Represents the chamfer builder data. More...

Inheritance diagram for NXOpen::Features::ChamferBuilder:

Public Types
enum	ChamferOption { ChamferOptionSymmetricOffsets, ChamferOptionTwoOffsets, ChamferOptionOffsetAndAngle }
	This enum represents the chamfer parameter options. More...

enum	OffsetMethod { OffsetMethodEdgesAlongFaces, OffsetMethodFacesAndTrim }
	This enum represents the offset method options. More...

Public Member Functions
bool	AllInstances ()
	Returns the chamfer all instance status Created in NX4.0.0.

NXString	Angle ()
	Returns the chamfer angle (expression).

NXOpen::Expression *	AngleExp ()
	Returns the angle expression object of chamfer.

int	CreatePreview ()
	Creates the chamfer preview body.

NXString	FirstOffset ()
	Returns the first offset distance (expression).

NXOpen::Expression *	FirstOffsetExp ()
	Returns the first offset expression object of chamfer.

NXOpen::Features::ChamferBuilder::OffsetMethod	Method ()
	Returns the offset method.

NXOpen::Features::ChamferBuilder::ChamferOption	Option ()
	Returns the chamfer parameter option.

bool	ReverseOffsets ()
	Returns the offset reverse status Created in NX4.0.0.

NXString	SecondOffset ()
	Returns the second offset distance (expression).

NXOpen::Expression *	SecondOffsetExp ()
	Returns the second offset expression object of chamfer.

void	SetAllInstances (bool allInstances)
	Sets the chamfer all instance status Created in NX4.0.0.

void	SetAngle (const NXString &angleExpression)
	Sets the chamfer angle (expression).

void	SetAngle (const char *angleExpression)
	Sets the chamfer angle (expression).

void	SetFirstOffset (const NXString &offsetExpression)
	Sets the first offset distance (expression).

void	SetFirstOffset (const char *offsetExpression)
	Sets the first offset distance (expression).

void	SetMethod (NXOpen::Features::ChamferBuilder::OffsetMethod method)
	Sets the offset method.

void	SetOption (NXOpen::Features::ChamferBuilder::ChamferOption opt)
	Sets the chamfer parameter option.

void	SetReverseOffsets (bool reverse)
	Sets the offset reverse status Created in NX4.0.0.

void	SetSecondOffset (const NXString &offsetExpression)
	Sets the second offset distance (expression).

void	SetSecondOffset (const char *offsetExpression)
	Sets the second offset distance (expression).

void	SetSmartCollector (NXOpen::ScCollector *sc)
	Sets the smart collector Created in NX4.0.0.

void	SetTolerance (double tolerance)
	Sets the tolerance used for creating chamfer Created in NX6.0.0.

NXOpen::ScCollector *	SmartCollector ()
	Returns the smart collector Created in NX4.0.0.

double	Tolerance ()
	Returns the tolerance used for creating chamfer Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.

NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.

void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.

bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.

NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.

void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.

void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.

void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.

void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.

void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.

NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.

void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the chamfer builder data.

To create a new instance of this class, use Features::FeatureCollection::CreateChamferBuilder

Created in NX4.0.0.

Member Enumeration Documentation

enum NXOpen::Features::ChamferBuilder::ChamferOption

This enum represents the chamfer parameter options.

Enumerator:

ChamferOptionSymmetricOffsets	Symmetric offsets.
ChamferOptionTwoOffsets	Two offset distances.
ChamferOptionOffsetAndAngle	Offset distance and angle.

enum NXOpen::Features::ChamferBuilder::OffsetMethod

This enum represents the offset method options.

Enumerator:

OffsetMethodEdgesAlongFaces	Offset edges along faces.
OffsetMethodFacesAndTrim	Offset faces and trim.

Member Function Documentation

bool NXOpen::Features::ChamferBuilder::AllInstances ( )

Returns the chamfer all instance status
Created in NX4.0.0.

License requirements : None

NXString NXOpen::Features::ChamferBuilder::Angle ( )

Returns the chamfer angle (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::AngleExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ChamferBuilder::AngleExp ( )

Returns the angle expression object of chamfer.

Created in NX5.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

int NXOpen::Features::ChamferBuilder::CreatePreview ( )

Creates the chamfer preview body.

Returns: Parasolid body
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

NXString NXOpen::Features::ChamferBuilder::FirstOffset ( )

Returns the first offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::FirstOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ChamferBuilder::FirstOffsetExp ( )

Returns the first offset expression object of chamfer.

Created in NX5.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

NXOpen::Features::ChamferBuilder::OffsetMethod NXOpen::Features::ChamferBuilder::Method ( )

Returns the offset method.

Features::ChamferBuilder::OffsetMethodEdgesAlongFaces Features::ChamferBuilder::OffsetMethodFacesAndTrim
The EdgesAlongFaces method is the normal chamfer in which the chamfer boundary is determined by offsetting the input edges along its adjacent faces. The FacesAndTrim method is the free-form chamfer in which the chamfer boundary is determined by offsetting the adjacent faces of the input edges, using the chamfer parameters in either case.

Created in NX4.0.0.

License requirements : None

NXOpen::Features::ChamferBuilder::ChamferOption NXOpen::Features::ChamferBuilder::Option ( )

Returns the chamfer parameter option.

    <br> 
      @link Features::ChamferBuilder::ChamferOptionSymmetricOffsets Features::ChamferBuilder::ChamferOptionSymmetricOffsets@endlink 
      @link Features::ChamferBuilder::ChamferOptionTwoOffsets Features::ChamferBuilder::ChamferOptionTwoOffsets@endlink 
      @link Features::ChamferBuilder::ChamferOptionOffsetAndAngle Features::ChamferBuilder::ChamferOptionOffsetAndAngle@endlink 
    <br> 
   Each of these options correspond to a chamfer defined by two equal 
   offset distances, two unequal offset distances, an offset distance
   and angle respectively.

Created in NX4.0.0.

License requirements : None

bool NXOpen::Features::ChamferBuilder::ReverseOffsets ( )

Returns the offset reverse status
Created in NX4.0.0.

License requirements : None

NXString NXOpen::Features::ChamferBuilder::SecondOffset ( )

Returns the second offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::SecondOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::ChamferBuilder::SecondOffsetExp ( )

Returns the second offset expression object of chamfer.

Created in NX5.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

void NXOpen::Features::ChamferBuilder::SetAllInstances ( bool allInstances )

Sets the chamfer all instance status
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

allInstances all instances

void NXOpen::Features::ChamferBuilder::SetAngle ( const NXString & angleExpression )

Sets the chamfer angle (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::AngleExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

angleExpression angle expression

void NXOpen::Features::ChamferBuilder::SetAngle ( const char * angleExpression )

Sets the chamfer angle (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::AngleExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

angleExpression angle expression

void NXOpen::Features::ChamferBuilder::SetFirstOffset ( const NXString & offsetExpression )

Sets the first offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::FirstOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

offsetExpression offset expression

void NXOpen::Features::ChamferBuilder::SetFirstOffset ( const char * offsetExpression )

Sets the first offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::FirstOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

offsetExpression offset expression

void NXOpen::Features::ChamferBuilder::SetMethod ( NXOpen::Features::ChamferBuilder::OffsetMethod method )

Sets the offset method.

Features::ChamferBuilder::OffsetMethodEdgesAlongFaces Features::ChamferBuilder::OffsetMethodFacesAndTrim
The EdgesAlongFaces method is the normal chamfer in which the chamfer boundary is determined by offsetting the input edges along its adjacent faces. The FacesAndTrim method is the free-form chamfer in which the chamfer boundary is determined by offsetting the adjacent faces of the input edges, using the chamfer parameters in either case.

Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

method method

void NXOpen::Features::ChamferBuilder::SetOption ( NXOpen::Features::ChamferBuilder::ChamferOption opt )

Sets the chamfer parameter option.

    <br> 
      @link Features::ChamferBuilder::ChamferOptionSymmetricOffsets Features::ChamferBuilder::ChamferOptionSymmetricOffsets@endlink 
      @link Features::ChamferBuilder::ChamferOptionTwoOffsets Features::ChamferBuilder::ChamferOptionTwoOffsets@endlink 
      @link Features::ChamferBuilder::ChamferOptionOffsetAndAngle Features::ChamferBuilder::ChamferOptionOffsetAndAngle@endlink 
    <br> 
   Each of these options correspond to a chamfer defined by two equal 
   offset distances, two unequal offset distances, an offset distance
   and angle respectively.

Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

opt opt

void NXOpen::Features::ChamferBuilder::SetReverseOffsets ( bool reverse )

Sets the offset reverse status
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

reverse reverse

void NXOpen::Features::ChamferBuilder::SetSecondOffset ( const NXString & offsetExpression )

Sets the second offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::SecondOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

offsetExpression offset expression

void NXOpen::Features::ChamferBuilder::SetSecondOffset ( const char * offsetExpression )

Sets the second offset distance (expression).

Please do not use this property to access/modify the Features::ChamferBuilder::SecondOffsetExp . This might be removed from KF bindings in NX 9.
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

offsetExpression offset expression

void NXOpen::Features::ChamferBuilder::SetSmartCollector ( NXOpen::ScCollector * sc )

Sets the smart collector
Created in NX4.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

sc sc

void NXOpen::Features::ChamferBuilder::SetTolerance ( double tolerance )

Sets the tolerance used for creating chamfer
Created in NX6.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

tolerance tolerance

NXOpen::ScCollector* NXOpen::Features::ChamferBuilder::SmartCollector ( )

Returns the smart collector
Created in NX4.0.0.

License requirements : None

double NXOpen::Features::ChamferBuilder::Tolerance ( )

Returns the tolerance used for creating chamfer
Created in NX6.0.0.

License requirements : None

The documentation for this class was generated from the following file:

Features_ChamferBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation