Represents a CAM::ProbeControlParametersBuilder. More...

Inheritance diagram for NXOpen::CAM::ProbeControlParametersBuilder:

Public Types
enum	AdjustmentTypes { AdjustmentTypesNone, AdjustmentTypesXy, AdjustmentTypesXyz, AdjustmentTypesContact }
	the output adjustment method types More...

enum	PrintType { PrintTypeNone, PrintTypeFeature, PrintTypeComponent }
	the print type flag More...

Public Member Functions
NXOpen::CAM::ProbeControlParametersBuilder::AdjustmentTypes	Adjustment ()
	Returns the output adjustment option Created in NX5.0.0.

int	Experience ()
	Returns the experience value location Created in NX5.0.0.

bool	OutputExperience ()
	Returns the option to output the experience value location Created in NX5.0.0.

bool	OutputOvertravel ()
	Returns the option to output the probe overtravel distance Created in NX5.0.0.

bool	OutputPercentFeedback ()
	Returns the option to output the percent feedback Created in NX5.0.0.

bool	OutputToolOffset ()
	Returns the option to output the tool offset to update Created in NX5.0.0.

bool	OutputWorkOffset ()
	Returns the option to output the work offset to update Created in NX5.0.0.

double	Overtravel ()
	Returns the probe overtravel distance Created in NX5.0.0.

double	PercentFeedback ()
	Returns the percent feedback Created in NX5.0.0.

NXOpen::CAM::ProbeControlParametersBuilder::PrintType	Print ()
	Returns the print option Created in NX5.0.0.

void	SetAdjustment (NXOpen::CAM::ProbeControlParametersBuilder::AdjustmentTypes newValue)
	Sets the output adjustment option Created in NX5.0.0.

void	SetExperience (int experience)
	Sets the experience value location Created in NX5.0.0.

void	SetOutputExperience (bool newValue)
	Sets the option to output the experience value location Created in NX5.0.0.

void	SetOutputOvertravel (bool newValue)
	Sets the option to output the probe overtravel distance Created in NX5.0.0.

void	SetOutputPercentFeedback (bool newValue)
	Sets the option to output the percent feedback Created in NX5.0.0.

void	SetOutputToolOffset (bool newValue)
	Sets the option to output the tool offset to update Created in NX5.0.0.

void	SetOutputWorkOffset (bool newValue)
	Sets the option to output the work offset to update Created in NX5.0.0.

void	SetOvertravel (double overtravel)
	Sets the probe overtravel distance Created in NX5.0.0.

void	SetPercentFeedback (double percentFeedback)
	Sets the percent feedback Created in NX5.0.0.

void	SetPrint (NXOpen::CAM::ProbeControlParametersBuilder::PrintType newValue)
	Sets the print option Created in NX5.0.0.

void	SetToolOffset (int toolOffset)
	Sets the tool offset to update Created in NX5.0.0.

void	SetWorkOffset (int workOffset)
	Sets the work offset to update Created in NX5.0.0.

int	ToolOffset ()
	Returns the tool offset to update Created in NX5.0.0.

int	WorkOffset ()
	Returns the work offset to update Created in NX5.0.0.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a CAM::ProbeControlParametersBuilder.

Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::ProbeControlParametersBuilder::AdjustmentTypes

the output adjustment method types

Enumerator:

AdjustmentTypesNone	None.
AdjustmentTypesXy	XY Calibration.
AdjustmentTypesXyz	XY Calibration and Z.
AdjustmentTypesContact	Contact Point.

enum NXOpen::CAM::ProbeControlParametersBuilder::PrintType

the print type flag

Enumerator:

PrintTypeNone	None.
PrintTypeFeature	Increment feature.
PrintTypeComponent	Increment component.

Member Function Documentation

NXOpen::CAM::ProbeControlParametersBuilder::AdjustmentTypes NXOpen::CAM::ProbeControlParametersBuilder::Adjustment ( )

Returns the output adjustment option
Created in NX5.0.0.

License requirements : None

int NXOpen::CAM::ProbeControlParametersBuilder::Experience ( )

Returns the experience value location
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::ProbeControlParametersBuilder::OutputExperience ( )

Returns the option to output the experience value location
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::ProbeControlParametersBuilder::OutputOvertravel ( )

Returns the option to output the probe overtravel distance
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::ProbeControlParametersBuilder::OutputPercentFeedback ( )

Returns the option to output the percent feedback
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::ProbeControlParametersBuilder::OutputToolOffset ( )

Returns the option to output the tool offset to update
Created in NX5.0.0.

License requirements : None

bool NXOpen::CAM::ProbeControlParametersBuilder::OutputWorkOffset ( )

Returns the option to output the work offset to update
Created in NX5.0.0.

License requirements : None

double NXOpen::CAM::ProbeControlParametersBuilder::Overtravel ( )

Returns the probe overtravel distance
Created in NX5.0.0.

License requirements : None

double NXOpen::CAM::ProbeControlParametersBuilder::PercentFeedback ( )

Returns the percent feedback
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::ProbeControlParametersBuilder::PrintType NXOpen::CAM::ProbeControlParametersBuilder::Print ( )

Returns the print option
Created in NX5.0.0.

License requirements : None

void NXOpen::CAM::ProbeControlParametersBuilder::SetAdjustment ( NXOpen::CAM::ProbeControlParametersBuilder::AdjustmentTypes newValue )

Sets the output adjustment option
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetExperience ( int experience )

Sets the experience value location
Created in NX5.0.0.

License requirements : None

Parameters

experience experience

void NXOpen::CAM::ProbeControlParametersBuilder::SetOutputExperience ( bool newValue )

Sets the option to output the experience value location
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetOutputOvertravel ( bool newValue )

Sets the option to output the probe overtravel distance
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetOutputPercentFeedback ( bool newValue )

Sets the option to output the percent feedback
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetOutputToolOffset ( bool newValue )

Sets the option to output the tool offset to update
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetOutputWorkOffset ( bool newValue )

Sets the option to output the work offset to update
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetOvertravel ( double overtravel )

Sets the probe overtravel distance
Created in NX5.0.0.

License requirements : None

Parameters

overtravel overtravel

void NXOpen::CAM::ProbeControlParametersBuilder::SetPercentFeedback ( double percentFeedback )

Sets the percent feedback
Created in NX5.0.0.

License requirements : None

Parameters

percentFeedback percent feedback

void NXOpen::CAM::ProbeControlParametersBuilder::SetPrint ( NXOpen::CAM::ProbeControlParametersBuilder::PrintType newValue )

Sets the print option
Created in NX5.0.0.

License requirements : None

Parameters

newValue newvalue

void NXOpen::CAM::ProbeControlParametersBuilder::SetToolOffset ( int toolOffset )

Sets the tool offset to update
Created in NX5.0.0.

License requirements : None

Parameters

toolOffset tool offset

void NXOpen::CAM::ProbeControlParametersBuilder::SetWorkOffset ( int workOffset )

Sets the work offset to update
Created in NX5.0.0.

License requirements : None

Parameters

workOffset work offset

int NXOpen::CAM::ProbeControlParametersBuilder::ToolOffset ( )

Returns the tool offset to update
Created in NX5.0.0.

License requirements : None

int NXOpen::CAM::ProbeControlParametersBuilder::WorkOffset ( )

Returns the work offset to update
Created in NX5.0.0.

License requirements : None

The documentation for this class was generated from the following file:

CAM_ProbeControlParametersBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation