NOTE: If you use too large a speckle tolerance, you might also erase
line segments that should show.&SPKTOL
Controls the speckle tolerance used for hidden line removal operations.
Speckles occur at common surface edges, where line segments overlap the part surface as a result of a hidden line removal operation. The speckle tolerance controls the minimum length of speckles permited to remain after hidden line processing.
NOTE: If you use too large a speckle tolerance, you might also erase
line segments that should show.
For more details concerning clipping and speckle tolerances, refer to the Gateway Online Help.
Read/Write - Number - .001 - .10 English, .025 - 2.0 Metric