NXOpen::Features::AnalyzePocketBuilder Class Reference

Represents a Features::AnalyzePocket builder for Analyze Pocket feature. More...

Inheritance diagram for NXOpen::Features::AnalyzePocketBuilder:

Public Types
enum	AngledWallSolutions {   AngledWallSolutionsUnknown, AngledWallSolutionsSwarfCutWall, AngledWallSolutionsCutFloorAndSwarfCutWall, AngledWallSolutionsCutFloor,   AngledWallSolutionsSwarfCutWallAndFloor }
	Represents the solution which defines how the End Mill is positioned with the angled walls. More...
enum	ToolTypes { ToolTypesUnknown, ToolTypesEndMill, ToolTypesTCutter, ToolTypesSphericalMill }
	Represents the tool type which defines how the angled walls are cut. More...

Public Member Functions
bool	AcutelyAngledWallsChecker ()
	Returns the flag specifying whether to check acutely angled walls.
NXOpen::Expression *	Diameter ()
	Returns the diameter defines the diameter of End Mill or Shperical Mill.
NXOpen::ScCollector *	FloorFaces ()
	Returns the collector of floor faces.
NXOpen::Expression *	FluteLength ()
	Returns the flute length defines the length of the flute of T Cutter.
bool	InaccessibleAreasChecker ()
	Returns the flag specifying whether to check inaccessible areas.
NXOpen::Expression *	LowerRadius ()
	Returns the lower radius defines the radius of blend on the bottom of End Mill or T Cutter.
NXOpen::Expression *	NeckDiameter ()
	Returns the neck diameter defines the diameter of the neck of T Cutter.
void	SetAcutelyAngledWallsChecker (bool acutelyAngledWallsChecker)
	Sets the flag specifying whether to check acutely angled walls.
void	SetFloorFaces (NXOpen::ScCollector *floorFaces)
	Sets the collector of floor faces.
void	SetInaccessibleAreasChecker (bool inaccessibleAreasChecker)
	Sets the flag specifying whether to check inaccessible areas.
void	SetToolType (NXOpen::Features::AnalyzePocketBuilder::ToolTypes toolType)
	Sets the tool type defines how the angled walls are cut.
void	SetUndercutsChecker (bool undercutsChecker)
	Sets the flag specifying whether to check undercuts.
void	SetWallFaces (NXOpen::ScCollector *wallFaces)
	Sets the collector of wall faces.
NXOpen::Features::AnalyzePocketBuilder::ToolTypes	ToolType ()
	Returns the tool type defines how the angled walls are cut.
bool	UndercutsChecker ()
	Returns the flag specifying whether to check undercuts.
NXOpen::Expression *	UpperRadius ()
	Returns the upper radius defines the radius of blend on the upper part of T Cutter.
NXOpen::ScCollector *	WallFaces ()
	Returns the collector of wall faces.
Public Member Functions inherited from NXOpen::Features::FeatureBuilder
NXOpen::Features::Feature *	CommitFeature ()
	Commits the feature parameters and creates the feature.
NXOpen::Features::Feature *	GetFeature ()
	Returns the feature currently being edited by this builder.
void	HideInternalParentFeatureAfterEdit (NXOpen::Features::Feature *parentFeature)
	Re-suppress an internal parent feature (a slave feature) after it has been edited.
bool	ParentFeatureInternal ()
	Returns whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
bool	PatchSolutionFlag ()
	Returns the patch solution flag Created in NX8.0.1.
NXString	PatchSurfaceFilename ()
	Returns the patch surface filename Created in NX8.0.1.
void	SetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the parent features which would be internal or slaves to the feature being created or commited Created in NX6.0.0.
void	SetParentFeatureInternal (bool isInternal)
	Sets whether or not the latest timestamped parent feature of this feature should be made internal Created in NX5.0.0.
void	SetPatchSolutionFlag (bool optionValue)
	Sets the patch solution flag Created in NX8.0.1.
void	SetPatchSurfaceFilename (const NXString &surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetPatchSurfaceFilename (const char *surfaceFilename)
	Sets the patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const NXString &surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	SetSurroundingPatchSurfaceFilename (const char *surroundingSurfaceFilename)
	Sets the surrounding patch surface filename Created in NX8.0.1.
void	ShowInternalParentFeatureForEdit (NXOpen::Features::Feature *parentFeature)
	Unsuppress an internal parent feature (a slave feature) so it can be edited.
NXString	SurroundingPatchSurfaceFilename ()
	Returns the surrounding patch surface filename Created in NX8.0.1.
void	UnsetParentFeatureInternal (NXOpen::Features::Feature *parentFeature)
	Set the internal parent feature of the feature being edited to external Created in NX6.0.0.
Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.
void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.
std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.
NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.
void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.
virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.
Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br>    Use Tag instead.
tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a Features::AnalyzePocket builder for Analyze Pocket feature.

To create a new instance of this class, use Features::FeatureCollection::CreateAnalyzePocketBuilder
Default values.

Property	Value
AcutelyAngledWallsChecker	True
Diameter.Value	25.0 (millimeters part), 1.0 (inches part)
FluteLength.Value	10.0 (millimeters part), 0.38 (inches part)
InaccessibleAreasChecker	True
LowerRadius.Value	5.0 (millimeters part), 0.25 (inches part)
NeckDiameter.Value	25.0 (millimeters part), 1.0 (inches part)
ToolType	EndMill
UndercutsChecker	True
UpperRadius.Value	5.0 (millimeters part), 0.25 (inches part)

Created in NX9.0.0.

Member Enumeration Documentation

enum NXOpen::Features::AnalyzePocketBuilder::AngledWallSolutions

Represents the solution which defines how the End Mill is positioned with the angled walls.

Enumerator:

AngledWallSolutionsUnknown	Unknown End Mill solution.
AngledWallSolutionsSwarfCutWall	One pass End Mill. The tool is following the angled wall and not perpendicular to the pocket floor.
AngledWallSolutionsCutFloorAndSwarfCutWall	Two pass End Mill. During first pass you keep the tool perpendicular to the pocket floor and during second pass you follow the angled wall.
AngledWallSolutionsCutFloor	One pass End Mill. The tool is perpendicular to the pocket floor and not follow the angled wall.
AngledWallSolutionsSwarfCutWallAndFloor	Two pass End Mill. During first pass you follow the angled wall and during second pass you rotate the tool to follow the floor.

enum NXOpen::Features::AnalyzePocketBuilder::ToolTypes

Represents the tool type which defines how the angled walls are cut.

Enumerator:

ToolTypesUnknown	unknown.
ToolTypesEndMill	End Mill.
ToolTypesTCutter	T Cutter.
ToolTypesSphericalMill	Spherical Mill.

Member Function Documentation

bool NXOpen::Features::AnalyzePocketBuilder::AcutelyAngledWallsChecker

(

)

Returns the flag specifying whether to check acutely angled walls.

If True, check the acutely angled walls, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

NXOpen::Expression* NXOpen::Features::AnalyzePocketBuilder::Diameter

(

)

Returns the diameter defines the diameter of End Mill or Shperical Mill.

Created in NX9.0.0.

License requirements : None

NXOpen::ScCollector* NXOpen::Features::AnalyzePocketBuilder::FloorFaces

(

)

Returns the collector of floor faces.

It can be a single face, or multiple faces
Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::AnalyzePocketBuilder::FluteLength

(

)

Returns the flute length defines the length of the flute of T Cutter.

Created in NX9.0.0.

License requirements : None

bool NXOpen::Features::AnalyzePocketBuilder::InaccessibleAreasChecker

(

)

Returns the flag specifying whether to check inaccessible areas.

If True, check the inaccessible areas, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

NXOpen::Expression* NXOpen::Features::AnalyzePocketBuilder::LowerRadius

(

)

Returns the lower radius defines the radius of blend on the bottom of End Mill or T Cutter.

Created in NX9.0.0.

License requirements : None

NXOpen::Expression* NXOpen::Features::AnalyzePocketBuilder::NeckDiameter

(

)

Returns the neck diameter defines the diameter of the neck of T Cutter.

Created in NX9.0.0.

License requirements : None

void NXOpen::Features::AnalyzePocketBuilder::SetAcutelyAngledWallsChecker

(

bool

acutelyAngledWallsChecker

)

Sets the flag specifying whether to check acutely angled walls.

If True, check the acutely angled walls, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

acutelyAngledWallsChecker

acutely angled walls checker

void NXOpen::Features::AnalyzePocketBuilder::SetFloorFaces

(

NXOpen::ScCollector *

floorFaces

)

Sets the collector of floor faces.

It can be a single face, or multiple faces
Created in NX9.0.0.

License requirements : None

Parameters

floorFaces

floor faces

void NXOpen::Features::AnalyzePocketBuilder::SetInaccessibleAreasChecker

(

bool

inaccessibleAreasChecker

)

Sets the flag specifying whether to check inaccessible areas.

If True, check the inaccessible areas, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

inaccessibleAreasChecker

inaccessible areas checker

void NXOpen::Features::AnalyzePocketBuilder::SetToolType

(

NXOpen::Features::AnalyzePocketBuilder::ToolTypes

toolType

)

Sets the tool type defines how the angled walls are cut.

Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

toolType

tool type

void NXOpen::Features::AnalyzePocketBuilder::SetUndercutsChecker

(

bool

undercutsChecker

)

Sets the flag specifying whether to check undercuts.

If True, check the undercuts, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

Parameters

undercutsChecker

undercuts checker

void NXOpen::Features::AnalyzePocketBuilder::SetWallFaces

(

NXOpen::ScCollector *

wallFaces

)

Sets the collector of wall faces.

It can be a single face, or multiple faces
Created in NX9.0.0.

License requirements : None

Parameters

wallFaces

wall faces

NXOpen::Features::AnalyzePocketBuilder::ToolTypes NXOpen::Features::AnalyzePocketBuilder::ToolType

(

)

Returns the tool type defines how the angled walls are cut.

Created in NX9.0.0.

License requirements : None

bool NXOpen::Features::AnalyzePocketBuilder::UndercutsChecker

(

)

Returns the flag specifying whether to check undercuts.

If True, check the undercuts, else it is not.
Created in NX9.0.0.

License requirements : solid_modeling ("SOLIDS MODELING")

NXOpen::Expression* NXOpen::Features::AnalyzePocketBuilder::UpperRadius

(

)

Returns the upper radius defines the radius of blend on the upper part of T Cutter.

Created in NX9.0.0.

License requirements : None

NXOpen::ScCollector* NXOpen::Features::AnalyzePocketBuilder::WallFaces

(

)

Returns the collector of wall faces.

It can be a single face, or multiple faces
Created in NX9.0.0.

License requirements : None

---

The documentation for this class was generated from the following file:

• Features_AnalyzePocketBuilder.hxx