Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base. More...

Inheritance diagram for NXOpen::Tooling::DieBaseBuilder:

Public Types
enum	AlongDirectionOpt { AlongDirectionOptAlongXDirection, AlongDirectionOptAlongYDirection }
	along direction options. More...

enum	CatalogOpt { CatalogOptDme, CatalogOptFutaba }
	catalog options. More...

enum	DesignToolOption { DesignToolOptionSplit, DesignToolOptionMerge, DesignToolOptionAlign, DesignToolOptionAdjust, DesignToolOptionSave, DesignToolOptionDelete }
	design tool options. More...

enum	DieBaseTypeOpt { DieBaseTypeOptPdw, DieBaseTypeOptSingleDie, DieBaseTypeOptCompoundDie, DieBaseTypeOptDrawDie }
	die bse types options. More...

enum	ParentNodeOpt { ParentNodeOptControl, ParentNodeOptDie, ParentNodeOptSubFirst, ParentNodeOptSubSecond, ParentNodeOptDieBaseFirst }
	parent node options. More...

enum	PlatesNumberOpt { PlatesNumberOptPlateFive, PlatesNumberOptPlateEight, PlatesNumberOptPlateNine, PlatesNumberOptPlateTen, PlatesNumberOptPlateTwelve }
	plates number options. More...

enum	SplitMethod { SplitMethodWholeSubDiebase, SplitMethodSinglePlate }
	split method. More...

enum	Types { TypesStandardDieBase, TypesCustomizeDieBase, TypesDesignTools }
	die base types. More...

Public Member Functions
double	AdjustedPlateLength ()
	Returns the plate length value.

NXOpen::Tooling::DieBaseBuilder::AlongDirectionOpt	AlongDirection ()
	Returns the direction options.

NXOpen::Tooling::DieBaseBuilder::CatalogOpt	Catalog ()
	Returns the die base catalog.

double	Close ()
	Returns the die close status value.

double	DbEdgeDistance ()
	Returns the distance to die base edge.

double	DbRefPointX ()
	Returns the X coordinates of reference point.

double	DbRefPointY ()
	Returns the Y coordinates of reference point.

void	DeleteSelectedDieBase ()
	The action to delete selected die base.

NXOpen::Tooling::DieBaseBuilder::DesignToolOption	DesignToolOpt ()
	Returns the design tool options.

NXOpen::SelectBody *	DieBase ()
	Returns the selected die base.

void	DieBaseData ()
	The action to edit die base data file.

void	DieBaseReg ()
	The action to edit die base register file.

NXOpen::SelectBodyList *	DieBaseToDelete ()
	Returns the selected die base to delete.

NXOpen::Tooling::DieBaseBuilder::DieBaseTypeOpt	DieBaseType ()
	Returns the die base type( progressive die, single die, draw die or compound die).

double	FirstLength ()
	Returns the first section length.

double	GapFirst ()
	Returns the first gap value.

double	GapSecond ()
	Returns the second gap value.

bool	LoadDBOnly ()
	Returns the option whether load die base only or not.

NXString	NewDieBaseName ()
	Returns the new die base part name.

double	OpenDist ()
	Returns the open distance value.

NXOpen::Tooling::DieBaseBuilder::ParentNodeOpt	ParentNode ()
	Returns the parent node.

NXString	ParentPartName ()
	Returns the parent part name.

void	PickArea ()
	The action to pick work area for die base.

void	PickLocation ()
	The action to pick location for die base.

void	PickSplitLocation ()
	The action to pick split location.

double	PlateLength ()
	Returns the plate length value.

NXOpen::Tooling::DieBaseBuilder::PlatesNumberOpt	PlatesNumber ()
	Returns the user defined plates number.

double	PlateWidth ()
	Returns the plate width value.

void	RefPoint ()
	The action to specify the reference point for the die base Created in NX8.0.0.

bool	Rename ()
	Returns the option whether rename the die base or not.

double	SecondLength ()
	Returns the second section length.

NXOpen::SelectPart *	SelectPlateToSplit ()
	Returns the selected die plates.

NXOpen::SelectPart *	SelectSubDieBase ()
	Returns the selected sub die base part.

void	SetAdjustedPlateLength (double adjustedPlateLength)
	Sets the plate length value.

void	SetAlongDirection (NXOpen::Tooling::DieBaseBuilder::AlongDirectionOpt alongDirection)
	Sets the direction options.

void	SetCatalog (NXOpen::Tooling::DieBaseBuilder::CatalogOpt catalog)
	Sets the die base catalog.

void	SetClose (double close)
	Sets the die close status value.

void	SetDbEdgeDistance (double dbEdgeDistance)
	Sets the distance to die base edge.

void	SetDbRefPointX (double dbRefPointX)
	Sets the X coordinates of reference point.

void	SetDbRefPointY (double dbRefPointY)
	Sets the Y coordinates of reference point.

void	SetDesignToolOpt (NXOpen::Tooling::DieBaseBuilder::DesignToolOption designToolOpt)
	Sets the design tool options.

void	SetDieBaseType (NXOpen::Tooling::DieBaseBuilder::DieBaseTypeOpt dieBaseType)
	Sets the die base type( progressive die, single die, draw die or compound die).

void	SetFirstLength (double firstLength)
	Sets the first section length.

void	SetGapFirst (double gapFirst)
	Sets the first gap value.

void	SetGapSecond (double gapSecond)
	Sets the second gap value.

void	SetLoadDBOnly (bool loadDBOnly)
	Sets the option whether load die base only or not.

void	SetNewDieBaseName (const NXString &dieBaseName)
	Sets the new die base part name.

void	SetNewDieBaseName (const char *dieBaseName)
	Sets the new die base part name.

void	SetOpenDist (double openDist)
	Sets the open distance value.

void	SetParentNode (NXOpen::Tooling::DieBaseBuilder::ParentNodeOpt parentNode)
	Sets the parent node.

void	SetParentPartName (const NXString &parentPart)
	Sets the parent part name.

void	SetParentPartName (const char *parentPart)
	Sets the parent part name.

void	SetPlateLength (double plateLength)
	Sets the plate length value.

void	SetPlatesNumber (NXOpen::Tooling::DieBaseBuilder::PlatesNumberOpt platesNumber)
	Sets the user defined plates number.

void	SetPlateWidth (double plateWidth)
	Sets the plate width value.

void	SetRename (bool rename)
	Sets the option whether rename the die base or not.

void	SetSecondLength (double secondLength)
	Sets the second section length.

void	SetSplitGap (double splitGap)
	Sets the split gap value.

void	SetSplitSubSingle (NXOpen::Tooling::DieBaseBuilder::SplitMethod splitSubSingle)
	Sets the split options: whole sub die base or single plate.

void	SetStripTravelDistance (double stripTravelDistance)
	Sets the strip travel distance value.

void	SetType (NXOpen::Tooling::DieBaseBuilder::Types type)
	Sets the die base type.

void	SetXDistanceFirst (double xDistanceFirst)
	Sets the first distance along X value.

void	SetXDistanceSecond (double xDistanceSecond)
	Sets the second distance along X value.

void	SetYDistanceFirst (double yDistanceFirst)
	Sets the first distance along Y value.

void	SetYDistanceSecond (double dySecond)
	Sets the second distance along Y value.

double	SplitGap ()
	Returns the split gap value.

NXOpen::Tooling::DieBaseBuilder::SplitMethod	SplitSubSingle ()
	Returns the split options: whole sub die base or single plate.

double	StripTravelDistance ()
	Returns the strip travel distance value.

NXOpen::Tooling::DieBaseBuilder::Types	Type ()
	Returns the die base type.

double	XDistanceFirst ()
	Returns the first distance along X value.

double	XDistanceSecond ()
	Returns the second distance along X value.

double	YDistanceFirst ()
	Returns the first distance along Y value.

double	YDistanceSecond ()
	Returns the second distance along Y value.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base.

To create a new instance of this class, use Tooling::DieBaseCollection::CreateDieBaseBuilder
Default values.

Property

Value

AlongDirection

AlongXDirection

Catalog

Dme

Close

0

DbEdgeDistance

0

DbRefPointX

0

DbRefPointY

0

DesignToolOpt

Split

DieBaseType

Pdw

FirstLength

0

GapFirst

0

GapSecond

0

LoadDBOnly

0

OpenDist

0

ParentNode

Control

PlateLength

0

PlateWidth

0

PlatesNumber

PlateNine

Rename

0

SecondLength

0

SplitGap

0

SplitSubSingle

WholeSubDiebase

StripTravelDistance

0

Type

StandardDieBase

XDistanceFirst

0

XDistanceSecond

0

YDistanceFirst

0

YDistanceSecond

0

Created in NX8.0.0.

Member Enumeration Documentation

enum NXOpen::Tooling::DieBaseBuilder::AlongDirectionOpt

along direction options.

Enumerator:

AlongDirectionOptAlongXDirection	along X direction
AlongDirectionOptAlongYDirection	along Y direction

enum NXOpen::Tooling::DieBaseBuilder::CatalogOpt

catalog options.

Enumerator:

CatalogOptDme	catalog for DME
CatalogOptFutaba	catalog for FUTABA

enum NXOpen::Tooling::DieBaseBuilder::DesignToolOption

design tool options.

Enumerator:

DesignToolOptionSplit	split sub die base
DesignToolOptionMerge	merge sub die base
DesignToolOptionAlign	align sub die base
DesignToolOptionAdjust	adjust length of sub die base
DesignToolOptionSave	save sub die base as template
DesignToolOptionDelete	delete selected die base

enum NXOpen::Tooling::DieBaseBuilder::DieBaseTypeOpt

die bse types options.

Enumerator:

DieBaseTypeOptPdw	progressive die type
DieBaseTypeOptSingleDie	single die type
DieBaseTypeOptCompoundDie	compound die type
DieBaseTypeOptDrawDie	draw die type

enum NXOpen::Tooling::DieBaseBuilder::ParentNodeOpt

parent node options.

Enumerator:

ParentNodeOptControl	use PDW project's control part as parent part
ParentNodeOptDie	use PDW project's die part as parent part
ParentNodeOptSubFirst	use PDW project's sub-die base as parent part
ParentNodeOptSubSecond	use PDW project's sub-die base as parent part
ParentNodeOptDieBaseFirst	use PDW project's die base part as parent part

enum NXOpen::Tooling::DieBaseBuilder::PlatesNumberOpt

plates number options.

Enumerator:

PlatesNumberOptPlateFive	plates number is 5
PlatesNumberOptPlateEight	plates number is 8
PlatesNumberOptPlateNine	plates number is 9
PlatesNumberOptPlateTen	plates number is 10
PlatesNumberOptPlateTwelve	plates number is 12

enum NXOpen::Tooling::DieBaseBuilder::SplitMethod

split method.

Enumerator:

SplitMethodWholeSubDiebase	select whole sub-diebase
SplitMethodSinglePlate	select single plate

enum NXOpen::Tooling::DieBaseBuilder::Types

die base types.

Enumerator:

TypesStandardDieBase	standard die base
TypesCustomizeDieBase	customize die base
TypesDesignTools	die base design tools

Member Function Documentation

double NXOpen::Tooling::DieBaseBuilder::AdjustedPlateLength ( )

Returns the plate length value.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::AlongDirectionOpt NXOpen::Tooling::DieBaseBuilder::AlongDirection ( )

Returns the direction options.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::CatalogOpt NXOpen::Tooling::DieBaseBuilder::Catalog ( )

Returns the die base catalog.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::Close ( )

Returns the die close status value.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::DbEdgeDistance ( )

Returns the distance to die base edge.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::DbRefPointX ( )

Returns the X coordinates of reference point.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::DbRefPointY ( )

Returns the Y coordinates of reference point.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::DeleteSelectedDieBase ( )

The action to delete selected die base.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::DesignToolOption NXOpen::Tooling::DieBaseBuilder::DesignToolOpt ( )

Returns the design tool options.

Created in NX8.0.0.

License requirements : None

NXOpen::SelectBody* NXOpen::Tooling::DieBaseBuilder::DieBase ( )

Returns the selected die base.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::DieBaseData ( )

The action to edit die base data file.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::DieBaseReg ( )

The action to edit die base register file.

Created in NX8.0.0.

License requirements : None

NXOpen::SelectBodyList* NXOpen::Tooling::DieBaseBuilder::DieBaseToDelete ( )

Returns the selected die base to delete.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::DieBaseTypeOpt NXOpen::Tooling::DieBaseBuilder::DieBaseType ( )

Returns the die base type( progressive die, single die, draw die or compound die).

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::FirstLength ( )

Returns the first section length.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::GapFirst ( )

Returns the first gap value.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::GapSecond ( )

Returns the second gap value.

Created in NX8.0.0.

License requirements : None

bool NXOpen::Tooling::DieBaseBuilder::LoadDBOnly ( )

Returns the option whether load die base only or not.

Created in NX8.0.0.

License requirements : None

NXString NXOpen::Tooling::DieBaseBuilder::NewDieBaseName ( )

Returns the new die base part name.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::OpenDist ( )

Returns the open distance value.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::ParentNodeOpt NXOpen::Tooling::DieBaseBuilder::ParentNode ( )

Returns the parent node.

Created in NX8.0.0.

License requirements : None

NXString NXOpen::Tooling::DieBaseBuilder::ParentPartName ( )

Returns the parent part name.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::PickArea ( )

The action to pick work area for die base.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::PickLocation ( )

The action to pick location for die base.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::PickSplitLocation ( )

The action to pick split location.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::PlateLength ( )

Returns the plate length value.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::PlatesNumberOpt NXOpen::Tooling::DieBaseBuilder::PlatesNumber ( )

Returns the user defined plates number.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::PlateWidth ( )

Returns the plate width value.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::RefPoint ( )

The action to specify the reference point for the die base
Created in NX8.0.0.

License requirements : None

bool NXOpen::Tooling::DieBaseBuilder::Rename ( )

Returns the option whether rename the die base or not.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::SecondLength ( )

Returns the second section length.

Created in NX8.0.0.

License requirements : None

NXOpen::SelectPart* NXOpen::Tooling::DieBaseBuilder::SelectPlateToSplit ( )

Returns the selected die plates.

Created in NX8.0.0.

License requirements : None

NXOpen::SelectPart* NXOpen::Tooling::DieBaseBuilder::SelectSubDieBase ( )

Returns the selected sub die base part.

Created in NX8.0.0.

License requirements : None

void NXOpen::Tooling::DieBaseBuilder::SetAdjustedPlateLength ( double adjustedPlateLength )

Sets the plate length value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

adjustedPlateLength adjustedplatelength

void NXOpen::Tooling::DieBaseBuilder::SetAlongDirection ( NXOpen::Tooling::DieBaseBuilder::AlongDirectionOpt alongDirection )

Sets the direction options.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

alongDirection alongdirection

void NXOpen::Tooling::DieBaseBuilder::SetCatalog ( NXOpen::Tooling::DieBaseBuilder::CatalogOpt catalog )

Sets the die base catalog.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

catalog catalog

void NXOpen::Tooling::DieBaseBuilder::SetClose ( double close )

Sets the die close status value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

close close

void NXOpen::Tooling::DieBaseBuilder::SetDbEdgeDistance ( double dbEdgeDistance )

Sets the distance to die base edge.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dbEdgeDistance dbedgedistance

void NXOpen::Tooling::DieBaseBuilder::SetDbRefPointX ( double dbRefPointX )

Sets the X coordinates of reference point.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dbRefPointX dbrefpointx

void NXOpen::Tooling::DieBaseBuilder::SetDbRefPointY ( double dbRefPointY )

Sets the Y coordinates of reference point.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dbRefPointY dbrefpointy

void NXOpen::Tooling::DieBaseBuilder::SetDesignToolOpt ( NXOpen::Tooling::DieBaseBuilder::DesignToolOption designToolOpt )

Sets the design tool options.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

designToolOpt designtoolopt

void NXOpen::Tooling::DieBaseBuilder::SetDieBaseType ( NXOpen::Tooling::DieBaseBuilder::DieBaseTypeOpt dieBaseType )

Sets the die base type( progressive die, single die, draw die or compound die).

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dieBaseType diebasetype

void NXOpen::Tooling::DieBaseBuilder::SetFirstLength ( double firstLength )

Sets the first section length.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

firstLength firstlength

void NXOpen::Tooling::DieBaseBuilder::SetGapFirst ( double gapFirst )

Sets the first gap value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

gapFirst gapfirst

void NXOpen::Tooling::DieBaseBuilder::SetGapSecond ( double gapSecond )

Sets the second gap value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

gapSecond gapsecond

void NXOpen::Tooling::DieBaseBuilder::SetLoadDBOnly ( bool loadDBOnly )

Sets the option whether load die base only or not.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

loadDBOnly loaddbonly

void NXOpen::Tooling::DieBaseBuilder::SetNewDieBaseName ( const NXString & dieBaseName )

Sets the new die base part name.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dieBaseName Specifies the new die base name

void NXOpen::Tooling::DieBaseBuilder::SetNewDieBaseName ( const char * dieBaseName )

Sets the new die base part name.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dieBaseName Specifies the new die base name

void NXOpen::Tooling::DieBaseBuilder::SetOpenDist ( double openDist )

Sets the open distance value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

openDist opendist

void NXOpen::Tooling::DieBaseBuilder::SetParentNode ( NXOpen::Tooling::DieBaseBuilder::ParentNodeOpt parentNode )

Sets the parent node.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

parentNode parentnode

void NXOpen::Tooling::DieBaseBuilder::SetParentPartName ( const NXString & parentPart )

Sets the parent part name.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

parentPart Specifies the parent part name

void NXOpen::Tooling::DieBaseBuilder::SetParentPartName ( const char * parentPart )

Sets the parent part name.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

parentPart Specifies the parent part name

void NXOpen::Tooling::DieBaseBuilder::SetPlateLength ( double plateLength )

Sets the plate length value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

plateLength platelength

void NXOpen::Tooling::DieBaseBuilder::SetPlatesNumber ( NXOpen::Tooling::DieBaseBuilder::PlatesNumberOpt platesNumber )

Sets the user defined plates number.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

platesNumber platesnumber

void NXOpen::Tooling::DieBaseBuilder::SetPlateWidth ( double plateWidth )

Sets the plate width value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

plateWidth platewidth

void NXOpen::Tooling::DieBaseBuilder::SetRename ( bool rename )

Sets the option whether rename the die base or not.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

rename rename

void NXOpen::Tooling::DieBaseBuilder::SetSecondLength ( double secondLength )

Sets the second section length.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

secondLength secondlength

void NXOpen::Tooling::DieBaseBuilder::SetSplitGap ( double splitGap )

Sets the split gap value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

splitGap splitgap

void NXOpen::Tooling::DieBaseBuilder::SetSplitSubSingle ( NXOpen::Tooling::DieBaseBuilder::SplitMethod splitSubSingle )

Sets the split options: whole sub die base or single plate.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

splitSubSingle splitsubsingle

void NXOpen::Tooling::DieBaseBuilder::SetStripTravelDistance ( double stripTravelDistance )

Sets the strip travel distance value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

stripTravelDistance striptraveldistance

void NXOpen::Tooling::DieBaseBuilder::SetType ( NXOpen::Tooling::DieBaseBuilder::Types type )

Sets the die base type.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

type type

void NXOpen::Tooling::DieBaseBuilder::SetXDistanceFirst ( double xDistanceFirst )

Sets the first distance along X value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

xDistanceFirst xdistancefirst

void NXOpen::Tooling::DieBaseBuilder::SetXDistanceSecond ( double xDistanceSecond )

Sets the second distance along X value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

xDistanceSecond xdistancesecond

void NXOpen::Tooling::DieBaseBuilder::SetYDistanceFirst ( double yDistanceFirst )

Sets the first distance along Y value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

yDistanceFirst ydistancefirst

void NXOpen::Tooling::DieBaseBuilder::SetYDistanceSecond ( double dySecond )

Sets the second distance along Y value.

Created in NX8.0.0.

License requirements : prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")

Parameters

dySecond dysecond

double NXOpen::Tooling::DieBaseBuilder::SplitGap ( )

Returns the split gap value.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::SplitMethod NXOpen::Tooling::DieBaseBuilder::SplitSubSingle ( )

Returns the split options: whole sub die base or single plate.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::StripTravelDistance ( )

Returns the strip travel distance value.

Created in NX8.0.0.

License requirements : None

NXOpen::Tooling::DieBaseBuilder::Types NXOpen::Tooling::DieBaseBuilder::Type ( )

Returns the die base type.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::XDistanceFirst ( )

Returns the first distance along X value.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::XDistanceSecond ( )

Returns the second distance along X value.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::YDistanceFirst ( )

Returns the first distance along Y value.

Created in NX8.0.0.

License requirements : None

double NXOpen::Tooling::DieBaseBuilder::YDistanceSecond ( )

Returns the second distance along Y value.

Created in NX8.0.0.

License requirements : None

The documentation for this class was generated from the following file:

Tooling_DieBaseBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation