Represents a @link Features::PoleSmoothing Features::PoleSmoothing@endlink  builder
 <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePoleSmoothingBuilder  Features::FeatureCollection::CreatePoleSmoothingBuilder @endlink  <br>

Default values. More...

Inheritance diagram for NXOpen::Features::PoleSmoothingBuilder:

Public Member Functions
bool	ApplyConstraintsToAll ()
	Returns the indicator to apply the same constraint to all Created in NX6.0.0.

bool	GetCreateNewCopy ()
	Returns the indicator for creating a new copy.

void	GetSelectedPolesIndex (std::vector< int > &selectedPolesIndex)
	Returns the index of selected poles Created in NX6.0.0.

int	ModificationPercentage ()
	Returns the modification percentage Created in NX6.0.0.

NXOpen::Direction *	MovementVector ()
	Returns the movement direction vector, this is used only when UseSpecificDirection and SetUseSpecificDirection is true.

bool	MoveOnlySelectedPoles ()
	Returns the indicator to move only selected poles Created in NX6.0.0.

int	NumberPolesSelected ()
	Returns the number of poles selected Created in NX6.0.0.

NXOpen::GeometricUtilities::ControlPoleManagerData *	Poles ()
	Returns the selected poles, this is used only when MoveOnlySelectedPoles and SetMoveOnlySelectedPoles is true Created in NX6.0.0.

void	RemoveFeatureParameters (NXOpen::Face *face)
	Removes parameters of a owning feature of a face to be smoothed Created in NX8.0.0.

void	SetApplyConstraintsToAll (bool applyConstraintsToAll)
	Sets the indicator to apply the same constraint to all Created in NX6.0.0.

void	SetCreateNewCopy (bool createNewCopy)
	Sets the indicator for creating a new copy Created in NX6.0.0.

void	SetModificationPercentage (int modificationPercentage)
	Sets the modification percentage Created in NX6.0.0.

void	SetMovementVector (NXOpen::Direction *movementVector)
	Sets the movement direction vector, this is used only when UseSpecificDirection and SetUseSpecificDirection is true.

void	SetMoveOnlySelectedPoles (bool moveOnlySelectedPoles)
	Sets the indicator to move only selected poles Created in NX6.0.0.

void	SetNumberPolesSelected (int numbePolesSelected)
	Sets the number of poles selected Created in NX6.0.0.

void	SetSelectedPolesIndex (const std::vector< int > &selectedPolesIndex)
	Sets the index of selected poles Created in NX6.0.0.

void	SetSmoothingFactor (int smoothingFactor)
	Sets the smoothing factor, the min and max values for this are (1 to 100) Created in NX6.0.0.

void	SetUseSpecificDirection (bool useSpecificDirection)
	Sets the specific moving direction Created in NX6.0.0.

int	SmoothingFactor ()
	Returns the smoothing factor, the min and max values for this are (1 to 100) Created in NX6.0.0.

NXOpen::SelectFace *	TargetFace ()
	Returns the target face Created in NX6.0.0.

NXOpen::GeometricUtilities::Continuity *	UMaxConstraint ()
	Returns the u maximum continuity constraint Created in NX6.0.0.

NXOpen::GeometricUtilities::Continuity *	UMinConstraint ()
	Returns the u minimum continuity constraint Created in NX6.0.0.

bool	UseSpecificDirection ()
	Returns the specific moving direction Created in NX6.0.0.

NXOpen::GeometricUtilities::Continuity *	VMaxConstraint ()
	Returns the v maximum continuity constraint Created in NX6.0.0.

NXOpen::GeometricUtilities::Continuity *	VMinConstraint ()
	Returns the v minimum continuity constraint Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a @link Features::PoleSmoothing Features::PoleSmoothing@endlink  builder
 <br> To create a new instance of this class, use @link Features::FeatureCollection::CreatePoleSmoothingBuilder  Features::FeatureCollection::CreatePoleSmoothingBuilder @endlink  <br>

Default values.

Property

Value

ApplyConstraintsToAll

0

ModificationPercentage

100

MoveOnlySelectedPoles

0

SmoothingFactor

1

UseSpecificDirection

0

Created in NX6.0.0.

Member Function Documentation

bool NXOpen::Features::PoleSmoothingBuilder::ApplyConstraintsToAll ( )

Returns the indicator to apply the same constraint to all
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

bool NXOpen::Features::PoleSmoothingBuilder::GetCreateNewCopy ( )

Returns the indicator for creating a new copy.

Returns: Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

void NXOpen::Features::PoleSmoothingBuilder::GetSelectedPolesIndex ( std::vector< int > & selectedPolesIndex )

Returns the index of selected poles
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

selectedPolesIndex selected poles index

int NXOpen::Features::PoleSmoothingBuilder::ModificationPercentage ( )

Returns the modification percentage
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::Direction* NXOpen::Features::PoleSmoothingBuilder::MovementVector ( )

Returns the movement direction vector, this is used only when UseSpecificDirection and SetUseSpecificDirection is true.

Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

bool NXOpen::Features::PoleSmoothingBuilder::MoveOnlySelectedPoles ( )

Returns the indicator to move only selected poles
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

int NXOpen::Features::PoleSmoothingBuilder::NumberPolesSelected ( )

Returns the number of poles selected
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::GeometricUtilities::ControlPoleManagerData* NXOpen::Features::PoleSmoothingBuilder::Poles ( )

Returns the selected poles, this is used only when MoveOnlySelectedPoles and SetMoveOnlySelectedPoles is true
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

void NXOpen::Features::PoleSmoothingBuilder::RemoveFeatureParameters ( NXOpen::Face * face )

Removes parameters of a owning feature of a face to be smoothed
Created in NX8.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

face	Face to be used for feature parameter removal

void NXOpen::Features::PoleSmoothingBuilder::SetApplyConstraintsToAll ( bool applyConstraintsToAll )

Sets the indicator to apply the same constraint to all
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

applyConstraintsToAll applyconstraintstoall

void NXOpen::Features::PoleSmoothingBuilder::SetCreateNewCopy ( bool createNewCopy )

Sets the indicator for creating a new copy
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

createNewCopy createnewcopy

void NXOpen::Features::PoleSmoothingBuilder::SetModificationPercentage ( int modificationPercentage )

Sets the modification percentage
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

modificationPercentage modificationpercentage

void NXOpen::Features::PoleSmoothingBuilder::SetMovementVector ( NXOpen::Direction * movementVector )

Sets the movement direction vector, this is used only when UseSpecificDirection and SetUseSpecificDirection is true.

Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

movementVector movementvector

void NXOpen::Features::PoleSmoothingBuilder::SetMoveOnlySelectedPoles ( bool moveOnlySelectedPoles )

Sets the indicator to move only selected poles
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

moveOnlySelectedPoles moveonlyselectedpoles

void NXOpen::Features::PoleSmoothingBuilder::SetNumberPolesSelected ( int numbePolesSelected )

Sets the number of poles selected
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

numbePolesSelected numbepolesselected

void NXOpen::Features::PoleSmoothingBuilder::SetSelectedPolesIndex ( const std::vector< int > & selectedPolesIndex )

Sets the index of selected poles
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

selectedPolesIndex selected poles index

void NXOpen::Features::PoleSmoothingBuilder::SetSmoothingFactor ( int smoothingFactor )

Sets the smoothing factor, the min and max values for this are (1 to 100)
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

smoothingFactor smoothingfactor

void NXOpen::Features::PoleSmoothingBuilder::SetUseSpecificDirection ( bool useSpecificDirection )

Sets the specific moving direction
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

Parameters

useSpecificDirection usespecificdirection

int NXOpen::Features::PoleSmoothingBuilder::SmoothingFactor ( )

Returns the smoothing factor, the min and max values for this are (1 to 100)
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::SelectFace* NXOpen::Features::PoleSmoothingBuilder::TargetFace ( )

Returns the target face
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::GeometricUtilities::Continuity* NXOpen::Features::PoleSmoothingBuilder::UMaxConstraint ( )

Returns the u maximum continuity constraint
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::GeometricUtilities::Continuity* NXOpen::Features::PoleSmoothingBuilder::UMinConstraint ( )

Returns the u minimum continuity constraint
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

bool NXOpen::Features::PoleSmoothingBuilder::UseSpecificDirection ( )

Returns the specific moving direction
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::GeometricUtilities::Continuity* NXOpen::Features::PoleSmoothingBuilder::VMaxConstraint ( )

Returns the v maximum continuity constraint
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

NXOpen::GeometricUtilities::Continuity* NXOpen::Features::PoleSmoothingBuilder::VMinConstraint ( )

Returns the v minimum continuity constraint
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")

The documentation for this class was generated from the following file:

Features_PoleSmoothingBuilder.hxx

Public Member Functions

Detailed Description

Member Function Documentation