CAM::ProbeInspectPointMoveBuilder *	CreateProbeInspectPointMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Inspect Point Move.

NXOpen::CAM::ProbeInspectSurfacePointMoveBuilder *	CreateProbeInspectSurfacePointMoveBuilder (NXOpen::CAM::Move *param)
	Create a Probe Inspect Surface Point Move.

NXOpen::CAM::RotaryPointMoveBuilder *	CreateRotaryPointMoveBuilder (NXOpen::CAM::Move *param)
	Create a Rotary Move to Point.

NXOpen::CAM::RotaryPolarMoveBuilder *	CreateRotaryPolarMoveBuilder (NXOpen::CAM::Move *param)
	Create a Rotary Polar Move.

NXOpen::CAM::RotateToolMoveBuilder *	CreateRotateToolMoveBuilder (NXOpen::CAM::Move param, NXOpen::CAM::Move insertAfterTag)
	Create a Rotate Tool Move.

NXOpen::CAM::TeachmodeEngageSettingsBuilder *	CreateTeachmodeEngageSettingsBuilder (NXOpen::CAM::Move *param)
	Create a Teachmode Engage Settings.

NXOpen::CAM::TeachmodeLinearMoveBuilder *	CreateTeachmodeLinearMoveBuilder (NXOpen::CAM::Move *param)
	Create a Teachmode Linear Move.

NXOpen::CAM::TeachmodeProfileMoveBuilder *	CreateTeachmodeProfileMoveBuilder (NXOpen::CAM::Move *param)
	Create a Teachmode Profile Move.

NXOpen::CAM::TeachmodeRetractSettingsBuilder *	CreateTeachmodeRetractSettingsBuilder (NXOpen::CAM::Move *param)
	Create a Teachmode Retract Settings.

NXOpen::CAM::ToolTrackingPointBuilder *	CreateToolTrackingPointBuilder (NXOpen::CAM::Move *param)
	Create Tracking Point Move.

NXOpen::CAM::TurnMoveToPointBuilder *	CreateTurnMoveToPointBuilder (NXOpen::CAM::Move *param)
	Create a Turn Linear Move.

NXOpen::CAM::TurnProbeClearanceBuilder *	CreateTurnProbeClearanceBuilder (NXOpen::CAM::Move *param)
	Create a Turn Probe Clearance Move.

NXOpen::CAM::TurnProbeInspectPointMoveBuilder *	CreateTurnProbeInspectPointMoveBuilder (NXOpen::CAM::Move *param)
	Create a Turn Probe Inspect Point Move.

NXOpen::CAM::UdeMoveBuilder *	CreateUdeMoveBuilder (NXOpen::CAM::Move *param)
	Create a UDE Move.

NXOpen::CAM::UserDefinedMoveBuilder *	CreateUserDefinedMoveBuilder (NXOpen::CAM::Move *param, const NXString &typeName)
	Create User Defined Move.

NXOpen::CAM::UserDefinedMoveBuilder *	CreateUserDefinedMoveBuilder (NXOpen::CAM::Move param, const char typeName)
	Create User Defined Move.

NXOpen::CAM::VectorDistanceMoveBuilder *	CreateVectorDistanceMoveBuilder (NXOpen::CAM::Move *param)
	Create a Vector Distance Move.

iterator	end ()
	Returns an iterator addressing one past the last element.

NXOpen::CAM::Move *	FindObject (const NXString &sid)
	Finds the CAM.Operation object with the given identifier as recorded in a journal.

NXOpen::CAM::Move *	FindObject (const char *sid)
	Finds the CAM.Operation object with the given identifier as recorded in a journal.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the move collection
To obtain an instance of this class, refer to CAM::Operation

Created in NX5.0.0.

Member Function Documentation

iterator NXOpen::CAM::MoveCollection::begin ( )

Returns an iterator addressing the first element.

NXOpen::CAM::AlongMachineAxisMoveBuilder* NXOpen::CAM::MoveCollection::CreateAlongMachineAxisMoveBuilder ( NXOpen::CAM::Move * param )

Create a Move To Machine Position.

Returns: Machine Position Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::AlongMcsAxisMoveBuilder* NXOpen::CAM::MoveCollection::CreateAlongMcsAxisMoveBuilder ( NXOpen::CAM::Move * param )

Create a Move to MCS Position.

Returns: MCS Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::AlongToolAxisMoveBuilder* NXOpen::CAM::MoveCollection::CreateAlongToolAxisMoveBuilder ( NXOpen::CAM::Move * param )

Create a Move Along Tool Axis.

Returns: Along Tool Axis Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::CircularAboutAxisMoveBuilder* NXOpen::CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder ( NXOpen::CAM::Move * param )

Create a Circular Move.

Returns: Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::DeltaMoveBuilder* NXOpen::CAM::MoveCollection::CreateDeltaMoveBuilder ( NXOpen::CAM::Move * param )

Create a Delta Move.

Returns: Delta Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::FollowCurveMoveBuilder* NXOpen::CAM::MoveCollection::CreateFollowCurveMoveBuilder ( NXOpen::CAM::Move * param )

Create Follow Curve Move.

Returns: Builder
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::FollowPartMoveBuilder* NXOpen::CAM::MoveCollection::CreateFollowPartMoveBuilder ( NXOpen::CAM::Move * param )

Create Follow Part Move.

Returns: Builder
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::LaserCircleCutout* NXOpen::CAM::MoveCollection::CreateLaserCircleCutout ( NXOpen::CAM::Move * param )

Create a Laser Circle Cutout.

Returns: Laser Circle Cutout
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::LaserHexagonCutout* NXOpen::CAM::MoveCollection::CreateLaserHexagonCutout ( NXOpen::CAM::Move * param )

Create a Laser Hexagon Cutout.

Returns: Laser Hexagon Cutout
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::LaserLinearMove* NXOpen::CAM::MoveCollection::CreateLaserLinearMove ( NXOpen::CAM::Move * param )

Create a Laser Linear Move.

Returns: Laser Linear Move
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::LaserProfileMove* NXOpen::CAM::MoveCollection::CreateLaserProfileMove ( NXOpen::CAM::Move * param )

Create a Laser Profile Move.

Returns: Laser Profile Move
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::LaserRectangleCutout* NXOpen::CAM::MoveCollection::CreateLaserRectangleCutout ( NXOpen::CAM::Move * param )

Create a Laser Rectangle Cutout.

Returns: Laser Rectangle Cutout
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::LaserSlotCutout* NXOpen::CAM::MoveCollection::CreateLaserSlotCutout ( NXOpen::CAM::Move * param )

Create a Laser Slot Cutout.

Returns: Laser Slot Cutout
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Laser move object

NXOpen::CAM::MoveToPointBuilder* NXOpen::CAM::MoveCollection::CreateMoveToPointBuilder ( NXOpen::CAM::Move * param )

Create a Move to Point.

Returns: Move To Point Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::NormalToToolAxisMoveBuilder* NXOpen::CAM::MoveCollection::CreateNormalToToolAxisMoveBuilder ( NXOpen::CAM::Move * param )

Create a Move Normal to Tool Axis.

@return  Normal To Tool Axis Move Builder

Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::ProbeCalibrateLengthMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeCalibrateLengthMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Calibrate Length Move.

Returns: Probe Calibrate Length Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeCalibrateSphereMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeCalibrateSphereMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Calibrate on Sphere Move.

Returns: Probe Calibrate Sphere Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeCalibrateStylusMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeCalibrateStylusMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Calibrate Stylus Move.

Returns: Probe Calibrate Stylus Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeClearanceMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeClearanceMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Clearance Plane Change.

Returns: Probe Clearance Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeInspectBorebossMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeInspectBorebossMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Inspect Bore-Boss Move.

Returns: Probe Inspect Bore-boss Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeInspectPointMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeInspectPointMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Inspect Point Move.

Returns: Probe Inspect Point Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::ProbeInspectSurfacePointMoveBuilder* NXOpen::CAM::MoveCollection::CreateProbeInspectSurfacePointMoveBuilder ( NXOpen::CAM::Move * param )

Create a Probe Inspect Surface Point Move.

Returns: Probe Inspect Surface Point Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::RotaryPointMoveBuilder* NXOpen::CAM::MoveCollection::CreateRotaryPointMoveBuilder ( NXOpen::CAM::Move * param )

Create a Rotary Move to Point.

Returns: Rotary Point Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::RotaryPolarMoveBuilder* NXOpen::CAM::MoveCollection::CreateRotaryPolarMoveBuilder ( NXOpen::CAM::Move * param )

Create a Rotary Polar Move.

Returns: Rotary Polar Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::RotateToolMoveBuilder* NXOpen::CAM::MoveCollection::CreateRotateToolMoveBuilder	(	NXOpen::CAM::Move *	param,
		NXOpen::CAM::Move *	insertAfterTag
	)

Create a Rotate Tool Move.

Returns: Rotate Tool Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param	Move Object
insertAfterTag	Preceeding move

NXOpen::CAM::TeachmodeEngageSettingsBuilder* NXOpen::CAM::MoveCollection::CreateTeachmodeEngageSettingsBuilder ( NXOpen::CAM::Move * param )

Create a Teachmode Engage Settings.

Returns: Teachmode Engage Settings Builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Teachmode Suboperation object

NXOpen::CAM::TeachmodeLinearMoveBuilder* NXOpen::CAM::MoveCollection::CreateTeachmodeLinearMoveBuilder ( NXOpen::CAM::Move * param )

Create a Teachmode Linear Move.

Returns: Teachmode Linear Move Builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Teachmode Suboperation object

NXOpen::CAM::TeachmodeProfileMoveBuilder* NXOpen::CAM::MoveCollection::CreateTeachmodeProfileMoveBuilder ( NXOpen::CAM::Move * param )

Create a Teachmode Profile Move.

Returns: Teachmode Profile Move Builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Teachmode Suboperation object

NXOpen::CAM::TeachmodeRetractSettingsBuilder* NXOpen::CAM::MoveCollection::CreateTeachmodeRetractSettingsBuilder ( NXOpen::CAM::Move * param )

Create a Teachmode Retract Settings.

Returns: Teachmode Retract Settings Builder
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Teachmode Suboperation object

NXOpen::CAM::ToolTrackingPointBuilder* NXOpen::CAM::MoveCollection::CreateToolTrackingPointBuilder ( NXOpen::CAM::Move * param )

Create Tracking Point Move.

Returns: Builder
Created in NX8.5.1.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::TurnMoveToPointBuilder* NXOpen::CAM::MoveCollection::CreateTurnMoveToPointBuilder ( NXOpen::CAM::Move * param )

Create a Turn Linear Move.

Returns: Turn Move To Point Builder
Created in NX8.5.1.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::TurnProbeClearanceBuilder* NXOpen::CAM::MoveCollection::CreateTurnProbeClearanceBuilder ( NXOpen::CAM::Move * param )

Create a Turn Probe Clearance Move.

Returns: Turn Probe Clearance Builder
Created in NX8.5.1.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::TurnProbeInspectPointMoveBuilder* NXOpen::CAM::MoveCollection::CreateTurnProbeInspectPointMoveBuilder ( NXOpen::CAM::Move * param )

Create a Turn Probe Inspect Point Move.

Returns: Probe Inspect Point Move Builder
Created in NX8.5.1.

License requirements : cam_base ("CAM BASE")

Parameters

param Move object

NXOpen::CAM::UdeMoveBuilder* NXOpen::CAM::MoveCollection::CreateUdeMoveBuilder ( NXOpen::CAM::Move * param )

Create a UDE Move.

Returns: Ude Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

NXOpen::CAM::UserDefinedMoveBuilder* NXOpen::CAM::MoveCollection::CreateUserDefinedMoveBuilder	(	NXOpen::CAM::Move *	param,
		const NXString &	typeName
	)

Create User Defined Move.

Returns: Builder
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param	Move object
typeName	Type of the User Defined Move to create. When editing the move this will not be used NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::UserDefinedMoveBuilder* NXOpen::CAM::MoveCollection::CreateUserDefinedMoveBuilder	(	NXOpen::CAM::Move *	param,
		const char *	typeName
	)

Create User Defined Move.

Returns: Builder
Created in NX8.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param	Move object
typeName	Type of the User Defined Move to create. When editing the move this will not be used NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::VectorDistanceMoveBuilder* NXOpen::CAM::MoveCollection::CreateVectorDistanceMoveBuilder ( NXOpen::CAM::Move * param )

Create a Vector Distance Move.

Returns: Delta Move Builder
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param Move Object

iterator NXOpen::CAM::MoveCollection::end ( )

Returns an iterator addressing one past the last element.

NXOpen::CAM::Move* NXOpen::CAM::MoveCollection::FindObject ( const NXString & sid )

Finds the CAM.Operation object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

sid	the name of the object

NXOpen::CAM::Move* NXOpen::CAM::MoveCollection::FindObject ( const char * sid )

Finds the CAM.Operation object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

sid	the name of the object

tag_t NXOpen::CAM::MoveCollection::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

CAM_MoveCollection.hxx

Classes

Public Member Functions

Detailed Description

Member Function Documentation