Represents Retract settings for laser non cutting moves
Created in NX9.0.0. More...

Inheritance diagram for NXOpen::CAM::NcmLaserRetract:

Public Types
enum	Type { TypeLinearRelToCut, TypeArc }
	the Retract Type enum Created in NX9.0.0. More...

Public Member Functions
NXOpen::CAM::InheritableDoubleBuilder *	ArcAngle ()
	Returns the Arc Angle Created in NX9.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	ExtendDistance ()
	Returns the Extend Distance Created in NX9.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	Length ()
	Returns the Length Created in NX9.0.0.

NXOpen::CAM::InheritableToolDepBuilder *	Radius ()
	Returns the Radius Created in NX9.0.0.

NXOpen::CAM::NcmLaserRetract::Type	RetractType ()
	Returns the Retract Type Created in NX9.0.0.

void	SetRetractType (NXOpen::CAM::NcmLaserRetract::Type type)
	Sets the Retract Type Created in NX9.0.0.

NXOpen::CAM::InheritableDoubleBuilder *	SwingAngle ()
	Returns the Swing Angle Created in NX9.0.0.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents Retract settings for laser non cutting moves
Created in NX9.0.0.

Member Enumeration Documentation

the Retract Type enum
Created in NX9.0.0.

Enumerator:

TypeLinearRelToCut	linear - Relative to Cut
TypeArc	arc

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::NcmLaserRetract::ArcAngle ( )

Returns the Arc Angle
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmLaserRetract::ExtendDistance ( )

Returns the Extend Distance
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmLaserRetract::Length ( )

Returns the Length
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::InheritableToolDepBuilder* NXOpen::CAM::NcmLaserRetract::Radius ( )

Returns the Radius
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::NcmLaserRetract::Type NXOpen::CAM::NcmLaserRetract::RetractType ( )

Returns the Retract Type
Created in NX9.0.0.

License requirements : None

void NXOpen::CAM::NcmLaserRetract::SetRetractType ( NXOpen::CAM::NcmLaserRetract::Type type )

Sets the Retract Type
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

type	the retract type value

NXOpen::CAM::InheritableDoubleBuilder* NXOpen::CAM::NcmLaserRetract::SwingAngle ( )

Returns the Swing Angle
Created in NX9.0.0.

License requirements : None

The documentation for this class was generated from the following file: