Represents the ncgroup collection
To obtain an instance of this class, refer to CAM::CAMSetup

Created in NX4.0.0. More...

Inheritance diagram for NXOpen::CAM::NCGroupCollection:

Classes
class	iterator
	Iterator for accessing the contents of the collection. More...

Public Types
enum	UseDefaultName { UseDefaultNameFalse, UseDefaultNameTrue }
	Whether use the default name in creation. More...

Public Member Functions
iterator	begin ()
	Returns an iterator addressing the first element.

NXOpen::CAM::BarrelToolBuilder *	CreateBarrelToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a barrel builder.

NXOpen::CAM::DrillBackSpotfacingToolBuilder *	CreateDrillBackSpotfacingToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill back spotfacing tool builder.

NXOpen::CAM::DrillBoreToolBuilder *	CreateDrillBoreToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill bore tool builder.

NXOpen::CAM::DrillBurnishingToolBuilder *	CreateDrillBurnishingToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill burnishing tool builder.

NXOpen::CAM::DrillCenterBellToolBuilder *	CreateDrillCenterBellToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill center bell tool builder.

NXOpen::CAM::DrillCoreToolBuilder *	CreateDrillCoreToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill core tool builder.

NXOpen::CAM::DrillCounterboreToolBuilder *	CreateDrillCounterboreToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill counterbore tool builder.

NXOpen::CAM::DrillCtskToolBuilder *	CreateDrillCtskToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill ctsk tool builder.

NXOpen::CAM::DrillGeomBuilder *	CreateDrillGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill geometry builder.

NXOpen::CAM::DrillMethodBuilder *	CreateDrillMethodBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill method builder.

NXOpen::CAM::DrillReamerToolBuilder *	CreateDrillReamerToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill reamer tool builder.

NXOpen::CAM::DrillSpotdrillToolBuilder *	CreateDrillSpotdrillToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill spotdrill tool builder.

NXOpen::CAM::DrillSpotfaceToolBuilder *	CreateDrillSpotfaceToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill spotface tool builder.

NXOpen::CAM::DrillStdToolBuilder *	CreateDrillStdToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill tool builder.

NXOpen::CAM::DrillStepToolBuilder *	CreateDrillStepToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill step tool builder.

NXOpen::CAM::DrillTapToolBuilder *	CreateDrillTapToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill tap tool builder.

NXOpen::CAM::DrillThreadMillToolBuilder *	CreateDrillThreadMillToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a drill thread mill tool builder.

NXOpen::CAM::FeatureBasedGeomBuilder *	CreateFeatureBasedGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a manufacturing feature based geometry builder.

NXOpen::CAM::FormToolBuilder *	CreateFormToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a form builder.

NXOpen::CAM::GenericToolBuilder *	CreateGenericToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a generic solid tool builder.

NXOpen::CAM::NCGroup *	CreateGeometry (NXOpen::CAM::NCGroup *parentGroup, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const NXString &newGeometryName)
	Create a geometry group of the specified type and subtype under the parent group.

NXOpen::CAM::NCGroup *	CreateGeometry (NXOpen::CAM::NCGroup parentGroup, const char typeName, const char subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const char newGeometryName)
	Create a geometry group of the specified type and subtype under the parent group.

NXOpen::CAM::NCGroup *	CreateGeometry (NXOpen::CAM::NCGroup parentGroup, const std::vector< NXOpen::CAM::CAMFeature > &features, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const NXString &newGeometryName)
	Create geometry groups of the specified type and subtype under the parent group for the specified manufacturing features.

NXOpen::CAM::NCGroup *	CreateGeometry (NXOpen::CAM::NCGroup parentGroup, const std::vector< NXOpen::CAM::CAMFeature > &features, const char typeName, const char subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const char *newGeometryName)
	Create geometry groups of the specified type and subtype under the parent group for the specified manufacturing features.

NXOpen::CAM::GrooveToolBuilder *	CreateGrooveToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a groove builder.

NXOpen::CAM::GroupFeatures *	CreateGroupFeatures ()
	Creates the group features.

NXOpen::CAM::HoleBossGeometry *	CreateHoleBossGeometryBuilder (NXOpen::CAM::CAMObject *param)
	Create Hole or Boss Geometry builder.

NXOpen::CAM::LaserMethod *	CreateLaserMethod (NXOpen::CAM::CAMObject *param)
	Creates a laser method.

NXOpen::CAM::LaserTool *	CreateLaserTool (NXOpen::CAM::CAMObject *param)
	Create a laser tool.

NXOpen::CAM::MachineGroupBuilder *	CreateMachineGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a machine group builder.

NXOpen::CAM::MachineHeadGroupBuilder *	CreateMachineHeadGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a machine head group builder.

NXOpen::CAM::MachinePocketGroupBuilder *	CreateMachinePocketGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a machine pocket group builder.

NXOpen::CAM::MachineTurretGroupBuilder *	CreateMachineTurretGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a machine turret group builder.

NXOpen::CAM::NCGroup *	CreateMethod (NXOpen::CAM::NCGroup *parentGroup, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const NXString &newMethodName)
	Create a method group of the specified type and subtype under the parent group.

NXOpen::CAM::NCGroup *	CreateMethod (NXOpen::CAM::NCGroup parentGroup, const char typeName, const char subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const char newMethodName)
	Create a method group of the specified type and subtype under the parent group.

NXOpen::CAM::MillAreaGeomBuilder *	CreateMillAreaGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill area geometry builder.

NXOpen::CAM::MillBoundaryGeomBuilder *	CreateMillBoundaryGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill boundary geometry builder.

NXOpen::CAM::MillFormToolBuilder *	CreateMillFormToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill form builder.

NXOpen::CAM::MillGeomBuilder *	CreateMillGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill geometry builder.

NXOpen::CAM::MillMethodBuilder *	CreateMillMethodBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill method builder.

NXOpen::CAM::MillOrientGeomBuilder *	CreateMillOrientGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill orient geometry builder.

NXOpen::CAM::MillTextGeomBuilder *	CreateMillTextGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill text geometry builder.

NXOpen::CAM::MillToolBuilder *	CreateMillToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill tool builder.

NXOpen::CAM::MillVolumeGeomBuilder *	CreateMillVolumeGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a mill volume geometry builder.

NXOpen::CAM::MultiBladeGeomBuilder *	CreateMultiBladeGeometryBuilder (NXOpen::CAM::CAMObject *param)
	Creates a blade geometry builder.

NXOpen::CAM::NcmPlanarBuilder *	CreateNcmPlanarBuilder ()
	Creates a builder for Non-Cutting Moves for Planar Milling.

NXOpen::CAM::NcmScBuilder *	CreateNcmScBuilder ()
	Creates a builder for Non-Cutting Moves for Surface Contouring.

NXOpen::CAM::OptimizeTraverseGroupBuilder *	CreateOptimizeTraverseGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a optimize traverse group builder.

NXOpen::CAM::ProbeToolBuilder *	CreateProbeToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a probe tool builder.

NXOpen::CAM::NCGroup *	CreateProgram (NXOpen::CAM::NCGroup *parentGroup, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const NXString &newProgramName)
	Create a program group of the specified type and subtype under the parent group.

NXOpen::CAM::NCGroup *	CreateProgram (NXOpen::CAM::NCGroup parentGroup, const char typeName, const char subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const char newProgramName)
	Create a program group of the specified type and subtype under the parent group.

NXOpen::CAM::ProgramOrderGroupBuilder *	CreateProgramOrderGroupBuilder (NXOpen::CAM::CAMObject *param)
	Creates a program order group builder.

NXOpen::CAM::RotaryFinishGeomBuilder *	CreateRotaryFinishGeometryBuilder (NXOpen::CAM::CAMObject *param)
	Creates a rotary finish geometry builder.

NXOpen::CAM::ThreadToolBuilder *	CreateThreadToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a thread builder.

NXOpen::CAM::NCGroup *	CreateTool (NXOpen::CAM::NCGroup *parentGroup, const NXString &typeName, const NXString &subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const NXString &newToolName)
	Create a tool group of the specified type and subtype under the parent group.

NXOpen::CAM::NCGroup *	CreateTool (NXOpen::CAM::NCGroup parentGroup, const char typeName, const char subtypeName, NXOpen::CAM::NCGroupCollection::UseDefaultName useDefaultName, const char newToolName)
	Create a tool group of the specified type and subtype under the parent group.

NXOpen::CAM::TToolBuilder *	CreateTToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a t tool builder.

NXOpen::CAM::TurnAvoidanceGeomBuilder *	CreateTurnAvoidanceGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turning avoidance geometry builder.

NXOpen::CAM::TurnBoundaryGeomBuilder *	CreateTurnBoundaryGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turning boundary geometry builder.

NXOpen::CAM::TurnFeatureGeomBuilder *	CreateTurnFeatureGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turning feature geometry builder.

NXOpen::CAM::TurnGeomBuilder *	CreateTurnGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turning geometry builder.

NXOpen::CAM::TurnMethodBuilder *	CreateTurnMethodBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turn method builder.

NXOpen::CAM::TurnOrientGeomBuilder *	CreateTurnOrientGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turn orient geometry builder.

NXOpen::CAM::TurnToolBuilder *	CreateTurnToolBuilder (NXOpen::CAM::CAMObject *param)
	Creates a turn builder.

NXOpen::CAM::WedmBasedGeomBuilder *	CreateWedmBasedGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm based geometry builder.

NXOpen::CAM::WedmCornerControlBuilder *	CreateWedmCornerControlBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wedm_corner_control builder.

NXOpen::CAM::WedmCuttingBuilder *	CreateWedmCuttingBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wedm_cutting builder.

NXOpen::CAM::WedmExtGeomBuilder *	CreateWedmExtGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm external geometry builder.

NXOpen::CAM::WedmFeatureGeomBuilder *	CreateWedmFeatureGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm feature geometry builder.

NXOpen::CAM::WedmGeomBuilder *	CreateWedmGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm geometry builder.

NXOpen::CAM::WedmIntGeomBuilder *	CreateWedmIntGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm internal geometry builder.

NXOpen::CAM::WedmLeadInOutBuilder *	CreateWedmLeadInOutBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wedm_lead_in_out builder.

NXOpen::CAM::WedmMethodBuilder *	CreateWedmMethodBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wedm method builder.

NXOpen::CAM::WedmMoveControlBuilder *	CreateWedmMoveControlBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wedm_corner_control builder.

NXOpen::CAM::WedmNocoreGeomBuilder *	CreateWedmNocoreGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm nocore geometry builder.

NXOpen::CAM::WedmOpenGeomBuilder *	CreateWedmOpenGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm open geometry builder.

NXOpen::CAM::WedmOrientGeomBuilder *	CreateWedmOrientGeomBuilder (NXOpen::CAM::CAMObject *param)
	Creates a wire edm orient geometry builder.

NXOpen::CAM::WireTool *	CreateWireTool (NXOpen::CAM::CAMObject *param)
	Creates a wire tool.

iterator	end ()
	Returns an iterator addressing one past the last element.

NXOpen::CAM::NCGroup *	FindObject (const NXString &sid)
	Finds the CAM.NCGroup object with the given identifier as recorded in a journal.

NXOpen::CAM::NCGroup *	FindObject (const char *sid)
	Finds the CAM.NCGroup object with the given identifier as recorded in a journal.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the ncgroup collection
To obtain an instance of this class, refer to CAM::CAMSetup

Created in NX4.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::NCGroupCollection::UseDefaultName

Whether use the default name in creation.

Enumerator:

UseDefaultNameFalse	don't user the default name
UseDefaultNameTrue	use the default name

Member Function Documentation

iterator NXOpen::CAM::NCGroupCollection::begin ( )

Returns an iterator addressing the first element.

NXOpen::CAM::BarrelToolBuilder* NXOpen::CAM::NCGroupCollection::CreateBarrelToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a barrel builder.

Returns: barrel builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param barrel group to be edited

NXOpen::CAM::DrillBackSpotfacingToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillBackSpotfacingToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill back spotfacing tool builder.

Returns: drill back spotfacing tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill back spotfacing tool group to be edited

NXOpen::CAM::DrillBoreToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillBoreToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill bore tool builder.

Returns: drill bore tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill bore tool group to be edited

NXOpen::CAM::DrillBurnishingToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillBurnishingToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill burnishing tool builder.

Returns: drill burnishing tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill burnishing tool group to be edited

NXOpen::CAM::DrillCenterBellToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillCenterBellToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill center bell tool builder.

Returns: drill center bell tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill center bell tool group to be edited

NXOpen::CAM::DrillCoreToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillCoreToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill core tool builder.

Returns: drill core tool builder created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill core tool group to be edited

NXOpen::CAM::DrillCounterboreToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillCounterboreToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill counterbore tool builder.

Returns: drill counterbore tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill counterbore tool group to be edited

NXOpen::CAM::DrillCtskToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillCtskToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill ctsk tool builder.

Returns: drill ctsk tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill ctsk tool group to be edited

NXOpen::CAM::DrillGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::DrillMethodBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillMethodBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill method builder.

Returns: drill method builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill method group to be edited

NXOpen::CAM::DrillReamerToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillReamerToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill reamer tool builder.

Returns: drill reamer tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill reamer tool group to be edited

NXOpen::CAM::DrillSpotdrillToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillSpotdrillToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill spotdrill tool builder.

Returns: drill spotdrill tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill spotdrill tool group to be edited

NXOpen::CAM::DrillSpotfaceToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillSpotfaceToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill spotface tool builder.

Returns: drill spotface tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill spotface tool group to be edited

NXOpen::CAM::DrillStdToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillStdToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill tool builder.

Returns: drill std tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill std tool group to be edited

NXOpen::CAM::DrillStepToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillStepToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill step tool builder.

Returns: drill step tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill step tool group to be edited

NXOpen::CAM::DrillTapToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillTapToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill tap tool builder.

Returns: drill tap tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill tap tool group to be edited

NXOpen::CAM::DrillThreadMillToolBuilder* NXOpen::CAM::NCGroupCollection::CreateDrillThreadMillToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a drill thread mill tool builder.

Returns: drill thread mill tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param drill thread mill tool group to be edited

NXOpen::CAM::FeatureBasedGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateFeatureBasedGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a manufacturing feature based geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::FormToolBuilder* NXOpen::CAM::NCGroupCollection::CreateFormToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a form builder.

Returns: form builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param form group to be edited

NXOpen::CAM::GenericToolBuilder* NXOpen::CAM::NCGroupCollection::CreateGenericToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a generic solid tool builder.

Returns: generic tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param generic tool group to be edited

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateGeometry	(	NXOpen::CAM::NCGroup *	parentGroup,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const NXString &	newGeometryName
	)

Create a geometry group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.

Returns: the created geometry group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newGeometryName	the name of the created geometry group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateGeometry	(	NXOpen::CAM::NCGroup *	parentGroup,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const char *	newGeometryName
	)

Create a geometry group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.

Returns: the created geometry group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newGeometryName	the name of the created geometry group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateGeometry	(	NXOpen::CAM::NCGroup *	parentGroup,
		const std::vector< NXOpen::CAM::CAMFeature * > &	features,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const NXString &	newGeometryName
	)

Create geometry groups of the specified type and subtype under the parent group for the specified manufacturing features.

If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.

Returns: one of the created geometry groups
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
features	the manufacturing features
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newGeometryName	the name of the created geometry group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateGeometry	(	NXOpen::CAM::NCGroup *	parentGroup,
		const std::vector< NXOpen::CAM::CAMFeature * > &	features,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const char *	newGeometryName
	)

Create geometry groups of the specified type and subtype under the parent group for the specified manufacturing features.

If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.

Returns: one of the created geometry groups
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
features	the manufacturing features
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newGeometryName	the name of the created geometry group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::GrooveToolBuilder* NXOpen::CAM::NCGroupCollection::CreateGrooveToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a groove builder.

Returns: groove builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param groove group to be edited

NXOpen::CAM::GroupFeatures* NXOpen::CAM::NCGroupCollection::CreateGroupFeatures ( )

Creates the group features.

Returns: group features created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::HoleBossGeometry* NXOpen::CAM::NCGroupCollection::CreateHoleBossGeometryBuilder ( NXOpen::CAM::CAMObject * param )

Create Hole or Boss Geometry builder.

Returns: Hole or Boss Geometry builder created
Created in NX7.5.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::LaserMethod* NXOpen::CAM::NCGroupCollection::CreateLaserMethod ( NXOpen::CAM::CAMObject * param )

Creates a laser method.

Returns: laser method builder created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param laser method group to be edited

NXOpen::CAM::LaserTool* NXOpen::CAM::NCGroupCollection::CreateLaserTool ( NXOpen::CAM::CAMObject * param )

Create a laser tool.

Returns: laser tool builder created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param probe tool group to be edited

NXOpen::CAM::MachineGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateMachineGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a machine group builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MachineHeadGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateMachineHeadGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a machine head group builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MachinePocketGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateMachinePocketGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a machine pocket group builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MachineTurretGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateMachineTurretGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a machine turret group builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateMethod	(	NXOpen::CAM::NCGroup *	parentGroup,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const NXString &	newMethodName
	)

Create a method group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created method group; otherwise, the specified name will be used.

Returns: the created method group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newMethodName	the name of the created method group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateMethod	(	NXOpen::CAM::NCGroup *	parentGroup,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const char *	newMethodName
	)

Create a method group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created method group; otherwise, the specified name will be used.

Returns: the created method group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newMethodName	the name of the created method group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::MillAreaGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillAreaGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill area geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MillBoundaryGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillBoundaryGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill boundary geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MillFormToolBuilder* NXOpen::CAM::NCGroupCollection::CreateMillFormToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill form builder.

Returns: mill form builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param mill form group to be edited

NXOpen::CAM::MillGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MillMethodBuilder* NXOpen::CAM::NCGroupCollection::CreateMillMethodBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill method builder.

Returns: mill method builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param mill method group to be edited

NXOpen::CAM::MillOrientGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillOrientGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill orient geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MillTextGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillTextGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill text geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MillToolBuilder* NXOpen::CAM::NCGroupCollection::CreateMillToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill tool builder.

Returns: mill tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param mill tool group to be edited

NXOpen::CAM::MillVolumeGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMillVolumeGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a mill volume geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::MultiBladeGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateMultiBladeGeometryBuilder ( NXOpen::CAM::CAMObject * param )

Creates a blade geometry builder.

Returns: builder created
Created in NX7.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::NcmPlanarBuilder* NXOpen::CAM::NCGroupCollection::CreateNcmPlanarBuilder ( )

Creates a builder for Non-Cutting Moves for Planar Milling.

Returns: builder being created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::NcmScBuilder* NXOpen::CAM::NCGroupCollection::CreateNcmScBuilder ( )

Creates a builder for Non-Cutting Moves for Surface Contouring.

Returns: builder being created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

NXOpen::CAM::OptimizeTraverseGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateOptimizeTraverseGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a optimize traverse group builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::ProbeToolBuilder* NXOpen::CAM::NCGroupCollection::CreateProbeToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a probe tool builder.

Returns: probe tool builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param probe tool group to be edited

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateProgram	(	NXOpen::CAM::NCGroup *	parentGroup,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const NXString &	newProgramName
	)

Create a program group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created program group; otherwise, the specified name will be used.

Returns: the created program group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newProgramName	the name of the created program group, only used when use_default_name == true. NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateProgram	(	NXOpen::CAM::NCGroup *	parentGroup,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const char *	newProgramName
	)

Create a program group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created program group; otherwise, the specified name will be used.

Returns: the created program group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newProgramName	the name of the created program group, only used when use_default_name == true. NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::ProgramOrderGroupBuilder* NXOpen::CAM::NCGroupCollection::CreateProgramOrderGroupBuilder ( NXOpen::CAM::CAMObject * param )

Creates a program order group builder.

Returns: program order group builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::RotaryFinishGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateRotaryFinishGeometryBuilder ( NXOpen::CAM::CAMObject * param )

Creates a rotary finish geometry builder.

Returns: builder created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::ThreadToolBuilder* NXOpen::CAM::NCGroupCollection::CreateThreadToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a thread builder.

Returns: thread builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param thread group to be edited

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateTool	(	NXOpen::CAM::NCGroup *	parentGroup,
		const NXString &	typeName,
		const NXString &	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const NXString &	newToolName
	)

Create a tool group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created tool group; otherwise, the specified name will be used.

Returns: the created tool group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newToolName	the name of the created tool group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::CreateTool	(	NXOpen::CAM::NCGroup *	parentGroup,
		const char *	typeName,
		const char *	subtypeName,
		NXOpen::CAM::NCGroupCollection::UseDefaultName	useDefaultName,
		const char *	newToolName
	)

Create a tool group of the specified type and subtype under the parent group.

If the value of use_default_name is true, default name will be used for the created tool group; otherwise, the specified name will be used.

Returns: the created tool group
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

parentGroup	the parent group
typeName	the name of the template type NOTE: The full Unicode character set is not supported for this parameter.
subtypeName	the name of the template subtype NOTE: The full Unicode character set is not supported for this parameter.
useDefaultName	use the default name or not
newToolName	the name of the created tool group, only used when use_default_name == true NOTE: The full Unicode character set is not supported for this parameter.

NXOpen::CAM::TToolBuilder* NXOpen::CAM::NCGroupCollection::CreateTToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a t tool builder.

Returns: t builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param t group to be edited

NXOpen::CAM::TurnAvoidanceGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnAvoidanceGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turning avoidance geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::TurnBoundaryGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnBoundaryGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turning boundary geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::TurnFeatureGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnFeatureGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turning feature geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::TurnGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turning geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::TurnMethodBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnMethodBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turn method builder.

Returns: turn method builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param turn method group to be edited

NXOpen::CAM::TurnOrientGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnOrientGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turn orient geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::TurnToolBuilder* NXOpen::CAM::NCGroupCollection::CreateTurnToolBuilder ( NXOpen::CAM::CAMObject * param )

Creates a turn builder.

Returns: turn builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param turn group to be edited

NXOpen::CAM::WedmBasedGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmBasedGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm based geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmCornerControlBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmCornerControlBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wedm_corner_control builder.

Returns: builder created
Created in NX6.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmCuttingBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmCuttingBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wedm_cutting builder.

Returns: builder created
Created in NX6.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmExtGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmExtGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm external geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmFeatureGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmFeatureGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm feature geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmIntGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmIntGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm internal geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmLeadInOutBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmLeadInOutBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wedm_lead_in_out builder.

Returns: builder created
Created in NX6.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmMethodBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmMethodBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wedm method builder.

Returns: wedm method builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param wedm method group to be edited

NXOpen::CAM::WedmMoveControlBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmMoveControlBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wedm_corner_control builder.

Returns: builder created
Created in NX6.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmNocoreGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmNocoreGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm nocore geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmOpenGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmOpenGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm open geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WedmOrientGeomBuilder* NXOpen::CAM::NCGroupCollection::CreateWedmOrientGeomBuilder ( NXOpen::CAM::CAMObject * param )

Creates a wire edm orient geometry builder.

Returns: builder created
Created in NX5.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param the object to be edited

NXOpen::CAM::WireTool* NXOpen::CAM::NCGroupCollection::CreateWireTool ( NXOpen::CAM::CAMObject * param )

Creates a wire tool.

Returns: wire tool created
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

param wire tool group to be edited

iterator NXOpen::CAM::NCGroupCollection::end ( )

Returns an iterator addressing one past the last element.

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::FindObject ( const NXString & sid )

Finds the CAM.NCGroup object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

sid	the name of the object

NXOpen::CAM::NCGroup* NXOpen::CAM::NCGroupCollection::FindObject ( const char * sid )

Finds the CAM.NCGroup object with the given identifier as recorded in a journal.

Returns: the found object
Created in NX4.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

sid	the name of the object

tag_t NXOpen::CAM::NCGroupCollection::Tag ( ) const

Returns the tag of this object.

The documentation for this class was generated from the following file:

CAM_NCGroupCollection.hxx

Classes

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation