Represents a LaserProfileMove
To create a new instance of this class, use CAM::MoveCollection::CreateLaserProfileMove

Created in NX9.0.0. More...

Inheritance diagram for NXOpen::CAM::LaserProfileMove:

Public Types
enum	CollisionChecks { CollisionChecksNone, CollisionChecksNozzleOnly, CollisionChecksNozzleAndHolder, CollisionChecksSolidLaserHead }
	the Collision Check enum Created in NX9.0.0. More...

enum	InterpMethods { InterpMethodsLinear, InterpMethodsCubicSpline, InterpMethodsSmooth }
	the Interpolation Method enum Created in NX9.0.0. More...

enum	ShapeTypes { ShapeTypesExternalTrim, ShapeTypesInternalTrim, ShapeTypesOpenProfile }
	the Shape Type enum Created in NX9.0.0. More...

enum	ToolSides { ToolSidesOn, ToolSidesLeft, ToolSidesRight }
	the Tool Side enum Created in NX9.0.0. More...

Public Types inherited from NXOpen::CAM::MoveBuilder
enum	Feed { FeedMotion, FeedCustom }
	the feed Type More...

enum	Motion { MotionRapid = 1, MotionEngage, MotionCut, MotionStepover, MotionRetract, MotionApproach, MotionTraversal, MotionDeparture, MotionReturn, MotionFirstCut }
	the motion Type More...

Public Member Functions
NXOpen::CAM::LaserProfileMove::CollisionChecks	CollisionCheck ()
	Returns the Collision Check Created in NX9.0.0.

NXOpen::CAM::LaserControlPoint *	CreateControlPoint (int headOrientType, NXOpen::Point pointTag, NXOpen::CartesianCoordinateSystem csysTag, int processType, bool toggle, NXOpen::NXObject *udePathTag, int pointType)
	Create a new Laser Control Point.

NXOpen::CAM::LaserCutDirection *	CutDirection ()
	Returns the Cut Direction Created in NX9.0.0.

NXOpen::CAM::LaserHeadOrientation *	HeadOrientation ()
	Returns the Head Orientation Created in NX9.0.0.

NXOpen::CAM::LaserProfileMove::InterpMethods	InterpMethod ()
	Returns the Interpolation Method Created in NX9.0.0.

NXOpen::CAM::LaserControlPointList *	List ()
	Returns the List Created in NX9.0.0.

double	MaxGapDist ()
	Returns the Max Gap Distance Created in NX9.0.0.

double	MaxTiltAngle ()
	Returns the Max Tilt Angle Created in NX9.0.0.

NXOpen::Section *	ProfileSection ()
	Returns the Profile Section Created in NX9.0.0.

void	SetCollisionCheck (NXOpen::CAM::LaserProfileMove::CollisionChecks type)
	Sets the Collision Check Created in NX9.0.0.

void	SetInterpMethod (NXOpen::CAM::LaserProfileMove::InterpMethods type)
	Sets the Interpolation Method Created in NX9.0.0.

void	SetMaxGapDist (double newValue)
	Sets the Max Gap Distance Created in NX9.0.0.

void	SetMaxTiltAngle (double newValue)
	Sets the Max Tilt Angle Created in NX9.0.0.

void	SetProfileSection (NXOpen::Section *profileSection)
	Sets the Profile Section Created in NX9.0.0.

void	SetShapeType (NXOpen::CAM::LaserProfileMove::ShapeTypes type)
	Sets the Shape Type Created in NX9.0.0.

void	SetToolSide (NXOpen::CAM::LaserProfileMove::ToolSides type)
	Sets the Tool Side Created in NX9.0.0.

NXOpen::CAM::LaserProfileMove::ShapeTypes	ShapeType ()
	Returns the Shape Type Created in NX9.0.0.

NXOpen::CAM::LaserProfileMove::ToolSides	ToolSide ()
	Returns the Tool Side Created in NX9.0.0.

Public Member Functions inherited from NXOpen::CAM::MoveBuilder
double	FeedRate ()
	Returns the feed rate Created in NX5.0.0.

NXOpen::CAM::MoveBuilder::Feed	FeedType ()
	Returns the feed type Created in NX5.0.0.

NXOpen::CAM::FeedRateUnit	FeedUnit ()
	Returns the feed unit Created in NX7.5.0.

NXOpen::CAM::UdeParameter *	GetUserParameter (const NXString &parameterName)
	Returns the custom parameter with the given name.

NXOpen::CAM::UdeParameter *	GetUserParameter (const char *parameterName)
	Returns the custom parameter with the given name.

NXOpen::CAM::UdeParameter *	GetUserParameter (int index)
	Returns the parameter at the input index.

NXOpen::CAM::MoveBuilder::Motion	MotionType ()
	Returns the motion type Created in NX5.0.0.

int	NumberOfUserParameters ()
	Returns the number of user parameters Created in NX8.0.0.

bool	ProtectedMove ()
	Returns the protected move status Created in NX5.0.0.

void	SetFeedRate (double feedRate)
	Sets the feed rate Created in NX5.0.0.

void	SetFeedType (NXOpen::CAM::MoveBuilder::Feed feedType)
	Sets the feed type Created in NX5.0.0.

void	SetFeedUnit (NXOpen::CAM::FeedRateUnit unit)
	Sets the feed unit Created in NX7.5.0.

void	SetMotionType (NXOpen::CAM::MoveBuilder::Motion motionType)
	Sets the motion type Created in NX5.0.0.

void	SetParent (NXOpen::CAM::CAMObject *parent)
	Set parent Created in NX5.0.0.

void	SetProtectedMove (bool protectedMove)
	Sets the protected move status Created in NX5.0.0.

void	SetSibling (NXOpen::CAM::CAMObject *sibling)
	Set sibling Created in NX5.0.0.

void	SetSubopLabel (const NXString &subopLabel)
	Sets the subop label Created in NX8.5.1.

void	SetSubopLabel (const char *subopLabel)
	Sets the subop label Created in NX8.5.1.

NXString	SubopLabel ()
	Returns the subop label Created in NX8.5.1.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents a LaserProfileMove
To create a new instance of this class, use CAM::MoveCollection::CreateLaserProfileMove

Created in NX9.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::LaserProfileMove::CollisionChecks

the Collision Check enum
Created in NX9.0.0.

Enumerator:

CollisionChecksNone	None.
CollisionChecksNozzleOnly	Nozzle Only.
CollisionChecksNozzleAndHolder	Nozzle and Holder.
CollisionChecksSolidLaserHead	Solid Laser Head.

enum NXOpen::CAM::LaserProfileMove::InterpMethods

the Interpolation Method enum
Created in NX9.0.0.

Enumerator:

InterpMethodsLinear	Linear.
InterpMethodsCubicSpline	Cubic Spline.
InterpMethodsSmooth	Smooth.

enum NXOpen::CAM::LaserProfileMove::ShapeTypes

the Shape Type enum
Created in NX9.0.0.

Enumerator:

ShapeTypesExternalTrim	External Trim.
ShapeTypesInternalTrim	Internal Trim.
ShapeTypesOpenProfile	Open Profile.

enum NXOpen::CAM::LaserProfileMove::ToolSides

the Tool Side enum
Created in NX9.0.0.

Enumerator:

ToolSidesOn	On.
ToolSidesLeft	Left.
ToolSidesRight	Right.

Member Function Documentation

NXOpen::CAM::LaserProfileMove::CollisionChecks NXOpen::CAM::LaserProfileMove::CollisionCheck ( )

Returns the Collision Check
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::LaserControlPoint* NXOpen::CAM::LaserProfileMove::CreateControlPoint	(	int	headOrientType,
		NXOpen::Point *	pointTag,
		NXOpen::CartesianCoordinateSystem *	csysTag,
		int	processType,
		bool	toggle,
		NXOpen::NXObject *	udePathTag,
		int	pointType
	)

Create a new Laser Control Point.

Returns: the control points
Created in NX9.0.0.

License requirements : cam_base ("CAM BASE")

Parameters

headOrientType	head orient type
pointTag	the point
csysTag	the csys
processType	point process type
toggle	events toggle
udePathTag	the ude path
pointType	point type

NXOpen::CAM::LaserCutDirection* NXOpen::CAM::LaserProfileMove::CutDirection ( )

Returns the Cut Direction
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::LaserHeadOrientation* NXOpen::CAM::LaserProfileMove::HeadOrientation ( )

Returns the Head Orientation
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::LaserProfileMove::InterpMethods NXOpen::CAM::LaserProfileMove::InterpMethod ( )

Returns the Interpolation Method
Created in NX9.0.0.

License requirements : None

NXOpen::CAM::LaserControlPointList* NXOpen::CAM::LaserProfileMove::List ( )

Returns the List
Created in NX9.0.0.

License requirements : None

double NXOpen::CAM::LaserProfileMove::MaxGapDist ( )

Returns the Max Gap Distance
Created in NX9.0.0.

License requirements : None

double NXOpen::CAM::LaserProfileMove::MaxTiltAngle ( )

Returns the Max Tilt Angle
Created in NX9.0.0.

License requirements : None

NXOpen::Section* NXOpen::CAM::LaserProfileMove::ProfileSection ( )

Returns the Profile Section
Created in NX9.0.0.

License requirements : None

void NXOpen::CAM::LaserProfileMove::SetCollisionCheck ( NXOpen::CAM::LaserProfileMove::CollisionChecks type )

Sets the Collision Check
Created in NX9.0.0.