购买与咨询 NX 二次开发视频教程，请联系微信号：13890821008  QQ号：85585969  

1,查找刀具属性

tag_t tool_id=NULL;
double tool_diam=0;
UF_OPER_ask_cutter_group(oper_tag,&tool_id);
UF_PARAM_ask_double_value(tool_id,UF_PARAM_TL_DIAMETER,&tool_diam);//查找直径
char tool_text[133];
char ch_s[10]="", ch_f[10]="",*ch_p=NULL;
double tool_s=0 ,tool_f=0;//主轴转速，进给
                   
if(UF_CALL(UF_PARAM_ask_str_value(tool_id,1158,tool_text))==0)//属性文本
{ 
        ch_p=strstr(tool_text,"S=");

●●●请先 登陆 或 注册 后查看●●●

        ch_p=NULL;
        ch_p=strstr(tool_text,"F=");
        if (ch_p!=NULL)
        {
                        int i=0;
                        ch_p=ch_p+2;
                        while((48<=*ch_p&&*ch_p<=57)||46==*ch_p)//当指针指向为数字或者小数点
                        {
                                        ch_f=*ch_p;
                                        i++;
                                        ch_p++;
                        }
                        ch_f='\0';
                        if(i!=0)
                        {
                                        tool_f=atof(ch_f);
                        }
                        // uc1601(ch_f,1);
        }
        
}

2，

//主轴开

UF_PATH_spindle_on_t spindle_data;
spindle_data.speed = tool_s;
spindle_data.maxrpm = 10000.0;
spindle_data.mode = UF_PATH_SPINDLE_MODE_RPM;
spindle_data.direction = UF_PATH_DIRECTION_CLOCKWISE;
spindle_data.speed_flag = TRUE;
spindle_data.maxrpm_flag = TRUE;
spindle_data.range_flag = FALSE;
UF_PATH_create_spindle_on( path_id, &spindle_data, NULL );
//主轴关
UF_PATH_create_spindle_off( path_id, NULL );

3，//打开刀具补偿

UF_PATH_cuTCom_t  cutcom_data;
cutcom_data.cutcom_mode = UF_PATH_CUTCOM_LEFT;
cutcom_data.plane_type = UF_PATH_PLANE_TYPE_NONE;
cutcom_data.cutcom_on_status = UF_PATH_CUTCOM_ON_BEFORE_ENGAGE;
cutcom_data.cutcom_off_status = UF_PATH_CUTCOM_OFF_AFTER_RETRACT;
cutcom_data.adjust_register = 1;
cutcom_data.full_cutcom_output = TRUE;
cutcom_data.adjust_flag = TRUE;
UF_PATH_create_cutcom( path_id, &cutcom_data, NULL );

//关闭刀具补偿

cutcom_data.cutcom_mode = UF_PATH_CUTCOM_OFF;
UF_PATH_create_cutcom( path_id, &cutcom_data, NULL );