Represents the Circular Move To Point Builder
To create a new instance of this class, use CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder

Created in NX5.0.0. More...

Inheritance diagram for NXOpen::CAM::CircularAboutAxisMoveBuilder:

Public Types
enum	AxisType { AxisTypeTool, AxisTypeVector }
	the axis type More...

enum	EndType { EndTypeAngle, EndTypePoint }
	the motion end type More...

enum	ExtensionType { ExtensionTypeAngle, ExtensionTypeDistance }
	the extension type More...

Public Types inherited from NXOpen::CAM::MoveBuilder
enum	Feed { FeedMotion, FeedCustom }
	the feed Type More...

enum	Motion { MotionRapid = 1, MotionEngage, MotionCut, MotionStepover, MotionRetract, MotionApproach, MotionTraversal, MotionDeparture, MotionReturn, MotionFirstCut }
	the motion Type More...

Public Member Functions
NXOpen::Direction *	ArcAxis ()
	Returns the arc axis Created in NX5.0.0.

NXOpen::CAM::CircularAboutAxisMoveBuilder::AxisType	ArcAxisType ()
	Returns the axis type Created in NX5.0.0.

NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtensionType	ArcExtendMethod ()
	Returns the arc extension type Created in NX5.0.0.

NXOpen::Point *	CenterPoint ()
	Returns the center Created in NX5.0.0.

NXOpen::Point *	EndPoint ()
	Returns the arc end point Created in NX5.0.0.

double	ExtendAngle ()
	Returns the extend angle Created in NX5.0.0.

double	ExtendDistance ()
	Returns the extend distance Created in NX5.0.0.

NXOpen::CAM::CircularAboutAxisMoveBuilder::EndType	MotionEndType ()
	Returns the arc end type Created in NX5.0.0.

void	SetArcAxis (NXOpen::Direction *vec)
	Sets the arc axis Created in NX5.0.0.

void	SetArcAxisType (NXOpen::CAM::CircularAboutAxisMoveBuilder::AxisType axisType)
	Sets the axis type Created in NX5.0.0.

void	SetArcExtendMethod (NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtensionType arcExtendMethod)
	Sets the arc extension type Created in NX5.0.0.

void	SetCenterPoint (NXOpen::Point *location)
	Sets the center Created in NX5.0.0.

void	SetEndPoint (NXOpen::Point *location)
	Sets the arc end point Created in NX5.0.0.

void	SetExtendAngle (double extendAngle)
	Sets the extend angle Created in NX5.0.0.

void	SetExtendDistance (double extendDistance)
	Sets the extend distance Created in NX5.0.0.

void	SetMotionEndType (NXOpen::CAM::CircularAboutAxisMoveBuilder::EndType arcEndType)
	Sets the arc end type Created in NX5.0.0.

void	SetSweepAngle (double sweepAngle)
	Sets the sweep angle Created in NX5.0.0.

double	SweepAngle ()
	Returns the sweep angle Created in NX5.0.0.

Public Member Functions inherited from NXOpen::CAM::MoveBuilder
double	FeedRate ()
	Returns the feed rate Created in NX5.0.0.

NXOpen::CAM::MoveBuilder::Feed	FeedType ()
	Returns the feed type Created in NX5.0.0.

NXOpen::CAM::FeedRateUnit	FeedUnit ()
	Returns the feed unit Created in NX7.5.0.

NXOpen::CAM::UdeParameter *	GetUserParameter (const NXString &parameterName)
	Returns the custom parameter with the given name.

NXOpen::CAM::UdeParameter *	GetUserParameter (const char *parameterName)
	Returns the custom parameter with the given name.

NXOpen::CAM::UdeParameter *	GetUserParameter (int index)
	Returns the parameter at the input index.

NXOpen::CAM::MoveBuilder::Motion	MotionType ()
	Returns the motion type Created in NX5.0.0.

int	NumberOfUserParameters ()
	Returns the number of user parameters Created in NX8.0.0.

bool	ProtectedMove ()
	Returns the protected move status Created in NX5.0.0.

void	SetFeedRate (double feedRate)
	Sets the feed rate Created in NX5.0.0.

void	SetFeedType (NXOpen::CAM::MoveBuilder::Feed feedType)
	Sets the feed type Created in NX5.0.0.

void	SetFeedUnit (NXOpen::CAM::FeedRateUnit unit)
	Sets the feed unit Created in NX7.5.0.

void	SetMotionType (NXOpen::CAM::MoveBuilder::Motion motionType)
	Sets the motion type Created in NX5.0.0.

void	SetParent (NXOpen::CAM::CAMObject *parent)
	Set parent Created in NX5.0.0.

void	SetProtectedMove (bool protectedMove)
	Sets the protected move status Created in NX5.0.0.

void	SetSibling (NXOpen::CAM::CAMObject *sibling)
	Set sibling Created in NX5.0.0.

void	SetSubopLabel (const NXString &subopLabel)
	Sets the subop label Created in NX8.5.1.

void	SetSubopLabel (const char *subopLabel)
	Sets the subop label Created in NX8.5.1.

NXString	SubopLabel ()
	Returns the subop label Created in NX8.5.1.

Public Member Functions inherited from NXOpen::Builder
NXOpen::NXObject *	Commit ()
	Commits any edits that have been applied to the builder.

void	Destroy ()
	Deletes the builder, and cleans up any objects created by the builder.

std::vector< NXOpen::NXObject * >	GetCommittedObjects ()
	For builders that create more than one object, this method returns the objects that are created by commit.

NXOpen::NXObject *	GetObject ()
	Returns the object currently being edited by this builder.

void	ShowResults ()
	Updates the model to reflect the result of an edit to the model for all builders that support showing results.

virtual bool	Validate ()
	Validate whether the inputs to the component are sufficient for commit to be called.

Public Member Functions inherited from NXOpen::TaggedObject
tag_t	GetTag () const
	<b>Deprecated</b>:<br> Use Tag instead.

tag_t	Tag () const
	Returns the tag of this object.

Detailed Description

Represents the Circular Move To Point Builder
To create a new instance of this class, use CAM::MoveCollection::CreateCircularAboutAxisMoveBuilder

Created in NX5.0.0.

Member Enumeration Documentation

enum NXOpen::CAM::CircularAboutAxisMoveBuilder::AxisType

the axis type

Enumerator:

AxisTypeTool	Tool Axis.
AxisTypeVector	Vector.

enum NXOpen::CAM::CircularAboutAxisMoveBuilder::EndType

the motion end type

Enumerator:

EndTypeAngle	Angle.
EndTypePoint	Point.

enum NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtensionType

the extension type

Enumerator:

ExtensionTypeAngle	Angle.
ExtensionTypeDistance	Distance.

Member Function Documentation

NXOpen::Direction* NXOpen::CAM::CircularAboutAxisMoveBuilder::ArcAxis ( )

Returns the arc axis
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::CircularAboutAxisMoveBuilder::AxisType NXOpen::CAM::CircularAboutAxisMoveBuilder::ArcAxisType ( )

Returns the axis type
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtensionType NXOpen::CAM::CircularAboutAxisMoveBuilder::ArcExtendMethod ( )

Returns the arc extension type
Created in NX5.0.0.

License requirements : None

NXOpen::Point* NXOpen::CAM::CircularAboutAxisMoveBuilder::CenterPoint ( )

Returns the center
Created in NX5.0.0.

License requirements : None

NXOpen::Point* NXOpen::CAM::CircularAboutAxisMoveBuilder::EndPoint ( )

Returns the arc end point
Created in NX5.0.0.

License requirements : None

double NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtendAngle ( )

Returns the extend angle
Created in NX5.0.0.

License requirements : None

double NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtendDistance ( )

Returns the extend distance
Created in NX5.0.0.

License requirements : None

NXOpen::CAM::CircularAboutAxisMoveBuilder::EndType NXOpen::CAM::CircularAboutAxisMoveBuilder::MotionEndType ( )

Returns the arc end type
Created in NX5.0.0.

License requirements : None

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetArcAxis ( NXOpen::Direction * vec )

Sets the arc axis
Created in NX5.0.0.

License requirements : None

Parameters

vec vec

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetArcAxisType ( NXOpen::CAM::CircularAboutAxisMoveBuilder::AxisType axisType )

Sets the axis type
Created in NX5.0.0.

License requirements : None

Parameters

axisType axistype

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetArcExtendMethod ( NXOpen::CAM::CircularAboutAxisMoveBuilder::ExtensionType arcExtendMethod )

Sets the arc extension type
Created in NX5.0.0.

License requirements : None

Parameters

arcExtendMethod arcextendmethod

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetCenterPoint ( NXOpen::Point * location )

Sets the center
Created in NX5.0.0.

License requirements : None

Parameters

location location

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetEndPoint ( NXOpen::Point * location )

Sets the arc end point
Created in NX5.0.0.

License requirements : None

Parameters

location location

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetExtendAngle ( double extendAngle )

Sets the extend angle
Created in NX5.0.0.

License requirements : None

Parameters

extendAngle extendangle

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetExtendDistance ( double extendDistance )

Sets the extend distance
Created in NX5.0.0.

License requirements : None

Parameters

extendDistance extenddistance

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetMotionEndType ( NXOpen::CAM::CircularAboutAxisMoveBuilder::EndType arcEndType )

Sets the arc end type
Created in NX5.0.0.

License requirements : None

Parameters

arcEndType arcendtype

void NXOpen::CAM::CircularAboutAxisMoveBuilder::SetSweepAngle ( double sweepAngle )

Sets the sweep angle
Created in NX5.0.0.

License requirements : None

Parameters

sweepAngle sweepangle

double NXOpen::CAM::CircularAboutAxisMoveBuilder::SweepAngle ( )

Returns the sweep angle
Created in NX5.0.0.

License requirements : None

The documentation for this class was generated from the following file:

CAM_CircularAboutAxisMoveBuilder.hxx

Public Types

Public Member Functions

Detailed Description

Member Enumeration Documentation

Member Function Documentation