设置对象字体

Synopsis

FONT/{SOLID|DASH|PHANTM|CENTER}

Description

Determines the type of font which to use in the creation of an object.

Parameters

Parameter

Description

SOLID

Minor word which indicates that the system font parameter is to be set to Solid. This type of line may be used for visible objects in the model.

DASH

Minor word which indicates that the system font parameter is to be set to Dash. A dashed line consists of uniform lengths and spaces. This type of line may be used for hidden objects or as a visual aid.

PHANTOM

Minor word which indicates that the system font parameter is to be set to Phantom. A phantom line consists of one long and two short segments separated by uniform spaces. This type of line may be used for imaginary outlines or as a visual aid.

CENTER

Minor word which indicates that the system font parameter is to be set to Center. A center line consists of one long and one short segment separated by uniform spaces. This type of line is primarily used for centerline objects.

Parameter	Description
SOLID	Minor word which indicates that the system font parameter is to be set to Solid. This type of line may be used for visible objects in the model.
DASH	Minor word which indicates that the system font parameter is to be set to Dash. A dashed line consists of uniform lengths and spaces. This type of line may be used for hidden objects or as a visual aid.
PHANTOM	Minor word which indicates that the system font parameter is to be set to Phantom. A phantom line consists of one long and two short segments separated by uniform spaces. This type of line may be used for imaginary outlines or as a visual aid.
CENTER	Minor word which indicates that the system font parameter is to be set to Center. A center line consists of one long and one short segment separated by uniform spaces. This type of line is primarily used for centerline objects.