Tolerance Type

Synopsis

&TOLER

Description

Controls the tolerance display for all dimensions.

Characteristics

Read/Write - Number - [1..13]

Constant Values

1 = &NOTOL
2 = &LIMSA
3 = &LIMDA
4 = &BILS
5 = &BILD
6 = &UNILA
7 = &UNILB
8 = &BASIC
9 = &REF
10 = &LIMSB
11 = &LIMDB
12 = No defined value
13 = No defined value

Parameters

Parameter

Description

&NOTOL

GPA that indicates that no tolerance is to be displayed.

&LIMSA

GPA that indicates that the tolerance limits are to be displayed on a single line. The lower limit will be first.

&LIMDA

GPA that indicates that the tolerance limits are to be displayed on two lines. The upper limit will be on the top line.

&BILS

GPA that indicates that a single plus and minus tolerance value is to be displayed. The upper tolerance value will be used to display the single tolerance.

&BILD

GPA that indicates that a bilateral tolerance will be displayed on two lines. The upper tolerance value will be used for the plus tolerance, and the lower tolerance value will be used for the minus tolerance.

&UNILA

GPA that indicates that a unilateral tolerance will be displayed on two lines using the upper tolerance value as the plus tolerance. The minus tolerance will always be zero.

&UNILB

GPA that indicates that a unilateral tolerance will be displayed on two lines using the lower tolerance value as the minus tolerance. The plus tolerance will always be zero.

&BASIC

GPA that indicates that the dimension text will be enclosed in a box to represent a basic tolerance.

&REF

GPA that indicates that the dimension text will be displayed in parentheses to represent a reference dimension.

&LIMSB

GPA that indicates that the tolerance limits are to be displayed an a single line with the larger limit first. This is the opposite action of the &LIMSA option.

&LIMDB

GPA that indicates that the tolerance limits are to be displayed on two lines with the larger limit on the second line. This is the opposite action of the &LIMDA option.

12
(No defined value)

GPA that indicates a 'Not to Scale' tolerance type. Displays dimension text with an underscore.

13
(No defined value)

GPA that indicates a 'Diameter Reference' tolerance type. The dimension text including the diameter/radius symbol is displayed in parentheses.

Parameter	Description
&NOTOL	GPA that indicates that no tolerance is to be displayed.
&LIMSA	GPA that indicates that the tolerance limits are to be displayed on a single line. The lower limit will be first.
&LIMDA	GPA that indicates that the tolerance limits are to be displayed on two lines. The upper limit will be on the top line.
&BILS	GPA that indicates that a single plus and minus tolerance value is to be displayed. The upper tolerance value will be used to display the single tolerance.
&BILD	GPA that indicates that a bilateral tolerance will be displayed on two lines. The upper tolerance value will be used for the plus tolerance, and the lower tolerance value will be used for the minus tolerance.
&UNILA	GPA that indicates that a unilateral tolerance will be displayed on two lines using the upper tolerance value as the plus tolerance. The minus tolerance will always be zero.
&UNILB	GPA that indicates that a unilateral tolerance will be displayed on two lines using the lower tolerance value as the minus tolerance. The plus tolerance will always be zero.
&BASIC	GPA that indicates that the dimension text will be enclosed in a box to represent a basic tolerance.
&REF	GPA that indicates that the dimension text will be displayed in parentheses to represent a reference dimension.
&LIMSB	GPA that indicates that the tolerance limits are to be displayed an a single line with the larger limit first. This is the opposite action of the &LIMSA option.
&LIMDB	GPA that indicates that the tolerance limits are to be displayed on two lines with the larger limit on the second line. This is the opposite action of the &LIMDA option.
12 (No defined value)	GPA that indicates a 'Not to Scale' tolerance type. Displays dimension text with an underscore.
13 (No defined value)	GPA that indicates a 'Diameter Reference' tolerance type. The dimension text including the diameter/radius symbol is displayed in parentheses.